.150" x .200" SERIES 6308 .031" Square Post Press-Fit Contacts Ordering Code Features 00 Typical Example 6308 006 313 SERIES 6308 001 Designed for press-fit mounting in plated-thru holes Available in four and six contact modules Modules can be arranged to custom design press-fit card-edge connectors Lets you update your packaging scheme while maintaining existing contact spacing Press-fit system provides highly reliable gas-tight electrical and mechanical connection Tapered single beam contact offers very low contact resistance .150" x 200" grid pattern U.L. approved Specifications Current rating: 5 amperes, maximum Contact resistance: 6 milliohms, maximum Contact material: Phosphor bronze NUMBER OF CONTACTS 6308 DUAL READ-OUT 4 Contact plating:* Selective: 50-150 microinches nickel, 10 microinches min. gold-mating area only, 3-5 microinches gold flash on tail, balance bare nickel Overall: 50-100 microinches nickel and 10 microinches min. gold overall Insertion/withdrawal force: 2 to 12 ounces per contact pair, nominal P.C. card Insulator material: Polyester Insulation resistance: 5000 megohms, minimum, at 500 VDC Dielectric withstanding voltage: 1200 VAC between adjacent contacts, RMS, at sea level 6 004 End module (one closed end) 006 Center module (open ends) CONTACT CODE 313 60-6308-0213 (.372 tail length) 320 60-6308-0223 (.592 tail length) VARIATION CODE 6308 Plating Selective Overall 808 008 811 011 *For other type platings please consult factory. (6 center module) (4 end module) POLARIZATION Order polarizing insert separately by part number 60-6064-3317; fits between contacts. 7