NX7527BF-AA - California Eastern Laboratories / NEC

NEC's 1550 nm InGaAsP MQW FP

PULSED LASER DIODE

IN COAXIAL PACKAGE

FOR OTDR APPLICATION (120 mW MIN)

NX7527BF-AA

FEATURES

•HIGH OUTPUT POWER:

Pf = 120 mW at IFP = 1000 mA,

Pulse Conditions: Pulse width (PW) = 10 µs, Duty = 1%.

•LONG WAVELENGTH:

λC = 1550 nm

NEC's NX7527BF-AA is a 1550 nm Multiple Quantum Well

(MQW) structured Fabry-Perot (FP) laser diode coaxial mod-

ule with single mode fiber. This module is specified to operate

under pulsed conditions and isdesigned for a light source of

Optical Time Domain Reflectometer(OTDR).

DESCRIPTION

PART NUMBER NX7527BF-AA

SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX

VFP Forward Voltage, IFP = 1000 mA, PW = 10 µs, V 2.5 4.0

Duty = 1%

PfOptical Output Power from Fiber, IFP = 1000 mA, mW 120 145

PW = 10 µs, Duty = 1%

ITH Threshold Current mA 45 75

λCCenter Wavelength, IFP = 1000 mA, PW = 10 µs, nm 1530 1550 1570

Duty = 1%, RMS (-20)

σSpectral Width, IFP = 1000 mA, PW = 10 µs, nm 7.5 10.0

Duty = 1%, RMS (-20)

trRise Time, 10-90% ns 2.0

tfFall Time, 90-10% ns 2.0

ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C)

PART NUMBER NX7527BF-AA

SYMBOLS PARAMETERS AND CONDITIONS UNITS MIN TYP MAX

Ith Threshold Current mA 100

PfOptical Output Power from Fiber, IFP = 1000 mA, mW 60

PW = 10 µs, Duty = 1%

λCCenter Wavelength, IFP = 1000 mA, PW = 10 µs, nm 1520 1585

Duty = 1%, RMS (-20)

∆λ/∆T Temperature Dependency of Center Wavelength nm/°C 0.35

σSpectral Width, IFP = 1000 mA, PW = 10 µs, nm 10

Duty = 1%, RMS (-20)

ELECTRO-OPTICAL CHARACTERISTICS (TC = 0 to +60°C)

California Eastern Laboratories

ABSOLUTE MAXIMUM RATINGS1

(TC = 25°C, unless otherwise specified)

SYMBOLS PARAMETERS UNITS RATINGS

IFP Pulsed Forward Current2A 1.2

VRReverse Voltage V 2.0

TCOperating Case Temperature °C -20 to +60

TSTG Storage Temperature °C -40 to +85

TSLD Lead Soldering °C 260

Temperature (10 sec)

RH Relative Humidity

(noncondensing) % 85

OPTICAL OUTPUT POWER FROM FIBER vs.

LD PULSE FORWARD CURRENT

Wavelength, λ (nm)

Relative Intensity, (Linear Scale)

SPECTRUM

Optical Output Power from Fiber, P

(mW)

Pulsed Forward Current, IFP (mA)

TYPICAL PERFORMANCE CURVES (TC = 25°C, unless otherwise specified)

Notes:

1. Operation in excess of any one of these parameters may result

in permanent damage.

2. Pulse Condition: Pulse Width (PW) = 10 µs, Duty = 1 %.

NX7527BF-AA

160

200 10008006004000

100

120

140

= 25°C

60°C

PW = 10µs

Duty = 1%

1550 5 nm/div

ORDERING INFORMATION

PART NUMBER FLANGE TYPE

NX7527BF-AA-AZ* Flat Mount Flange

*Note:

Please refer to the last page of this data sheet. "Compliance with

EU Directives" for Pb-Free RoHS Compliance Information.

Remark: The graphs indicate nominal characteristics.

NX7527BF-AA

OUTLINE DIMENSIONS (Units in mm)

φ7

Optical Fiber

SMF

Length: 1 m

2−φ2.2

φ0.45

φ0.9

φ6

P.C.D. = φ2

27.4

12.7

17.0

CASE

7.2

3.7

PIN CONNECTIONS

PARAMETER UNIT SPECIFICATION

Mode Field Diameter µm 9.3±0.5

Cladding Diameter µm 125±2

Maximum Cladding Noncircularity % 2

Maximum Core/Cladding Concentricity % 1.6

Outer Diameter mm 0.9±0.1

Cut-off Wavelength nm 1140 to 1280

Minimum Fiber Bending Radius mm 30

Fiber Length mm 1000 MIN

OPTICAL FIBER CHARACTERISTICS

Life Support Applications

These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected

to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify

CEL for all damages resulting from such improper use or sale.

Ferrule

Fiber Length: 1000 mm MIN

A Business Partner of NEC Com

ound Semiconductor Devices, Ltd

03/03/2003

3-180

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817

Telephone: (408) 919-2500

Facsimile:

(

408

)

988-0279

Subject: Compliance with EU Directives

CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant

with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous

Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive

2003/11/EC Restriction on Penta and Octa BDE.

CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates

that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are

exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.

All devices with these suffixes meet the requirements of the RoHS directive.

This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that

go into its products as of the date of disclosure of this information.

Restricted Substance

per RoHS

Concentration Limit per RoHS

(values are not yet fixed)

Concentration contained

in CEL devices

-A -AZ

Lead (Pb) < 1000 PPM Not Detected (*)

Mercury < 1000 PPM Not Detected

Cadmium < 100 PPM Not Detected

Hexavalent Chromium < 1000 PPM Not Detected

PBB < 1000 PPM Not Detected

PBDE < 1000 PPM Not Detected

If you should have any additional questions regarding our devices and compliance to environmental

standards, please do not hesitate to contact your local representative.

Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance

content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information

provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better

integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate

information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL

suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for

release.

In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to

customer on an annual basis.

See CEL Terms and Conditions for additional clarification of warranties and liability.