856882 358.4 MHz SAW Filter Applications General Purpose Wireless Wireless Infrastructure 3G, 4G, Multistandard Functional Block Diagram Bal/Bal Functional Block Diagram Bal/SE Top view Top view Gnd Gnd Gnd Gnd Gnd Gnd 9 8 9 7 Input + 10 6 Output - Gnd 11 5 Gnd Input - 12 4 Output + 1 2 10 6 Gnd Gnd 11 5 Gnd Input - 12 4 Output 1 Gnd Gnd Gnd Pin Configuration Usable bandwidth 39.6 MHz Low loss High attenuation Low EVM Balanced-Balanced or Balanced-Single ended operation Ceramic Surface Mount Package (SMP) Small Size: 7.01 x 5.51 x 1.70 mm Excellent power handling Hermetic RoHS compliant, Pb-free General Description Pin # Bal/Bal Description 10 12 4 6 1,2,3,5, 7, 8, 9, 11 Input + Input Output + Output Ground Pin # Bal/SE Description 10 12 4 1,2,3,5,6, 7, 8, 9, 11 Input + Input Output Ground Ordering Information The 856882 is a high performance IF SAW filter developed for 4G and Multistandard infrastructure applications. It features low loss with excellent attenuation, and is designed to be used with multiple impedance values and configurations. The filter is developed for excellent in-band characteristics in order to minimize system bit-error rates. (c) 2011 TriQuint Semiconductor, Inc. 3 2 Gnd Gnd Gnd Product Features Data Sheet: Rev - 7/26/11 7 Input + 3 This device is RoHS compliant and Pb-free. 8 Part No. Description 856882 856882-EVB packaged part evaluation board Standard T/R size = 3000 units/reel. Please specify the evaluation board impedance: 1. Balanced 200 input, Balance 200 output. 2. Balanced 200 input, Single-ended 50 output. 3. Balanced 100 input, Balance 100 output. - 1 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856882 358.4 MHz SAW Filter Specifications Electrical Specifications (1, 2) Specified Temperature Range: (3) -33 to +85 C Parameter (4) Center Frequency Insertion Loss Amplitude Variation(6) Absolute Group Delay Group Delay Variation(6) Time side-lobe response attenuation IIP3 Conditions At 358.4 MHz 338.6 - 378.2 MHz At 358.4 MHz 338.6 - 378.2 MHz (1.0 - 500 s) Tones 5 MHZ separated power > 5dBm per tone EVM(7) Absolute Attenuation (8) Input/Output Return Loss Source/Load Impedance (9) 10.0 - 253.4 MHz 253.4 - 270.0 MHz 270.0 - 294.4 MHz 294.4 - 312.4 MHz 312.4 - 326.4 MHz 388.4 - 404.4 MHz 404.4 - 422.4 MHz 422.4 - 463.4 MHz 463.4 - 660.0 MHz 660.0 - 780.0 MHz 780.0 - 3000 MHz 338.6 - 378.2 MHz Min Typical (5) Max Units 40 45 358.4 9.5 0.35 0.43 21 45 50 11.5 1.0 0.5 50 - MHz dB dB p-p s ns p-p dB dBm - 1.3 3 % 55 53 55 40 25 30 40 45 55 35 55 10 - 61 56 58 53 44 37 49 52 66 38 62 12 200, 100, 50 - dB dB dB dB dB dB dB dB dB dB dB dB Notes: 1. All specifications are based on the TriQuint schematics for the different impedances shown on page 3, 4 & 5. 2. An external impedance matching network with 2% tolerance will be necessary to achieve the proposed specifications. 3. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature. 4. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances. 5. Typical values are based on average measurements at room temperature. 6. These Variations are defined as the difference between the lowest loss and the highest loss within the defined frequency points. 7. Measured with an RRC filtered QPSK modulated signal with a BW of 3.84 MHz placed anywhere within 338.6 to 378.2 MHz. 8. Relative to insertion loss at center frequency. 9. See the impedance options in the ordering information section on page 1. Data Sheet: Rev - 7/26/11 (c) 2011 TriQuint Semiconductor, Inc. - 2 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856882 358.4 MHz SAW Filter Impedance option #1 - 200 Bal Input, 200 Bal Output Schematic 39pF 27nH 12 200 Balanced Input 200 4 27nH 5pF 1,2,3,5 10 7,8,9,11 200 Balanced Output 200 6 27nH 39pF Note: Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 1.34 .28 .99 1.34 .28 960686 5.71 C2 L1 L3 TriQuint 856882 JJJYHH C1 L2 C3 .99 7.21 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Notes: 1. All dimensions are in millimeters. 2. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number C1 C2 C3 L1 L2 L3 SMA PCB 5.0 pF 39 pF 39 pF 27nH 27nH 27nH N/A N/A Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% Coil Wire-wound, 0603, 5% Coil Wire-wound, 0603, 5% Coil Wire-wound, 0603, 5% SMA connector 3-layer Panasonic Panasonic Panasonic Coillcraft Coillcraft Coillcraft Johnson Components multiple ECU-V1H0050CCV ECU-V1H390KCV ECU-V1H390KCV 0603CS-27NXJBC 0603CS-27NXJBC 0603CS-27NXJBC 142-0701-801 960686 Data Sheet: Rev - 7/26/11 (c) 2011 TriQuint Semiconductor, Inc. - 3 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856882 358.4 MHz SAW Filter Impedance option #2 - 200 Bal Input, 50 SE Output Schematic 100pF 22nH 12 200 Balanced Input 4.0pF 27nH 200 4 18pF 50 Single-ended Output 50 1,2,3,5,6 10 7,8,9,11 100pF Note: Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration .28 .99 1.34 1.34 .28 5.71 TriQuint 856882 JJJYHH .99 7.21 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Notes: 3. All dimensions are in millimeters. 4. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number C1 C2 C3 C4 L1 L2 SMA PCB 100 pF 100 pF 4.0 pF 18 pF 27 nH 22 nH N/A N/A Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% Coil Wire-wound, 0603, 5% Coil Wire-wound, 0603, 5% SMA connector 3-layer Panasonic Panasonic Panasonic Panasonic MuRata MuRata Johnson Components multiple ECU-V1H101KCV ECU-V1H101KCV ECU-V1H040CCV ECU-V1H0180KCV LQW18AN27NJ00 LQW18AN22NJ00 142-0701-801 991275 Data Sheet: Rev - 7/26/11 (c) 2011 TriQuint Semiconductor, Inc. - 4 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856882 358.4 MHz SAW Filter Impedance option #3 100 Bal Input, 100 Bal Output Schematic 16nH 12 100 Balanced Input 12pF 100 4 6.0pF 4.0pF 1,2,3,5 10 7,8,9,11 16nH 13nH 100 Balanced Output 100 6 Note: Actual matching values may vary due to PCB layout and parasitic PC Board Mounting Configuration 1.34 .28 .99 1.34 .28 960686 5.71 L1 C2 C1 TriQuint 856882 JJJYHH C3 L3 L2 .99 7.21 Notes: Top, middle & bottom layers: 1 oz copper Substrates: FR4 dielectric, .031" thick Finish plating: Nickel: 3-8m thick, Gold: .03-.2m thick Hole plating: Copper min .0008m thick Notes: 5. All dimensions are in millimeters. 6. This footprint represents a recommendation only. Bill of Material Reference Desg. Value Description Manufacturer Part Number C1 C2 C3 L1 L2 L3 SMA PCB 12 pF 4.0 pF 6.0 pF 16 nH 16 nH 13 nH N/A N/A Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% Chip Ceramic, 0603, 5% Coil Wire-wound, 0603, 5% Coil Wire-wound, 0603, 5% Coil Wire-wound, 0603, 5% SMA connector 3-layer Panasonic Panasonic Panasonic MuRata MuRata MuRata Johnson Components multiple ECU-V1H120JCV ECU-V1H040CCV ECU-V1H060CCV LQW18AN16NJ00 LQW18AN16NJ00 LQW18AN13NJ00 142-0701-801 960686 Data Sheet: Rev - 7/26/11 (c) 2011 TriQuint Semiconductor, Inc. - 5 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856882 358.4 MHz SAW Filter Typical Performance (at room temperature) Data Sheet: Rev - 7/26/11 (c) 2011 TriQuint Semiconductor, Inc. - 6 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856882 358.4 MHz SAW Filter Mechanical Information Package Information, Dimensions and Marking TriQuint 856882 JJJYHH ID dot Package Style: SMP-28B Dimensions: 7.01 x 5.51 x 1.63 mm Date code Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating 0.76 1.63 NOM. 1.78 MAX. 7.01 All dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width 0.10mm 1.27 1.70 1.27 5.51 0.79 The date code consists of: day of the current year (Julian, 3 digits), Y = last digit of the year (1 digit), and HH = hour (2 digits) 1.14 Tape and Reel Information Standard T/R size = 3000 units/reel. All dimensions are in millimeters 2.7 ID dot 16.8 O330 Section A-A 4.0 0.3 2.0 O1.5 A 1.75 7.5 O102 O20.2 O13.0 Direction of travel 16.0 7.3 2.0 2.2 5.8 8.0 O1.5 A Absolute Maximum Ratings Parameter Operating Temperature range Storage Temperature range Input Power DC Voltage DC Voltage Moisture Sensitivity level Condition 24 Hrs at 50 oC, in band 24 Hrs at 50 oC, out of band Between input/output and ground Between terminals 10/12 or 4/6 Value Unit -33 to +85 -40 to +85 +19 +25 5 5 MSL3 or better o C C dBm dBm V V o Operation of this device outside the parameter ranges given above may cause permanent damage. Data Sheet: Rev - 7/26/11 (c) 2011 TriQuint Semiconductor, Inc. - 7 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R) 856882 358.4 MHz SAW Filter Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Caution! ESD-Sensitive Device Refer to Soldering Profile for recommended guidelines. ESD Rating: 1B Value: Passes 550 V min. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free ESD Rating: B Value: Passes 350 V min. Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev - 7/26/11 (c) 2011 TriQuint Semiconductor, Inc. - 8 of 8 - Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network (R)