W005G - W10G
W005G - W10G, Rev. A2
W005G - W10G
1.5 Ampere Glass Passivated Bridge Rectifiers
Absolute Maximum Ratings* TA = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
**Device mounted on PCB with 0.375" (9.5 mm) lead length.
Electrical Characteristics TA = 25°C unless otherwise noted
2001 Fairchild Semiconductor Corporation
Features
•Surge overload rating: 50 amperes
peak.
•Glass passivated junction.
•Ideal for printed circuit board.
• Reliable low cost construction technique
results in inexpensive product.
•UL certified, UL #E96005.
Symbol
Parameter
Device
Units
005G 01G 02G 04G 06G 08G 10G
VRRM Maximum Repetiti ve Reverse Voltage 50 100 200 400 600 800 1000 V
VRMS Maximum RMS Bridge Input V ol tage 35 70 140 280 420 560 700 V
VR DC Reverse Vo l tage (Rated V R) 50 100 200 400 600 800 1000 V
IRM Maximum I nstant aneous Reverse Leakage, total
bridge @ rated V R TA = 25°C
T
A = 125°C
5.0
500
µA
µA
VFM Maximum I nstant aneous Forward Voltage Drop,
per bridge @ 1.0 A 1.0
V
I
2t rating f or fusing t < 8.3 ms 10 A2s
C Typical J unction Capacitance, per l eg
V
R = 4.0 V, f = 1.0 MHz 15 pF
Symbol
Parameter
Value
Units
IF(AV) Average Rectified Current
@ TA = 50°C 1.5 A
IFSM Non-repetiti ve Peak Forward Surge Current
8.3 ms single hal f -sine-wave
Superimposed on rated load (JEDEC method)
50
A
PD Total Device Dissipation
Derate above 25°C 3.47
28 W
mW/°C
RθJA Therm al Resistanc e, Jun ction to Ambient,** per leg 36 °C/W
RθJL Therm al Resistanc e, Jun ction to Lead,** per leg 11 °C/W
Tstg Sto rage Tem perat u re Range -55 to +150 °C
TJ Operatin g Jun ct ion Tem p eratu re -55 to +150 °C
WOB
+~~-
W005G - W10G, Rev. A2
W005G - W10G
Glass Passivated Bridge Rectifiers
(continued)
Typical Characteristics
For ward Current Derating Curve
25 50 75 100 125 150 175
0
0.5
1
1.5
2
AMBI ENT T EMP ERATURE ( C)
FO RWAR D CU RRENT (A )
º
SINGLE PHASE
HAL F WAVE
60HZ
RESISTI VE OR
INDUCTIVE LOAD
.375" (9.0mm) LEAD
LENGTHS
Non -Repetit ive Surge Curre nt
12 51020 50100
0
10
20
30
40
50
N UMBE R OF CYCL E S AT 6 0Hz
PEAK FORWARD SURGE CURRENT (A)
Forward Charac t eristics
0 0.2 0.4 0.6 0.8 1 1.2 1.4
0.01
0.1
1
10
20
FOR WAR D VO LT A GE ( V)
FOR WAR D CU RRENT ( A)
Pulse Widt h = 300µ
µµ
µs
2% Duty Cycle
T = 25 C
º
A
Reverse Charact eri stics
0 20406080100120140
0.01
0.1
1
10
PER CE NT OF RA TED PEA K RE VER SE VOL TAGE (%)
REVE RSE CURRENT ( A)
µ
µ µ
µ
T = 2 5 C
º
A
T = 100 C
º
A
WOB (FS PKG Code R5)
WOB Package Dimensions
September 1999, Rev. A
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 1.1
0.220(5.6)
0.180(4.6) 0.220(5.6)
0.180(4.6)
0.358(9.1)
0.339(8.6)
1.0(25.4)
MIN
0.217(5.5)
0.197(5.0)
1.2(30.5)
MIN
0.032(.81)
0.030(.76)
DIA
POS.LEAD
+_
~
~
∅
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
SMART ST ART™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
Rev . G
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
F ACT Quiet Series™
FAST
SyncFET™
TinyLogic™
UHC™
VCX™
