KEY FEATURES
•2:1shrinkratioforallstandardsizes
•Tough,veryexible,very-thin-wall
insulation
•Highame-resistancemeetingtherequire-
mentsofAMS-DTL-23053,TestC,and
ASTMD2671,ProcedureC.
•Hightemperatureperformancethatmeets
orexceedsmilitaryandindustrialstandards
•Protectionfrommostindustrialsolvents,
fuels,andchemicals
•MeetsNASAoutgassingrequirements
APPLICATIONS
•Downholeoilandgasexplorationtools
•Militaryandcommercialaircraft
•Satellites
•Automotiveengines
•Industrialequipment
•Batterycovers
ELECTRICAL
•Providesexcellentelectricalinsulation
•Notrecommendedforuseasaprimaryinsulatorattemperaturesexceeding135°C
[275°F]
MECHANICAL
•Toughuoropolymermaterialprovidesabrasionandcut-throughresistance
•Providesstrainreliefwheninstalledondelicateelectricalconnectionsandtermina-
tions
TEMPERATURE RATING
•Fullrecoverytemperature:130°C[266°F]
•Operatingtemperaturerange:-70°Cto200°C[-94°Fto392°F]
STANDARDS AND SPECIFICATIONS
•RW-1200
•SAE-AMS-DTL-23053/18,Class3
ORDERING INFORMATION
•Color:Clear(-X)Standard;othercolorsavailableonrequest
•Standardpackaging:Onspools(-SP),varyinglengths(consultTEfordetails)
•Orderingdescription:Specifyproductname,size,colorandpackaging;forexample,
HT-200-3/16-X-SP.
HT-200
Introducing
HT-200heat-shrinkabletubingisaveryexible,highlyame-resistant,high-
clarity,high-temperature,chemical-resistanttubingmadefromauoropolymer
material.Itprovidesvery-thin-wallinsulationandstrainreliefofmultipin
connectors,solderjointsandotherdelicateelectricalconnectionsand
terminations.Itiswell-suitedforapplicationsthatrequiredensepackingof
componentsorvisualinspectionofcoveredcomponentssuchasdownhole
sensors.Itisespeciallysuitableforapplicationsrequiringsuperiorchemicaland
solventresistance.Itshightemperatureperformancemeetsorexceedsmilitary
andindustrialstandards.HT-200meetsNASAoutgassingrequirementsmaking
itsuitableforuseinspaceapplicationssuchassatellites.
te.com/products/HT-200
1-1773730-2 APP 5/2014
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
Size Minimum
Expanded I.D. (D)
Maximum
Recovered I.D. (d)
Nominal Recovered
Jacket Wall (W)
in. mm. in. mm. in. mm.
3/64 .046 1.17 .023 .58 .010±.002 .25±.051
1/16 .063 1.60 .031 .79 .010±.002 .25±.051
3/32 .093 2.36 .046 1.17 .010±.002 .25±.051
1/8 .125 3.18 .062 1.58 .010±.002 .25±.051
3/16 .187 4.75 .093 2.36 .010±.002 .25±.051
1/4 .250 6.35 .125 3.18 .012±.003 .30±.076
3/8 .375 9.53 .187 4.75 .012±.003 .30±.076
1/2 .500 12.70 .250 6.35 .012±.003 .30±.076
3/4 .750 19.05 .375 9.53 .017±.003 .43±.076
11.000 25.40 .500 12.70 .019±.003 .48±.076
HT-200 DIMENSIONS
Dd
W
Expanded as supplied
Fully recovered after heating
HT-200TE Connectivity
te.com/products/HT-200
1-1773730-2 APP 5/2014
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
HT-200 ORDERING DESCRIPTION
HT-200-3/8-X-SP
SpoolPackaging
ColorisClear
Size
VeryFlexible,VeryThinWallProduct
SAMPLE INVENTORY
Material Description Material Number
HT-200-3/64-X-SP CV4354-000
HT-200-1/16-X-SP CV4355-000
HT-200-3/32-X-SP CV4356-000
HT-200-1/8-X-SP CV4357-000
HT-200-3/16-X-SP CV4358-000
Material Description Material Number
HT-200-1/4-X-SP CV4359-000
HT-200-3/8-X-SP CV4360-000
HT-200-1/2-X-SP CV4361-000
HT-200-3/4-X-SP CV4362-000
HT-200-1-X-SP CV4363-000
HT-200TE Connectivity
te.com/products/HT-200
1-1773730-2 APP 5/2014
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
PRODUCT OFFERING
HT-200-3/64-X-SP
HT-200-1/16-X-SP
HT-200-3/32-X-SP
HT-200-1/8-X-SP
HT-200-3/16-X-SP
HT-200-1/4-X-SP
HT-200-3/8-X-SP
HT-200-1/2-X-SP
HT-200-3/4-X-SP
HT-200-1-X-SP
Property Unit Requirement Test Method
PHYSICAL
Dimensions
LongitudinalChange
Inch(mm)
Percent
Asshownon
HT-200Dimensionstable
+0,-10maximum
ASTMD2671NOTE1
TensileStrength
UltimateElongation
psi(MPa)
Percent
1500(10.3)minimum
250minimum
RW-1200,Section4.3.1
ASTMD2671
Concentricity(Expanded) Percent 70minimum ASTMD2671
SecantModulus(Expanded) psi(MPa) 2.5x104(172)maximum ASTMD2671
SpecicGravity 2.0maximum ASTMD2671
LowTemperatureFlexibility
4hoursat-70°C±2°C(-94±4°F)
Nocracking AMS-DTL-23053,
Paragraph4.6.7.1
HeatShock
4hoursat300±3°C(482±5°F)
Nodripping,owingor
cracking
RW-1200,Table2
ASTMD2671
HeatResistance
168hoursat250±3°C(437±5°F)
Followedbytestsfor:
TensileStrength
Ultimateelongation
psi(MPa)
Percent
1200(8.3)minimum
200minimum
AMS-DTL-23053,
Paragraph4.6.9
RW-1200,Section4.3.1
ASTMD2671
VacuumOutgassing
TML(TotalMassLoss)
VCM(VolatileCondensibleMaterial)
Percent
Percent
1.0maximum
0.1maximum
NASASP-R-0022A
ClarityStability
24hoursat200±3°C(392±5°F)
Markinglegiblethrough
tubingwall(Clearonly)
AMS-DTL-23053
ELECTRICAL
DielectricStrength Volts/mil(V/mm) 500(19,700)minimum ASTMD2671NOTE2
VolumeResistivity Ohm-cm 1X1013minimum ASTMD2671
CHEMICAL
CopperMirrorCorrosion
16hoursat175±2°C(347±4°F)
Non-corrosive ASTMD2671,
ProcedureA
Flammability

Selfextinguishing
within15seconds,
25%maximumagburn
ASTMD2671,
ProcedureC
FungusResistance Ratingof0 ASTMG21
WaterAbsorption
24hoursat23±3°C(73±5°F)
Percent 0.1maximum ASTMD2671
FluidResistance
24hoursat24±3°C(75±5°F)
JP-8Fuel(MIL-DTL-83133)
HydraulicFluid(MIL-PRF-5606)
LubricatingOil(MIL-PRF-23699)
LubricatingOil(MIL-PRF-7808)
SKYDROL500HydraulicFluid
SaltWater(5%NaCl,A-A-694)
De-icingFluid(AMS1424)
Water
Followedbytestsfor:
TensileStrength
UltimateElongation
psi(MPa)
Percent
1200(8.3)minimum
250
AMS-DTL-23053,
Paragraph4.6.11
ASTMD2671
PROPERTY REQUIREMENTS
HT-200TE Connectivity
While TE has made every reasonable effort to ensure the accuracy of the information in this flyer, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty
or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly
disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions
in this flyer are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.
te.com/products/HT-200
1-1773730-2 APP 5/2014
France: +33 (0) 1-3420-8686
Netherlands: +31 (0) 73-6246-999
China: +86 (0) 400-820-6015
© 2014 TE Connectivity Ltd. family of companies. All Rights Reserved.
TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or
company names might be trademarks of their respective owners.
USA: 1-800-522-6752
Canada: +1-905-475-6222
Mexico: +52 (0) 55-1106-0800
Latin/S. America: +54 (0) 11-4733-2200
Germany: +49 (0) 6251-133-1999
UK: +44 (0) 800-267666
NOTE1: Conditionthespecimensfor3minutesat200±3°C(392±5°F)andcooltoroomtemperaturebeforenalmeasurements.
NOTE2: Recoverthespecimenonthemetalmandrelsfor10minutes,minimum,at175±2°C(347±4°F)oruntilthetubingiscompletelyshrunkonthemandrels.