NOTES: ASTERISK (#) MATERIALS AND FINISHES: BAYONET SLEEVE BODIES - BRASS, NICKEL PLATING (.000100/.000250) THICK - BRASS, NICKEL PLATING (.000100/.000250) THICK WASHER - BRASS, NICKEL PLATING (.000100/.000250) THICK CLAMP = - BRASS, NICKEL PLATING (.000100/.000250) THICK CONTACT - BeCu, GOLD PLATING (.90005/.0001 THICK) OVER NICKEL OUTER CONTACT - BeCu, GOLD PLATING (.00005/.0001 THICK) OVER NICKEL REAR GASKET - FLUOROSILICONE, COLOR: BLUE FRONT GASKET -SILICONE RUBBER INSULATORS - PTFE SPACER - BRASS, NICKEL PLATING .000100/.000250) THICK RETAINING RING - BRASS, NICKEL PLATING (.000100/.000250) THICK SPRING WASHER - BeCu, GOLD PLATING (.00005/.0001 THICK) OVER NICKEL FERRULE - COPPER TUBING, NICKEL PLATING (.000190/.000250) THICK ELECTRICAL: A. IMPEDANCE: NON-CONSTANT CAN BE USED WITH 50,75 AND 93 OHM TRIAXIAL CABLES B. FREQUENCY RANGE: DC - 500 mHz ENVIRONMENTAL: A. THERMAL: -65C TO + 165 FOR ASSEMBLY INSTRUCTIONS SEE 9-9950-223. FERRULE TO BE CRIMPED WITH A .178 HEX DIE. CONTACT TO BE SOLDERED. INDICATES CABLE ENTRY DIMENSIONS. 31-30240-62 REVISIONS DRAWING NO. DESCRIPTION DATE ECO APPR THIRD ANGLE PROJ. @ 4 RELEASE TO MFG. 3/22/10 48022 140 "gt STAMPING NOTE UPDATED 71/12/10 48129 KR POLARITY STAMP "AMPHENOL 31-30240-62" "STSM1344SS3C" DATE CODE. PER MIL-STD 1285 (ON 3 LINES) 1.30 REF \ CUSTOMER OUTLINE DRAWING SCALE 1.000 ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY H+ G1 238 @.1|80% 1.89 REF GZ 024% CONTACT 1.0. SECTION A-A UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES AND TOLERANCES ARE: 2 PLACE DECIMAL +.015 MATERIAL 3 PLACE DECIMAL .005 (0,127 mm) ANGLES (0,381 mm) + 1 NOTICE - These drawings, specifications, or other data (I) are, and remain the property of Amphenol Corp. (2) must be returned upon request; and (3) are confidential and not to be disclosed to any person other than those to whom they are given by Amphenol Corp. other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be regarded by implication or otherwise in any manner licensing, granting rights or permitting such holder or any other person to manufacture, use or sell any product, process or design, patented or otherwise, that may in any way be related to or disclosed by said drawings, specifications, or other data. DRAWN NISCHIT MV DATE 12-Mar-10 ENGINEER NISCHIT MV REFERENCE The furnishing of these drawings, specifications, or DATE 12-Mar-10 APPROVED K. CAPOZZ| DATE 3/19/10 TITLE BNC TRIAX PLUG FOR BOEING 9M2559 AND 3M2397 CABLE Amphenol Danbury, CT, Tainan, Shenzhen, RF USA Taiwan China www.amphenolrf.com SCALE: 6.0:1 | SHEET 2 OF 2 CAD FILE 31-30240-62 CODE ID 14868] B DWG SIZE|DRAWING NO. 31 - 30240-62 REV B