HMC412AMS8G / 412AMS8GE v00.0910 10 DOUBLE-BALANCED MIXER, 9 - 15 GHz Typical Applications Features The HMC412AMS8G / HMC412AMS8GE is ideal for: Conversion Loss: 8 dB * Long Haul Radio Platforms Noise Figure: 8 dB * Microwave Radio Input IP3: 19 dBm * VSAT No External Components Mixers - SINGLE & DOUBLE BALANCED - SMT MSOP8G SMT Package Functional Diagram General Description The HMC412AMS8G & HMC412AMS8GE are passive double balanced mixers that operate between 9.0 GHz and 15 GHz. The HMC412AMS8G(E) operate with LO drive levels between +9 dBm and +13 dBm, and provides 8 dB conversion loss across the entire specified frequency band. This mixer requires no external components or bias. Electrical Specifications, TA = +25 C IF = 1.45 GHz LO = +13 dBm Parameter Min. Typ. Units Max. Frequency Range, RF & LO 9.0 - 15.0 GHz Frequency Range, IF DC - 2.5 GHz Conversion Loss 8 11 dB Noise Figure (SSB) 8 11 dB LO to RF Isolation 30 44 dB LO to IF Isolation 33 42 dB RF to IF Isolation 8 30 dB IP3 (Input) 14 19 dBm 1 dB Compression (Input) 7 11.5 dBm * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 10 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC412AMS8G / 412AMS8GE v00.0910 DOUBLE-BALANCED MIXER, 9 - 15 GHz Conversion Gain vs. Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm 0 ISOLATION (dB) CONVERSION GAIN (dB) -10 RF/IF LO/RF LO/IF -5 -10 +25C +85C -40C -15 -20 -40 -50 -60 -20 8 9 10 11 12 13 14 15 8 16 9 10 11 12 13 14 15 16 14 15 16 15 16 FREQUENCY (GHz) FREQUENCY (GHz) Conversion Gain vs. LO Drive Return Loss @ LO = +13 dBm 0 0 -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 10 -30 -10 +7 dBm +9 dBm +11 dBm +13 dBm +15 dBm -15 -10 -15 RF LO -20 -25 -20 8 9 10 11 12 13 14 15 8 16 9 10 11 12 13 FREQUENCY (GHz) FREQUENCY (GHz) Upconverter Performance Conversion Gain @ LO = +13 dBm IF Bandwidth @ LO = +13 dBm 0 0 CONVERSION GAIN (dB) RESPONSE (dB) -5 -10 -15 -20 CG IF RL -25 -30 -5 -10 Mixers - SINGLE & DOUBLE BALANCED - SMT 0 -15 -20 0 0.5 1 1.5 2 IF FREQUENCY (GHz) 2.5 3 8 9 10 11 12 13 14 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC412AMS8G / 412AMS8GE v00.0910 DOUBLE-BALANCED MIXER, 9 - 15 GHz Input IP3 vs. Temperature @ LO = +13 dBm* Input IP3 vs. LO Drive* 30 LO = +11 dBm LO = +13 dBm LO = +15 dBm +25C +85C -40C 25 IP3 (dBm) IP3 (dBm) 25 20 15 20 15 10 10 9 10 11 12 13 14 15 16 17 9 10 11 FREQUENCY (GHz) 12 13 14 15 16 17 15 16 FREQUENCY (GHz) Input P1dB vs. Temperature @ LO = +13 dBm Input IP2 vs. LO Drive * 90 15 14 80 13 LO = +11 dBm LO = +13 dBm LO = +15 dBm 12 P1dB (dBm) 70 IP2 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 30 60 50 11 10 9 +25C +85C -40C 8 7 40 6 5 30 9 10 11 12 13 14 15 16 17 8 9 10 11 12 13 14 FREQUENCY (GHz) FREQUENCY (GHz) MxN Spurious @ IF Port Harmonics of LO nLO nLO Spur @ RF Port mRF 0 1 2 3 4 LO Freq. (GHz) 1 2 3 4 0 xx 9 28 41 N/A 9 41 33 56 55 1 34 0 38 37 41 10.5 44 45 57 71 2 >85 >85 71 >85 >85 12 47 52 52 N/A 3 >85 >85 >85 >85 >85 13.5 43 60 60 N/A 4 N/A >85 >85 >85 >85 15 37 63 55 N/A 16.5 32 67 50 N/A RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +13 dBm All values in dBc relative to the IF. Measured as downconverter. LO = +13 dBm All values in dBc below input LO level @ RF port. * Two-tone input power= -10 dBm each tone, 1 MHz spacing. 10 - 3 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC412AMS8G / 412AMS8GE v00.0910 DOUBLE-BALANCED MIXER, 9 - 15 GHz Absolute Maximum Ratings +24 dBm LO Drive +24 dBm Channel Temperature 150 C IF DC current 4mA Continuous Pdiss ( T = 85C) (derate 4.3mW / C above 85 C 280 mW Thermal Resistance (channel to ground paddle) 230.5 C/W Storage Temperature -65 to + 150 C Operating Temperature -55 to + 85 C ESD Sensitivity (HBM) Class 1A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC412AMS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC412AMS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 10 Mixers - SINGLE & DOUBLE BALANCED - SMT RF/IF Input Package Marking [3] H412A XXXX H412A XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 HMC412AMS8G / 412AMS8GE v00.0910 DOUBLE-BALANCED MIXER, 9 - 15 GHz Pin Descriptions Mixers - SINGLE & DOUBLE BALANCED - SMT 10 10 - 5 Pin Number Function Description 1, 8 GND Ground: These pins and the exposed ground paddle must be connected to RF ground. 2 LO This pin is AC coupled and matched to 50 Ohms. 3, 4, 6 N/C No Connection: These pins are not connected internally. 5 IF IF Port: This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 7 RF This pin is AC coupled and matched to 50 Ohms. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC412AMS8G / 412AMS8GE v00.0910 DOUBLE-BALANCED MIXER, 9 - 15 GHz Evaluation PCB List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI J3 PCB Mount SMA Connector, Johnson U1 HMC412AMS8G / HMC412AMS8GE Mixer PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Mixers - SINGLE & DOUBLE BALANCED - SMT 10 10 - 6