Cat1307191_Cover+Spine_v7.qxd 2/21/07 2:46 PM Page 1 Catalog 1307191 Revised 3-07 tycoelectronics.com 1307191-3M-LUG-FP-3-07 RF Coax Products Catalog Tyco Electronics Corporation Harrisburg, PA RF Coax Products RF Coax Connectors Introduction Product Facts Listed under the Component Program of Underwriters Laboratories Inc., File No. E-81956 as indicated by Product Family R Recognized under the Component Program of Underwriters Laboratories Inc., File No. E-81956 as indicated by Product Family R Certified by Canadian Standards Association File No. LR 7189 as indicated by Product Family R Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request ISO900e1d i rtif Ce Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in all Tyco Electronics products. They can provide you with: Technical Support Catalogs Technical Documents Product Samples Tyco Electronics Authorized Distributor Locations The Tyco Electronics RF Coaxial catalog combines the best products from industry leading brand names like M/A-COM and AMP. We have integrated these into one cohesive set of RF products focused specifically on wireless, wireline carrier, and enterprise networking sectors of the world telecom equipment market. Tyco Electronic's broadest selection of RF connectors and coaxial cable assemblies provides you with a solution for every interconnection requirement. Type N and 7/16 connectors are used where high power and rugged reliability are required, typically as antenna feeds, filter/ combiner I/O's, and power amplifier outputs. SMA, SMB, and TNC connectors are the primary cable interface for inner cabinet routing and are available in panel mount, board mount, and cable terminations. Subminiature connectors such as MCX, SMP, DIN, and BlindMate provide panel to board and backplane connections. Finally, our micro miniature SSMT, and MMCX series provide excellent board to board and card edge to board solutions. All of these interfaces are supported with cable terminating tools and between series adapters to meet all your requirements for trouble free terminations at the lowest applied cost. The appendices hold a wealth of information including a Theory and Application tutorial, RG/U cable specification tables, Application notes on White Bronze plating and intermodulation distortion. Whether you need rugged external RF power cables, panel mount, board to board, blindmate, or DIN, Tyco Electronics has the connection. Restriction on the use of Hazardous Substances (RoHS) At Tyco Electronics, we're ready to support your RoHS requirements. We've assessed more than 1.5 million end items/components for RoHS compliance, and issued new part numbers where any change was required to eliminate the restricted materials. Part numbers in this catalog are identified as: RoHS Compliant -- Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. NOTE: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly "Out of Scope" of the RoHS Directive such as hand tools and other non-electrical accessories. Non-RoHS Compliant -- These part numbers are identified with a "" symbol. These products do not comply with the material restrictions of the European Union Directive 2002/95/EC. NOTE: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to our website referenced at right. How to Use This Catalog Based on the communications gear that you are designing: Wireless Basestations Carrier Rack Equipment Chassis Set Top Box NIC Card Typical equipment drawings on pages 306-309 guide you to the interconnect section(s) in this catalog. Selection guides will direct you to products based on performance and mechanical requirements such as impedance, VSWR, max. frequency, power handling, etc. There are other guides to help you find the right connection: A table of contents listed by interface type, a complete connector type selector describes each interface with typical applications, and a miniselection guide shows key parameters to quickly pinpoint the right connector type. Getting the Information You Need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: Cross-Reference from Non-compliant to Compliant Products Ability to browse RoHS Compliant Products in our on-line catalog Downloadable Technical Data Customer Information Presentation More detailed information regarding the definitions used above So whatever your questions when it comes to RoHS, we've got the answers at www.tycoelectronics.com/leadfree RoHS Customer Support Center 2 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors RF Catalog Table of Contents Disclaimer While Tyco Electronics Corporation and its affiliates referenced herein ("Tyco Electronics") have made every reasonable effort to ensure the accuracy of the information in this catalog, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics' only obligations are those in the Tyco Electronics Standard Terms and Conditions of Sale, and in no case will Tyco Electronics be responsible for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products. Users should independently evaluate the suitability of, and test each product for, their application. The dimensions, specifications, designs, construction, materials and processes in this catalog are for reference purposes only and are subject to change without notice. Please consult Tyco Electronics for the most current product information. The export of certain Tyco Electronics products is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C., App. 2401 et seq.). Orders may be subject to export approval by the U.S. Government. Buyer must comply with all applicable export laws of all applicable jurisdictions. (c) Copyright 2007, 2000, 1998, 1994, 1992, 1990, and 1982 by Tyco Electronics Corporation. All International Rights Reserved. ACTION PIN, AMP, AMP-HDI, AMPLIMITE, AMP-O-LECTRIC, CERTI-CRIMP, COAXICON, M/A-COM, OSP, OSSP, PIDG, PRO-CRIMPER, RAYCHEM, SIEMAX, SMT/QuickGrip, SOLISTRAND, STAX, TE LOGO, TYCO ELECTRONICS and Z-PACK are trademarks. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. DANIELS is a trademark of Daniels Manufacturing Corporation. GPO is a trademark of Corning Gilbert, Inc. HIROSE is a trademark of Hirose Electric. MURATA is a trademark of Murata Electronics, Inc. ROLM is a trademark of the Rolm Corp. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc. TROMPETER is a trademark of Trompeter Electronics, Inc. VALOX is a trademark of General Electric Company. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. See inside back cover for Global Contacts and phone numbers. Miniature Connectors 7-16 Series Connectors .................................................................................................7-11 Lightning Protection Connectors .................................................................................12-19 Surge Protectors ......................................................................................................12-15 /4 Wave Stub Tuners ..............................................................................................16-19 N Series Connectors....................................................................................................20-25 Quick Lock N (QLN) Series Connectors .....................................................................26-28 TNC Connectors ..........................................................................................................29-43 BNC Connectors..........................................................................................................44-77 Mini BNC Connectors ..................................................................................................78-81 Decoupled Connectors................................................................................................82-87 Self-Terminating PC Board Connectors ............................................................................88 Twin BNC Connectors..................................................................................................89-92 F Series and G Series Connectors ..............................................................................93-99 Subminiature Connectors SMA Connectors......................................................................................................100-123 QMA Connectors .....................................................................................................124-128 DIN Connectors .......................................................................................................129-156 Series 1.0/2.3 .......................................................................................................129-137 Series 1.6/5.6 .......................................................................................................138-146 Measurement Accessories...................................................................................147-150 Coaxial Cables ............................................................................................................151 SMP Connectors ......................................................................................................152-156 Blind Mate Connectors ............................................................................................157-175 OSP Miniature Blind Mate Connectors ................................................................157-168 OSSP Subminiature Blind Mate Connectors........................................................169-175 SMB Connectors......................................................................................................176-192 SMC Connectors......................................................................................................193-195 MCX Connectors......................................................................................................196-203 Compression Coax Board-to-Board Connectors............................................................204 STAX Coax Connectors ..........................................................................................205, 206 Micro Miniature RF Coax Connectors SMT/QuickGrip Connectors.....................................................................................207-211 SSMT Connectors ....................................................................................................212-217 MMCX Connectors...................................................................................................218-221 UMCC Connectors...................................................................................................222-228 Switching Coax Connectors ....................................................................................229-236 Quick Snap Stripline (QSL) Connectors .........................................................................237 Multi Position Connectors DIN Inserts ...............................................................................................................238-241 Size 8 Contacts.......................................................................................................242, 243 COAXICON Contacts...............................................................................................244-248 SIEMAX Connectors ...............................................................................................249, 250 Between Series Adapters............................................................................................251-260 Coaxial Terminations .........................................................................................................261 Application Tooling .....................................................................................................262-268 Cable Assembly Capabilities ......................................................................................269-271 Appendix A - Theory and Application......................................................................................272-277 B - White Bronze Application Note..........................................................................278-280 C - Intermodulation Application Note ......................................................................281-283 D - Typical Coaxial Cable Specifications ................................................................284-298 E - Maximum Power Handling Capabilities for Cables ..................................................299 F - Nominal Loss Characteristics for Cables ..................................................................300 G - Glossary of Terms..............................................................................................301-305 RF Coaxial Solutions for Communications Equipment Overview ..............................306-309 RoHS Compliant to Non-RoHS Compliant Part Number Cross Reference ................310-312 M/A-COM Part Number Cross Reference...................................................................313, 314 Part Number Index ......................................................................................................315-318 3 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Connector Selection Connector Types 7-16 Series connectors are designed for medium to high power applications such as cellular base stations, control components, antenna and broadcast. The 7-16 Series minimizes intermodulation distortion by white bronze or silver plating the electrical path. Combined hex/knurl coupling nuts allow for manual or torque tightening, further reducing distortion by providing a strong butt joint. Lightning Protection devices have an integral surge arrestor capsule which is designed to protect equipment from high current pulses. It is effective against very fast rise times as induced by electromagnetic pulses from nuclear explosions (NEMP) and the slower pulses arising from lightning strikes (LEMP). N Series threaded connectors have an air dielectric interface and are low cost. These connectors operate to 11 GHz and are commonly used in cable-based local-area networks (LAN's) medium power transmitters, and base station antenna applications. TNC connectors have an interface similar to BNC except for a threaded coupling nut. The tighter fit provided by this screw-on connection improves interface control allowing connectors to operate up to 11 GHz. TNC connectors are excellent for mobile units where top-notch performance is required under vibration. BNC connectors offer easy engagement and disengagement using bayonet couplings and overlapping dielectrics. They are most useful for frequently coupled and uncoupled RF connections with frequencies below 4 GHz. BNC connectors find applications in flexible networks, instrumentation, and computer peripheral interconnections. F & G Series connectors offer enhanced performance beyond 1 GHz. Designed to meet the rigorous requirements of Bellcore TA-NWT-001503 and SCTE specifications, the F & G series provides high current carrying capabilities in both sealed and un-sealed configurations. Plugs, jacks and adapters are available in threaded and push-on versions. These connectors meet the evolving needs of the communications industry for increased reliability and performance. SMA threaded connectors are widely used in microwave communications. Connectors operate to at least 12.4 GHz on flexible coax cables, and up to 26.5 GHz on semi-rigid coax cables. Crimp-on SMA connectors that operate to 26.5 GHz are available. Blind Mate connectors operate to 22 GHz for OSP connectors, 28 GHz for OSSP connectors, and 40 GHz for SMP style connectors. These connectors offer easy slide-on connection and require less alignment between the cable and the equipment than other connectors with comparable band width. Blind Mate connectors are widely used as coaxial interconnects between plug-in modules and motherboards when axial and radial misalignments are necessary. SMB connectors feature a snap coupling for fast connection. A self centering outer spring and overlapping dielectric allows easy snap-on and excellent performance even in moderate vibration. The SMB is smaller in size than the SMA and excellent where engineers are concerned about circuit miniaturization. Typical application is inter- or intra-board connection of RF or digital signals. Commercial 50 ohm versions operate to 4 GHz, and 75 ohm versions reach 2 GHz. MCX connectors offer a high reliability, space saving sub-miniature coaxial cable to cable and cable to board interconnection system. The MCX connectors impedance types are applicable up to 6 GHz. Surface Mount (SMT) connectors. The RF solution to the communication and information age. Tyco Electronics' SSMT and SMT Quick Grip connectors are designed to meet the growing demand for surface mount RF connector technology. These connectors operate up to 6 GHz utilizing cable assembly design to terminate to SMT connectors. Surface mount connectors contribute to high density packaging and high volume manufacturing requirements. Multi Position connectors. These connector series, including the 1.0/2.3 (CECC 22230), 1.6/5.6 (CECC 22240), Subminiature D (DIN 41652 and CECC 75 301-082), and Tyco Electronics' own SIEMAX multi coax connector series offer the customer a broad choice of options where density and performance are a major concern. The 1.0/2.3 series contacts are available in both 50 and 75 Ohm versions and are designed for use to 10 GHz. The different types of coupling mechanisms, such as screw on, slide-in and latching coupling provide for a variety of space-saving installations. The connector series 1.6/5.6 has been modified to incorporate improved technical advantages. A 75 Ohm design for use up to 8 GHz, it offers excellent screening effectiveness and is a most suitable component for those applications where the transmission of high bit rates is required. In Subminiature D type connectors these interfaces provide good electrical grounding and electromagnetic shielding in a small package size. These plug connectors address the increasing demands related to EMC (electromagnetic compatibility) and RFI (immunity to radiated noise), and are widely used as interface connectors in office and data systems, telecommunications equipment, and in measurement and control systems. Tyco Electronics' SIEMAX connectors combine the benefits of surface mount technology and modular design. This 75 Ohm connector series operates up to 2 GHz and offers a compact grid pitch of 10mm. Its uses include multiplex and high-density systems, and Base Station applications. Miscellaneous connector types include multiple-circuit connectors that use coaxial contacts in a pin-and-socket configuration, crimp-on ferrules that offer fast, reliable connections for attaching one or more ground taps to shielded wire and braided shield terminations for connecting cable shields to pc boards. Also available are network/premises interconnect products for Ethernet/IEEE 802.3 systems and coaxial taps for simple, dependable connections from transceiver to LAN without cutting the cable. 4 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Connector Selection Guide Product 7-16 Series Lightning Protection N Series Commercial TNC Single Crimp TNC Dual Crimp TNC Commercial TNC 75 Ohm BNC Single Crimp BNC Dual Crimp BNC Dual Crimp Commercial BNC Hex Crimp BNC Field Serviceable BNC 75 Ohm Nominal Impedance Ohms 50 50 Maximum Frequency GHz 7 2.5 Temperature Rating C -55 to +155 -45 to +85 50 11 -65 to +85 50 7 -65 to +165 50 11 -65 to +165 50 7 -55 to +85 75 2 -55 to +85 50 2.5 -65 to +165 50 4 -65 to +165 50 4 -55 to +85 50 4 -55 to +85 50 4 -65 to +165 50 4 -40 to +125 10 -40 to +85 -- 75 2 -40 to +85 -- -- 50 2.4 -- N/A -- 2 -65 to +85 -- -55 to +85 F Series 75 -- -55 to +85 G Series 75 -- -55 to +85 SMA Semi-Rigid SMA Flexible 50 26.5 -65 to +105 50 12.4 -65 to +165 SMP 50 40 -65 to +165 OSP Semi-Rigid OSP Flexible OSSP Semi-Rigid OSSP Flexible 50 22 -65 to +125 50 12.4 -65 to +125 50 28 -65 to +125 50 -- -65 to +125 SMB 50 4 -65 to +85 SMC 50 10 -65 to +85 50 6 -65 to +165 75 6 -65 to +165 SMT Quick Grip SSMT 50 50 3 6 -40 to +125 -40 to +125 MMCX 50 6 -55 to +155 Mini BNC 75 2 -40 to +85 QMA 50 6 -40 to +125 Comp. Coax [N] 50 75 MCX Connectors lb -- DIN 1.0/2.3 Switching Coax Durability Cycles Threaded Threaded Maximum Peak Voltage 4000 650 Page No. 500 500 Connector Body Finish White Bronze White Bronze Threaded 1000 500 Nickel 20 Threaded 500 500 Silver 29 Threaded 500 500 Silver or Nickel 29 Threaded 500 500 Nickel 29 Threaded 500 500 Nickel 29 Bayonet 500 500 Silver or Nickel 44 Bayonet 500 500 Silver or Nickel 44 Bayonet 500 500 Nickel 44 Bayonet 500 500 Nickel 44 Bayonet 500 500 Nickel 44 Bayonet 500 500 Nickel 44 Bayonet 500 200 Silver or Nickel 89 Threaded (F) 500 200 Nickel 93 Push-On (G) 500 200 Nickel 93 Threaded 500 500 100 Threaded 500 500 Gold or Passivated Stainless Steel Gold or Passivated Stainless Steel Snap-On 500 100 Gold 152 Gold or Passivated Stainless Steel Gold or Passivated Stainless Steel Gold or Passivated Stainless Steel Gold or Passivated Stainless Steel 157 Coupling Mechanism RG8A/U -- Adapter -- 90 400.3 (RG-214/U) 60 266.9 (RG-58C/U) 60 266.9 (RG-58C/U) 60 266.9 (RG-58C/U) 60 266.9 (RG-59B/U) 60 266.9 (RG-58C/U) 60 266.9 (RG-58C/U) 60 266.9 (RG-58C/U) 60 266.9 (RG-58C/U) 40 177.9 (RG-142B/U) 60 266.9 (RG-59B/U) 25 111.2 (RG-108/U) 40 (Series 59, 6, 7 -- Single Braid) 40 (Series 59, 6, 7 -- Single Braid) 60 266.9 (RG-402/U) 40 177.9 (RG-58C/U) 20 89 (RG-405/U) 60 267.02 (RG-402/U) 40 178 (RG-58/U) 20 89 (RG-405/U) 20 89 (RG-316/U) 20 89 (RG-316/U) 20 89 (RG-174/U) 20 32 (RG-316/U) 20 32 (RG-187/U) Omni-Flex -- Omni-Flex -- 10 44.5 (RG-178/U) 20 -- (735A) 20 -- (RG-316/U) N/A -- Nonconstant Twin BNC Cable Retention 7 12 100 Push-On 500 5000 Push-On 335 5000 Push-On 335 5000 Push-On 250 5000 Snap-On 335 500 Nickel 176 Threaded 250 500 Gold 193 Snap-On 500 500 Nickel 196 157 169 169 Snap-On 500 500 Nickel 196 Snap-On Snap-On 250 250 5 100 Gold Gold 207 212 Snap-On 500 500 Gold 218 Bayonet 300 500 Nickel 78 Quick Lock 335 100 Nickel 124 N/A Thread/ Snap/Slide Thread/ Snap/Slide N/A 125 25 Gold 204 500 500 -- 129 500 500 -- 129 -- 30,000 -- 229 5 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Connector Selection (Continued) Method of Termination Tyco Electronics provides connectors that can be terminated to coaxial cable, printed circuit boards or other connector interfaces. Selection of the proper connector to terminate to an RG cable is simplified by using the format of this catalog. Experience has proven that certain connector types lend themselves to termination of particular coax cable sizes. For example, miniature cables such as RG 188 are most practically terminated to subminiature connectors such as SMB and SMC styles. Figure 3 illustrates the interface diameters of each connector type and the dielectric outside diameter (DOD) of popular RG cables. It is most economical to select a connector that terminates to a cable with a dielectric diameter close in size to the connector's interface diameter. The product information sections of this catalog have been organized so that all connector construction types are grouped together by cable size. This allows easy selection of the connector construction best suited for the application. Tyco Electronics continually looks at new cable types and will release new part numbers based upon general market or specific customer needs. If you cannot find a Tyco Electronics part number for a specific cable type, please contact one of our sales locations or your local distributor to make an inquiry. Tyco Electronics offers a wide range of connector configurations for terminating to printed circuit boards. Also available are connectors which allow the interconnection of one interface type to another. RG-8 RG-6 N RG-59/62 RG-58/142 BNC/TNC SMA RG-180 SMB/C RG-188 RG-178 0 0.1 0.2 0.3 Diameter (Inches) 0.4 Connector Cable Type Figure 3 0.5 By reviewing this catalog, a connector can be found to match most any application. Since the RF connector is a part of a transmission line system, make sure when selecting a new connector design, that it is compatible with the overall system's performance. Construction The construction of a connector will greatly affect the purchase price. The connector tables in this catalog include construction details that allow you to select connectors that meet your requirements at the lowest price. Commercial designs use lower cost materials, such as zinc diecast bodies, polypropylene insulators and silver-plated contacts. Specific details of connector construction are listed in each product section of this catalog. The materials used affect both performance and cost. Common base metals include brass, beryllium copper and stainless steel. The most common plating used for the center contact is gold because of its low contact resistance, superior mating properties and corrosion resistance. TEFLON, polypropylene and polymethylpentene (TPX) are the most common connector dielectrics. TEFLON offers the lowest loss, the most stable electrical properties and highest operating temperature. But since it cannot be injection molded, manufacturing is more costly than other materials. Be certain, when specifying connectors, that the temperature and voltage limitations are taken into consideration. Assembly There are several methods of assembly or termination, but they can be categorized into two major areas: (1) Solder center conductor and clamp braid (Category A) and (2) Crimp center conductor and crimp braid. Other methods are derived from combinations of the above, (e.g., solder center conductor and crimp braid. Method (1) (Category A) is generally used where no specialized tools are available, such as with field installations. With the development of low cost assembly tools, method (2) is becoming more popular for field installation. Crimping is preferred in most manufacturing environments where assembly tooling is available because terminations can be made in the least amount of time and with the greatest reliability. The design of crimp tools assures that every termination is made the same; this cannot be done with a clamp design without further testing or inspection. Figure 4 illustrates the difference between braid crimping using AMP "O" crimp and the industry-standard hex crimp. The AMP "O" crimp gives a more consistent pressure on the outer collar. In addition, the crimp of the center conductor provides superior VSWR as shown in Figure 5. Benefits derived by using AMP "O" crimp: No soldering of center contact is required. This alleviates all prospective problems associated with the soldering process such as excess solder, cold solder joints and overheating the dielectric. Fewer parts resulting in less assembly errors Braid crimping which eliminates the need for the combing, screwing and torquing associated with the braid clamp. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc. 6 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors 7-16 Series Connectors Product Facts Designed for cellular basestations, control component, antenna and broadcast applications Available in White Bronze plating Minimizes Intermodulation Distortion by the use of non-ferrous materials Hex knurl for wrench tightening Available for several popular RG cable sizes in solder-clamp and crimpcrimp attachment styles Tyco Electronics offers a comprehensive range of 7-16 Connectors to suit today's challenging Wireless Infrastructure Market. This market demands reliable, intermodulation sensitive connectors that accommodate higher power. Related Product Data N Connectors -- Pages 20-25 Application Notes -- White Bronze -- Appendix B Intermodulation -- Appendix C Between Series Adapters For 7-16 Series Between Series Adapters, see pages 251-260. Tyco Electronics 7-16 Coaxial Connector Series provides reliable, intermodulation- minimizing solutions that also provide a logical alternative to N Series connectors in high power applications where a more rugged interface design is required. Typical examples of this include transmitter to antenna links and channel switching networks. The 7-16 Series conforms to CECC 22190 and IEC 169-4 specification standards and has a 2.7kV working voltage at the connector interface and maximum power handling capability of 4kW. The series has been designed for these demanding environments and can withstand a minimum of 500 mating cycles. Popular RG cable sizes are covered in both solder/clamp and crimp attachment styles. Two piece combination connectors adapt to straight or right-angle configurations, minimizing the number of different part codes needed by the customer. Series N to 7-16 between series adapters facilitate the transition between system interfaces as well as providing a test interface. The increased customer demand for greater channel capacity combined with increased sensitivity of receivers has exposed the IMD (Intermodulation Distortion) phenomenon. To address this problem 7-16 Connectors have been designed to reduce IMD through the use of nonferrous base materials and by silver plating of the electrical path. The proprietary White Bronze plating technique is standard, providing high corrosion resistance, low porosity, scratch resistance, low RF loss and a non-magnetic finish. Incorporation of hex-knurl coupling nuts allow for hand or wrench tightening of connectors, depending upon the application. Tyco Electronics is a global ISO 9001 certified manufacturer and maintains a complete in-house Intermodulation Testing facility. Connector part numbers shown form just a small part of the extensive interconnect package that Tyco Electronics offers for the professional wireless and telecom markets. 7 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors 7-16 Series Connectors (Continued) General Specifications Materials Female Contacts (inner and outer) Other Metal Parts Insulators Gaskets Finishes Parts in the electrical path Other Metal Parts Beryllium Copper Brass Fluorocarbon Polymer Silicone Rubber Silver over copper White Bronze Electrical Frequency Range Impedance Insulation Resistance Maximum Working Voltage rms (sea level) Maximum Proof Voltage rms (sea level) Center Contact Resistance Insertion Loss VSWR Intermodulation DC-7GHz 50 Ohms 10,000 Megohms Minimum 2.7kV (connector) 1.4kV (versions for RG 213, 214 and 393) 2.7kV (connector) 1.4kV (versions for RG 213, 214 and 393) 0.8 milliohm (max.) after conditioning <1.5dB to 5 GHz 1.02 + 0.03f up to 7 GHz where f is measured in GHz Better than -150dBc Mechanical Coupling Torque Proof Torque Mechanical Endurance 18.5 - 22 ft.-lbs. 25 ft.-lbs. 500 mating cycles Environmental Temperature Rating -55C to +155C 8 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors 7-16 Series Connectors (Continued) Straight Cable Plug Solder/Solder O 32.00 0.20 [1.260 .008] O 16.50 0.20 [.650 .008] 4.50 Typ. [.177] Cable Type 1/2" Corrugated Body Plating White Bronze/ Gold 1460159-1 Cable Type RG 8A/U, RG 213/U RG 9B/U, RG 214/U Body Plating White Bronze White Bronze Part No. 6331959-1 6362765-1 Cable Type RG 58C/U, RG 141A/U RG 213/U RG 214/U Body Plating White Bronze White Bronze White Bronze Part No. 6408028-1 6408030-1 6312113-1 23.50 Typ. [.925] Part No. 50.35 0.50 [1.982 .020] Straight Cable Plug Crimp/Crimp 43.5 [1.71] 32.0 Dia. [1.26] Right-Angle Cable Plug Solder/Crimp 43.0 [1.69] 36.0 [1.42] Assembled 32.0 Dia. [1.26] 34.3 [1.35] 36.0 [1.42] 43.0 [1.69] 32.0 [1.26] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 9 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors 7-16 Series Connectors (Continued) Right-Angle Cable Plug Solder/Clamp 43.0 [1.69] 32.0 [1.26] Cable Type RG 55B/U, RG 58C/U, RG 141A/U, RG 142B/U, RG 223/U, RG 400/U T-Flex 402 Body Plating Part No. White Bronze 6408026-1 Silver 6328873-1 Cable Type RG 213/U, RG 214/U, RG 393/U RG 8A/U, RG 9B/U, RG 213/U, RG 214/U Body Plating Part No. White Bronze 6408027-1 White Bronze 6408038-1 Cable Type RG 8A/U, RG 213/U RG 9B/U, RG 214/U Body Plating White Bronze White Bronze Part No. 6408032-1 6408033-1 23.2 [0.91] 43.0 [1.69] 32.0 Dia. [1.26] 47.2 [1.86] Straight Panel Mount Cable Jacks Crimp/Crimp 46.5 Assembled [1.83] Mounting Detail 44.0 [1.73] 17.2 [0.68] 5.00 [0.20] 24.8 [0.98] 24.8 [0.98] 3.70 Dia [0.15] 4 Holes. 29.5 Dia. [1.16] Panel Socket Launcher Mounting Detail 21.6 [0.85] 24.8 [0.98] Body Plating White Bronze White Bronze Part No. 6311225-1 1460052-2 24.8 [0.98] 5.00 [0.20] 3.70 Dia [0.15] 4 Holes. 29.5 Dia. [1.16] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 10 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors 7-16 Series Connectors (Continued) Right-Angle Panel Jack Solder/Clamp 46.3 [1.82] 17.2 [0.68] Mounting Detail 5.00 [0.20] 24.8 [0.98] 24.8 [0.98] Cable Type RG 213/U, RG 214/U, RG 393 RG 58C/U, RG 142B/U, RG 223/U, RG 400/U Body Plating Part No. White Bronze 6408036-1 White Bronze 6363527-1 Body Plating Part No. White Bronze 6363524-1 White Bronze White Bronze 6363525-1 6363526-1 47.2 [1.86] 3.70 Dia [0.15] 4 Holes. 29.5 Dia. [1.16] Combination Panel Jack Solder/Crimp 46.3 [1.82] 17.2 [0.68] Mounting Detail 24.8 [0.98] 5.00 [0.20] 34.2 [1.35] 24.8 [0.98] 36.7 [1.44] Assembled 3.70 Dia [0.15] 4 Holes. Cable Type RG 55B/U, RG 142B/U, RG 233/U, RG 400/U RG 8A/U, RG 213/U RG 9B/U, RG 214/U 29.5 Dia. [1.16] Bulkhead Adapter Jack/Jack 49.0 [1.93] 33.0 [1.30] 14.0 Max [0.55] Panel Body Plating White Bronze 45.0 [1.77] Part No. 6408037-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 11 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Lightning and EMP Protection Devices Product Facts Cellular operator protection against EMP (electromagnetic pulses) caused by lightning strikes Two different categories: Surge protectors and Quarter wave stub tuners For use in cellular infrastructure including GSM, DCS 1800, and PCS 1900 systems Incorporates Gas Discharge Tube (GDT) technology Tyco Electronics has developed a unique series of Lightning and EMP protection devices for use in cellular infrastructure including GSM, DCS 1800, and PCS 1900 systems. These devices are designed to offer the cellular operator protection against EMP (electro-magnetic pulses) caused by lightning strikes. Direct or even near strikes produce fast rising electric fields within micro-seconds. These fields generate high voltage pulses through unprotected antennas and transmission lines which lead to the primary communication equipment. High voltage pulses can cause extensive damage leading to costly repairs as well as significant loss of service to Selecting your RF Coaxial Lightning Protection Device Between Series Adapters For 7-16 Series and N Series Between Series Adapters, please see pages 251-260. subscribers. These protective devices come in two different categories: surge protectors and quarter wave stub tuners. To ensure that proper, low level contact resistance is established between the LP device and mounting wall, it is recommended that a minimum torque of 50 in/lbs / 5.65 n/m be applied to tighten the connector mounting nut. A recommended minimum torque of 35 in/lbs / 3.95 n/m should also be applied for installation of replacement surge protector capsules to ensure proper protection performance. In order to ensure that resultant currents from lightning or EMP strikes do not Number of Thunderstorm Days per year 05 10 15 20 30 40 50 70 90 130 150 180 interfere with parallel transmission lines within protected electronic equipment, surge protector devices must be installed with proper orientation. The surge protector side of the device should be mounted in the unprotected side of the equipment while the mounting nut is positioned internally in the protected area. It is important when planning lightning protection, that the user can estimate the potential number of direct strikes. This information may influence the type of device selected or the requirement for routine maintenance checks. Significant attention must be paid to the height of sup- hmax/m 10% 28 18 14 12 9.4 7.9 6.9 5.6 4.8 3.9 3.5 3.1 porting structure as this, when related to the typical number of thunderstorms in a particular region, allows us to estimate the probability of a direct strike taking place. To assist our customers in this, the following table and chart has been included in this note. This should enable lightning protection planners to establish the likelihood of direct strikes across a network anywhere in the world. Detailed application notes are available for proper selection of lightning protection devices (surge protectors & stub tuners) as well as intermodulation and White Bronze plating. hmax/m 20% 39 26 20 17 13 11 9.5 8.0 7.0 5.5 5.0 4.4 hmax/m 50% 61 40 31 26 20 17 15 12 10.6 8.5 7.7 6.9 Table 1: Maximum height of supporting building for a given number of thunderstorm days (when hmax is exceeded, probability of direct strike to supporting building within 15 years is greater than 10% for hmax values given in second column, 20% for hmax values given in third column and 50% for hmax values given in the fourth column). 12 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Surge Protectors Product Facts Excellent for Broadband Frequency Applications Field Replaceable Gas Discharge Tube Available Interfaces Facilitate Retrofit Capabilities Low VSWR up to 2.5GHz Specialized White Bronze Finish Selection of a Lightning Protection Device At right are the basic advantages and limitations for both types of protection to use in the proper selection for your application. Advantages Broadband Allows DC bias on the transmission line. (critical for applications using mast top electronics.) No harmonic passband Ease of retrofitting antenna sights GDT easily accessible for replacement Limitations Routine maintenance recommended 3 GHZ maximum frequency Initial pass-through voltage These devices incorporate Gas Discharge Tube (GDT) technology. A GDT is a hermetically sealed tube containing an inert gas. The tube is inserted in the side of the device through an easily accessible weather sealed port. During normal operation the tube is inactive. When an installation is struck by lightning, a high voltage impulse will appear on the coaxial line. As the impulse amplitude rises, a level is reached where the impulse surpasses the dynamic voltage threshold of the tube and the electrodes arc over to discharge the energy to ground. Prior to activation of the tube, there will be a short period of time where energy will be present on the line. This residual pulse is equal to the dynamic voltage threshold of the tube. The maximum impulse voltage a tube can handle without discharging is referred to as the impulse sparkover voltage. This capacity of the GDT is quoted as follows: Characteristic Impulse sparkover voltage Symbol Definition Impulse Typical Value Dynamic voltage threshold 1kV/S 650V Uzdyn In the case of the referenced chart, the voltage will rise at one kilovolt per microsecond and the tube will fire after 650 nanoseconds. During activation a small percentage of voltage (called arc voltage) will still pass through. This will be approximately 30 volts. When the pulse subsides, the tube again becomes inactive leaving a small residual voltage on the line. A direct lightning strike results in an impulse current of high amplitude. The capability of a device to protect a system is defined as the impulse discharge current rating. This is defined as the peak current of an impulse which the device can withstand ten times (5 at each polarity at fixed intervals) without affecting the device. maximum impulse discharge current is the peak current of an impulse the device can withstand once. Surge protectors are often used in applications requiring a standing DC line voltage. This is typical in applications with mast top electronics. The maximum voltage capacity of a surge protector prior to it surpassing the static voltage threshold and discharging it to ground is defined as its D.C. 13 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Surge Protectors (Continued) destruct. GDT's have a finite life span which is inversely proportional to the energy dissipated. At extremes it is possible to reach a level where the tube is unable to discharge all the energy and is destroyed. It is therefore necessary to schedule routine maintenance checks and periodically replace the tube within the surge protector. sparkover voltage. This capacity is quoted as follows: Characteristic d.c. sparkover voltage Symbol Definition Uzstat Static voltage threshold Impulse Typical Value n/a 230V In these applications it is important to select a device that will assure the tube can return to its inactive state after the passage of a surge. This feature of the Surge protector is known as the holdover voltage. If the device continues to conduct, the protected line will be short circuited and the tube will heat up (glow mode). If left in this state, the tube can overheat and Specifications Surge protectors offer excellent lightning protection for broadband systems and are usable up to 3 GHz. Standard interfaces include 7-16, N, and SMA. Configurations include straight and bulkhead mounted adapters which allows for ease of assimilation into existing systems. Requirement Electrical Frequency Range Impedance VSWR Performance Insertion Loss (Typical) Impulse Discharge Current (8/20s, multiple strike) Maximum Impulse Discharge Current (8/20s, single strike) Dynamic Sparkover Voltage, NEMP (1kV/s) Dynamic Sparkover Voltage, LEMP (1kV/s) Dynamic Sparkover Voltage, Static (<100V/s) Materials Body Parts Gaskets Female Contacts Male Contacts Insulators Environmental Operating Temperature Range Relative Humidity Detail DC to 3GHz 50 1.33:1 0.45dB 20kA 50kA 2,000V 800V 90V* Brass Silicone Rubber Beryllium Copper Brass P.T.F.E. -45 C to +85 C up to 100% * Determined by gas tube used, can be higher than value shown. N Series Jack to SMA Bulkhead Jack Adapter 53.8 Ref. [2.12] 21.5 [0.85] Ref. 25.4 [1.00] Sq. 13.6 [0.54] 14.0 [0.55] 16.0 [0.63] Dia. Recommended Mounting Hole Part Number 6312079-1 Frequency Range Contact Plating Body Plating Max Panel Compliant With DC to 3GHz Gold White Bronze 10.00mm CECC22210/ CEC22110 Coupling Torque 0.7-1.1Nm Proof Torque 1.7Nm both ends Endurance 500 Matings Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 14 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Surge Protectors (Continued) N Series Jack to N Series Bulkhead Jack Adapter 25.4 [1.00] Sq. 53.8 Ref. [2.12] 16.0 [.063] Dia. 13.6 [.054] Recommended Mounting Hole Frequency Range Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance DC to 3.0 GHz Gold White Bronze 10.00mm CECC22210 0.7-1.1 Nm 1.7 Nm 500 Matings Frequency Range Contact Plating Body Plating Compliant With Coupling Torque Proof Torque Endurance DC to 3.0 GHz Silver White Bronze CECC22190 25 - 30 Nm 35Nm 500 Matings Part Number 6312138-1 7-16 Plug to 7-16 Jack Adapter 56.5 [2.23] Ref. 31.9 [1.25] 34.0 [1.34] Dia. Ref. Part Number 6312121-1 Gas Discharge Tube Replacement Part Number 1402314-1 d.c. Sparkover Voltage: Impulse Sparkover Voltage: (1kV/mS) 230V 46V 700V typ. (900V max) Glow Discharge Voltage: Arc Discharge Voltage: a.c. Discharge Current: (1 sec, 50Hz) Impulse Discharge Current: (8/20mS waveform) 72V 10V 20A 20kA (50kA for one strike) Insulation Resistance (@100V): 10GW Capacitance: 2pF Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 15 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors /4 Stub Tuners Product Facts Ideal for use with GSM, PCS and DCS Maintenance Free Operation Low VSWR Within Specified Bandwidth Configurations include direct attachments to Cable variants Optional White Bronze Finish Advantages Low VSWR in passband Minimal maintenance Pass-through voltage eliminated No sparkover or residual voltage concerns Ease of retro-fitting antenna sights Limitations Frequency specific Harmonic passband Does not allow DC bias on transmission line These devices are three port coaxial connectors. The third port extending from the main through path is terminated in a short circuit at a pre-determined distance calculated to be exactly one quarter wavelength at the desired center frequency (see graph). Unlike surge protectors, this design eliminates concerns about residual pulse, sparkover voltage and residual voltage ensuring greater protection for sensitive electronic equipment. As opposed to surge protectors, stub tuners will absorb lightning strikes without need for replacing components. These devices yield very low VSWR and feature high attenuation within a relatively narrow pass-band (+/- 70 MHz) but are application specific. Stub tuners also pass energy in bands that are harmonically related to the fundamental center frequency. The graphs below show a typical test impulse and the response of a stub tuner. Stub tuners are classified into two broad categories-- simple and broadband. The simple stub tuner exhibits a V-shaped response on the VSWR vs. frequency plot. The trough of the V is designed to occur at the required Fo and the bandwidth is restricted to approximately 8%. The broadband tuner employs extra RF techniques, similar to multiple cavity filtering, which increase the effective bandwidth by approximately 20%. Tyco Electronics offers a wide variety of stub tuners for the most popular frequency bands to facilitate purchase without need for custom design and manufacturing. Designs exist for GSM, PCS 1900, DCS 1800 frequencies with standard industry interfaces including SMA, 7-16, and Type N. Configurations include cable assemblies, cabled connectors, and adapters for ease of assimilation into existing systems. Stub tuners are maintenance free since they incorporate no active components though it is recommended that a check of the stub tuner affixment be made following heavy discharges at an installation. Typical Test Impulse V 1.0 1.9 0.5 0.3 0 01 t T T1 T1 = 1.67T T2 Typical /4 Test Response 326.400 110.308 V kA 244.800 94.5588 V kA 163.200 78.8088 V kA 81.6000 63.0588 V kA -640.0nS, 80.033280 V 10.98uS, 49.45920kA /4 Shorting Stub Basics li Vi Vr lr 0.0 uV 47.3088 kA -81.600 31.5588 V kA -163.20 V 15.8088 kA -244.80 V 58.80 A -326.40 V -15.691 kA 0.0nS 0.0nS 20.00uS 20.00uS 40.00uS 40.00uS 60.00uS 60.00uS 80.00uS 80.00uS 16 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors /4 Stub Tuners (Continued) Requirement Electrical Impedance VSWR Performance in Band Insertion Loss (Typical) DC Resistance (stub outer to inner) Dynamic Voltage @ 250A/ms Residual Voltage @ 2500A, 8/20s Outer Conductor Contact Resistance DC Resistance (through-path center contact) Materials Body parts Gasket Female contacts Male Contacts Insulators Environmental Operating temperature range Relative humidity (non-condensing) DCS 1800 Type N Clamp Bulkhead Jack 62.9 Ref. [2.48] 23.5 [0.92] Ref. Detail (Type-N, 7-16) 50 1.2:1 0.2dB 1m 15V 15V 10m 100m Brass Silicone Rubber Beryllium Copper Brass P.T.F.E. -45C to +85C up to 100% 25.4 [1.00] Sq. 13.6 [0.54] 54.7 42.0 [2.15] [1.65] Ref. Ref. Cable T-Flex402 7-16 Jack to 7-16 Bulkhead Jack Adapter 16.0 Dia. [0.63] Recommended Mounting Hole Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 70 MHz 1795 MHz Silver Silver 10.00mm CECC22210 0.7-1.1Nm 1.7Nm 500 Matings Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 70 MHz 1795 MHz Silver White Bronze 8.00mm CECC22190 25 - 30Nm 35Nm 500 Matings Part No. 6329818-1 77.6 Ref. [3.06] 44.9 Dia. [1.77] Ref. 30.5 [1.20] 17.5 [0.69] 67.0 [2.64] 44.6 Ref. [1.76] Ref. 3.20 [0.13] Recommended Mounting Hole Part Number 6361137-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 17 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors /4 Stub Tuners (Continued) DCS 1800 (Continued) Type N Crimp Bulkhead Jack 62.9 Ref. [2.48] 25.4 [1.00] Sq. 23.5 [0.92] Ref. 13.6 [0.54] 42.0 [1.65] Ref. Cable RG58C/U Type N Jack to Type N Bulkhead Jack Adapter 57.3 Ref. [2.26] 54.7 [2.15] Ref. 16.0 Dia. [0.63] Recommended Mounting Hole Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 70 MHz 1795 MHz Silver Silver 10.00mm CECC22210 0.7-1.1Nm 1.7Nm 500 Matings Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 70 MHz 1795 MHz Silver Silver 10.00mm CECC22210 0.7-1.1Nm 1.7Nm 500 Matings Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 70 MHz 925 MHz Silver White Bronze 8.00mm CECC22190 25 - 30Nm 35Nm 500 Matings Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 70 MHz 1920 MHz Silver Silver 10.00mm CECC22210 0.7-1.1Nm 1.7Nm 500 Matings Part No. 1329819-1 23.5 [0.93] Ref. 25.4 [1.00] Sq. 13.6 [0.54] 10.0 [0.39] 54.7 42.0 [2.15] [1.65] Ref. Ref. 16.0 Dia. [0.63] Recommended Mounting Hole Part Number 1361138-1 GSM 7-16 Bulkhead Jack to 7-16 Bulkhead Jack 77.6 Ref. [3.06] 27.4 [10.8] Ref. 44.9 Dia. [1.77] Ref. 30.5 Dia. [1.20] 93.4 [3.68] 71.0 Ref. [2.79] Ref. 17.5 [0.69] Recommended Mounting Hole Cable T-Flex 402 Cable PCS 1900 Type N Clamp Bulkhead Jack Part No. 6408399-1 62.9 Ref. [2.48] 23.5 [0.92] Ref. 25.4 [1.00] Sq. 13.6 [0.54] 52.9 40.2 [2.08] [1.58] Ref. Ref. Cable T-Flex 402 16.0 Dia. [0.63] Recommended Mounting Hole Part No. 1312137-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 18 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors /4 Stub Tuners (Continued) PCS 1900 (Continued) Type N Crimp Bulkhead Jack 62.9 Ref. [2.48] 25.4 [1.00] Sq. 23.5 [0.92] 13.6 [0.54] 52.9 40.2 [2.08] [1.58] Ref. Ref. Cable RG58 C/U 7-16 Clamp Bulkhead Jack 27.4 [1.08] Ref. 16.0 Dia. [0.63] Recommended Mounting Hole 72.7 Ref. [2.86] 24.6 [0.97] Ref. 27.5 [1.08] 4.00 Ref. [0.16] 29.5 Dia. [1.16] 40.2 Ref. [1.58] Recommended Mounting Hole 7-16 Bulkhead Jack to 7-16 Bulkhead Jack Adapter 70 MHz 1920 MHz Silver Silver 10.00mm CECC22210 0.7-1.1Nm 1.7Nm 500 Matings Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 1920 MHz 70 MHz Silver Silver 8.00mm CECC 22190 25-30 Nm 35 Nm 500 Matings Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 1920 MHz 70 MHz Silver White Bronze 8.00mm CECC 22190 25-30 Nm 35 Nm 500 Matings Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance 70 MHz 1920 MHz Silver Silver 10.00mm CECC22210 0.7-1.1Nm 1.7Nm 500 Matings Part No. 6312139-1 38.0 Dia. [1.50] Ref. Cable T-Flex402 Bandwidth Center Frequency Contact Plating Body Plating Max Panel Compliant With Coupling Torque Proof Torque Endurance Part No. 6312123-1 44.9 Dia. [1.77] Ref. 77.6 Ref. [3.06] 30.5 [1.20] 17.5 [0.69] 64.6 [2.54] Ref. 42.2 [1.66] Ref. Recommended Mounting Hole Part Number 6312124-1 Type N Bulkhead Jack to Type N Bulkhead Jack Adapter 25.4 [1.00] Sq. 57.3 Ref. [2.26] 16.0 [0.63] Dia. 52.7 [2.08] Ref. 40.0 [1.58] Ref. 13.6 [0.54] Recommended Mounting Hole Part Number 6361139-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 19 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors N Series Connectors Product Facts Designated connectors are MIL-C-39012, Class II, Category B qualified Captive center contacts Completely crimpable application - one hand tool crimps all cables with single or double braided shields of a given size Impedance matching crimps Broad band performance - low VSWR Superior cable retention TEFLON dielectric Silver or nickel finish Fully intermateable with MIL-C-39012 connectors Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 Recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 R R Certified by Canadian Standards Association File No. LR 7189 R The Tyco Electronics N Connector, featuring a 15.88 [5/8] - 24 threaded coupling for optimum stability, is highly suited for critical applications and environments. This medium sized connector can withstand shock and vibration to assure a low noise level and has a constant impedance of 50 ohms. It also features a captive center contact and provides excellent performance at frequencies up to 11 GHz, with voltages to 1000 volts rms. This Tyco Electronics connector offers the added benefits of low overall applied cost with a laborsaving two-crimp assembly. The contact is simply crimped to the cable's center conductor, then both braid and cable support are simultaneously crimped to complete the termination. N Series Connectors are available in standard plug, jack, panel jack, bulkhead jack and right-angle plug configurations. Those connectors with a military designation (M39012) are furnished in accordance with all requirements of specification MIL-C-39012, Class II, Category B. Materials Between Series Adapters For N Series Between Series Adapters, see pages 251-260. Brass -- QQ-B-626 Beryllium Copper -- QQ-C-530 Dielectric -- TEFLON TEFLON -- MIL-P-19468 Copper, Annealed -- QQ-C-576 Phosphor Bronze -- QQ-B-750 Silicone Rubber -- ZZ-R-765 Electrical Characteristics Mechanical Characteristics Nominal Impedance -- 50 ohms Working Voltage -- 1000 volts, rms at sea level Frequency Range -- 0 to 11 GHz Voltage Standing Wave Ratio (VSWR) -- Straight Plug or Jack -- 1.3:1 max. Right-Angle Plug -- 1.35 max. at 0 to 9.0 GHz 1.50 max. at 9.0 to 11.0 GHz Contact Resistance -- Outer Contact -- 0.2 milliohms Center Contact -- 1.0 milliohms Right-Angle -- 2.5 milliohms Insulation Resistance -- 5000 megohms min. Dielectric Withstanding Voltage -- 2500 Volts, rms at sea level RF Leakage -- MIL Type, -90 dB min. at 2 to 3 GHz RF Insertion Loss -- MIL Type, 0.15 dB max. at 10 GHz Right-Angle Plug, 0.3 dB max. at 10 GHz Corona Level -- MIL Type, 500 volts min. at 21 336 m [70,000 ft.] Terminator -- Resistance -- 50 ohms 1% Power Rating -- 1.0 watt max. Mating/Unmating -- Threaded coupling Cable Attachment -- Crimp type center contact and braid Coupling Nut Retention -- 445 N [100 lbs.] min. Cable Retention -- 400 N [90 lbs.] min. RG 214/U Cable Durability -- 500 cycles per MIL-C39012 Captive Contact -- 27 N [6 lbs.] min. axial retention, either direction Environmental Characteristics Temperature Range -- MIL Type, -65C to +165C Commercial, -55C to +85C Vibration -- MIL-STD-202, Method 204, Test Cond. B Shock -- MIL-STD-202, Method 213, Test Cond. I Moisture Resistance -- MIL-STD202 Method 106 Salt Spray -- MIL-STD-202, Method 101, Test Cond B Temperature Cycling -- MIL-STD202, Method 107, Test Cond. B (except high temperature is +85C) Note: All data pertains to use with MIL-C39012 specified cables only. Plating Body -- Silver per QQ-S-365 Nickel per QQ-N-290 Center Contact -- Gold per MIL-B-45204 TEFLON is a trademark of E.I. Dupont de Nemours and Company. 20 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) Plugs MIL Type Dual Crimp Semi-Rigid Cable 19.05 Dia. [.750] Max. 21.01 Dia. [.827] Max. 21.01 Dia. [.827] Max. L Max. RG/U Cable Hex Dual Crimp L Max. L Max. Termination Type Body Plating M39012/ Military No. and/ or Comments Dim. L Integral Die Hand Tool O Crimp Nickel Knurl Collar 220045-2 -- O Crimp Silver Knurl Collar 220045-2 O Crimp Nickel Knurl Collar O Crimp Silver Knurl Collar O Crimp Silver Hex Across Flats Center Braid Notes Part No. -- 1 1-5225661-2 -- -- 1 5225361-1 220045-2 -- -- 1 1-5225661-3 220045-2 -- -- 1 5225361-2 220045-2 -- -- 1, 3 5225392-2 220045-2 -- -- 1 5225361-4 Hex Crimp Nickel Knurl Collar 42.85 1.687 42.85 1.687 42.85 1.687 42.85 1.687 42.85 1.687 42.85 1.687 41.35 1.628 39.40 1.550 115A, BELDEN 89880, 9880 O Crimp Nickel Knurl Collar 42.85 1.687 220015-1 -- -- 3 5225092-8 BELDEN 9880 Hex Crimp Nickel Knurl Collar 58485-1 2.54 .100 10.90 .429 2 1-415232-0 402 Semi Rigid (.141) 405 Semi Rigid (.085) Solder Nickel Knurl Collar -- -- -- -- 6057088-1 Solder Nickel Knurl Collar -- -- -- -- 6057094-1 O Crimp Nickel Knurl Collar 220015-1 -- -- -- 1-5227086-0 O Crimp Nickel Knurl Collar 220015-1 -- -- -- 5225661-2 O Crimp Silver 01B0007 Knurl Collar 220015-1 -- -- 3 51692-2 O Crimp Nickel Knurl Collar 220015-1 -- -- 3 5225662-2 11, 11A, 216 O Crimp Silver 01B0013 Knurl Collar 220015-1 -- -- 3 51692-4 BELDEN 9292 O Crimp Nickel -- 39.40 1.550 24.6 .970 24.6 .970 42.85 1.687 42.85 1.687 42.85 1.687 47.22 1.859 42.85 1.687 47.22 1.859 39.40 1.550 42.85 1.687 42.85 1.687 42.85 1.687 39.40 1.550 29.74 1.171 58, 58A, 58B, 58C 223, 55, 55A, 55B 142, 142A 142B, 400 142, 142A 142B Knurl Collar Knurl Collar O Crimp Nickel 8, 8A, 213 Knurl Collar 393 Hex Crimp Nickel Hex Collar BELDEN 8214 O Crimp Nickel Knurl Collar O Crimp Nickel Knurl Collar Silver 01B0008 Knurl Collar 9, 9A, 9B, 214 O Crimp 9, 214 Hex Crimp Nickel Hex Collar LMR 240 Hex/Solder Silver Hex Collar 220045-2 -- -- 3 5225699-1 58436-1 1.73 .068 5.41 .213 2 5415232-4 220015-1 -- -- 3 1-5225662-8 58485-2 3.25 .128 10.90 .429 2 5414160-5 220015-1 -- -- -- 1-5225661-6 220015-1 -- -- -- 5225661-1 220015-1 -- -- 3 51692-1 58485-1 2.54 .100 2 5415232-7 -- -- 10.90 .429 6.81 .268 -- 6274532-1 Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used. 2 Die Set Crimp Tool -- PRO-CRIMPER II Hand Tool, P/N 354940-1 or 626 Series Pneumatic Tool with 679304-1. 3 Weatherproof. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 21 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) 35.86 Max. [1.412] Right-Angle Plugs, Crimp L Max. 21.01 Dia. [.827] Max. RG/U Cable Termination Type Body Plating M39012/ Military No. and/ or Comments Dim. L Integral Die Hand Tool 58A, 58C Hex Crimp Nickel Hex Collar 58436-1 142, 142A, 142B Hex Crimp Nickel Hex Collar O Crimp Nickel Knurl Collar O Crimp Silver 05B0002 Knurl Collar 8, 213 Hex Crimp Nickel Hex Collar 393 O Crimp Silver Knurl Collar O Crimp Nickel Knurl Collar Silver 05B0003 Knurl Collar 57.79 2.275 57.79 2.275 57.79 2.275 57.79 2.275 57.79 2.275 62.31 2.453 57.79 2.275 57.79 2.275 57.79 2.275 8, 8A, 213 9, 9A, 9B 214 O Crimp 9, 214 Hex Crimp Nickel Hex Collar Hex Across Flats Center Braid Notes Part No. 5.41 .213 5.41 .213 1 5415255-1 58436-1 1.73 .068 1.73 .068 1 5415255-2 220015-1 -- -- -- 5225669-2 220015-1 -- -- -- 225014-2 58485-1 2.54 .100 10.90 .429 1 5415255-3 220015-1 -- -- 1,3 225389-6 220015-1 -- -- -- 5225669-1 220015-1 -- -- -- 225014-3 58485-1 2.54 .100 10.90 .429 1 5415255-4 Notes: 1 Die Assembly compatible with Crimp Tool -- PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit 1725837-1, or SDE Electric Terminator 1490076-2. 3 Weatherproof. Jacks L Max. 15.93 Dia. [.627] Max. RG/U Cable Termination Type Body Plating M39012/ Military No. and/ or Comments Dim. L Integral Die Hand Tool 58A, 58C O Crimp Nickel -- 44.83 1.765 41.28 1.625 49.20 1.937 49.20 1.937 49.20 1.937 49.20 1.937 41.28 1.625 26.70 1.051 220045-2 -- 58436-1 1.73 .068 220015-1 -- 220015-1 220015-1 142, 142A, 142B 8, 8A, 213 Hex Crimp Nickel -- O Crimp Silver 02B0008 8, 213 O Crimp Nickel -- 9, 9A, 9B, 214 O Crimp Silver 02B0009 9, 214 O Crimp Nickel -- 393 Hex Crimp Nickel -- 402 Semi Rigid (.141) Solder Nickel -- Hex Across Flats Center Braid Notes Part No. -- 2, 3 1-5225664-2 5.41 .213 2 5415242-2 -- 3 225093-2 -- -- 2, 3 5225664-2 -- -- -- 225093-1 220015-1 -- -- 2, 3 5225664-1 58485-1 2.54 .100 10.90 .429 2 5415242-6 -- -- -- -- 6057116-1 Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used. 2 Die Assembly compatible with Crimp Tool -- PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit 1725837-1, or SDE Electric Terminator 1490076-2. 3 Weatherproof. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 22 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) 16/16.38 [.630/.645] Dia. Bulkhead Jacks, Crimp 13.51/13.79 [.532/.543] L Max. 22.48 Dia. [.885] Max. Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Hex Across Flats Center Braid RG/U Cable Termination Type Body Plating Dim. L Integral Die Hand Tool 58, 58A, 58B, 58C, LMR195 O Crimp Silver 49.61 1.953 45.72 1.800 45.72 1.800 220045-2 -- -- 1 5225363-1 58436-1 5.41 .213 5.41 .213 2 5415248-1 58436-1 1.73 .068 1.73 .068 2 5415248-7 1-5225667-6 Notes Part No. 58A, 58C Hex Crimp Nickel 142, 142A, 142B Hex Crimp Nickel 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269, 89269 O Crimp Nickel 49.61 1.953 220045-3 -- -- -- 8, 213 O Crimp Silver 220015-1 -- -- 2, 3 225094-2 393 O Crimp Nickel 220015-1 -- -- 2, 3 1-225668-1 9, 214 O Crimp Silver 53.98 2.125 53.98 2.125 53.98 2.125 220015-1 -- -- 2, 3 225094-1 Notes: 1 Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used. 2 Die Assembly compatible with Crimp Tool -- PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit 1725837-1, or SDE Electric Terminator 1490076-2. 3 Weatherproof. 16.26 +0.13 -0.25 Dia. [.640 +.005 ] -.010 Bulkhead Jacks for Semi-Rigid Cable 12.88 +0.08 -0.05 Dia. [.507 +.003 ] -.002 Front Mount Rear Mount 5.59 +0.03 -0.05 [.220 +.001 ] -.002 13.72 +0.08 -0.2 [.540 +.003 ] -.008 16.1 Dia. [.630] Max. Maximum Panel Thickness 6.35 [.250] 22.86 Dia. [.900] Max. L Max. L Max. Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout RG/U Cable 402 Semi-Rigid/.141 405 Semi-Rigid/.085 Recommended Panel Cutout Termination Type Body Plating M39012/ Military No. and/or Comments Dim. L Integral Die Hand Tool Part No. Crimp Nickel Rear Mount 29.37 1.156 * 228658-1 Solder Pass. Gold Rear Mount -- * 6057159-1 25.4 1.00 33.9 1.335 -- 6057176-1 -- 6057165-1 Solder Nickel Rear Mount Solder Nickel Rear Mount *Tooling--Hand Tool No. 59980-1, Requires (2) Crimping Dies No. 312253-1 and (1) Locator No. 220220-2. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 23 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) Jack, Panel Mount 16.25 Dia. [.640] Min. 25.40 [1.000] 18.24 .013 [.718 .005] 18.24 .013 [.718 .005] L Max. 3.17 [.125] Dia. (4 Holes) Min. Recommended Panel Cutout RG/U Cable Termination Type Body Plating Dim. L Integral Die Hand Tool 58A, 58C Hex Crimp Nickel 58436-1 142, 142A, 142B Hex Crimp Nickel 8, 213 Hex Crimp Nickel 9, 214 Hex Crimp Nickel RG 225 O Crimp Silver 41.28 1.625 41.28 1.625 41.28 1.625 41.28 1.625 49.20 1.937 Hex Across Flats Center Braid 58485-1 1.73 .068 1.73 .068 2.54 .100 2.54 .100 5.41 .213 5.41 .213 10.90 .429 10.90 .429 220015-1 -- -- 58436-1 58485-1 Notes Part No. -- 5415252-1 -- 5415252-2 -- 5415252-3 -- 5415252-4 3 5225089-4 Note: 3 Weatherproof. Panel Jacks, Solder 25.0 [.986] 18.7 [.736] 2.0 [.080] 25.4 Sq. [1.000] 18.2 [.718] Typ. Body Plating Nickel Nickel 3.0 Dia. [.120] Part No. 1057284-1 1057290-1* *No solder cup -- dielectric protrudes. 9.6 Ref. [.377] Panel Plug, Solder 27.2 [1.070] 20.8 [.819] 2.0 [.080] 2.5 Dia. [.098] O 3.2 Dia. [.125] 4 Plcs. 25.4 Sq. [1.000] 18.2 [.718] Typ. O 3.0 [.120] Body Plating Nickel Nickel Nickel Part No. 1057275-1 1057279-1* 1057277-1* *No solder cup -- dielectric protrudes. O 2.5 [.098] O 3.2 4 Plcs. [.125] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 24 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors N Series Connectors, 50 Ohm (Continued) Panel Mount Jack, Press-Fit 5.15 0.20 [.203 .008] 0.09 9.10 +- 0.05 2.50 0.10 [.098 .004] + .004 [.358 - .002 ] O 14.35 0.05 [.565 .002] O 15.80 0.10 [.622 .004] Dielectric Part No. Gold PTFE 1460055-1 Body Plating White bronze White bronze White bronze Contact Dielectric Part No. Gold Gold Gold PTFE PTFE PTFE 1460118-11 1460118-22 1460118-33 8.70 0.30 [.343 .012] 24.80 0.20 [.976 .008] O 14.90 0.10 [.587 .004] 5/8-24 UNEF-2A M16 x 1 5.00 0.10 [.197 .004] 19.00 0.10 [.748 .004] Hex. Contact 5/8-24 UNEF-2A 6.00 0.10 [.236 .004] Panel Mount Jack, Screw-In Body Plating White bronze 23.30 0.20 [.917 .008] 16.30 0.20 [.642 .008] Notes: 1. Without TUF-LOC Adhesive 2. With TUF-LOC Adhesive around M3 thread 3. With TUF-LOC Spot on M3 thread Feedthru Jack Adapter (Jack-Jack) Plating Part Number 227945-2 Body -- Nickel Dielectric -- General purpose polypropylene Contact -- Gold plated 45.22 Max. [1.780] 15.93 Dia. [.627] Max. Inter-Series Adapters 50.69 [1.996] Jack-Plug Type Jack-Plug TEFLON is a trademark of E.I. Dupont de Nemours and Company. Body Plating Stainless steel/ passivate Contact Dielectric Part No. Gold TEFLON 1057374-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 25 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Quick Lock N (QLN) Series Connectors Product Facts Similar performance and applications to standard N Series Time saving and user friendly snap on/off mating Excellent performance to 6 GHz No torquing of connector required Free rotation of mated connection Higher packaging density can be achieved Fully compatible with Huber&Suhner and Radiall QN Series QLF(R) connectors* Description Material and Finish Electrical Characteristics Mechanical Characteristics Snap-on version of the popular N Series connector Snap-on interface facilitates assembly Same dependable performance as standard N connector Shell -- Brass, plated white bronze Male Pin Center Contact -- Brass, plated gold Female Socket Center Contact -- Beryllium copper, plated gold Outer Contact -- Phosphor bronze, plated white bronze Insulators -- PTFE or PFA Characteristic Impedance -- 50 ohms Frequency Range -- DC to 6 GHz Voltage Standing Wave Ratio (VSWR) -- 1.12 max. DC to 3 GHz Insertion Loss -- 0.15 dB max. DC to 3 GHz Rated Voltage -- 1000 VAC rms, 50 Hz (at sea level) Insulation Resistance -- 5000 megohms min. Contact Resistance -- Center Contact -- 1.5 milliohms max. Outer Contact -- 1.5 milliohms max. Engagement Force -- 30 N typical Disengagement Force -- 30 N typical Interface Retention Force -- 450 N min. Contact Captivation -- 28 N min. Durability -- 100 cycles min. Applications Cellular & PCS Base Stations Broadcast equipment Telephony applications, WLAN Instrumentation and remote measuring equipment Mil Aero, SatCom, Radar Environmental Characteristics Operating Temperature -- -40C to +125C (cable dependent) Thermal Shock -- IEC 60169 para. 16.4 Corrosion -- MIL-STD-202, Method 101, Condition B Vibration -- IEC-1169-1 para. 9.3.3 (10-500 Hz, 5g) IP Rating for Interface -- IP68 (connector dependent) Related Product Data Internet -- http://tycoelectronics.com/products/rfcoax Product Specification/Design Objectives -- 108-2281 * QN and QLF are registered trademarks of Huber&Suhner, Inc. and Radiall S.A.. Huber&Suhner, Inc. and Radiall S.A. are not affiliated with the QLN product. 26 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Quick Lock N (QLN) Series Connectors (Continued) Semi-Rigid Cable -- Direct Solder Attachment 34.29 Ref. [1.35] Straight Cable Plug Bulkhead Cable Jack Cable RG 402 Part No. 1274805-1 Cable RG 402 Part No. 1274806-1 Cable RG 58 RG 142 LMR 240 Part No. 1274688-1 1274688-2 1274688-3 Cable RG 58 RG 142 LMR 240 Part No. 1274689-1 1274689-2 1274689-3 Cable RG 58 RG 142 LMR 240 Part No. 1274804-1 1274804-2 1274804-3 Cable RG 58 RG 142 LMR 240 Part No. 1274734-1 1274734-2 1274734-3 Cable RG 58 RG 142 LMR 240 Part No. 1274735-1 1274735-2 1274735-3 38.10 Ref. [1.50] Flexible Cable -- Crimp Attachment 30.48 Ref. [1.20] Straight Cable Plug Straight Cable Jack 26.92 Ref. [1.06] Right-Angle Cable Plug Bulkhead Cable Jack 4-Hole Square Flange Cable Jack 36.58 Ref. [1.44] 34.54 Ref. [1.36] 34.54 Ref. [1.36] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 27 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Quick Lock N (QLN) Series Connectors (Continued) Panel Mount Receptacles Press-Fit Bulkhead Jack Receptacle -- Solder Terminal O 15.24 Ref. [.600] 20.07 Ref. [.790] Part Number 1274807-1 4-Hole Flange Jack Receptacle -- Solder Terminal 20.07 Ref. [.790] 24.89 Ref. [.980] 17.53 Sq. [.690] Ref. Part Number 1274662-1 Adapters -- Between Series QLN Plug to N Series Jack 41.91 Ref. [1.65] O 18.42 Ref. [.725] N Series Jack Part Number 1274808-1 QLN Plug 9.53 Wrench Flats [.375] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 28 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors Product Facts Hex Crimp and O Crimp Connectors 50 and 75 ohm commercial versions available Provides excellent performance at frequencies up to 7 GHz Low cost commercial type available Commercial type is smaller and lighter weight Tarnish resistant nickel finish Choice of dielectric materials Standard and weatherproof versions available Plugs available for high temperature cable Single Crimp Connectors Fast application-one crimping operation terminates inner conductor, outer braid and cable support Low application cost Connectors for Semi-Rigid Cable Crimp and solder versions available Standard cable stripping dimensions Universal cable termination common to all configurations The Tyco Electronics TNC RF connector family, with 7/16-28 threaded couplings, provides low noise levels and optimum stability, and can withstand the shock and vibration often present in hostile environments. Available in both 50 and 75 ohm versions, these connectors feature numerous styles including cable plugs and jacks, adapters and printed circuit board connectors. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C-39012 specifications. Single crimp connectors provide reduced application time and lower applied costs. This is accomplished by using Tyco Electronics one-crimp operation tooling which simultaneously terminates the inner conductor, outer braid and cable support with one controlled stroke. Tyco Electronics can also supply low-cost alternatives with a commercial type product line. These connectors are designed around the mil-specifications, offering comparable mechanical and electrical performance. Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 R PC Board connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 R Certified by Canadian Standards Association File No. LR 7189 Related Product Data R Military Category -- All crimp connectors are Category B Type (Tyco Electronics Crimp Tooling), unless otherwise noted. Packaging -- All Mil-Type connectors are packaged individually and all Commercial connectors are bulk packaged unless otherwise noted. Between Series Adapters For TNC Between Series Adapters, see pages 251-260. 29 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors (Continued) Specifications Characteristics Single Crimp (MIL Type) Category B O Crimp (MIL Type) Commercial O Crimp & Hex Crimp 50 & 75 Ohm Commercial PCB Commercial Solder Jacks Semi-Rigid Solder Clamp 50 50 50 50 50 50 50 Electrical Impedance, Nom. (Ohms) Working Voltage (Volts RMS) Contact Resistance (Milliohms) Initial Insulation Resistance (Megohms) Dielectric Withstanding Voltage (VAC) Corona Level at 70,000 ft. (Picocoulombs) RF Leakage, Max. (dB) RF Insertion Loss, Max. (dB) Frequency Range (GHz) VSWR in Frequency Range Max. 500 500 500 500 500 335 500 Inner: 1.5 Outer: 3 Inner: 1.5 Outer: 0.2 Inner: 2.0 Outer: 0.3 Inner: 6.0 Outer: 3.0 Inner: 2.75 Outer: 1.0 Inner: 1.5 Outer: 0.2 Inner: 1.5 Outer: 0.2 5000 5000 5000 5000 5000 5000 5000 1500 1500 1500 1500 -- -- 5 max. @ 375 VRMS 55 @ 2-3 GHz 0.2 @ 3 GHz 1500 1500 1500 5 max. @ 375 VRMS 5 max. @ 375 VRMS 55 @ 2-3 GHz 0.2 @ 3 GHz -- -- -- 5 max. @ 375 VRMS 60 @ 2-3 GHz 0.18 @ 9 GHz -- -- 5 max. @ 375 VRMS 60 @ 2-3 GHz 0.06 @ 3-6 GHz 0-4 0-11 0-7 0-4 0-4 0-15 0-11 -- 1.35 1.3 1.40 -- -- 1.35 1.30 @ 4 GHz 10/2 [44.5/8.9] 100 [444.8] 60 [266.9] RG 58C/U 500 25 [2.8] 2/2 [8.9/8.9] 100 [444.8] 60 [266.9] RG 58C/U 500 25 [2.8] 6/6 [26.7/26.7] 60 [266.9] 60 [266.9] RG 58C/U 500 25 [2.8] -- -- -- -- 60 [266.9] (PCB Ret) 500 25 [2.8] 500 25 [2.8] 2 [.023] 100 [444.8] 60 [266.9] 500 25 [2.8] 2 [.023] 100 [444.8] 40 [178.0] 500 25 [2.8] -65 to +85 -65 to +1651 -55 to +852 MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, (100 G's) MIL-STD-202 Method 107 Cond. B -55 to +85 -55 to +85 -65 to +165 -65 to +105 -65 to +165 MIL-STD-202 Method 201A Cond. A MIL-STD-202 Method 213 Cond. I, (100 G's) MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, (100 G's) MIL-STD-202 Method 202 Cond. B MIL-STD-202 Method 213 Cond. I MIL-STD-202 Method 202 Cond. B MIL-STD-202 Method 213 Cond. I MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B -- -- 108-12032 -- Mechanical Force to Engage/ Couple, lbs. [N] Coupling Nut Retention, Min. lbs. [N] Cable Retention, lbs. [N] Durability (Cycles) Jam Nut Mounting Torque, Max. lbs. [N*m] -- Environmental Temperature Range, Operating (C) Thermal Shock MIL-STD-202 Method 107 Moisture Resistance MIL-STD-202 Method 106 MIL-STD-202 Method 106 Salt Spray MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, (100 G's) MIL-STD-20 Method 107 Cond. A MIL-STD-202 Method 106 Type II MIL-STD-202 Method 101 Cond. B -- 108-12001 108-12046 Vibration Physical Shock Product Specification 1Assembled 2Assembled MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. G, (50 G's) to cable with polytetrafluorethylene dielectric. to cable with polyethylene dielectric. 30 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors (Continued) Specifications (Continued) Commercial O Crimp & Hex Crimp 50 & 75 Ohm Commercial PCB Commercial Solder Jacks Semi-Rigid Solder Clamp Brass QQ-B-626 -- -- Brass QQ-B-626 Brass QQ-B-626 Brass MIL-C-21768 -- -- Brass QQ-B-626 Brass QQ-B-626 Brass QQ-B-626 Zinc QQ-Z-363 Zinc QQ-Z-363 Zinc QQ-Z-363 Brass QQ-B-626 Brass QQ-B-626 TEFLON MIL-P-19468 TEFLON MIL-P-19468 Polyethylene Polypropylene Gen. Purpose Polypropylene Gen. Purpose1 TEFLON MIL-P-19468 Polyester PBT MIL-P-24519 TEFLON MIL-P-19468 TEFLON MIL-P-19468 Brass QQ-B-626 Beryl. Copper ASTM-B-643, QQ-C-530 Silicon Rubber QQ-R-765 Copper QQ-C-576 Brass QQ-B-626 Beryl. Copper ASTM-B-643, QQ-C-530 Silicon Rubber QQ-R-765 Copper QQ-C-576 Brass QQ-B-626 -- -- Brass QQ-B-626 Brass QQ-B-626 Beryl. Copper QQ-C-530 Phos. Bronze QQ-B-570 Phos. Bronze QQ-B-570 Beryl Copper QQ-C-530 Beryl Copper QQ-C-530 Silicon Rubber QQ-R-765 Copper QQ-C-576 -- -- Silicone Rubber QQ-R-765 Silicone Rubber QQ-R-765 -- -- -- -- Collar Silver QQ-S-365 Silver QQ-S-365 -- -- Nickel QQ-N-290 Nickel QQ-N-290 Outer Contact (Plug & Jack) Silver QQ-S-365 Bright Nickel QQ-N-290 Bright Nickel QQ-N-290 Bright Nickel QQ-N-290 Nickel QQ-N-290 Nickel QQ-N-290 Center Contact (Plug & Jack) Gold MIL-G-45204 Silver QQ-S-365 Tin Lead, ASTM-B-545 Silver, QQ-S-365 Gold, MIL-G-45204 Tin Lead, ASTM-B-545 Silver, QQ-S-365 Gold, MIL-G-45204 Gold MIL-G-45204 Gold MIL-G-45204 Silver QQ-S-365 Gold MIL-G-45204 Bright Nickel QQ-N-290 Bright or Matte Nickel QQ-N-290 Tin Lead, ASTM-B-545 Silver, QQ-S-365 Gold, MIL-G-45204 Tin Lead ASTM-B-5 -- -- -- -- Single Crimp (MIL Type) Category B O Crimp (MIL Type) Brass QQ-B-626 Phos. Bronze QQ-B-750 Beryl. Copper QQ-C-530 Brass QQ-B-626 Phos. Bronze QQ-B-750 Beryl. Copper QQ-C-530 Brass QQ-B-626 Dielectric Center Contact (Plug) Characteristics Connector Material Collar Outer Contact (Plug) Outer Contact (Jack) Center Contact (Jack) Gasket Ferrule Connector Primary Finishes2 Ferrule 1Several 2If pc board connectors have an outer polyester PBT insulator per MIL-P-24519. several finishes are listed, refer to individual catalog page(s) or customer drawings for exact specifications. TEFLON is a trademark of E.I. Dupont de Nemours and Company. 31 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm Plugs, Crimp Hex Crimp and O Crimp MIL Type O Crimp Weatherproof L Max. 13.21 Dia. [.520] Max. 16.26 Dia. [.640] Max. L Max. Dim. L CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. RG/U Cable Termination Type Center Contact Plating 174, 188, 188A, 316 179, 179A, 179B 161, 187, 187A BELDEN 9221 Hex Crimp Gold Nickel Polypropylene Commercial -- 31.24 1.230 -- 58436-3 5222506-5 Hex Crimp Gold Nickel Polypropylene Commercial -- 31.24 1.230 -- 58436-3 5222506-6 Hex Crimp Gold Nickel Polypropylene Commercial -- 31.25 1.230 34.93 1.375 34.93 1.375 50.8 2.000 50.8 2.000 -- 58436-11 5222506-1 220045-2 -- 5225555-2 220045-2 -- 5225555-6 220015-1 -- 5225555-7 220015-1 -- 5225555-8 Body Plating Dielectric Style Comments 58, 58A, 58B, 58C O Crimp Gold Nickel TEFLON MIL Type Weatherproof 142, 142A 142B, 400 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 8, 8A, 213 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 9, 9A, 9B, 214 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 1Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 32 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Plugs for Semi Rigid-Cable 19.6 Ref. [.770] A Dia. 16.5 Dia. [.650] Max. B Dia. 16.26 Dia. [.640] Max. 23.4 [.921] Max. Solder Type Crimp Type RG/U Cable 405 Semi-Rigid/ 2.18 [.086] 402 Semi-Rigid/ 3.66 [.141] RG 402/U .141 3.66 [.141] 1Hand Termination Type Center Contact Plating Body Plating Dielectric Style Comments Dim. A Solder Gold Passivate Solid PTFE MIL Type -- 2.3 .089 Crimp Gold Nickel TEFLON Commercial Weather proof Solder Gold Gold Solid PTFE MIL Type -- 3.7 .144 Dim. B Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. 3.0 .120 -- 3 1057635-1 -- 1 2 228179-3 4.6 .180 -- 3 1057631-1 Tool 59980-1, Requires (2) Crimping Dies 312253-1 and (1) Locator 312644-1. Tool 58318-1, Requires (2) Crimping Dies 313720-1 and (1) Locator 312645-1. to Recommended Assembly Tools in Tool Section. 2Pneumatic 3Refer TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 33 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Right-Angle Plugs, Crimp O Crimp MIL Type O Crimp Weatherproof 31.75 [1.250] 27.43 Max. [1.080] L Max. L Max. 16.26 Dia. [.640] Max. 13.21 Dia. [.520] RG/U Cable Termination Type Center Contact Plating 174, 174A, 188 188A, 316 58, 58A, 58B 58C 55, 55A, 55B 223 142, 142A, 142B 400 O Crimp Gold Nickel O Crimp Gold Nickel TEFLON MIL Type Weatherproof O Crimp Gold Nickel Polymethylpentene Commercial -- O Crimp Gold Silver TEFLON MIL Type Weatherproof 8, 8A, 213 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 393, 225 O Crimp Gold Silver TEFLON MIL Type Weatherproof 9, 9A, 9B, 214 O Crimp Gold Silver TEFLON MIL Type -- Body Plating Dielectric Style Comments Polymethylpentene Commercial -- Dim. L CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. 38.23 1.505 47.63 1.875 38.23 1.505 47.63 1.875 63.5 2.500 63.5 2.500 59.52 2.343 -- 318450-2 5414173-3 220045-2 -- 5225559-2 -- 220189-1 5414173-6 220045-2 -- 5225554-6 220015-1 -- 5225559-8 220015-1 -- 1-5225554-1 220015-1 -- 5225349-9 TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 34 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Jacks, Crimp O Crimp MIL Type O Crimp Weatherproof L Max. 11.43 Dia. [.450] Max. L Max. 11.43 Dia. [.450] Max. RG/U Cable Termination Type Center Contact Plating 174, 174A, 188 188A, 316 58, 58A, 58B 58C O Crimp Gold Nickel Polymethylpentene Commercial -- O Crimp Gold Silver TEFLON MIL Type Weatherproof 141, 141A, 303 O Crimp Gold Silver TEFLON MIL Type Weatherproof 55, 55A, 55B 223 142, 142A, 142B 400 O Crimp Gold Nickel Polymethylpentene Commercial -- O Crimp Gold Silver TEFLON MIL Type Weatherproof Body Plating Dielectric Style Comments Dim. L CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. 30.48 1.200 35.72 1.406 35.72 1.406 29.85 1.175 35.72 1.406 -- 318450-2 5414171-3 220045-2* -- 225551-2 220045-2* -- 225551-5 -- 220189-1 414171-6 220045-2* -- 225551-6 *Battery, Pneumatic Jacks, Solder/Clamp 33.3 [1.31] 14.3 Dia. [.562] 12.7 A/F [.500] 11.1 A/F [.437] RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style Part No. RG 58C/U, RG 141 A/U Solder/Clamp Gold Silver TEFLON MIL Type 1312569-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 35 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp Single Crimp O Crimp H H L Max. L Max. +.013 -.000 12.83 +0.05 Dia. [.505 -0.00 ] 5.54 [.218 +.008 -.000 +0.03 -0.00 ] Maximum Panel Thickness Single Crimp 3.18 [.125]; Dual Crimp 6.35 [.250] Recommended Panel Cutout H= 11/16 [.6875] max. across flats, 20.32 [.800] max. across points. Dim. L CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. RG/U Cable Termination Type Center Contact Plating 174, 174A, 316 188, 188A 179, 179A, 179B 161, 187, 187A BELDEN 9221 RD 188, 316 Double Braid 58, 58A, 58B, 58C 141, 141A, 303 223 55, 55A, 55B O Crimp Gold Nickel Polymethylpentene Commercial -- 34.93 1.375 -- 318450-2 5414168-3 Single Crimp Gold Nickel TEFLON MIL Type -- 38.1 1.500 -- 91910-1 5331238 - O Crimp Gold Nickel Commercial -- -- 58539-1 5414168-4 O Crimp Gold Nickel Commercial -- -- 220189-1 5414168-1 O Crimp Gold Nickel Commercial -- -- 220189-1 5414168-6 O Crimp Gold Nickel Polymethylpentene Polymethylpentene Polymethylpentene Polymethylpentene Commercial -- -- 220189-1 5414168-5 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 220045-2 -- 5225557-6 142, 142A 142B, 400 Body Plating Dielectric Style Comments 34.93 1.375 34.93 1.375 34.93 1.375 34.93 1.375 38.1 1.500 BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 36 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Bulkhead Jacks for Semi-Rigid Cable, Rear Mount +.013 12.83 -.000 Dia. [0.505 +0.05 ] -0.00 +.008 5.54 -.000 +0.03 [.218 -0.00 ] H L Max. Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout H= 17.45 [.687] max. across flats, 20.32 [.800] max. across points. RG/U Cable 402 Semi-Rigid/ 3.66 [.141]* Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Part No. Crimp Gold Nickel TEFLON MIL Type 25.4 1.000 228502-1 *Tooling--Hand Tool 59980-1, Requires (2) Crimping Dies 312253-1 and (1) Locator 220220-2. 30.5 Ref. [1.200] 20.9 [.821] 12.1 [.475] Min. 6.40 Max. [.250] Panel A Dia. 12.7 Dia. [.500] Min. B Dia. Recommended Panel Cutout RG/U Cable 15.9 Hex. [.625] 19.1 Hex. [.750] Termination Type Center Contact Plating Body Plating Dielectric Style Dim. A Dim. B Part No. Solder Gold Solid PTFE MIL Type Gold Solid PTFE MIL Type 3.7 .144 2.3 .089 4.6 .180 3.0 .120 1057676-1 Solder Pass. Stainless Steel Pass. Stainless Steel RG 402/U 3.66 [.141] RG 405/U 2.16 [.085] 1057679-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 37 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Panel Jacks, Crimp 11.2 Dia. [.441] Min. 12.7 0.1 [.500 .004 ] 12.7 0.1 [.500 .004 ] 2.71 Dia. [.107] Min. Clearance for 3-56 Screws (4 Holes) 17.86 Sq. [.703] Max. L Max. Recommended Panel Cutout RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L CERTI-CRIMP Hand Tool With Integral Die Part No. Crimp Gold Silver TEFLON MIL Type 34.93 1.375 220045-2 225348-2 Dim. A Dim. B Part No. 3.7 .144 Min. 2.3 .089 Min. 4.6 .180 3.0 .120 1057697-1 58, 58A, 58B, 58C Panel Jacks for Semi-Rigid Cable 22.9 [.900] 16.3 [.642] 14.3 [.562] A Dia. 17.5 Sq. [.687] 12.7 [.500] Typ. B Dia. 3.20 Dia. [.125] 4 Plcs. RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style Solder Gold Gold TEFLON MIL Type Solder Gold Gold TEFLON MIL Type RG 402/U 3.66 [.141] RG 405/U 2.16 [.085] 1057699-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 38 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Right-Angle PC Board/ Panel Mount Jacks VALOX Body Metal Body 1/2-28 Thread 1/2-28 Thread 15.88 [.625] Mtg. Hgt. +0.13 12.83 -.000 [.505 +0.05 ] -0.00 Dia. C L A B 15.88 [.625] Mtg. Hgt. C L 34.93 [1.375] A B 34.93 [1.375] +.008 5.54 -.000 [.218 +0.03 ] -0.00 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Body Material Center Contact Plating VALOX, White 50 Gold Metal 50 Gold Dimensions A B 8.56 .337 8.26 .325 21.21 .835 20.83 .820 Part Numbers 5227818-1 5227839-1 G 10.16 0.08 [.400 .003] 2.01 0.08 Dia. [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] S G 2.54 0.05 [.100 .002] 5.08 0.05 [.200 .002] Mating 0.89 0.08 Dia. Face [.035 .003] (2 Holes) (Top View) Recommended PC Board Layout Vertical PC Board/ Panel Mount Jacks VALOX Body 1/2-28 Thread *2-56 Self-Tapping Screws: For 1.57 [3/32] or greater panel thickness Part No. 221108-2 For less than 1.57 [3/32] panel thickness Part No. 221108-4 15.88 [.625] B Lockwasher and Jam Nut Part No. 1-329632-2 Body Material Center Contact Plating VALOX, White Gold Part No. 1-329631-2 5.08 [.200 34.93 [1.375] Mtg. Hgt. Dimension B 21.21 .835 5227820-1 2.01 0.08 Dia. [.079 .003] (2 Holes) 0.05 .002] 2.54 0.05 [.100 .002] 10.16 0.08 [.400 .003] G VALOX is a trademark of General Electric Company. Part Number S 10.16 0.08 [.400 .003] 5.08 [.200 0.05 .002] 0.89 0.08 Dia. [.035 .003] (2 Holes) (Top View) Recommended PC Board Layout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 39 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Right-Angle PC Board/ Mount Jacks 23.62 [.930] Plating Body -- Nickel Center Contact -- Gold Dielectric -- TEFLON 28.98 [1.141] Part No. 5413933-1 6.60 [.260] 2.74 Dia. [.108] 2 Holes 5.59 [.220] 3.43 Dia. [.135] 2 Holes 3.30 8.26 [.130] [.325] 6.60 [.260] 16.51 [.650] 2.29 Dia. [.090] 2 Holes 3.30 [.130] 1.27 Dia. [.050] 2.79 [.110] Recommended PC Board Cutout Accepts 1.5 Dia. Max. Wire [.059] Bulkhead Solder Jacks 9.65 [.380 Insulation Bushing L Max. Material -- Nylon Part No. 227223-1 0.89 [.035] +0.13 -.000 +.005 -.000 ] Dia. 3.96 [.156 4.04 Max. [.159] 11.43 [.450] 13.09 Dia. [.515] Max. 0.89 [.035] Max. +0.08 -.000 +.003 -.000 ] Dia. Recommended Panel Cutout (Jack) Panel Thickness Refer to chart below. 14.86 [.585] 9.53 [.375] 10.93 [.430] Max. 11.56 0.08 Dia. [.455 .003] Body Plating Center Contact Plating Dielectric Dim. L Panel Thickness Part Number Nickel Gold VALOX 33.33 1.312 1.17-6.35 .046-.250 5227764-2 10.97 0.08 [.432 .003] Recommended Panel Cutout (Bushing) TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 40 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 50 Ohm (Continued) Panel Mount Jack Receptacles 25.9 Ref. [1.000] 19.1 Sq. [.750] 10.1 [.750] 13.5 [.531] Typ. 2.0 [.080] 1.6 Dia. [.062] Shell Part No. Nickel Plated Brass 1057775-11 1Captured Center Contact 2.2 Dia. [.086] 3.2 Dia. [.125] 4 Plcs. Flange Mount Receptacles 37.0 [1.455] 10.1 [.750] 2.0 [.080] 15.0 [.590] 19.1 [.750] Sq. 7.0 Dia. [.275] 13.5 [.531] Typ. Shell Part No. Nickel Plated Brass 1057780-11 1Captured Center Contact 2.2 Dia. [.086] 3.2 Dia. [.125] 4 Plcs. Jack-Jack Adapter Center Contact Plating Gold 12.96 Dia. [.510] Max. Body Plating Dielectric Part No. Nickel Polypropylene 5221325-1 36.2 Max. [1.425] Bulkhead Jack-Jack Adapter +0.13 12.83 -.000 [.505 +.005 ] -0.00 Dia. Center Contact Plating Gold Body Plating Dielectric Part No. Nickel Acetal 221500-1 +0.08 5.54 -.000 [.218 +.003 ] -0.00 40.14 Max. [1.580] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 41 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 75 Ohm Plugs, Crimp Hex Crimp and O Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling listed below is different from the equivalent 50 ohm connectors. 12.96 Dia. [.510] Max. L Max. Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. 318451-2 5221506-3 Commercial 27.79 1.094 29.46 1.160 58174-1 5221506-5 RG/U Cable Termination Type Center Contact Plating 179, 179A, 179B, 187, 187A, BELDEN 9221 AT&T 735A 302 BELDEN 88241 89269 Hi-Temp 62A Times PL62, BERK-TEK BTDC-59, BTDC-62 BELDEN 8281 9141, 9231 O Crimp Gold Nickel O Crimp Gold Nickel Polymethylpentene Polymethylpentene Hex Crimp Gold Nickel Polymethylpentene Commercial 31.75 1.250 58425-1 5413591-1 O Crimp Gold Nickel Polymethylpentene Commercial 32.9 1.295 58538-1 5221506-2 Body Plating Dielectric Style Dim. L Commercial Bulkhead Jack, Crimp +0.13 12.83 -.000 [.505 +.005 ] -.000 Dia. +0.08 5.54 -.000 [.218 +.003 ] -.000 H 34.29 Max. [1.350] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout RG/U Cable 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9169, 89269 Termination Type Center Contact Plating Body Plating Dielectric Style O Crimp Gold Nickel Polymethylpentene Commercial Dim. H 11/16 across flats, 20.32 .800 max. across points Tooling Part No. Use Hand Tool 354940-1 with Die Set 58536-1 221509-1 AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 42 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors TNC Connectors, 75 Ohm (Continued) Right-Angle PC Board/ Panel Mount Jacks Metal Body 1/2-28 Thread +0.13 12.83 -.000 [.505 +0.05 ] -0.00 Dia. 15.88 [.625] Mtg. Hgt. C L +.008 5.54 -.000 [.218 +0.03 -0.00 A B 34.93 [1.375] ] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Body Material Center Contact Plating A B Metal 75 Gold 8.26 .325 20.83 .820 Dimensions Part Numbers Without With Mounting Posts Mounting Posts -- 5413506-1 Bulkhead Jack-Jack Adapter Center Contact Plating Gold Body Plating Dielectric Part No. Nickel Polymethylpentene 414396-1 40.14 Max. [1.580] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 43 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors Full range of Hex Crimp and O Crimp Products for common coaxial cables. Low VSWR Single crimp connectors offer one crimping operation for fast application Twist-on connectors require no special tooling for application to the cable Field serviceable (Category A) connectors qualified to MIL-C-39012 Field replaceable (Category C) plugs with captivated center contact Field replaceable plugs can be terminated with industry standard tooling Tarnish resistant Nickel finish available Choice of different dielectrics Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 R PC Board soldered connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 The Tyco Electronics BNC RF connector family with bayonet locking coupling provides highly reliable, quick connect/disconnect coaxial connections. Exclusive single and O crimp terminations allow positive insulation grip and require no soldering, providing terminations at a very low overall applied cost. Available in both 50 and 75 ohm versions, these con- nectors feature numerous styles including cable plugs and jacks, adapters and printed circuit board connectors. In addition to a variety of crimp type terminations, connectors are furnished in field replaceable and twist-on styles. These connectors accept a wide range of coaxial cables and are intermateable with industry standard connectors designed to MIL-C39012 specifications. Tyco Electronics can also supply low cost alternatives with an extensive commercial type product line. A lower cost consumer series product offers the capability to supply center contacts in strip form and allow for automated center contact crimp technology. All connectors are designed around the mil-specifications, but utilize low-cost materials, offering comparable mechanical and electrical performance. 108-12002 -- BNC Commercial T Adapter 108-12095 -- BNC Commercial 75 Ohm Connectors 108-12096 -- BNC Commercial FeedThru and Bulkhead Adapters 108-12079 -- BNC Commercial 50 Ohm Solder Jacks 108-12103 -- BNC Commercial PCB Press Fit Jacks Application Specifications -- 114-12001 -- BNC Commercial PCB Jack Press Fit Performance Specifications -- Page 45 Material Specifications -- Page 46 Tooling -- Pages 266-268 Military Category -- All MIL type O crimp connectors are Category B Type (Tyco Electronics Crimp Tooling), unless otherwise noted. Packaging -- All MIL Type connectors are packaged individually, all O crimp connectors are bulk packaged and all Hex crimp connectors are individually packaged unless otherwise noted. R Certified by Canadian Standards Association File No. LR 7189 R Between Series Adapters For BNC Between Series Adapters, see pages 251-260. Related Product Data Product Specifications -- 108-1275 -- BNC Ohm Terminators 108-12020 -- BNC O Crimp Connectors 108-12044 -- BNC Commercial Hex Crimp 108-12047 -- BNC Commercial and Hex Crimp Connectors 108-12074 -- BNC Solder Jacks 108-12075 -- BNC Connectors (Category A) 108-12078 -- BNC Commercial PCB Panel-Mount Jacks 44 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications Characteristics Electrical Impedance, Nom. (Ohms) Working Voltage (Volts RMS) Contact Resistance (Milliohms) Initial Insulation Resistance (Megohms) Dielectric Withstanding Voltage (VAC) Corona Level at 70,000 ft. (Volts, RMS) RF Leakage, Max. (dB) RF Insertion Loss, Max. (dB) Frequency Range (GHz) VSWR in Frequency Range Max. Mechanical Force to Engage (lbs. [N])/couple, (in-lbs. [N-M]) max. Coupling Nut Retention, Min. N [lbs.] Cable Retention, N [lbs.] Durability (Cycles) Jam Nut Mounting Torque, Max. [N*m] (in. lbs.) Environmental Temperature Range, Operating (C) Vibration Physical Shock Single Crimp (MIL Type) Category B O Crimp (MIL Type) Straight Solder Clamp Right-Angle Solder Clamp Commercial O Crimp & Hex Crimp 50 Ohms Commercial O Crimp & Hex Crimp 75 Ohms Commercial PC Board 50 & 75 Ohms Commercial Solder 50 Ohm Jacks 50 50 50 50 50 75 50 & 75 50 & 75 500 500 500 500 500 500 500 500 Inner: 1.5 Outer: 0.3 Inner: 1.5 Outer: 0.2 Inner: 1.5 Outer: .20 Inner: 1.5 Outer: .20 Inner: 2.0 Outer: 1.0 Inner: 2.0 Outer: 2.0 Inner: 6/1.5 Outer: 3/0.2 Inner: 2.75 Outer: 1.0 5000 5000 5000 5000 5000 5000 5000 5000 1500 1500 1500 1500 1500 1500 1500 1500 375 375 375 375 375 375 -- 375 -- -55 at 2-3 GHz 0.2 at 3 GHz -55 at 2-3 GHz 0.3 at 3 GHz -55 at 2-3 GHz 0.2 at 3 GHz -55 at 1-2 GHz 0.15 at 2 GHz -- -- -- -55 at 2-3 GHz 0.2 at 3 GHz -- -- 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 and 0-2 0-4 1.35 1.30 1.30 1.35 1.30 1.30 -- -- 13.3/11.12 [3/2.5] 444.8 [100] 266.9 [60] (RG58C/U) 500 25 [2.8] 13.3/11.12 [3/2.5] 444.8 [100] 266.9 [60] (RG58C/U) 500 25 [2.8] 13.3/.028 [3/2.5] 444.8 [100] 177.9 [40] (RG58C/U) 500 25 [2.8] 13.3/.028 [3/2.5] 444.8 [100] 177.9 [40] (RG58C/U) 500 26.7/26.69 [6/6.0] 266.9 [60] 266.9 [60] (RG58C/U) 500 25 [2.8] 26.7/26.69 [6/6.0] 266.9 [60] 266.9 [60] (RG58C/U) 500 25 [2.8] -- -- -- -- 266.9 [60] (PCB Ret) 500 253/124 [2.8/1.4] 500 25 [2.8] -55 to +85 -65 to +165 MIL-STD-202 Method 201A -65 to +1651 -55 to +852 MIL-STD-202 MIL-STD-202 Method 204 Method 204 Cond. B Cond. B MIL-STD-202 MIL-STD-202 Method 213 Method 213 Cond. G, 50 G's Cond. G, 50 G's -65 to +85 -- -65 to +165 -65 to +165 -55 to +85 -55 to +85 MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. G MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. G MIL-STD-1344 Method 2005 Cond. III MIL-STD-1344 Method 2004 Cond. G, 100 G's MIL-STD-1344 Method 1003 Cond. A MIL-STD-1344 Method 1002 Type II MIL-STD-1344 Method 1001 Cond. B 108-12044 108-12047 MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, 100 G's MIL-STD-202 Method 213 Cond. I or A, 50 G's MIL-STD-202 Method 204 Cond. B MIL-STD-202 Method 213 Cond. I, 100 G's MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B 108-12095 108-12078 108-12079 Thermal Shock MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 107 MIL-STD-202 Method 107 Moisture Resistance MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 106 MIL-STD-202 Method 106 Salt Spray MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B MIL-STD-202 Method 101 Cond. B 108-12002 108-12020 -- -- Product Specification -- 1Assembled to cable with polytetrafluorethylene dielectric. to cable with polyethylene dielectric. 3For Metal Threads 4For Polyester Threads 2Assembled 45 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued) Connector Component Single Crimp (MIL Type) Category B&C O Crimp (MIL Type) Straight Solder Clamp Right-Angle Solder Clamp Commercial O Crimp Hex Crimp & Terminators Commercial PCB Solder Commercial PCB Press Fit Commercial Solder Ohm Jacks Brass QQ-B-626 Brass QQ-B-626 Beryl. Copper QQ-C-530 Brass QQ-B-626 Brass Brass Brass QQ-B-626 Zinc QQ-Z-363 -- -- -- Phos. Bronze QQ-B-750 Brass Brass Brass MIL-C-21768 -- -- -- Zinc QQ-Z-363 Zinc Zinc QQ-Z-363 Adapters Connector Material Collar Outer Contact (Plug) Shell (Jack) Brass QQ-B-626 Brass QQ-B-626 Brass -- Zinc QQ-Z-363 Dielectric TEFLON MIL-P-19468 Polypropylene Gen. Purpose TEFLON MIL-P-19468 TEFLON TEFLON Polyethylene Polypropylene Polymethylpentene Gen. Purpose Center Contact (Plug) Brass QQ-B-626 Brass QQ-B-626 Brass Brass Brass QQ-B-626 -- -- -- Center Contact (Jack) Beryl. Copper ASTM-B-643 QQ-C-530 Beryl. Copper ASTM-B-643 QQ-C-530 Beryl. Copper Beryl. Copper Beryl. Copper QQ-C-530 Phos. Bronze QQ-B-750 Beryl. Copper QQ-C-530 Phos. Bronze QQ-B-570 Beryl. Copper QQ-C-530 Silicon Rubber QQ-R-765 Copper Ferrule QQ-C-576 Connector Primary Finishes2 Silicon Rubber QQ-R-765 Copper QQ-C-576 Silicon Rubber Silicon Rubber -- -- -- -- -- Silicon Rubber QQ-R-765 Copper QQ-C-576 TEFLON MIL-P-19468 Polypropylene, Gen. Purpose Brass QQ-B-626 Beryl. Copper QQ-C-530 Phos. Bronze QQ-B-570 Beryl. Copper QQ-C-530 Silicon Rubber QQ-R-765 -- -- -- -- Silver/ Bright Nickel Silver/ Bright Nickel Bright Nickel QQ-N-290 -- -- -- -- Tin Lead ASTM-B-545 -- -- -- Gasket Collar Silver QQ-S-365 Bright Nickel QQ-N-290 Silver QQ-S-365 Bright Nickel QQ-N-290 Silver QQ-S-365 Bright Nickel QQ-N-290 Outer Contacts (Plug & Jack) QQ-S-365 Gold Center Contacts (Plug & Jack) MIL-G-45204 Silver Gold MIL-G-45204 Gold Ferrule3 QQ-S-365 Silver QQ-S-365 Tin Lead ASTM-B-545 -- Silver/ Bright Nickel Polymethylpentene TEFLON MIL-P-19468 Gen. Purpose1 QQ-Z-363 Brass QQ-B-626 TEFLON MIL-P-19468 Polyester PBT MIL-P-24519 Brass QQ-B-626 Brass QQ-B-626 Beryl. Copper QQ-C-530 Brass QQ-B-626 Silver QQ-S-365 Bright Nickel QQ-N-290 Silver Bright or Silver/ Bright Nickel Bright Nickel Bright Nickel QQ-S-365 Matte Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 Tin Lead Tin Lead Tin Lead Silver ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365 Gold Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204 -- 1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519. more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 3Ferrules with tin-lead finish are used with nickel plated outer contacts. 2If TEFLON is a trademark of E.I. Dupont de Nemours and Company. 46 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm Plugs, Crimp Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. 14.53 [.572] Dia. Max. L Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 -- 69471- RG/U Cable Termination Type Body Plating Dielectric Style Dim. L 178, 178A, 178B, 196, 196A Single Crimp Silver TEFLON MIL Type 33.33 1.312 69245-4 Hex Crimp Nickel Polyethylene Commercial -- 58436-3 -- 2-5221128-1 O Crimp Nickel Polyethylene Commercial 220009-5 318450-2 220217-3 1-5227079-6 O Crimp Nickel TEFLON MIL Type -- 1424050-1 220026-1 5225395-7 Single Crimp Silver TEFLON MIL Type 69245-2 -- 69422- 2-5330061-1 Hex Crimp Nickel Polyethylene Commercial -- 2-5221128-3 O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 RD 316, 188, Double Braid BELDEN 8219 BELDEN 9907, 89907 COMM/ SCOPE 2104 BELDEN 8218 Part No. 5330876-0 Hex Crimp Nickel Polyethylene Commercial O Crimp Nickel Polyethylene Commercial 33.53 1.320 27.69 1.090 30.18 1.188 33.33 1.312 33.53 1.320 27.69 1.090 -30.18 1.188 33.33 1.312 27.69 1.090 33.53 1.320 27.69 1.090 O Crimp Nickel Polyethylene Commercial 27.69 1.090 220187-1 318452-2 220217-1 6-5227079-84 O Crimp Nickel Polyethylene Commercial 69477-4 58539-1 58376-1 1-5227079-9 O Crimp Nickel TEFLON MIL Type 27.69 1.090 30.18 1.188 -- 91904-1 69669-2 1-5225395-0 Single Crimp Silver TEFLON MIL Type O Crimp Nickel Polyethylene Commercial -- 58436-3 -- 1424050-1 220217-3 2-5227079-2 -- -- 220026-1 5225395-8 -- 91910-1 69408- 2-5329446-1 69477-4 58539-1 -- 8-5227079-2 -- 58436-12 -- 2-5221128-7 220187-1 58435-11 220217-1 6-5227079-73 1Order Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only. 4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only. 2Order 3For BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 47 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. RG/U Cable 58, 58A, 58B, 58C BELDEN 88240, BERK-TEK BTDC-58, COMM/ SCOPE 2135 223, 55, 55A, 55B 142, 142A, 142B, 400 Termination Type Body Plating Dielectric Style Dim. L Hex Crimp Nickel Polyethylene Commercial O Crimp Nickel Polyethylene Commercial 33.53 1.320 27.69 1.090 33.74 1.328 33.33 1.312 33.53 1.320 33.33 1.312 33.33 1.312 27.69 1.280 43.64 1.718 33.33 1.312 27.69 1.090 30.18 1.188 33.33 1.312 O Crimp Nickel TEFLON MIL Type Single Crimp Silver TEFLON MIL Type Hex Crimp Nickel Polyethylene Commercial O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type Single Crimp Silver TEFLON MIL Type O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type Single Crimp Silver TEFLON MIL Type 14.53 [.572] Dia. Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 L Max. Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 58436-12 -- 5221128-13 220187-1 58435-11 220217-1 5227079-5 269478-1 220189-3 69727- 5225395-1 2-- 91904-4 69223-1 2-5329444-1 -- 58436-12 -- 1-5221128-0 220217-1 4-5227079-3 69727- 4-5225395-2 220187-1 58435-11 269478-1 220189-3 220187-1 58435-11 269478-1 -- 220217-1 5227079-6 220189-3 69727- 5225395-3 91904-3 69424- 2-5329444-2 220217-1 6-5227079-1 220187-1 58435-11 269478-1 220189-3 69727- 269331-1 -- 69429-1 5225395-6 2-5330358-2 Consult Tyco Electronics for recommended crimp tooling. 1Order Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3Bulk packaged. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 48 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Crimp (Continued) Single Crimp Hex and O Crimp L Max. 14.53 [.572] Dia. Max. RG/U Cable 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 Termination Type Body Plating Dielectric Style Dim. L Hex Crimp Nickel Polyethylene Commercial 14.53 [.572] Dia. Max. L Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 58436-12 -- 1-5221128-1 220187-2 58435-11 220217-2 5227079-7 220187-2 58435-11 220217-2 1-5227079-1 -- 58537-1 -- 5225395-2 69141-1 -- -- 2-5329445-1 O Crimp Nickel Polyethylene Commercial O Crimp Nickel Polyethylene Commercial O Crimp Nickel TEFLON MIL Type Single Crimp Silver TEFLON MIL Type 33.53 1.320 27.69 1.090 27.69 1.090 30.18 1.188 33.33 1.312 Nickel Polyethylene Commercial 33.53 1.320 -- 58436-12 -- 1-5221128-1 Nickel TEFLON MIL Type 34.14 1.344 69477-1 58537-1 69669-1 4-5225395-1 Nickel Polyethylene Commercial 33.33 1.312 -- 58537-1 -- 5-5227079-3 Nickel Polyethylene Commercial 33.53 1.320 -- 58436-12 -- 1-5221128-7 Nickel TEFLON MIL Type 30.94 1.218 -- 258537-1 69669-1 2-5225395-0 Silver Polypropylene MIL Type 41.50 1.634 69652- -- 220000-1 5330878 Silver TEFLON MIL Type 27.31 1.075 47.63 1.875 47.63 1.875 47.63 1.875 52.38 2.062 220015-1 -- -- 5225886-1 220015-1 -- -- 5225886-4 220015-1 -- -- 5225886-7 220015-1 -- -- 220015-1 -- -- 302, BELDEN 88241, 89269, Hex Crimp Hi-Temp 62A, Times PL62, BERK-TEK, BTDC-59, O Crimp BTDC-62 Hi-Temp 59, Times PL59, O Crimp PLF59 (20 AWG C.C.) BELDEN 9104, 9240, Hex Crimp 9112, 9167, 9259, 9266, Times O Crimp FM-59 BELDEN 8281, 9141, 9231, Single Crimp Western Electric 724, 728, 3049 8, 8A, O Crimp 213 11, 11A O Crimp Silver TEFLON MIL Type BELDEN 9914, Times FM-8 Alpha 9847, BELDEN 8213, 9292 9, 9A, 9B, 214 O Crimp Silver TEFLON MIL Type O Crimp Silver TEFLON MIL Type O Crimp Silver TEFLON MIL Type 225886-5 5225886-1 1Order Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1 2Order BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 49 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Twist-On Related Product Data Twist-On plugs must be used with cable that has a solid conductor. These plugs are not recommended for applications where the cable frequently moves or flexes. 38.10 [1.500] 14.53 [.572] Dia. Max. RG/U Cable 59, 59A, 59B Mating Twist-On Jack -- Page 52 Right-Angle Plugs, Crimp Contact Plating Body Plating Dielectric Style Part No. Nickel Polymethylpentene Commercial 5414265-3 Gold Single Crimp Hex and O Crimp 26.57 [1.046] 26.57 [1.046] L Max. L Max. 14.53 [.572] Dia. Max. RG/U Cable 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 180, 180A, 180B, 195, 195A BELDEN 9907, 89907, 8219, COMM/SCOPE 2104, 3104 58, 58A, 58B, 58C 55, 55A, 55B, 223 142, 142A, 142B, 400 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 14.53 [.572] Dia. Max. CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 58436-3 -- 5413959-3 -- 91910-1 69422- 5331178-0 39.45 1.553 -- 58436-3 -- 5413959-4 Commercial 39.45 1.553 -- 58436-3 -- 5413959-5 Polymethylpentene Commercial 39.45 1.553 -- 58436-1 -- 5413959-6 Nickel Polymethylpentene Commercial -- 58436-1 -- 5413959-1 Gold Nickel TEFLON MIL Type 69478-1 220189-3 69727-1 5225974-1 Single Crimp Gold Silver TEFLON MIL Type -- 91904-1 69223-1 5331175-0 O Crimp Gold Nickel TEFLON MIL Type 69478-1 220189-3 69727-1 5225974-2 Single Crimp Gold Silver TEFLON MIL Type -- 91904-3 69429-1 5331182-0 Single Crimp Gold Silver TEFLON MIL Type 39.45 1.553 37.29 1.468 44.45 1.750 37.29 1.468 44.45 1.750 44.45 1.750 69331-1 -- 69429-1 5331182-0 O Crimp Gold Nickel TEFLON MIL Type 37.29 1.468 -- 58537-1 69669-1 5225974-5 Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Hex Crimp Gold Nickel Polymethylpentene Commercial Single Crimp Gold Silver TEFLON MIL Type 39.45 1.553 44.45 1.750 Hex Crimp Gold Nickel Polymethylpentene Commercial Hex Crimp Gold Nickel Polymethylpentene Hex Crimp Gold Nickel Hex Crimp Gold O Crimp BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 50 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Crimp Single Crimp Hex and O Crimp 11.1 [.437] Dia. Max. RG/U Cable 174, 188, 188A, 316 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 58, 58A, 58B, 58C 223, 55, 55A, 55B 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 1Order 11.08 [.436] Dia. Max. L Max. CERTI-CRIMP Hand Tool with Integral Die Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Hex Crimp Gold Nickel Commercial O Crimp Gold Nickel Polymethylpentene Polypropylene Commercial O Crimp Gold Nickel TEFLON MIL Type Single Crimp Gold Silver TEFLON MIL Type 33.02 1.300 30.48 1.200 -30.48 1.200 33.33 1.312 Hex Crimp Gold Nickel Polymethylpentene Commercial -33.02 1.300 -- O Crimp Gold Nickel Polypropylene Commercial O Crimp Gold Nickel TEFLON MIL Type Single Crimp Gold Silver TEFLON MIL Type 30.48 1.200 30.48 1.200 33.33 1.312 O Crimp Gold Nickel Polypropylene Commercial O Crimp Gold Nickel TEFLON MIL Type Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 -- 58436-3 -- L Max. Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 5413779-3 1424050-1 220217-3 5228979-7 -- 1424050-1 220026-1 5225396-7 -- -- 69422- 2-5330062-1 58436-3 -- 2-5413779-4 220187-1 58435-11 220217-1 5228979-5 2-- 91901-1 69727- 5225396-11 69140-2 91904-3 69424- 30.48 1.200 220187-2 58435-11 220217-2 5228979-6 30.48 1.200 -- 58537-1 269669-1 5225396-2 2-5329452-2 Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 51 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Twist-On Related Product Data Twist-on jacks must be used with cable that has a solid conductor. These jacks are not recommended for applications where the cable frequently moves or flexes. 40.14 Max. [1.580] Mating Twist-On Plug -- Page 50 RG/U Cable 59, 59A, 59B Center Contact Gold Body Plating Nickel Dielectric Style Part No. Acetal Commercial 222428-1 Panel Jacks, Crimp 11.2 [.441] Dia. 12.7 0.1 [.500 .004] 17.84 Max. [.702] 12.7 0.1 [.500 .004] 28.96 [1.140] Max. 2.77 Dia. [.109] Recommended Panel Cutout RG/U Cable Termination Type Center Contact Plating 174, 188, 188A, 316 58, 58A, 58B, 58C 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269, 89269 O Crimp O Crimp Gold Gold Nickel Nickel TEFLON TEFLON MIL Type MIL Type -- -69478-1 Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 1424050-1 91901-1 O Crimp Gold Nickel TEFLON MIL Type -69477-1 258537-1 Body Plating Dielectric Style CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 220026-1 69727- 5225397-7 5225397-1 269669-1 5225397-2 Part No. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 52 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp Single Crimp Hex and O Crimp Note: Panel Insulating Bushings -- Page 54 H H L Max. L Max. +0.13 12.83 -0.00 Dia. [.505 +.005 ] 12.82 [.505] Dia. Min. Recommended Panel Cutouts -.000 11.04 [.435] Min. Maximum Panel Thickness 3.18 [.125] +0.08 5.54 -0.00 [.218 +.003 ] -.000 H = 11/16" across flats, 20.32 [.800] Max. across points RG/U Cable 174, 188, 188A, 316 Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Hex Crimp Gold Nickel Commercial O Crimp Gold Nickel Polymethylpentene Polypropylene Commercial O Crimp Gold Nickel TEFLON MIL Type Single Crimp Gold Silver TEFLON MIL Type 36.83 1.450 34.93 1.375 35.71 1.406 32.13 1.265 35.71 1.406 32.13 1.265 35.71 1.406 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 O Crimp Gold Nickel TEFLON MIL Type Single Crimp Gold Silver TEFLON MIL Type Times RD316 O Crimp Gold Nickel TEFLON MIL Type CERTI-CRIMP Hand Tool with Integral Die -- Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 58436-3 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. -- 5413771-3 -- -- 220217-3 5228980-7 -- -- 220026-1 5225398-7 -- -- 69422- -- 1424050-1 220026-1 -- 91910-1 69408- 2-5329458-1 -- 91904-1 69669-2 1-5225398-5 2-5330063-1 5225398-8 BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 53 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Bulkhead Jacks, Crimp (Continued) Single Crimp Hex and O Crimp Note: Panel Insulating Bushings -- at the bottom of this page L Max. H H L Max. +0.13 12.83 -0.00 Dia. [.505 +.005 ] 12.82 [.505] Dia. Min. -.000 Recommended Panel Cutouts 11.04 [.435] Min. Maximum Panel Thickness 3.18 [.125] +0.08 5.54 -0.00 [.218 +.003 ] -.000 H = 11/16" across flats, 20.32 [.800] Max. across points Style Dim. L CERTI-CRIMP Hand Tool with Integral Die Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. Polymethylpentene Commercial 36.83 1.450 -- 58436-1 -- 5413771-1 Nickel Polypropylene Commercial 220187-1 58435-11 220217-1 5228980-5 Gold Nickel TEFLON MIL Type -- 91901-1 69727- 5225398-1 Single Crimp Gold Silver TEFLON MIL Type -- 91904-4 69223-1 2-5329456-1 O Crimp Gold Nickel TEFLON MIL Type -- 91901-1 69727- 5225398-3 O Crimp Gold Nickel TEFLON MIL Type 34.93 1.375 41.28 1.625 32.13 1.265 35.71 1.406 35.71 1.406 -- 91901-1 69727- 5225398-6 O Crimp Gold Nickel Polypropylene Commercial 34.93 1.375 220187-2 58435-11 220217-2 5228980-6 RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric 58, 58A, 58B, 58C, BELDEN 88240, BERK-TEK BTDC-58, COMM/SCOPE 2135 Hex Crimp Gold Nickel O Crimp Gold O Crimp 58, 58A, 58B, 58C 223, 55, 55A, 55B 142, 142A, 142B, 400 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 1Order Tyco Electronics PRO-CRIMPER Coaxial "O" Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. Panel Insulating Bushings for Bulkhead Jacks 0.89 [.035] 12.93 [.509] Dia. 0.81 [.032] 5.46 [.215] 14.730.13 [.580.005] Dia. 13.95 [.549] Dia. Material -- Nylon 14.10.08 [.555.003] Note: Can not be used with single crimp bulkhead jacks. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. TEFLON is a trademark of E.I. Dupont de Nemours and Company. 17.45 [.687] Dia. 14.58 Dia. [.574] Recommended Panel Cutout Part No. 330620 (2 Required) Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 54 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, for JIS Cables, Crimp Plating Body -- Nickel Center Contact -- Gold 14.53 [.572] Dia. Max. Bulkhead Solder Jacks, Front Mount JIS Cable Termination Type 3D-2V Hex Crimp L Max. Dielectric Dim. L Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. Polyethylene 33.53 1.320 58436-1 3-5221128-1 Without Solder Terminal With Solder Terminal Body Plating -- Nickel 22.23 [.875] 9.65/9.75 [.380/.384] Dia. Accepts 1.5 [.059] Dia. Max. Wire 3/8" - 32 Thread Accepts 1.5 [.059] Dia. Max. Wire 3/8" - 32 Thread .396/4.04 [.156/.159] Recommended Panel Cutout L Max. W Dia. Max. Contact Material Dielectric Silver VALOX VALOX Gold TEFLON Tin TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company. VALOX Dimensions L W 26.93 1.060 33.33 1.312 26.93 1.060 33.33 1.312 26.93 1.060 33.33 1.312 26.93 1.060 L Max. W Dia. Max. 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 13.09 .515 Panel Thickness Insulating Bushing 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 1.17-6.35 .046-.250 1.17-3.18 .046-.125 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 227223-1 or 221951-1 Part No. Without Solder With Solder Terminal* Terminal** 5227754-3 5227755-3 -- 5227169-7 5227754-2 5227755-2 5227169-4 5227169-8 5227715-3 5227716-3 -- 5227169-5 5227754-1 5227755-1 **Includes lockwasher and jam nut. **Includes solder terminal and jam nut. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 55 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Insulating Bushings 1.09 Max. [.043] 11.43 [.450] 4.04 Max. [.159] 0.94 [.030] Max. 1.78 [.070] 10.93 Dia. [.430] 14.86 Dia. [.585] 3.94 Dia. [.155] 12.7 [.500] Dia. 0.81 [.032] 11.94 [.470] 9.53 Dia. [.375] 15.88 Dia. [.625] 9.53 [.375] Part No. 227223-1 Part No. 221951-1 11.56 0.08 [.455 .003] Dia. 12.83 0.08 [.505 .003] Dia. 10.97 0.06 [.432 .003] 12.070.08 [.475 .003] Recommended Panel Cutout Recommended Panel Cutout 3/8" - 24 Thread Isolated Bulkhead Solder Jacks, Front Mount Accepts 1.5 [.059] DIa. Max. Wire Plating Body -- Nickel Dielectric -- White VALOX Center Contact Plating Tin Silver Gold Flange & Thread Material VALOX VALOX VALOX Part No. 5227726-1 5227726-2 5227726-3 +0.13 9.91 -0.20 Dia. [.390 +.005 ] -.000 3.89 [.153 31.75 Max. [1.250] 13.09 Dia. [.515] Max. +0.08 -0.00 +.003 ] -.000 Panel Thickness 1.17-6.35 [.046-.250] Recommended Panel Cutout 3/8" - 24 Thread +0.08 Plating Body -- Nickel Center Contact -- Silver Dielectric -- Black VALOX Flange & Thread Material -- Black VALOX 9.60 -0.00 Dia. [.378 +.003 ] -.000 12.83 [.505] Max. 3.94 [.155 26.80 [1.055] Max. Panel Thickness 1.17-3.18 [.046-.125] Recommended Panel Cutout Part No. 5414194-1 Sealed Bulkhead Solder Jack, Rear Mount Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene This connector is designed to prevent moisture from entering the interface from the rear of the connector. VALOX is a trademark of General Electric Company. +0.08 -0.00 +.003 ] -.000 Rubber Gasket +0.13 17.78 Dia. [.700] Max. 1/2" - 28 Thread 12.83 -0.00 Dia. [.505 +.005 ] -.000 Accepts . 1.5 [.059] DIa. Max. Wire +0.08 5.54 -0.00 [.218 +.003 ] 31.75 [1.250] Max. -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Part No. 5227426-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 56 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right-Angle Jacks PC Board/Panel Mount VALOX Body Metal Body 1/2-28 Thread 1/2-28 Thread C Mtg. Hgt. Body -- Nickel Dielectric -- Polymethylpentene C L A C Mtg. Hgt. C L B A B 34.93 [1.375] 34.93 [1.375] Mounting Post Style Body Material Center Contact Plating Dimensions Tin L VALOX, White Gold1 Gold1 Tin Compliant Post VALOX, Black Gold1 Gold1 Gold1 E L Tin Gold1 Metal Gold1 +0.13 12.83 -0.00 Dia. [.505 +.005 ] Gold2 -.000 High Temp. Housing +0.08 5.54 -0.00 Dia. [.218 +.003 ] Gold1 A B C 8.59 .338 8.59 .338 6.91 .272 8.59 .338 8.59 .338 6.91 .272 6.17 .243 8.26 .325 8.26 .325 6.91 .272 6.91 .272 6.91 .272 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 21.21 .835 15.88 .625 15.88 .625 13.18 .519 15.88 .625 15.88 .625 13.18 .519 11.68 .460 15.88 .625 15.88 .625 12.70 .500 12.70 .500 13.18 .519 Part No. Without With L Mounting Posts Mounting Posts 3.48 5226990-1 5227161-1 .137 3.48 5226990-3 5227161-3 .137 3.48 -- 5227161-7 .137 3.48 -- 5227161-2 .137 3.48 5226990-6 5227161-6 .137 3.48 -- 5227161-9 .137 -- With Compliant Posts L -- -- -- -- -- -- -- -- -- -- -- -- 5415046-1 -- -- -- -- 5227661-1 -- -- 5227676-1 5227677-1 -- -- 1274668-1 5413879-1 -- -- -- 5413879-2 3.48 .137 3.48 .137 3.48 .137 3.48 .137 -- -- -- -- -- 5415218-5 2.79 .110 Plating: Gold1 -- 0.00076 [.000030] thick Gold2 -- 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Lockwasher and Jam Nut Without Mounting Posts 10.16 0.08 [.400 .003] With Mounting Posts 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 0.05 [.200 .002] 5.08 0.05 [.200 .002] G Part No. 1-329632-2 Part No. 1-329631-2 2.54 0.05 [.100 .002] S 10.16 0.08 [.400 .003] 5.08 0.05 [.200 .002] 5.08 0.05 Mating [.200 .002] Face Mating Face G 0.89 0.08 [.035 .003] 2.54 0.05 [.100 .002] (Top View) 2.01 0.05 [.079 .002] (2 Holes) S 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layouts VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 57 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Jacks PC Board/Panel Mount Plating Body -- Nickel Dielectric -- Polymethylpentene VALOX Body Metal Body L L 1/2-28 Thread 15.88 [.625] B +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 Body Material +0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000 Maximum Panel Thickness 6.1 [.240] VALOX, White Recommended Panel Cutout VALOX, Black 15.88 [.625] B 34.93 [1.375] Mtg. Hgt. Center Contact Plating Dim. B Dim. L Tin 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 Gold Tin Gold Tin Lockwasher and Jam Nut 1/2-28 Thread Metal Gold 34.93 [1.375] Mtg. Hgt. Part No. Without With Mounting Mounting Posts Posts 5226993-1 5227222-1 5226993-3 5227222-3 5226993-2 5227222-2 5226993-6 5227222-6 -- 5227671-1 -- 5227673-1 Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Part No. 1-329632-2 Part No. 1-329631-2 Without Mounting Posts 5.08 [.200 With Mounting Posts 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 0.05 .002] 5.08 0.05 [.200 .002] 2.54 0.05 [.100 .002] 10.16 0.08 [.400 .003] G S 10.16 0.08 [.400 .003] 0.89 0.08 [.035 .003] 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] 2.54 0.05 [.100 .002] 10.16 0.08 [.400 .003] G S 10.16 0.08 [.400 .003] (Top View) 5.08 0.05 [.200 .002] 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layouts * Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2. Screw for thickness of less than 2.38 [.093] Part No. 221108-4. VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 58 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks with Mounting Flanges PC Board/Panel Mount 1/2-28 Thread 15.88 [.625] Mounting Height +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 C L 8.59 [.338] 21.21 [.835] 34.93 [1.375] +0.08 5.54 -0.00 Dia. [.218 +.003 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Body Material Center Contact Plating Tin Gold VALOX, White Part No. 5226978-1 5226978-3 Lockwasher and Jam Nut 3.3 [.130] Dia. Clearance Hole for 5-40 Screw 22.86 0.08 [.900 .003] 8.89 [.350] Part No. 1-329632-2 11.43 [.450] Part No. 1-329631-2 G S Mating Face 2.54 [.100] 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layout VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 59 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Body Plating Recommended PC Board Layouts Style A Center Contact Plating Dielectric Style Silver VALOX A Gold VALOX A Tin VALOX A Gold VALOX A Silver VALOX C Gold VALOX E Gold TEFLON B Silver VALOX C Gold VALOX D L 12.7 0.08 [.500 .003] 6.35 0.05 [.250 .002] Nickel 12.7 0.08 [.500 .003] 17.45 Sq. [.687] 15.88 [.625] Drill Holes for 0.94 0.05 [.037 .002] Dia. Pin (5 Places) 6.35 0.05 [.250 .002] Tin-Lead 1With Style B L Leg Length L 6.35 .250 6.35 .250 6.35 .250 3.81 .150 4.45 .175 6.35 .250 3.30 .130 3.18 .125 3.43 .135 Part No. 5227699-1 5227699-2 5227699-3 5414460-11 5222420-1 5415189-1 5413969-2 5414305-1 5221123-2 .76 [.030] standoffs on top of legs. 6.88 0.08 [.271 .003] 1.50 0.08 Dia. [.059 .003] (4 Holes) 3.44 0.08 [.135 .003] 6.88 0.08 [.271 .003] 20.57 [.810] 1.02 0.08 Dia. [.040 .003] Style C 3.43 0.08 [.135 .003] Style D 6.88 0.05 [.271 .003] L 2.44 0.08 Dia. [.096 .003] (4 Holes) 3.43 0.05 [.135 .002] 6.88 0.05 [.271 .003] 4.32 [.170] 1.73 0.05 Dia. [.068 .002] 6.48 [.255] 1.32 0.08 Dia. [.052 .003] 3.73 [.147] 15.88 [.625] 16.64 [.655] 1.07 0.05 Dia. [.042 .002] L 7.47 [.294] Style E (Panel Mount) 12.70 0.08 [.500 .003] 6.35 0.06 [.250 .002] Drill Hole to Receive 0.940.06 [.037.002] Dia. Pin, 5 Required 20.78 0.38 [.818 .015] TEFLON is a trademark of E.I. Dupont de Nemours and Company. VALOX is a trademark of General Electric Company. L 12.70 0.08 [.500 .003] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 60 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks, PC Board Mount 7.50 0.08 [.295 .003] Signal Contact Hole 1.00 0.08 [.039 .003] 2 Plcs. 24.00 [.945] Switching Contact 1.70 0.10 Hole [.067 .004] 2.50 0.08 [.098 .003] 4 Plcs. 10.72 0.25 [.422 .010] 3.00 0.10 [.118 .004] 1.50 0.08 [.059 .003] 2 Plcs. 10.70 0.08 [.421 .003] Recommended PC Board Layout Part No. 1274314-1 (Switching) 3.75 0.08 [.148 .003] 1.00 0.08 [.039 .003] 24.00 [.945] 1.70 0.10 [.067 .004] 2.50 0.08 [.098 .003] 3 Plcs. 3.00 0.10 [.118 .004] 1.50 0.08 [.059 .003] 2 Plcs. 10.72 0.25 [.422 .010] 10.70 0.08 [.421 .003] Part No. 1274315-1 Body Plating Tin Tin Recommended PC Board Layout Contact Plating Silver Silver Dielectric Polyphenylene Polyphenylene Press Fit Vertical Metalized Jack, PC Board Mount Part No. 6274314-1 6274315-1 Insulating Bushing 6.88 0.05 [.271 .002] 11.94 Dia. [.470] Max. +0.08 1.5 -0.10 [.059 +.003 ] -.004 Dia. 4 Holes 3.43 0.05 [.135 .002] 6.88 0.05 [.271 .002] 20.57 [.810] Max. 1.02 0.08 Dia. [.040 .003] Material -- Polypropylene Part No. 222163-1 Only to be used on Part Nos. 5222006-1 & 5222462-1 14.61 Dia. [.575] Recommended PC Board Layout PC Board Thickness Not Less Than 0.99 [.093] 11.94 [.470] Dia. 2.96 [.115] Max. 6.61 [.260] Max. Part No. 5222006-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 61 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right-Angle Metalized Jacks, PC Board Mount 6.6 0.08 [.260 .003] 10.97 [.432] Mounting Height 3.3 0.08 [.130 .003] C L 0.08 .003] 2.11 [.083 Dia. (4 holes) 6.6 0.08 [.260 .003] 6.15 [.242] 1.17 0.08 Dia. [.046 .003] 27.64 0.51 [1.088 .020] Body Plating Dielectric Nickel Polymethylpentene Tin TEFLON Nickel Polymethylpentene Center Contact Length 4.34 .171 4.34 .171 3.33 .131 Part No. 5413631-1* 5413631-2* 5413631-3* Maximum PC Board Thickness 2.54 [.100] Recommended PC Board Layout 1.19 0.18 Dia. [.047 .007] 3.81 0.08 [.150 .003] 8.64 [.340] 7.62 0.08 [.300 .003] 21.85 [.860] 25.40 [ 1.000] 7.62 0.08 [.300 .003] Body Dielectric Contact Nickel TPX Gold Part No. 5414373-1 1.78 0.08 Dia. [.070 .003] 2 Holes Recommended PC Board Layouts 6.6 0.08 [.260 .003] Right-Angle Metalized Jacks, PC Board/Panel Mount 3.3 0.08 [.130 .003] 27.64 0.51 [1.088 .020] 6.15 0.25 [.242 .010] 11.66 [.459] 2.11 0.08 Dia. [.083 .003] 4 holes 6.6 0.08 [.260 .003] 10.97 0.18 [.432 .007] 1.17 0.08 Dia. [.046 .003] Body Plating Tin Tin Dielectric TEFLON TPX Part No. 5415025-2 5415025-1 +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 1/2-28 Thread 4.34 [.171] +0.08 5.64 -0.00 Dia. [.222 +.003 ] Lockwasher and Jam Nut see page 59. -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 62 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Tee Adapters Style A Style B Style C (Jack-Plug-Jack) With Insulated Cover (Jack-Plug-Jack) (Jack-Jack-Jack) D D Insulation Material Polyphenylene oxide D F E E E F Style Body Material and Plating Brass, Nickel A B C Center Contact Material and Plating BE CU, Gold (30)2 PH BR, Gold (15)2 BE CU, Gold (30)2 PH BR, Gold (15)2 BE CU, Silver (200)2 BE CU, Gold (30)2 BE CU, Silver (200)2 PH BR, Gold (50)2 Zinc, Nickel Zinc, Nickel Brass, Nickel Zinc, Nickel Dielectric TEFLON Acetal Acetal Acetal Acetal Acetal TEFLON Acetal D 32.54 1.281 33.02 1.300 33.02 1.300 33.02 1.300 33.02 1.300 32.54 1.281 32.54 1.281 32.54 1.281 Dimensions E 26.19 1.031 27.31 1.075 27.31 1.075 27.31 1.075 27.31 1.075 31.12 1.225 23.37 .920 23.62 .930 Comparable UG/U Connector F 14.27 .562 14.50 .571 14.50 .571 14.50 .571 14.50 .571 17.15 .675 274A -- -- -- -- 1 -- -- -- -- -- Packaging No. Per Pkg. Bulk (100) Bulk (100) Bulk (100) Individual (1) 3 Individual (1) Bulk (100) Bulk (100) Bulk (100) Part No. 221543-2 5413592-2 5413592-6 5413592-9 1-5413592-1 5413366-21 221988-1 5414311-1 Gray insulation cover (Microinches min thickness) (Special graphics) 1 2 3 Tee Adapter Covers 114.55 0.76 [4.510 .030] Material -- Polypropylene, general purpose Color Part No. Black 221586-1 Ivory 221586-3 15.11 [.595] Dia. TEFLON is a trademark of E.I. Dupont de Nemours and Company. 5.08 Dia. [.200] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 63 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jack-Jack Adapters Style B Style A Nickel Nickel Center Contact Plating Silver Gold Nickel Gold Body Plating 35.81 [1.410] 32.54 [1.281] Bulkhead Jack-Jack Adapters +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 L Max. H Max. Body Plating Center Contact Plating Nickel Silver Nickel Gold1 Nickel Gold2 Dielectric Style Part No. TEFLON TEFLON Polymethylpentene A A 221551-1 221551-3 B 5414414-1 Dimensions H L 17.45 .687 17.78 .700 17.78 .700 38.10 1.500 36.07 1.420 36.07 1.420 Dielectric Part No. TEFLON 330024- Polyethylene Polyethylene 5228226-1 5228226-3 Plating: Gold1 -- 0.00127 [.000050] thick Gold2 -- 0.00076 [.000015] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. +0.06 5.54 -0.00 [.218 +.003 ] -.000 Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. Isolated Bulkhead Jack-Jack Adapter Body Plating Nickel Center Contact Plating Gold +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 Dielectric Part No. Polymethylpentene 5414105-1 +0.06 5.54 -0.00 Dia. [.218 +.003 ] 36.07 [1.420] 15.87 [.625] -.000 Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. Plug-Plug Adapter 31.8 Ref. [1.252] Right-Angle Adapters Nickel Nickel Nickel Center Contact Plating Silver Gold Gold Body Plating Nickel Part No. 415796-1 14.53 Dia [.572] Max. (Jack-Plug) Body Plating Contact Plating Gold Dielectric Part No. TEFLON TEFLON Polymethylpentene 5329517-1 5222165-2 5414666-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. 22.89 [.901] Max. 26.97 [1.062] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 64 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Terminator Plugs 50, 75, 93 Ohm Resistor Specification Tether Plating 1 Watt, 50 Ohm 1 Watt, 75 Ohm 1 Watt, 93 Ohm 0.5 Watt, 75 Ohm 1 Watt, 50 Ohm Body -- Nickel Center Contact -- Gold Dielectric -- Polyethylene 14.53 Dia. [.572] Max. 33.02 [1.300] 1 Part No. With Tether Without Tether 5221629-11 5221629-4 5221629-21 5221629-5 -- 5221629-6 -- -- 1-5221629-61 -- Tether is conductive with #4 stud size #6 Stud Size Insulated Terminators Long Cover Insulation Material Polyphenylene oxide 38.10 Max. [1.500] 38.10 Max. [1.500] 17.40 [.685] 17.40 [.685] Register Specification 1 Watt, 50 Ohm Color Gray Black Cover Style Long Short Long Short Cover* Part No. 5413557-1 5413364-2 5413557-2 * The Short Cover is required when mating the Terminator with a Tee Adapter. Jack Covers Shorting Caps 22.10 Max. [.870] 14.53 Dia. [.572] Max. Body Plating Silver Nickel Plating Body -- Nickel Center Contact -- Gold Part No. 330022 1-330022-2 15.24 [.600] 101.6 [4.000] 14.53 [.572] Dia. Max. #6 Stud Size Part No. 413453-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 65 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm Plugs, Crimp Hex and O Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die tooling listed below is different from the equivalent 50 ohm connectors. 14.53 [.572] Dia. Max. L Max. Plugs Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 58425-2 -- 5413589-8 318451-2 -- 5221185-8 58425-2 -- 1-5413589-0 58174-1 58248-3 1-5221185-8 58425-2 -- 5413589-3 58174-1 58248-3 5221185-3 58425-1 -- 5413589-2 58536-1 58248-2 5221185-2 RG/U Cable Termination Type Center Contact Plating 179, 179A, 179B, 187, 187A, 161, BELDEN 9221 Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 35.56 1.140 29.46 1.160 27.69 1.090 29.46 1.160 27.69 1.090 29.46 1.160 27.69 1.090 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 58425-1 -- 5413589-1 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 58425-1 -- 5413589-9 O Crimp Gold Nickel Polyethelene Commercial 27.69 1.090 58536-1 58248-2 5221185-9 Hex Crimp Gold Nickel Polyethelene Commercial 58425-1 -- 5413589-7 58536-1 -- 1-5221185-0 58536-1 -- 5221185-1 58538-1 58248-1 5221185-7 Body Plating Dielectric Style Dim. L AT&T 735A BELDEN 8218 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 302, BELDEN 89269, 88241, Hi-Temp 62A, Times PL-62, Berk Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9167, 9240, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.) Part No. O Crimp Gold Nickel Polyethelene Commercial BELDEN 9248, 9114 O Crimp Gold Nickel Polyethelene Commercial 6, 6A O Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 27.69 1.090 25.65 1.010 37.85 1.490 Hex Crimp Gold Nickel Polyethelene Commercial 29.46 1.160 58425-3 -- 5413589-5 O Crimp Gold Nickel Polyethelene Commercial 28.45 1.120 58538-1 58248-1 5221185-5 28.96 1.140 28.96 1.140 58536-1 -- 2-5221185-9 58536-1 -- 3-5221185-1 BELDEN 9145, AT&T 734A BELDEN 8281, 9141, 9231, Western Electric 724, 728, 3049 COMM/SCOPE S59 Hec COMM/SCOPE F59 Hec-z O Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 66 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Plugs for JIS Cables, Crimp Plating Body -- Nickel Center Contact -- Gold 14.53 [.572] Dia. Max. L Max. JIS Cable Termination Type Dielectric 3C-2V Hex Crimp Polymethylpentene 2.5C-2V Hex Crimp Polymethylpentene Dim. L Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. 58425-1 1-5413589-1 58425-2 1-5413589-6 Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Part No. 58425-2 5413590-4* 29.46 1.160 29.46 1.160 Bulkhead Jacks for JIS Cables, Crimp Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene 20.32 [.800] Max. L Max. JIS Cable Termination Type Dielectric Dim. L 1.5C-2V Hex Crimp 75 36.83 1.450 *Packaged in 100 pieces per bag. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 67 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Right-Angle Plugs, Crimp Hex and O Crimp 27.18 Max. [1.070] L Max. 14.53 Dia. [.572] Max. RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 179, 179A, 179B, 187, 187A, 161 BELDEN 9221 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 58425-2 -- -5413588-8 AT&T 735A Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 58425-2 -- 1-5413588-0 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 58425-2 -- 5413588-4 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 11.553 58425-1 -- 5413588-2 O Crimp Gold Nickel Polymethylpentene Commercial 39.88 1.570 58536-1 58248-2 -5221402-2 Hex Crimp Gold Nickel Polymethylpentene Commercial 39.45 1.553 58425-1 -- 5413588-9 O Crimp Gold Nickel Polymethylpentene Commercial 39.88 1.570 58536-1 -- 5221402-4 AT&T KS 19224 L2, RD179 Double Braid 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.) BELDEN 9145, AT&T 734A Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 Part No. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 68 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Jacks, Crimp Hex and O Crimp 11.08 Dia. [.436] Max. L Max. Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 58425-2 -- 5413760-8 318451-2 -- 5221199-5 58425-2 -- 5413760-3 RG/U Cable Termination Type Center Contact Plating 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 Hex Crimp Gold Nickel Polyethelene Commercial O Crimp Gold Nickel Polyethelene Commercial BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 1.300 30.48 1.200 33.02 1.300 O Crimp Gold Nickel Polyethelene Commercial 30.48 1.200 58536-1 58248-2 5221199-2 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 1.300 58425-1 -- 5413760-1 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 1.300 58425-1 -- 5413760-9 O Crimp Gold Nickel Polyethelene Commercial 30.48 1.200 58536-1 -- 5221199-1 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 302, BELDEN 88241, 89269, Hi-Temp 62A, Times PL-62, Berk Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59, (RG 59 Type with 20 AWG C.C.) BELDEN 9248, 9114 Body Plating Dielectric Style Dim. L Part No. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 69 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Jacks, Crimp Hex and O Crimp +0.13 12.83 -0.20 Dia. [.505 +.005 ] -.000 +0.08 5.54 -0.00 [.218 +.003 ] 34.93 Max. [1.375] 20.32 [.800] Max. -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Interchangeable Dies for PRO-CRIMPER Hand Tool 354940-1 or PRO-CRIMPER Adapter 679304-1 Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style Dim. L 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 -- 5413590-8 O Crimp Gold Nickel Polyethelene Commercial 36.83 1.450 34.93 1.375 318451-2 -- 5221221-5 AT&T KS 19224 L2, RD179 Double Braid Hex Crimp Gold Nickel Polyethelene Commercial 36.83 1.450 58425-2 -- 5413590-4 BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 36.83 1.450 58425-2 -- 5413590-3 O Crimp Gold Nickel Polyethelene Commercial 34.93 1.375 58536-1 58248-2 5221221-2 O Crimp Gold Nickel Polyethelene Commercial 34.93 1.375 58536-1 58248-2 5221221-7 O Crimp Gold Nickel Polyethelene Commercial 34.93 1.375 58536-1 -- 5221221-1 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Times FM-59 (RG 59 Type with 20 AWG C.C.) BELDEN 9114, 9248 Part No. AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 70 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Solder Jacks Front Mount Accepts .054 Dia. Max. Wire 27.43 Max. [1.083] Plating 27.43 [ 1.083] Accepts .054 Dia. Max. Wire Max. Body -- Nickel Center Contact -- Silver 3/8-32 Thread 3/8-32 Thread 9.75/9.65 [.384./380] Dia. 13.09 Dia. [.515] Max. 13.09 Dia. [.515] Max. Part No. 5415187-1 Part No. 5221244-1 (without Solder Terminal) (with Solder Terminal) Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). Note: If insulating bushing required use part no. 227223-1 or 221951-1 (for details, reference page 55). 4.04/3.96 [.159/.156] Maximum Panel Thickness 3.18 [.125] Recommended Panel Cutout Bulkhead Jack PC Board Mount 3.30 [.130] O 12.70 0.1 [.500 .004] 11.07 Max. [.436] 20.8 [.820] 11.2 0.1 [.441 .004] Part No. 6274086-1 Bulkhead Solder Jack Rear Mount Accepts . .050 Dia. Max. WIre Lockwasher and Jam Nut see page 73. 17.78 Dia. [.700] Max. 1/2-28 Thread +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene +0.08 5.54 -0.00 [.218 +.003 ] 31.75 Max. [ 1.250] -.000 Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Part No. 5414217-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 71 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Right-Angle Jacks PC Board/Panel Mount VALOX Body Metal Body 1/2-28 Threads 1/2-28 Threads C Mtg. Hgt. C Mtg. Hgt. Outer Shell -- Nickel Dielectric -- Polymethylpentene Lockwasher and Jam Nut see page 73. C L C L A B +0.13 12.83 -0.00 Dia. [.505 +.005 ] Body Material -.000 L +0.13 5.54 -0.00 [.218 +.005 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Recommended PC Board Layouts Without Mounting Posts 10.16 0.08 [.400 .003] 2.64 [.104] Dia. Clearance Hole for 2-56 Self-Tapping Screw* (2 Holes) 5.08 0.05 [.200 .002] 5.08 0.05 [.200 .002] G 2.54 0.05 [.100 .002] S Mating Face 0.89 0.08 [.035 .003] (Top View) With Mounting Posts 10.16 0.08 [.400 .003] 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] 5.08 0.05 Mating [.200 .002] Face G 2.54 [.100 0.05 .002] S 0.89 0.08 [.035 .003] (Top View) A B 34.93 [1.375] VALOX, Black w/ Compliant Posts (Economy)* VALOX, Black (Economy)* VALOX, White VALOX, White (Economy)* VALOX, Black Part No. Without With Mounting Posts Mounting Posts * -- 5415105-2 Center Contact Plating A Gold3 6.17 .243 21.21 .835 11.68 .460 2.79 .110 Gold3 6.17 .243 21.21 .835 11.68 .460 4.01 .158 * -- 5415105-1 Gold1 6.91 .272 21.21 .835 13.88 .519 3.48 .137 -- 5413194-1 5415634-2 Dimensions B C L Gold1 6.91 .272 21.21 .835 13.88 .519 3.48 .137 * -- Gold1 6.91 .272 6.91 .272 8.59 .338 8.59 .338 8.25 .325 8.25 .325 8.25 .325 6.91 .272 8.56 .337 8.25 .325 6.91 .272 6.91 .272 6.91 .272 21.21 .835 21.21 .835 21.21 .835 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 21.21 .835 20.83 .820 20.83 .820 20.83 .820 20.83 .820 13.88 .519 13.88 .519 15.88 .625 15.88 .625 15.88 .625 15.88 .625 15.88 .625 12.70 .500 15.88 .625 15.88 .625 12.70 .500 12.70 .500 12.70 .500 3.48 .137 3.48 .137 3.48 .137 3.48 .137 2.16 .085 -- 5413194-2 -- 5415634-1 -- 5415633-1 -- 5414459-1 -- 5222092-1 -- 5222093-1 -- 3.48 .137 3.48 .137 3.48 .137 3.48 .137 3.48 .137 -- 5414409-1 -- 5415417-1 -- 5415419-1 -- 5222092-3 -- 5414907-1 -- 6274072-1 -- 3.48 .137 -- 6274084-1 Gold1 VALOX, Black (Economy)* Gold1 VALOX, White Gold2 Metal Gold1 Metal Gold1 Metal (Economy)* Gold1 Metal with Compliant Posts (Economy)* Gold1 Metal Gold1 Metal Gold1 Metal Gold1 Metal (Economy)* 34.93 [1.375] Tin Gold1 **Economy connector uses 50 part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 , screw machined Beryllium Copper). Plating: Gold1 -- 0.00076 [.000030] thick Gold2 -- 0.00127 [.000050] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 72 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Vertical Jacks PC Board/Panel Mount VALOX Body Metal Body L Plating L 1/2-28 Thread 1/2-28 Thread 15.88 [.625] Outer Shell -- Nickel Dielectric -- Polymethylpentene B 15.88 [.625] B 34.93 [1.375] Mtg. Hgt. 34.93 [1.375] Mtg. Hgt. +0.13 12.83 -0.00 Dia. [.505 +.005 ] -.000 5.54 [.218 +0.13 -0.00 +.005 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Contact Plating Dim. B Dim. L Part No. Gold1 21.21 .835 3.48 .137 5415632-1 Gold1 21.21 .835 3.48 .137 5415632-2 Metal Gold1 Tin 3.48 .137 3.48 .137 5222132-1 Metal (Economy)* 20.83 .820 21.21 .835 5415520-1 *Economy connector uses 50 part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 , screw machined Beryllium Copper). Plating: Gold1 -- 0.00076 [.000030] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Lockwasher and Jam Nut Part No. 1-329632-2 Body Material VALOX, Black (Economy)* VALOX, White (Economy)* Part No. 1-329631-2 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. 2.54 0.05 [.100 .002] 10.16 0.08 [.400 .003] G S 10.16 0.08 [.400 .003] 5.08 0.05 [.200 .002] 0.89 0.08 [.035 .003] (Top View) Recommended PC Board Layout VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 73 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Style A Style B Style C L L L Plating Dielectric -- TEFLON 17.45 Sq. [.687] 20.57 [.810] 16.64 [.655] 15.88 [.625] 6.88 0.08 [.271 .003] 12.7 0.08 [.500 .003] 6.35 0.05 [.250 .002] 3.44 0.08 [.135 .003] 1.50 0.08 [.059 .003] Dia. (4 Holes) 6.35 0.05 [.250 .002] 1.02 0.08 [.040 .003] Dia. 5.16 0.08 [.203 .003] 1.02 0.08 Dia. [.040 .003] 14.73 [.580] 5.16 0.08 [.203 .003] 2.54 5 Plcs. [.100] Press Fit Vertical Metalized Jacks PC Board Mount 2.44 0.08 Dia. [.096 .003] (4 Holes) 1.32 0.08 Dia. [.052 .003] 3.43 0.08 [.135 .003] Recommended PC Board Layout Style F (Push-On) 2.578 0.076 [.1015 .0030] 3.43 0.05 [.135 .002] 6.88 0.05 6.88 0.08 [.271 .003] [.271 .003] 12.7 0.08 [.500 .003] Drill Holes for 0.94 0.05 [.037 .002 ] Dia. Pin (5 Places) 6.88 0.05 [.271 .003] 2.06 0.05 Dia. [.081 .002] 4 Plcs. 11.49 Dia. [.470] Max. Body Plating Center Contact Plating Style Nickel Gold B Tin Gold B Tin Gold B Tin Gold C Nickel Silver A Tin Gold F Leg Length L 3.30 .130 3.30 .130 6.35 .250 4.44 .175 6.35 .250 2.54 .100 Part No. 6274291-2 6274291-1 6274359-1 5414394-1 5413986-1 6274360-1 6.88 0.1 [.271 +.003] -.004 3.43 [.135 6.88 [.271 0.05 .002] 1.5 0.1 Dia. [.059 +.004] -.003 (4 Plated-Thru Holes) 0.05 .002] 1.02 0.08 Dia. [.040 .003] (Plated-Thru Hole) A Max. Dim. A 20.57 .810 16.26 .640 Part No. 5222462-1 5414088-1 Recommended PC Board Layout Insulating Bushing Material -- Nylon Part No. 222163-1 Only to be used on Part Nos. 5222462-1 and 5222006-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. 14.61 Dia. [.575] 11.94 [.470] Dia. 2.96 Max. [.115] 6.61 Max. [.260] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 74 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Press Fit Vertical Metalized Jacks PC Board Mount 1.7 0.05 Dia. [.067 .002] (2 Places) For Drive Screw 17.48 Sq. [.688] (Continued) 12.7 0.05 [.500 .002] PC Board Thickness (Min.) 2.36 .093 3.17 .125 6.35 0.05 [.250 .002] 0.08 .003] 1.02 [.040 (Plated-Thru Hole 3 Places) Part No. 5221336-3 5221336-4 12.7 0.05 [.500 .002] 15.88 Max. [.625] 6.35 0.05 [.250 .002] Recommended PC Board Layout Press Fit, Bulkhead Vertical Metalized Jack 6.88 [.271] 4.37 0.51 [.172 .020] 5 Plcs. 10.80 [.425] includes hardware 3.43 [.135] 3.43 [.135] o 12.83 + 0.13 - 0.00 [o .505 + .005] - .000 28.78 [1.133] 24.41 [.961] 6.88 [.271] 5.54 + 0.08 - 0.00 [.218 + .003] - .000 O 1.02 0.08 [.040 .003] Holes Plated Through 5 Plcs. Part No. 6274124-2 Recommended PC Board Layout Right-Angle Metalized Jacks PC Board Mount 10.97 [.432] Mounting Height C L 6.15 [.242] 28.4 Max. [1.118] 6.6 0.08 [.260 .003] 3.3 0.08 [.130 .003] 6.6 0.08 [.260 .003] 2.11 0.08 [.083 .003] Dia. (4 holes) Body Plating Dielectric Contact Plating Nickel Tin Nickel Nickel TPX TEFLON TPX TPX Gold2 Gold2 Gold2 Gold1 Center Contact Dimension .171 [.007] .171 [.007] .131 [.005] .171 [.007] Part No. 5413558-1 5413558-2 5413558-3 5413558-5 Gold1 -- 0.00076 [.000030] thick Gold2 -- 0.00127 [.000050] thick 1.17 0.08 Dia. [.046 .003] Maximum PC Board Thickness 2.54 [.100] Recommended PC Board Layout 11.43 0.43 [.450 .017] 3.81 0.08 [.150 .003] 11.07 Max. [.436] 17.78 [.700] TEFLON is a trademark of E.I. Dupont de Nemours and Company. TPX is a trademark of Mitsui Chemicals America, Inc. 7.62 0.08 [.300 .003] 21.84 [.860] 25.40 0.38 [1.000 .015] 1.19 0.18 Dia. [.047 .007] 7.62 0.08 [.300 .003] 1.78 0.08 Dia. [.070 .003] Part No. 6274127-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 75 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) 27.64 0.51 [1.088 .020] Right-Angle Metalized Jacks PC Board/Panel Mount 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 6.15 0.25 [.242 .010] 11.66 [.459] 10.97 0.18 [.432 .007] 5.64+0.08 -0.00 [.222+.003] -.000 1/2-28 Thread 4.34 [.171] Body Plating Tin Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Dielectric Part No. TEFLON 6274425-2 Bulkhead Jack-Jack Adapter Right-Angle Adapter Plating Plating Body -- Nickel Center Contact --Gold Dielectric -- Polymethylpentene Body -- Nickel Center Contact --Gold Dielectric -- Polymethylpentene (Jack-Plug) 12.83+0.13 -0.00 [.505+.005] -.000 14.53 Dia. [.572] Max. Dia. 22.89 [.901] Max. 5.54+0.08 -0.00 [.218+.003] -.000 36.07 [1.420] 11/16 26.97 [1.062] Maximum Panel Thickness 6.35 [.250] Part No. 5222117-1 Recommended Panel Cutout Bulkhead Jack-Jack Adapter Part No. 5415020-1 Jack-Jack Adapter Plating Plating Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene Body -- Nickel Center Contact -- Gold Dielectric -- Polymethylpentene 36.04 Max. [1.419] 12.83+0.13 36.07 Max. [1.420] -0.00 [.505+.005] -.000 Dia. O 15.88 0.25 [.625 .010] 5.54+0.08 -0.00 Recommended Panel Cutout [.218+.003] -.000 Part No. 415567-1 Part No. 1274935-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 76 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Jack-Push On Plug Adapter 0.13 O 9.65 +- 0.00 + .005 [.380 - .000 ] O 8.43 Max. [.332] 8.89 0.13 [.350 .005] O 14.35 Max. [.565] 41.92 [1.650] Recommended Panel Cutout Part No. 1274007-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 77 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Mini BNC Connectors, 75 Ohm Product Facts Material and Finish Bayonet locking coupling mechanism 40% more interconnects in the same area Compatible with TROMPETER tooling Ideal for telecommunications and broadband applications Shells, Bodies, Mtg Nuts -- Brass, nickel plated Washers -- Stainless Steel, nickel plated Ferrule -- Copper or Brass, tin plated Center Contacts -- Phos Bronze and Brass, gold plated Dielectrics -- PTFE Electrical Characteristics Tyco Electronics introduces the Mini BNC series of RF connectors to meet the growing demand for next generation telecommunications and broadband applications where higher connector densities are needed. Preserving the characteristics that have made the standard BNC so popular, the Mini BNC offers the same high performance currently found in standard Tyco Electronics BNC series, but offers 40% more interconnects in the same area. The Mini BNC offering is an excellent fit for 75 Ohm systems, offering 500 mating cycles, electrical performance through 2 GHz, and is completely intermateable with competitive miniature BNC offerings. Tyco Electronics' Mini BNC product offers the same advantage of the bayonet locking mechanism as our standard BNC, allowing quicker connect and disconnects than standard threaded interfaces. It uses standard BNC installation tooling meaning there is no need for retraining of field telco installers, and it utilizes the same PCB footprint on the jack side, providing a drop in replacement for DS3 telco applications. Mini BNC connector configurations currently available include PCB, panel mount, and flexible cable. Other options can be reviewed as well, including additional cable sizes, adapters, PCB surface mounting, and tape and reel packaging. Call your local sales office or authorized distributor for additional information or samples of the Mini BNC connector series. Tyco Electronics is a leading supplier of RF and Microwave connectors and cable assemblies, and provides advanced technology products from well known and industry leading brands, including AMP and M/A-COM. Frequency -- DC - 2 GHz Nominal Impedance -- 75 ohms Voltage Rating -- 300 Volts (VRMS maximum) @ Sea Level VSWR -- 1.10 max to 500 MHz (Return Loss -26.4 dB) 1.16 max to 1 GHz (Return Loss -22.6 dB) Insulation Resistance -- 1,000 megohms minimum Dielectric Withstanding Voltage -- 1,000 Volts (VRMS maximum) @ Sea Level Contact Resistance -- 12 milliohms maximum Mechanical Characteristics Connector Durability -- 500 mating cycles Force to Engage -- 7 pounds maximum Force to Disengage -- 1 pound minimum Center Contact Retention -- 2 pounds minimum Cable Retention -- 20 pounds minimum Vibration -- EIA-364-28, Test Condition VII, Condition D Shock -- EIA-364-27, Method H Environmental Characteristics Temperature Rating -- -40 to +85C Moisture Resistance -- EIA-364-31, Method II, Condition C Thermal Shock -- EIA-364-32 Note: Performance specifications are typical, but may not apply to all connector types. Related Product Data 32.89 Ref. [1.29] TROMPETER is a trademark of Trompeter Electronics, Inc. BNC 27.52 Ref. [1.08] Product Specification -- 108-2159 Sample Kit -- 1773042 Mini BNC 78 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Mini BNC Connectors, 75 Ohm (Continued) Interface Dimensions K OH Mini BNC Jack Reference Plane J OA OB OC OD OE L G F M A 8.89-9.14 .350-.360 B 7.37-7.62 .290-.300 C 7.11-7.21 .280-.284 D 6.63-6.73 .261-.265 E 6.20-6.30 .244-.248 Mini BNC Plug Dimensions F G 5.03-5.13 4.39-4.50 .198-.202 .173-.177 E H 1.32-1.42 .052-.056 J 3.86-4.27 .152-.168 K 7.70 Min. .303 Reference Plane L 0.18-0.30 .007-.012 M 4.01 Min. .158 S G OC OD OB OT K OA OH F P M R Typ. L O N Typ. Q J Q Ref. Contact Types A 7.70-7.80 .303-.307 K 1.57-1.68 .062-.066 -- C 0.71-0.76 .028-.030 D 11.43-11.68 .450-.460 Dimensions E 4.27-4.93 .168-.194 F 0.94-1.35 .037-.053 G 1.57-1.68 .062-.066 L 0.64-0.74 .025-.029 M 1.47-1.57 .058-.062 N 0.20-0.30 .008-.012 Dimensions P 4.62-4.93 .182-.194 Q 2.84-3.38 .112-.133 B H 9.60-9.70 .378-.382 J 2.50-2.59 .098-.102 R S 29-31 14-16 T 6.20-6.30 .244-.248 79 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Mini BNC Connectors, 75 Ohm (Continued) Flexible Cable -- Crimp Attachment Straight Cable Plug 27.69 Max. [1.090] O 11.56 [.455] Cable 735A 734A RG 179 Part Number 1274563-1 1274563-2 1274563-3 Cable 735A 734A RG 179 Part Number 1274566-1 1274566-2 1274566-3 22.73 Max. [.895] Right-Angle Cable Plug O 11.56 [.455] 23.89 Max. [.940] Bulkhead Cable Jack 26.92 Max. [1.060] 0.51 [.020] 13.46 [.530] R 4.83 [1.90] 4.06 [.160] Recommended Panel Cutout Tolerance: 0.08 [.003] 7.82 [.308] 3/8 - 32 UNEF-2A Cable 735A 734A RG 179 Part Number 1274568-1 1274568-2 1274568-3 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 80 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Mini BNC Connectors, 75 Ohm (Continued) Printed Circuit Board 0.76 Sq. [.030] Typ. Straight Jack Receptacle 7.54 Sq. [.297] 15.44 [.608] O 0.97 [.038] 3.99 [.157] Typ. Part Number 1274571-1 Right-Angle Jack Receptacle 15.37 [.605] 10.62 [.418] 6.58 [.259] 0.76 Typ. [.030] Sq. Part Number 1274572-1 7.54 Sq. [.297] 3.99 Typ. [.157] O 0.97 [.038] Right-Angle Bulkhead Jack Receptacle 4.69 [.185] 7.54 [.297] O 10.92 [.430] 8.53 [.336] 3.81 [.150] 8.48 [.334] 0.76 [.030] Sq. Typ. Part Number 1274584-1 3/8 - 32 UNEF-2A O 0.97 [.038] 2 Position, Right-Angle, Bulkhead Jack Receptacle 22.45 [.884] 3.99 Typ. [.157] 9.50 [.374] 2.54 [.100] 13.59 [.535] O 7.49 Typ. [.295] 12.70 [.500] 24.10 [.949] O 1.27 Typ. [.050] Description With Hardware Without Hardware Part Number 24.21 [.953] 7.65 [.301] 1274663-2 1274684-1 0.51 Typ. [.020] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 3.94 Typ. [.155] 81 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount bulkhead BNC version available Drop-in replacement for Tyco Electronics standard BNC printed circuit board connectors One-piece design and robotic capacity to reduce assembly time Tyco Electronics capacitively decoupled connectors provide the fast, better way to reduce noise and reduce ground loops on coaxial interconnections. The highfrequency noise generated by fast rise times can cause both false triggering of circuits as well as emissions that can be radiated or conducted outside the equipment. Such emissions can interfere with nearby equipment. Ground loops are also a problem for networked systems. Ground loops are caused when two interconnected units are at different voltage potentials. The typical way to handle such EMI and ground loop problems is to decouple the cable shield from the ground panel by soldering a ceramic disk capacitor between the cable shield and the panel. The capacitor shunts high-frequency noise to ground. While effective, this approach is time consuming and expensive. The Capacitively Decoupled connector has built-in chip capacitors. These capacitors establish the electrical contact between the outer shield and a clip. This clip provides a short electrical path between the capacitors and panel. As a result, high-frequency noise is effectively shunted to ground, while the DC path is blocked. The connectors offer compatibility in design and manufacture. The same footprint and dimensional envelope make them a drop-in replacement for Tyco Electronics standard BNC or TNC printed circuit board connectors. In addition, they can be robotically picked and placed for highspeed automated assembly to pc boards. Product Specification 108-1263 -- BNC Decoupled PCB Press-Fit Connection 108-1269 -- BNC Decoupled PCB Connectors 108-1490 -- BNC Decoupled Cable Mount 82 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) PC Board/Panel Mount Jacks Decoupled to Panel Style A Vertical BNC 15.08 [.625] Material Body -- VALOX, black Dielectric -- Polymethylpentene 20.96 [.825] Note: Both styles are shown with a standard clip. See next page for other clip styles. For height dimensions see chart on page 85. 34.93 [1.375] 2.01 0.08 [.079 .003] (2 Holes) 5.08 0.05 [.200 .002] 12.83+0.13 -0.00 5.08 0.05 .002] 2.54 0.05 [.200 [.100 .002] 10.16 0.08 [.400 .003] [.505+.005] -.000 Dia. 0.89 0.08 [.035 .003] G S 10.16 0.08 [.400 .003] 5.54+0.08 -0.00 [.218+.003] -.000 (Top View) Maximum Panel Thickness 6.1 [.240] Recommended PC Board Layout Recommended Panel Cutout Style B Right-Angle BNC B CL 20.96 [.825] A 10.16 0.08 [.400 .003] 2.01 0.08 [.079 .003] (2 Holes) 34.93 [1.375] 12.83+0.13 -0.00 [.505+.005] -.000 Dia. 5.08 0.05 [.200 .002] 5.08 0.05 [.200 .002] 2.54 0.05 [.100 .002] G S Mating Face 0.89 0.08 [.035 .003] 5.54+0.08 -0.00 [.218+.003] -.000 (Top View) Recommended PC Board Layout Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout VALOX is a trademark of General Electric Company. 83 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) Clip Styles 19.30 Max. [.760] Clip Width 14.76 Clip [.581] Width 20.96 [.825] 20.96 [.825] Standard Flush For closer centerline-to-centerline connector spacing .304 [.012] .304 [.012] 2.54 [.100] Max. Recommended Panel Mount 2.54 [.100] Max. Recommended Panel Mount 20.96 [.825] Extended For use with or without a jam nut Shortening Bar 20.96 [.825] Short Electrical Path For reduced series inductance in ground path 84 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) PC Board/Panel Mount Jacks Decoupled to Panel Mounting Post Styles (Continued) L L Standard Compliant BNC Description Capacitance/ Voltage Clip Mounting Post Vertical 50 9400pF 1500VDC 9400pF 1500VDC 9400pF 1500VDC 9400pF 1500VDC 9400pF 1500VDC 20000pF 500VDC 7900pF 1600VDC 9400pF 1500VDC 9400pF 1500VDC Standard Standard Standard Right-Angle 50 Standard Right-Angle W/O Mounting Post 502 Low Profile Right-Angle 50 Low Profile RightAngle W/Special Clip & High Temperature Housing 50 Low Profile Right-Angle W/High Temperature Housing 50 Low Profile Right-Angle 75 Ultra Low Profile Right-Angle 75 L Mounting Post Length 3.48 .137 4.01 .158 2.79 .110 B* A* Style1 Part No. -- -- A 5413476-2 8.59 .338 8.59 .338 8.59 .338 6.91 .272 6.91 .272 6.91 .272 6.91 .272 6.91 .272 B 5413524-2 B 5413524-5 B 5414215-1 B 5413515-2 B 5413515-3 B 5413515-7 B 5413515-8 B 5413515-9 Standard Standard Standard Compliant Standard -- -- Standard Standard Standard Standard Standard Compliant Standard Compliant Standard Compliant 4.01 .158 4.01 .158 2.79 .110 4.70 .185 2.79 .110 15.88 .625 15.88 .625 15.88 .625 13.18 .519 13.18 .519 13.18 .519 13.18 .519 13.18 .519 9400pF 500VDC Extended Compliant 2.79 .110 13.18 .519 6.91 .272 B 5414284-2 9400pF 500VDC Flush Compliant 4.70 .185 13.18 .519 6.91 .272 B 5414352-1 9400pF 1500VDC 9400pF 1500VDC 9400pF 1500VDC Standard Standard B 5414094-2 Standard 5415103-1 Compliant 11.68 .460 11.68 .460 -- Standard 13.18 .519 6.17 .243 6.17 .243 -- Standard 4.01 .158 4.01 .158 2.79 .110 -- 5415103-2 1See pages 83 and 84 for Connector Styles. customer drawing for PC Board Layout. *See page 83 for dimension reference. 2See Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 85 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) Right-Angle BNC Jack PC Board/Panel Mount Decoupled to Panel ESD Protected ESD Protection ESD Device See page 83 Style B for panel cutout and recommended PC board configuration. 1/2-28 Thread Note: See Tyco Electronics Customer drawing for voltage breakdown rating. Description Capacitance/ Voltage Contact Plating Clip Mounting Post L Mounting Post Length B* A* Part No. 7900pF 1500VDC Gold1 Standard Compliant 2.79 .110 13.18 .519 6.91 .272 5414651-3 9400pF 1500VDC Gold1 Standard Standard 4.01 .158 15.88 .625 8.59 .338 5415085-1 9400pF 1500VDC Gold1 Flush Compliant 2.79 .110 13.18 .519 6.91 .272 5415216-1 50 Product Low Profile Right-Angle W/ ESD Protection 75 Product Standard Right-Angle W/ ESD Protection Low Profile Right-Angle ESD Protected *See page 83 for dimension reference. Right-Angle BNC Jack PC Board/Panel Mount Decoupled to Board ESD Protected Capacitance 9400pF 13.18 [.519] Voltage 1500VDC ESD Device Compliant Board Lock Part No. 5415205-1 2.01 0.08 [.079 .003] Dia. 2 Holes 10.16 0.08 [.400 .003] + 0.13 12.83 - 0.00 .005 ] [.505 +- .000 Dia. 0.89 0.08 [.035 .003] Dia. 2 Holes + 0.13 11.13 - 0.00 .005 ] [.438 +- .000 2.54 0.05 [.100 .002] 5.08 0.05 [.200 .002] Recommended PC Board Layout Recommended Panel Cutout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 86 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Decoupled Connectors (Continued) Press-Fit, Vertical BNC Jacks, PC Board Mount Decoupled to Board 17.48 Sq. [.688] 12.70 [.500] 6.35 [.250] 1.02 0.08 Dia. [.040 .003] 3 Plc. Plated Thru Hole Material 12.70 [.500] 1.70 Dia. [.067] 2 Plc. Plated Thru Hole For Drive Screw Dielectric-- TEFLON Isolation Pad -- Polyester Plating Body -- Nickel Ground Clip -- Nickel Center Contact -- Gold Action Pin Legs -- Gold 6.35 [.250] 15.88 Max. [.625] Ground Area 9.14 [.360] Dia. OD 6.35 [.250] Dia. ID Recommended PC Board Layout Part No. 5414553-1 50 Ohm Part No. 5414493-4 75 Ohm BNC Bulkhead Jacks, Crimp 12.83+0.13 40.64 Max. [1.600] -0.00 [.505+.005] -.000 Dia. 5.54+0.08 -0.00 [.218+.003] 16.51 [.650] Max. over points RG/U Cable Termination Type Center Contact Plating Body Plating Dielectric Style RG 58, 58A, 58B, 58C RG 174, 174A, 316, 188, 188A RG 174, 174A, 316, 188, 188A RG 179, 187 Hex Crimp Hex Crimp Hex Crimp Hex Crimp Gold Gold Gold Gold Nickel Nickel Nickel Nickel Polymethylpentene Polymethylpentene Polymethylpentene Polymethylpentene Commercial Commercial Commercial Commercial Description 50 50 50 75 ESD -.000 Recommended Panel Cutout Interchangeable Dies for Hand Tool 69710-1 & 626 Pneu. Head 318161-1 58436-1 58436-3 58436-3 58425-2 Part No. 5414758-1 5414758-2 5414758-3 5415779-1 TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 87 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Self-Terminating PC Board Connectors Product Facts Built-in chip resistor terminates the signal line to the proper characteristic impedance when in the unmated state Can be ordered with standard resistance values (50, 75 and 100 Ohms) Fits into printed circuit board footprint of standard BNC PCB connectors One-piece design is compatible with robotic insertion and wave soldering Tyco Electronics SelfTerminating printed circuit board BNC connectors provide the capability to automatically terminate an input-output port to the system characteristic impedance. This feature eliminates the need for external terminators when an I/O port is not being used. The Self-Terminating BNC jack contains a chip resistor which bridges the signal and ground paths when the connector is not mated to a BNC plug. When mated, the resistor is switched out of the circuit for direct signal transmission to the board. The footprint of this connector is compatible with standard BNC connectors, allowing it to be easily installed into existing circuit board designs and suitable for robotic insertion for high speed automated assembly onto the PC board. 14.73 [.580] 15.86 [.625] The Self-Terminating BNC is available in standard resistance values for use in networking and video systems. Contact Tyco Electronics for new designs that include switching and capacitively decoupled versions. 1/2-28UNEF-2A Material Body -- Polyester, PBT, black Dielectric -- Polyester, PBT, natural Plating 34.96 [1.375] Shell -- Tin Center Contact -- Gold on mating end and Tin on solder tails 20.96 [.825] Product Self-Terminating BNC PCB Termination Resistance 75 Part Number 5414367-2 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 88 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Twin BNC Connectors Product Facts Crimp connectors require only one-stroke crimping of both conductors, plus braid and cable support Lower installed cost with one-stroke crimp Reduced noise levels because of Tyco Electronics solderless crimping techniques Captive inner contact stability No danger of heat damage to coaxial cable Ease of inspection Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 R PC Board soldered connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 R Certified by Canadian Standards Association File No. LR 7189 The Twin BNC Connector is a quick connect/disconnect, weatherproof connector designed in accordance with MIL-C-39012 to meet the stringent requirements of MIL-STD-1553 Multiplex Data Bus. These twin coaxial cable connectors are a unique development by Tyco Electronics which has resulted in the production of high level RF components. Termination of these connectors to twin conductor cable is made with Tyco Electronics exclusive one crimp method which simultaneously terminates inner conductors, outer braid and cable support with one stroke of the matching Tyco Electronics tool. These rugged connectors accommodate today's most commonly used twin conductor cable sizes. Electrical Characteristics Environmental Characteristics Nominal Impedance -- Non-constant Working Voltage -- 500 volts rms sea level Insulation Resistance -- 5000 megohms min. Dielectric Withstanding Voltage -- 1500 volts rms sea level Temperature Range -- -55C to +85C Vibration -- MIL-STD-202, Method 204, Condition B Shock -- MIL-STD-202, Method 213, Condition I, 100 G's Salt Spray -- MIL-STD-202, Method 101, Condition B Temperature Cycling -- MIL-STD202, Method 102, Condition C Mechanical Characteristics R Materials Brass -- QQ-B-626 Beryllium Copper -- QQ-C-530 TEFLON -- MIL-P-19468 Polypropylene -- General purpose Copper, Annealed -- QQ-C-576 Phosphor Bronze -- QQ-B-750 Silicone Rubber -- ZZ-R-765 Mating/Unmating -- Bayonet lock-quick connect/ disconnect Cable Attachment -- Crimp type Simultaneous center and braid Coupling Nut Retention -- 100 lbs. [444 N] min. Cable Retention -- 25 lbs. [111 N] min., RG 108A/U cable Durability -- 200 cycles per MIL-C-39012 Plating Packaging -- All connectors are packaged individually unless otherwise noted. Silver -- QQ-S-365 Nickel -- QQ-N-290 Tin -- ASTM-B-545 TEFLON is a trademark of E.I. Dupont de Nemours and Company. 89 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Twin BNC Connectors (Continued) Plugs 33.74 Max. [1.328] 14.61 Dia. [.575] Max. RG/U Cable 108, 108A BELDEN 9272, 89272 Center Contact Plating Silver Silver Body Plating Dielectric Integral Die Hand Tool Part No. Silver Nickel TEFLON Polypropylene 69667 69667 5332225 5332225-5 Silver Silver TEFLON 69667 5332225-3 Silver Nickel Polypropylene 69667 5332225-6 TROMPETER TWC-124-2 ROLM 49D2401 RAYCHEM 7824D013 Bulkhead Jack +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] +0.13 11.05 -0.00 [.435 +.005 -.000 ] H 38.1 Max. [1.500] Maximum Panel Thickness 3.18 [.125] Recommended Panel Cutout H = 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points BELDEN is a trademark of Belden Wire and Cable Company. ROLM is a trademark of the Rolm Corp. TEFLON is a trademark of E.I. Dupont de Nemours and Company. TROMPETER is a trademark of Trompeter Electronics, Inc. RG/U Cable Center Contact Plating Body Plating 108, 108A BELDEN 9272, 89272 Silver Silver Dielectric CERTI-CRIMP Hand Tool with Integral Die Integral Die Hand Tool Die Insert for Tools: Hand Tool-69710-1, 626 Pneu. Head 318161-1 Part No. TEFLON -5-- 69667 69708 5332342 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 90 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Twin BNC Connectors (Continued) Right-Angle PC Board/ Panel Mount Jacks 15.88 Mtg. [.625] Hgt. +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] Material Body -- VALOX, White Center Contacts -- Gold Dielectric -- Polymethylpentene 36.83 Max. [1.450] +0.08 5.54 -0.00 [.218 +.003 -.000 ] Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout With Mounting Posts Part No. 5228686-1 2.01 0.05 [.079 .002] Dia. (2 Holes) 10.16 0.08 [.400 .003] 5.08 0.08 [.200 .003] 6.35 0.08 [.250 .003] 2.54 0.08 [.100 .003] 1.6 0.05 [.063 .002] 3.2 0.08 [.126 .003] 0.89 0.08 [.035 .003] Dia. (3 Holes) Recommended PC Board Layout +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] Vertical PC Board/ Panel Mount Jacks +0.08 5.54 -0.00 [.218 +.003 -.000 ] 35.56 Mtg. [1.400] Hgt. Material Body -- VALOX, White Center Contacts -- Gold Dielectric -- Polymethylpentene Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout With Mounting Posts Part No. 5221198-1 3.2 0.13 [.126 .005] Lockwasher and Jam Nut 1.6 0.05 [.063 .002] 5.08 0.08 [.200 .003] 10.16 0.08 0.08 [.400 .003] 2.54 [.100 .003] Part No. 1-329632-2 0.89 0.05 [.035 .002] Dia. (3 Holes) Part No. 1-329631-2 2.01 0.05 [.079 .002] Dia. (2 Holes) VALOX is a trademark of General Electric Company. 5.08 0.08 [.200 .003] 10.16 0.08 [.400 .003] Recommended PC Board Layout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 91 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Twin BNC Connectors (Continued) Vertical PC Board Mount Jack 10.16 0.08 [.400 .003] +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] 2.01 0.05 Dia. [.079 .002] 2 Plcs. 5.08 0.08 [.200 .003] 0.89 0.05 Dia. [.035 .002] 2 Plcs. 1.17 0.08 Dia. [.046 .003] Plating Body -- Nickel Center Contacts -- Gold Dielectric -- Polymethylpentene +0.08 5.54 -0.00 [.218 +.003 -.000 ] Part No. 5415832-1 Recommended Panel Cutout 3.48 0.08 [.137 .003] 3.20 0.13 [.126 .005] 10.16 0.08 [.400 .003] PCB Configuration Bulkhead Jack Adapter +0.13 12.83 -0.00 Dia. [.505 +.005 -.000 ] Plating Body -- Silver Center Contacts -- Silver H 11.05 0.08 [.435 .003] 35.72 Max. [1.406] Maximum Panel Thickness 3.18 [.125] H = 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points Recommended Panel Cutout Part No. 5332215 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 92 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors F Series and G Series Connectors Product Facts Designs meet SCTE requirements where applicable Plugs, jacks and adapters available Board mount and cable mount available Surface mount connectors available Sealed product available High current carrying capabilities Tyco Electronics F Series connectors offer performance, which is driven by evolving OEM requirements and expectations. Improved VSWR beyond 1 GHz, high current carrying capability, and pressure sealed products are now part of the standard product offering. Designs compliant with ANSI/SCTE, Bellcore, UL/CSA, and various other industry and agency standards are also available. Product Specification Instruction Sheets 108-1518 -- Connector Coaxial, F Series, RF, Single Crimp Plug 108-1643 -- Connector Coaxial, F Series, RF, PCB Mounted 108-1755 -- Connector Economy, F Series, RF Coaxial, PCB 108-1757 -- Connector, 15 amp, G Series Jack, PCB 108-1758 -- Connector, F Series Jack, PCB, Surface Mount 108-1629 -- Feedthrough, Sealed F Port Jack 408-9221 -- Coaxial Series F Plug Connectors 408-4402 -- Series F & G Coaxial Cable Bulkhead Jack Connector 408-4291 -- PRO-CRIMPER II Hand Tool Assembly 58622-1 and 58622-2 Both cable applied and PCB terminated products are offered in a variety of styles. The cable connectors are designed for fast, accurate termination with tools common to the industry. Application cost reductions can be achieved using Tyco Electronics PCB terminated products; pressfit designs eliminate the need for soldering. Center of gravity control and PCB retention designs prevent tipping and eliminate fixturing during soldering. Integral mechanical keys and "D flats" prevent rotation in panels. These products provide the highly reliable, cost-effective solutions demanded by today's evolving marketplace. 93 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors F Series Connectors Plugs Crimp Style A 21.59 Max. [.850] Screw-On Style B Crimp Style, Hex C RG/U Cable Termination Type Body Plating Style "B" Threads M7x1 PRO-CRIMPER Hand Tool Assembly 58425-3, 58436-2, or 58621-2 -- 6 Crimp Nickel A -- 6 59 BELDEN 9104, 9100* Screw-On Nickel B 221540-2 C -- 58425-3, 58436-2, or 58621-2 Crimp Nickel 414766-1 59 Crimp Nickel C -- 58425-3, 58436-2, or 58621-2 414766-8 Part No. 221539-2 *NID to inside cable. 8.23 [.324] Hex Crimp. RG/U Cable 179 Headend Patch Panel Termination Type Crimp Center Contact Plating Body Plating Termination Tooling Part No. Nickel Braid: M 22520/5-01 w/ DANIELS Die Set Hx4-1637 (.128 Hex) Contact: M 22520/2-01 w/ DANIELS Positioner K727, Pos. 2 5415226-1 Tin Right-Angle Plugs, Crimp 39.11 0.20 [1.540 .008] 10.50 0.20 [.413 .008] 9.40 [.370] 1.50 0.30 [.059 .012] RG/U Cable 6 Std. Cable BELDEN is a trademark of Belden Wire and Cable Company. DANIELS is a trademark of Daniels Manufacturing Corporation. Termination Type Center Contact Plating Body Plating Termination Tooling Part No. Crimp Tin Nickel use .324 inch Hex 887098-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 94 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors F Series Connectors (Continued) Bulkhead Jacks, Crimp, Rear Mount RG/U Cable 179 Center Contact Plating Bright Tin Body Plating Die Set Part No. Nickel 220210-1* 5415712-1 Body Plating Die Set Part No. Nickel 220210-1** 5415569-2 **Use with hand tool 354940-1 Bulkhead Jacks, Crimp, Splash Resistant, Front Mount RG/U Cable 179 Center Contact Plating Bright Tin **Use with hand tool 354940-1 Right-Angle PC Board Mount Jacks 4.11 0.08 [.162 .003] + 0.13 9.65 - 0.00 .005 ] [.380 +- .000 Dia. 2.50 0.08 [.098 .003] 4 Plcs. 0.99 0.08 [.039 .003] 8.20 0.08 [.323 .003] A B Recommended Panel Cutout C Body Plating Barrel Base Center Contact Plating Nickel Tin Tin Nickel Tin Tin PC Board Layout A 25.40 1.00 31.75 1.250 Dia. .005 ] [.350 +- .000 C 15.90 .626 22.25 .876 4.11 0.08 [.162 .003] + 0.13 8.89 - 0.00 + 0.13 9.65 - 0.00 .005 ] [.380 +- .000 Dimensions B 14.48 .570 14.48 .570 Part No. 5415302-1 5415302-2 2.50 0.08 [.098 .003] 4 Plcs. 0.99 0.08 [.039 .003] A B 8.20 0.08 [.323 .003] Recommended Panel Cutout C *Connectors willl accept a center conductor, diameter of 0.51-1.19 [.020-.047] Body Plating Barrel Base Nickel Tin Center Contact Plating Tin PC Board Layout A 29.97 1.180 Dimensions B 17.53 .690 C 12.19 .480 Part No. 5887078-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 95 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors F Series Connectors (Continued) Right-Angle PC Board Mount Jacks (Continued) 2.26 0.08 [.089 .003] 4 Plcs. 0.99 0.08 [.039 .003] + 0.13 9.65 - 0.00 .005 ] [.380 +- .000 Dia. + 0.13 8.03 - 0.00 .005 ] [.316 +- .000 9.14 0.08 [.360 .003] 4.57 0.08 [.180 .003] B 5.77 0.08 [.227 .003] A Recommended Panel Cutout Body Plating Barrel Base C Nickel PC Board Layout Center Contact Plating Tin Dimensions B 15.75 .620 A 33.81 1.331 Tin C 19.86 .782 Part No. 5415276-2* *Connector will accept center conductor diameter range of 0.56-1.19 [.022-.047]. Right-Angle PC Board Mount Jack, High Temperature 4.11 0.08 [.162 .003] + 0.13 8.89 - 0.00 [.350 +- .005 .000] 2.50 0.08 [.098 .003] 4 Plcs. 0.99 0.08 [.039 .003] + 0.13 9.65 - 0.00 8.20 0.08 [.323 .003] .005 ] [.380 +- .000 Dia. *High temperature versions use PTFE dielectric (see table) Recommended Panel Cutout A PC Board Layout B C Bottom Dielectric Middle Front Solder Post Plating Acetal Acetal Polypropylene Nickel Acetal Acetal Polypropylene Tin PTFE PTFE PTFE Tin A 35.61 1.402 35.61 1.402 25.40 1.00 Dimensions B 16.89 .665 16.89 .665 17.91 .705 C 26.11 1.028 26.11 1.028 14.99 .590 Part No. 5415024-1 5415024-3 5415214-1* *Pin in paste reflow / high temperature processing. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 96 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors F Series Connectors (Continued) 15.88 [.625] Surface Mount, Straddle Jack 1.78 [.070] 1.91 [.075] 2 Plcs. Contact will accept center conductor diameter range 0.56-1.19 [.022-.047] Center of gravity balanced for automated pick and place and anti-tipping during solder reflow process. 9.40 Typ. [.370] 18.29 0.76 [.720] [.030] Typ. 12.95 R 1.27 [.050] 14.61 [.575] 1.65 [.065] [.510] 13.21 [.520] Part No. 5415322-2 Recommended PC Board Layout Vertical PC Board Mount Jacks 9.50 [.374] 4.32 0.08 [.170 .003] + 0.13 9.65 - 0.00 .005 ] [.380 +- .000 23.62 [.930] Dia. 2.77 0.08 [.109 .003] 4 Plcs. 1.22 0.08 [.048 .003] Connector will accept a center conductor diameter of 0.56-1.19 [.022-.047] 16.0 [.630] Part No. 5887046-1 4.32 0.08 [.170 .003] 8.64 0.08 [.340 .003] 8.64 0.08 [.340 .003] Recommended Panel Cutout PC Board Layout 36.45 [1.43] 8.64 [.340] 1.07 0.05 [.042 .002] 4 Plcs. 13.49 [.531] 9.50 Sq. [.374] 1.37 [.054] 4.32 Typ. [.170] 2.36 4 Plcs. [.093] 8.64 [.340] Typ. 8.64 0.08 Typ. [.340 .003] Part No. 6274020-1 4.32 [.170] PC Board Layout Adapters Jack to Jack Feed through Adapter Jack to Plug Right-Angle Adapter Part No. 282938-2 Part No. 5887089-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 97 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors G Series Connectors Bulkhead Jack, Crimp RG/U Cable 179 Termination Type Crimp Body Plating Nickel Part No. 5415683-1 Termination Tooling: Use 220210-1 die set for Contact only. Use Certi-Crimp Hand Tool 220009-1 for ferrule. Bulkhead Jack, PC Board 9.73 - 9.58 [.383 - .377] Connector will accept center conductor diameter range 0.97-1.65 [.038-.065] (415332-1 only) 8.15 - 8.00 [.321 -.315] Part No. 5415332-1 (15 Amp) Part No. 6274032-1 9.73 - 9.58 [.383 - .377] Recommended Panel Cutout for 5415332-1 Recommended Panel Cutout for 6274032-1 Jack, Bulkhead PC Board Connector will accept center conductor diameter range 0.97-1.07 [.038-.042] Part No. 5887000-1 Right-Angle PC Board Mount Plug 1.37 0.08 [.054 .003] Includes board retention feature to prevent tipping during solder process. 0.89 0.08 [.035 .003] 1.93 0.08 [.076 .003] 4 Plcs. 4.57 0.08 [.180 .003] 9.14 0.08 [.360 .003] 10.29 0.08 [.405 .003] Part No. 5415406-2 PC Board Layout Vertical PC Board Mount Plug 3.81 Typ. [.150] 2.03 [.080] Typ. 7.62 [.300] Typ. 7.62 Typ. [.300] 1.32 [.052] Typ. 2.08 [.082] 4 Plcs. 1.27 [.050] PC Board Layout Part No. 6274045-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 98 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors G Series Connectors (Continued) Adapters F Jack to G Jack Bulkhead Adapter 9.65 + 0.13 - 0.00 [.380 + .005] - .000 Dia. Part No. 415327-1 F Jack to G Plug Bulkhead Adapter Recommended Panel Cutout 11.30 [.445] Connector will accept center conductor diameter range of 0.51-1.19 [.020-.047]. Panel nut 887003-3 available for float mounting. 12.95 [.510] Part No. 415523-1 Recommended Panel Cutout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 99 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors Product Facts Performance to 12.4 GHz and beyond Available in various base metal options, including stainless steel, brass and zinc diecast Uses industry standard crimp tools and processes Available with corrosion resistant, non-magnetic White Bronze plating Meets all performance requirements for MIL-C-39012. Tyco Electronics offers a complete line of SMA connectors designed for performance to 18 GHz to satisfy the growing demand for SMA connectors in the wireless communications industry. The SMA product line offers stainless steel bodies, as well as nonferrous metals. Various plating options are available, including Gold and White Bronze. The SMA interface is fully compatible with Mil-C-39012. Between Series Adapters For SMA Between Series Adapters, see pages 251-260. While still offering various options on military (QPL) approved connectors, Tyco Electronics has developed a complete offering tailored to the commercial Communications industry. This includes 3 piece flexible cable products for popular RG 316, 142 and RD 316 cable utilizing industry standard HEX crimps. The SMA series meets the performance, quality and application requirements of the commercial marketplace. This includes White Bronze plating, a unique finish developed by Tyco Electronics to address the performance needs of the telecommunications market. This plating is highly resistant to wear, and contains no ferrous metals, thus displaying excellent intermodulation characteristics. To satisfy the broad range of commercial applications, SMA connectors are available in a broad range of standard configurations including; straight and right-angle cable applied plugs, bulkhead cable jacks, two and four hole flange mount panel jacks, straight and right-angle pcb mount jacks and various between and in series adapters. Numerous packaging and testing options are also available to meet specific system criteria as well. Additionally, standard military approved (QPL) interfaces are offered as well. Including connectors for semi-rigid cable and micro strip applications. The 3 Piece SMA offering is designed especially for applications in cellular infrastructure where InterModulation Products (IMP) must be minimized. By limiting non-linearities within the connectors, IMP is reduced and increased channel capacity can be offered. 100 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Specifications MIL-C-39012 Applicable Paragraph General Material 3.3 Finish 3.3.1 Design 3.4 Steel corrosion resistant per ASTM-A-582 and ASTM-A-484, Type 303. Beryllium copper per ASTM-B-196. PTFE Fluorocarbon per ASTM-D-1710. Center contacts shall be gold plated to a min. thickness of .00127 [.00005] in accordance with MIL-G-45204, ASTM-B-488. All other metal parts shall be finished as to provide a connector which meets the corrosion requirements. The design shall be such that the outline shown in this catalog and the interface dimensions of MIL-STD-348A are met. Electrical Insulation Resistance Corona Level Dielectric Withstanding Voltage RF High Potential Contact Resistance VSWR 3.11 3.22 3.17 3.23 3.16 3.14 RF Leakage Insertion Loss 3.26 3.27 The insulation resistance shall not be less than 10,000 megohms. Refer to applicable military slash sheet, product drawing or spec. Refer to applicable military slash sheet, product drawing or spec. Refer to applicable military slash sheet, product drawing or spec. Refer to applicable military slash sheet, product drawing or spec. Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on cable used. Refer to applicable military slash sheet, product drawing or spec. Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on cable used. Mechanical Force to Engage 3.5.1 Coupling Nut Retention Coupling Proof Torque Cable Retention Mating Characteristics 3.25 3.6 3.24 3.7 Connector Durability 3.15 Recommended Mating Torque -- The torque required to engage and disengage shall not exceed 2 in.-lbs. The longitudinal force is not applicable. 60 lbs. min. Applicable for plug connectors only. 15 in.-lbs. min. Applicable for plug connectors only. Refer to applicable military slash sheet or consult factory. Applicable to jack connectors only. Reference MIL-STD-348A for dimensions; oversize test pin .953 [.0375] min. dia., .76 - 1.14 [.030-.045] deep, insertion force 3 lbs. max. with .940 [.0370] min. dia. pin, withdrawal force 1 oz. min. with .902 [.0355] max. dia. pin. The connector to be tested and its mating connector shall be subjected to 500 insertion and withdrawal cycles at 12 cycles per minute max. The connector shall show no evidence of mechanical failure and shall meet the mating characteristic requirements. 7 to 10 in.-lbs. Environmental Vibration Shock Thermal Shock Corrosion (Salt Spray) Moisture Resistance 3.18 3.19 3.20 3.13 3.21 Specification MIL-STD-202, method 204, test condition D Specification MIL-STD-202, method 213, test condition I Refer to applicable military slash sheet or consult factory. Specification MIL-STD-202, method 101, test condition B. Specification MIL-STD-202, method 106. No measurements at high humidity. Insulation resistance shall be at least 200 megohms within 5 minutes of removal from humidity. 101 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Electrical Connector Type Cable Straight Cable Plug without Contact RG 402 (3.58 [.141]) Straight Cable Plugs & Jacks Solder Attachment Frequency VSWR Max. x (fGHz) (GHz) Corona Contact Resistance Insulation Dielectric RF (milliohms max.) Resistance Withstanding Extinction Voltage at Transmission Voltage Center Outer (megohms Ft. Loss min.) (Volts RMS) (V70,000 Contact Contact RMS min.) Note 1 1.02 + .005 N/A 2.0 10,000 N/A 250 RG 405 (2.16 [.085]) 18.0 RG 402 (3.58 [.141]) 18.0 3.58 [.141] Microporous 18.0 RG 401 (6.35 [.250]) 18.0 RG 174, 188, 316 Note 1 RG 55, 58, 141, 142, Note 1 223, 303, 400 1.05 + .005 1.05 + .005 1.05 + .005 1.07 + .007 1.15 + .01 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10,000 10,000 10,000 10,000 10,000 1000 1500 1500 1500 750 250 375 375 375 190 1.10 + .005 2.0 2.0 10,000 1000 250 Straight Cable Plugs & Jacks Solder Clamp Attachment RG 405 (2.16 [.085]) 12.4 1.10 + .015 2.0 2.0 10,000 1000 250 RG 402 (3.58 [.141]) 12.4 1.07 + .01 2.0 2.0 10,000 1500 375 Note 1 1.10 + .005 2.0 2.0 10,000 1000 250 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 18.0 18.0 18.0 18.0 12.4 18.0 12.4 18.0 1.15 + .01 -- 1.10 + .005 1.10 + .005 1.15 + .01 -- 1.2 + .02 1.07 + .01 1.07 + .01 1.07 + .01 1.07 + .01 1.18 + .015 1.18 + .015 1.15 + .015 1.10 + .010 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 750 750 1000 1000 750 750 500 1500 1500 1500 1500 1000 1000 1500 1500 190 190 250 250 190 190 125 375 375 375 375 250 250 325 250 Note 1 1.15 + .01 2.0 2.0 10,000 1000 250 Note 1 Note 1 Note 1 Note 1 Note 1 Note 1 1.15 + .02 1.15 + .02 1.15 + .02 1.18 + .02 -- 1.25 + .025 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10,000 10,000 10,000 10,000 10,000 10,000 750 1000 1000 750 750 500 190 250 250 190 190 125 Note 1 1.10 + .005 2.0 2.0 10,000 1000 250 Note 1 Note 1 18.0 18.0 18.0 1.15 + .01 -- 1.03 + .004 1.05 + .005 1.04 + .004 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10,000 10,000 10,000 10,000 10,000 750 750 1000 1000 1000 190 190 250 250 250 18.0 1.04 + .006 2.0 2.0 10,000 1000 250 18.0 18.0 18.0 12.4 1.07 + .010 1.07 + .010 1.07 + .015 1.15 + .015 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 10,000 10,000 10,000 10,000 1000 1000 1000 1000 250 250 250 250 N/A .03 -f(GHz) .03 -f(GHz) .03 -f(GHz) .03 -f(GHz) .06 -f(GHz) .06 -f(GHz) .03 -f(GHz) .03 -f(GHz) .06 -f(GHz) .06 -f(GHz) -- .06 -f(GHz) .06 -f(GHz) .06 -f(GHz) -- .06 -f(GHz) .05 -f(GHz) .05 -f(GHz) .05 -f(GHz) .05 -f(GHz) .04 -f(GHz) .04 -f(GHz) .04 -f(GHz) .05 -f(GHz) .07 -f(GHz) .07 -f(GHz) .07 -f(GHz) .07 -f(GHz) .07 -f(GHz) -- .07 -f(GHz) .08 -f(GHz) .08 -f(GHz) -- .03 -f(GHz) .03 -f(GHz) .03 -f(GHz) .04 -f(GHz) .04 -f(GHz) .04 -f(GHz) .08 -f(GHz) .08 -f(GHz) 18.0 N/A 2.0 2.0 10,000 1000 250 12.4 N/A 2.0 2.0 10,000 1000 18.0 1.05 + .005 2.0 2.0 10,000 1000 RG 55, 58, 141, 142 223, 400 RG 174, 188, 316 RG 180, 195 RG 55, 142, 223, 400 RG 58, 141, 303 Straight Cable Plugs & Jacks Crimp RG 174, 188, 316 Attachment RG 180, 195 RG 178, 196 RG 401 (6.35 [.250]) Straight Cable Plugs 6.35 [.250] Microporous & Jacks Compression 6.35 [.250] 3 Spline Clamp Attachment 6.35 [.250] 5 Spline RG 405 (2.16 [.085]) RG 405 (2.16 [.085]) RG 402 (3.58 [.141]) Right-Angle Cable Plugs Solder RG 402 (3.58 [.141]) Attachment RG 55, 58, 141, 142, 223, 303, 400 RG 174, 188, 316 RG 55, 142, 223, 400 RG 58, 141, 303 Right-Angle Cable Plugs Crimp RG 174, 188, 316 Attachment RG 180, 195 RG 178, 196 RG 55, 58, 141, 142, Right-Angle Cable 223, 303 Plugs Clamp RG 174, 188, 316 Attachment RG 180, 195 Non-Captured Epoxy Captured Flange Mount Plugs & Jacks Panel or Mechanical Capture Bulkhead Mount Field Replaceable Hermetic Launchers Epoxy Captured Bulkhead Feedthrough Jacks Mechanical Capture N/A Right-Angle Flange Mount Jacks N/A Printed Circuit Board N/A Mount Straight Terminal Right-Angle N/A Printed Circuit End Launch N/A Stripline Circuit Surface Launch N/A Stripline Circuit N/A Right-Angle Surface Launch Stripline Circuit N/A Straight Cable Plugs & Jacks Clamp Attachment RF High RF Potential Leakage at 5 MHz (dB min.) (V RMS) 670 -(90-fGHz) 670 1000 1000 1000 500 -(90-fGHz) -(90-fGHz) -(90-fGHz) -(90-fGHz) -(60-fGHz) 670 -(60-fGHz) 670 -(90-fGHz) 1000 -(90-fGHz) 670 -(60-fGHz) 500 500 670 670 500 500 335 1000 1000 1000 1000 670 670 1000 1000 -(60-fGHz) -(60-fGHz) -(60-fGHz) -(60-fGHz) -(60-fGHz) -(60-fGHz) -(60-fGHz) -70 dB min. -70 dB min. -70 dB min. -70 dB min. -(90-fGHz) -(90-fGHz) -(90-fGHz) -(90-fGHz) 670 -(60-fGHz) 500 670 670 500 500 335 -(60-fGHz) -(60-fGHz) -(60-fGHz) -(60-fGHz) -(60-fGHz) -(60-fGHz) 670 -(60-fGHz) 500 500 670 670 670 -(60-fGHz) -(60-fGHz) -(100-fGHz) -(60-fGHz) -(100-fGHz) 670 -(100-fGHz) 670 670 670 670 -(60-fGHz) -(100-fGHz) -(90-fGHz) -(90-fGHz) N/A 670 N/A 250 N/A 670 N/A 250 .03 -f(GHz) 670 -(60-fGHz) .03 -f(GHz) .08 -f(GHz) .08 -f(GHz) 670 -(60-fGHz) 670 670 -(60-fGHz) -(60-fGHz) 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 12.4 18.0 1.15 + .015 1.07 + .015 2.0 2.0 2.0 2.0 10,000 10,000 1000 1000 250 250 1. Maximum operating frequency of cable per MIL-C-17. 2. Specifications do not apply to hermetic or compression crimp connectors. 3. For Brass SMA: Frequency Range DC-6GHz, Impedance 50 Ohms, Insulation Resistance. 102 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Interface Mating Dimensions F D G Dia. Ref. Plane Note 2 C Ref. Plane Note 2 C H Dia. B Dia. Plug B .250-36 UNS-2A Thd. D A B Dia. Dia. A Dia. E D G Dia. F G .250-36 UNS-2B Thd. E J Dia. H K H Dia. Plug A Plug Jack Dimension A B Minimum 6.35 .250 Maximum Dimension -- A -- 4.59 .1808 3.43 .135 0.25 .010 2.54 .100 0.25 .010 0.94 .037 0.38 .015 B C -- D 0.00 .000 E -- F 0.00 .000 0.90 .0355 0.00 .000 G H C D E F G H J K Minimum 5.28 .208 4.60 .181 1.91 .075 0.00 .000 0.38 .015 2.92 .115 0.00 .000 4.32 .170 .124 .049 5.54 .218 Maximum 5.49 .216 -- 1.98 .078 0.25 .010 1.43 .045 -- 0.25 .010 -- 1.30 .051 -- Notes: 1. ID to meet VSWR and contact resistance when mated with 0.51 +.025/-.013 [.036 +.0010/-.0005] Dia. Pin. 2. When fully engaged, the two reference planes must coincide with metal to metal contact. 3. Metric equivalents (to the nearest 0.01mm) are given for general information only. 103 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Flexible Cable Straight Cable Plug, Solder 30.2 Ref. [1.187] A 7.9 [.312] Hex. Heat Shrink Tubing 16.7 [.658] Ref. Ref. Plane Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Dimension A Instruction Sheet Part No. 55, 58, 141, 142, 223, 303, 400 Stainless, Gold1 No Solder 408-4821 1051638-1 174, 188, 316 Stainless, Gold1 No Solder 19.7 .775 17.5 .690 408-4756 1051644-1 1Coupling nut is passivated stainless steel. Straight Cable Jack, Solder 25.6 Ref. [1.007] A 16.6 [.654] Ref. Ref. Plane .250-36 UNS-2A Heat Shrink Tubing 6.4 [.250] Hex. Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Dimension A Instruction Sheet Part No. 55, 58, 141, 142, 223, 303, 400 Stainless, Gold No Solder 18.5 .730 408-4820 1051852-1 Bulkhead Cable Jack, Solder 31.10 [1.225] Ref. A 11.4 [.450] 9.50 [.374] Ref. Ref. Plane .250-36 UNS-2A 7.9 [.312] Hex. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. O 6.4 [.250] Min. 3.2 Max. [.125] Panel 6.0 Min. [.235] Shrink Tubing Recommended Mounting Hole Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Dimension A Instruction Sheet Part No. RG 55, 58, 141, 142, 300 Stainless, Gold No Solder 408-4817 1051861-1 174, 188, 316 Stainless, Gold No Solder 24.0 .945 21.0 .825 408-4817 1051942-1 104 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Flexible Cable (Continued) 16.9 [.666] Ref. Right-Angle Cable Plug, Solder 13.5 [.530] Ref. 10.5 [.413] Ref. Ref. Plane 7.9 [.312] Hex. A 25.9 [1.020] Ref. Heat Shrink Tubing Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Dimension A Instruction Sheet Part No. 55, 58, 141, 142, 223, 303, 400 Stainless, Gold1 Yes Solder 408-4816 1052063-1 174, 188, 316 Stainless, Gold1 Yes Solder 16.0 .630 11.2 .440 408-4815 1052067-1 1Coupling nut is passivated stainless steel. Straight Cable Plug, Clamp 19.0 [.750] Ref. A 7.9 [.312] Hex Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Dimension A Instruction Sheet Part No. 174, 188, 316 Stainless, Pass. Yes Solder 2.9 .116 408-4906 1050721-1 Straight Cable Jack, Clamp 17.8 [.700] Ref. A 7.9 [.312] Hex Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Dimension A Instruction Sheet Part No. 174, 188, 316 Stainless, Pass. Yes Solder 2.9 .116 408-4906 1050903-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 105 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Flexible Cable (Continued) 22.6 [.890] Max. Bulkhead Feedthrough Cable Jack, Clamp 11.4 [.450] Ref. Plane 9.5 [.374] Ref. 6.0 [.235] Min. 7.9 [.312] Hex. .250-36, UNS-2A Cable Type RG/U 174, 188, 316 O 6.4 Min. [.250] 3.2 Max. [.125] Panel Body Material & Finish Stainless, Pass. Recommended Mounting Hole Contact Captivation Yes Contact Attachment Solder Instruction Sheet 408-4704 Part No. 1050996-1 Instruction Sheet 408-4965 Part No. 1051140-1 16.9 [.665] Ref. Right-Angle Cable Plug, Clamp 12.9 [.509] Ref. 10.0 [.392] Ref. Ref. Plane 18.0 [.710] Max. 14.3 [.562] Max. 7.9 [.312] Hex. Cable Type RG/U 174, 188, 316 Body Material & Finish Stainless, Pass. Contact Captivation Mechanical Contact Attachment Solder 25.4 [1.00] Ref. 22.4 [.883] Ref. Straight Cable Plug, Crimp Ref. Plane 7.9 [.312] Hex. Body Material & Finish 174, 179, 187, 188, 316 RD316 55, 142, 223, 400 174, 179, 187, 188, 316 Stainless, Pass. Mechanical Solder/Crimp2 Stainless, Pass. Stainless, Pass. Brass, White Bronze Mechanical Mechanical Solder/Crimp2 Solder/Crimp2 Mechanical Solder/Crimp2 1055236-1 1Use 2Use Contact Captivation Contact Attachment Crimp Tooling Part No. Cable Type RG/U Instruction Sheet Part No. 1055236-1 408-4661 1056443-1 1055236-11 1055236-1 408-4661 408-4661 1056436-1 1056438-1 408-4661 1082034-1 die 1055270-1 to crimp RD316 ferrule. die 1055880-1 to crimp center contact. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 106 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Flexible Cable (Continued) Straight Cable Jack, Crimp 33.1 Ref. [1.304] 21.3 [.837] Ref. 19.3 [.761] Ref. Ref. Plane 6.35 Hex. [.250] 27.43 Max. [1.080] .250-36 UNS-2A 6.4 Hex. [.250] 7.9 Hex. [.312] Style A Style B Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Crimp Tooling Part No. 174, 316 58, 141, 303 174, 188, 316 178, 196 Brass, Nickel Stainless, Pass. Stainless, Pass. Stainless, Pass. Mechanical Mechanical Mechanical Mechanical Solder Solder Solder Solder 1055236-1 1055236-1 1055236-1 1Refer Heat Shrink Tubing 1 Instruction Sheet Style Part No. 408-4032 408-4704 408-4708 408-4806 A B B B 5447648-3 1051867-1 1051855-1 1051869-1 to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule crimp. Bulkhead Feedthrough Cable Jack, Crimp 26.4 Ref. [1.040] 11.4 [.450] 6.4 Dia. [.250] Min. Lock Washer .250-36 UNS-2A 6.0 Min. [.235] 3.2 Max. [.125] Panel 7.9 [.312] Hex Recommended Mounting Hole Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Crimp Tooling Part No. Instruction Sheet Part No. 174, 179, 187, 188, 316 RD316 58, 141, 303 55, 142, 223, 400 174, 188, 316 Stainless, Pass. Mechanical Solder/Crimp2 1055236-1 408-4661 1056452-1 Stainless, Pass. Stainless, Pass. Mechanical Mechanical Solder/Crimp2 Solder/Crimp2 1055236-13 1055236-1 408-4661 408-4661 1056445-1 1056450-1 Stainless, Pass. Mechanical Solder/Crimp2 1055236-1 408-4661 1056447-1 Brass, Nickel Mechanical Crimp 1 408-4032 5448103-2 1Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule crimp. die 1055880-1 to crimp center contact. 3Use die 1055270-1 to crimp RD316 ferrule. 2Use DANIELS is a trademark of Daniels Manufacturing Corporation. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 107 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Flexible Cable (Continued) 16.9 [.665] Ref. Right-Angle Cable Plug, Crimp 13.5 [.530] Ref. 10.5 [.413] Ref. Ref. Plane 20.4 [.802] Ref. 7.9 [.312] Hex. 17.2 [.677] Ref. Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Crimp Tooling Part No. Instruction Sheet 174, 179, 187, 188, 316 58, 141, 303 Stainless, Pass. Mechanical Solder 1055236-1 408-4659 1056462-1 Stainless, Pass. Mechanical Solder 1055236-1 408-4659 1056456-1 Right-Angle Cable Plug, Crimp Part No. 16.9 Ref. [.665] 13.4 Ref. [.530] 12.1 [.475] Ref. 7.9 Hex [.312] 27.0 Ref. [1.062] Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Crimp Tooling Part No. Instruction Sheet Part No. 55, 142, 223, 400 174, 188, 316 178, 196 Stainless, Pass. Epoxy Solder 1055236-1 408-4681 1052072-1 Stainless, Pass. Stainless, Pass. Epoxy Epoxy Solder Solder 1055236-1 1055236-1 408-4683 408-4801 1052076-1 1052098-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 108 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Flexible Cable (Continued) Straight Push-On 31.50 Ref. [1.240] Ref. Plane 6.35 Min. [.250] Plug Sleeve Clearance Area 27.61 [1.087] Ref. 5.08 0.13 [.200 .005] Thread Length 5.49 Max. [.216] O 12.70 [.500] Cable Type RG/U 316 Body Material & Finish Beryllium Copper, Gold Contact Captivation Mechanical Contact Attachment Crimp Right-Angle Push-On 27.97 Ref. [1.101] Ref. Plane 6.35 Min. [.250] Plug Sleeve Clearance Area 20.65 [.813] Ref. 5.08 0.13 [.200 .005] Thread Length 5.49 Max. [.216] O 12.70 [.500] 14.15 Ref. [.557] Cable Type RG/U 316 Part No. 1408541-1 Body Material & Finish Beryllium Copper, Gold 17.32 Ref. [.682] Contact Captivation Mechanical Contact Attachment Solder/Crimp Part No. 1274694-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 109 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Direct Solder Attachment, Semi-Rigid Cable Straight Cable Plug 5.4 Ref. [.213] O 3.66 [.144] 8.40 [.330] Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment Solder Assembly Kit Part No. Instruction Sheet Part No. 402 (3.58 [.141]) Stainless, Pass. No Center Contact No Center Contact 1055420-1 408-4761 1050757-1 Solder Assembly Kit Part No. 1055420-1 1055420-1 Instruction Sheet Part No. 408-4764 408-4765 1050525-1 1050770-1 N/A -- 1050542-1 1055420-1 -- 1050548-1 Instruction Sheet Part No. 408-4767 408-4833 1050854-1 1050859-1 Straight Cable Plug O 3.67 [.144] RG402/U O 2.26 [.089] RG405/U 8.1 Ref. [.320] 11.2 [.440] Ref. O 4.6 [.180] Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) 405 (2.16 [.085]) Stainless, Gold1 Stainless, Gold1 402 (3.58 [.141]) Stainless, Gold1 405 (2.16 [.085]) Stainless, Gold1 No No No Center Contact No Solder Solder No Center Contact Solder 1Coupling nut is passivated stainless steel. Straight Cable Jack 12.7 [.500] O 3.66 [.144] RG402/U O 2.26 [.089] RG405/U 10.8 Ref. [.424] Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) 405 (2.16 [.085]) Stainless, Gold Stainless, Gold No No Solder Solder Solder Assembly Kit Part No. 1055420-1 1055420-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 110 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Direct Solder Attachment, Semi-Rigid Cable (Continued) 19.0 [.748] Bulkhead Cable Jack 12.7 [.500] 10.5 [.415] O 3.66 [.144] RG402/U O 2.26 [.089] RG405/U 8.6 [.339] Ref. 6.0 Min. [.235] O 6.4 Min. [.250] O 4.6 [.180] 2.4 Max [.093] Panel Recommended Mounting Hole Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) Brass, Gold No Solder 2 Hole Flange Mount Cable Jack Solder Assembly Kit Part No. 1055420-1 Instruction Sheet Part No. 408-4768 1082029-1 14.2 [.560] 9.5 [.375] 7.6 Ref. [.299] 5.7 [.223] 1.7 [.065] O 3.66 [.144] RG402/U O 2.26 [.089] RG405/U 12.2 [.481] O 15.9 [.625] .250-36 UNS-2A O 2.6 2 Plcs. [.102] Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) 405 (2.16 [.085]) Stainless, Gold Stainless, Gold No No Solder Solder 4 Hole Flange Mount Cable Jack Solder Assembly Kit Part No. 1055420-1 1055420-1 O 3.66 [.144] RG402/U O 2.26 [.089] RG405/U 7.6 Ref. [.299] Instruction Sheet Part No. 408-4767 408-4883 1051052-1 1051046-1 O 2.6 4 Plcs. [.102] 8.6 2 Plcs. [.340] 9.5 [.375] 12.7 Sq. [.500] 14.2 [.560] Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) 405 (2.16 [.085]) Stainless, Gold Stainless, Gold No No Solder Solder Solder Assembly Kit Part No. 1055420-1 1055420-1 Instruction Sheet Part No. 408-4767 408-4883 1051081-1 1051085-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 111 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Semi-Rigid Cable Right-Angle Cable Plug, Direct Solder Attachment 17.1 [.675] Ref. 13.6 [.535] Ref. 10.5 [.413] Ref. Ref. Plane 7.9 [.312] Ref. 7.9 [.312] Hex. O 3.66 [.144] RG402/U O 2.26 [.089] RG405/U Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) 405 (2.16 [.085]) 405 (2.16 [.085]) Stainless, Gold1 Stainless, Gold1 Brass, Gold Epoxy Epoxy Mechanical Solder Solder Solder 1Coupling Solder Assembly Kit Part No. 1055420-1 1055420-1 1055420-1 Instruction Sheet Part No. 408-4831 408-4831 408-4831 1051151-1 1051157-1 1088312-1 Instruction Sheet Part No. 408-4695 1050598-1 408-4690 1050740-1 Instruction Sheet Part No. 408-4696 408-4697 1050602-1 1050611-1 nut is passivated stainless steel. Straight Cable Plug, Crimp 9.8 Ref. [.387] 6.9 [.270] RG402/U Ref 7.1 [.278] RG405/U O 3.63 [.143] RG402/U O 2.26 [.089] RG405/U Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 405 (2.16 [.085]) Stainless, Pass. Solderless 402 (3.58 [.141]) Stainless, Pass. Mechanical No Center Contact Crimp Tooling Part No. 1055835-1 Solderless 1055835-1 Straight Cable Plug -- Low Profile, Crimp O 3.66 [.144] RG402/U O 2.26 [.089] RG405/U 5.8 Ref. [.229] 8.6 Ref. [.337] Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) 405 (2.16 [.085]) Stainless, Pass. Stainless, Pass. Mechanical Mechanical Solderless Solderless Crimp Tooling Part No. 1055835-1 1055835-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 112 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Semi-Rigid Cable (Continued) 2 Hole Flange, Crimp 16.70 Max. [.657] After Crimping 14.50 Ref. [.569] After Crimping 6.00 [.235] OSM Jack 6.30 Dia. [.250] Min. 7.90 Hex. [.312] 11.10 Hex. [.437] Recommended Mounting Hole 8.60 Ref. [.339] Ref. Plane Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) 405 (2.16 [.085]) Stainless, Pass. Stainless, Pass. Mechanical Mechanical Solderless Solderless Crimp Tooling Part No. 1055835-1 1055835-1 Instruction Sheet Part No. 408-4954 408-4689 1051005-1 1051007-1 Instruction Sheet Part No. 408-4691 408-4692 1051145-1 1051147-1 Right-Angle Cable Plug, Crimp 15.8 [.622] Ref. 12.6 [.497] Ref. 9.7 [.383] Ref. Ref. Plane 14.43 [.568] After Crimping 7.9 [.312] Hex. O 3.63 [.143] RG402/U O 2.26 [.089] RG405/U 11.25 [.443] Ref. After Crimping Cable Type RG/U Body Material & Finish Contact Captivation Contact Attachment 402 (3.58 [.141]) 405 (2.16 [.085]) Stainless, Pass. Stainless, Pass. Mechanical Mechanical Solderless Solderless Crimp Tooling Part No. 1055835-1 1055835-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 113 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Panel Mount, Solder Pot Terminal 4 Hole Flange Mount Plug Receptacle 12.9 Ref. [.507] 12.7 Sq. [.500] 18.0 Ref. [.707] 8.6 Typ. 6.4 Dia. [.340] [.250] Min. 1.7 [.065] 1.3 Dia. [.050] 7.9 Hex [.312] Body Material & Finish Stainless, Passivated 4 Hole Flange Mount Jack Receptacle Contact Captivation Epoxy RF Leakage db min. N/A 14.6 [.575] 9.5 [.375] 1.7 [.065] Temperature Range -65 to 125 C 8.6 Typ. [.340] O 1.3 [.050] O 2.6 4 Plcs. [.102] 7.6 [.299] Ref. Plane Body Material & Finish Stainless, Passivated Part No. 1052324-1 12.7 [.500] Sq. O 0.9 [.035] .250-36UNS-2A 2 Hole Flange Mount Jack Receptacle 2.6 Dia. [.102] 4 Plcs. Contact Captivation Epoxy RF Leakage db min. -(60-fGHz) Temperature Range -65 to 125 C Part No. 1052422-1 14.6 [.575] 9.5 [.375] 1.7 [.065] 5.7 Typ. [.223] 0.8 Dia. [.031] Min. 15.9 12.2 [.625] [.481] 1.3 Dia. [.050] 2.6 Dia. [.102] 2 Plcs. Body Material & Finish Stainless, Passivated Contact Captivation Epoxy RF Leakage db min. -(60-fGHz) Part No. 1052544-1 14.6 [.575] 2 Hole Flange Mount Jack Receptacle 9.5 [.375] 0.8 [.030] 7.6 [.299] Ref. Ref. Plane 1.7 [.065] O 0.8 [.031] .250-36 UNS-2A Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Temperature Range -65 to 125 C Body Material & Finish Stainless, Passivated Contact Captivation Epoxy O 1.3 [.050] 5.7 [.223] 12.2 [.481] O 15.9 [.625] O 4.1 [.162] RF Leakage db min. -(60-fGHz) O 2.6 2 Plcs. [.102] Temperature Range -65 to 125 C Part No. 1052534-1 114 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Panel Mount Bulkhead Feedthrough Jack Receptacle, Solder Pot Terminal 17.0 [.668] 6.0 Min. [.235] 6.4 Min. [.250] 12.7 [.500] 1.6 [.062] 1.3 Dia. [.050] Recommended Mounting Hole Body Material & Finish Stainless, Passivated 4.1 Dia. [.162] 7.9 Hex. [.312] Contact Captivation Epoxy RF Leakage db min. N/A Press-In Jacks, Straight Terminal Temperature Range -65 to 125 C Part No. 1053092-1 0.03 O 0.50 +- 0.07 + .001 [.020 - .003 ] O 5.50 Ref. [.217] O 8.50 0.60 [.335 .024] 2.50 0.20 [.098 .008] 6.10 0.10 [.240 .004] 10.10 0.10 [.398 .004] 8.90 0.20 [.350 .008] Part Number 1460468 0.40 3.50 +- 0.20 1.10 0.10 [.043 .004] 0.00 O 1.00 +- 0.10 + .000 [.039 - .004 ] + .016 [.138 - .008 ] 2.00 0.10 [.079 .004] 4.50 0.10 [.177 .004] 14.10 0.20 [.555 .008] 5.00 [.197 0.10 .004] 0.02 5.05 +- 0.03 0.10 O 8.00 +- 0.20 + .004 [.315 - .008 ] + .0008 [.199 - .0012 ] Part Number 1460469 Body Material & Finish Brass, White Bronze Brass, Gold Press-In Cable, Jack Panel Contact Captivation Mechanical Mechanical RF Leakage db min. N/A N/A Temperature Range -65 to 125 C -65 to 125 C Part No. 1460468-1 1460469-1 22.40 [.882] 11.00 0.10 [.433 .004] 1.50 0.10 [.059 .004] 4.00 0.10 [.157 .004] 9.60 0.10 [.378 .004] 1/4" - 36 UNS-2A O 13.00 0.10 [.512 .004] 0.05 O 7.40 +- 0.03 + .002 [.291 - .001 ] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Cable Type RG/U 316 D Body Material & Finish Brass, Gold 0.03 O 7.00 +- 0.01 + .0010 [.276 - .0004 ] Contact Captivation Mechanical Recommended Mounting Hole Temperature Range -65 to 125 C Part No. 619115-1 115 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Panel Mount, Straight Terminal 4 Hole Flange Mount Jack Receptacle 27.43 0.25 [1.080 0] 9.5 [.375] .250-36 UNS-2A 12.7 [.500] Sq. 14.99 0.25 [.590 0] 1.7 [.065] 8.6 Typ. [.340] O 1.3 [.050] O 4.1 [.162] Body Material & Finish Stainless, Passivated Stainless, Passivated Stainless, Gold 2 Hole Flange Mount Plug Receptacle O 2.6 4 Plcs. [.102] 7.6 Ref. [.299] Ref. Plane Contact Captivation None Epoxy Epoxy RF Leakage db min. -(100-fGHz) -(60-fGHz) -(60-fGHz) Temperature Range -65 to 165 C -65 to 125 C -65 to 125 C Part No. 1052518-1 1052523-1 1052522-1 25.3 Ref. [.995] 8.4 [.330] 12.9 Ref. [.507] 6.6 [.260] 1.7 [.065] 12.2 [.481] 4.1 [.162] 7.9 Hex [.312] Body Material & Finish Stainless, Passivated 15.9 [.625] 1.3 Dia. [.050] 2.6 Dia. [.102] 2 Plcs. Contact Captivation Epoxy RF Leakage db min. -(60-fGHz) Temperature Range -65 to 125 C Part No. 1052349-1 27.43 0.25 [1.080 0] 2 Hole Flange Mount Jack Receptacle 9.5 [.375] 14.99 0.25 [.590 0] 1.7 [.065] 5.7 [.223] O 1.3 [.050] 12.2 [.481] .250-36 UNS-2A 7.6 Ref. [.299] Ref. Plane Body Material & Finish Stainless, Passivated O 15.9 [.625] O 4.1 [.162] Contact Captivation Epoxy O 2.6 2 Plcs. [.102] RF Leakage db min. -(60-fGHz) Temperature Range -65 to 125 C Part No. 1052552-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 116 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Panel Mount, Straight Terminal (Continued) Bulkhead Feedthrough Jack Receptacle 12.7 [.500] 4.1 [.160] 10.82 [.426] Ref. Ref. Plane 1.9 [.076] O 1.3 [.050] .250-36 UNS-2A 7.9 [.312] Hex. Body Material & Finish Stainless, Passivated 2 Hole Flange Mount Right-Angle Jack Receptacle Lockwasher Contact Captivation Epoxy RF Leakage db min. -(60-fGHz) Temperature Range -65 to 125 C 11.1 0.13 [.437 .001] 15.0 0.25 [.590 .010] 12.2 [.481] 1.3 [.050] 11.6 [.458] 4.1 [.162] Body Material & Finish Stainless, Passivated Contact Captivation Mechanical Temperature Range -65 to 165 C Part No. 1052986-1 17.91 0.25 [.705 .010] 14.99 0.25 [.590 .010] 1.7 [.065] 5.7 [.223] O 2.6 2 Plcs. [.102] RF Leakage db min. -(90-fGHz) 12.83 0.25 [.505 .010] 9.65 0.25 [.380 .010] Part No. 1053222-1 O 15.9 [.625] 7.9 0.25 [.312 .010] 1.7 [.065] 4 Hole Flange Mount Right-Angle Jack Receptacle O 4.1 [.162] O 2.6 4 Plcs. [.102] O 4.1 [.162] 12.7 [.500] Sq. 9.7 11.6 [.382] Ref. [.458] O 1.3 [.050] 8.6 Typ. [.340] .250-36 UNS-2A Ref. Plane Body Material & Finish Stainless, Passivated Stainless, Passivated Contact Captivation Mechanical Mechanical RF Leakage db min. -(90-fGHz) -(90-fGHz) Temperature Range -65 to 165 C -65 to 165 C Part No. 1052978-1 1052982-1 Note: Part Numbers are RoHS compliant except: lIndicates non-RoHS compliant. 117 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Panel Mount 4 Hole Flange Mount Jack Receptacle, Straight Terminal 9.5 [.375] 1.7 [.065] 12.7 [.500] Sq. 1.3 [.050] 8.6 [.340] Typ. Slot Width O 1.3 [.050] .250-36 UNS-2A Body Material & Finish Contact Captivation Stainless, Passivated Epoxy 4 Hole Flange Mount Plug Receptacle, Tab Terminal Slot Width +.076/-.025 [+.003/-.001] 0.5 [.018] Temperature Range Part No. -(60-fGHz) -65 to 125 C 1052563-1 0.1 [.005] Thk. X 1.2 Wide [.050] Tab 1.7 [.065] 12.9 Ref. [.507] Tab Width 1.3 [.050] 9.5 [.375] O 2.6 4 Plcs. [.102] 12.7 Sq. [.500] 2.5 [.100] Contact Captivation Epoxy 4 Hole Flange Mount Jack Receptacle, Tab Terminal RF Leakage db min. 8.6 [.340] Typ. 9.9 Ref. [.390] Body Material & Finish Stainless, Passivated O 2.6 4 Plcs. [.102] 7.6 [.299] Ref. Ref. Plane 2.5 [.100] RF Leakage db min. -(60-fGHz) Temperature Range -65 to 125 C 12.7 Sq. [.500] 8.6 2 Plcs. [.340] 1.7 [.065] 0.13 [.005] Thk. X 0.5 Wide [.020] Tab 7.6 Ref. [.299] Body Material & Finish Stainless, Passivated Contact Captivation Epoxy Tab Width .51 [.020] Part No. 1052360-1 O 2.6 4 Plcs. [.102] RF Leakage db min. -(60-fGHz) Temperature Range -65 to 125 C Part No. 1052898-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 118 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) 2 Hole Flange Mount Jack Receptacle, Panel Mount, Tab Terminal 9.5 [.375] 2.5 [.100] 5.7 [.223] 1.7 [.065] 0.13 [.005] Thk. X 1.27 Wide [.050] Tab 12.2 [.481] O 15.9 [.625] .250-36UNS-2A 7.59 [.299] Ref. Ref. Plane Body Material & Finish Stainless, Passivated 4 Hole Flange Mount Jack Receptacle, for Microstrip Transmission Line Circuits Contact Captivation Epoxy Horizontal Tab O 2.6 [.102] 2 Plcs. RF Leakage db min. -(60-fGHz) Temperature Range -65 to 125 C Part No. 1052577-1 9.5 [.375] 7.59 [.299] Ref. Ref. Plane 1.7 [.065] 12.7 [.500] Sq. 3.2 [.125] 8.6 [.340] Typ. 0.3 [.010] 2.2 [.085] .250-36 UNS-2A Body Material & Finish Stainless, Passivated 4.4 [.175] Contact Captivation Epoxy 2 Hole Flange Mount Jack Receptacle, for Microstrip Transmission Line Circuits 9.5 [.375] 1.7 [.065] O 2.6 4 Plcs. [.102] RF Leakage db min. -(60-fGHz) Temperature Range -65 to 125 C 3.2 [.125] 5.7 [.223] 1.2 [.049] O 0.3 [.010] .250-36 UNS-2A Ref. Plane Body Material & Finish Stainless, Passivated Contact Captivation Epoxy Part No. 1052528-1 12.2 [.481] O 15.9 [.625] O 2.2 [.085] 7.6 [.299] Ref. RF Leakage db min. -(60-fGHz) O 2.6 2 Plcs. [.102] Temperature Range -65 to 125 C Part No. 1052902-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 119 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) Field Replaceable Hermetic Launchers (Continued) 4 Hole Flange Mount Jack Receptacle with EMI/RFI Gasket EMI Gasket Accepts Pin Dia. A .250-36UNS-2A 12.7 Ref. [.500] Ref. Plane 7.6 Ref. [.299] 0.1 Ref. [.005] 1.7 [.065] O 2.6 4 Plcs. [.102] 9.5 [.375] Material & Finish Stainless, Passivated 4 Hole Flange Mount Jack Receptacle without EMI/RFI Gasket 8.6 2 Plcs. [.340] 9.5 [.375] Captivation Mechanical Pin Diameter A .38 [.015] Part No. 1052684-1 12.7 Sq. [.500] 1.7 [.065] 8.6 2 Plcs. [.340] Accepts Pin Dia. A 7.6 Ref. [.299] Material & Finish Stainless, Passivated 2 Hole Flange Mount Jack Receptacle with EMI/RFI Gasket O 2.6 4 Plcs. [.102] Captivation Mechanical Pin Diameter A .91 [.036] 1.7 [.065] 9.5 [.375] Part No. 1052643-1 5.6 [.222] 0.1 Min. [.005] EMI Gasket 12.2 [.481] O 15.9 [.625] Accepts Pin Dia. A .250-36 UNS-2A 7.6 Ref. [.299] Ref. Plane Material & Finish Stainless, Passivated Stainless, Passivated Stainless, Passivated 2 Hole Flange Mount Jack Receptacle without EMI/RFI Gasket, Field Replaceable Hermetic Launchers 9.5 [.375] Captivation Mechanical Mechanical Mechanical 1.7 [.065] O 2.6 2 Plcs. [.102] Pin Diameter A .30 [.012] .38 [.015] .46 [.018] Part No. 1052628-1 1052689-1 1052634-1 5.7 [.223] O 2.6 2 Plcs. [.102] 12.2 O 15.9 [.481] [.625] 7.6 [.299] Material & Finish Stainless, Passivated Stainless, Passivated Accepts Pin Dia A Captivation Mechanical Mechanical Pin Diameter A .51 [.020] .91 [.036] Part No. 1052652-1 1052646-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 120 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) 13.5 [.530] PC Board Mount Vertical Jack 5.1 2 Plcs. [.200] 9.5 [.375] 7.6 [.299] Ref. Ref. Plane 3.9 Ref. [.155] 6.3 Sq. [.250] 5.1 Typ. [.200] O 1.3 [.050] O 1.7 5 Plcs. [.067] Recommended Mounting Holes 1.0 Sq. [.040] 4 Plcs. .250-36 UNS-2A Style 1 19.94 [.785] 9.53 0.13 [.375 .005] 12.70 [.500] 5.28 [.203] 6.35 0.13 [.250 .005] 6.35 0.13 [.250 .005] 12.70 [.500] 1.27 0.03 [.050 .001] O 0.63 3 Plcs. [.025] Style 2 Style 3 Material & Finish Stainless, Gold Brass, Gold Brass, Gold Brass, Nickel Plate PC Board Mount Right-Angle Jack 6.35 0.25 [.250 0] Style No. 1 2 2 3 13.5 [.530] 3.9 Ref. [.155] 0.5 [.020] Typ. 11.6 [.458] Part No. 1053354-1 221789-1 221789-3 6274096-1 9.7 [.382] Ref. 6.4 Sq. [.250] O 1.3 [.050] 1.0 Sq. [.040] 4 Plcs. Ref. Plane 2.8 [.110] Typ. 5.1 Typ. [.200] 5.1 2 Plcs. [.200] Style 1 15.24 Max. [.600] 11.68 [.460] 1.93 .05 [.076 .002] O 1.7 5 Plcs. [.067] 6.35 [.250] Recommended Mounting Holes 9.65 Max. [.380] 4.60 Min. [.181] Dia. 1.02 .05 Typ. [.040 .002] 1.27 .03 Dia. [.050 .001] 3.94 [.155] Style 2 Material & Finish Stainless, Gold Stainless, Gold Style No. 1 2 Part No. 1053378-1 221790-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 121 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) In-Series Adapter, Jack to Jack 8.8 [.348] Ref. Ref. Plane Ref. Plane 5.5 Across Flats [.218] 3.2 [.125] 12.7 [.500] Frequency DC-18.0GHz Material & Finish Stainless, Gold Captivation Epoxy* Part No. 1053488-1 22.2 Ref. [.875] In-Series Adapter, Plug to Plug 3.2 [.125] 5.5 Across Flats [.218] 7.9 Hex [.312] Frequency DC-18.0GHz Material & Finish Stainless, Passivated Captivation Epoxy* Part No. 1053635-1 *All adapters listed above employ epoxy captivation. Mechanically captivated versions are also available. Please consult Tyco Electronics. In-Series Adapter, Jack to Plug, Right-Angle 15.9 Ref. [.625] 7.9 [.312] Hex 12.7 [.500] 14.8 [.583] 11.6 [.458] Frequency DC-12.4GHz Material & Finish Stainless, Passivated Captivation Mechanical Part No. 1055065-1 11.7 [.459] In-Series Adapter, Jack to Jack, Right-Angle 9.7 [.383] Ref. 11.7 [.459] 9.7 [.383] Ref. Ref. Plane .250-36 UNS-2A Ref. Plane Frequency DC-12.4GHz Material & Finish Stainless, Passivated Captivation Mechanical Part No. 1055018-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 122 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMA Connectors (Continued) 14.0 Ref. [.550] In-Series Adapter, Plug to Plug, Right-Angle 11.1 [.438] Ref. Ref. Plane 11.1 [.438] 14.0 Ref. [.550] Ref. 7.9 Hex. [.312] Ref. Plane Frequency DC-18.0GHz Material & Finish Stainless, Passivated Captivation Mechanical Part No. 1055047-1 18.3 Ref. [.720] In-Series Adapter, Jack to Plug, Connector Saver 13.3 Ref. [.524] Ref. Plane .250-36 UNS-2A 5.6 Across Flats [.219] 7.9 Hex. [.312] Frequency DC-18.0GHz In-Series Adapter, Jack to Jack, Bulkhead Feedthrough Ref. Plane Material & Finish Stainless, Passivated Captivation Epoxy Part No. 1054426-1 22.2 [.875] 14.6 [.575] 1.7 [.065] Lock Washer .250-36 UNS-2A 6.4 Max Panel [.250] 6.0 [.235] Min. .250-36 UNS-2A 9.5 [.375] Hex. 7.9 Hex. [.312] 18.4 Ref. [.723] Ref. Plane Frequency DC-18.0GHz O 6.4 [.250] Min. Recommended Mounting Hole Ref. Plane Material & Finish Stainless, Passivated Captivation Epoxy* Part No. 1054869-1 *Mechanically captivated version available. Please consult Tyco Electronics. Test Adapter, Plug to Jack, Quick Release 5.50 Across Flats [.215] Reference Plane 23.00 Ref. [.905] Reference Plane OSM Jack O 12.70 O 10.20 [.400] [.500] 24.90 Ref. [.982] OSM Plug Retaining Ring .250-36 UNS-2A 28.60 Ref. [1.125] Frequency DC-18.0GHz Material & Finish Stainless, Passivated Captivation Epoxy Part No. 1053780-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 123 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors QMA Connectors Snap-On SMA Series of RF Connectors Product Facts Positive snap-on interface facilitates assembly Intermateable with competitor product Excellent RF performance to 6 GHz Ideal for Communications and Industrial Applications Material and Finish Shells and Bodies -- Brass, nickel plated Collars -- Phosphor bronze, white bronze plated Outer Contacts -- Beryllium copper, nickel plated Center Contacts -- Beryllium copper, gold plated Dielectrics -- PTFE Electrical Characteristics Tyco Electronics' next generation high performance RF products QMA (Snap-On SMA) connectors series offers the same high quality and performance currently found in the standard Tyco Electronics SMA series but does not require the coupling nut torque. By integrating a snap-on feature to the design, denser packaging can be achieved, and the overall applied cost is dramatically reduced. The QMA connector series is excellent for communications as well as industrial applications. The QMA offering is designed for 100 mating cycles, operates through 6 GHz, and is completely intermateable with competitive QMA offerings. This new QMA product is not intermateable with standard SMA interfaces. QMA connectors are available in a broad range of standard configurations, including PCB and panel mount, flexible and semirigid cable, and adapters. Other options can be reviewed as well, including additional cable sizes, PCB surface mounting, and tape and reel packaging. The QMA connector series is a cost effective solution for the challenging demands of today's commercial marketplace, with applications including cellular base station, handsets, and test and measurement. Call your local sales office or authorized distributor for additional information or samples of the QMA connector series. Tyco Electronics is a leading supplier of RF and Microwave connectors and cable assemblies, and provides advanced technology products from well known and industry leading brands, including AMP and M/A-COM. Frequency -- dc - 6 GHz Nominal Impedance -- 50 ohms Voltage Rating -- 335 Volts (VRMS max.) @ Sea Level VSWR -- 1.15 : 1 max. @ 6 GHz Insulation Resistance -- 5,000 megohms min. Insertion Loss -- .25 dB Max @ 6 GHz Dielectric Withstanding Voltage -- 1000 Volts (VRMS max.) @ Sea Level Contact Resistance -- Center Contact -- 5 milliohms max. Outer Contact -- 4 milliohms max. Mechanical Characteristics Connector Durability -- 100 mating cycles Force to Engage -- 27 Newtons Force to Disengage -- 20 Newtons Retention Force (mated pair) -- 60 Newtons min. Cable Retention -- Dependent upon cable type Environmental Characteristics Temperature Rating -- -40 to +125C Vibration -- EIA-364-28, Test Condition VII, Condition D Shock -- EIA-364-27, Method H Moisture Resistance -- EIA-364-31, Method III Thermal Shock -- EIA-364-32 Note: Performance specifications are typical, but may not apply to all connector types. Related Product Data QMA Snap-On Interface SMA Threaded Interface Product Specifiation -- 108-2087 Sample Kit -- 1654882 Board 124 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors QMA Connectors (Continued) Semi-Rigid Cable -- Direct Solder Attachment Straight Cable Plug 20.50 Ref. [0.81] Cable RG 402 Part Number 1408346-1 Cable RG 402 Part Number 1408347-1 Cable RG 402 Part Number 1408348-1 Cable RG 402 Part Number 1408349-1 O 10.50 [0.41] Right-Angle Cable Plug 15.10 Ref. [0.60] 18.70 Ref. [0.74] 8.71 [0.34] O 10.50 [0.41] 10.24 [0.40] 14.60 Ref. [0.57] 23.05 [0.91] Straight Cable Jack 18.05 [0.71] O 8.00 [0.31] O 5.60 [0.22] 16.05 [0.63] 3.20 Max. Panel [0.13] Bulkhead Cable Jack 7.00 [0.28] 2.00 [0.08] O 7.20 Min. [0.28] O 5.60 [0.22] 6.46 Across Flat [0.25] 9.50 Hex. [0.38] 9.50 Hex. [0.38] 6.50 [0.26] Min. Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 125 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors QMA Connectors (Continued) Flexible Cable -- Crimp Attachment A Ref. Cable RG 174, 188, 316 Straight Cable Plug Dim. A 22.90 0.90 22.90 0.90 25.20 0.99 25.20 0.99 RD 316 RG 400 O 10.50 [0.41] RG 58 18.70 Ref. [0.74] 15.10 Ref. [0.60] 9.10 Ref. [0.36] Plane Right-Angle Cable Plug Cable RG 174, 188, 316 RD 316 RG 400 RG 58 Dim. A 17.20 0.68 17.20 0.68 19.50 0.77 19.50 0.77 Dim. B 13.10 0.52 13.10 0.52 15.40 0.61 15.40 0.61 Part Number Part Number 1408333-1 1408333-3 1408333-5 1408333-7 8.71 [0.33] O 10.50 [0.41] A Ref. 1408336-1 B 1408336-3 1408336-5 1408336-7 Straight Cable Jack A Ref. 18.05 [0.71] Cable RG 174, 188, 316 Dim. A 25.90 1.02 25.90 1.02 28.20 1.11 28.20 1.11 RD 316 RG 400 RG 58 Bulkhead Cable Jack Part Number 1408338-1 1408338-3 O 8.00 [0.31] O 5.60 [0.22] 1408338-5 1408338-7 16.05 [0.63] 3.20 Max. Panel [0.13] Cable RG 174, 188, 316 A Ref. 2.00 [0.08] RD 316 RG 400 O 5.60 [0.22] RG 58 6.46 Across Flat [0.25] 9.50 Hex. [0.38] Dim. A 9.90 0.39 9.90 0.39 12.20 0.48 12.20 0.48 Part Number 1408339-1 1408339-3 1408339-5 1408339-7 9.50 Hex. [0.38] 6.50 Min. [0.26] O 7.20 [0.28] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Recommended Mounting Hole 126 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors QMA Connectors (Continued) Printed Circuit Board 15.10 [0.60] Straight Jack Receptacle 6.35 [0.25] Sq. 5.08 [0.20] Typ. 11.00 [0.43] O 1.27 [0.05] O 5.60 [0.22] Part Number 1408332-1 1.02 Sq. Typ. [0.04] 15.60 [0.61] Recommended Mounting Hole 6.35 [0.25] Sq. 5.08 [0.20] Typ. 13.60 [0.54] 9.50 [0.37] Right-Angle Jack Receptacle Part Number 1408337-1 5.08 [0.20] Typ. O 1.70 Typ. [0.07] 5.08 [0.20] Typ. O 1.70 5 Plcs. [0.07] 1.02 Sq. Typ. [0.04] 12.40 [0.49] Recommended Mounting Hole 5.60 [0.22] Dia. 9.95 [.392] Straight Terminal Press-In Jack 5.00 [.197] 0.75 0.05 [.030 .002] 4.50 [.177] 2.00 [.079] 1.20 [.047] 4.00 [.157] Body Material & Finish Brass, Gold Contact Captivation Mechanical RF Leakage db min. N/A O 6.83 0.03 [.269 .001] Temperature Range -65 to 125 C Part No. 619215-1 Note: Part Numbers are RoHS compliant except: lIndicates non-RoHS compliant. 127 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors QMA Connectors (Continued) Straight Terminal 4-Hole Flange Mount Jack Receptacle 12.70 Sq. [0.50] 8.64 Typ. [0.34] 17.90 [0.70] 13.55 [0.53] 15.00 [0.60] 1.53 [0.06] O 5.60 [0.22] O 1.27 [0.05] O 4.06 [0.16] Part Number 1408341-1 O 2.60 [0.10] 4 Plcs. 20.00 [0.79] Screw-In Front Mount Jack Receptacle 10.70 [0.42] 1.50 [0.59] 4.10 [0.16] 1.90 [0.07] Part Number 1408340-1 O 1.27 [0.05] O 5.60 [0.22] O 4.06 [0.16] 8.00 Hex. [0.31] Adapters -- In Series .250 - 36 UNS-24 27.70 Ref. [1.09] QMA Plug to QMA Jack Part Number 1408342-1 QMA Jack QMA Plug Adapters -- Between Series 30.60 Ref. [1.20] QMA Plug to SMA Plug Part Number 1408393-1 SMA Plug QMA Plug 7.90 Hex. [0.31] 8.70 Hex. [0.34] 21.50 Ref. [0.85] QMA Jack to SMA Plug Part Number 1408343-1 SMA Plug QMA Jack Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 6.35 Hex. [0.25] 7.90 Hex. [0.31] 128 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3 (50 Ohm/75 Ohm) Miniature coaxial connectors series 1.0/2.3 (CECC 22230 and IEC 61169-29) coaxial connectors are devised to meet the requirements of compact electronic instrumentation. All plugs and jacks with Zo = 50 are designed for a number of different 50 and 75 cables. Owing to the large demand, the Series 1.0/2.3 has also been optimized as a 75 design into the GHz range. The different types of coupling mechanisms, such as screw on, slide-in and latching coupling permit space-saving installation. In addition, an extensive range of measurement accessories, adapters as well as terminations is available. The qualitydetermining factors have been established on the basis of corresponding measurements and test procedures in accordance with national and international standards for RF connectors (IEC 61169-1, MIL-C-39012 etc.). The reduced dimensions of all component parts of these connectors permit a compact hole spacing (installation pitch) of 6.8 [0.27] depending upon the corresponding cable diameters. High-quality materials ensure high reliability even in industrial atmospheres. The contact principle is the pin-socket principle and the contacts are gold plated to ensure perfect contact mating. The inner conductor parts are held in PTFE (Polytetrafluoroethylene). In most applications, the plug and jack belong to the same coupling type group. In special instances, such as for measurement purposes, different coupling types can be used together. The cable is connected by crimping the cable braid to the plug or jack body, the inner conductor is soldered or crimped. Between Series Adapters For Series 1.0/2.3 Adapters please see pages 251-260. 129 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3 (50 Ohm/75 Ohm) (Continued) Technical Data Type A Coupling Types Screw coupling; version with union nut Electrical and mechanical characteristics in accordance with CECC 22230 This type permits the plug and jack to be screwed together manually by means of a union nut secured to the plug. This is necessary for readily accessible locations, front panel test points and cable connections. Characteristic impedance -- 50 /75 Frequency range -- up to 10 GHz/ 2 GHz Reflection factor, referred to 50 cable1 -- up to 1 GHz, r 0.05 up to 4 GHz, r 0.07 up to 10 GHz, r 0.15 Reflection factor, referred to 75 cable1 -- up to 2 GHz, r 0.10 Insulation resistance -- initial value 1 G after stressing 200 M Screening effectiveness2 -- 90 dB Inner conductor contact resistance -- after stressing 10 m Outer conductor continuity -- after stressing 7.5 m Voltage proof3 -- flexible cables (RG 316) -- at sea level, 750 V, 50 Hz -- at 20 km altitude, 150 V, 50 Hz Working voltage3 -- flexible cables (RG 316) -- at sea level, 350 V, 50 Hz -- at 20 km altitude, 65 V, 50 Hz Service life -- 500 cycles Climatic category -- 40/85/21 Type C Slide-in coupling; version with centering ferrule In this type of coupling, the plug features a guide ferrule with a conical entry surface. This ensures that the floatable bulkhead plugs with cable connection make a reliable electrical connection to the rigid installed jack. Examples of this are single and multi-contact connections of slide-in applications. "W" denotes the allowed spacing of the mounting panel for satisfactory contact when the connection is made. Notes: 1 Guide values, depending on cable type and connector style. 2 Values apply to a straight screw and latching coupling with suitable cable. 3 Some cables suitable for use with these connectors have lower characteristic values than specified here. 4 For applicable cable types see page 151. Type F Latching coupling (Quick Lock) In this version, the cable plugs bear a funnel ferrule with built-in spring which snaps into a groove on the jack, simultaneously locking the connection. The connec- tion can be easily separated by lightly pulling the outer sleeve of the plug. This type of coupling can be used with a higher packing density, as the screw coupling. 130 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3, 50 Ohm Plugs, Solder/Crimp O 6.5 [0.26] 18.0 [0.71] Cable Coupling Type RG 316 A Cable Coupling Type WP93385L2 F Cable Coupling Type LMR 240 F O Max. 2.67 0.105 Part No. 1393670-1 1) 1) Detent for jack O 3.10 [.122] O 7.70 [.303] 24.64 [.970] O Max. 2.67 0.105 Part No. 619223-1 O 6.20 [.244] O 3.10 [.122] O 7.70 [.303] 24.64 [.970] O Max. 2.67 0.105 Part No. 619224-1 O Max. 6.3 0.248 1460010-1 O Max. 6.3 0.248 619085-1 O 6.20 [.244] O 4.15 [.163] O 7.90 Max. [.311] 28.50 Max. [1.122] Cable Coupling Type LMR 240FR F Cable Coupling Type WP93385L2 F Part No. O 7.90 [.311] O 3.10 [.122] O 7.90 Max. [.311] 25.50 Max. [1.004] Part No. O 6.20 [.244] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 131 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3, 50 Ohm (Continued) Bulkhead Jack, Solder/Crimp 17.0 [0.67] O 3.6 [0.14] O 1.7 [0.07] Cable Coupling Type RG 316 A, C, F O Max. 2.6 0.10 O 4.1 [0.16] Bulkhead Solder Jack O 7.3 [0.29] Part No. 4-1393670-4 O 4.1 [0.16] Coupling Type C, F Part No. 1393670-8 0.6 1.5 [0.02]...[0.06] Mounting Panel 8.0 [0.31] Vertical PC Board Mount Jack ECN0867 8.4 [0.33] 5.08 O 0.9 [0.2] [0.04] 6.0 [0.24] O 4.1 [0.16] Coupling Type 0.95 [0.04] C, F 0.5 [0.02] 11.1 [0.44] a Pitch 2.54 [0.10] O 1.5 [0.06] C, F Dim a 14.6 0.57 15.6 0.61 Part No. 3-1393670-4 3-1393670-5 Recommended Mounting Holes Vertical PC Board Mount Bulkhead Jack 19.5 [0.77] 16.0 [0.63] 0.5 [0.02] 0.95 [0.04] Coupling Type A, C, F M5.5x0.5 [0.22]x[0.02] Pitch 5.08 [0.2] O 0.9 [0.04] 6.0 [0.24] 12.0 [0.47] O 1.5 [0.06] Part No. 3-1393670-6 2.54 [0.10] Recommended Mounting Holes Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 132 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3, 50 Ohm (Continued) 15.9 [0.63] Right-Angle PC Board Mount Bulkhead Jack 5.9 [0.23] 7.0 [0.28] 7.3 [0.29] 7.4 [0.29] O 4.1 [0.16] O 0.55 [0.02] 0.55 [0.02] 3.7 3.3 [0.15] [0.13] 3.6 [0.14] Vertical PC Board Mount ACTION PIN Jack Coupling Type A, C, F M5.5x0.5 [0.22]x[0.02] Inner Conductor 15.00 [.591] 5.08 [.200] 5.28 [.208] O 1.00 0.08 [.039 .003] O 1.47 0.08 [.058 .003] 4 Plcs. Compliant Pin 4 Plcs. Center Contact Part No. 6274431-1 Coupling Type A, C, F Part No. 619107-1 Recommended Mounting Holes 5.20 [.205] 5.08 [.200] 6.00 [.236] 13.35 [.526] O 1.00 [.039] 5 Plcs. O 9.00 [.354] 5.08 [.200] M5.5 x 0.5 6.45 [.254] 3.18 0.05 [.125 .002] Recommended Mounting Holes 10.37 0.08 [.408 .003] 2.79 0.25 [.110 .010] Coupling Type A, C, F O 5.52 0.038 [.217 .001] Over Knurl Panel Mount, 4-Hole Flange, Launcher Jack 3.05 [.120] O 1.27 0.013 [.050 .0005] 17.91 [.705] 14.99 [.590] Part No. 1274449-1 O 7.62 0.05 [.300 .002] M5.5 x 0.5 Thread 12.95 0.08 [.510 .003] 1.65 [.065] 4.32 [.170] 12.70 Sq. [.500] 8.64 [.340] M5.5 x 0.5 Thread Front Mount, Bulkhead Jack Coupling Type A, C, F 5.00 [.197] 12.10 [.476] Coupling Type A, C, F O 4.06 [.160] O 1.27 [.050] Part No. 1274520-1 O 2.59 0.06 4 Plcs. [.102 .002] O 1.27 0.03 [.050 .001] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Coupling Type C, F 5.08 [.200] 23.35 [.919] Panel Mount, Press-in, Launcher Jack 2.54 [0.10] Recommended Mounting Holes ECN0870-G 6.10 4 Plcs. [.240] Pitch O 1.0 [0.04] Part No. 3-1393670-9 15.00 0.25 [.591 .010] 18.00 0.50 [.710 .020] Part No. 1274594-1 M5.5 x 0.5 Thread 0.80 [.032] 133 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3, 50 Ohm (Continued) Right-Angle PC Board Mount Bulkhead Jack 20.54 0.15 [.809 .006] 19.40 0.15 [.764 .006] 17.04 0.15 [.671 .006] 3.70 7.40 [.146] [.291] O 7.34 [.289] 7.00 [.276] 6.45 [.254] O 6.00 [.236] Part Number 1274544-1 Plating Coupling Type A, C, F 15.90 [.626] Pitch O 1.0 [0.04] 2.54 [0.10] Recommended Mounting Holes Part Number 1460060-1 Coupling Type A, C, F A, C, F Outer Body -- Silver Outer and Center Conductor -- Gold 7.3 [0.29] 6.45 [.254] 11.40 [.449] 3.00 [.118] 5.63 [.222] 3.00 [.118] 15.90 0.15 [.626 .006] 3.70 [.146] 1.15 Min. [.045] Part No. 1274544-1 1460060-1 3.60 [.142] 7.00 [.276] M5.5 x 0.5 Part No. 1460139-1 Pitch 3.70 [.146] 0.55 [.022] 2.54 [0.10] O 1.0 [0.04] 3.30 [.130] Recommended Mounting Holes Series 1.0/2.3, 75 Ohm Plugs, Solder/Crimp O 6.5 [0.26] 18.0 [0.71] Cable Coupling Type RG 179 A O Max. 2.67 0.105 Part No. 5-1393670-5 1) 1) Detent for jack 26 [1.02] O 7.9 [0.03] Cable Coupling Type RG 179 F ST 212 F 02Y(St)CY 0.45/2.0 F O Max. 2.67 0.105 3.2 0.13 3.6 0.14 Part No. 6-1393670-2 6-1393670-5 6-1393670-4 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 134 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3, 75 Ohm (Continued) Straight Plugs, Solder/Crimp 29.70 Ref. [1.169] 26.00 Ref. [1.024] O 4.45 0.05 [.175 .002] 7.80 [.307] Cable BELDEN 1855A Coupling Type Cable Coupling Type BT 3002 A, C, F A, C, F O Max. 2.67 0.105 619226-1 Part No. O Max. 2.67 0.105 1460815-1 O 0.64 0.010 [.025 .0004] 1.00 0.10 [.039 .004] O 7.30 [.287] O 5.40 [.213] 7.85 [.309] 7.60 [.299] Max. 12.00 [.472] Max. Ref. Plane Part No. O 2.10 [.083] 37.00 [1.457] Right-Angle Plug, Solder/Crimp 4.1 [0.16] 22.5 [0.89] O 7.9 [0.31] 15.7 [0.62] O 6.5 [0.26] Cable Coupling Type RG 179 F 02Y(St)CY 0.45/2.0 F O Max. 2.67 0.105 3.6 0.14 Part No. 2-1393670-6 7-1393670-0 23.00 Max. [.906] 16.00 [.630] Ref. Cable Coupling Type RG 316 F Cable Coupling Type RA 7000 A, C, F Cable Coupling Type RG 179 A, C, F O Max. 2.8 0.110 Part No. 619228-1 O 8.30 [.327] Max. 23.00 Max. [.906] 23.00 [.906] Max. O 7.90 [.311] Max. O 3.05 [.120] O Max. 2.67 0.105 Part No. 1460817-1 O Max. 2.67 0.105 8-1393670-0 O 6.10 [.240] Bulkhead Jack, Solder/Crimp O 4.1 [0.16] 0.6 1.5 [0.02]...[0.06] Mounting Panel BELDEN is a trademark of Belden Wire and Cable Company. 12.0 [0.47] 13.5 [0.53] O 6.6 [0.26] Part No. ECN0857-P Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 135 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3, 75 Ohm (Continued) Right-Angle Bulkhead Jack, Solder/Crimp 16.8 [0.66] 13.4 [0.53] 3.6 [0.14] O 4.1 [0.16] 12.7 [0.5] Cable Coupling Type RG 179, 316 A, C, F O Max. 2.67 0.105 Part No. 3-1393670-2 O 7.3 [0.29] 21.0 [0.83] 17.5 [0.69] 0.5 [0.02] Vertical PC Board Mount Bulkhead Jack 0.95 [0.04] O 0.9 [0.04] 5.08 [0.2] M5.5x0.5 [0.22]x[0.02] Pitch 6.0 [0.24] 12.0 [0.48] O 7.3 [0.29] 2.54 [0.10] O 1.5 [0.06] Recommended Mounting Holes Coupling Type A, C, F PC Board Mount Bulkhead Jack 22.30 [.878] 4.80 0.12 [.189 .005] 12.00 [.472] 5.80 [.228] Min. O 7.30 [.287] M5.5 x 0.50 [.020] Pitch 3.00 0.95 Sq. [.118] [.037] 2.30 [.091] O 1.5 [0.06] 0.20 Min. [.008] Coupling Type 23.35 [.919] 2.54 [0.10] Recommended Mounting Holes O Max. 1.00-2.30 .039-.091 A, C, F 6.00 [.236] 5.08 O 0.90 [.200] [.035] 0.5 [.020] 6.50 [.256] Vertical PC Board Mount Bulkhead Jack Part No. 8-1393670-3 Part No. 619220-1 5.08 [.200] 13.35 [.526] O 1.00 [.039] 5 Plcs. O 9.00 [.354] Coupling Type A, C, F Part No. 619106-1 5.08 [.200] 6.45 [.254] M5.5 x 0.5 Recommended Mounting Holes Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 136 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.0/2.3, 75 Ohm (Continued) Straight PCB Jacks, Multi-Port No. of Ports 2 3 4 Coupling Type A, C, F A, C, F A, C, F Part No. 1274714-3 1274714-2 1274714-1 10.00 [.394] 4.00 [.157] 20.00 [.787] 4.00 [.157] 4.00 [.157] 23.10 [.307] 11.00 [.433] 2 Plcs. 5.00 [.197] 23.10 [.307] 11.00 [.433] 4 Plcs. 11.00 [.433] 3 Plcs. 19.00 [.748] 8.00 [.315] 23.10 [.307] 6.00 [.236] 29.00 [1.142] 8.00 [.315] 10.00 [.394] 10.00 [.394] Part Number 1274714-3 39.00 [1.535] 8.00 [.315] 6.00 [.236] 10.00 [.394] 15.00 [.591] Part Number 1274714-2 10.00 [.394] Typ. 6.00 [.236] 15.00 [.591] Part Number 1274714-1 1.80 2 Plcs. [.071] R 0.765 4 Plcs. [.030] O 1.53 [.060] 2 Plcs. 8.00 0.05 [.315 .002] 5.00 [.197] Typ. 4.20 0.05 [.165 .002] O 2.20 4 Plcs. [.087] 10.00 [.394] Typ. Recommended PC Board Layout 2 Positions Shown Accessories for 50 Ohm and 75 Ohm 4.8 [0.19] 2.4 [0.09] 5.0 [0.20] Soldering aid (sleeve) for jack 1393670-8 with solder connection. Part No. 2-1393562-2 3.5 [0.14] 2.1 [0.08] For cable size similar to RG 179 and RG 316 0.8 [0.03] Installation example: 0.00 3.5 +- 0.50 0.00 5.5 +- 0.50 + .000 [0.14 - 0.02 ] + .000 0.00 8.5 +- 0.50 + .000 [0.33 - 0.02 ] Note: For more accessories, see page 147. Tin-Soldered [0.22 - 0.02 ] ECN0900-7 Sleeve Pushed onto Shielding Braid ECN0901-F Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 137 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) General The Series 1.6/5.6 mS connectors have been modified to incorporate improved technical advantages. Transmission values have been greatly improved while maintaining the proven positive characteristics of the previous genera- tions. All types of this new "third generation" Series 1.6/5.6 mS connectors are connection-compatible with their predecessor. Connectors are available in straight and angled versions as well as with different mechanisms for screw (type A), snap-on (type B), slide-in (type C), and latching (type F) coupling. All connectors of different coupling mechanisms are compatible with each other. Today's PCM technology demands place the Series 1.6/5.6 mS connectors as a most suitable component for transmission of high bit rates. Plug Jack 9.7 [0.38] 9.2 [0.36] O 5.6 [0.22] 6.7 [0.26] O 2.5 [0.10] M9x0.5 [0.35]x[0.02] O 8.25 O 6.6 M9x0.5 [0.35]x[0.02] [0.32] [0.26] Between Series Adapters For Series 1.6/5.6 Adapters please see pages 253-262. O 1.0 [0.03] 5.5 [0.22] 4.1 [0.16] 0.25 [0.01] 7.0 [0.28] 6.5 [0.26] The connectors are designed according to the pin-socket principle. The contacts are partially goldplated, ensuring long service life and stable contact resistance for a high number of intermateability cycles. The inner conductor parts are secured so that they cannot be displaced. The insulating parts are made of PEEK (polyetheretherketone) or PC (polycarbonate). ECN0934-R The cable inner conductors are soldered on, while the outer conductors are screwed or crimped on. Also, cable clamp which is independent of the braid clamping secures the connection point against tensile stressing for both methods of connection. In addition, assemblyfriendly connectors with full crimp and IDC (Insulation Displacement Contact) connection are included within the scope of delivery. The connectors are characterized by high mechanical strength and low space requirement. Connection possibilities exist for a number of different cables, including highly-flexible cable types (with foam insulation) with low attenuation or small diameter. Terminations and adapters (see also measurement accessories) round out the spectrum. 138 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Technical data Type A Coupling Types Screw coupling; version with union nut Electrical and mechanical characteristics in accordance with CECC 22240 This type permits the plug and jack to be screwed together manually by means of a union nut secured to the plug manually, thus preventing the coupling from being pulled apart. This is necessary for readily accessible locations, front panel test points and cable connections. Characteristic impedance -- 75 Frequency range -- up to 8 GHz Reflection factor1, referred to -- flexible cables, straight types -- up to 1 GHz, r 0.02 up to 4 GHz, r 0.06 up to 8 GHz, r 0.10 flexible cables, angled types -- up to 1 GHz, r 0.04 up to 2 GHz, r 0.06 up to 4 GHz, r 0.10 Insulation resistance -- initial value, 10 G after stressing, 1 G Screening effectiveness -- (straight screw connector at 1 GHz) 100 dB Inner conductor contact resistance -- after stressing 8 m Outer conductor continuity -- after stressing 4 m Voltage proof2 -- flexible cables (RG 59) -- at sea level, 1.5 kV, 50 Hz at 20 km altitude, 300 V, 50 Hz Working voltage2 -- flexible cables (RG 59) -- at sea level, 500 V, 50 Hz at 20 km altitude, 125 V, 50 Hz Service life -- 500 cycles Climactic category -- 40/85/21 Type B Snap-on coupling (push-pull) Connectors of this type offer fast make/break. They can be used for test and maintenance applications and also if there is lack of space and connectors with screw coupling cannot be used. Type C Slide-in coupling; version with centering ferrule In this type of coupling, the plug features a guide ferrule with a conical entry surface. This ensures that the floatable bulkhead plugs with cable connection make a reliable electrical connection to the rigid installed jack. Examples of this are single and multi-contact connections of slide-in applications. "W" denotes the allowed spacing of the mounting panel for satisfactory contact when the connection is made. Notes: 1 Guideline values, depending on cable type and connector style. 2 Some cable types suitable for use with these connectors have lower characteristic values than specified here. 3 For applicable cable types see page 151. Type F Latching coupling (Quick Lock) In this version, the cable plugs bear a funnel ferrule with built-in spring which snaps into a groove on the jack, simultaneously locking the connection. The connec- tion can be easily separated by lightly pulling the outer sleeve of the plug. This type of coupling provides the same amount of axial tensile strength as the screw coupling, but can be used with a higher packing density. 139 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Plugs, Solder/Clamp 37.0 [1.46] O 10.8 [0.43] O 10.8 [0.43] Cable 2YCCY 0.7/4.4 Coupling Type O Max. 7.8 0.31 A Part No. 1393682-1 37.0 [1.46] O 10.8 [0.43] O 12.8 [0.50] Cable 2YCCY 1.0/6.5 2YC(mS)CY 1.0/6.5 Cable a O 10.8 [0.43] O 10.8 [0.43] Coupling Type A Coupling Type 2YCY 0.4/2.5 A 2YCCY 0.4/2.5 A 2YC(mS)CY 0.4/2.5 A 2YCY 0.7/4.4 A RG 59 A 2YC(mS)CY 0.5/3.0 A Dim. a 30.7 1.21 30.7 1.21 30.7 1.21 32.9 1.30 32.9 1.30 32.9 1.30 O Max. 9.8 0.31 Part No. 1393682-2 O Max. Part No. 4.1 0.16 4.8 0.19 5.0 0.20 6.1 0.24 6.25 0.25 6.2 0.24 1-1393682-1 1-1393682-2 1-1393682-3 30.2 [1.19] O 11.5 [0.45] O 10.8 [0.43] Cable Coupling Type 02Y(St)CY 0.45/2.0 F O Max. 3.6 0.14 Part No. 1393681-8 Plugs, Solder/Crimp Cable a O 10.8 [0.43] O 10.8 [0.43] Coupling Type RG 179 A 2YCCY 0.4/2.5 A 2YC(mS)CY 0.4/2.5 A 2YC(mS)CY 0.5/3.0 A 2YCY 0.7/4.4 A 02Y(St)CY 0.45/2.0 A Dim. a 32.5 1.28 32.5 1.28 35.5 1.40 35.5 1.40 35.5 1.40 32.5 1.28 O Max. Part No. 2.6 0.105 4.8 0.19 5.0 0.20 6.2 0.24 6.1 0.24 3.6 0.14 1393680-2 1393680-3 1393680-4 1393680-5 1393680-9 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 140 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) Plugs, Solder/Crimp 32.0 [1.26] (Continued) Version with Preassembled Insulation O 10.8 [0.43] Cable Coupling Type 02Y(St)CY 0.45/2.0 F O 11.5 [0.45] O Max. 3.6 0.14 1393672-3 Part No. O Max. 3.6 0.14 1393672-9 O Max. 2.9 0.11 1460132-1 32.0 [1.26] Preassembled Isolation Parts O 10.8 [0.43] O 11.5 [0.45] 35.00 [1.378] O 3.80 [.150] Cable Coupling Type 02Y(St)CY 0.45/2.0 F Preassembled Version O 11.80 [.465] O 1.30 Min. [.051] Right-Angle Plugs, Solder/Crimp Cable Coupling Type 02YS(St)CHH 0.25/1.2 F 24.7 [0.97] Cable O 10.8 [0.43] a O 10.8 [0.43] Part No. Coupling Type 2YCCY 0.4/2.5 A 2YC(mS)CY 0.4/2.5 A 2YCY 0.7/4.4 A RG 59 A 2YC(mS)CY 0.5/3.0 A Dim. a 13.0 0.51 13.0 0.51 15.8 0.62 15.8 0.62 15.8 0.62 O Max. 4.8 0.19 5.0 0.20 6.1 0.24 6.25 0.25 6.2 0.24 Part No. Part No. 2-1393682-0 2-1393682-2 24.7 [0.97] Cable Coupling Type RG 179 A Cable Coupling Type 02Y(St)CY 0.45/2.0 F O 10.8 [0.43] O Max. 2.67 0.105 Part No. 2-1393682-3 18.2 [0.72] O 10.8 [0.43] 24.2 [0.95] O 11.5 [0.45] O Max. 3.6 0.14 Part No. 1-1393681-0 13.0 [0.51] O 10.8 [0.43] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 141 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Right-Angle Plugs, Solder/Crimp 24.7 [0.97] O 10.8 [0.43] a Cable Coupling Type 02Y12YC(mS)C6Y 0.45/2.0 A 02Y(St)CY 0.45/2.0 A Dim. a 15.0 0.59 15.0 0.59 O Max. Part No. 4.0 0.16 3.6 0.14 1-1393680-6 1-1393680-8 Right-Angle Plugs, IDC Connection 24.7 [0.97] O 10.8 [0.43] Cable Coupling Type 02Y(St)CY 0.45/2.0 A 2YCY 0.4/2.5 A Cable Coupling Type 02Y(St)CY 0.45/2.0 F O Max. 3.6 0.14 4.1 0.16 Part No. 1393757-8 O Max. 3.6 0.14 1393672-5 1393757-9 17.5 [0.69] ECN1615-7 IDC Connection Right-Angle Plug, Solder/Crimp 25.0 [0.98] O 11.5 [0.45] Part No. 15.0 [0.59] ECN0976-2 Crimp Connection Bulkhead Jacks, Solder/Clamp Cable Coupling Type 2YCY 0.4/2.5 A, B, F 2YCCY 0.4/2.5 A, B, F 2YC(mS)CY 0.4/2.5 A, B, F 2YCY 0.7/4.4 A, B, F RG 59 A, B, F 2YC(mS)CY 0.5/3.0 A, B, F a 2.0 Max. [0.08] Mounting Panel 14.3 [0.56] Max. M9.0x0.5 [0.35]x[0.02] O 10.8 [0.43] O 10.8 [0.43] O 8.2 [0.32] Dim. a 28.1 1.11 28.1 1.11 28.1 1.11 30.4 1.20 30.4 1.20 30.4 1.20 O Max. Part No. 4.1 0.16 4.8 0.19 5.0 0.20 6.1 0.24 6.25 0.25 6.2 0.24 3-1393682-2 3-1393682-3 3-1393682-5 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 142 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Bulkhead Jacks, Solder/Clamp (Continued) 34.5 [1.36] 14.3 [0.56] Max. 2.0 Max. [0.08] Mounting Panel M9.0x0.5 [0.35]x[0.02] Cable Coupling Type 2YCCY 1.0/6.5 A, B, F 2YC(mS)CY 1.0/6.5 A, B, F Cable Coupling Type RG 179 B, C, F O 10.8 [0.43] O 12.8 [0.50] O 8.2 [0.32] 32.5 [1.28] 2.5 Max. [0.10] Mounting Panel 10.6 [0.42] O Max. 9.8 0.38 9.8 0.38 Part No. 1393682-4 ECN0944-Y M9.0x0.5 [0.35]x[0.02] O 10.8 [0.43] O 10.8 [0.43] O Max. 2.67 0.105 Part No. 4-1393682-2 O 8.2 [0.32] Bulkhead Jacks, Solder a 19.4 [0.76] 6.5 [0.26] 12.0 [0.47] Mounting Panel 3.0 [0.12] Max. 1.7 [0.07] 3.0 [0.12] Max. M9.0x0.5 [0.35]x[0.02] O 8.2 [0.32] O Max. Part No. A, B, C, F 1-1393681-1 A, B, C, F 1-1393681-9 12.0 [0.47] M9.0x0.5 [0.35]x[0.02] Mounting Panel O 8.2 [0.32] O 10.8 [0.43] O 10.8 [0.43] 8.0 [0.31] ECN0982-B Dim. a 22.3* 0.88 23.5 0.93 19.4 [0.76] O 0.6 [0.02] Coupling Type A, B, C, F ECN0984-S Part No. 1-1393681-3 *Without soldering tags on outer conductor, dimension a up to inner conductor end. Bulkhead Jacks, Solder/Crimp 29.8 [1.17] 2.0 Max. [0.08] Mounting Panel 14.3 [0.56] Max. Cable Coupling Type RG 179 A, B, F 02Y12YC(mS)C6Y 0.45/2.0 A, B, F 06YCC(St)6Y 0.4/1.6 A, B, F M9.0x0.5 [0.35]x[0.02] O 10.8 [0.43] O 10.8 [0.43] 02Y(St)CY 0.45/2.0 O 8.2 [0.32] A, B, F O Max. 2.67 0.105 4.0 0.16 3.3 0.13 3.6 0.14 Part No. 2-1393680-4 O Max. 3.6 0.14 Part No. 0-1-1393672-4 2-1393680-2 2-1393680-5 0-1393672-6 ECN0947 N 29.8 [1.17] 2.0 Max. [0.08] Mounting Panel M9.0x0.5 [0.35]x[0.02] O 10.8 [0.43] O 10.8 [0.43] Crimp Connection With preassembled insulation parts Cable Coupling Type 02Y(St)CY 0.45/2.0 A, B, F O 8.2 [0.32] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 143 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Right-Angle Bulkhead Jack, Solder/Clamp 28.4 [1.12] 13.8 [0.54] 2.0 [0.08] Max. Mounting Panel M9.0x0.5 [0.35]x[0.02] O 8.2 [0.32] O 10.8 [0.43] Cable Coupling Type 2YCCY 1.0/6.5 A, B, F 2YC(mS)CY 1.0/6.5 A, B, F O Max. 9.8 0.39 9.8 0.39 Part No. 1393682-8 21.0 [0.83] ECN0966-U O 12.8 [0.50] 27.2 [1.07] 12.6 [0.50] 2.0 [0.08] Max. Mounting Panel M9.0x0.5 [0.35]x[0.02] O 8.2 [0.32] O 10.8 [0.43] Cable Coupling Type 02Y(St)CY 0.45/2.0 A, B, F 2YCCY 0.4/2.5 A, B, F 2YC(mS)CY 0.4/2.5 A, B, F 2YCY 0.7/4.4 A, B, F RG 59 A, B, F 2YC(mS)CY 0.5/3.0 A, B, F Cable Coupling Type a 27.2 [1.07] 12.6 [0.50] 2.0 [0.08] Max. O Max. Part No. 3.6 0.14 4.8 0.19 5.0 0.20 6.1 0.24 6.25 0.25 6.2 0.24 4-1393682-9 Dim. a 15.0 0.59 15.0 0.59 15.0 0.59 15.0 0.59 15.0 0.59 15.0 0.59 O Max. Part No. 2.67 0.105 4.8 0.19 5.0 0.20 4.0 0.16 3.3 0.13 3.6 0.14 3-1393680-0 Dim. a 15.0 0.59 15.0 0.59 O Max. Part No. 4-1393682-6 4-1393682-8 ECN0967-3 O 10.8 [0.43] Right-Angle Bulkhead Jack, Solder/Crimp Dim. a 13.0 0.51 13.0 0.51 13.0 0.51 15.8 0.62 15.8 0.62 15.8 0.62 Mounting Panel M9.0x0.5 [0.35]x[0.02] O 8.2 [0.32] O 10.8 [0.43] a RG 179 A, B, F 2YCCY 0.4/2.5 A, B, F 2YC(mS)CY 0.4/2.5 A, B, F 02Y12YC(mS)C6Y 0.45/2.0 06YCC(St)6Y 0.4/1.6 A, B, F 02Y(St)CY 0.45/2.0 A, B, F Cable Coupling Type A, B, F 3-1393680-2 3-1393680-5 4-1393682-3 3-1393680-7 ECN0969-J 27.2 Max. [1.07] O 10.8 [.43] 02YS(St)CHH 0.25/1.2 A, B, F O 8.2 [.32] 02YS(St)CHH 0.25/1.2 A, B, F a M9 x 0.5 [.35 x .02] 1.35 Min. [.053] 2.9 0.11 2.9 0.11 1460128-1* *1460169-1** * Tray Packaging. ** Individual Packaging. 3.80 [.150] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 144 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) 27.2 [1.07] Right-Angle Bulkhead Jack, IDC Connection 12.6 [0.50] 2.0 [0.08] Max. Mounting Panel M9.0x0.5 [0.35]x[0.02] O 8.2 [0.32] O 10.8 [0.43] 17.5 [0.69] ECN1614-Y Vertical PC Board Mount Jack Cable Coupling Type 02Y(St)CY 0.45/2.0 A, B, F Part No. 1-1393757-6 29.2 [1.15] 4.2 [0.17] 1.0 [0.04] 10.0 [0.39] ECN0986-9 Coupling Type A, B, F 10.8 [0.43] O 8.2 [0.32] 5.08 [0.20] 10.8 [0.43] O 8.2 [0.32] 0.8 [0.03] c 5.08 [0.20] M9.0x0.5 [0.35]x[0.02] O 9.0 [0.35] b 5.08 [0.20] 5.08 [0.20] O 1.3 [0.05] Pitch 2.54 [0.10] Part No. 1-1393681-6 Inner- and outer conductor, press-fit Coupling Type A, B, F 10.0 [0.39] M9.0x0.5 [0.35]x[0.02] Recommended Mounting Holes View A 14.4 [0.57] O 0.8 [0.03] a O Max. 3.6 0.14 Dim. a 6.0 0.24 Dim. b 27.2 1.07 Dim. c 16.4 0.65 Part No. 2-1393757-0 Recommended Mounting Holes Pitch 2.54 [0.10] Thickness 1.5 Max. [0.06] + 0.09 O 1.0 - 0.06 + 0.004 5 Plcs. [0.04 - 0.002 ] PC Board Mount Bulkhead Jack 4.50 [.177] 23.20 [.913] 0.13 .005] 2.00 [.079] 3.00 [.118 Center Contact 7.05 0.05 [.278 .002] O 9.00 [.354] O 1.20 [.047] M9 x 0.5-6g Thread O 7.00 [.276] O 1.00 [.039] Center Contact 6.50 [.256] 5.60 [.220] O 10.80 [.425] 3.00 Typ. [.118] O 1.50 [.059] 4 Plcs. Coupling Type A, B, F Part No. 1274513-1 5.60 [.220] Recommended Mounting Holes Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 145 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Right-Angle PC Board Mount Bulkhead Jack O 8.2 [0.32] b Coupling Type A, B, F d A, B, F M9.0x0.5 [0.35]x[0.02] c Oe 4 Plcs. a 4.5 [0.18] O 1.3 [0.05] Pitch 2.54 [0.10] A, B, F Dim. a 4.0 0.16 3.3 0.13 3.7 0.15 Dim. b 16.0 0.63 16.0 0.63 22.9 0.90 Dim. c 6.0 0.24 6.0 0.24 6.45 0.25 Dim. d 10.75 0.42 10.75 0.42 11.25 0.44 Dim. Part No. e 1.3 2-1393681-1 0.05 1.3 0.05 2-1393681-2 1.8 0.07 2-1393681-3* *With positioning and snap-on system onto PC board Recommended Mounting Holes U-link Plug/Plug b a Coupling Type A 24.4 [0.96] Dim. a 0.1 [0.004] 15.0 0.59 Dim. b Max. 26.5 1.04 Dim. a 0.1 [0.004] 15.0 0.59 Dim. b Max. 26.5 1.04 Part No. 6-1460823-1 O 10.8 [0.43] b a Coupling Type 22.3 [0.88] B Part No. 6-1460823-2 O 10.8 [0.43] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 146 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Series 1.6/5.6 mS (75 Ohm) (Continued) Accessories M9.0x0.5 [0.35]x[0.02] These components are provided when bulkhead jack part numbers are ordered, but can also be ordered separately. Threaded ring for installation of bulkhead jacks Part No. 1-1393562-0 O 10.8 [0.43] 2.3 [0.09] 4.8 [0.19] 2.4 [0.09] 5.0 [0.20] Soldering aid (sleeve) for jack (1-1393681-9) with solder termination Part No. 2-1393562-2 3.5 [0.14] 2.1 [0.08] Cable stripping and installation example: see Part number 2-1393562-2 under "Series 1.0/2.3", page 137. 0.8 [0.03] Measurement Accessories Between Series Adapters (75 Ohm) O 6.5 [0.26] Plug 1.6/5.6 to Plug 1.0/2.3 O 10.8 [0.43] 9.2 [0.36] Coupling Type A 1) 1) 8.9 [0.35] 28.0 [1.10] O 4.1 [0.16] Plug 1.6/5.6 to Jack 1.0/2.3 O 10.8 [0.43] 9.2 [0.36] 1) Coupling Type A, F2 A, F2 33.0 [1.30] 2 1) Detent for jack Part No. 6-1460821-1 Part No. 2-1393670-2 6-1460821-2 Only jack side Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 147 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Measurement Accessories (Continued) Between Series Adapters (75 Ohm) (Continued) O 6.5 [0.26] O 8.2 [0.32] Plug 1.0/2.3 to Jack 1.6/5.6 O 10.8 [0.43] 8.9 [0.35] 1) Coupling Type A, B2, F2 34.5 [1.36] 2 Part No. 6-1460821-3 Only jack side 1) Detent for jack O 8.2 [0.32] O 4.1 [0.16] O 10.8 [0.43] Jack 1.0/2.3 to Jack 1.6/5.6 Coupling Type A, B, F 39.4 [1.55] O 14.5 [0.57] O 10.8 [0.43] 46.4 [1.83] Part No. 6-1460821-4 BNC Plug to Plug 1.6/5.6 Part No. 7-1393665-4 ECN1669-6 BNC Plug to Jack 1.6/5.6 O 14.5 [0.57] O 8.2 [0.32] 44.3 [1.74] Part No. 7-1393665-6 ECN1670-9 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 148 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Measurement Accessories (Continued) Between Series Adapters (75 Ohm) (Continued) O 14.5 O 11.0 O 9.6 [0.57] [0.43] [0.38] BNC Jack to Plug 1.6/5.6 O 10.8 [0.43] 45.4 [1.79] Part No. 7-1393665-7 ECN1671-H M9.0x0.5 [0.35]x[0.02] BNC Jack to Jack 1.6/5.6 O 14.5 O 11.0 O 9.6 [0.57] [0.43] [0.38] O 8.2 [0.32] 45.4 [1.79] Termination (75 Ohm) Part No. 7-1393665-5 ECN1672-Q O 6.5 [0.26] Standard Termination Plug 1.0/2.3 1) 15.0 [0.59] Coupling Type A 8.9 [0.35] Power W 0.6 Part No. 7-1393665-2 Power W 0.6 Part No. 7-1393665-3 Power W 1.0 Part No. 6-1393665-1 1) Detent for jack O 4.1 [0.16] 23.1 [0.91] Jack 1.0/2.3 O 6.5 [0.26] 29.6 [1.17] Coupling Type A, F Plug 1.6/5.6 O 10.8 [0.43] Coupling Type A Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 149 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Measurement Accessories (Continued) In-Series Adapter (75 Ohm) Adapter 1.6/5.6, Plug/Plug O 10.8 [0.43] Coupling Type A 43.8 [1.73] 41.3 [1.63] Part No. 1393681-6 Adapter 1.6/5.6, Plug/Jack O 10.8 [0.43] Coupling Type A, B*, F* O 8.2 [0.32] Part No. 1-1393681-7 *Jack side only M9.0x0.5 [0.35]x[0.02] 14.3 [0.56] Adapter 1.6/5.6, Jack/Jack O 8.2 [0.32] 28.4 [1.12] O 10.8 [0.43] Coupling Type A, B, F M9.0x0.5 [0.35]x[0.02] Part No. 1-1393665-1 Note: U-link connectors see "1.6/5.6" section, page 146. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 150 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Coaxial Cables List of the coaxial cables that are listed in the various connector series of this section. 1) 2) Characteristic Impedance () Max. Cable Outer Diameter (mm) Dielectric Diameter (mm)/ Material1) 50 50 50 50 50 50 50 50 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 1.9 2.1 2.25 2.6 2.8 3.0 3.6 6.4 2.67 3.0 3.3 3.2 3.6 4.0 4.0 4.8 5.0 6.1 6.2 6.25 7.8 9.8 9.8 0.91max/PTFE 0.87/PTFE 1.71max/PTFE 1.60max/PTFE 1.60max/PE 1.52/PTFE 3.01max/PTFE 5.38max/PTFE 1.68max/PTFE 1.60max/PTFE 1.68max/Cell-FEP 2.1max 2.0max/Cell-PE 2.0maxE/Cell-PE 2.54max/PE 2.54max/PE 2.54max/PE 4.25max/PE 2.83max/PE 3.8max/PE 4.43max/PE 6.4/PE 6.4/PE Cable-Type Designation US Designation Manufacturer des. 5YC5Ye 0.3/0.86 RG 178 -- RG 196 5YK 0.51/1.68 RG 405 5YC5Ye 0.5/1.5 RG 316 2YCY 0.5/1.5 RG 174 5YCC5Y 0.5/1.5 RD 316 5YK 0.9/3.0 RG 402 5YK 1.63/5.33 RG 401 5YC6Y 0.3/1.6 RG 179 -- RD 179 06YCC(St)6Y 0.4/1.6 -- -- ST 212 02Y(St)CY 0.45/2.0 -- 02Y12YC(mS)C6Y 0.45/2.0 -- 2YCY 0.4/2.5 -- 2YCCY 0.4/2.5 -- 2YC(mS)CY 0.4/2.5 -- 2YCY 0.7/4.4 -- 2YC(mS)CY 0.5/3.0 -- 2YCY 0.58/3.7 RG 59 2YCCY 0.7/4.4 -- 2YCCY 1.0/6.5 -- 2YC(mS)CY 1.0/6.5 -- VDE Designation2) IEC Designation 96-IEC 50-1-1 50-1-2 -- 50-2-1 -- -- -- -- 75-2-1 -- -- -- -- -- -- -- -- -- -- -- -- -- -- Material label PTFE Polytetrafluorethylene PE Polyethylene FEP Perfluorethylene propylene PFA Perfluoralkoxy copolymer Mounting label of the VDE type numbers (from inside to outside) Example: Explanation Screen: C = Cu braiding K = Cu tape Dielectric and Jacket 2Y = PE 5Y = PTFE 02Y = Cell PE 06Y = Cell FEP 6Y = FEP Specifications on inner conductor: vs = silver plated staku = Bare copper-clad steel wire conductor Intermediate layer: mS = magnetic screen St = static screen 6Y C (mS) C Y Jacket color: gn = green gr = grey rt = red ws = white 0.7/4.0 -75 (r2/100) vs gr Dielectric 1st screen Intermediate layer 2nd screen Outer jacket Diameter inner conductor/dielectric Characteristic impedance Max. reflection (r) in % / frequency in MHz Specifications on inner conductor and/or jacket color 151 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors Product Facts Intermateable with Corning Gilbert GPO Series Connector DESC approved Enhanced performance features Simplified Assembly Between Series Adapters For SMP Between Series Adapters, see pages 253-262. SMP microminiature push-on coaxial connectors provide solutions for today's modular designs with denser packaging requirements. The extremely small size of the SMP offers a versatile solution for high density packaging allowing connector center-to-center spacing of 4.32 [0.17]. The push-on interface facilitates easier assembly and test with a positive snap-in feature to indicate a fully mated connection. The rugged SMP interface can withstand harsh environments of mechanical shock and vibration, typically found in military or aerospace related applications. This SMP connector interface is the standard used by Defense Electronics Supply Center (DESC) to generate the SMP push-on connector series. SMP connectors can be your design solution for mechanical packaging and frequency response. The SMP interface provides 0.020" of radial misalignment for critical blindmate applications. Mating forces are strictly controlled to ensure reliable connections per mated pair or when simultaneously mating multiple connectors. Cable jacks include an anti-rocking ring to ensure reliable mechanical performance regardless of the operating environment. SMP connectors offer enhanced broadband VSWR performance of VSWR SMP Shroud and Jack to Jack Adapter Assembly 1.15:1 max thru 26GHz and 1.40:1 max thru 40GHz. Standard design SMP configurations include cable connectors, straight and right-angle, for 0.047 and 0.085 semi-rigid cable, full detent, limited detent and smooth bore mating shrouds that can be bulkhead or flange mounted and glass feedthroughs for coax to circuit launchers. In-series adapters for module to module intermating and between series adapters for integrating or testing systems or components parameters. 1.50:1 1.40:1 1.30:1 1.20:1 1.10:1 0.0 8.0 16.0 24.0 32.0 40.0 GHz Typical VSWR for SMP Jack to Jack Adapter Part Numbers 1056700-1 and 1056721-1 GPO is a trademark of Corning Gilbert, Inc. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 152 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors (Continued) Specifications General Materials and Finishes Housings and Center Contacts Dielectric Shrouds Hermetic Seal Beryllium Copper per ASTM-B-196; gold plate over nickel plate PTFE Fluorocarbon per ASTM-D-1457 Stainless steel per ASTM-A582 Type 303; passivate per ASTM-A380 Glass bead Electrical Frequency Range VSWR dc - 40.0 GHz 1.10:1 Maximum dc - 23.0 GHz 1.15:1 Maximum 23.0 - 26.0 GHz 1.40:1 Maximum 26.0 - 40.0 GHz 335 Vrms maximum at sea level 0.10 f (GHz) maximum 5000 megohms minimum 500 volts (VRMS minimum) 325 volts (VRMS minimum) @ 5 MHz 50 ohms nominal -80dB to 3 GHz, -65dB from 3 to 26.5 dB minimum Initial center contact 6.0 milliohms maximum Outer contact 2.0 milliohms maximum Voltage Rating Insertion Loss Insulation Resistance Dielectric Withstanding Voltage RF High Potential Impedance RF Leakage Contact Resistance Mechanical Durability Radial Misalignment Axial Misalignment Force to Engage 100 mating cycles minimum 0.020 minimum .000/.010 full detent 15.0 lbs. maximum half detent 10.0 lbs. maximum smooth bore 2.0 lbs. maximum full detent 5.0 lbs. minimum half detent 2.0 lbs. minimum smooth bore 0.5 lbs. minimum 1.5 lbs. minimum axial force Force to Disengage Center Contact Retention Environmental Operating Temperature Vibration Shock Thermal Shock Moisture Resistance -65C to +165C per mil-std-202, method 204, test condition D per mil-std-202, method 213, test condition I per mil-std-202, method 107, test condition B per MIL-STD-202 method 106, except step 7b shall be omitted. Resistance shall be 200 megohms within 5 minutes after removal from humidity. Interface Dimensions Jack Shroud EMI Ring 3.40 [.132] Min. 3.70 Dia. [.145] Max. Full Detent 2.80 .050 [.110 .002] 3.43 Dia. [.135] Max. 8.60 .076 Dia. [.142 .003] Anti-Rock Ring Bullet 2.8 [.112] Min. Smooth Bore 3.43 Dia. [.135] Max. 3.20 .050 Dia. [.125 .002] Note: The U.S. Government (DESC) has determined that the above specified interface dimensions are interchangeable and intermateble with Corning Gilbert GPO Series RF Connectors.1 GPO is a trademark of Corning Gilbert, Inc. 1 Per DESC drawing numbers 94007 and 94008, series SMP. 153 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors (Continued) Straight Cable Jack, Solder Attachment 6.40 [.250] 3.40 Dia. [.135] Max. 3.40 Dia. [.133] EMI Ring Anti-Rock Ring Cable .047 Semi-Rigid .085 Semi-Rigid (RG 405) Right-Angle Cable Jack, Solder Attachment Part No. 1056526-1 1056527-1 5.80 Max. [.230] 4.10 [.161] Max. Dim.B Dim.A EMI Ring Anti-Rock Ring 3.40 Dia. [.135] Max. Cable Dim. A 4.8 .190 5.3 .209 .047 Semi-Rigid .085 Semi-Rigid (RG 405) Jack to Jack Adapter (Bullet) Dim. B 5.8 .230 6.7 .265 Part No. 1056553-1 1056554-1 6.40 / 6.50 [.2525 / .2555] 3.40 Dia. [.133] 3.40 Dia. [.135] Max. Part No. 1056700-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 154 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors (Continued) Shroud -- Threaded 3.00 [.120] 4.10 Dia. [.160] Max. Description Full Detent Limited Detent Smooth Bore Shroud -- 2 Hole Flange Surface Mount Part No. 1056745-1 1056743-1 1056744-1 3.00 [.120] Dim.C 4.20 [.165] Dim.B Dim.A Dim.D 2 Plcs. Description Full Detent 1.10 [.045] Dim. A Dim. B Dim. C Dim. D Part No. 12.2 .480 8.3 .328 4.7 .187 2.5 .098 1056721-1 15.8 .625 12.2 .481 5.7 .223 2.6 .102 1056722-1 10.2 .400 7.2 .282 4.2 .165 1.9 .073 1056724-1 12.2 .480 8.3 .328 4.7 .187 2.5 .098 1056729-1 10.2 .400 7.2 .282 4.2 .165 1.9 .073 1056731-1 Dim. B 2.0 .080 Part No. Limited Detent Shroud -- Press Fit Dim.B Dim.A Description Limited Detent Dim. A 3.9 .154 1056736-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 155 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMP Microminiature Push-On Coaxial Connectors (Continued) Shroud -- Solder-In Hermetic 3.60 [.140] 2.00 [.080] 1.30 [.050] Description Full Detent Limited Detent Smooth Bore 0.40 Dia. [.015] 3.70 [.145] Dia. 2.50 Dia. [.098] Glass Bead Assembly 1.60 [.063] Part No. 1056750-1 1056751-1 1056752-1 2.50 [.099] Part No. 1056728-1 .400 [.015] Dia. Plug, Straight, Full Detent 3.20 [.125] 4.60 [.182] 0.30 [.010] 3.60 [.140] O 6.90 [.272] 3.80 Sq. [.150] OSMP Plug Full Detent 5.10 Sq. [.200] O 0.40 [.015] Plug, Right-Angle, Limited Detent O 1.70 [.068] 4 Plcs. 1.80 [.072] Ref. Plane O 0.80 4 Plcs. [.030] 9.10 [.358] 4.70 [.186] 2.20 [.085] 0.60 0.10 Dia. [.024 .002] 8.10 [.320] 0.50 0.10 Dia. [.020 .002] M/A-COM Model Number 2965-5006-62 Part No. 1061692-1 4.20 [.164] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 156 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors Product Facts Interface designed for multiple interconnects For high performance microwave system requirements Module to module, module to motherboard, fixed and float mount Bulkhead or panel mount For flexible and semi-rigid cable OSP miniature connectors for semi-rigid cable meet high performance requirements for microwave multiple interconnects. Standard units are available in bulkhead or panel mount designs for either direct solder or solderless compression crimp attachment. Complete tooling for both versions is located in the Tooling Section of this catalog. Jack connectors are available in either float or rigid mount. Rigid mount units will function to specifications up to .10 [.004] radial misalignment with the mating plug connector. Applications requiring greater than .10 [.004 ] radial misalignment can use either the float design or floating connector plates with guide pins. high performance requirements for microwave system applications. The cable attachment is permanent and highly reliable. Ease of assembly permits users unskilled in soldering techniques to rapidly produce cable assemblies with consistently excellent mechanical and electrical performance. The solderless compression crimp attachment meets 157 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) The specifications given refer specifically to mated pair of Part Numbers 1059410-1 and 1059402-1 (RG 402) and 1059412-1 and 1059404-1 (RG 405). Specifications on other connectors are available on request. The general electrical, mechanical and environmental specifications in the following table are recommended for procurement documents or drawings. Engineering Data Impedance -- Frequency -- Temperature Rating -- 50 ohms dc to 22.0 GHz -65 to 125 C Electrical RG 402 (.141) Semi-Rigid RG 405 (.085) Semi-Rigid 1.02 + .005f (GHz) 1.02 + .008f (GHz) -.03 x f (GHz) 5,000 megohms min. 1.05 + .005f (GHz) 1.05 + .009f (GHz) -.03 x f (GHz) 5,000 megohms min. VSWR -- dc - 18.0 GHz 18.0 - 22.0 GHz RF Transmission Loss -- Insulation Resistance -- Contact Resistance -- Center Contact Outer Contact Outer Contact to Cable Dielectric Withstanding Voltage -- Corona Extinction Voltage at 70,000 Ft.-- RF High Potential at 5 MHz -- RF Leakage Interface Only -- Power Handling -- 2.0 milliohms max. 2.0 milliohms max. 2.0 milliohms max. 2.0 milliohms max. 0.5 milliohms max. 0.5 milliohms max. 1500 volts RMS 1000 volts RMS 375 volts min. 335 volts min. 1,000 volts RMS 670 volts RMS -(90-fGHz) dB min. (fully mated) -(90-fGHz) dB min. (fully mated) 300W at 3 GHz (sea level) and room temperature Environmental Corrosion -- Vibration -- Shock -- Temperature Cycling -- Moisture Resistance -- Method 101, Condition B, MIL-STD-202 Method 204, Condition D, 20G's, MIL-STD-202 Method 213, Condition I, 100G's, MIL-STD-202 Method 107, Condition B, MIL-STD-202 Method 106, MIL-STD-202 Material Housing -- Center Contact -- Dielectric -- Gasket (O'Ring) -- Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582 Beryllium copper per ASTM-B-196 TFE fluorocarbon per ASTM-D-1457 MIL-P-25732 Mechanical Force to Engage -- Force to Disengage -- Center Contact Retention -- Durablilty -- Radial Misalignment -- Rigid Mount Float Mount 3 pounds max. 1.5 pounds max. 6 pounds min. 5,000 Cycles .10 [. 004] .51 [.020] Mating Characteristics Jack Connector -- Center Contact Socket Insertion Force Withdrawal Force Oversize test Pin -- Test Pin Finish -- Insertion Depth -- Number of Insertions -- Test Pin -- Test Pin Finish -- Insertion Depth -- Insertion Force -- Test Pin -- Test Pin Finish -- Insertion Depth -- Withdrawal -- .945 + .003 [.0372 + .0001] dia. 16 micro inch .76/1.14 [.030/.045] 3 .940 + .003 [.0370 + .0001] dia. 16 micro inch 1.27/1.91 [.050/.075] 3 pounds max. .90 + .003 [.0355 - .0001] dia. 16 micro inch 1.27/1.91 [.050/.075] 1 ounce min. Finish Center Contact -- Housing -- Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550 Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 All dimensions shown are nominal. Contact the factory for specific tolerances. 158 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Interface Mating Dimensions The connector interface, specifically designed for multiple interconnects, maintains reliable performance over the typical mechanical tolerance required in cost effective packaging. The interface test data shows excellent performance is maintained with mating gaps up to 0.38 [.015]. Meets MIL-STD-348 Figure 321. Intermateable to BMA Connectors. Jack Letter A B C D E F Dimensions 1.78 .070 Nom. 5.72 .225 Min. 7.62 Ref. .300 5.00 Nom.* .197 5.08 .200 Max. 3.23 Max.* .127 Plug Letter A B C D E F Dimensions 1.78 .070 Nom. 5.33 .210 Nom. 7.62 Ref. .300 5.05 Min. .199 0.91 .036 Nom. 3.25 Min. .128 *With spring bottomed 159 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment Bulkhead Feedthrough Cable Plug Rear Mount 7.9 Hex. A [.312] Dia. 6.1 0.03 Dia. [.240 .001] 17.5 [.690] ed Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 Bulkhead Feedthrough Cable Jack Rigid Rear Mount 9.19 Max. [.362] B Dia. 6.1 + 0.03 - .000 Dia. [.242 + .001] - .000 Recommended Mounting Hole Dimensions A B Plating Part No. Gold 3.7 .144 4.6 .180 1059402-1 Gold 2.3 .089 3.0 .120 1059404-1 6.4 A Dia. Dia. [.250] 11 [.43 11.1 Hex. [.437] 18.0 [.710] ed ole Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 9.19 Max. [.362] B Dia. 9.1 + 0.03 - .000 Dia. [.359 + .001] - .000 Recommended Mounting Hole Dimensions A B Plating Part No. Gold 3.7 .144 4.6 .180 1059410-1 Gold 2.3 .089 3.0 .120 1059412-1 Flange Mount Cable Jack Floating Rear Mount 0.10 2.6 +- 0.03 Dia. + .004 2 Holes [.102 - .001 ] 14.2 0.10 [.560 .004] B Dia. 14.2 [.560] OSP Jack A Dia. Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 19.1 Dia. [.750] 0.25 9.5 +- 0.00 + .010 [.375 - .000 ] 18.0 [.710] 9.6 + 0.05 - 0.03 Dia. [.377 + .002] - .001 9.5 [.372] 7.1 [.280] Recommended Mounting Hole Dimensions Part No. A B 3.7 .144 4.6 .180 1059453-1 2.3 .089 3.0 .120 1059456-1 Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated stainless steel. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 160 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment (Continued) Low Profile -- Bulkhead Feedthrough Cable Jack -- Floating Rear Mount A 11.2 Dia. Dia. [.440] Max. 9.3 0.03 Dia. [.365 .001] 16.2 [.640] Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 9.4 + 0.05 - 0.03 Dia. [.368 + .002] B Dia. - .001 Recommended Mounting Hole Dimensions A B Plating Part No. Gold 3.7 .144 4.6 .180 1059505-1 Gold 2.3 .089 3.0 .120 1059506-1 When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Low Profile -- Panel Feedthrough Cable Jack -- Floating Rear Mount 7.6 Dia. [.300] A Dia. 18.0 [.710] Cable RG 402/U 3.58 .141 RG 405/U 2.16 .085 B Dia. Dimensions A B Plating Part No. Gold 3.7 .144 4.6 .180 1059465-1 Gold 2.3 .089 3.0 .120 1059467-1 Recommended removal tool part number 1059774-1 is described in the Tooling Section of this catalog. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Stand-Off C Panel A Panel B 8.6 + 0.08 - 0.00 [.340 + .003] 8.0 + 0.05 - 0.00 [.316 + .002] - .000 - .000 Panel B 1.3 + 0.00 - 0.13 [.050 + .000] - .005 Panel A .003 2.3 .090 2.3 .090 2.3 .090 3.2 .125 3.2 .125 3.2 .125 Panel B .003 9.5 .375 11.1 .438 12.7 .500 9.5 .375 11.1 .438 12.7 .500 Stand-Off Panel C +.050/-.000 7.2 .285 5.6 .222 4.1 .160 6.4 .250 4.7 .187 3.2 .125 Recommended Mounting Detail Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 161 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Solderless Compression Crimp Attachment Bulkhead Feedthrough Cable Plug Fixed Rear Mount 7.9 A Hex. Dia. [.312] 6.1 0.03 Dia. [.240 .001] d 6.1 + 0.03 - .000 Dia. [.242 + .001] 9.19 Max. [.362] 5.5 Dia. [.218] B - .000 Recommended Mounting Hole Dim. B Cable Plating Dim. A Before Crimping After Crimping Part No. RG 405/U 2.16 .085 Passivated Stainless Steel 2.2 .088 19.8 .782 17.2 .677 1059399-1 Outline drawing shows after crimp dimensions. A 6.4 Dia. [.250] Dia. Bulkhead Feedthrough Cable Jack Fixed Rear Mount 11 [.43 11.1 Hex. [.437] 5.5 Dia. [.218] B 9.1 + 0.03 - .000 Dia. [.359 + .001] 12.7 Max. [.500] - .000 d Recommended Mounting Hole Dim. B Cable Plating Dim. A Before Crimping After Crimping Part No. RG 402/U 3.58 .141 Passivated Stainless Steel 3.6 .143 21.1 .830 18.2 .715 1059408-1 Outline drawing shows after crimp dimensions. Flange Mount Cable Jack Floating Rear Mount 2.6 Dia. [.102] 2 Plcs. Dia. 9.5 Dia. [.372] 5.5 Dia. [.218] 19.1 Dia. [.750] 9.6 + 0.05 - 0.03 14.2 0.10 [.560 .004] [.377 + .002] - .001 Dia. 9.5 [.372 14.2 [.560] B A Dia. 7.1 [.280] 9.7 [.380] Recommended Mounting Hole Dim. B Cable Plating Dim. A Before Crimping After Crimping Part No. RG 402/U 3.58 .141 RG 405/U 2.16 .085 Passivated Stainless Steel Passivated Stainless Steel 3.6 .143 22.6 .891 19.8 .780 1059451-1 2.2 .088 22.6 .891 19.8 .780 1059452-1 Outline drawing shows after crimp dimensions. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 162 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) For Flexible Cable, Crimp Attachment 6.9 0.03 Dia. [.240 .001] Bulkhead Feedthrough Cable Plug Rear Mount 11.4 [.447] ded Hole Cable RG 174/U, 179, 187, 188, 316 6.9 [.240 6.1 + 0.03 - .000 Dia. [.242 + .001] 21.2 Ref. [.833] 11 [.44 - .000 Recommended Mounting Hole 34.9 Max. [1.375] Plating Part No. Passivated Stainless Steel 1059523-1 9.1 0.03 Dia. [.357 .001] Bulkhead Feedthrough Cable Jack Rigid Rear Mount 6.4 [.250] 9.1 + 0.03 - .000 Dia. [.359 + .001] - .000 21.7 Ref. [.855] Recommended Mounting Hole 35.6 Max. [1.400] Cable RG 55/U, 142, 223, 400 Flange Mount Cable Jack Floating Rear Mount Plating Part No. Passivated Stainless Steel 1059525-1 2.6 Dia. [.102] 2 Plcs. Dia. 9.6 + .051 - .025 Dia. [.377 + .002] - .001 9.5 [.372] Dia. 14.2 [.560] 21.7 Ref. [.875] 19.1 [.750] Dia. 7.1 [.280] 9.5 [.375] Recommended Mounting Hole 35.6 Max. [1.400] Cable RG 55/U, 142, 223, 400 RG 174/U, 179, 187, 188, 316 RG 178, Double Braid Low Profile -- Panel Feedthrough Cable Jack -- Rear Mount 9.5 [.372 Dia 14.2 .102 [.560 .004] Plating Part No. Passivated Stainless Steel 1059540-1 Passivated Stainless Steel 1059541-1 Passivated Stainless Steel 1058572-1 7.6 [.300] Dia. 9.4 + 0.05 - 0.03 Dia. [.368 + .002] - .001 22.3 Ref. [.878] 35.6 Max. [1.400] Cable RG 174/U, 179, 187, 188, 316 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Recommended Mounting Hole Plating Part No. Passivated Stainless Steel 1059551-1 Refer to Recommended Mounting Hole Detail for Semi-Rigid Cable Low Profile Feedthrough Cable Jack. Recommended removal tool part number 1059774-1 as described in the Tooling Section of this catalog. 163 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Panel Mount Straight Terminal 2-Hole Flange Mount Plug Receptacle 6.4 Dia. [.250] 2.6 Dia. 12.2 [.102] [.481] 2 Plcs. 1.3 .050 Dia. 15.9 [.625] 1.7 [.065] 4.1 Dia. [.162] 9.9 [.390] 22.3 [.878] 2.6 Dia. [.102] 2 Plcs. 15.9 [.625] 1.3 Dia. [.050] 12.2 [.481] 4.1 Dia. [.162] 27.4 [1.080] 4-Hole Flange Mount Plug Receptacle Part No. 1059566-1 6.6 [.260] 8.4 [.330] 2-Hole Flange Mount Jack Receptacle Plating Passivated Stainless Steel Plating Passivated Stainless Steel Part No. 1059596-1 7.6 [.300] 2.6 Dia. [.102] 2 Plcs. 6.4 Dia. [.250] 1.3 Dia. [.050] Plating Passivated Stainless Steel 4.1 Dia. [.162] 22.3 [.878] 12.7 [.500] Sq. 4-Hole Flange Mount Jack Receptacle Part No. 1059563-1 8.6 [.340] Typ. 2.6 Dia. [.102] 2 Plcs. Plating Passivated Stainless Steel 1.3 Dia. [.050] 27.4 [1.080] 4.1 Dia. [.162] 12.7 [.500] Sq. Part No. 1059594-1 8.6 [.340] Typ. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 164 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Panel Mount (Continued) Straight Terminal Threaded Installation -- Panel Feedthrough Plug Receptacle 1.6 Dia. [.064] 0.5 Dia. [.020] 1.7 0.03 Dia. [.066 .001] 5.5 0.03 Dia. [.218 .001] 5.3 Dia. 10.4 [.410] [.210] 5.3 0.05 [.210 .002] 6.4 Panel [.250] Plating Passivated Stainless Steel Part No. 1059617-1 Recommended Mounting Hole Threaded Installation -- Panel Feedthrough Jack Receptacle 1.6 Dia. [.064] 5.5 0.03 Dia. [.218 .001] 5.3 Dia. 10.4 [.410] [.210] 5.3 0.05 [.210 .002] 0.5 Dia. [.020] 1.7 0.03 Dia. [.066 .001] 6.4 Panel [.250] Plating Passivated Stainless Steel Part No. 1059657-1 Recommended Mounting Hole Press Fit Installation -- Panel Feedthrough Plug Receptacle 0.5 Dia. [.020] 7.6 Dia. [.300] 6.4 + 0.05 - .000 Dia. [.253 + .002] - .000 7.92 Dia. [.312] 6.3 + .000 [.248 - 0.05 Dia. + .000] - .002 6.4 [.250] 1.2 0.03 Dia. [.046 .001] 6.4 0.03 Dia. [.250 .001] Plating Passivated Stainless Steel Part No. 1059651-1 Recommended Mounting Hole Press Fit Installation -- Panel Feedthrough Jack Receptacle 0.5 Dia. [.020] 7.6 Dia. [.300] 6.4 + 0.05 - .000 Dia. [.253 + .002] - .000 6.3 + .000 6.4 - 0.05 Dia. [.250] [.248 + .000] 1.2 0.03 Dia. [.046 .001] 6.4 0.03 Dia. [.250 .001] Plating Passivated Stainless Steel Part No. 1059654-1 - .002 Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 165 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Printed Circuit Board Mount Straight Plug Receptacle -- Captured Contact 1.7 + 0.08 - .000 Dia. [.067 + .003] Hole Typ. - .000 1.0 Sq. [.040] 4 Plcs. 1.3 Dia. [.050] 12.7 [.500] 5.1 [.200] Typ. 6.4 [.250] Sq. 5.1 [.200] Typ. Plating Gold Part No. 1059684-1 Plating Gold Part No. 1059681-1 Plating Gold Part No. 1059691-1 Plating Gold Part No. 1253111-1 Recommended Mounting Hole Straight Jack Receptacle -- Captured Contact 1.7 + 0.08 - .000 Dia. [.067 + .003] Hole Typ. 5.1 [.200] Typ. 9.5 [.375] Dia. 13.5 [.530] - .000 1.0 Sq. [.040] 4 Plcs. 1.3 Dia. [.050] 5.1 [.200] Typ. Recommended Mounting Hole Right-Angle Plug Receptacle -- Captured Contact 13.5 [.530] 15.0 [.590] Surface Mount Vertical Plug with Small Leg O-Ring - .000 1.0 Sq. [.040] 4 Plcs. 1.3 Dia. [.050] 9.4 [.372] OSP Plug 1.7 + 0.08 - .000 Dia. [.067 + .003] Hole Typ. 5.1 [.200] Typ. 6.4 [.250] Sq. Recommended Mounting Hole 1.7 + 0.08 - .000 Dia. [.067 + .003] 1.6 Sq. [.062] 4 Plcs. 1.3 Dia. 6.4 [.050] [.250] Sq. 5.1 [.200] Typ. - .000 4.5 [.178] Typ. 2.5 + 0.08 Dia. Hole - .000 [.098 + .003] Typ. - .000 4 Plcs. 4.5 [.178] Typ. Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 166 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Hermetically Sealed Metal-To-Metal Rigid Gasket Seal -- Panel Feedthrough Plug Receptacle 0.5 Dia. [.020] 5.3 Dia. [.210] 10.4 [.410] VSWR (GHz) 1.04 + .009f RF Leakage (dB) -(90-fGHz) Rigid Gasket 1.6 [.064] Dia. Plating Part No. Passivated stainless steel 6059632-1 Installation Thermal Limit: 250C. Recommended Mounting Hole Detail A follows, pg 168. Rigid Gasket Seal -- Panel Feedthrough Jack Receptacle 0.5 Dia. [.020] 11.2 [.450] VSWR (GHz) 1.04 + .009f RF Leakage (dB) -(90-fGHz) 5.3 Dia. [.210] Rigid Gasket 1.6 [.064] Dia. Plating Part No. Passivated stainless steel 6059665-1 Installation Thermal Limit: 250C. Recommended Mounting Hole Detail A follows, pg 168. Field Replaceable Solder and Braze-In Panel Feedthrough Plug Receptacle 5.3 Dia. [.210] 9.9 [.390] 4.0 + 0.05 - 0.03 Dia. [.158 + .002] - .001 5.6 0.13 [.220 .005] 0.5 0.03 Dia. [.020 .001] Glass Seal VSWR (GHz) 1.06 + .01f RF Leakage (dB) -(90-fGHz) Plating Part No. Passivated stainless steel 1059637-1 Recommended Mounting Detail B or E follows, pg 168. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 167 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSP Miniature Modular Blind Mate Connectors (Continued) Hermetically Sealed (Continued) Field Replaceable Solder and Braze-In (Continued) Panel Feedthrough Jack Receptacle 4.0 + 0.05 - 0.03 Dia. [.158 + .002] - .001 5.6 0.13 [.220 .005] 10.7 [.421] VSWR (GHz) 1.06 + .01f 0.5 0.03 Dia. [.020 .001] Glass Seal RF Leakage (dB) -(90-fGHz) Plating Part No. Passivated stainless steel 1059671-1 Recommended Mounting Detail B or E follows at bottom of this page. 2-Hole Flange Mount Plug Receptacle With EMI/RFI Gasket -- 0.5 [.018] Dia. Contact 2.8 + 0.05 6.4 Dia. [.250] - 0.03 [.112 + .002] - .001 2.6 Dia. [.102] 2 Plcs. 15.9 [.625] Dia. 12.2 [.481] 8.0 0.13 [.315 .005] 9.5 [.375] VSWR (GHz) 1.06 + .01f RF Leakage (dB) -(90-fGHz) 0.5 0.03 [.018 .001] Dia. 6.6 [.260] Plating Part No. Passivated stainless steel 1059572-1 Recommended Mounting Detail D follows at bottom of this page. Recommended Mounting Hole Detail Detail A* 5.5 0.03 [.218 .001] Dia. Detail B* (6.35 [.250] Panel Thickness) 1.7 0.03 [.066 .001] Dia. 6.4 [.250] Ref. Panel 6.4 0.08 [.250 .003] Ref. Panel Detail D* Detail C* 3.2 0.13 [.125 .005] Panel 2.6 0.03 [.102 .001] Dia. .000 4.1 +- 0.05 Dia. .000 [.162 +- .002 ] 5.5 0.03 [.218 .001] Dia. Detail E* 3.2 0.13 [.125 .005] 5.5 0.03 [.218 .001] Dia. Panel 12.2 [.481] Ref. 2.9 0.03 [.115 .001] Dia. 12.2 [.481] Ref. 3.2 0.03 [.125 .001] .000 4.1 +- 0.03 7.6 0.08 [.300 .003] Ref. Panel Dia. .000 [.162 +- .001 ] *Consult appropriate Instruction Sheet for complete mounting details. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 168 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors Product Facts Subminiature version of OSP Blind Mate Connectors For space savings Family of connectors and adapters OSSP connectors are a subminiature version of the OSP blind mate series. Connectors in this series incorporate the design elements of the OSP interface including the float and mismate features. OSSP blind mates are about 40% smaller than OSP connectors and are designed to be Engineering Data A complete family of OSSP connectors and adapters is available including cable connectors, fixed and float mount panel connectors and hermetic connectors. Rigid mount units will function to specifications up to .064 [.0025] radial misalignment with the mating plug connector. Applications requiring greater than .064 [.0025] radial misalignment can use either the float design or floating connector plates with guide pins. Mechanical Impedance -- Frequency -- Temperature Rating -- 50 ohms dc to 28.0 GHz -65 to 125 C Electrical RG 405 (.085) Semi-Rigid VSWR -- RF Transmission Loss -- Insulation Resistance -- Contact Resistance -- Center Contact Outer Contact Outer Contact to Cable Dielectric Withstanding Voltage -- Corona Extinction Voltage at 70,000 Ft.-- RF High Potential at 5 MHz -- RF Leakage Interface Only -- Power Handling -- 1.05 + .01f (GHz) -.040 x f (GHz) 5,000 megohms min. Force to Engage -- Force to Disengage -- Center Contact Retention -- Durablilty -- Radial Misalignment -- Rigid Mount Float Mount 3 pounds max. 1.5 pounds max. 4 pounds min. 1,000 Cycles .06 [.0025] .51 [.020] Mating Characteristics 6.0 milliohms max. 3.0 milliohms max. 0.5 milliohms max. 675 volts RMS 250 volts min. 675 volts RMS -(90-fGHz) dB min. (fully mated) 300W at 3 GHz (sea level) and room temperature Environmental Corrosion -- Vibration -- Shock -- Temperature Cycling -- Moisture Resistance -- used in applications where space is at a premium. Method 101, Condition B, MIL-STD-202 Method 204, Condition D, 20G's, MIL-STD-202 Method 213, Condition I, 100G's, MIL-STD-202 Method 107, Condition B, MIL-STD-202 Method 106, MIL-STD-202 Jack Connector -- Center Contact Socket Oversize test Pin -- .533 + .003 [.0210 + .0001] dia. Test Pin Finish -- 16 micro inch max. Insertion Depth -- .76/1.14 [.030/.045] Number of Insertions -- 3 Insertion Force Test Pin -- .528 + .003 [.0208 + .0001] dia. Test Pin Finish -- 16 micro inch Insertion Force -- 3 pounds max. Withdrawal Force Test Pin -- .495 + .003 [.0195 - .0001] dia. Test Pin Finish -- 16 micro inch max. Insertion Depth -- 1.27/1.91 [.050/.075] Withdrawal -- 1/2 ounce min. Finish Center Contact -- Housing -- Gold plate per MIL-G-45204, Type II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 Gold plate per MIL-G-45204, Type II, Class 0 over nickel plate per QQ-N-290, Class 2 or passivate per ASTM-A380 Material Housing -- Center Contact -- Dielectric -- Gasket (O'Ring) -- Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582 Beryllium copper per ASTM-B-196 TFE fluorocarbon per ASTM-D-1457 MIL-P-25732 169 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) Interface Mating Dimensions The connector interface, specifically designed for multiple interconnects, maintains reliable performance over the typical mechanical tolerance required in cost effective packaging. The interface test data shows excellent performance is maintained with mating gaps up to .015 inch. Jack Description A 1.22 Nom. 0.48 1.22 Nom. 0.48 Jack Plug Plug B 3.91 Min. .154 3.56 .140 Nom. Dimensions C D 5.33 Ref. 5.00 Nom.* .210 .197 5.33 Ref. 5.00 .210 .199 Min. E 3.35 Max. .132 0.51 .020 Nom. F 3.23 Max.* .127 3.25 .128 Min. *With spring bottomed. 170 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) For Semi-Rigid Cable, Direct Solder Attachment Bulkhead Feedthrough Cable Plug -- Rear Mount 2.3 Dia. Min. [.089] 4.6 0.03 Dia. [.180 .001] 17.5 [.690] d e 3.0 Dia. [.120] Cable RG 405/U, 2.16 [.085] Flange Mount Cable Jack -- Floating Rear Mount 0.08 7.1 +- 0.00 Dia. + .003 ] [.281 - .000 3.0 Dia. [.120] [. 7.3 Max. [.289] 0.03 4.6 +- .000 Dia. .001 ] [ .182 +- .000 Recommended Mounting Hole Plating Part No. Gold 1059857-1 2.4 Dia. [.093] 2 Plcs. 14.7 Dia. [.580] 11.0 0.10 [.435 .004] 0.08 7.1 +- 0.00 Dia. + .003 ] [.281 - .000 11.0 [.435] 0.00 7.1 +- 0.05 Dia. + .000 [.280 - .002 ] 18.0 [.710] 5.5 [.217] 2.3 [.089] Dia. 7.6 [.300] ded ole Cable RG 405/U, 2.16 [.085] 0.00 7.1 +- 0.05 Dia. + .000 [.280 - .002 ] Recommended Mounting Hole Part No. 1059868-1 Finish: Inner housing that is soldered to cable is gold plated. Outer housing is passivated stainless steel. When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector. Feedthrough Snap-In 0.08 7.1 +- 0.00 + .003 [.280 - .000 ] 12.7 Ref. [.500] 11.4 Ref. [.450] 0.05 6.5 +- 0.00 + .002 Dia. [.256 - .000 ] 18.0 [.710] 14.7 [.570] Compression Spring 6.1 Dia. Connector [.240] Retaining Clip 7.6 Dia. [.300] Max. 3.0 Dia. [.120] Cable RG 405/U, 2.16 [.085] Part No. 1059874-1 Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 171 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) For Flexible Cable, Crimp Attachment Bulkhead Feedthrough Cable Plug -- Rear Mount 4.6 0.03 Dia. [.180 .001] 4 [.1 0.03 4.6 +- .000 Dia. + .001 [.182 - .000 ] 33.0 Ref. [1.298] d Recommended Mounting Hole Cable RG 188/U, 316 Double Braided Only RG 174/U, 188/U, 316U Flange Mount Cable Jack -- Floating Rear Mount Plating Part No. Passivated Stainless Steel 1059884-1 Passivated Stainless Steel 1059886-1 2.4 Dia. [.093] 2 Plcs. 0.08 .1 +- 0.00 Dia. + .003 81 - .000 ] 14.7 Dia. [.580] 11.0 0.10 [.435 .004] 0.08 7.1 +- 0.00 Dia. + .003 [.281 - .000 ] 11.0 [.435] 0.00 7.1 +- 0.05 Dia. 35.6 [1.40] Max. + .000 [.280 - .002 ] 7.6 [.300] Cable RG 188/U, 316 Double Braided Only RG 174/U, 188/U, 316U Feedthrough Snap-In Cable Jack 0.08 7.1 +- 0.00 + .003 Dia. [.280 - .000 ] Mounting Hole 6.1 Dia. [.240] OSSP Jack 0.00 7.1 +- 0.05 D 5.5 [.217] + .000 [.280 - .002 ] Recommended Mounting Hole Plating Part No. Passivated Stainless Steel 1059888-1 Passivated Stainless Steel 1059887-1 35.6 Max. [1.400] 22.4 0.38 [.880 .015] Compression Spring 0.05 6.5 +- 0.00 + .002 Dia. [.256 - .000 ] Mounting Hole Part No. 1059889-1 Connector Retaining Clip Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 172 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) For Panel Mount Threaded Panel Feedthrough Plug Receptacle, Straight Terminal 0.4 Dia. [.015] 11.4 [.450] 4.0 Dia. [.156] 4.1 0.03 Dia. [.162 .001] 5.3 0.05 [.210 .002] 1.2 Dia. [.049] 1.3 0.03 Dia. [.051 .001] Plating Passivated Stainless Steel 6.4 [.250] Part No. 1059903-1 Recommended Mounting Hole Press-Fit Panel Feedthrough Plug Receptacle 0.08 O 4.0 +- 0.00 + .003 [.159 - .000 ] Straight Knurl 0.05 11.4 +- 0.00 + .002 [.450 - .000 ] 5.1 [.200] 6.4 [.250] 5.3 0.05 [.210 .002] O 4.0 0.03 [.156 .001] OSSP Plug O-Ring O 0.4 0.03 [.015 .001] Part No. 1059901-1 O 0.9 0.03 [.034 .001] O 3.9 [.154 + 0.00 - 0.05 + .000 - .002 ] Recommended Mounting Hole Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 173 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) For Printed Circuit Board Mount Straight Plug Receptacle -- Captured Contact 8.7 [.343] OSSP Plug 12.6 [.498] 6.4 [.250] Sq. Mounting Surface 5.1 [.200] 5.1 Typ. [.200] 0.08 O 1.7 +- 0.00 Hole + .003 [.067 - .000 ] Typ. 5 Plcs. 5.1 [.200] O 0.9 [.034] O-Ring 1.0 Sq. [.040] Typ. 4 Plcs. Recommended Mounting Hole Part No. 1059919-1 Right-Angle Plug Receptacle 5.84 [.230] 5.08 0.51 [.200 .020] 6.35 [.250] Sq. 5.08 Typ. [.200] 5.08 [.200] Typ. 0.08 O 1.7 +- 0.00 Hole + .003 [.067 - .000 ] Typ. 5 Plcs. 5.08 [.200] 17.78 0.25 [.700 .010] O 0.86 [.034] 14.61 [.575] O-Ring 1.02 Sq. [.040] 4 Plcs. Recommended Mounting Hole 5.11 0.03 [.201 .001] Part Number 1484546-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 174 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors OSSP Subminiature Modular Blind Mate Connectors (Continued) Hermetically Sealed Metal to Metal Formable Gasket -- Panel Feedthrough Plug Receptacle 1.0 Dia. [.039] 3.6 Dia. [.140] 12.1 [.475] VSWR (GHz) 1.06 + .01f 3.0 Dia. [.118] .03 Dia. [.012] RF Leakage (dB) -(85-fGHz) Plating Part No. Gold 1059905-1 Recommended Mounting Hole Detail A at bottom of this page. 0.00 4.8 +- 0.05 Dia. Solder and Braze-In Panel Feedthrough Plug Receptacle 5.3 Dia. [.210] + .000 [.189 - .002 ] 8.2 [.322] Ref. VSWR (GHz) 1.06 + .01f 0.5 0.03 Dia. [.020 .001] RF Leakage (dB) -(85-fGHz) Plating Part No. Gold 1059902-1 Recommended Mounting Hole Detail B at bottom of this page. Field Replaceable Solder and Braze-In 2-Hole Flange Mount Plug Receptacle With EMI/RFI Gasket 1.9 + 0.05 - 0.03 [.076 + .002] - .001 5.3 Dia. [.210] 2.4 Dia. [.093] 2 Plcs. Dia. 12.2 Dia. [.480] 9.0 [.353] 9.5 [.375] VSWR (GHz) 1.06 + .01f 8.2 0.13 [.322 .005] RF Leakage (dB) -(85-fGHz) 0.3 0.03 [.012 .001] Dia. 5.7 [.223] Plating Part No. Passivated Stainless Steel 1059894-1 Recommended Mounting Hole Detail C at bottom of this page. Recommended Mounting Hole Detail for Hermetically Sealed Detail A* .003 4.1 +- 0.05 3.2 0.03 [.121 .001] Detail C* 2.5 [.100] 0.08 0.8 +- 0.00 .000 1.0 +- 0.03 + .000 Dia. .001 Dia. [.041 - .001 ] ] [.162 +- .002 6.4 [.250] Ref. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Detail B* + .003 [.031 - .000 ] R 0.08 Max. [.003] 0.08 R 0.13 +- 0.03 + .003 [.005 - .001 ] Dia. 0.05 O 5.5 +- 0.03 + .002 [.218 - .001 ] 3.2 0.13 [.125 .005] Panel 2.0 0.03 [.078 .001] Dia. 9.0 [.353] Ref. 0.03 O 4.8 +- 0.00 + .001 [.190 - .000 ] *Consult appropriate Instruction Sheet for complete mounting procedure. 175 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 MIL-Type connectors available Straight plugs and jacks are completely crimp terminated Fast easy cable assembly Low VSWR Standard military, commercial or Tyco Electronics tooling Listed under the Component Program of Underwriters Laboratories Inc., File No. E81956 PC Board soldered connectors are recognized under the Component Program of Underwriters Laboratories Inc., File No. E81956 R R Certified by Canadian Standards Association File No. LR 7189 R SMB Connectors are available in commercial and high rel versions. They are ideally suited for circuit miniaturization and are offered in a wide range of configurations including plugs, right-angle plugs, jacks, bulkhead jacks and adapters, as well as printed circuit board and solder jacks. Termination costs are kept to a minimum using plugs and jacks with a crimp center contact and hex crimp outer braid. Both hand held tooling and pneumatic bench-mounted tooling is available. Easily assembled right-angle plugs have a hex crimp on the outer braid ferrule and bifurcated solder center contacts. Tyco Electronics' 75 Ohm BT 43 SMB Connectors feature unique spring mating with snap-fit couplings for quick connect/disconnect. These connectors are designed to be intermateable with 75 Ohm SMB MIL-C-39012 connectors. They also feature reliable dual crimp cable terminations. Packaging -- All connectors are packaged individually unless otherwise noted under the "Military No. and/or Comments" column in the connector specifications chart. Between Series Adapters For SMB Between Series Adapters, please see pages 251-260. 176 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connector Specifications Electrical Characteristics Environmental Characteristics Impedance -- 50 ohms and 75 ohms, nominal Frequency Range -- 0 to 4.0 GHz Voltage Rating (VRMS) -- Sea Level 70,000 Feet 50 ohm connectors for RG 178/U series cable 300 75 50 ohm connectors for RG 316/U series cable 400 100 75 ohm connectors for RG 179/U series cable 300 75 75 ohm connectors for RG 195/U series cable 500 125 Insulations Resistance -- 1000 megohms min. Contact Resistance -- (milliohms max.) After Initial Environment Center contact 6.0 8.0 Outer contact 1.0 1.5 Braid to body 1.0 N/A Contact Current Rating -- 1.5 amps DC max. Voltage Standing Wave Ratio (VSWR0 -- to 4.0 GHz or 80% of upper cutoff frequency of the cable, whichever is lower. Temperature Rating -- -65C to +165C Corrosion (salt spray) -- MIL-STD-202, Method 101, test condition B, 5% salt solution Vibration High Frequency -- MIL-STD-202, Method 204, test condition B (15 G's) Shock -- MIL-STD-202, Method 213, test condition B, 75 G's at 6 milliseconds, 1 2 sine Thermal Shock -- MIL-STD-202, Method 107, test condition B, except high temperature shall be +85C. High temperature shall be +200C for connectors using 200C cables. Moisture Resistance -- MIL-STD-202, Method 106, when interface gasket is used. No measurements of high humidity. Insulation resistance shall be 200 megohms minimum within five minutes after removal from humidity. Durability Test -- Conducted per MIL-C-39012 Reg. Para. 3.15, Method Para. 4.6.12 Mating Engagement Straight Right-Angle 1.30 + .04F 1.45 + .06F 1.25 + .04F 1.35 + .04F Cable RG 178/U Series RG 316/U Series F=GHz, does not apply to 75 ohm connectors. Materials Body, Body Components and Male Contacts -- Brass, half hard, per QQ-B-626, Alloy 360, Zinc per QQ-Z-363 Female Contacts -- Beryllium copper per QQ-C-530, heat treated per MIL-H-7199 Insulators -- TFE fluorocarbon per ASTM D 1710, Type 1, Grade 1 Lockwashers -- Phosphor bronze per QQ-B-750 Crimp Ferrule -- Annealed copper alloy per WW-T-799 Gaskets -- Silicone rubber per ZZ-R-765, Class 11B, Grade 65-75 RF High Potential Withstanding Voltage Frequency -- 5 MHZ Leakage Current -- N/A 50 ohm connectors for RG 178/U series cable 50 ohm connectors for RG 316/U series cable 75 ohm connectors for RG 179/U series cable 75 ohm connectors for RG 195/U series cable RF Leakage -- -55 dB min. at 2-3 GHz Insertion Loss -- .30dB max. at 3 GHz Plating Center Contacts -- 0.00127 [.000050] min. Gold per MIL-G-452048 Type 1, Grade C, Class 1, over 0.00254 [.000100] min. nickel per QQ-N-290 Other Metal Parts -- Gold, Nickel or Solder plated to meet the Finish and Corrosion requirements of MIL-C-39012 675 VRMS 950 VRMS 950 VRMS 1225 VRMS Mechanical Characteristics Engagement Forces -- 14 lbs. [62.3 N] maximum engagement initially. After 500 matings, 14 lbs. [62.3 N] maximum engagement and 2 lbs. [8.8 N] minimum disengagement for all of SMBs. Cable Attachment -- Straight Connectors -- Crimp, both center contact and braid Right-Angle Connectors -- Crimp on braid and bifurcated solder center contact Durability -- 500 cycles per MIL-C-39012 Contact Captivation -- When captivated, the contacts will withstand 4.0 lbs. minimum axial force. Cable Retention -- When properly assembled to the compatible braided coaxial cable, the retention is equal to the breaking strength of the cable. Marking -- Per MIL-STD-130 177 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm Straight Plugs 6.35 [.250] Max. 21.10 [.830] Max. Center Contact Plating RG/U Cable 178, 178A, 178B, 196, 196A 174, 316, 188, 188A 179, 179A, 179B, 161, 187, 187A, BELDEN 9221 RG 316, 188 Double Braid Right-Angle Plugs Outer Contact Plating Other Metal Parts Plating Dielectric Style Gold Gold Nickel TEFLON MIL Type 413985-6 Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Nickel Gold Nickel Gold Gold Nickel Gold Gold Gold Nickel Gold Nickel Nickel Nickel Nickel Nickel Nickel Nickel Gold Nickel Nickel Nickel TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON MIL Type MIL Type MIL Type Die Cast Die Cast MIL Type Die Cast Die Cast MIL Type MIL Type Die Cast MIL Type 413985-1 413985-3 413985-7 414946-1 5414946-2 1-413985-1 5414946-5 5414946-6 413985-2 413985-4 5414946-3 413985-8 MIL Type Die Cast 13.71 Max. [.540] 13.71 [.540] Max. 6.35 Dia. [.250] 6.35 [.250] Dia. RG/U Cable 178, 178A, 178B, 196, 196A 174, 316, 188, 188A 179, 179A, 179B 161, 187, 187A BELDEN 9221 RG 316, 188 Double Braid BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Part No. 13.21 [.520] Max. 13.21 [.520] Max. Center Contact Plating Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Gold Outer Contact Plating Gold Gold Gold Gold Gold Nickel Gold Nickel Gold Gold Gold Other Metal Parts Plating Gold Nickel Nickel Gold Nickel Nickel Nickel Nickel Gold Nickel Nickel Dielectric Style Part No. TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON TEFLON MIL Type MIL Type Die Cast MIL Type MIL Type MIL Type Die Cast Die Cast MIL Type MIL Type Die Cast 414002-7 414002-8 5414363-8 414002-1 414002-3 414002-5 5414363-3 5414363-5 414002-2 414002-4 5414363-4 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 178 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) Straight Jacks Commercial Jack MIL Type Jack 5.56 Hex. [.219] 25.40 [1.000] Die Cast Brass RG/U Cable 178, 178A, 178B, 196, 196A 174, 316, 188, 188A RD 316, 188 Double Braid Center Contact Plating Gold Gold Gold Gold Body Plating Dielectric Style Jack Part No. Nickel Nickel Nickel Nickel TEFLON TEFLON TEFLON TEFLON MIL Type MIL Type Die Cast Commercial 5414170-2 5414170-1 414948-1 414948-3 Bulkhead Jacks 6.35 [.250 ] Hex. 5/4.88 Dia. [.197/.192] 28.60 [1.120] RG/U Cable 2.08/2.01 [.082/.079] 174, 316, 188,188A RD 316, 188 Double Braid Center Contact Plating Gold Gold Gold Body Plating Dielectric Style Nickel Nickel Nickel TEFLON TEFLON TEFLON Commercial Commercial Commercial Bulkhead Jack. Part No. 5415006-1 5228217-1 5415006-2 Maximum Panel Thickness 2.36 [.093] Recommended Panel Cutout for Bulkhead Jack and Adapter Bulkhead Jack Adapter (Jack-Jack) 6.35 [.250] Hex. 17.53 Max. [.690] Type Jack-To-Jack TEFLON is a trademark of E.I. Dupont de Nemours and Company. Center Contact Plating Gold Gold Body Plating Dielectric Style Part No. Nickel Gold TEFLON TEFLON MIL Type MIL Type 228553-1 228553-2 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 179 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) PC Board Vertical Jacks 5.08 [.200] O 1.60 [.063] 4 Plcs. 2.54 [.100] A 5.08 [.200] O 1.19 [.047] B Recommended PC Board Layout Jacks Type Center Contact Plating Body Plating Dim. A Dim. B -- Gold Gold -- Gold Nickel -- Gold Nickel 7.62 .300 7.62 .300 10.16 .400 3.94 .155 3.94 .155 3.94 .155 2.54 .100 8.25 Max. .325 -- Gold Tin Dielectric Style Part No. TEFLON MIL Type 413990-1 TEFLON MIL Type 413990-2 TEFLON MIL Type 414612-2 TEFLON Brass, Stamped 5221111-1 PC Board Vertical Plugs 11.53 0.20 [.454 .008] A B 6.35 [.250] Sq. 3.94 0.13 [.155 .005] 0.64 [.025] 6.32 [.249] 5.08 0.05 [.200 .002] O 1.60 4 Plcs. [.063] 1.02 0.05 Typ. [.040 .002] O 6.35 [.250] O 0.97 0.03 [.038 .001] 2.54 [.100] 5.08 [.200] O 1.19 [.047] Recommended PC Board Layout 1.42 Typ. [.056] Plugs TEFLON is a trademark of E.I. Dupont de Nemours and Company. Type Center Contact Plating Body Plating Dim. A Dim. B Dielectric Recommended PC Board Layout Style Part No. Low Profile (Plug) Mated Pair Gold Nickel 3.94 .155 7.62 300 TEFLON B MIL Type 415774-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 180 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) PC Board, Right-Angle Jacks Jack Low Profile Jack with Standoff Pads 12.70 [.500] 13.46 [.530] A Bulkhead Jack 19.87 [.782] A A B B B Jacks Type Center Contact Plating Interface Body Plating PCB Leg Plating Dielectric Dim. A Dim. B Style Recommended PC Board Layout Part No. Gold Gold Gold TEFLON A 413996-2 Nickel Nickel TEFLON MIL Type A 413996-4 Gold Gold Gold TEFLON Die Cast A 415340-1 Gold Gold Gold TEFLON Die Cast A 415672-1 Gold Gold Gold TEFLON MIL Type A 414026-2 Gold Nickel Nickel TEFLON MIL Type A 414026-3 Gold Nickel Tin-Lead TEFLON Die Cast A 5414337-1 Gold Nickel Nickel TEFLON Die Cast B 5415379-1* Gold Nickel Nickel TEFLON Die Cast A 415381-1 Gold Gold Gold TEFLON 3.94 .155 3.94 .155 2.79 .110 2.79 .110 3.94 .155 3.94 .155 3.94 .155 2.79 .110 3.94 .155 2.79 .110 3.94 .155 2.79 .110 MIL Type Gold 7.11 .280 7.11 .280 7.11 .280 8.76 .345 8.51 .335 8.76 .345 8.76 .345 8.76 .345 8.51 .335 7.67 .302 9.78 .385 7.67 .302 Die Cast A 414963-1 Brass, Stamped C 5228435-1 Die Cast A 1274330-1 Low Profile With Standoff Pads Bulkhead Commercial Gold Nickel Tin Polypropylene Bulkhead Gold Gold Gold TEFLON * 5 leg design PC Board, Right-Angle Plug 5.08 [.200] 2.54 [.100] 13.46 [.530] 6.35 Dia. [.250] A 1.75 Dia. [.069] Min. (4 Holes) 5.08 [.200] 1.24 Dia. [.049] Min. O 1.75 [.069] 4 Plcs. 2.54 [.100] 5.08 [.200] O 1.32 [.052] 5 Plcs. 2.54 [.100] 5.08 [.200] O 1.24 0.05 [.049 .002] 5.08 [.200] B A B 5.08 [.200] C Recommended PC Board Layouts Plugs TEFLON is a trademark of E.I. Dupont de Nemours and Company. Center Contact Plating Interface Body Plating PCB Leg Plating Dielectric Dim. A Dim. B Style Recommended PC Board Layout Gold Nickel Nickel TEFLON B Nickel Tin TEFLON 2.79 .110 3.94 .155 Die Cast Gold 8.76 .345 8.76 .345 Die Cast A Part No. 415380-1* 5414338-1 * 5 leg design Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 181 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) Bulkhead PC Board Jack, Solder Receptacle Kits 5/4.88 [.197/.192] Dia. 6.35 Hex. [.250] 3.71 [.146] 2.08/2.01 [.082/.079] 16.0 Max. [.630] Kit Includes Lockwasher and Jam Nut Type Lockwasher and Jam Nut Front Mount Rear Mount Center Contact Plating Gold Gold Maximum Panel Thickness 2.36 [.093] Recommended Panel Cutout Body Plating Dielectric Style Nickel Nickel TEFLON TEFLON MIL Type MIL Type Kit Part No. 228216-1* 228215-1* *includes Jam Nut and Lockwasher Part No. 415001-2 Part No. 414969-2 SMB Receptacle Jack 4.45 [.175] 2.92 [.115] 3.18 [.125] 3.68 Dia. [.145] 0.97 0.13 Dia. [.038 .001] 6.99 [.275] 1.02 [.040] 3.45 [.136] Ref. Plane 6.35 Hex [.250] 10-32 UNEF-2A Type Front Mount TEFLON is a trademark of E.I. Dupont de Nemours and Company. Center Contact Plating Gold Body Plating Dielectric Style Part No. Nickel TEFLON MIL Type 414895-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 182 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, Mini 75 Ohm Product Facts Industry standard for miniature 75 ohm SMB SMB offers snap-fit coupling for quick connect/disconnect Suitable for high density applications Fast easy cable assembly Low VSWR Connectors offer consistent mating and unmating forces Straight plugs and jacks are completely crimp terminated Low cost Mini 75 ohm SMB connectors are ideally suited for circuit miniaturization in communication, broadband and switching equipment as well as a variety of other applications. They offer the same low consistent mating/unmating force as Tyco Electronics standard SMB products and therefore, outer contact resistance values are maintained from connector to connector. Standard military, commercial or Tyco Electronics tooling can be used to terminate these products. Cost effective assembly of the straight plugs is completed with a crimp center contact and hex crimp on the outer braid. Right-angle plugs have a hex crimp on the outer braid ferrule and bifurcated solder center contacts. Electrical Characteristics Impedance -- 75 ohms Frequency Range -- 0 to 4.0 GHz Insulation Resistance -- 1000 megohms Contact Current Rating -- 1.5 amps DC max. Mechanical Characteristics Engagement Forces -- Initial--14.0 lbs. [62.3 N] maximum engagement. After 500 matings, 14.0 lbs. [62.3 N] maximum engagement. Durability--500 cycles Environmental Characteristics Temperature Rating -- -65C to +165C 183 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, Mini 75 Ohm (Continued) Straight Plug O 1.73 [.068] O 6.35 [.250] O 2.64 [.104] 17.78 Ref. [.700] Center Contact Plating Gold Gold Gold RG Cable 179, 187 179, 187 RD 179 Right-Angle Plug Outer Contact Plating Gold Nickel Nickel Body Plating Nickel Nickel Nickel Part No. 5415487-1 5415487-2 5415487-3 13.7 Max. [.539] 10.21 Ref. [.402] O 6.35 [.250] 9.78 0.25 [.385 .010] Center Contact Plating Gold Gold Gold RG Cable 179, 187 179, 187 RD 179 Bulkhead Jack Outer Contact Plating Nickel Gold Gold 16.0 Ref. [.630] Body Plating Nickel Nickel Nickel Part No. 5415484-1 5415484-2 5415484-3 22.86 Max. [.900] O 3.66 0.05 [.144 .002] O 5.03 [.198] 4.52 [.178] 9.7 [0.38] Recommended PC Board Layout 10.92 [.430] 6.35 Hex. [.250] RG Cable 179, 187 Center Contact Plating Gold Body Plating Nickel Part No. 415500-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 184 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, Mini 75 Ohm (Continued) Vertical PC Board Jacks 5.08 0.08 [.200 .003] 7.62 0.18 [.300 .007] 2.54 0.08 [.100 .003] O 0.71 0.08 [.028 .003] O 3.67 Max. [.145] O 1.32 0.08 [.052 .003] 4 Plcs. Leg Length 2.11 .083 3.05 .120 3.05 .120 3.18 [.125] Right-Angle PC Board Jacks 5.08 0.08 [.200 .003] Recommended PC Board Layout Center Contact Plating Body Plating Part No. Gold Gold Flash 415504-2 Gold Gold 415504-3 Gold Gold Flash 415504-4 5.54 [.218] 5.08 0.08 [.200 .003] 7.95 0.25 [.313 .010] 2.54 0.08 [.100 .003] O 0.71 0.08 [.028 .003] 5.08 0.08 [.200 .003] 14.1 [.555] O 1.32 0.08 [.052 .003] 4 Plcs. Recommended PC Board Layout O 3.71 Max. [.146] Leg Length 2.79 .110 2.79 .110 2.11 .083 2.11 .083 4.50 [.177] Right-Angle PC Board Bulkhead Jacks Center Contact Plating Body Plating Part No. Gold Gold 415490-1 Gold Nickel 415490-2 Gold Gold 415490-3 Gold Nickel 415490-4 2.79 [.110] 5.08 0.08 [.200 .003] 2.54 0.08 [.100 .003] O 0.71 0.08 [.028 .003] 19.94 [.785] 2.36 Max. [.093] Panel Thickness 11.18 [.440] 5.08 0.08 [.200 .003] O 1.32 0.08 [.052 .003] 4 Plcs. Recommended PC Board Layout O 3.71 Max. [.146] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Leg Length 2.79 .110 2.79 .110 2.79 .110 Center Contact Plating Body Plating Part No. Gold Nickel 415377-1 Gold Gold 415377-2 Gold Gold 415377-5* *Isolated. 185 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) Product Facts Widely used in data transmission and telecommunication applications BT 43 connector developed from the SMB range and feature snap-on and latching variant Most BT 43 connectors are available as fully crimped connectors. BT 43 and 75 connectors available in solder and crimp versions The Tyco Electronics range of 75 ohm SMB (SMZ) connectors are designed to meet the increasing demands of the Telecommunications market, and are designed in accordance with BS9210 F0022. Specifications Max working voltage (dc) -- 500 V Max proof voltage (dc) -- 1.5 kV Contact resistance (inner) -- 5 milliohm Contact resistance (outer) -- 1 milliohm Bodies and other parts -- Brass Female center contacts -- Copper Alloy Male center contacts -- Copper Alloy Outer contacts -- BeCu Plating -- Contacts and critical surfaces -- Gold Other parts -- Nickel Insulators -- P.T.F.E. 186 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) Straight Plugs, Snap-On 30.5 Assembled [1.20] 28.0 [1.10] 8.8 Dia. [0.35] Cable Type RG 179B/U BT2002 20.4 [0.80] Termination Method Inner Outer Crimp Crimp Crimp Crimp Straight Plugs, Latching, Crimp/Crimp Body Plating Part No. Selective Gold Selective Gold 1311097-1 1311098-1 29.9 Assembly [1.18] 27.8 [1.09] Cable Type RG 179B/U BT2003 BT2002 BT2001 BT3002, TZC75024 RG 59B/U, RG 140/U, URM90 9.6 Dia. [0.38] Body Plating Selective Gold Selective Gold Selective Gold Selective Gold Selective Gold Part No 1311099-1 1311100-1 1311101-1 1311696-1 1311102-1 Selective Gold 1313507-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 187 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) Right-Angle Socket, Snap-On, Solder/Crimp 17.93 Max. [0.71] 21.67 Max. [0.85] 16.86 [0.66] 10.16 Max. Max. [0.40] Cable Type RG 179B/U BT3002, TZC75024 Body Plating Selective Gold Selective Gold Right-Angle Socket, Latching, Solder/Crimp Part No 1311103-1 1311104-1 23.0 Ref. [0.91] 21.0 Ref. [0.83] 16.3 Ref. [0.64] 9.9 Ref. [0.39] Cable Type RG 179B/U BT2003 BT3002, TZC75024 RG 59B/U, RG 140/U Body Plating Selective Gold Selective Gold Selective Gold Selective Gold Part No 1311106-1 1311698-1 1311111-1 1313508-1 30.4 Assembled [1.20] Straight Free Plug, Crimp/Crimp 20.2 [0.80] 8.82 Dia. [0.35] Cable Type RG 179B/U 5.60 [0.22] Body Plating Selective Gold Part No 1408041-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 188 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) 30.8 Assembled [1.21] Straight Bulkhead Plug 28.5 [1.12] 10.8 [0.43] 3.0 Max [0.12] Panel 8.4 [0.33] Dia. 5.6 [0.22] 7.5 [0.30] Mounting Detail Cable Type RG 179B/U BT500B, BT2003, BT2003A BT3002, TZC75024 Termination Method Inner Outer Crimp Crimp Body Plating Part No. Selective Gold 1311120-1 Crimp Crimp Selective Gold 1311701-1 Crimp Crimp Selective Gold 1311122-1 32.1 Assembled Length [1.26] 10.75 0.05 [0.42 .002] 9.50 0.10 [0.37 .004] 7.50 A/F [0.30] Panel Cut Out Cable Type 3M: 043, 031C, CS4456, Gore: GCX 8.00 Dia. [0.31] Termination Method Inner Outer Body Plating Part No. Crimp Selective Gold 1313511-1 Right-Angle Bulkhead Plug, Solder/Crimp Crimp 20.4 [0.80] 16.7 Ref. [0.66] 21.5 Ref. [0.85] 10.1 Ref. [0.40] Cable Type RG 179B/U Body Plating Selective Gold Part No 1311115-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 189 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) 30.4 Assembled [1.20] DDF Plug, Crimp/Crimp 27.9 [1.10] 10.3 Dia. [0.41] Cable Type RG 179B/U BT2003 BT2002 B2001 BT3002, TZC75024 RG 59B/U, RG 140/U, URM90 Body Plating Selective Gold Selective Gold Selective Gold Selective Gold Selective Gold Part No 1327083-1 1311117-1 1311700-1 1313883-1 1311118-1 Selective Gold 1313887-1 DDF Plug, Crimp/Crimp 7.54 Ref. [0.30] 27.8 Ref. [1.09] Cable Type RD179, 124431 (Filotex), 1366 (Orebro), K02253D-1, K02253-2 (Shuner) PC Board Plug 43/1D Body Plating Part No Selective Gold 1314422-1 PC Board Plug 43/1E 11.4 [0.45] 6.20 Dia. [0.24] 3.80 [0.15] 0.90 Dia. [0.04] 5.08 [0.20] 13.2 [0.52] 5.08 [0.20] 15.0 [0.59] 1.70 Dia. [0.07] 4 Holes 5.08 [0.20] 9.5 [0.37] 1.20 Dia. [0.05] 1 Hole 6.5 [0.26] Sq. 1.70 Dia. [0.067] 4 Holes Mounting Detail Body Plating Selective Gold Body Plating Selective Gold 22.14 [.872] 5/16-32 UNEF O 8.21 [.323] 3/8 Across Flats O 8.35 0.10 [.329 .004] O 1.20 Min. [.047] O 1.70 Min. [.067] 4 Holes 2.54 [.100] O 6.22 [.245] 2.90 0.10 [.114 .004] Part No. 1314103-1 5.08 [.200] 5.08 [.200] 14.00 [.551] 1.20 Dia. [0.047] 1 Hole Mounting Detail Part No. 1311125-1 Right-Angle PC Board Plug 5.08 [0.20] 2.54 [.100] Mounting Detail Panel Cutout Detail Part No. 1314102-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 190 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) Straight Adapter Plug-Plug 17.1 [0.67] 17.0 [0.67] 7.5 [0.30] 11.0 Dia. [0.43] 8.7 A/F [0.34] 8.0 Dia. [0.31] 2.2 Max. [0.09] Panel Part No. 1313364-1 Mounting Detail Part No. 1311127-1 Body Plating Selective Gold Selective Gold Tester 430A Part No. 1313364-1 1311127-1 37.4 [1.47] 11.1 [0.44] Dia. 8.8 Dia. [0.35] Body Plating Selective Plating Extraction Tool 65A Part No. 6-1311703-1 100.0 [3.94] 10.0 Dia. [0.39] Part No. 1311164-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 191 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMB Connector Crimp Tooling 50 /75 RG/U Cable Commercial Connector Tooling MIL Type Connector Tooling Center Contact Crimp Tooling Braid Crimp Tooling Center Contact Crimp Tooling Braid Crimp Tooling MIL-CDies for Dies for Dies for MIL-C22520/2-01 Tyco Electronics Tyco Electronics Tyco Electronics 22520/5-01 DANIELS* DANIELS* DANIELS Selector Tool PRO-CRIMPER PRO-CRIMPER PRO-CRIMPER Tool Hand Positioner Hand Position Hand Tool Hand Tool Hand Tool DANIELS* Position DANIELS* Hex Tool Number Tool Number Crimp Die Positioner Number Position Number Position 178, 178A, 178B, 196, 58489-1 196A Double Braid -- 178, 196 174, 316 58489-1 188, 188A Double Braid 174, 316, 58489-1 188 Double Braid 174, 316, 58489-1 188 179, 179A 179B, 161, 58489-1 187, 187A, BELDEN 9221 179, 179A 179B, 161, 58489-1 187, 187A, BELDEN 9221 180, 180A -- 180B Mini SMB 75 ohm 179, 187 -- 179, 187 -- Hex Die Across Flats Female-K699 Male-K727 4 58489-1 A&B Y624 AFM8 Female-K699 Male-K727 4 58483-1 A HX4-1637 2.67 .105 -- -- -- -- -- AFM8 4 58483-1 B HX4-1637 Female-K699 Male-K727 4 58489-1 A Y444 AFM8 Female-K699 Male-K727 Female-K699 Male-K727 4 58483-1 B HX4-1637 3.25 .128 3.25 .128 Female-K699 4 58489-1 C Y196 Location A AFM8 Female-K699 4 58483-1 C HX4-1637 3.84 .151 Male-K727 4 58489-1 C Y196 Location A AFM8 Solder -- 58483-1 B HX4-1637 3.25 .128 Female-K699 4 58489-1 A Y444 AFM8 Female-K699 4 58483-1 B HX4-1637 3.25 .128 Male-K727 4 58489-1 A Y444 -- Solder -- 58483-1 B HX4-1637 3.25 .128 -- -- -- -- -- -- Solder -- 58483-1 C HX4-1637 3.84 .151 Female-K699 Solder Center Contact -- 58483-1 B HX4-1637 -- -- -- -- -- -- -- -- 58483-1 B HX4-1637 -- -- -- -- -- -- -- Note: All 75 ohm SMB connectors have a solder center contact. * DANIELS Manufacturing Corporation 6103 Anno Avenue Orlando, Florida 32809 Telephone: 407-855-6161 FAX: 407-855-6884 Note: Equivalent military tool part numbers- M22520/5-01 - DANIELS Hand Tool HX4 M22520/5-33 - DANIELS Die Set Y136 M22520/5-37 M22520/5-41 M22520/5-03 M22520/2-01 - - - - DANIELS DANIELS DANIELS DANIELS Die Set Y138 Die Set Y140 Die Set Y196 Hand Tool AFM8 BELDEN is a trademark of Belden Wire and Cable Company. DANIELS is a trademark of Daniels Manufacturing Corporation. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 192 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMC Connectors Product Facts Three-piece designs Fast, clean cable assembly Connector bodies preassembled Solderless termination -- no danger of heat damage Center conductor and braid terminated with same tool Low noise level Miniature screw-on coupling TEFLON dielectric The SMC Connector is miniature and light-weight, especially designed for use in critical applications where limited space and vibration are of major concern. Materials Mechanical Characteristics Brass -- QQ-B-626 Beryllium Copper -- QQ-C-530 Copper -- QQ-C-576 TEFLON Insulation -- MIL-P-19468 This connector is designed in accordance with the requirements of Specification MIL-C-39012, Class II, Category B to assure the highest standards of electrical and mechanical performance. It has a constant impedance of 50 ohms, a voltage rating of 350 volts and provides excellent operation at frequencies up to 10 GHz. It also has a threaded coupling and can be used with a wide range of miniature coaxial cable sizes including RG 174, 197, 187, 188 and 316. Gold -- MIL-G-45204 Mating/Unmating -- 10-32 threaded coupling Cable Attachment -- Crimp type, both center contact and braid Coupling Nut Retention -- 35 lb [156 N] min. Cable Retention -- 20 lb [89 N] min., GR-174 cable Durability -- 500 cycles per MIL-C-39012 Plating Electrical Characteristics Nominal Impedance -- 50 ohms Working Voltage -- 335 volts rms Frequency Range -- 0 to 10 GHz Insulation Resistance -- 1000 megohms min. Contact Resistance -- Outer Contact -- 1 milliohms Center Contact -- Straight Connectors -- 6 milliohms Right-Angle Connectors -- 12 milliohms Dielectric Withstanding Voltage -- 1000 volts rms RF Leakage -- -60 dB min., between 2 and 3 GHz RF Insertion Loss -- Straight Connectors -- 0.25 dB max. at 4 GHz Right-Angle Connectors -- 0.50 dB max. at 4 GHz Corona Level -- 250 volts min. at 70,000 ft [21 336 m] Environmental Characteristics Temperature Range -- -65C to +85C Vibration -- MIL-STD-1344, Method 2005, Condition IV Salt Spray -- MIL-STD-1344, Method 1001, Condition B Temperature Cycling -- MIL-STD-1344, Method 1003, Condition A (except low temperature is -65C) TEFLON is a trademark of E.I. Dupont de Nemours and Company. 193 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMC Connectors (Continued) Straight Plugs 26.00 Ref. [1.022] 13.80 Ref. [.545] 3.90 Ref. [.155] Reference Plane 26.00 Ref. [1.022] 13.80 Ref. [.545] 9.50 [.375] 3.90 Ref. [.155] Reference Plane Cable Ref. Plane SMC Plug SMC Plug Part No. 1060221-1 Crimp Cable Attachment Crimp Clamp Straight Jacks 5.50 Hex. [.218] Part No. 1060220-1 1060221-1 1060163-1 6.00 Across [.236] Flats 24.20 Nom. [.953] 10-32, UNF-2A Clamp Nut Sub-Assembly Cable Attachment RG/U Cable 174, 316 188, 188A Clamp Bulkhead Feedthrough Cable Jacks 5.90 Hex. [.234] Part No. 1060163-1 Clamp RG/U Cable 178, 178A, 178B 196, 196A 174, 316 188, 188A 174, 316 188, 188A Crimp Cable Ref. Plane Ref. Plane 5.50 Hex. [.218] 5.90 Hex. [.234] Part No. 1060220-1 Crimp 3.90 [.155] Ref. Cable Ref. Plane SMC Plug 5.50 Hex. [.218] 5.90 Hex. [.234] 16.90 Ref. [.667] 9.50 [.375] Part No. 1311638-1 3.18 [.125] Contact 5.94 [.234] 4.37 [.172] Ferrule Plug Assembly Lockwasher 6.35 Hex. [.250] Recommended Strip Length O 4.88-5.00 [.192-.197] Nut Cable Customer Supplied 19.80 Max. [.780] 2.01-2.08 [.079-.082] Suggested Panel Cutout Cable Attachment Crimp Assembled View RG/U Cable 174, 316 188, 188A Part No. 51751-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 194 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMC Connectors (Continued) Press-In Panel Jacks, Straight Terminal O 0.90 [.035] 1.00 [.039] 5.20 [.205] 3.50 [.138] 5.05 [.199] 4.50 [.177] 5.00 [.197] 2.00 [.079] 16.50 [.650] Part No. 1460470-1 Right-Angle Cable Plug 1.00 Ref. [.040] 14.60 Ref. [.575] 6.40 [.250] SMC Plug 5.90 Hex. [.234] Cable Ref. Plane 15.10 Ref. [.594] Ref. Plane 5.50 Hex. [.218] 6.50 Ref. [.256] Cable Attachment RG/U Cable 174, 316 188, 188A Clamp Part No. 1060183-1 PC Board Jack Receptacles Straight Right-Angle 11.00 [.432] 5.10 Typ. [.200] 1.00 Dia. [.038] .190-32, UNF-2A 3.90 Ref. [.152] SMC Jack 3.90 [.155] 0.50 [.020] 3.20 [.125] 3.90 [.155] 1.30 [.050] 6.20 [.243] 7.40 Ref. [.293] Ref. Plane 1.00 Sq. [.040] 4 Plcs. 6.40 Sq. [.250] 2.50 Typ. [.100] 14.20 Ref. [.563] 1.00 Dia. [.038] 11.40 [.448] .190-32, UNF-2A 6.30 [.250] 1.80 Typ. [.070] 1.80 Typ. [.070] 1.00 Sq. [.040] Typ. 5.10 Typ. [.200] Part No. 1060256-1 7.10 [.280] SMC Jack Part No. 1060259-1 0.08 O 1.70 +- 0.00 + .003 4 Plcs. [.067 - .000 ] O 1.30 [.051] 2.54 [.100] 5.08 [.200] 2.54 [.100] 5.08 [.200] Rcommended PC Board Layout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 195 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MCX Connectors Product Facts Snap-on interface facilitates assembly Conforms to CECC interface specifications for MCX 30% smaller than SMB connectors Surface mount tape and reel for high volume 50 and 75 ohm versions available Between Series Adapters For MCX Between Series Adapters, see pages 251-260. Tyco Electronics MCX microminiature snap-on connectors offer an excellent blend of size, durability and performance for emerging applications in GPS, automotive and wireless communications. MCX connectors are 30% smaller than traditional snap-on SMB connectors, offering greater packaging density and weight reduction. MCX connectors are mechanically robust with beryllium copper spring fingers rated at a minimum of 500 mating cycles. The snap-on interface facilitates assembly, eliminating the need for a threaded connection, and ensuring full engagement. The forces to engage and disengage have been optimized to ensure ease of mating as well as to prevent damage to PCB solder connections. MCX connectors are designed for broad band performance, DC-6 GHz, and can be utilized for future system upgrades without concerns for performance degradation. Tyco Electronics MCX connectors are fully mateable with standard MCX connectors and conform to the CECC interface specifications. standard configurations for commercial applications. Tape and reel packaging for MCX surface mount straight and right-angle PCB receptacles is available to facilitate high volume pick and place manufacturing. MCX surface mount connectors are designed to withstand infrared reflow, convection and vapor phase soldering and provide a .254 [.010] standoff for optimal board cleaning. MCX plug and jack PCB receptacles also offer a direct board to board solution providing a nominal 7.11 [0.28] separation. MCX connectors are available in a broad range of 196 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MCX Connectors (Continued) Specifications General CECC 22220 PARA Materials -- Finish -- -- -- Brass alloys UNS C36000 (ASTM-B16) or C38500 per QQ-B626, Beryllium copper per ASTM B-196, PTFE fluorocarbon per ASTM-D-1710 Center Contacts: Gold plated (ASTM-B488) over nickel plate (QQ-N-290) Outer Contacts: Gold plated (ASTM-B488) over nickel plate (OO-N-290) Housings: Nickel plated (QQ-N-290), tin (ASTM-B488) or Gold plated (ASTM-B488) All other metal parts shall be furnished so as to provide a connector which meets corrosion requirements of CECC 22220 PARA 4.6.10 The design shall be such that the outline and interface dimensions shown in this catalog and the requirements of CECC 22220 PARA are met -- Design -- Electrical CECC 22220 PARA Frequency Nominal Impedance Voltage Rating VSWR Insulation Resistance Insertion Loss Dielectric Withstanding Voltage Contact Resistance Center Contact Outer Contact Corona 70,000 ft. RF High Potential @ Sea Level Contact Current Mechanical (General requirements performance may vary by cable) -- -- -- 4.4.1 -- 4.4.4 -- 4.4.5 dc - 6 GHz 50 ohms 335 Volts (VRMS Maximum) @ Sea Level 1.25:1 Maximum @ 4 GHz 1.35:1 Maximum @ 6 GHz 10,000 Megohms Minimum .1dB Maximum/1000 MHz 1000 Volts (VRMS Minimum) @ Sea Level 4.4.2 4.4.3 -- -- -- 5.0 Milliohms Maximum 1.0 Milliohms Maximum 250 Volts (VRMS Minimum) @ MHz 670 Volts (VRMS Minimum) @ MHz 1.5 ADC Max CECC 22220 PARA Force to Engage Force to Disengage Contact Captivation Connector Durability Environmental 4.5.4 -- 4.5.2 4.7.1 15.5 N [3.4 lbs.] Maximum 8 - 20 N [1.8 - 4.5 lbs.] Designed to maintain MCX interface when mating 10 N [2.2 lbs.] axial 500 insertion and withdrawal cycles CECC 22220 PARA Temperature Rating Vibration Moisture Resistance Corrosion Thermal Shock -- 4.6.3 4.6.4 4.6.10 4.6.7 -65C + 165C See CECC 22220 See CECC 22220 See CECC 22220 See CECC 22220 Meets or exceeds requirements of CECC 22220. Tyco Electronics has design control and all data contained herein is subject to change without notice. Contact Tyco Electronics for specifications on other connector types. F E N D B DIA. C DIA. J DIA. H DIA. I DIA. G A DIA. K L M Plug Letter A B C D E F G Jack Minimum 0.48 [.0189] 2.00 [.0788] -- 0.00 [.000] 2.80 [.111] 4.15 [.164] 2.80 [.111] Maximum 0.53 [.0208] -- 3.8 [.148] 0.30 [.0118] 3.20 [.125] -- -- Letter H I J K L M N Minimum -- 3.42 [.135] 3.60 [.142] 2.30 [.091] 2.60 [.103] 4.00 [.158] 0.75 [.0296] Maximum 1.98 [.077] 3.48 [.137] 3.75 [.147] 2.80 [.110] 2.80 [.110] 4.12 [.162] 0.85 [.0334] 197 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MCX Connectors (Continued) Straight Cable Plug, Crimp 16.3 Ref. [.642] MCX Plug 5.00 Dia. [.197] Cable RG 178/U, 196/U Plating Nickel Nickel Gold Nickel Gold RG 174/U, 188/U, 316/U RD-316 Part No. 1060869-1 1060872-1 1060871-1 1060875-1 1060875-2 Note: For full crimp attachment consult Tyco Electronics at the numbers listed below. Right-Angle Cable Plug, Crimp 12.00 Ref. [.472] 5.00 Sq. [.197] 3.50 [.137] 6.15 [.242] 7.92 [.312] MCX Plug Cable RG 178/U, 196/U RG 188/U, 316/U RG 179/U, RG 187/U RD-316 Straight Cable Terminal, PC Board, Without Center Contact Plating Nickel Part No. 1329293-1 Nickel 1330723-1 Nickel Gold 1363301-1 1363301-2 A Ref. B 5.80 Dia. [.228] 4.00 [.157] Cable RG 174/U, 188/U, 316/U Dim. A Dim. B 11.76 .463 3.94 .155 Plating Nickel Gold Part No. 1060811-1 1060811-2 10.74 .423 2.92 .115 Gold 1060813-2 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 198 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MCX Connectors (Continued) 17.0 Ref. [.669] Bulkhead Cable Jack 1.40 [.055] 5.00 Max Panel [.197] Thickness 4.80 Dia. [.189] 4.90 Min. [.193] MCX Jack 4.50 [.177] Min. Recommended Mounting Hole Cable RG 188/U, RG 316/U Straight Cable Plug, Direct Solder Attachment Plating Nickel Part No. 1060883-1 11.3 [.445] For Semi-Rigid Cable 5.00 Dia. [.197] MCX Plug Cable RG 405/U [.085] .047 Straight Cable Jack, Direct Solder Attachment Plating Gold Gold Part No. 1060772-1 1060772-2 11.9 [.469] For Semi-Rigid Cable MCX Jack 5.00 Dia. [.197] Cable RG 405/U [.085] .047 Plating Gold Gold Part No. 1060774-1 1060774-2 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 199 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MCX Connectors (Continued) 7.00 [.276] Right-Angle Plug Receptacle, Direct Solder Attachment 5.00 [.197] For Semi-Rigid Cable 3.48 [.137] 3.10 Dia. [.122] 7.92 6.15 [.312] [.242] MCX Plug Cable RG 405/U Plating Gold Part No. 1060787-1 6.00 Sq. [.236] Vertical Plug Receptacle, PC Board 5.08 [.200] Typ. 3.94 [.155] 4.45 [.175] 0.91 Sq. [.036] 4 Plcs. 0.97 Dia. [.038] MCX Plug 5.77 [.227] Plating Nickel Gold Vertical Jack Receptacle, PC Board Part No. 1061015-1 1085221-1 A 4.45 [.175] 5.08 Typ. [.200] B 0.97 Dia. [.038] 0.91 Sq. [.036] 4 Plcs. MCX Jack Dim. A Dim. B 8.28 .326 2.92 .115 9.30 .366 3.94 .155 7.09 .279 1.73 .068 6.00 Sq. [.236] Plating Nickel Gold Nickel Gold Nickel Gold Part No. 1060985-1 1060984-1 1060989-1 1330126-1 1060996-1 1060995-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 200 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MCX Connectors (Continued) Vertical End Launch, PC Board 10.31 Ref. [.406] 0.97 Dia. Pin [.038] 4.45 [.175] 1.68 [.066] MCX Jack 3.91 [.154] 4.57 [.180] 6.35 Sq. [.250] 4.70 [.185] Plating Tin Part No. 1061007-1 Right-Angle Jack Receptacle, PC Board A B 0.97 [.038] Dia. 0.91 Sq. [.036] 4 Plcs. 9.50 [.374] 6.50 [.256] 3.00 [.118] Dim. A Dim. B 9.93 [.391] 3.94 [.155] 7.72 [.304] 1.73 [.068] 8.92 [.351] 2.92 [.115] Jack Receptacle, Bulkhead Feedthrough 6.00 [.236] Sq. 5.08 [.200] Typ. MCX Jack Plating Nickel Gold Nickel Gold Nickel Gold Part No. 1061023-1 1061022-1 1061027-1 1061026-1 1061030-1 1061029-1 8.70 [.342] 2.50 Max. [.098] Panel .580 [.023] 0.97 Dia. [.038] MCX Jack 4.90 Dia. Min. [.193] 6.50 Dia. [.256] 5.50 Across [.217] Flats Lockwasher .190-56,UNS-2A 6.35 Hex. [.250] 4.50 [.177] Min. Recommended Mounting Hole Plating Nickel Gold Part No. 1060960-1 1060959-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 201 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MCX Connectors (Continued) Vertical Jack Receptacle, Surface Mount 5.90 [.231] Ref. 4.45 [.175] 6.00 Sq. [.236] 5.08 [.200] Typ. 0.97 Dia. [.038] 0.91 Sq. [.036] 4 Plcs. MCX Jack Plating Part No. 6061002-1 6061092-11 Tin 1Tape and Reel packaging. 900 connectors per reel (carrier width 16mm, carrier pitch 12mm). Right-Angle Jack Receptacle, Surface Mount 6.00 Sq. [.236] 6.50 [.256] 5.08 [.200] Typ. 0.97 Dia. [.038] 9.50 [.374] 6.50 [.256] 3.50 [.137] Plating Tin Tin 0.91 Sq. [.036] 4 Plcs. MCX Jack Part No. 6061035-1 6061094-11 1Tape and reel packaging. 750 connectors per reel (carrier width 24mm carrier pitch 12mm). 8.89 [.350] 5.72 [.225] .510 Dia. Via. [.020] 4 Plcs. 5.08 [.200] 1.78 Dia. Pad [.070] 5 Plcs. 2.54 [.100] 11.43 5.08 .953 [.450] [.200] [.375] 2.54 [.100] 4.45 [.175] 2.22 [.088] 4 Plcs. 1 oz. Copper Area Free of Solder Mask Notes: 1. Printed circuit board material: glass epoxy FR-4 or similar; relative permittivity: 4.8, 1 oz. copper clad both sides. 2. These dimensions valid for 1.58 [.062] board thickness. 3. Decimal inch equivalents are shown in parentheses for general information only. Recommended Mounting Pattern for Microstrip Line Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 202 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MCX Connectors (Continued) Straight Cable Plug, Crimp, 75 Ohm 17.5 [.687] O 5.0 [.196] Cable RG 179/U Plating Nickel Right-Angle Cable Plug, Crimp, 75 Ohm Part No. 1362990-1 12.4 [.490] 9.9 [.390] 7.9 [.312] 6.1 [.241] Cable RG 179/U Vertical Plug, PC Board, 75 Ohm Plating Nickel Part No. 1362991-1 6.0 Sq. [.236] 6.86 [.270] 6.35 [.250] 5.08 [.200] Typ. O 0.71 [.028] 1.91 Typ. [.075] 0.91 Sq. [.036] 4 Plcs. 2.54 Typ. [.100] Plating Nickel Vertical Jack, PC Board, 75 Ohm Part No. 1361169-1 10.0 [.394] 6.0 Sq. [.236] 5.99 [.236] 3.4 [.134] 9.4 [.370] 0.7 Dia. [.026] 5.08 [.200] Sq. 0.8 [.036] Sq. 4 Plcs. 1.3 [.051] Thru 5 Plcs. 2.54 [.100] 5.08 [.200] 6.4 [.252] Plating Gold Part No. 1363106-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 203 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Compression Coax Board-to-Board Connectors Board-to-Board RF Connector Series Single connector product Surface mount technology Excellent price-toperformance ratio Product Facts Single connector design -- no mating connectors needed Available in four sizes for varied board spacing: 14mm, 10mm, 6.65mm and 4mm Large radial and axial misalignment: For positioning both boards and for gap between boards Surface Mount Device for standard pick & place compatibility Gold plated phosphor bronze and brass contacts, stainless steel springs Mating directly on target board Easy connection without risk of breaking soldering or connector when mating or unmating Low applied material and assembly costs Applications Modular parallel board-toboard blindmate applications Base Station / Sub Station systems PDA / PCS / Cellular Handset applications Wireless Communications systems (GSM, PCS, WCDMA, UMTS) Specifications Characteristic Impedance -- 50 Ohms Frequency Range -- Up to 6 GHz Return Loss -- -20dB min.; up to 2.2 GHz (all misalignments) Shielding Effectiveness -- -60 dB min.; up to 2.2 GHz Working Voltage -- 125 VAC, 50 Hz (at sea level) Dielectric Withstanding Voltage -- 500 VAC, 50 Hz (at sea level) Insulation Resistance -- 100 Megohms Operating Temperature -- -40 to +125C Mating Force -- 10 N Durability -- 25 cycles Angle Between Boards -- 2 max. Axial Misalignment -- 1.0mm from nominal boards stacking height; 0.4mm, 0.3mm for shortest models (Part Numbers 619135 and 1658260) Radial Misalignment -- 0.8mm from center line in any direction Vibration -- 20 g between 58-500 Hz (Const. amplitude of 1.5 mm between 10-58 Hz) 2 Max. Target Board H Base Board Part Number 619127-1 619134-1 619135-1 1658260-1 Height "H" 14 1.0mm 10 1.0mm 6.65 0.4mm 4 0.3mm Related Product Data Internet -- http://tycoelectronics.com/products/rfcoax Product Specification/Design Objectives -- 108-71060 Test Report -- 501-90021 Sample Kit -- 1-1773441-3 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 204 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors STAX Coax Connectors Product Facts Low cost, low height and high performance Low insertion loss 0 to -0.5 dB from 0 to 6 GHz VSWR < 1.07 from 0 to 6 GHz Wide working range of deflection Long term reliability and durability Surface mount/pick and place Low board separation 2.5 mm Technology can support board separations 1.5 mm Easily modified free height No tooling required for height modifications Modified prototype samples within 2 weeks Tyco Electronics' STAX coax RF connector is the first surface mount RF board-to-board connector on the market that uses elastomeric connector technology to provide an economical means to achieve low board separation while maintaining excellent RF signal integrity between PCBs. The connector uses laminated sections of conductive and nonconductive silicone that are tuned to provide a 50 ohm impedance line between mated substrates. The single piece construction of the STAX coax RF connector eliminates some of the signal anomalies normally associated with mated pairs of metal contact coax connectors. The dimensional relationship of the inner and outer conductor is consistently maintained throughout the connector. With its metal holder, the STAX coax RF connector can be surface mount soldered to the PCB. An additional metal SMT holder aligns the connector to the mating PCB. If adequate PCB alignment is already maintained by other means, the STAX RF connector may not need the additional mating receptacle and can become a blindmating connector. This has an additional advantage in space constrained mobile applications where very fine-pitch board-to-board connectors are also used. Electrical Characteristics Contact Resistance -- < 50 m Insulation Resistance -- 1012 min. Dielectric Withstanding Voltage (without breakdown or arcing) -- 1000 Volt Related Product Data Physical Characteristics Internet -- www.elastomerictech.com www.tycoelectronics.com Board Separation -- 2.5 mm 0.2 (std. part) PCB Board Area -- 4.0 mm dia. Typical Clamping Force -- See chart Elastomeric Technologies Applications Engineering -- Phone: 1-800-989-STAX ext. 4453 Fax: 1-215-784-4522 E-mail: ETIapplicationseng@tycoelectronics.com Environmental Characteristics Operating Temperature -- -40C to +125C Moisture -- 0 to 100% RH Technical Documents -- Qualification Test Report -- T R 368 RF Performance Report -- 00266 205 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors STAX Coax Connectors (Continued) Description Part Number STAX SMT Coax Connector Assembly: 619229-1 Consists of STAX Coax elastomer in round SMT holder Mating SMT Target Holder: 619238-2 Controls alignment between PCBs STAX Coax RF Elastomer only: 1442004-1 Used with customer furnished holder Part Number 619229-1 SMT STAX Coaxial Connector Assembly 2.50 0.20 [.098 .008] Mated Condition 0.55 [.022] Center Conductor Dielectric Material Board 4.00 [.157] Outer Conductor Solder Ring 3.20 Unmated [.126] 2.20 [.087] Solder Mask 1.60 [.063] 2.40 [.094] Conductive Elastomer Outer Conductor 0.40 [.016] 3.20 [.126] 3.50 [.138] 4.30 [.169] PCB Pattern 2.40 [.094] 0.40 [.016] Conductive Elastomer Inner Conductor Non-conductive Elastomer 0.55 [.022] Part Number 619238-2 SMT Mating Target Holder Center Conductor Dielectric Material Board Outer Conductor 5.00 [.197] Solder Ring Solder Mask 1.50 [.059] 1.60 [.063] 3.60 [.142] 4.20 [.165] 5.00 [.197] PCB Pattern For Mating Target Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 206 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMT/QuickGrip system. The SMT/QuickGrip design provides optimal cable retention for applications where shock, vibration, and/or cable flexure may be encountered. This unique RF design accepts both flexible and semi-rigid micro-coaxial cables while delivering exceptional RF performance up to 3GHz. Product Facts Solderless Cable Termination 3.0 [.118] Mated Height Excellent Cable Retention Usable With Flexible and Semi-Rigid Micro-Coaxial Cables Tape and Reel Packaging Connectors Tyco Electronics revolutionary SMT/QuickGrip product line is designed to meet the growing demand for a reliable, low cost system for direct termination of coax to a printed circuit board (PCB). SMT/QuickGrip technology eliminates the requirement to connectorize the coaxial cable, reducing assembly times and, therefore, cost. The SMT/QuickGrip surface mount device occupies less PCB area than conventional through hole coaxial connectors. An innovative microstrip mounting pattern and cable receptacle design ensures excellent grounding and PCB retention. The SMT/QuickGrip cable termination system stands a mere 3.0 [.118] off the board when mated, allowing for closer pitch/ spacing when designing a 6.4 [.250] Ref. These features make this system extremely versatile for design engineers and offer a reliable, cost effective alternative to direct soldering of cable to the PCB. The cable is inserted into the device by means of a simple self-aligning hand tool, eliminating the requirement for skilled personnel. This system removes the possibility of damaged PCBs and cables which are common quality issues associated with direct solder, while providing superior RF performance. The SMT/QuickGrip accommodates multiple cable insertions allowing easy replacement of cables for repairs. This receptacle is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for pick and place board assembly. Prestripped cables and inter- series cable pigtails are available as turnkey solutions for your application needs (i.e.: for use in multi-board applications, for connecting antennas to the PCB, or point to point transmission on the same PCB). The SMT/QuickGrip cable termination system is ideal for wireless surface mount applications in handsets, pagers and personal digital assistants (PDA). The SMT/QuickGrip mechanical and electrical performance, coupled with its ease of use, ensure it to be a high quality, reliable solution for current and future interconnect needs. Tyco Electronics is an ISO9001 certified manufacturer and maintains an SPC controlled manufacturing environment. Please call your local Sales or Distribution office for additional information and qualification samples today. 3.2 Ref. [.120] 1.3 Cable Jacket Cable Braid Cable Conductor 1.26 VSWR Cable Dielectric 3.0 Ref. [.120] 1.22 1.18 1.14 PWB 2.1 Ref. [.083] 1.1 0.3 3.0 Ref. [.120] 0.6 0.9 1.2 1.8 2.1 2.4 2.7 3 FREQUENCY (GHz) Typical VSWR using SMT/QuickGrip with Omni-Flex 200 Cable PWB Omni-Flex 200 cable is a Tyco Electronics specified cable. 207 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMT/QuickGrip Connectors (Continued) Specifications General Materials Housing: Contacts: Finishes Contacts: Polyphenylene Sulfide (PPS) Copper Alloy Gold Plate over Nickel Electrical Frequency Range: Impedance: Insertion Loss: DWV: VSWR: DC - 3GHz Usable with 50 & 75 Ohm systems .08 GHz 750 VRMs 1.3:1@ 3GHz (Omni-Flex 200 and .047 [.002] Semi-Rigid) 1.4:1 @ 3GHz (.034 [.001] Semi-Rigid) Mechanical Connector Durability: Tape and Reel Packaging: Force to Disengage by Cam-Out (grams): 5 mating cycles min. (receptacle only) 16 [.629] per EIA-481 Omni-Flex 200 Cable .034 [.001] Semi-Rigid .047 [.002] Semi-Rigid - 543 typical 852 typical 1066 typical Environmental Temperature Rating: Resistance to Solder Heat: -40C(-40F) to 125C(257F) when mated with Omni-Flex 200 Cable Infrared, convection, and vapor phase solderable (receptacle only). Maximum reflow time/temperature not to exceed 260C for 3 minutes. Cable Information Omni-Flex 200 Cable FEP Flexible Cable (200C) Fluorinated Ethylene Propylene Silver plated copper wire, 44 AWG, 90% min. coverage PTFE (Polytetrafluoroethylene) Silver Plated Copper Clad Steel, 30 AWG 6.35 [.250] 1.3dB/m, 0.4 dB/ft. @ 500 MHz 2.0dB/m, 0.5 dB/ft. @ 1 GHz 3.0dB/m, 0.9 dB/ft. @ 2 GHz .26 Ohms per foot average Materials: Jacket: Shield: Dielectric: Center Conductor: Minimum Bend Radius: Insertion Loss (PVC and FEP cable only): Center Conductor Resistance: Strip Dimensions Tyco Electronics Omni-Flex 200 Cable Part Number 1407578-1 Semi-Rigid Cable (.034 and .047) O 1.30 Ref. [.051] O 0.87 O 1.19 or Ref. [.034] [.047] Leave Jacket Slug On To Protect Braid Omni-Flex 200 cable is a Tyco Electronics specified cable. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 208 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMT/QuickGrip PC Board Mount Receptacle Connectors Pick and Place Feature 1.3 [.050] Center Contact 3.2 [.125] Ground Contact (Continued) 3.0 [.120] 0.5 [.020] 6.4 [.250] Center Contact Terminal 1.3 [.050] 3.4 [.135] 7.8 [.305] 4.3 [.169] 2 Plcs. 0.5 [.020] 0.6 [.025] 0.6 2 Plcs. [.024] O 0.5 Via. 5 Plcs. [.020] 2.4 [.096] 9.0 [.345] 2.4 [.095] 3.4 [.133] 1.3 1.5 [.058] [.050] Circuit Line Ground Pad 2.5 [.100] 1.3 [.050] 1.0 oz. Copper [.0014] 3.8 [.150] Area Free of Solder Mask Recommended Mounting Pattern for Microstrip Line Description Bulk Packaged 100/bag 700 Piece Reel 2000 Piece Reel Part No. 1085456-1 1086008-1 1086009-1 1. Printed wiring board material: glass epoxy FR-4 or similar, relative permittivity: 4.8, 1 oz. copper clad both sides. 2. These dimensions valid for 1.6 [.062] board thickness. Cable Insertion Tool Part No. 1088313-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 209 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMT/QuickGrip Connectors (Continued) Inter-Series Cable Assemblies SMA Straight Plug Length A Cable 19.2 Ref. [.755] Assembly Length (A) 100 [4] 200 [8] 305 [12] Omni-Flex 200 Part No. 1329174-1 1329174-2 1310432-1 Note: 1. Cable length tolerances: Length `A' mm [In], Tolerance mm [In], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], Over 500 [19.69], 10 [ .39] SMA Bulkhead Jack Length A 21.3 Ref. [.837] 6.40 Min. [.250] 6.00 [.235] Min. Recommended Mounting Hole Cable Omni-Flex 200 Assembly Length (A) 100 [4] 200 [8] 305 [12] Part No. 1329175-1 1329175-2 1329175-3 Note: 1. Cable length tolerances: Length `A' mm [In], Tolerance mm [In], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], Over 500 [19.69], 10 [ .39] Omni-Flex 200 cable is a Tyco Electronics specified cable. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 210 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SMT/QuickGrip Connectors (Continued) Inter-Series Cable Assemblies (Continued) SMB Bulkhead Jack Length A Cable 17.1 Ref. [.675] Omni-Flex 200 4.90 Min. [.192] Assembly Length (A) 100 [4] 200 [8] 305 [12] Part No. 1408050-4 1408050-5 1408050-6 Note: 1. Cable length tolerances: Length `A' mm [In], Tolerance mm [In], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], Over 500 [19.69], 10 [ .39] 4.40 Min. [.172] Recommended Mounting Hole SMB Right-Angle Plug Length A 12.7 Ref. [.500] Cable Omni-Flex 200 14.0 [.550] Assembly Length (A) 100 [4] 200 [8] 305 [12] Part No. 1255378-4 1255378-5 1255378-6 Note: 1. Cable length tolerances: Length `A' mm [In], Tolerance mm [In], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], Over 500 [19.69], 10 [ .39] 10.8 [.427] MCX Bulkhead Jack Length A 16.8 Ref. [.662] Cable 4.80 Min. [.189] O 4.90 Min. [.192] Omni-Flex 200 Part No. 1408051-4 1408051-5 1408051-6 Note: 1. Cable length tolerances: Length `A' mm [In], Tolerance mm [In], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], Over 500 [19.69], 10 [ .39] 4.50 Min. [.177] 11.4 [.447] Ref. Assembly Length (A) 100 [4] 200 [8] 305 [12] Recommended Mounting Hole MCX Right-Angle Plug Length A Cable 10.8 Ref. [.425] Omni-Flex 200 7.90 [.312] Part No. 1330401-4 1330401-5 1330401-6 Note: 1. Cable length tolerances: Length `A' mm [In], Tolerance mm [In], 50 to 100 [3.94], 3 [ .12], 101 to 500 [3.98 to 19.69], 5 [ .20], Over 500 [19.69], 10 [ .39] 6.10 [.241] Omni-Flex 200 cable is a Tyco Electronics specified cable. Assembly Length (A) 100 [4] 200 [8] 305 [12] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 211 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System Microminiature Surface Mount RF Connectors Product Facts 3.0 [.118] mated height Excellent interface retention Flexible micro-coax cable 360 degree mated rotation Tape and Reel packaging available The Tyco Electronics SSMT surface mount Interconnect System is designed to provide superior electrical and mechanical performance for wireless communication applications. The SSMT system occupies less printed circuit board (PCB) real estate than conventional through hole coaxial connectors. An innovative microstrip mounting pattern and plug receptacle design ensure reliable grounding and PCB retention characteristics. The SSMT Interconnect System allows closer pitch/spacing, standing 3.0 [.118] (fully mated height) off the board. The mated SSMT interface allows 360 degrees of rotation providing maximum PCB design flexibility. It has been designed to provide optimal retention for applications where shock, vibration or cable flexure may be encountered. Force to disengage by cable load (cam-out) exceeds 300 grams. The SSMT system is designed to provide the performance of much larger industry standard connectors. The SSMT Interconnect System consistently achieves broad band electrical performance through 6 GHz with a maximum VSWR of 1.20:1 at 2 GHz. This broad band performance establishes a reliable interface that can be utilized for future system upgrades without concern for performance degradation. The SSMT utilizes a common plug receptacle, part number 1251802-1, which is designed for high volume assembly using surface mount technology and is available in tape and reel packaging for automatic pick and place board assembly. The mating cable jack is available terminated to a highly flexible microcoax cable as either a pigtail, jumper or standard interseries connector assembly to meet your needs. The SSMT Interconnect System can be manually mated, facilitating high volume assembly and eliminating the need for special engagement tooling. The SSMT interface design aligns the center contacts prior to full mating to ensure a robust mechanical engagement. Interface durability is rated at 100 mating cycles. 212 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Specifications General Materials SMT Plug Housing: Polyphenylene Sulfide (PPS) Contacts: Copper Alloy Outer Contact: Beryllium Copper Inner Contact: Beryllium Copper Dielectric: Polypropylene, GF Plug and cable jack - Contacts: Gold plate over nickel plate SSMT Cable Jack Finish Electrical Frequency Nominal Impedance Voltage Rating VSWR (Mated Pair) Insulation Resistance Dielectric Withstanding Voltage Contact Resistance (Connectors Only) Center Contact Outer Contact Insertion Loss (Connectors Only) dc - 6 GHz 50 Ohms 250 Volts (VRMS Maximum) @ Sea Level 1.20:1 Maximum @ 2 GHz 1.40:1 Maximum @ 6 GHz 5000 Megohms Minimum 500 Volts (VRMS Minimum) @ Sea Level 15 milliohms Maximum 10 milliohms Maximum .15dB Max. @ 6 GHz Mechanical Connector Durability Tape/Reel Packaging (Plug) Force to Engage Force to Disengage Force to Disengage by Cable Load (camout) 100 mating cycles 12mm per EIA-481 5.5 lbs. Max. (3.5 lbs. typ.) (2.0 lbs. typ.) 4.0 lbs. Max. (2.0 lbs. typ.) 300 Grams Min. (800 Grams typ. initial mate) Environmental Temperature Rating (Mated Pair) Resistance to Solder Heat -40C (-40F) to +125C (257F) Infrared, convection and vapor phase solderable (plug only). Maximum reflow time/temperature not to exceed 260C for 3 minutes. Cable Specifications Materials Jacket: Shield: Dielectric: Center Conductor: Minimum Bend Radius Insertion Loss (Cable Only) Center Conductor Resistance FEP (polytetrafluoroethylene) Silver plated copper wire, 44 AWG, 90% min. coverage PTFE ( polytetrafluoroethylene) Silver plated copper clad steel, 30 AWG 6.35mm (.250 inch) 0.5 dB/ft., 2.0 dB/m @ 1 GHz 0.9 dB/ft., 3.0 dB/m @ 2 GHz .25 Ohms per foot average. 819 milliohm/meter Nom.; 250 milliohm/Ft. Nom. 1.3 Dia. Ref. [.052] Outer Jacket 1.0 Dia. Ref. [.040] Shield (Braid) 0.8 Dia. Ref. [.030] Dielectric 0.3 Dia. Ref. [.010] Center Conductor 213 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Straight SMT PCB Mount Plug Receptacle Ground Terminal (3 Plcs.) 4.5 [.177] Center Contact (Pin) 2.1 [.081] 4.0 [.157] 2.1 [.049] 5.0 [.197] 4.5 [.177] 1.0 [.039] 4 Plcs. Center Contact Terminal Outer Contact 1.2 [.047] 0.5 VIA Holes [.020] 3 Plcs. 0.5 [.020] 4 Plcs. 0.6 [.025] Packaging Bulk 178 Dia. Taping 7.0 330 Dia. Taping 13.3 5.3 [.207] 0.4 [.015] 0.6 [.024] 1.2 [.047] 3.0 [.118] Quantity Multiple of 100 Part No. 1251802-1 800 pcs/reel 1083946-1 3000 pcs/reel 1055689-1 Center Contact Terminal 2.9 [.113] 1.6 (See Note 2) [.064] (See Note 2) 1.2 [.047] 7.0 [.274] 9.0 [.354] Notes: 3.0 6.0 [.118] [.236] 0.5 [.019] 3.3 [.128] 1.2 [.047] 3.3 [.128] 1 oz. Copper [.0014] Area Free of Solder Mask 1. Printed wiring board material: glass epoxy. FR-4 or similar, relative permittivity: 4.8, 1 oz. copper clad both sides. 2. These dimensions valid for 1.6 [.062] board thickness. Recommended Mounting Pattern for Microstrip Line Right-Angle Jack to Jack Cable Assembly Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064524-1 1064530-1 1064533-1 3.4 Ref. [.132] 2.1 Ref. [.081] 5.3 Ref. [.208] SSMT Jack Length A Centerline to Centerline 1.3 Ref. [.052] Cable 2.5 Dia. [.100] Ref. Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Length A Tolerances. Length A Tolerance 50 To 100 [3.94] 3 [ .12] 101 To 500 [3.98 to 19.69] 5 [ .20] Over 500 [19.69] 10 [ .39] 2. Connector centerlines align 30 as shown for lengths of 165 [6.5] or less. Cable assemblies over 165 [6.5] have randomly aligned connectors. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 214 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Right-Angle Jack to Jack Cable Assembly (180 Offset) Assembly Length (A) 100 [4.0] Part No. 1082845-1 Length A Centerline to Centerline 2.1 Ref. [.081] 5.3 Ref. [.208] SSMT Jack O 2.5 [.100] 1.3 Ref. Cable [.052] Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Cable length tolerance: Length A Tolerances. Length A Tolerance 50 To 100 [3.94] 3 [ .12] 101 To 500 [3.98 to 19.69] 5 [ .20] Over 500 [19.69] 10 [ .39] 2. To avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. Right-Angle Jack Cable Pigtail Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] 510 [20.0] Part No. 1064535-1 1064538-1 1064540-1 1064542-1 3.4 Ref. [.132] 2.1 Ref. [.081] 5.3 Ref. [.208] Length A Centerline to Cable End SSMT Jack 2.5 Dia. [.100] Ref. 1.3 Ref. Cable [.052] Notes: 1. Consult Tyco Electronics for non-standard cable lengths. Cable length tolerance: Length A Tolerances. Length A Tolerance 50 To 100 [3.94] 3 [ .12] 101 To 500 [3.98 to 19.69] 5 [ .20] Over 500 [19.69] 10 [ .39] 2. To avoid damaging the cable, minimize time at temperature while soldering and/or applying heat to unterminated end of cable. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 215 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Inter-Series Cable Assemblies Notes: 1. Consult Tyco Electronics for non-standard cable lengths: Length A Tolerances. Length A Tolerance 50 To 100 (3.94) 3 ( .12) 101 To 500 (3.98 to 19.69) 5 ( .20) Over 500 (19.69) 10 ( .39) 2. Connectors are randomly aligned unless otherwise noted. SMA Straight Plug 3.4 Ref. [.132] Length A Reference Plane to Centerline 19.2 Ref. 1.3 Dia. Ref. [.757] [.052] Cable Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] 2.1 Ref. [.081] SSMT Right Angle Jack Part No. 1064543-1 1064552-1 1064560-1 Note: 1064552-1 recommended for customer system verification. 2.5 Dia. Ref. [.100] SMA Bulkhead Jack Length A Reference Plane to Centerline 1.3 21.3 Ref. [.052] [.839] Dia. Ref. Cable 7.9 Hex. [.312] 3.4 Ref. [.132] 2.1 Ref. [.081] 2.5 Dia. Ref. [.100] SSMT Right 3.2 Max. Panel Angle Jack [.125] Thickness 5.4 Dia. [.250] Min. Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064544-1 1064553-1 1064561-1 Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064546-1 1064555-1 1064563-1 6.0 [.235] Min. Recommended Mounting Hole SMB Bulkhead Jack 7.4 [.290] 6.4 Hex. [.250] Length A Reference Plane to Centerline 17.1 Ref. 1.3 [.675] [.052] Dia. Ref. Cable 3.4 Ref. [.132] 2.1 .1 Ref.Ref. [.081] 81] 4.9 Dia. [.192] Min. 4.4 4.4 2.5 [.172] [.172] [.100] Min.Min. Dia. Ref. SSMT Right t Re Recommended 2.4 Max. Panel Angle Jack k Mo Mounting Hole [.093] Thickness 7.9 Hex. [.312] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 216 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SSMT Surface Mount Interconnect System (Continued) Inter-Series Cable Assemblies (Continued) MCX Bulkhead Jack Length A Reference Plane to Centerline 1.3 16.8 Ref. [.052] [.662] Dia. Ref. Cable 4.8 Dia. [.189] 6.4 [.250] Max. Panel Thickness 11.4 [.447] 3.4 Ref. [.132] 4.9 Dia. [.192] Min. 2.1 1 Ref. Ref. [.081]1] Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064549-1 1064558-1 1064566-1 Assembly Length (A) 100 [4.0] 200 [8.0] 305 [12.0] Part No. 1064550-1 1064559-1 1064567-1 2.5 Dia. Ref. 4.5 Min. [.100] [.177] SSMT Right Recom Recommended Angle Jack Mounti Mounting Hole 6.4 [.250] Hex. MCX Right-Angle Plug Length A Centerline to Centerline 3.4 Ref. [.132] 1.3 [.052] Dia. Ref. Cable 2.1 Ref. [.081] 12.7 [.500] Ref. 6.1 [.241] SSMT Right Angle Jack 7.9 [.312] 2.5 Dia. Ref. [.100] 101.6 Ref. [4.00] SSMT Disengagement Tool Part No. 1221286-1 SLIDE HORIZONTAL TO ENGAGE TOOL LIFT VERTICAL TO DISENGAGE CONNECTOR PRESS VERTICAL TO ENGAGE CONNECTOR OPTIONAL Use of Engagement/Disengagement Tool Note: The SSMT disengagement tool can be utilized as an optional engagement tool versus manual hand installation. SSMT to SMA Between Series Adapters SSMT Plug to SMA Jack Adapter SSMT Plug to SMA Plug Adapter 13.7 Ref. [.538] 5.5 Across Flats [.218] SMA Jack SSMT Plug SSMT Plug 16.2 Ref. [.639] SMA Plug SSMT Jack 12.9 Ref. [.508] 10.5 Ref. [.413] Part No. 1055696-1 5.5 Across Flats [.218] SSMT Jack SMA Jack SMA Plug SSMT Jack to SMA Plug SSMT Jack to SMA Jack Adapter Part No. 1055695-1 Part No. 1055694-1 Part No. 1055697-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 217 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MMCX Microminiature Snap-On Connector Series Product Facts Material and Finish Snap-on interface facilitates assembly 35% smaller than MCX Series Designed for space saving applications up to 6 GHz Shells -- Brass Bodies -- Brass , plated gold Center Contacts -- (Male) -- Brass, plated gold (Female) -- Beryllium Copper, plated gold Dielectrics -- PTFE Conforms to CECC Specifications Electrical Characteristics in accordance with CECC 22000 Surface mount tape and reel for high volume Frequency -- dc - 6 GHz Nominal Impedance -- 50 ohms Voltage Rating -- 170 Volts (VRMS Max.) @ Sea Level VSWR -- 1.25 : 1 Max. @ 6 GHz Insulation Resistance -- 1,000 Megohms Min. Dielectric Withstanding Voltage -- 500 Volts (VRMS Max.) @ Sea Level RF Leakage -- -60 dB Min. @ 2.5 GHz Contact Resistance -- Center Contact -- 5 milliohms max. Outer Contact -- 1 milliohm max. Tyco Electronics' microminiature snap-on connectors offer an excellent blend of size, durability and performance for emerging applications in GPS, PCS, automotive and wireless communications. An extension of the popular MCX series, MMCX connectors are 35% smaller, offering even greater packaging density and weight reduction. MMCX connectors are rated to 500 mating cycles. The snap-on interface facilitates assembly, eliminating the need for a threaded connection, and ensuring full engagement. The forces to engage and disengage have been optimized to ensure ease of mating as well as to prevent damage to PCB solder connections. MMCX connectors are designed for broadband performance, DC-6 GHz, and can be utilized for future system upgrades without concerns for performance degradation. The non-slotted outer contact provides for minimal RF leakage. MMCX surface mount connectors are designed to withstand infrared reflow, convection and vapor phase soldering. Tyco Electronics MMCX connectors are fully mateable with competitive MMCX product and conforms to the CECC interface specifications. They are available in a broad range of standard configurations, including PCB and panel mount, flexible and semi-rigid cable. Tape and reel packaging is available on surface mount product to facilitate high volume manufacturing. Other options can be reviewed as well, including additional cable sizes, and adapters. The MMCX connector series is a cost effective solution for the challenging demands of today's commercial marketplace. It offers one of the smallest conventional crimp terminations without special tooling. Call your local sales office or authorized distributor for additional information or samples of the MMCX connector series. 16.62 Ref. [.655] Mechanical Characteristics in accordance with CECC 22000 Connector Durability -- 500 mating cycles Force to Engage -- 18 Newtons Max. Force to Disengage -- 6 Newtons Max. Center Contact Retention -- 10 Newtons Min. Cable Retention -- Axial -- 45 Newtons Min. Rotational -- 0.05 N-m Min. Environmental Characteristics in accordance with CECC 22000, Equivalent Test Conditions Temperature Rating -- -55 to +155C Vibration -- MIL-STD-202, Method 204, Condition B Shock -- MIL-STD-202, Method 213, Condition A Moisture Resistance -- MIL-STD-202, Method 106 Thermal Shock -- MIL-STD-202, Method 107, Condition B Note: Performance specifications are typical, but may not apply to all connector types. 8.80 Ref. [.347] Related Product Data Product Specification -- 108-2084 Sample Kit -- 1654779 MMCX SMB 218 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MMCX Microminiature Snap-On Connector Series (Continued) MMCX Interface Dimensions Plug Jack 3.5 [0.14] 2.7 Min. [0.11] 2.6 Min. [0.10] 0.25 Max. [0.01] 1.05 [0.04] 0.7 Ref. [0.03] 2.4 1.6 Max. [0.06] [0.09] 1.45 [0.06] Min. 2.41 Min. [0.09] 0.4 [0.02] Reference Plane Reference Plane Semi-Rigid Cable - Direct Solder Attachment Straight Cable Plug Right-Angle Cable Plug O 3.5 [0.14] Cable RG 405 Part No. 1408313-1 11.5 [0.45] 4.0 [0.16] 7.0 [0.28] 3.5 [0.14] 5.3 [0.21] Cable RG 405 Part No. 1408314-1 Cable RG 178, 196 RG 174, 188, 316 RD 316 Part No. 1408149-1 1408149-2 1408149-3 6.5 [0.25] Flexible Cable - Crimp Attachment Right-Angle Cable Plug Straight Cable Plugs O 3.5 [0.14] Cable RG 178, 196 Part No. 1408148-1 4.0 [0.16] Captured Center Contact 11.5 [0.45] 7.0 [0.28] 3.5 [0.14] 5.3 [0.21] Captured Center Contact 11.9 [0.47] O 3.8 [0.15] Cable RG 174, 188, 316 RD 316 15.9 [0.63] Part No. 1408312-1 1408312-2 Captured Center Contact Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 219 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MMCX Microminiature Snap-On Connector Series (Continued) Printed Circuit Board Straight Jack Receptacle 3.5 [0.14] Reference Plane 2.6 [0.10] 1.27 Typ. [.050] O 0.82 [.032] 2.54 Typ. [.100] 4.5 [0.18] O 0.7 [0.03] Right-Angle Jack Receptacle 3.5 [0.14] 7.5 [0.30] Recommended Mounting Holes Reference Plane 1.27 Typ. [.050] O 0.82 [.032] 6.5 [.256] 4.75 [.187] 2.6 [.102] 3.8 [.150] Part No. 1408150-1 2.54 Typ. [.100] Part No. 1408151-1 Recommended Mounting Holes 6.8 [.268] 3.5 [.138] Straight Plug Receptacle O 0.7 [.028] 2.80 [.110] 4.50 [.177] 3.50 [.138] 1.27 Typ. [.050] O 0.82 [.032] 7.50 [.296] O 0.70 [.028] 2.54 Typ. [.100] Part No. 1408496-1 Recommended Mounting Holes Surface Mount Straight Jack Receptacle 5.0 [0.20] 2.6 [0.10] 0.8 [.031] 1.6 [.063] 5.0 [0.20] PC Board 2.1 [.083] 1.4 [.055] Part No. 1393757-6 1.4 [.055] 5.6 [0.22] Right-Angle Jack Receptacle 5.0 [0.20] Ground Pad Typ. 2.6 [0.10] 5.0 [0.20] Signal Pad Recommended Mounting Pattern Part No. 1393757-7 PC Board Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 220 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors MMCX Microminiature Snap-On Connector Series (Continued) Edge Mount Straight Jack Receptacle 2.8 [.110] Part No. 1408152-1 3.5 [.138] 3.4 [.134] 3.50 [.138] 7.45 [.293] Ground Pad Typ. Signal Pad 4.50 [.177] 7.40 [.291] 4.60 [.181] 1.10 1.95 [.043] [.077] 4.50 [.177] O 0.70 [.027] 2.20 [.087] 7.50 [.296] 2.80 [.110] Solder Pad Configuration Only Straight Plug Receptacle 4.50 [.177] 3.50 [.138] 1.40 [.055] 3.40 [.134] Part No. 1408120-1 2.70 [.106] 3.50 [.138] Ground Pad Typ. Signal Pad 7.45 [.293] 4.50 [.177] 7.40 [.291] O 0.70 [.027] 4.60 [.181] 1.10 1.95 [.043] [.077] 4.50 [.177] 2.20 [.087] 7.50 [.296] 2.80 [.110] Solder Pad Configuration Only Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 221 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors UMCC -- Ultraminiature Coax Connector and Cable Assembly Series Product Facts Ultra low profile (2.0 mm or 2.5 mm maximum mated height) Easy snap on/off mating Small footprint on PCB (3 mm x 3 mm) Excellent performance to 6 GHz Surface mount and reflow solderable Available on 0.80 mm and 1.37 mm dia. single shield, and 1.32 mm dia. double shield cable Style A receptacles mate with HIROSE U.FL/U.FL(v) Series connectors Style B receptacles mate with MURATA GSC Series connectors Description Electrical Characteristics Extremely low profile Surface mount technology 360 mated rotation Excellent price-toperformance ratio Applications Wireless LAN, Mini PCI Mobile Antenna/GPS/ Radio Systems PDA/PCS/Cellular Handset applications Wireless Communications systems (LAN, GSM, PCS, WCDMA, UMTS) Remote measuring equipment Characteristic Impedance -- 50 Ohms Frequency Range -- DC to 6 GHz VSWR (mated pair) -- 1.30 max. DC to 3 GHz 1.40 max. 3 to 6 GHz (cable dependent) Insertion Loss (connectors only) -- 0.24 dB max. DC to 6 GHz Rated Voltage -- 60 VAC (rms) -- standard receptacle (Styles A, B) Dielectric Withstanding Voltage -- 200 VAC, 50 Hz for 1 min. @ sea level Insulation Resistance -- 500 Megohms min. Contact Resistance (connectors only) -- 20 milliohms max. (Center) 10 milliohms max. (Outer, Plug) 10 milliohms max. (Outer, Receptacle) Mechanical and Environmental Characteristics Durability -- 30 cycles -- standard receptacle (Styles A, B) Disengagement Force -- 2N min. perpendicular 4N min. orthogonal Center Contact Retention Force -- 0.15N min. Tape/Reel Packaging (receptacle) -- 12 mm carrier per EIA-481 Operating Temperature -- -40C to +90C Material and Finish Shell -- Phosphor bronze, plated gold or silver Male Center Contact -- Brass or phosphor bronze, plated gold Female Center Contact -- Brass or phosphor bronze, plated gold Insulator (Plug) -- PBT (15% G.F.), black, UL94V-0 Insulator (Receptacle) -- LCP, beige or black, UL94V-0 Related Product Data Product Specification -- 108-2231 Sample Kit -- 1-1773441-6 HIROSE is a trademark of Hirose Electric. MURATA is a trademark of Murata Electronics, Inc. 222 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors UMCC -- Ultraminiature Coax Connector and Cable Assembly Series (Continued) Cable Information Material and Finish Center Conductor -- 0.8 mm Dia. -- Silver plated copper 1.32 mm Dia. -- Silver plated copper 1.37 mm Dia. -- Silver plated copper Center Conductor Size -- 0.8 mm Dia. -- Stranded 7/0.05 mm 1.32 mm Dia. -- Stranded 7/0.08 mm 1.37 mm Dia. -- Stranded 7/0.10 mm Dielectric -- 0.8 mm Dia. -- FEP or PFA 1.32 mm Dia. -- FEP 1.37 mm Dia. -- FEP Dielectric Size -- 0.8 mm Dia. -- 0.4 mm OD 1.32 mm Dia. -- 0.66 mm OD 1.37 mm Dia. -- 0.83 mm OD Shield -- 0.8 mm Dia. -- Silver plated copper braid 1.32 mm Dia. -- Double SPL braid 1.37 mm Dia. -- Silver plated copper braid Electrical Characteristics Shield Coverage -- 0.8 mm Dia. -- > 90% 1.32 mm Dia. -- > 90% (each braid layer) 1.37 mm Dia. -- > 90% Jacket -- 0.8 mm Dia. -- FEP or PFA 1.32 mm Dia. -- FEP 1.37 mm Dia. -- FEP Jacket Size -- 0.8 mm Dia. -- 0.80 mm OD 1.32 mm Dia. -- 1.32 mm OD 1.37 mm Dia. -- 1.37 mm OD Impedance (Ohms) -- 0.8 mm Dia. -- 50 2 1.32 mm Dia. -- 50 2 1.37 mm Dia. -- 50 2 Velocity of Propagation -- 0.8 mm Dia. -- 70% 1.32 mm Dia. -- 70% 1.37 mm Dia. -- 70% CC Resistance (Ohms/KM) -- 0.8 mm Dia. -- 1450 1.32 mm Dia. -- 560 1.37 mm Dia. -- 354 Voltage Rating -- 0.8 mm Dia. -- 60 VAC 1.32 mm Dia. -- 60 VAC 1.37 mm Dia. -- 60 VAC Attenuation -- See chart Mechanical Characteristics Minimum Bend Radius -- 0.8 mm Dia. -- 5 mm single bend, 30 mm continuous flexing 1.32 mm Dia. -- 5 mm single bend, 30 mm continuous flexing 1.37 mm Dia. -- 5 mm single bend, 30 mm continuous flexing Jacket Dielectric Center Conductor Braided Shield UMCC Cable Attenuation Frequency (GHz) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 -1 -2 Attenuation (dB/m) -3 1.37 mm OD -4 -5 0.80 mm OD 1.32 mm OD -6 -7 -8 -9 -10 223 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors UMCC -- Ultraminiature Coax Connector and Cable Assembly Series (Continued) PCB Receptacles -- Style A H Max. Receptacle Printed Circuit Board Style Mates with UMCC Connector Type A II / III A II / III UMCC PCB Receptacle 2.6 [.102] Mated Height (H) 2.00-2.50 .079-.098 2.00-2.50 .079-.098 Description Part Number UMCC PCB Receptacle, 2500 Pc Reel 1566230-1 UMCC PCB Receptacle, 500 Pc Bag 1566230-2 0.25 [.010] 1.8 [.071] 1.0 Ref. [.039] 1.05 Ref. [.041] 2.6 [.102] O 2.0 [.079] 2.2 Ref. [.087] 3.0 [.118] 1.0 [.039] Ref. 0.6 [.024] 1.25 [.049] 0.35 [.014] 1.9 Ref. [.075] 4.0 [.157] Ref. 2.1 [.083] Cut Out Prohibition Area Recommended PC Board Layout PCB Receptacles -- Style B H Max. Receptacle Printed Circuit Board UMCC PCB Receptacle Style Mates with UMCC Connector Type B I B I 2.6 [.102] 1.8 [.071] Mated Height (H) 2.00 .079 2.00 .079 Description Part Number UMCC PCB Receptacle, 2500 Pc Reel 1775146-1 UMCC PCB Receptacle, 500 Pc Bag 1775146-2 0.25 [.010] 1.05 Ref. [.041] 2.6 [.102] 1.00 [.039] Ref. 1.15 [.045] 2.2 Ref. [.087] 3.0 [.118] O 2.1 [.083] 0.6 [.023] 1.0 Ref. [.039] 0.35 [.014] 1.9 Ref. [.075] 4.0 [.157] Ref. 2.1 [.083] Cut Out Prohibition Area Recommended PC Board Layout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 224 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors UMCC -- Ultraminiature Coax Connector and Cable Assembly Series (Continued) Standard Double Ended Cable Assemblies H Max. Receptacle Printed Circuit Board UMCC Connector Type I II III Mated Height (H) 2.00 .079 2.00 .079 2.00 .079 2.00 .079 2.50 .098 2.50 .098 2.50 .098 2.50 .098 2.50 .098 2.50 .098 Cable Dia. 0.80 .031 0.80 .031 0.80 .031 0.80 .031 0.80 .031 0.80 .031 1.32 .052 1.32 .052 1.37 .054 1.37 .054 Length L 100.00 3.937 200.00 7.874 100.00 3.937 200.00 7.874 100.00 3.937 200.00 7.874 100.00 3.937 200.00 7.874 100.00 3.937 200.00 7.874 Mates with PCB Rcpt. Part Number Style B 1750109-1 Style B 1750109-2 Style A 1750108-1 Style A 1750108-2 Style A 1750107-1 Style A 1750107-2 Style A 1750107-3 Style A 1750107-4 Style A 1750107-5 Style A 1750107-6 L 4.0 Ref. [.157] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 225 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors UMCC -- Ultraminiature Coax Connector and Cable Assembly Series (Continued) Interseries Cable Assemblies UMCC Connector Type III II Mated Height (H) 2.50 .098 2.50 .098 2.50 .098 2.50 .098 2.50 .098 2.00 .079 2.00 .079 Cable Dia. Length Description 1.37 .054 1.37 .054 1.37 .054 1.37 .054 1.37 .054 0.80 .031 0.80 .031 200.00 7.874 200.00 7.874 200.00 7.874 200.00 7.874 200.00 7.874 200.00 7.874 200.00 7.874 UMCC Plug to FME Plug UMCC Plug to SMA Plug UMCC Plug to SMA Bulkhead Jack UMCC Plug to MCX Right-Angle Plug UMCC Plug to MMCX Right-Angle Plug UMCC Plug to MCX Right-Angle Plug UMCC Plug to MMCX Right-Angle Plug UMCC to FME Plug 200.0 [7.874] UMCC to SMA Plug 200.0 [7.874] UMCC to SMA Bulkhead Jack 200.0 [7.874] UMCC to MCX Right-Angle Plug 1750110-2 1750110-4 1750110-6 1750110-8 1-1750110-0 1750110-7 1750110-9 20.0 Ref. [.787] 20.0 Ref. [.787] 20.0 Ref. [.787] 200.0 [7.874] UMCC to MMCX Right-Angle Plug Part Number 200.0 [7.874] 20.0 Ref. [.787] 20.0 Ref. [.787] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 226 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors UMCC -- Ultraminiature Coax Connector and Cable Assembly Series (Continued) Adapters UMCC Connector Type Description UMCC Jack Receptacle to SMA Plug UMCC Plug to SMA Jack UMCC Jack Receptacle to SMA Plug UMCC Plug to SMA Jack I II / III 10.60 [.417] Part Number 1775228-1 1775229-1 1775227-1 1775230-1 10.60 [.417] 8.0 Hex. [.315] 1.10 [.043] 8.0 Hex. [.315] 1.10 [.043] O 2.00 [.078] O 1.90 [.074] Part Number 1775228-1 10.0 [.393] Part Number 1775227-1 14.0 [.551] 5.6 [.220] O 6.25 [.246] O 5.3 [.208] 10.0 [.393] O 2.5 [.098] 1/4-36UNS Part Number 1775229-1 5.6 [.220] O 6.25 [.246] O 5.3 [.208] O 2.6 [.102] 1/4-36UNS 14.0 [.551] Part Number 1775230-1 Extraction Tool Part Number 1775231-1 4.50 [.177] 100 [3.937] 30.00 [1.181] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 227 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors UMCC -- Ultraminiature Coax Connector and Cable Assembly Series (Continued) Application Notes Mating/Unmating -- Cable Plugs Pulling Tool 2N Max. Step 1 Step 2 RF Coax Cable 4N Max. 2N Max. Receptacle Printed Circuit Board Mating/Unmating Permissible Load 1. To mate the connectors, insert the cable plug into the SMT receptacle, making sure the cable plug is as vertical as possible and the mating axis of both connectors are aligned. Do not insert on an extreme angle. Do not apply excessive load to the cable after the connectors are mated. Please refer to the permissible loads indicated in the figure to the right. 2. To unmate the connectors, insert the end portion of the extraction tool under the SMT receptacle connector flanges and pull off vertically in the direction of the mating axis. Tape and Reel Packaging Specifications Standard Receptacles 1.75 [.069] 2.0 0.1 [.079 .004] 4.0 0.1 [.157 .004] O 1.50 [.059] Center Contact 0.30 [.012] O 330 [12.99] 5.5 12.0 [.217] [.472] 1.40 [.055] O 13.0 [.512] 1.60 [.063] 8.0 [.315] Dimensions of Taping Dimensions Reel (2500 Pieces/Reel) Soldering Profile -- SMT Receptacle 1. The preferred technique for mounting the SMT Receptacle package is to reflow solder the device onto a PCB (Printed Circuit Board). Hand Soldering (Reference only) 2. Soldering period: within 5 seconds. 2. The maximum temperature for the lead of PCB surface does not exceed 240C. Heating peak 240C - 3 seconds (C) 1. Soldering iron: The maximum temperature is 240C. TEMPERATURE Recommended Temperature Profile (Reference) 260 240 220 200 180 160 140 120 100 80 Preheating 183C (130 to 165C) Within 2 minutes 40 to 50 seconds TIME 3. The right reflow soldering profile is for reference and will modify under individual different conditions. 228 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors Product Facts Able to switch RF signal from internal to external antenna SMD component for standard pick & place Up to 2.4 GHz Up to 30,000 life cycles High radial and axial tolerance capture Low insertion loss Right-angle cable plug with floating for alignment tolerance capture Application in handsets Product Specification 108-71000 Technical Features Impedance -- 50 Ohms Operating Temperature -- -40C to +85C Radial Tolerance Capture -- 1.0 [.039] (except for 3.5 [.138] height) Axial Tolerance Capture -- 0.6 [.024] Plating -- Outer shell and center contact are gold plated Short Stamped Contact -- Selective gold plating Long Stamp Contact (switch) -- Full gold plating with ink barrier Insertion Loss -- 0.30 dB max. at 2 GHz Isolation -- 26 dB min. at 2 GHz VSWR -- 1.15:1 at 1 GHz, below 1.20:1 at 2 GHz Mated Insertion Loss (after life cycle testing) -- Below 0.30 dB at 1 GHz, below 0.45 dB at 2 GHz Unmated Insertion Loss (after life cycle testing) -- Below 0.20 dB at 1 GHz, below 0.35 dB at 2 GHz Packaging on reels for SMD. For more details, refer to the product specification. The Tyco Electronics SMD mobile phone connector system offers a low-cost and effective solution to passive switching between an internal and external phone antenna. When implemented in a cradle kit, the connector helps to make possible hands-free operation of the mobile phone within a vehicle, enhancing safety and permitting compliance with a growing body of legislation. Connection to the external antenna also enhances signal gain and clarity. The connector design accommodates gross misalignment between the Figure 1 -- System Configuration phone and cradle, which is extremely important when blindmating is necessary. The Tyco Electronics switching coax connector system meets all performance objectives, including up to 30,000 connect/disconnect and switching cycles over the connector's life. Figure 2 -- System Configuration 229 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Right-Angle Cable Plugs L1 L2 A D F Note: Hex Crimp Dim. 3.25 [.128] RG/U Cable A 5x5 Square 5x5 Square 6.0 .236 6.0 .236 6.0 .236 6.0 .236 RG 174 D 3.4 .134 3.4 .134 3.4 .134 3.4 .134 3.4 .134 3.4 .134 Dimensions F 6.9 .272 9.6 .378 6.9 .272 9.6 .378 6.9 .272 9.6 .378 SMD Switching Jacks L1 15.6 .614 15.6 .614 15.8 .622 15.8 .622 20.3 .799 20.3 .799 L2 10.9 .429 10.9 .429 10.9 .429 10.9 .429 11.0 .433 11.0 .433 Single Packed Part No. Bulk Packed Part No. 619028-2 5-619028-2 619028-4 5-619028-4 619041-2 5-619041-2 619041-4 5-619041-4 619078-1 5-619078-3 619078-2 5-619078-4 D H l L H 6.0 .236 4.5 .177 3.5 .137 Dimensions L 8.0 .315 8.0 .315 8.0 .315 l Diameter D Part No. 3.2 .126 3.2 .126 3.2 .126 5.4 .213 5.4 .213 5.4 .213 619061-1 619062-1 619072-1 Other models upon request. For all dimensions, stencil and PCB recommended layout, see customer drawing. *Dim. l is the width of the connector on the PCB. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 230 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Switching SMD Jack Low Profile Part Number 619061-1, Part Number 619062-1, and Part Number 619072-1 0.42 [.017 0.08 .003] 2.70 0.25 [.106 .010] O 5.00 [.197] 2.10 0.10 [.083 .004] 3.10 0.10 [.122 .004] O 5.10 [.201] 2.40 0.10 [.094 .004] 0.80 0.05 [.031 .002] 4.30 0.10 [.169 .004] Detail X 3.20 0.10 [.126 .004] 3.80 0.10 [.150 .004] Detail Y 3.70 0.10 [.146 .004] 8.00 0.20 [.315 .008] 0.00 O 3.40 +- 0.05 + .000 [.134 - .002 ] O 5.40 [.213] O 0.60 [.024] A Center Contact Dielectric Outer Shell Second Signal Contact 1.70 [.067] Spring Y Section A-A Area Without Trace 2.40 [.094 A A 0.10 0.020 [.004 .0008] 2.70 0.10 [.106 .004] 0.20 0.07 [.008 .003] 3.10 0.05 [.122 .002] Ground Ground With Solder Stop Mask 0.10 .004] Signal With Solder Stop Mask 0.90 0.05 [.035 .002] Signal 0.10 R 1.50 +- 0.00 + .004 [.059 - .000 ] R 2.70 0.05 [.106 .002] 3.65 0.05 [.144 .002] 3.05 0.05 [.120 .002] 0.080 4.58 +- 0.070 0.080 3.97 +- 0.070 + .0031 + .0031 [.180 - .0028 ] [.156 - .0028 ] Recommended PCB Layout Plating Gold Gold Gold Dim. A 6.00 0.10 .236 .004 4.50 0.10 .177 .004 3.50 0.10 .138 .004 Part No. 619061-1 619062-1 619072-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 231 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Switching SMD Jack ESD Protected Part Number 619133-3 Plating -- Gold 2.35 Max. [.093] R 1.40 [.055] 2.45 4.60 0.30 [.096] [.181 .012] 3.20 [.126] 0.80 [.031] O 5.40 0.10 [.213 .004] A Center Contact Dielectric Spring Outer Shell 6.30 0.10 [.248 .004] 1.64 [.065] Second Signal Spring Contact 3.70 0.25 [.146 .010] 7.00 [.276] 8.00 [.315] 0.50 [.020] A 0.25 0.10 [.010 .004] Section A-A Area Without Track 2.70 0.10 [.106 .004] 0.05 3.10 +- 0.00 + .002 [.122 - .000 ] Ground Ground With Solder Stop Mask 2.40 0.10 [.094 .004] Signal With Solder Stop Mask 0.90 0.05 [.035 .002] Signal 0.05 R 2.70 +- 0.00 + .002 [.106 - .000 ] 3.65 0.05 [.144 .002] 0.10 R 1.50 +- 0.00 + .004 [.059 - .000 ] 3.05 0.05 [.120 .002] 0.080 4.58 +- 0.070 + .0031 [.180 - .0028 ] 0.080 3.97 +- 0.070 + .0031 [.156 - .0028 ] Recommended PCB Layout Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 232 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Switching SMD Jack ESD Protected 4.1mm Height Part Number 619201-1* 5.00 [.197] 0.80 [.031] 1.50 [.059] O 5.80 0.20 [.228 .008] 1.60 [.063] O 4.40 0.20 [.173 .008] Plating -- Gold 0.70 [.028] O 6.20 [.244] 0.70 [.028] 0.00 O 3.40 +- 0.05 + .000 [.134 - .002 ] O 0.56 [.022] Outer Shell Center Contact 3.45 [.136] 1.07 [.042] 3.88 [.153] Dielectric 1.80 0.20 [.071 .008] Spring Contact Mated Position O 4.35 [.171] 2.50 [.098] 0.15 1.00 +- 0.10 + .006 [.039 - .004 ] 4 Plcs. R 0.28 [.011] 1.00 [.039] 45 O 5.00 [.197] Recommended PCB Layout 4.10 [.161] 1.80 [.071] Unmated Position *Mirrored Version of Part Number 619201-1 Also Available Under Part Number 619231-1 Switching SMD Jack Mid Part Number 619075-1 Plating -- Gold B B 2.90 60 [.114] 0.70 [.028] 5.50 0.10 [.217 .004] 0.40 Sq. [.016] 1.90 0.70 [.075] 1.85 [.028] [.073] 1.60 [.063] 0.80 [.031] 0.10 0.02 [.039 .001] R 0.30 [.012] O 5.00 0.10 [.197 .004] 1.25 R 1.75 [.049] [.069] R 2.50 [.098] 0.50 0.05 [.020 .002] R 0.20 [.008] O 2.50 [.098] 0.40 [.016] 3.50 [.138] Dielectric, Plated 38 Dielectric, Unplated D 1.00 [.039] 2.40 0.10 [.094 .004] O 4.20 [.165] D Spring Contact 0.20 [.008] Section B-B Section D-D 2.80 [.110] 0.40 [.016] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 233 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Micro Switching Coax Connector Part Number 619196-1 Plating -- Gold 1.30 [.051] Contact Spring O 1.70 [.067] 10.40 [.409] Shell Angle Outer Shell Plating -- Gold Lid Ferrule Nano Switching Coax Part Number 619213-1 Ground O 3.00 [.118] 8.10 [.319] 1.00 [.039] A 3.00 0.20 [.118 .008] 1.80 [.071] 2.00 [.079] 1.70 [.067] Input Signal A Dielectric, Unplated Section A-A 0.70 [.028] 3.40 [.134] Dielectric, Plated 2.50 [.098] 3.20 [.126] Output Signal 1.54 [.061] O 0.80 [.031] Right-Angle Cable Plug For Micro Switching Coax Connector Cable RG 316/ RG 174 Part Number 619211-2 0.70 [.028] 3.00 [.118] O 3.00 [.118] 0.80 [.031] Copper 0.90 Clearance [.035] 1.40 [.055] Recommended PCB Layout Dielectric Snap Spring Center Contact O 0.70 O 3.50 [.028] [.138] 2.20 [.087] 5.10 Sq. [.201] 4.80 [.189] 7.00 [.276] 0.45 [.018] 1.25 0.05 [.049 .002] Plating -- Gold 0.60 [.024] 3.00 0.05 [.118 .002] 1.05 0.05 [.041 .002] O 1.92 0.15 [.076 .006] 2.65 0.05 [.104 .002] 2.90 [.114] 1.70 0.15 [.067 .006] 2.70 0.15 [.106 .006] 1.55 0.05 [.061 .002] 1.25 0.05 [.049 .002] 0.30 0.05 [.012 .002] 0.55 0.05 [.022 .002] Recommended PCB Layout 2.70 0.15 [.106 .006] 1.45 [.057] O 0.55 [.022] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 234 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Protected Front Contact Cable Plug Part Number 5-619028-1, Part Number 5-619078-1, and Part Number 5-619137-1 3.40 [.134] A Safety Spring Ring O 9.60 [.378] 5.10 [.201] Dielectric O 9.60 [.378] Plating 7.35 [.289] Center Contact Lid Gold Outer Shell Gold Spring Support Gold Washer Shell Angle Protected Front Contact Cable Plug With Cylindrical Interface Part Number 5-619076-2 Part No. 5-619028-1 5-619078-1 *5-619137-1* Bulk packaging. *Outer conductor without slot. Ferrule 15.60 [.614] 10.92 [.430] 6.62 [.261] Dielectric 5.00 0.25 [.197 .010] 0.110 O 2.50 +- 0.010 + .0043 [.098 - .0004 ] Safety Ring Plating -- Gold Bulk packaging. Dim. A 10.92 .430 14.90 .587 10.92 .430 5.10 7.35 [.201] [.289] O 9.60 [.378] 5.67 [.223] Lid Spring Shell Angle Center Outer Contact Shell O 3.50 0.025 [.138 .0010] Spring Support Washer Ferrule Cable Plug/ SMA Jack Adapter Part Number 619052-1 7.00 [.276] Plating -- Gold 35.00 [1.378] 22.00 [.866] 13.00 [.512] Safety Ring 6.62 [.261] Dielectric Dielectric Center Contact O 10.00 [.394] 1/4" - 36 UNS-2A Cable Plug/ SMA Jack Adapter With Conical Flange Part Number 619068-1 7.00 [.276] Plating -- Gold O 6.50 [.256] 22.00 [.866] 35.00 [1.378] Dielectric Outer Shell 5.47 [.215] 13.00 [.512] 6.62 O 8.18 [.261] [.322] O 3.40 [.134] Safety Ring Dielectric Center Contact O 10.00 [.394] 1/4" - 36 UNS-2A O 6.50 [.256] Outer Shell 5.47 [.215] O 3.40 [.134] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 235 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Series Mobile Phone Switching Coax Connectors (Continued) Switching SMD Jack/ SMA Jack Adapter Part Number 619053-1 7.00 [.276] 22.00 [.866] 35.00 [1.378] 13.00 [.512] Dielectric Outer Shell Plating -- Gold Center Contact O 10.00 [.394] 1/4" - 36 UNS-2A Adapter SMA Jack -- MSC Test Plug With Conical Flange Part Number 619210-1 7.00 [.276] O 0.60 [.024] O 6.50 [.256] 22.00 [.866] Dielectric 20 O 5.40 [.213] + 0.020 O 3.40 - 0.080 .0008 [.134 +- .0031 ] 0.17 13.00 +- 0.12 + .007 [.512 - .005 ] O 8.18 [.322] 2.90 [.114] Dielectric Center Contact R 0.35 [.014] O 10.00 [.394] Plating -- Gold O 6.50 [.256] 1/4" - 36 UNS-2A Adapter SMA Jack -- NSC Test Plug With Two-Hole Flange Part Number 619214-1 A 14.00 0.10 [.551 .004] A 8.00 [.314 0.10 .004] O 7.00 0.10 [.276 .004] O 3.40 0.10 [.134 .004] O 5.00 0.10 [.197 .004] Outer Shell O 20.00 0.10 [.787 .004] Plating -- Gold 0.10 O 2.60 +- 0.00 + .004 [.102 - .000 ] 2 Plcs. O 0.70 [.028] 2.20 [.087] Outer Shell 11.40 [.449] Center Contact Pin O 3.00 [.118] 1.00 0.10 [.039 .004] Flange O 7.50 0.20 [.295 .008] Center Contact Female Dielectric Dielectric 8.70 0.20 [.343 .008] 6.00 0.10 [.236 .004] 18.70 0.20 [.736 .008] 28.20 0.30 [1.110 .012] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 236 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Quick Snap Stripline (QSL) Coaxial Connector Coaxial Cable Displacement Interface Low profile Highly reliable ruggedized interface Surface mount technology Excellent price-toperformance ratio Platform expandable to include multi-port versions and other customization Specifications Product Facts Surface mount compatible RoHS compliant (lead-free SMT process [260 C] compatible) PCI / PCI Express compatible Designed for RG 174 & RG 316 Cable, and easily adaptable to other cable types Overall Height < 10 mm Can be packaged to meet IP67 Sealing 10mm x 10.6mm max. footprint (w/o panel extension) 10.00 [.394] Max. Characteristic Impedance -- 50 Ohms Frequency Range -- Dc to 6 GHz VSWR -- 1.3 Max to 3 GHz, 1.5 Max to 6 GHz Rated Voltage -- 60 VAC rms Dielectric Withstanding Voltage -- 800 VAC, 50 Hz (at sea level) Insulation Resistance -- 100 Megohms min Operating Temperature -- -40 to +125C Engagement Force -- < 30 N Disengagement Force -- < 20 N Cable Retention -- 110 N Durability -- 250 cycles 10.00 Max. [.394] Surface Mount Jack Receptacle Part Number 1274794-1 8.00 [.315] Max. Cost effective solution to standard screw machine RF connectors 13.50 Max. [.531] 24.00 Max. [.945] 12.00 [.472] RG-174 8.20 Max. [.323] Applications PCI, Mini PCI, PCI Express Mobile Antenna/GPS/Radio Systems/RFID PDA / PCS / Cellular Handset applications Wireless Communications systems Satellite Communications, Broadcast, Multimedia Automotive Telematics Cable Plug Part Number 1274795-1 Related Product Data Product Specification -- 108-2224 PCI, PCI EXPRESS are trademarks of PCI SIG. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 237 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors DIN Inserts Product Facts Meets requirements of DIN 41626 and CECC 22330 Suitable for DIN 41612 Type M Connectors (Eurocard), Siedecon, and Z-PACK 2mm HM Connectors Meets DIN Performance Level II Crimp termination for inner and outer conductors (cable mount only) eliminates the need for solder Right-angle and vertical style board mount pin and socket contacts Board mount product available with both solder and compliant tails Straight cable mount pin and socket contacts for RG 316, and RG 179 cable Contact impedance of 50 and 75 ohms for cable mount and 50 ohms for board mount Coaxial inserts according to CECC 22 330 and highcurrent inserts (CECC specification under preparation) can be used in conjunction with a DIN 41612 style M contact base (CECC 75 101-801), SIEDECON, and Z-PACK 2mm HM connectors. Coaxial inserts have a contact system based on the pin-socket principle with the same dimensions as the Series 1.0/2.3 coaxial connectors and are plug-compatible. The product family is represented by various 50 and 75 styles that can be used far into the GHz range. The high mounting density (pitch between adjacent contacts starting at 7.5 mm) and installation into the contact base, by means of a "snap-in" lock, make the inserts particularly well suited for applications. Due to the centering, - coaxial plugs are installed in contact bases with audio-frequency (AF) female contacts - coaxial jacks are installed in contact bases with AF male contacts. The high-quality materials used with coaxial inserts ensure a high grade of service even in an industrial atmosphere. Technical Data Electrical and mechanical characteristics of coaxial inserts in accordance with DIN 41626 Part 2 and CECC 22 330 Characteristic Impedance -- 50/75 Frequency Range -- up to 2 GHz Reflection Factor Up To 2 GHz 1 -- 0.10 Insulation Resistance -- Initial value -- 1 G After stressing -- 200 M Screening Effectiveness -- 70 dB Inner Conductor Contact Resistance After Stressing -- 10 m Outer Conductor Continuity After Stressing -- 7.5 m Voltage Proof 2 -- Flexible Cables (RG 316) At sea level -- 750 V, 50 Hz At 20 km altitude -- 150 V, 50 Hz Working Voltage 2 -- Flexible Cables (RG 316) At sea level -- 350 V, 50 Hz At 20 km altitude -- 65 V, 50 Hz Service Life -- 500 cycles Climatic Category -- 55/125/56 Notes 1 Guideline dimensions, depending on cable type and connector style. 2 Some cable types suitable for use with these connectors have lower characteristic values than specified here. 238 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors DIN Inserts (Continued) Coaxial Inserts, 50 Ohm Z-PACK 2mm HM Connectors Vertical PC Board Mount, Compliant 4.15 -0.012 [.163 -.0004] 4.75 -0.03 [.187 -.001] 1.15 +0.30 [.045 +.012] 12.21 [.480] Ref. 5.50 [.216] Min. 900' Typ. 5.10 Max. [.200] Sq. 1.00 0.05 Typ. [.039 .002] 450' Typ. 5.08 0.05 [.200 .002] Recommended PC Board Layout Right-Angle PC Board Mount, Compliant 17.75 Ref. [.700] 5.35 -0.30 [.216 -.012] 7.00 0.10 [.275 .004] 6.10 Max. [.240] Sq. 900' Typ. 450' Typ. 0.03 4.75 0.09 .001 .187 .004 4.20 +0.075 [.165 +.003] 4.00 [.157 Type Vertical PCB Socket, Compliant Rt. Angle PCB Pin, Compliant Coaxial Inserts to SMA Adapters 0.10 .004] 1.00 0.05 Typ. [.039 .002] 5.08 0.05 [.200 .002] Recommended PC Board Layout Housing Type Z-PACK 2mm HM Male Z-PACK 2mm HM Female Application Tooling Part No. 904800-1 5148385-1 904805-1 904804-1 Support Anvil 5148386-1 Coaxial Insert Plug to SMA Jack 7.92 0.12 [.312 .005] Hex. 19.1 [.755] Max. Part No. 1274192-1 Coaxial Insert Socket to SMA Jack 7.92 Hex. [.312] Part No. 1274191-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 239 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors DIN Inserts (Continued) Coaxial Inserts (50 /75 ) Bulkhead Cable Jack for male connectors O 5.8 [.228] 4.05 [.159] 9.6 [.378] O Max. Cable Type 2.6 .102 2.67 .105 RG 316 (50 ) O Max. Cable Type 2.6 .102 2.67 .105 RG 316 (50 ) RG 179 (75 ) Width Across Flats of Hex Profile 3.2 .126 3.2 .126 Part No. 1392020-1 3-1393668-4 23.9 [.941] Bulkhead Cable Jack for female connectors O 5.8 [.228] 4.75 [.187] RG 179 (75 ) Width Across Flats of Hex Profile 3.2 .126 3.2 .126 Part No. 1392019-1 3-1393668-0 9.35 [.368] 23.9 [.941] Right-Angle Bulkhead Jack for male connectors A O 6.0 [.236] Dim A 9.6 [.378] O 4.05 [.159] 13.1 [.516] O Max. Cable Type RG 316 (50 ) 22.4 .882 24.0 .945 2.6 .102 2.67 .105 2.67 .105 2.67 .105 Dim A O Max. Cable Type 18.7 .736 22.3 .878 18.7 .736 18.7 .736 2.6 .102 2.6 .102 3.0 .118 2.67 .105 RG 316 (50 ) 19 .748 Width Across Flats of Hex Profile Part No. 3.2 .126 1-1393668-2 RG 179 (75 ) 3.2 .126 3.2 .126 RG 179 (75 ) RG 179 (75 ) 2-1393668-8 3-1393668-6 Right-Angle Bulkhead Plug for female connectors O 6.0 [.236] A 9.35 [.368] O 4.75 [.187] 13.1 [.516] RG 316 (50 ) RD 316 (50 ) RG 179 (75 ) Width Across Flats of Hex Profile 3.2 .126 3.2 .126 3.6 .142 3.2 .126 Part No. 1393668-4 1393668-8 1393668-7 2-1393668-4 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 240 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors DIN Inserts (Continued) Coaxial Inserts (50 /75 ) (Continued) Bulkhead Plug, PC Board connection for DIN 41612 M female connectors 17.9 [.705] 9.35 [.368] 5.08 [.200] O 4.75 [.187] Part No. 1-1393662-0 O 1.0 [.039] Pitch 2.54 [0.10] Recommended Mounting Hole Right-Angle Bulkhead Jack, PC Board for DIN 41612 M male connectors 17.9 [.705] 3.0 [.118] 9.6 [.378] 4.05 [.159] Part No. 1-1393662-4 6.9 [.272] 5.08 [.200] Right-Angle Bulkhead Plug, PC Board for SIEDECON female connectors 17.8 [.701] 3.0 [.118] 9.35 [.368] O 4.75 [.187] Part No. 1-1393662-2 6.9 [.272] 5.08 [.200] O 1.0 [.039] Pitch 2.54 [0.10] Recommended Mounting holes for Part No. 1-1393662-2 and 1-1393662-4 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 241 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Size 8 Contacts Performance Characteristics Frequency Range -- 0 to 500 MHz Operating Voltage, Max. -- 275 vac rms @ sea level Termination Resistance, Max. -- Center Contact -- 6.0 milliohms Outer Contact -- 3.0 milliohms Insulation Resistance, Min. -- 5,000 megohms @ 500 vdc Dielectric Withstanding Voltage -- Sea Level -- 800 Volts rms 30,000 ft [9,144 m] -- 525 volts rms 70,000 ft [21,336m] -- 275 volts rms VSWR to 500MHz, Max. Pin/Socket Straight/Straight Right-Angle/Straight Right-Angle/Right-Angle VSWR 1.30 1.35 1.40 RF Crosstalk -- 90dB @ 5-500 MHz Mating Force, Max. -- 4.0 lb [17.8 N] Unmating Force, Min. -- 2.0 oz [0.556 N] Contact Retention -- 20 lb [89 N] Contact Durability -- 500 cycles Cable RG/U 316, 188, 174, 179, 179A, 179B 188-type Double-Braid 142, 142A, 142B Force lb [N] 20 89 35 155.8 50 222.5 Moisture Resistance -- 240 hours per MIL-STD-1344, Method 1002, Cond. II Salt Fog -- 48 hours per MIL-STD1344, Method 1001, Cond. B Material Brass -- per QQ-B-626 and MIL-C-50 Phosphor Bronze -- per QQ-B-750 Beryllium Copper -- per QQ-C-530 TEFLON--per MIL-P-19468 Nylon--per MIL-M-20693 Extraction Tool Numbers Subminiature D Housings -- 58095-1 (AMPLIMITE) AMP-HDI Housings -- 58095-2 Finish Bright Tin Plating -- per ASTM-B-571 Copper Plating -- per MIL-C-14550 Gold Plating -- per MIL-G-45204 Nickel Plating -- per QQ-N-290 Operating Temperature -- 55C to +125C Thermal Shock -- 55C to +125C per MIL-STD-1344, Method 1003, Cond. A Physical Shock -- 50 G's per MILSTD-1344, Method 2004, Cond. A Vibration -- MIL-STD-1344, Method 2005, Cond. II Straight Contacts Pin Socket A Max. A Max. B Dia. Max. B Dia. Max. Alignment Ring for use in Subminiature D housing only Die Insert* Pin 59993-1 -- -- 5228618-5 5228596-5 Brass Dimensions A B 24.13 5.94 .950 .234 24.28 5.94 .956 .234 59993-1 5221980-1 -- 5228618-1 5228596-1 Brass 24.28 .956 5.94 .234 59993-1 -- -- 5228618-2 5228596-2 Brass 24.28 .956 27.43 1.08 5.94 .234 6.48 .255 59993-1 -- -- 5228618-3 5228596-3 58212-1 -- 5221981-2 5228618-4 5228596-4 RG/Cable Shell Type 178, 178A, 178B,196, 196A 174, 316, 188, 188A 179, 179A, 179B, 187, 187A, 161, BELDEN 9221 174, 316, 188, Double Braid 142, 142A, 142B, 400, BELDEN 9246 Brass Brass 50 Ohm Socket Non-Impedance Matched Pin Socket *For hand tool 69710-1 or pneumatic tool 69365-8. Note: Non-Impedance Matched and 50 Ohm are not intermateable. BELDEN is a trademark of Belden Wire and Cable Company. TEFLON is a trademark of E.I. Dupont de Nemours and Company. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 242 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Size 8 Contacts (Continued) PC Board Mount Contacts Right-Angle Socket Contact 6.50 [.256] 17.58 [.692] 11.33 [.446] 5.08 0.08 [.200 .003] 1.02 0.08 Dia. [.040 .003] (5 Holes) 2.54 0.08 [.100 .003] 5.08 0.08 [.200 .003] 2.54 0.08 [.100 .003] Recommended PC Board Layout Type Contact Part No. Non-Impedance Matched Right-Angle Socket Contact 5221162-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 243 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors COAXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable on the market COAXICON contacts are of the crimp, snap-in type and are available in the following designs: Miniature Contacts, Subminiature Contacts and Size 8 Contacts Miniature Contacts are designed for high density multiple circuit connector applications. A wide range of cable sizes is accommodated by using three sizes of outer shell termination ends and three sizes of contacts. Subminiature Contacts are used in high density applications and are ideal for mixing coaxial and other styles of pin and socket contacts in the same connector housing. Size 8 Contacts are compatible with industry standard size 8 connectors such as Subminiature D and AMP-HDI connector housings. Straight and right-angle styles, as well as pc board versions for AMP-HDI connectors are available. 244 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Miniature Contacts Performance Characteristics Insulation Resistance -- 5000 megohms min Dielectric Withstanding Voltage -- 1,000 volts rms for 1 minute Contact Resistance -- 2.0 milliohms @ 1 ampere Low-Level Conductivity -- 10 millivolts DC min. VSWR -- 1.3 to 1.0 @ 1,000 MHz max. Cable Retention -- RG/U Cable 58C 188A 180B 195A Retention lbs [N] 50 [222] 30 [133] 28 [125] 16 [71] Temperature Range -- -55C to +125C Test Method for Electronic and Electrical Component Parts -- MIL-STD-202 Material Inner Dielectric -- Polypropylene, nylon, or polymethylpentene, general purpose Retention Spring -- Stainless steel per QQ-S-766 Ferrule -- Copper per QQ-C-576 Finish Outer Shell, Center Conductor -- 0.00076 [.000030] gold over 0.00076 [.000030] nickel Retention Spring -- Nickel per QQ-N-290 Ferrule -- Bright tin per MIL-T-10727 Outer Shell -- Brass per MIL-C-50 Center Conductor -- Brass per QQ-B-626, or Beryllium copper per QQ-C-533 Retention Springs Part No. 201142-2 Note: A ferrule and retention spring (201142-2) are required for each pin and socket. Extraction Tool No. 305183-8 Durability -- 500 cycles @ 10 cycles per minute max. Vibration -- 2 hrs. per MIL-STD-202, Method 201 Shock -- 50 G's per MIL-Std-202, Method 213, Cond. G Temperature Cycling -- 5 cycles per MIL-STD-202, Method 102, Cond C. Ferrules Socket Pin RG/U Cable Ferrule No. Integral Die Hand Tool PRO-CRIMPER Die Insert for Tools: Hand Tool 69710-1 Pneu. 69365-2, 69365-32 316, 188, 188A 174 179, 179A, 179B 161, 187, 187A Belden 9221 188 Double Braid 316 Double Braid 122 180, 180A, 180B 195, 195A, 21-597 Belden 8218 58, 58A, 58B, 58C 141 55, 55A, 55B, 223 124, 140, 210 62, 62A, 62B 59, 59A, 59B 328666-X -- -- 69227-2 201143-5 201144-5 328666-X -- -- 69227-2 201143-1 201144-1 221848-3 58290-1 -- 69227-2 201143-5 201144-5 328664-X 45639-2 91912-3 69222-2 201145-1 -- 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2 328664-X 328663-X 330478-X 45639-2 45740-2 91912-3 -- 69222-2 69220-2 201145-2 201145-4 201146-2 201146-4 69248-4 -- 69315-4 201145-4 201146-4 329006-X -- -- 69675-1 201097-1* 201098-1* 328666-X 91912-4 -- 69672-X 201143-5 201144-5 328663-X 45740-2 -- 69220-2 201145-4 201146-4 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2 Twisted Pair 24-22 AWG [0.2-0.4 mm2] (Stranded)1 Shielded Wire 22, NAS-702, Class B Brand Rex T5788A 26 AWG [0.12-0.155 mm2]3 Part Numbers Pin Socket *These contacts are for use in the 4-position G Series connector modules only. 1Maximum insulation diameter-2.92 [.115] (two wires combined). 2Includes bench mount and foot control; requires Manual Take-Up Attachment No. 69689. 3Dielectric O.D.-2.69 [.106] max.; Cable O.D.-4.06 [.160]. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 245 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Miniature PC Board Sockets Material Shell and Center Contact -- Brass per MIL-C-50 and QQ-B-626 Dielectric -- Polypropylene, or Polymethylpentene, general purpose Shell Finish Spring Latch Center Contact -- 0.00076 [.000030] gold over copper Shell -- Gold plated per MIL-G-45204 Performance Characteristics Dielectric Withstanding Voltage -- 1,000 volts, rms Impedance -- Non-constant Operating Temperature Range -- -55C to +85C 15.24 [.600] 12.7 [.500] 2.54 [.100] 2.54 [.100] Locking Latch Center Conductor Spring Latch Locking Latch 2.54 Ref. [.100] 2.54 Ref. [.100] 6.23 [.245] 4.52 Dia. [.178] Ref. 1.32 [.052] Dia. (5 Holes) A 0.36 Ref. [.014] Recommended Mounting Hole Layout B 12.7 [.500] 1.27 Typ. [.050] Type Spring Latch Spring Latch Locking Latch Locking Latch PC Board Thickness 1.57 .062 3.18 .125 3.18 .125 1.57 .062 2.54 [.100] 17.78 [.700] Retention lb. [N] 1.25 5.56 1.25 5.56 7.25 31.16 7.25 31.16 1.02 Dia. [.040] Dimensions A B 9.07 3.18 .357 .125 7.49 4.75 .295 .187 7.49 4.75 .295 .187 9.07 3.18 .357 .125 Part No. 50084-1 50095-1 50105-1 50107-1 Note: For mateable Miniature Contacts, see page 245. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 246 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Subminiature PC Board Sockets Material Shell and Center Contact -- Brass per MIL-C-50 and QQ-B-626 Dielectric -- Polypropylene, or polymethylpentene, general purpose Shell Locking Latch Finish Center Contact -- 0.00076[.000030] gold per MIL-G-45204 over copper per MIL-C-14550 Shell -- Gold Performance Characteristics Spring Latch Center Conductor Dielectric Withstanding Voltage -- 600 volts, rms Operating Temperature Range -- -55C to +85C 1.09 Dia. [.043] #57 Drill (3 Holes) 22.23 Max. [.875] 3.05 .0.2 [.120 .008] 4.52 [.178] 1.47 [.058] Locking Latch A 0.840.2 [.033.008] 10.16 [.400] 15.24 [.600] 0.84 Dia. [.033] 10.16 [.400] 15.24 [.600] Recommended Mounting Hole Layout PC Board Thickness 1.57 .062 1.57 .062 Type Spring Latch Locking Latch Dim. L 2.54 .100 2.54 .100 Part No. 226023-1 226060-1 Mating Subminiature COAXICON Pins These short Subminiature COAXICON Pins are recommended for use with any of the sockets listed above. Note: Alignment springs are not required for this application and are not included with the pin assemblies. RG/U Cable Ferrule No. Integral Die Hand Tool Die Insert for Tools: Hand Tool 69710-1 Pneu. 69365-2, 69365-3 Part No. 174 316, 188, 188A 179, 179A, 179B 187, 187A 161 1-332056-0 91911-3 69690-X 51563-8 1-332056-0 91911-4 69690-1 51563-8 1-332056-0 69656-5 -- 51563-8 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 247 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Subminiature Contacts Material Outer Shell -- Brass per MIL-C-50 Center Conductor -- Beryllium copper per QQ-C-533 (Pin); Brass per QQ-B-626 (Socket) Inner Dielectric -- Polypropylene, nylon, or polymethylpentene, general purpose Retention Spring -- Stainless steel per QQ-S-766 Ferrule -- Copper per QQ-C-576 Ferrule A Ferrule Finish Outer Shell and Socket Center Conductor -- 0.00076 [.000030] gold over 0.00127 [.000050] nickel Pin Center Conductor -- 0.00076 [.000030] gold over 0.00254 [.000100] copper Ferrule -- Bright tin per MIL-T-10727 16.51 Max. [.650] Pin Socket A = Multimate Pin 25.65 [1.010] Short Pin 22.66 [.892] Selection Chart for Coaxial Cable RG/U Cable 178, 178A, 178B 196, 196A 196 (Double Braid) 174, 316 188, 188A 179, 179A, 179B 187, 187A Belden 9221 RD-316 187 (Double Braid) 161 Die Insert for Tools: Hand Tool 69710-1 Pneu. Tool 69365-2, 69365-3* Multimate Pin 69656-2 69690-2 226537-2 -- 51565-2 1-332057-0 69656-9 -- 226537-2 -- 51565-2 1-225088-1 Integral Die Hand Tool PRO-CRIMPER Contact Part Numbers Short Socket Ferrule Pin -- 91911-3 69690 -226537-1 -- 51565-1 1-332056-0 -- 911911-4 69690-1 226537-1 -- 51565-1 1-332056-0 69656-7 -- 226537-1 -- 51565-1 1-225088-3 69656-8 -- 226537-1 -- 51565-1 1-225088-1 69656-5 -- 226537-1 -- 51565-1 1-332056-0 Selection Chart for Twisted Pairs and Shielded Wire Wire Size AWG 30 (Twisted Pair, Solid) 28 (Twisted Pair, Solid) 28 (Twisted Pair, Stranded; 7 str., .005 [0.13] Dia.) 26 (Twisted Pair, Solid or Stranded; 7 str., .0063 [0.16] Dia.) 26 (Shielded, 0.75 [1.91] Max. O.D.) [mm2] Integral Die Hand Tool PRO-CRIMPER Die Insert for Tools: Hand Tool 69710-1 Pneu. Tool 69365-2, 69365-3* 0.05 69656-2 -- 69690-2 226537-3 51563-3 51565-3 1-332057-0 0.08-0.09 -- 91911-3 69690- 226537-3 51563-3 51565-3 1-332057-0 0.08-0.09 -- 91911-4 69690-1 or 69690-2 226537-3 51563-3 51565-3 1-332057-0 0.12-0.15 -- 91911-3 69690-2 226537-3 51563-3 51565-3 1-332057-0 0.12-0.15 69656-3 -- 69690-3 226537-1 Multimate Pin Contact Part Numbers Short Socket Ferrule Pin -- 51565-1 1-332057-0 *Includes bench mount and foot control. Extraction Tool 305183 Note: A ferrule is required for each pin and socket. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 248 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SIEMAX Connectors Applications Multiplex Systems Base Stations High Density Systems Product Facts Multi Coax Surface Mount Maximum packaging density Component placement on both sides of PCB Fully automated assembly (pick-and-place) Modular design Technical Data Interface: Series 1.0/2.3 Impedance: 75 International specifications: IEC 169-29 and CECC 22 230 Frequency range up to 2 GHz Compact grid pitch 10 [0.39] Guaranteed coplanarity of max. 0.1 [0.004] Integrated positioning pins for manual placement Optional mechanical securing SIEMAX connectors combine the benefits of surface mount technology and modular design. This multi coax connector is packaged in tape-and-reel for automatic placement, has optimum solder joints and 100% reflow suitability. This con- nector is ideal for systems requiring superior packaging density because it can be placed on both sides of the printed circuit board. The modular design provides flexibility in terms of the number of poles offered (two- or three-poles). It can be stacked, enabling any required configuration to be produced. The SIEMAX connector also allows the use of any other connector series, e.g. SMB, is resistant to high temperatures, and is robust, with reliably sustained coplanarity. For General Information on Series 1.0/2.3 Connectors, see Page 129. 249 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors SIEMAX Connectors, Series 1.0/2.3 (75 Ohm) SIEMAX Connector, SMT Right-Angle Jack, 2 Poles 12.10 0.05 [.476 .002] 11.10 0.05 [.437 .002] 24.0 [0.94] O 4.15 [0.16] 2.80 0.05 [.110 .002] 10.0 [0.39] 2.00 x 7 = [.079] 14.00 [.551] 6.5 [0.26] 3.00 0.05 [.118 .002] 7.20 0.05 [.283 .002] 17.50 0.05 [.689 .002] 2.00 0.05 [.079 .002] 5.10 0.05 [.201 .002] 13.00 0.05 [.512 .002] Coupling type* C, F 0.05 [.002] 10 Plcs. 2.00 [.079] 18.0 [0.71] 2.00 [.079] 1.90 0.05 [.075 .002] Part No. 6-1393696-2 0.10 O 1.40 +- 0.00 *For coupling type see DIN 1.0/2.3 Section. + .004 [.055 - .000 ] 0.05 [.002] 8 Plcs. 0.10 1.90 +- 0.00 1.60 0.05 [.063 .002] + .004 [.075 - .000 ] 2.00 x 4 = 8.00 [.079] [.315] PC Board Layout SIEMAX Connector, SMT Right-Angle Jack, 3 Poles 28.0 [1.10] 24.0 [0.94] O 4.15 [0.16] 10.0 [0.39] 6.5 [0.26] 3.5 [0.14] Coupling type* C, F 10.0 [0.39] 12.10 0.05 [.476 .002] 11.10 0.05 [.437 .002] Part No. 6-1393696-7 0.05 [.002] 10 Plcs. 0.10 1.90 +- 0.00 + .004 [.075 - .000 ] *For coupling type see DIN 1.0/2.3 Section. 23 Plcs. 2.00 [.079] 0.10 1.20 +- 0.00 + .004 [.047 - .000 ] 1.90 0.05 [.075 .002] 17.20 [.677] 2.00 x 12 = [.079] 24.00 [.945] 4.00 [.157] 2.80 [.110] O 2.50 [.098] 20.00 [.787] 27.50 0.05 [1.083 .002] 10.00 [.394] 23.00 [.906] 23 Plcs. 4.40 0.05 [.173 .002] 2.00 [.079] 5.10 0.05 [.201 .002] 2.00 [.079] 0.10 O 1.40 +- 0.00 + .004 [.055 - .000 ] 0.05 [.002] 13 Plcs. 1.60 0.05 [.063 .002] 1.90 [.075 + 0.10 - 0.00 + .004 - .000 ] 2.00 x 4 = 8.00 [.079] [.315] Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. PC Board Layout 250 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters Between Series Coaxial Transmission Line Adapters provide convenient transitions between popular series coaxial connectors. The adapter design provides a minimum length consistent with good electrical performance. The small size, low VSWR, and broad frequency coverage permits a wide range of applications in both measurement and systems use. Design and Construction Types Application The standard units are constructed of stainless steel with passivated finish, nickel plated brass, and gold plated brass. The material and plating is to be consistent with the basic connector series. All dielectrics are TFE fluorocarbon. The center contacts are made of beryllium copper, gold plated. The straight in-line adapters are available in many combinations of plug and jack (male and female) configurations. Also, popular panel mount versions are cataloged. For special modifications and hermetic seal version, consult Tyco Electronics. The major application is the requirement for a low VSWR, compact transition in both test system and operating systems. Many panel mount and bulkhead mount versions are available so the designer can use small size connectors for internal design, but adapt to a larger rugged version for external connection. Selection charts follow to help you find the correct adapter for your application. Plug-Plug Page 253 SMP SSMT QMA SSMT Page 253 Series 1.0/2.3 SMP SMA SMB 7-16 BNC OSP Bulkhead OSP N Series Page 253 Page 253 Page 253 Page 253 Page 253 Page 253 Page 253 MCX N Series N Series Flange Mount N Series Bulkhead OSP OSP Bulkhead OSP Floating Rear Mount MCX N Series BNC Series 1.6/5.6 SMA/SMA 18 GHz Page 253 Page 253 Page 253 Jack-Jack Series 1.6/5.6 Series 1.0/2.3 SMB 75 OHM SMB 7-16 TNC TNC Flange Mount TNC Bulkhead BNC BNC Bulkhead N Series BNC TNC SMA SMA Bulkhead SMA 18 GHz Series 1.0/2.3 Page 254 Page 254 Page 254 Page 254 Page 254 and 255 Page 256 Page 254 Page 255 and 256 Page 254 Page 254 and 255 Page 255 Page 255 Page 255 Page 256 251 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Jack-Plug UMCC DIN-Series 1.6/5.6 DIN-Series 1.0/2.3 SSMT SMP Page 256 Page 256 SMA SMA Flange Mount SMA 18 GHz SMB Page 256 Page 256 Page 256 TNC BNC OSP OSP Bulkhead SMA SMA Flange Mount SMA 18 GHz SMP SSMT DIN-Series 1.0/2.3 DIN-Series 1.6/5.6 QMA UMCC N Series N Series Flange Mount N Series N Series Flange Mount OSP OSP Bulkhead BNC TNC TNC Flange Mount SMB 75 OHM SMB MCX 7 mm best VSWR 7 mm 7 mm 7 mm best VSWR MCX Page 256 Page 256 Page 256 Page 257 Page 257 Page 257 Page 257 Page 257 Page 258 Page 258 Page 259 Page 257 Page 257 Page 257 Page 257 Page 258 Page 258 Page 259 Page 258 Page 258 Page 258 Page 260 Page 258 Page 259 Page 259 and 259 Page 259 Page 259 Page 259 Page 259 Page 260 Page 260 Page 260 Page 259 Page 260 Page 260 Page 260 252 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Plug-Plug MCX Plug - SMA Plug 7-16 Plug - N Series Plug 19.3 [.760] Ref. 6.4 Hex. [.250] BNC Plug - SMB Plug 48.6 Ref. [1.912] O 14.3 Ref. [.562] 34.1 [1.343] Ref. O 32.0 Ref. [1.260] 7.9 Hex. [.312] Part No. 1061071-1 Part No. 1313453-1 Part No. 1058066-1 SMA 18 GHz Plug - N Series Plug SMA Plug - SMB Plug SMA Plug - SMP Plug 21.9 [.862] Ref. 32.5 [1.281] Ref. 7.9 Hex. [.312] 6.4 Hex. [.250] 7.9 Hex. [.312] O 21.0 Ref. [.828] 17.5 Ref. [.690] Part No. 1057367-1 Part No. 1060494-1 Part No. 1056706-1 SMA Plug - SSMT Plug SMA Plug - OSP Plug Series 1.6/5.6 Plug - Series 1.0/2.3 Plug 17.0 [.670] Ref. 13.7 Ref. [.538] O 10.8 [0.43] 1) 9.2 [0.36] 7.9 Hex. [.312] Part No. 1055695-1 O 6.5 [0.26] Part No. 1059711-1 28.0 [1.10] 1) 8.9 [0.35] Part No. 2-1393670-1 Coupling Type A 1) Detent for jack BNC Plug - Series 1.6/5.6 Plug QMA Plug - SMA Plug 30.60 Ref. [1.20] O 14.5 [0.57] O 10.8 [0.43] 46.4 [1.83] QMA Plug SMA Plug 7.90 Hex. [0.31] 8.70 Hex. [0.34] Part No. 1408393-1 Part No. 1-1393665-4 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 253 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Jack-Jack 7-16 Jack - N Series Jack BNC Jack - SMB Jack BNC Jack - 75 ohm SMB Jack 30.4 [1.197] 51.0 [2.010] 12.9 [.508] 32.1 [1.265] Ref. O 14.3 Ref. [.562] 3.82 [.150] 17.4 Hex. [.687] 12.0 Across [.472] Flat O 12.9 [.508] 15.8 Hex. [.625] Part No. 1311206-1 Part No. 1058056-1 Part No. 1311209-1 TNC Jack - N Series Flange Mount Jack TNC Jack - BNC Jack MCX Jack - SMA Jack 49.1 Ref. [1.932] 2.0 [.080] 16.7 [.656] 43.1 Ref. [1.698] 25.4 Sq. [1.00] O 3.2 4 Plcs. [.125] 15.6 [.615] 6.4 Hex. [.250] O 14.5 Ref. [.572] 18.2 Typ. [.718] Part No. 1057843-1 Part No. 1057845-1 Part No. 1061070-1 SMA Jack - N Series Jack SMA Jack - N Series Flange Mount SMA Jack - N Series Bulkhead Jack 31.3 [1.231] 31.3 [1.232] 18.2 [.718] 31.3 [1.231] 25.4 Sq. [1.00] O 17.45 Ref. [.687] 4.7 Max. [.187] Panel O 3.2 4 Plcs. [.125] 22.0 [.867] 6.3 Max. [.250] Panel 3.2 [.125] O 15.9 Min. [.625] 13.6 [.534] Min. Recommended Mounting Hole O 22.0 [.866] Part No. 1057341-1 Part No. 1057343-1 Part No. 1057463-1 SMA Jack - BNC Jack BNC Bulkhead Jack - SMA Jack TNC Flange Mount Jack - SMA Jack 33.5 [1.320] Ref. O 14.3 Ref. [.562] 33.5 [1.320] 17.9 [.703] 5.6 [.220] Min. 3.2 Max. [.125] Panel 15.9 Hex. [.625] Part No. 1058058-1 17.4 Hex. [.687] O 12.7 Min. [.500] Recommended Mounting Hole 25.4 [1.000] 2.4 [.093] 8.0 [.315] 17.4 Sq. [.687] 12.7 Typ. [.500] 4.8 [.188] Max. Panel O 11.1 [.437] Part No. 1058117-1 Part No. 1057841-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 254 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Jack-Jack (Continued) SMA Jack - TNC Bulkhead Jack SMB Jack - SMA Jack SMA Jack - SMP Jack 33.0 [1.300] 6.4 Max. [.250] Panel 17.8 [.700] 5.0 Min. [.196] 3.2 [.125] 12.6 [.498] O 11.2 Min. [.439] 4.70 [.187] 6.4 Hex. [.250] Recommended Mounting Hole 14.3 Hex. [.562] O 16.7 [.656] Part No. 1057908-1 Part No. 1056702-1 Part No. 1060487-1 SMA Jack - SSMT Jack SMA 18 GHz Jack - N Series Jack OSP Jack - SMA Bulkhead Jack 17.3 [.680] 3.2 Max. [.125] Panel 31.2 [1.229] Ref. 0.03 O 6.15 +- 0.00 5.8 [.230] + .001 [.242 - .000 ] 12.9 [.508] Ref. 7.9 Hex. [.312] O 17.4 Ref. [.687] Recommended Mounting Hole 7.9 Hex. [.312] Part No. 1055694-1 Part No. 1059733-1 Part No. 1058651-1 SMA 18 GHz Jack - N Series Flange Mount Jack SMA 18 GHz Jack - N Series Bulkhead Jack OSP Jack - SMA Jack 31.3 [1.232] 31.2 [1.229] Ref. O 3.2 4 Plcs. [.125] 16.5 [.650] 18.2 [.718] Typ. 2.0 [.080] 22.0 [.867] 6.3 Max. [.250] Panel 14.1 [.554] 13.6 [.534] Min. 3.2 [.125] O 15.9 Min. [.625] O 7.6 [.300] 4.7 Max. [.187] Panel O 16.0 [.630] Max. Recommended Mounting Hole O 22.0 [.866] 25.4 Sq. [1.000] Part No. 1058653-1 Part No. 1058675-1 SMA Jack - OSP Bulkhead Jack Part No. 1059707-1 OSP Floating Flange Mount Jack - SMA Jack SMA Jack - OSP Floating Rear Mount Jack + .050 11.1 Hex. [.437] 11.1 Hex. [.437] O 9.12 [.359 O 9.6 + .003 - .000 + .001 - .000 ] 22.2 [.874] 1.7 O 9.4 [.372] [.065] 3.2 Max. [.125] Panel 6.4 [.250] 14.1 Ref. [.554] 14.2 [.560] Recommended Mounting Hole O 2.6 [.377 [.102] 2 Plcs. Part No. 1059729-1 9.7 [.380] O 7.6 [.300] 11.2 .076 [.440 .003] 14.2 [.560] O 19.1 [.750] 3.2 Max. [.125] Panel O 8.0 - .000 + .002 [.316 - .000 ] + 0.03 - 0.05 + .002 - .001 ] 22.2 [.874] .000 1.3 +- .127 [.050 Recommended Mounting Hole Part No. 1059731-1 + .000 - .005 ] + .076 O 8.6 - .000 + .003 [.340 - .000 ] Recommended Mounting Hole Part No. 1059724-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 255 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Jack-Jack (Continued) BNC Jack - Series 1.6/5.6 Jack O 9.6 [0.38] Series 1.0/2.3 Jack - Series 1.6/5.6 Jack O 8.2 [0.32] O 8.2 [0.32] O 4.1 [0.16] O 14.5 [0.57] O 11.0 [0.43] 39.4 [1.55] M9.0x0.5 [0.35]x[0.02] 45.4 [1.79] Part No. 1-1393665-5 O 10.8 [0.43] Part No. 2-1393670-4 Coupling Type A, B, F Jack-Plug N Series Plug to 7 mm Jack 19.1 Hex. [.750] O 22.4 Ref. [.880] OSP Plug to 7 mm Jack TNC Plug to 7 mm Jack 19.1 Hex. [.750] 11.1 Hex. [.437] 19.1 Hex. [.750] O 22.4 Ref. [.880] O 22.1 [.870] 43.3 Ref. [1.705] 15.9 Hex. [.625] 30.7 [1.208] Ref. 40.9 Ref. [1.610] Part No. 1061742-1 Part No. 1059713-1 Part No. 1061739-1 SMA Flange Mount Plug to 7 mm Jack SMA Plug to 7 mm Jack N Series Plug to 7 mm Best VSWR Jack O 3.2 4 Plcs. [.125] 19.1 [.750] Typ. 7.9 Hex. [.312] 19.1 Hex. O 22.4 Ref. [.750] [.880] 2.1 [.083] 2.4 Max. [.093] Panel 25.4 Sq. [1.000] 35.0 [1.380] Ref. 19.1 Hex. [.750] 7.9 Hex. [.312] O 22.4 Ref. [.880] 19.1 Hex. [.750] 31.8 [1.25] Ref. O 22.4 Ref. [.880] 43.3 Ref. [1.705] Part No. 1061751-1 Part No. 1053646-1 Part No. 1061738-1 TNC Plug to 7 mm Best VSWR Jack MCX Jack - SMA Plug N Series Jack - 7 mm Plug 19.1 Hex. [.750] 15.9 Hex. [.625] O 22.4 Ref. [.880] 6.4 Hex. [.250] 40.9 Ref. [1.610] Part No. 1061744-1 19.1 Hex. [.750] 16.8 [.660] Ref. 7.9 Hex. [.312] O 22.4 Ref. [.880] 36.7 [1.445] Ref. Part No. 1061073-1 Part No. 1061757-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 256 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Jack-Plug (Continued) N Series Jack - 7 mm Best VSWR Plug 19.1 Hex. [.750] BNC Plug - N Series Jack O 22.4 Ref. [.880] N Series Jack - TNC Plug O 16.8 Ref. [.660] O 16.8 Ref. [.660] 52.7 Ref. [2.076] 36.7 [1.445] Ref. Part No. 1061752-1 51.9 Ref. [2.043] O 15.9 Ref. [.625] Part No. 1057392-1 SMA Plug - N Series Jack 32.8 [1.292] Max. SMA 18 GHz Plug - N Series Jack 7.9 Hex. [.312] 32.3 [1.270] Ref. O 17.4 Ref. [.687] 7.9 Hex. O 17.45 Ref. [.687] [.312] Part No. 1057388-1 SMA Plug - N Series Flange Mount Jack 32.3 [1.270] Ref. O 3.2 4 Plcs. [.125] 7.9 Hex. [.312] 18.2 [.718] Typ. 4.7 Max. [.187] Panel 25.4 Sq. [1.000] Part No. 1057381-1 Part No. 1058664-1 Part No. 1057385-1 OSP Jack - 7 mm Plug SMA Plug - OSP Jack SMA Plug - OSP Bulkhead Jack 29.6 [1.166] Ref. 11.1 Hex. [.437] 17.4 [.685] Ref. O 22.4 Ref. [.880] 17.4 [.686] Ref. O 7.6 [.300] 6.4 [.250] 0.03 O 9.12 +- 0.00 3.2 Max. [.125] Panel + .001 [.359 - .000 ] 7.9 Hex. [.312] 19.1 Hex. [.750] Recommended Mounting Hole 11.1 Hex. [.437] 7.9 Hex. [.312] Part No. 1059720-1 Part No. 1059718-1 Part No. 1059758-1 BNC Jack - N Series Plug BNC Jack - SMB Plug SMA Plug - BNC Jack 34.6 Ref. [1.362] 35.8 [1.408] Ref. 49.1 Ref. [1.934] O 14.3 Ref. [.562] O 21.0 Ref. [.827] Part No. 1057390-1 7.9 Hex. [.312] Part No. 1058077-1 O 14.3 Ref. [.562] Part No. 1058083-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 257 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Jack-Plug (Continued) TNC Jack - 7 mm Plug 19.1 Hex. [.750] TNC Jack - 7 mm Best VSWR Plug O 22.4 Ref. [.880] 19.1 Hex. [.750] TNC Jack - N Series Plug O 22.4 Ref. [.880] 49.1 Ref. [1.934] 41.3 [1.625] Ref. 41.3 [1.625] Ref. O 21.0 Ref. [.827] Part No. 1061753-1 Part No. 1061758-1 Part No. 1057387-1 TNC Flange Mount Jack - SMA Plug SMA Plug - SMB Jack SMA Jack - MCX Plug 26.4 Ref. [1.038] 2.0 [.080] 17.4 Sq. [.687] 12.7 Typ. [.500] 13.4 Ref. [.529] O 11.8 Max. [.465] 20.7 [.815] Ref. 6.4 Hex. [.250] 6.4 Hex. [.250] 7.9 Hex. [.312] 7.9 Hex. [.312] 18.2 [.716] Part No. 1057857-1 Part No. 1060500-1 Part No. 1061072-1 SMA 18 GHz Jack - N Series Plug SMA Jack - BNC Plug TNC Plug - SMA Jack 31.5 [1.250] Ref. 31.8 [1.250] Ref. 25.4 Ref. [1.000] O 15.9 Ref. [.625] O 14.3 Ref. [.562] O 21.0 Ref. [.828] Part No. 1057377-1 Part No. 1058081-1 Part No. 1057853-1 SMA Jack - SMB Plug SMA Jack - SMP Plug SMA Jack - SSMT Plug 19.3 [.760] Ref. 14.2 [.560] 10.5 Ref. [.413] 6.4 Hex. [.250] Part No. 1060498-1 Part No. 1056707-1 Part No. 1055696-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 258 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Jack-Plug (Continued) SMA Jack - UMCC Plug 14.0 [.551] 14.0 [.551] O 6.25 [.246] 10.0 [.393] SMA Jack - UMCC Plug 5.6 [.220] O 2.6 [.102] O 5.3 [.208] 5.6 [.220] O 2.5 [.098] O 5.3 [.208] 2.0 [.080] 25.4 Sq. [1.000] 1/4-36UNS 1/4-36UNS 19.1 Hex. O 3.2 Dia. [.750] [.125] 4 Plcs. O 22.4 Ref. [.880] 19.1 Typ. [.750] O 6.25 [.246] 10.0 [.393] SMA Flange Mount Jack - 7 mm Plug 23.5 Ref. [.925] 30.5 [1.200] Part No. 1775229-1 Part No. 1775230-1 Part No. 1061750-1 SMA 18 GHz Jack - 7 mm Plug N Series Flange Mount Plug - SMA 18 GHz Jack OSP Plug - SMA Jack 31.8 [1.250] O 3.2 4 Plcs. [.125] 11.7 [.461] O 22.4 Ref. [.880] 19.1 Hex. [.750] 30.9 [1.216] Ref. 6.4 Max. [.250] Panel O 12.7 [.500] Min. Panel Hole 25.4 Sq. [1.000] 13.7 [.538] 6.4 [.250] 18.2 [.718] Typ. 2.0 [.080] O 7.6 [.300] Part No. 1053788-1 Part No. 1058666-1 Part No. 1059716-1 SMA 18 GHz Jack - OSP Bulkhead Plug SMP Jack - SMA Plug SSMT Jack - SMA Plug 19.3 [.760] 11.4 [.447] 1.7 [.065] 3.2 [.125] Max Panel 16.0 Ref. [.632] 0.03 O 6.15 +- 0.00 + .001 [.242 - .000 ] 16.2 Ref. [.639] SMA Plug SMA Plug SSMT Jack OSMP Jack Recommended 11.1 Hex. [.437] 7.90 Hex. [.312] 7.9 Mounting Hole Hex. [.312] Part No. 1059756-1 Part No. 1056708-1 Part No. 1055697-1 BNC Jack - Series 1.6/5.6 Plug BNC Plug - Series 1.6/5.6 Jack Series 1.6/5.6 Plug - Series 1.0/2.3 Jack O 9.6 [0.38] O 10.8 [0.43] O 14.5 [0.57] 44.3 [1.74] 45.4 [1.79] O 11.0 [0.43] O 10.8 [0.43] Part No. 1-1393665-7 O 4.1 [0.16] O 14.5 [0.57] Part No. 1-1393665-6 O 8.2 [0.32] 1) 9.2 [0.36] 33.0 [1.30] Part No. 2-1393670-2 Coupling Type A, B2, F2 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 259 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Between Series Adapters (Continued) Jack-Plug (Continued) Series Plug 1.0/2.3 - Series 1.6/5.6 Jack O 10.8 O 6.5 [0.43] [0.26] 8.9 [0.35] QMA Jack - SMA Plug 21.50 Ref. [0.85] O 8.2 [0.32] 1) QMA Jack 6.35 Hex. [0.25] 34.5 [1.36] UMCC Jack - SMA Plug SMA Plug 7.90 Hex. [0.31] 8.0 Hex. [.315] O 2.00 [.078] Part No. 1408343-1 Part No. 2-1393670-3 Coupling Type A, B2, F2 10.60 [.417] 1.10 [.043] Part No. 1775228-1 1) Detent for jack 2 Only jackside UMCC Jack - SMA Plug 10.60 [.417] 1.10 [.043] 8.0 Hex. [.315] O 1.90 [.074] Part No. 1775227-1 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 260 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Coaxial Terminations SMA Plug Terminator Part Number 1460802 Coupling Nut Dielectric Shell Plating -- Gold Frequency -- 6 GHz Center Conductor 2.50 Max. [.098] SW 8 h11 3.40 Max. [.134] 11.00 Max. [.433] Coupling Nut Dielectric Shell SMC Plug Terminator Part Number 1460803 Center Conductor Plating -- Gold Frequency -- 6 GHz 0.10 3.30 +- 0.30 + .004 [.130 - .012 ] 13.00 Max. [.512] Push Pull Plug Terminator Part Number 619219 SW 6 h11 17.70 Ref. [.697] O 7.70 [.303] Plating -- Gold Frequency -- 6 GHz O 8.30 [.327] 8.00 [.315] 5.50 [.217] QMA Plug Terminator Part Number 619271-1 19.80 [.780] Single Packaging Plating -- Standard Gold Part Number 5-619271-1 1000 Pieces per Pack Plating -- Standard Gold O 10.50 [.413] Part Number 619271-2 Single Packaging Plating -- Higher Gold Part Number 5-619271-2 1000 Pieces per Pack Plating -- Higher Gold Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 261 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Application Tooling Installation Kit Part No. 1055469-1 For TNC Connectors Inserts Locator Tool Solder Gage Center Contact Holder Fixture Sub-Assembly For installation of TNC Series connectors to 3.66 [.141] and 2.16 [.085] diameter semirigid cable. Most BNC Series connectors can also be assembled using this kit. See appropriate assembly procedure for specific tooling. This kit contains: Description Center Contact Holder Fixture Sub-Assembly Inserts - 2.16 [.085] (2) Inserts - 3.66 [.141] (2) Locator Tool Locator Tool Solder Gage .813 [.032] Model No. T-4580 T-4567 T-4700-2 T-4700-1 T-4596 T-4574 T-4562-6 NSN -- -- 5120-00-132-6808 5120-00-132-6807 -- -- -- Part No. 1055474-1 1055439-1 1055441-1 1055440-1 1055476-1 1055477-1 1055475-1 All Tools May Be Purchased Separately. 262 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Application Tooling (Continued) Solder Assembly Kit Brass SMA Connectors Item Description Center Contact Holder Kit Part Number 1055420-1 Dielectric Insert Tool Dielectric Recess Tool Fixture Sub-Assembly Inserts -- 2.16 [.085] (2) Inserts -- 3.58 [.141] (2) Inserts Locator Tool Locator Tools Retainer Ring Pliers Solder Gauge 0.25 [.010] Solder Gauge 0.38 [.015] Solder Gauge 0.46 [.018] Dielectric Insert Tool Part No. 1055454-1 1055448-1 1055447-1 1055450-1 1055439-1 1055441-1 1055440-1 1055442-1 1055443-1 1055446-1 1055451-1 1055449-1 1055500-1 1055445-1 1055444-1 Solder Gage Retainer Ring Pliers Dielectric Recess Tool Fixture Sub-Assembly Center Contact Holder Universal Compression Crimp Tool Kit Part Number 1055835-1 Tyco Electronics Universal Compression Crimp Tool offers the ability to rapidly produce cable assemblies using solderless compression crimp connectors with semi-rigid cables. This universal assembly tool kit will attach SMA, OSP, N and TNC series connectors to 3.58 [.141], 2.16 [.085] and 6.35 [.250] cable quickly and consistently with excellent mechanical and electrical results. The tool kit permits single hand assembly. Anvils and cable supports can be quickly changed. Crimp lengths can be adjusted from .025 [.001] to 25.4 [1.000] in increments of .025 [.001]. Sharp radius bends in cables are easily accommodated. The kit contains: Crimp Frame Anvil Gauge Cable Supports Description Crimp Frame Calibration Gauge 3.58 [.141] Cable Support 2.16 [.085] Cable Support SMA Plug Anvil SMA Jack Anvil Type N Plug Anvil Type N Jack Anvil TNC Plug Anvil TNC Jack Anvil OSP Plug Anvil OSP Jack Anvil Part No. 1055831-1 1055832-1 1055833-1 1055834-1 1055836-1 1055837-1 1055838-1 1055839-1 1055840-1 1055841-1 1055842-1 1055843-1 All tools may be purchased separately. 263 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Application Tooling (Continued) Crimping Tools Crimping tools are used for assembling coaxial connectors on coaxial cables. They can be applied particularly economically for small batch sizes. The crimping dies are a fixed part of the crimping tools. Each tool is equipped with 2 or 3 different profiles. A total of 6 widths across flats are possible with 2 tools, whose hand lengths are adapted to the dimensions of the hexagon profiles. The tools can be distinguished at a glance by different colored handles. Item Crimping Tool Crimping Tool Width Across 1 2.8 0.11 2.8 0.11 Flats of the Profile 2 3 3.2 3.6 0.13 0.14 5.4 4.5 0.21 0.18 Dim. L Color of handles Part No. 214.0 8.43 260.0 10.24 Green 1393524-4 Yellow 1393524-5 L 3 50.0 [1.97] Hexagon Profile No. 2 1 6.6 [0.26] with Open Jaws IDC Tool For assembling IDC coaxial connectors Series 1.6/5.6 mS on coaxial cables. Part No. 1-1393524-1 225.0 [8.86] 1.4 [0.04] Removal Tool For replacing the special contacts on connectors DIN 41612 M and SIEDECON. Item Removal tool length 70 [2.76] length 200 [7.87] Spare part Ferrule 12.5 [0.49] 70.0 [2.76] Ferrule (spare part) 200.0 [7.87] Part No. 2-1393524-4 2-1393524-6 2-1393524-7 12.5 [0.49] 264 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Application Tooling (Continued) Setting Gauge Protective Caps/Setting Gauges The setting gauges are used to position coaxial jacks and pre-mating high-current plugs on male connectors DIN 41612 M if the pins are flow-soldered into PC boards. The gauges are held by clamping in connector body and protect the blade contacts. The gauges provide protection -- during transport (if the male connectors have already been removed from the packaging), -- during assembly, -- against soiling, -- during soldering. Male Connector DIN 41612M Item Part No. Setting gauge for types M 1393494-9 M/2 1-1393494-0 M/3 1-1393494-1 Setting Gauge PC Board Note: These gauges can also be used to protect types C, C/2, C/3 and D. ECN1225-P Wrench O 6.7 [0.26] Item Wrench 1.0 [0.04] Used to tighten the threaded ring on bulkhead jack 1393670-8. 1.2 [0.05] 1.5 [0.06] 50.0 [1.97] Item Wrench Part No. 1393488-4 Used to tighten the threaded rings 1-1393562-0 on bulkhead jacks Series 1.6/5.6. 40.0 [1.57] Item Wrench 0.9 [0.04] Part No. 1393488-3 1.0 [0.04] 50.0 [1.97] O 6.1 [0.24] O 7.3 [0.29] Used to tighten the threaded ring on bulkhead jacks Series 1.0/2.3 50.0 [1.97] O 5.6 [0.22] Part No. 1393524-1 Movable O 11.0 O 0.91 [0.43] [0.36] 50.0 [1.97] 1.35 [0.05] ECN1230-Q 265 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Application Tooling (Continued) Hand Tools Pneumatic Tools Tyco Electronics PRO-CRIMPER II Hand Tools are economy versions of our Tyco Electronics CERTI-CRIMP Hand Tools, featuring ratcheted crimp control to provide full die closure and help eliminate partial crimps. With an all new design, the PRO-CRIMPER II hand tools require dramatically less hand force to produce the same connection as comparable tools. Dies are interchangeable. It's the most versatile and reliable crimping tool in the mid-price class. Recommended for networking installations, and commercial, industrial and institutional maintenance work. See Catalog 82276 for further information. The 626 Pneumatic Tool System, as the name implies, will apply a broad range of products in the 6-26 AWG [13-0.12 mm2] wire range. A basic 626 Pneumatic Tool System requires a power unit, a tool holder, a crimp head assembly and a die set when applicable. This premium system is well suited for low- to medium- volume production and harness assembly operations. Since the crimp head can be rotated to any angle, the operator can also work on more difficult terminations in confined equipment cabinets or enclosures. Typical PRO-CRIMPER III Hand Tool No. 58433-1 for 50 Ohm BNC Dual "O" Crimp Commercial Connectors Tyco Electronics CERTI-CRIMP Hand Tools are our top-ofthe-line crimping tools featuring the original ratcheted crimp control. All tools are designed to exacting specifications, and manufactured using the highest quality materials to provide long service life. Recommended for low production runs, repairs and prototype work, and applications requiring consistent, highly-reliable terminations. See Catalog 65780 for further information. Interchangeable tool holder assemblies and crimping heads are available to crimp a variety of products. Crimping heads for the earlier Model 2614 pneumatic power unit can be used with the 626 Pneumatic Tool System. If you are already using Tyco Electronics hand tools, many crimp heads and die sets can be removed, attached to an adapter with quick pins and used with the 626 Pneumatic Tool System. An adapter is even available to accept lower cost die sets of the PRO-CRIMPER II hand tool. For more information, No. 189721-1 order catalog 124208. Bench Mount Assembly for Pneumatic Tool System (Optional) Typical CERTI-CRIMP Hand Tools with Integral (Non-Interchangeable) Dies No. 69477-1 for 50 Ohm BNC Dual Crimp MIL Type Connectors Fully adjustable stand allows operator free use of both hands -- recommended for maximum productivity. No. 220015-1 for 50 Ohm N Connectors No. 856402-1 Battery Powered Crimp Tool CERTI-CRIMP Hand Tool with Interchangeable Dies No. 69710 Take automatic crimping away from the bench to the product, with this convenient, portable, battery-operated tool. It's at home in the factory or in the field. * Completely portable-- performs about 100 crimps per charge * Terminates wires to 10 AWG [6 mm2] * Weighs only 1.57 kg [3.46 lb] including battery; 360 mm [14.2 in] long * Pressure-sensitive cycle control * Kit includes tool, 2 batteries, and charger Part Number 1725837-1 Part Number 1213890-1 (Open Barrel) 266 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Application Tooling (Continued) Bench-Mounted Machines Stripping Tools AMP-O-LECTRIC bench-mounted, semi-automatic terminating machines may be used to apply RF products such as Commercial BNC and TNC Connectors, Miniature and Standard UHF Connectors, and Braid-Pic Contacts and Terminals. The Model G unit features interchangeable applicators, and is used to apply strip-form contacts. The "Coax" unit is used to apply loose-piece contacts and ferrules with dies that are mounted onto the machine. See Catalog 65828 and Customer Manual 409-2627 for further information. The hand-operated Tyco Electronics Coaxial Cable Stripper features interchangeable, color-coded blade cassettes and V-blocks to accommodate 2- or 3-step stripping for cable diameters ranging from 2.54 [.10] through 7.62 [.30]. You strip cable by simply clamping and rotating the tool around the cable. See Instruction Sheet IS 2766 for further information. AMP-O-LECTRIC Model G, No. 354500 Series with Tyco Electronics Crimp Quality Monitor For Use With Connector Type BNC Single Crimp BNC Commercial and UHF Miniature UHF Standard BNC MIL Type Dual Crimp BNC Commercial Dual Crimp Tool No. 603995-1 603995-2 603995-3 603995-5 603995-6 Semi-Rigid Cable Tooling The tools listed here are designed specifically to strip and terminate semi-rigid cable. These tools operate basically the same as the flexible cable tools, in that they produce uniform terminations time after time, without heat damage from soldering. Hand Tool for BNC and TNC Semi-Rigid Cable Connectors No. 59980-1 Frame only-- does not include dies and locator 267 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Application Tooling (Continued) Hand Tool Kit for SMA and Blindmate Connectors Pneumatic Tool for Terminating BNC, TNC, SMA and Blindmate Connectors No. 59981-1 (for RG 402/U and RG 405/U Cable) No. 58318-1* This pneumatic tool is a bench-mounted, semi-automatic power tool designed for easy operation. The operator needs only to depress the trigger to complete a termination. It is used with the cable preparation machine to produce finished terminations. *Includes Locators 220241-1 and 308075-2. Dies are not included. Part Numbers Item Description 59980-1 Military (M22520/) 36-01 220220-2 36-06 220221-2 36-04 220222-2 36-05 312253-1 36-03 312253-2 36-02 311395-1 311396-1 312317-1 36-09 36-07 36-08 220224-1 36-10 311386-1 36-11 311386-2 36-12 311386-3 311392-1 307581-1 312067-1 21027-6 13126-1 13127-1 36-13 -- -- -- -- -- -- Tyco Electronics Hand Tool Plug Locator (without Center Contact) Plug Locator (with Center Contact) Jack Locator Die Set for RG 402/U Cable (3.58 [.141] O.D.) Die Set for RG 405/U Cable (2.18 [.086] O.D.) Cutoff Fixture Cable Dressing Fixture Trimmer Tool Cable Bend Fixture Assembly Includes following 6 items: Bend Segment, RG 402/U (3.18 [.125] Radius) Bend Segment, RG 402/U (6.35 [.250] Radius) Bend Segment, RG 405/U Tool Holder Limiting Pin Conforming Block Hex Wrench Carrying Case Insert, Case 268 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Cable Assembly Capabilities When your RF application demands a high performance cable assembly, make Tyco Electronics your advantage. We specialize in solving tough problems with assemblies designed and manufactured to the most demanding requirements. Why Tyco Electronics? Quite simply, because we can give you a comprehensive engineered solution to your application needs. By providing a precise match between cable, connector and application, we supply cable assemblies that meet your exact needs. Every cable assembly application is unique. A Tyco Electronics custom solution can be designed to meet your special requirements -- whether these are related to return and insertion loss, propagation delay and phase matching, shielding and EMI, or special mechanical issues like density, latching, appearance, flexibility, or even weight. We approach your cable assembly individually, using the vast resources and knowledge gained from years of experience generating custom solutions. By making Tyco Electronics your partner in cable assembly design, you reduce risk and gain the assurance that you will receive assembly on time, to specification and within your budget. Tyco Electronics offers a wide range of RF/Coax Cable assemblies including 50 and 75 Ohm solutions, from micro-miniature UMCC and SSMT to high power assemblies using N-Series and DIN 7/16 connectors. Furthermore, we use a variety of cable types to meet unique requirements from standard military qualified RG cable to low loss foamed PE and PTFE tape wrapped cable as well as semi-rigid. Our engineering experts will find the right combination of materials to provide a solution that is cost effective. 269 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Cable Assembly Capabilities (Continued) Utilizing network analyzers, TDR, and intermodulation test equipment to mention a few, our testing capability allows extensive electrical and environmental characterization of your assembly. We offer full test capabilities right in our manufacturing facilities. Tests such as those listed below can be Harrisburg, PA Product Management Product Development Prototyping, Samples Diecasting Stamping Plating Cable Assembly Norwood, MA Product Development Screw Machining Plating Connector and Cable Assembly, Quick Turn an integral part of the manufacturing process: VSWR, Return Loss, Insertion Loss, Phase matching, Propagation Delay, Impedance, Our cable manufacturing centers are designed to meet your production requirements and delivery needs. Our global locations, combined with Tyco Electronics logistic strengths assures you will get the product where and when you need it. Passive Intermodulation. Ooskampt, Belgium Product Management Product Development Screw Machining Plating Assembly Switzerland Development Eng. Screw Machining Assembly Tesla, Czech Republic Connector Assembly Shenzhen and Hangzhou, China Connector Assembly Hermosillo, Mexico Connector Assembly Cable Assembly Taipei, Taiwan Product Management Product Development Brazil Cable Assembly Shanghai, China Connector Assembly Kunshan, China Product Development Screw Machining Connector and Cable Assembly 270 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Coaxial Cable Assembly Specification Guide Please use this handy reference guide when specifying or building your new cable assembly. Heat Shrink (Optional) A B Label (Optional) Length CONNECTOR A CONNECTOR B INTERFACE INTERFACE example: BNC, MCX, SMA, etc. example: BNC, MCX, SMA, etc. STYLE STYLE example: Straight Plug, Right-Angle Plug, Bulkhead Jack, etc. HEAT SHRINK example: Straight Plug, Right-Angle Plug, Bulkhead Jack, etc. HEAT SHRINK MARKING MARKING CABLE LENGTH LABEL (inch/mm) MARKING RG TYPE OR CABLE MFG. MFG. PART NO. OR FREQUENCY RANGE ELECTRICAL SPECIFICATIONS (MHz/GHz) VSWR OR IMPEDANCE Ohms RETURN LOSS INSERTION LOSS dB INSERTION LOSS SHIELDING EFFECTIVENESS dB DELAY TEMP. RANGE (C/F) MAX. AVG. POWER HANDLING* Watt INSERTION PHASE INTERMODULATION * 25C at sea level and max. specified frequency OTHER SPECIFICATIONS 271 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix A - Theory and Application Theory and Application As a leading manufacturer of RF products, Tyco Electronics produces a large variety of coaxial connectors. The proper selection and application of these connectors requires a knowledge of factors not involved in other types of connectors and terminals. The following paragraphs have been prepared to improve understanding of the theory behind RF connectors: Basic RF Theory1 RF energy travels by electromagnetic waves, and it is primarily the frequency of these waves that we are interested in. Briefly, if an oscillating voltage source is connected to a cable, a continuous electromagnetic wave will propagate along the cable. A sensor placed at some point on the cable would indicate a varying voltage (E field) as well as a current and magnetic field (H field) as the wave travels past it. This is called an electromagnetic wave because both electric and magnetic fields are varying. The wave shape is initially determined by the variation of the source with time. Figure 7 shows the radiant energy spectrum. Visible light, radio, television, x-rays and Gamma rays are all phenomenon of electromagnetic waves at different frequencies. This introduction will treat only those that are generated by an electrical source and propagated along a physical cable or other transmission media. That is, frequencies above zero and up to about 50 gigahertz. 1The majority of the technical terms, relative to RF and coaxial cable and connectors, used here-in and throughout this catalog are defined in the Glossary (Appendix G) starting on page 301. Frequency or Wavelengths Applications VLF (Very Low Frequency) Commercial AC electricity, deep depth sounders, ultrasonic grinders, sonic oscillators 30 - 299.9 KHz LF (Low sonar Frequency) Shallow-to-medium depth sounders 300 - 2999.9 KHz MF (Medium Frequency) Commercial AM radio broadcasting, marine radio telephone, direction finders 3 - 29.9 MHz HF (High Frequency) Citizen band radio, amateur radio, international broadcasting 30 - 299.9 MHz VHF (Very High Frequency) VHF television (Channels 2 thru 13), commercial FM radio broadcasting, amateur radio, fire and police radio 300 - 2999.9 MHz UHF (Ultra-high Frequency) UHF television (Channels 14 thru 83), microwave ovens, aeronautical radionavigation 3 - 29.9 GHz SHF (Super High Frequency) Microwave communications, marine radar, aircraft tracking and airborne radars 30 - 299.9 GHz EHF (Extremely High Frequency) Space communications, radio astronomy Notes: 1. KHz = Kilohertz (1 thousand cycles per second) 2. MHz = Megahertz (1 million cycles per second) 3. GHz = Gigahertz (1 billion cycles per second) Figure 7 Radiant Energy Spectrum Sine Waves An RF wave is a sine wave, meaning that it smoothly swings from zero to a positive peak value, then back down past zero to a negative peak value, then back to zero to complete a 360 electrical degree cycle. The positive and negative peaks are always equal in amplitude. The two qualities which characterize this type of wave are amplitude and frequency (f). Figure 8 shows these two characteristics. Amplitude refers to the peak value attained by the wave and corresponds to voltage. Frequency refers to the number of oscillations per second. For example, the sign wave in Figure 8(B) has completed 12 cycles in one second. Therefore, we would say that this wave has a frequency of 12 cycles per second or 12 Hertz. The time for one complete cycle is defined as the period (T). The relationship between the period and frequency is given by the equation: f = 1 / T in Hertz A Peak Positive Amplitude Peak Negative Amplitude One Cycle Designation 0 - 29.9 KHz In the following paragraphs we will discuss waves in greater detail, including the relationship of frequency and wave length, how pulses are formed and used, how each differs from the other and the problems involved in their transmission. B No. of Cycles 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10 11 11 12 12 1 Second Figure 8 Typical Sine Wave Characteristics The wave travels away from the generator at speeds approaching the speed of light. When an electromagnetic wave travels in a medium other than air or vacuum, the speed for the wave is reduced by a factor of the square root of the dielectric constant ( . The velocity (v) of the propagation of a signal is given by: c __ v= Where c is the speed of light, 3 x 108 m/sec or 1.18 x 1010 in/sec, and is the dielectric constant of the medium. (See Table 1 for dielectric constants of various materials) The wavelength of a signal is given by the formula 10 c 1.18 x 10 inches __________ _________ = v/f = x f (GHz) x f (GHz) See Figure 9 272 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix A - Theory and Application (Continued) Notice that rise time is the time required for the pulse to rise from 10% to 90% of its amplitude - not from zero to maximum. Rise and fall time is perhaps the single most important characteristic of a pulse in today's high-speed digital equipment. Figure 11 shows that the faster the rise and fall time, the more pulses will fit in a given time frame. Inches 1000 Wavelengths 100 A 10 1 0.1 Time .001 GHz .01 GHz .1 GHz 1 GHz 10 GHz 100 GHz B Frequency (MHZ) (MHZ) FREQUENCY TEFLON (E=2.03) AIR (E=1.00) Figure 9 Table 1. Properties of Insulating Materials Dielectric Material _________ TFE Polyethylene Nylon TPX Polypropylene Acetal Dielectric Constant _________ 2.03 2.3 4.6-4.0 2.12 2.25 3.7 Operating Temperature Range __________________ -70 +250C -60 +80C -40 +120C -65 +85C -40 +105C -65 +85C Pulses The sine wave is most often used for communication purposes where intelligence is imposed on the wave by a variation in amplitude (amplitude modulation, AM) or by a variation in frequency (frequency modulation, FM). Pulses, on the other hand, are primarily used in computers and digital instrumentation. Since pulses are generally used for triggering purposes, the pulse rise/fall time, amplitude and width are the most important. Figure 10 shows a pulse and identifies these characteristics. Width 90% 90% Amplitude 10% 10% Fall Time Repetition Rate Rise Time Figure 10 Pulse Characteristics Time Figure 11 Pulse Rise and Fall Time The bit rate for a system is the maximum rate of pulses per second that a system can process without causing data errors. The maximum performance can also be specified in terms of baud rate. The baud rate is defined as the number of characters (bytes) that are transmitted per second. Generally a character represents 10 bits (7 bits for the information, one parity bit, and two for start and stop, totalling 10). Now that we know why fast pulses are required, the next problem is how to obtain faster rise times. A pulse is made up of a great number of different frequencies, and the more high frequencies a pulse contains, the faster will be its rise time and the flatter will be its peak. To better understand this, refer to Figure 12. At A, you will see a fundamental frequency (1), its third harmonic (3), and the resultant waveform (S3), which is a combination of 1 and 3. Although this does not yet resemble a square wave, you will note that the rise time is decreased, and a dip appears at the peak. At B of Figure 12, we have added the fifth harmonic. Rise time is further decreased, and the peak is beginning to flatten out. At C the seventh harmonic has been included, and the resultant wave S7 begins to resemble a square wave. As more high frequency harmonics are added to the waveform, it will more closely resemble a square wave, and the squarer it becomes, the faster will be the rise time. TPX is a trademark of Mitsui Chemicals America, Inc. 273 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix A - Theory and Application (Continued) Fast rise times and short pulse widths require high frequency components. Two frequent causes of digital signal degradation can be (1) high capacitance of the transmission line and (2) impedence mismatches of connector transmission line or I/0 devices. Selection of an impedance-matched connector on a digital line, especially if short cable assemblies are used, can be as important as connector selection for an RF modulated line. Reflected pulses out of phase with the original pulse can cause false signals or high error rates in a digital system. Signal Integrity and Propagation To explain how to maintain signal integrity, it is necessary to review how the signal is configured in a cable and how it propagates. Ignoring digital signals for this discussion we will identify the issues that deal with the integrity of a sine wave. Consider a coaxial cable consisting of an inner conductor surrounded by a dielectric material and then an outer conductor (See Figure 13). The outer conductor may be a braid, a foil, or a solid metal. Since pulses with fast rise times are necessary in highspeed computers, any circuit element which could reduce or attenuate high frequency response is undesirable. Outer Conductor A d S3=1+3 D 1 Dielectric Material Center Conductor Figure 13 3 Diagram of a Cable S3 B S5=1+3+5 An electromagnetic wave traveling in a coaxial cable produces an electric and a magnetic field between the inner conductor and the outer conductor (Figure 14). The electric (E field) is radial and varies in time. An alternating current flows along the inner conductor and the outer conductor. An oscillating magnetic field (H field) circles the inner conductor. E H V 5 Figure 14 S5 Electric field (E) and magnetic field (H) belonging to the principal mode in a coaxial line. C S7=1+3+5+7 7 The alternating current on a conductor is not spread throughout the conductor but is strongest at the surface and decays exponentially at points further into the conductor. This is called the skin effect. At a frequency of 1MHz, three skin depths is 0.0078" (95% of the current is within three skin depths of the surface) and at 10GHz three skin depths is 0.00078". As a result, the current is on the outer surface of the inner conductor and the inner surface of the outer conductor over the entire range of interest for most RF systems. The dimensions and material beyond several skin depths have no effect on the wave; gold plated plastic will propagate as well as gold plated copper at sufficiently high frequencies. Figure 12 Development of a Square Wave 274 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix A - Theory and Application (Continued) Attenuation Reflections A wave loses energy (attenuates) in several ways: (1) The resistance of the inner and outer conductors is small but can be significant over long lengths and will produce some heat. (2) The dielectric may be lossy; its resistance is high but not infinite, and some energy is lost. (3) Electromagnetic energy radiates at high frequencies; significant energy losses are caused by radiation of electromagnetic energy (the cable acts like an antenna). (4) Energy is reflected due to impedance mismatches. The combination of these four types of losses are referred to as the insertion loss of a transmission line system. Connectors have similar losses. When the characteristic impedance changes in a transmission line system, part of an incident wave is reflected. The reflection coefficient can be calculated as: ZR - ZO Vi Reflection Coefficient = = _____ = _______ VR ZR + ZO Where Vi and ZO are the incident voltage and impedance of the first media. VR and ZR represent the reflected voltage and impedance of the media that caused the reflection. The decibel loss due to reflection is given by: Characteristic Impedance A parameter which defines the behavior of a cable, connector, or any propagating system is Characteristic Impedance, Zo. The characteristic impedance of a lossless cable is related to the inductance per unit length, L, and the capacitance per unit length, C, as follows: Zo = L/C in ohms The equivalent circuit of a transmission line is shown in Figure 15. R represents the conductor resistance for a unit length For a coaxial cable the characteristic impedance is given by: D Zo = 138 x Log10 d in ohms where D is the inner diameter of the outer conductor and d is the outer diameter of the inner conductor, respectively. Similar equations apply for other geometries such as two parallel wires. 1 Return Loss = 10 Log10 ( ____ ) dB 1- 2 VSWR The traditional way to determine the reflection coefficient is to measure the standing wave caused by the superposition of the incident wave and the reflected wave. Traditionally the voltage is measured at a series of points using a slotted line. The ratio of the maximum divided by the minimum is the Voltage Standing Wave Ratio (VSWR). The VSWR is infinite for total reflections because the minimum voltage is zero. If no reflection occurs the VSWR is 1.0. VSWR and reflection coefficient are related as follows: VSWR = (1 + )/(1 - ) L R Most present instrumentation measures the reflection coefficient and calculates the VSWR. Figure 16 represents the direct relationship between VSWR and its equivalent in return loss (expressed in dB). C Z0 Figure 15 Typical Transmission Line Schematic Figure 16 The maximum power is transferred between two systems if they have the same impedance. This is called impedance matching. However, impedance variations that are short compared to a wavelength can have a negligible effect on signal loss. Standard impedances are 50 ohm, 75 ohm and 93-125 ohm. Most systems use 50 ohm because it is a compromise between maximum power transmission and minimum line loss. The telephone industry and the broadcast industry use 75 ohm for minimum line attenuation. The need for low capacitance instrumentation cable has produced the 93-125 ohm systems. The higher impedances are generally achieved by changing the conductor diameters and by modifying the dielectric material to add air. VSWR vs. Return Loss Multiple Reflections If there is a series of impedance changes, each one will have a reflection coefficient. The total reflection coefficient is the vector addition of each of the individual coefficients accounting for the distance between reflections and the reflection of any reflected waves. Even though the calculations are difficult, a total VSWR can still be measured. Multiple reflections can produce a resonance phenomenon that is unique to wave theory. Properly understood some serious difficulties can be avoided. An example will make the point clear. Consider an electromagnetic wave with a 275 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix A - Theory and Application (Continued) wavelength of 4 inches traveling on a cable that changes from 50 ohms to 25 ohms. The reflection coefficient is -.33, which means that one third of the incident voltage is reflected toward the source. Assume that one inch (one quarter wavelength) down the cable the impedance changes back to 50 ohm. Again, one third of the wave is reflected, but without any phase shift. It travels back to the first interface where one third of this reflected wave is reflected back toward the second interface. Two thirds of the wave is transmitted through the interface and travels back to the source. Since the first (reflected) wave is shifted 180 degrees at the reflection, and the second (transmitted-reflected-transmitted) wave is shifted 180 degrees because it traveled the one inch separation twice, the two waves are in phase. The net result is that the VSWR is much larger because the length of the 25 ohm section was just the right length to cause a resonance. If the length of the 25 ohm section had been one half wavelength, the two waves would have interfered and the VSWR would be at a minimum. 50 25 50 V out / 4 .66V 1 V out .44V .33V The previous discussions dealing with attenuation, reflections and standing waves can apply to digital signals with some extra thought. A single pulse can be thought of as a combination of high frequency sine waves. The maximum frequency component in a square wave pulse can be calculated by this equation: f = 0.35/rise time where f = GHz when "t" is in nanoseconds Attenuation of the frequencies necessary to support the short risetime will produce a slower rise and possibly prohibit the pulse from ever reaching the detector. This `slurring' of the pulse is similar to the behavior of an RC circuit and the attenuation is sometimes called capacitive attenuation. A series of pulses can demonstrate resonance. If a portion of a pulse is reflected at each interface, it is possible for them to come together and add up to form a new phantom pulse. The critical frequency here is the bit rate. Think of a sine wave with a frequency the same as the bit rate; if it will resonate in the cable, the pulses will also. Extra pulses caused by resonance might easily result in an error signal from the receiving system requesting a retransmittal. The final result would be a communication system that is much slower than intended. / 4 V in Reflections of Digital Signals Cut-off Frequency The cut-off frequency of a coaxial transmission line is the frequency at which modes of energy transmission, other than the "TEM" mode, can be generated. .22V .07V 7.5 7.5 fco = fco = ______ (in (in GHz) GHz) (D+d) (D+d) .15V (D and d are measured in inches) Impedence Mismatch V in = 1 Volt VR =.48 Volt Types of Transmission Lines V out =.52 Volt Figure 17 Multiple Wave Reflections (Caused by Impedance Mismatch) In summary, avoid cable lengths, printed circuit board paths, or connectors that are multiple of one quarter ( /4, 3/4, etc.) of the intended signal transmission wavelength. Coaxial cables, when manufactured, also have periodic variations in diameter that result in periodic changes in impedance (Zo), that can cause significant levels of reflected signal (high return loss) at specific frequencies. Twin Lead transmission cable is generally used where impedance matching alone is important, since it provides only minimal shielding. Impedance values of 300 ohms and 600 ohms are common. Lower impedance values require closer spacing of the conductors and are not normally available in this type of cable. A typical application for twin lead cable is in antenna lead wire for television sets. Twisted Pair is a variation of the twin lead type. It consists of two lengths of ordinary hookup wire twisted together. A twisted pair provides relatively constant impedance plus better magnetic shielding than twin lead cables. It is flexible, inexpensive, easy to terminate and is used extensively by the computer industry. However, it should not be used when maximum shielding is required. 276 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix A - Theory and Application (Continued) Shielded Twisted Pair Cable is used to eliminate inductive and capacitive coupling. Twisting cancels out inductive coupling, while the shield eliminates capacitive coupling. Most applications for this cable are between equipment, racks and buildings. Flexible (Braided) Coaxial Cable is by far the most common type of closed transmission line because of its flexibility. It is a coaxial cable, meaning that both the signal and the ground conductors are on the same center axis. The outer conductor is made from fine braided wire, hence the name "braided coaxial cable". This type of cable is used in practically all applications requiring complete shielding of the center conductor. The effectiveness of the shielding depends upon the weave of the braid and the number of braid layers. Tyco Electronics manufacturers connectors for cable sizes ranging from less than 1/8 in. diameter, for low power applications of around 50 watts, to over 1/2 in. diameter for power of 850 watts at 100 MHz and voltages up to 5000. In addition to power handling capabilities, cables are available for high frequency applications, high and low temperature applications, severe environmental applications and many other specialized uses. Triaxial Cable is used when higher "shielding" efficiency characteristics are required in applications similar to those using shielded twisted pair cable. Signal Conductors Outer Conductor Insulation Outer Conductor Dielectric Dielectric Semirigid Coaxial Cable uses a solid tubular outer conductor rather than the braided type, so that all the RF energy is contained within the cable. One of the drawbacks of braided cable is that the shielding is not 100% effective, especially at higher frequencies. This is because the braided construction can permit small amounts of short wavelength (high frequency) energy to radiate. Normally this does not present a problem; however, if a higher degree of shielding is required, semirigid coaxial cable is recommended. For applications using frequencies higher than 30 GHz a miniature semirigid cable is recommended. Various connectors are available from Tyco Electronics to terminate these cables. Ribbon Coaxial Cable is a relatively recent Tyco Electronics innovation which combines the advantages of both ribbon cable and coaxial cable. Tyco Electronics currently provides both the cable and the insulation displacing coaxial connector to terminate the cable. Each individual coaxial cable consists of the signal conductor, dielectric, a foil shield and a drain wire which is in continuous contact with the foil. The entire assembly is then covered with an outer insulating jacket. The unique manufacturing feature of this cable is the precise placement of the drain wires to permit gang stripping of the outer jacket and foil. The major advantage of this cable is the speed and ease with which it can be mass terminated with the Tyco Electronics insulation displacement technique. They can also be separated into individual coaxial lines and terminated with standard coaxial connectors as required. Middle Conductor Dielectric Insulation Signal Conductors Often you will hear the term "shielded cable". This is very similar to coaxial cable except the spacing between center conductor and shield is not carefully controlled during manufacture, resulting in non-constant impedance. Figure 18 Twin Conductor and Triaxial Cable -1000 9 8 7 6 5 4 th ea d oli Sh S -300 -200 Triax -100 -80 -60 -40 Double Braid Single Copper Braid -30 -20 -10 .01 GHz .1 GHz 1 GHz 10 GHz Figure 19 Shielding Efficiencies 277 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix B - White Bronze High Quality Surface Plating & Excellent Intermodulation Performance for RF Connectors Product Facts Low intermodulation High corrosion resistance Low porosity Low RF losses Wear and scratch resistance Tyco Electronics' industrial electroplating facilities is one of the most advanced in the world. Need more information? Call Technical Support Center at 1-800-522-6752 for product and tooling information. The Technical Support Center is staffed with specialists well versed in all Tyco Electronics products. The Center can provide you with: Engineering Support Catalogs Technical Documents Product Samples Tyco Electronics Authorized Distributor Locations Tyco Electronics Internet Home Page: www.tycoelectronics.com The Tyco Electronics White Bronze surface finish represents a dramatic improvement upon the wear characteristics and life expectancy of silver plating, at the same time offering a far better electrical performance than nickel. White Bronze plated connectors exhibit intermodulation characteristics significantly better than stainless steel or nickel plated products. Silver has always been the preferred finish from an electrical standpoint but its corrosion and wear characteristics especially in harsh conditions are often unacceptable. While nickel is an extremely rugged finish it has properties undesirable in many RF applications; including, high RF and insertion losses, poor intermodulation performance, high permeability and poor screening effectiveness. The Tyco Electronics White Bronze is similar in composition and performance to other copper/tin/zinc alloys developed in the industry such as Sucoplate(R) and BBR. The Tyco Electronics White Bronze is composed of copper, tin and zinc which are applied simultaneously to produce a finished color similar to stainless steel. With one of the most advanced industrial electroplating facilities in the world Tyco Electronics can achieve the levels of control over the complex galvanic process necessary in the application of this alloy. Comprehensive conditioning tests have been performed to provide a thorough evaluation of The Tyco Electronics White Bronze plated connector bodies. The tests were performed to the specifications of the European and International RF connector standards -- CECC 22000/IEC 68-2-14/ IEC 169-1. The results are summarized on page 280. Deposit Characteristics Composition -- Copper (55-60%), Tin (20-25%), Zinc (15-20%) Density -- 7.9-8.1 g/cm3 Hardness -- 300-380 HV Passivation -- Immersion Chrome Sucoplate(R) is a plating trademark for Huber & Suhner. BBR is a plating trademark for Radiall. 278 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix B - White Bronze (Continued) Low Intermodulation Products Dissimilar metals, finishes and discontinuities within a coaxial line structure give rise to Intermodulation Products (IMP). This is of particular concern in applications requiring low levels of intermodulation, such as cellular base stations and antennas. White Bronze plated connectors offer better IMP performance and lifetime characteristics than nickel. Due to the similarity of electrolytic potentials and the non magnetic properties of the finish, levels of intermodulation are commensurate with silver and far in excess of stainless steel/nickel connectors. At the same time the excellent wear characteristics and durability of the finish ensure that the intermodulation life of the connector is greater than silver. The life is also improved as a direct result of the excellent corrosion resistance properties of White Bronze; thereby minimizing metal/metal oxide junctions. Highly Corrosion Resistant Even under continuous exposure to harsh environments White Bronze retains its aesthetic appearance. Unlike silver it does not discolor when exposed to sulphur, potassium sul- phides etc., neither is there any build up in oxide layers as is the case with nickel. Furthermore, White Bronze parts have successfully passed all international salt spray tests (MIL, BS, CECC, IEC). Bronze plated connectors in contact with stainless steel, silver, nickel or nickel containing finishes carry no risk of corrosion as a result of any chemical potential difference. In conditions of continuously high temperatures (>100C) and/or excessive humidity (>100%) there is no build up of foreign layers which may affect contact resistance. Low RF Losses Low Porosity and No Reaction with Contact Surfaces Less than 2m of White Bronze is needed to create a completely nonporous, corrosion resistant surface. Tyco Electronics applies White Bronze to a thickness of between 2m and 3m. This compares favorably with the typical plating thickness of nickel (>10m) and consequently, variations in plating depth are significantly less. White Bronze does not alloy with brass and since its coefficient of expansion is virtually identical to that of brass, rapid temperature shocks (-50C/200C) do not cause blistering or cracking of the plating. The electrolytic potential of White Bronze is approximately that of brass. Consequently, any White The relative permeability (r) of the Tyco Electronics White Bronze is 1 giving rise to low RF losses even at high frequencies. As a direct result of the good conductivity of the finish, skin depth is minimized further reducing insertion loss and ensuring a better impedance match across the frequency range of the connectors. Non Magnetic Finish The Tyco Electronics White Bronze contains no ferrous materials and so has no magnetic properties. This is particularly desirable in many RF applications. Wear and Scratch Resistant The hardness of the Tyco Electronics White Bronze at 300-380HV is more than double that of silver and marginally harder than platings containing nickel. This gives a scratch resistance which is rarely surpassed and makes it ideal for high mating applications. 279 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix B - White Bronze (Continued) Low Coefficient of Friction White Bronze is available on all products, including 7-16, N, TNC, OSP and SMA. The coefficient of friction is approximately 70% that of silver to give lower insertion forces and smoother coupling. These properties combine to produce a harder wearing, longer lasting finish which prolongs connector life and reduces the ongoing cost of ownership. Tyco Electronics' White Bronze Environmental Test Four groups of conditioning tests were performed to provide a comprehensive evaluation of the Tyco Electronics White Bronze plated connector bodies. The tests were performed to the specifications of the European and International RF connector standards - CECC 22000/ IEC 68-2-14/IEC 1691. Full details and relevant data are available from Tyco Electronics and results are summarized below. Test 1 - Industrial Atmosphere & Temperature Endurance 1.1 Industrial Atmosphere Exposure to Sulphur Dioxide Atmosphere (as specified in IEC 68-2-42 Test Kc) for 21 days of mated connectors, previously subjected to 500 matings, to determine the influence of sulphur dioxide on the corrosion resistance properties of White Bronze Plating. Contact resistance measured after matings and sulphur dioxide exposure was less than 5% (0.23mohm) of the permissible specification. 1.2 High Temperature Endurance Exposure to temperatures of 85C 5C for 250 hours, to determine the impact of prolonged high temperatures on plating adhesion. Prior to testing the connectors were subject to 500 matings. Results showed no visual deterioration in plating finish (blistering, cracking etc.) and the results of outer conductivity performance were comparable to Test 1 (above). Test 2 - Rapid Temperature Change & Damp Heat Steady State 2.1 Rapid Temperature Change Exposure to -55C and +85C for 15 minutes, transition time 2-3 minutes, 50 cycles. To determine possible plating deterioration caused by prolonged and rapid temperature change. No visual deterioration, outer conductivity performance were comparable with Test 1 (above). 2.2 Damp Heat Steady State Exposure to 93% relative humidity (at 40C) for 10 days. To determine plating adhesion. No visual deterioration, outer conductivity performance were comparable with Test 1 (above). Test 3 - Soldering Heat 3.1 Resistance to Soldering Heat Exposure to concentrated soldering heat (250C) for 10 seconds to evaluate any possible deterioration in plating finish. No deterioration detected. Test 4 - Salt Mist & Mechanical Endurance 4.1 Salt Mist Exposure to salt mist spray (as defined in BS 2011 Pt. 2.1 Ka) for 48 hours to evaluate the uniformity of protective coatings, any visual deterioration, or impact on electrical performance. No visual deterioration, outer conductivity performance were comparable with Test 1 (above). 4.2 Mechanical Endurance Electrical and visual evaluation of the connectors after 500 matings to determine any electrical or visual deterioration. No visual deterioration, outer conductivity performance were comparable with Test 1 (above). Availability and Ordering Tyco Electronics offers White Bronze on all products including 7-16, N, TNC, SMA and OSP. For more information on White Bronze contact your local Tyco Electronics Sales Office. 280 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix C - Intermodulation in RF Coaxial Connectors Product Facts High quality plating to 6m for IM-sensitive products Restrict materials to copper and its alloys Avoid the use of stainless steel, nickel, ferrites, etc. in the signal path Quality machining Ensure, by design, a properly defined contact interface at connector, panel and contact interfaces Avoidance of crimps The increased demand from the mobile communication industry to provide greater channel capacity coupled with the increased sensitivity of receivers has exposed a condition within RF Coaxial Connectors referred to as Intermodulation Distortion (IMD). This condition occurs when non-linearities within the connectors act as imperfect diodes to generate other frequencies known as Intermodulation Products (IMP). Some of these frequencies appear within the receive band and effectively block the channel. The purpose of this application note is to outline the basic causes of Intermodulation and the techniques Tyco Electronics has undertaken to minimize this condition. IM Basics Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in all Tyco Electronics products. They can provide you with: Technical Support Catalogs Technical Documents Product Samples Tyco Electronics Authorized Distributor Locations Modern developments in base stations for GSM, DCS 1800 and PCS 1900 have necessitated the use of "7-16", "4.1/9.5" and "N" connectors due to the increased power requirements. The requirements for performance are typically in the order of - 160 dBc to -163dBc (when working in dBc) or -120dBm (when working in dBm), both with 2 x (+43dBm) tones. The requirement is so stringent because the connectors are used in post-filtering sections of the transmit path (between the diplexer and the antenna) and also because the system is a full duplex system where the multiple-carrier transmit path is also the receive path. In a truly linear system, the output is directly proportional to the input, following the form of y=mx+c (see fig. 2). Coaxial connectors have traditionally been viewed as following this pattern. In reality, there have always been non-linearities present in coaxial connectors. These were not readily apparent as the resultant IM products were significantly below the noise floor of the system due to relatively weak carrier signals. This situation becomes apparent when the incident power is raised above 30 dBm. The small non-linearities have a characteristic similar to a square-law (see Fig 3). The distortion to the waveform is evident, the Linear vs. Non-linear Response Fig. 2 12 Linear Fig. 3 120 10 100 8 80 6 60 4 40 2 20 0 0 Non-linear 281 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix C - Intermodulation in RF Coaxial Connectors (Continued) IM Basics (Continued) Spectrum of products in a 2-tone system positive 1/2 cycle being significantly greater in amplitude than the negative 1/2-cycle. When converted to the frequency domain, this waveform consists of the desired fundamental plus a decaying series of related harmonics that, in themselves, interact with other carriers present on the transmission line. % Fig. 4 120 Carriers F1 F1 100 Rx band 80 The effect of this interaction produces additional frequencies, some of which occur where they are least wanted (see fig. 4). The 2F1-F2 (3rd order IMP), 3F1-2F2 (5th order IMP) and 4F1-3F2 (7th order IMP) products can all manifest in the receive band and, if sufficiently large, effectively block a channel by making the base station receiver think that a carrier is present when one is not. Tx 2F1-F2 band 2F2-F1 60 3F1-2F2 4F1-3F2 40 3F2-2F1 4F2-3F1 20 0 Frequency (MHz) Potential causes of IM in Coaxial Connectors There are numerous factors which can affect intermodulation performance in RF coaxial connectors. Identified below are the most likely sources of concern: Contaminated plating solution Insufficient plating thickness Corrosion Dissimilar metals in intimate contact Magnetic materials in the signal path Low contact pressure Less than 360-degree contact Poor surface finish Debris and dust within the connector Convoluted signal path Remedies for IM in RF Coaxial Connectors To combat the above identified IM sources, Tyco Electronics undertakes precautions during the design and manufacture of the product, as summarized below: Effect of surface roughness Fig. 5 1.5 High quality plating to 6m for IM-sensitive products Metal The plating must also be free from contaminants and properly passivated with a chromate passivate. Silver has been the preferred plating material as it possesses the lowest practical resistivity thereby minimizing interface contact resistances. Tyco Electronics also offers a unique White Bronze plating finish which provides excellent durability, tarnish resistance and non-magnetic properties ideal for low intermodulation. During testing with a system noise floor of -145 dBm, the difference in performance between the Tyco Electronics silver-plating and the Tyco Electronics White Bronze finish is not discernible (refer to White Bronze Application Note 1307057). Restrict materials to copper and its alloys. This ensures maximum plating adhesion and minimum electrochemical potential difference between the base materials and their over-platings. Avoid the use of stainless steel, nickel, ferrites, etc. in the signal path Magnetic and para-magnetic materials will only compound non-linearites and give poorer interface contact resistances. During experimentation, Tyco Electronics discovered a degradation in performance of 20dB when nickel plate was used. The presence of magnetic or para-magnetic materials will also cause the forward IMP figure to differ from the reverse IMP. Quality machining Surface finish is paramount. The signal propagates within a "skin" if this skin is too rough, the signal will repeatedly transition through metal and surface oxide layers, thereby creating the 1 Air Oxide 0.5 0 -0.5 Signal flow -1 -1.5 same effect as a poor panel contact (see fig. 5). For IM-sensitive designs Tyco Electronics ensures 0.4m is the maximum. Contact design This primarily affects the connector interface. Repeated matings can generate small amounts of plating from the individual parts. These oxidize and interfere with the mechanical (and therefore electrical) mating of connectors. The oxidized debris gives further rise to metal and surface oxide junctions and consequently, higher IM products. Ensure, by design, a properly defined contact interface at connector, panel and contact interfaces Insufficient contact force will give rise to metal to oxide junctions. The classic rectifiers were metal oxide by composition. Axial maximum material condition at the connector interface is critical in order to ensure minimum mismatch and maximum 282 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix C - Intermodulation in RF Coaxial Connectors (Continued) Remedies for IM in RF Coaxial Connectors (Continued) potential of a butt-contact. Panel interfaces generally concern the physical contact of the connector body to the panel. In this case, it has been determined that a protruding feature as close as possible to the body bore will give the best IM performance. The applied mounting force is concentrated in the surface area of the protrusion which, on engagement with the panel, punctures the existing oxide layer to give a metal-to-metal, gas-tight junction. Avoidance of crimps Crimps, by nature, can only give multiple point-contact rather than 360-degree contact and also cause a variability in the position of electrical contact during dynamic testing. IM products will therefore be greater. It has been found that soldered center contacts and clamp/solder outer contacts give the best static and dynamic IM performance. Improving IM Connector Design Tyco Electronics continues to pursue design techniques which improve intermodulation performance to address emerging telecommunication market needs. A state of the art intermodulation test facility and participation on the international (IEC SC46D WG5) committee to develop standard test practices ensures our commitment to the understanding of intermodulation characteristics. This applied technology base is instrumental in developing innovative low intermodulation products for 7-16, Type N, SMA and OSP interfaces. Most commonly asked questions regarding Intermodulation 1. Why is intermodulation such a concern for cellular infrastructure equipment? 5. Are there ways to test for intermodulation in an RF coaxial connector? The primary concerns for cellular service providers today are channel efficiency and clarity of transmission. Growth in demand for mobile communications has created a need to operate equipment at greater capacities and reliability to service the competitive market. Intermodulation degrades or limits the ability of the service provider to operate at optimal levels of performance and may ultimately cause subscribers to experience poor call quality. Intermodulation has become an important factor in system selection to ensure the best possible network service. Yes, very sophisticated methods are needed to test for intermodulation in RF connectors. The test system must utilize extremely sensitive filtering or clean amplification so that the equipment itself has a very low intermodulation noise floor. There is not yet a standardized approach to testing, although an international committee has been formed in the connector industry to address the situation. Tyco Electronics has a state of the art test facility where our designs are optimized for low intermod performance and where further analysis on the effects of this phenomena can be studied. 2. 6. Where is intermodulation most likely to occur in cellular infrastructure equipment? Intermodulation is typically of greatest concern between the filtering elements of the system and the antenna. The introduction of higher power levels for the transmit side of the equipment creates greater potential for intermodulation to occur. This is why the majority of focus for intermodulation concerns 7-16, Type N, SMA and 4.1/9.5 connector interfaces. 3. Is intermodulation a recent development? Intermodulation has always been inherently present in RF coaxial connectors but may be relatively imperceptible in some devices for a variety of reasons. The amount of power applied to an RF connector determines the relative IM threshold which can be observed. Intermodulation is therefore more likely to cause concern in a higher power system, for example, utilizing a 7-16 connector interface rather than an equivalent low power OSX solution. The trend toward higher power digital cellular systems creates the need for greater intermodulation sensitivity. 4. What is the best method of cable attachment for IM sensitive cable assembly applications? Soldering and clamping are preferred methods due to the 360-degree point of contact created at the cable to connector interface. Such intimate contact improves the overall contact resistance leading to improved IM characteristics. In addition, it is also better to solder the center conductor of the connector to the cable versus crimping due to the improved contact resistance path and elimination of voids. Is intermodulation in coaxial connectors frequency dependent? No. Because coaxial connectors are broadband devices there is no frequency dependency. Some apparent variability can be detected during testing but this is not due to the connector. The impedance matches of the output diplexer/triplexer and terminations are the causes of the variations and should not be incorrectly attributed to the connector/assembly. Tyco Electronics Interconnect Business Unit has demonstrated that by varying the impedance match of the test station termination, a DUT can show 15dB better IMP3 than exists in reality. 7. IMP3 in mixers follows a 3dB/dB relationship. What is it for connectors? The relationship is identical. Taking the 3rd order (2F1-F2): varying the power of F2 gives an IMP3 relationship of 1dB/dB whereas varying the power of F1 gives a relationship of 2dB/dB as the IMP is derived from the 2nd harmonic of F1. This gives a total of 3dB/dB when symmetrically varying both carrier powers. 8. I am buying a complete cable assembly from Tyco Electronics. How do I interpret the IMP result now? With caution! It is the Tyco Electronics policy when testing devices to move away from the normal static test to a dynamic test where the cable termination interfaces are mechanically exercised during live IM conditions. It is also a good indicator to customers of the build quality of the assemblies. A dynamic evaluation has shown 15dB degradation in IMP performance for poor assemblies and even as much as 50dB for bad ones.It is therefore strongly advisable that IM performance figures are stated in the context of a dynamic measurement. 283 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications Abbreviations SCCad Br......Silver covered cadmium bronze GS.................Galvanized steel TCCS ............Tin copper covered steel SSC ..............Silver covered strip HR.................High resistance wire SA .................Silver covered alloy Dielectric PE .................Solid polyethylene PTEE .............Solid polyetrafluoroethylene PIB ................Polyisobulylene, Type B, per MIL-C-17 Rubber ..........Per MIL-C-17D Sil .................Silicone rubber PS .................Polystyrene Jacket Material PVC-I ............Black polyvinylchloride, contaminating, Type I, per MIL-C-17D PVC-II ...........Gray polyvinylchloride, noncontaminating, Type II, per MIL-C-17D PVC-IIA.........Black polyvinylchloride, noncontaminating, Type IIA, per MIL-C-17D PE-III.............Clear polyethylene PE-IIIA ..........High molecular weight, black polyethylene, Type IIIA, per MIL-C-17D FG Braid V ....Fiberglass, impregnated, Type V, per MIL-C-17D FEP-IX ..........Fluorinated ethylene propylene, Type IX, per MIL-C-17D PUR ..............Polyurathane, black specific compounds SIL/DAC-VI...Dacron braid over silicone rubber, Type VI, per MIL-C-17D Rubber ..........Per MIL-C-17D Conductors and Braid Materials AL .................Aluminum SCAAI ...........Silver covered copper covered aluminum BC.................Bare copper SC.................Silver covered copper CCS ..............Copper covered steel TC .................Tinned copper SCCS ............Silver covered copper covered steel RG/U Type Cable Inner Conductor Dielectric Material DOD 4 0.81 BC .0320 1.29 BC .0508 1.29 SC .0508 1.29 SC .0508 0.72 CCS .0285 0.72 CCS .0285 0.91 BC .0359 2.17 .0855 7/0.72 BC .0285 2.17 .0855 7/0.72 BC .0285 2.17 .0855 7/0.72 SC .0285 2.17 .0855 7/0.72 SC .0285 2.17 .0855 7/0.72 SC .0285 2.17 .0855 7/0.72 BC .0285 2.17 .0855 7/0.72 BC .0285 1.21 .0477 7/0.4 TC .0159 1.21 .0477 7/0.4 TC .0159 1.21 .0477 7/0.4 TC .0159 PE Air-Space PE .295 .116 4.7 .185 4.6 .181 4.6 .181 4.7 .185 4.7 .185 6.35 .250 PE 5 5A 5B 6 6A 7 8 8A 9 9A 9B 10 10A 11 11A 12 Number/Type of Shielding Braids Jacket Material 2/BC PVC-1 2/BC PVC-1 2/SC PVC-II 2/SC PVC-IIA O.D. Weight (lb/ft) 2/Inner SC Outer BC 2/Inner SC Outer BC PVC-IIA 1/BC PVC-I 5.74 .226 8.43 .332 8.33 .328 8.33 .328 8.43 .332 8.43 .332 9.4 .370 7.24 .285 1/BC PVC-I PE 7.24 .285 1/BC PE 7.11 .280 PE PE PE PE PE PVC-II Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .025 50 30.8 40 80 1900 Use RG 58C .088 52.5 28.5 40 80 3000 Use up to 100 MHz .088 50 30.8 40 80 3000 Use RG 212 .087 50 30.8 40 80 3000 Use RG 212 .081 76 20.0 40 80 2700 Use RG 6A .082 75 20.6 40 80 2700 Good Attenuation Stability .080 95 12.5 40 80 1000 Use RG 63B 10.29 .405 .106 52 29.5 40 80 4000 Use RG 213 PVC-IIA 10.29 .405 .106 52 29.5 40 80 5000 Use RG 213 2/Inner SC Outer BC PVC-II 10.67 .420 .140 51 30.0 40 80 4000 Use RG 214 7.11 .280 2/SC PVC-II 10.67 .420 .140 51 30.0 40 80 4000 Use RG 214 PE 7.11 .280 2/SC PVC-IIA 10.67 .420 .150 50 30.8 40 80 5000 Uase RG 214 PE 7.24 .285 1/BC PVC-II w/Armor 11.76 .463 .146 52 29.5 40 80 4000 Use RG 215 PE 7.24 .285 1/BC PBC-IIA w/Armor 11.76 .463 .146 52 29.5 40 80 5000 Use RG 215 PE 7.24 .285 1/BC PVC-I 10.29 .405 .096 75 20.6 40 80 4000 Use up to 100 MHz PE 7.24 .285 1/BC PVC-IIA 10.29 .405 .096 75 20.6 40 80 5000 Use up to 1000 Mhz PE 7.24 .285 1/BC PVC-II w/Armor 11.76 .463 .141 75 20.6 40 80 4000 Use RG 12A PE 284 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 12A 13 13A 14 14A 15 16 17 17A 17B 18 18A 19 19A 20 20A 21 21A 22 22A 22B 23 23A 24 Inner Conductor Dielectric Material DOD Number/Type of Shielding Braids 1.21 .0477 7.24 PE 7/0.4 TC .285 .0159 1.21 .0477 7.11 PE 7/0.4 TC .280 .0159 1.21 .0477 7.11 PE 7/0.4 TC .280 .0159 2.59 BC 9.4 PE .1020 .370 2.59 BC 9.4 PE .1020 .370 1.45 CCS 9.4 PE .0571 .370 2.59 BC 11.68 .1250 PE .460 Tube 4.78 BC 17.27 PE .1880 .680 4.78 BC 17.27 PE .1880 .680 Cancelled, Reassigned New Nomenclature, RG 177 4.78 BC 17.27 PE .1880 .680 4.78 BC 17.27 PE .1880 .680 6.35 BC 23.11 PE .2500 .910 6.35 BC 23.11 PE .2500 .910 6.35 BC 23.11 PE .2500 .910 6.35 BC 23.11 PE .2500 .910 1.29 4.7 0508 PE .185 High Res. Wire 1.29 4.7 .0508 PE .185 High Res. Wire 2 Cond. 1.16 .0456 7.24 PE 7/0.39 BC .285 .0152 2 Cond. 1.16 .0456 7/0.39 BC .0152 2 Cond. 1.16 .0456 7/.0.39 BC .0152 2 Cond. 2.17 .0855 7/0.72 BC .0285 2 Cond. 2.17 .0855 7/0.72 BC .0285 2 Cond. 2.17 .0855 7/0.72 BC .0285 Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .141 75 20.6 40 80 5000 Use up to 1000 MHz 10.67 .420 .126 74 20.8 40 80 4000 Use RG 216 10.67 .420 .126 52 20.8 40 80 4000 Use RG 216 .216 52 29.5 40 80 5500 Use RG 217 .216 76 29.5 40 80 7000 Use RG 217 .197 52 20.0 40 80 5000 Use up to 1000 MHz .254 52 29.5 40 80 6000 Use up to 1000 MHz .460 52 29.5 40 80 11,000 Use up to 1000 MHz .460 52 29.5 40 80 11,000 Use RG 218 .585 52 29.5 40 80 11,000 Use RG 219 .585 52 29.5 40 80 11,000 Use RG 219 .740 52 29.5 40 80 14,000 Use RG 220 .740 52 29.5 40 80 14,000 Use RG 220 .925 52 29.5 40 80 14,000 Use RG 221 .925 53 29.5 40 80 14,000 Use RG 221 Jacket Material O.D. Weight (lb/ft) 1/BC PVC-IIA w/Armor 11.76 .463 2/BC PVC-I 2/BC PVC-IIA 2/BC PVC-II 2/BC PVC-IIA 2/BC PVC-I 1/BC PVC-I 1/BC PVC-II 1/BC PVC-IIA 1/BC PVC-II w/Armor PVC-IIA w/Armor 1/BC PVC-II 1/BC PVC-IIA 1/BC 13.84 .545 13.84 .545 13.84 .545 16 .630 22.1 .870 22.1 .870 23.50 .925 23.57 .928 28.45 1.120 28.45 1.120 29.92 1.178 29.92 1.178 1/BC PVC-II w/Armor PVC-IIA w/Armor 2/SC PVC-II 8.43 .332 .087 53 29.0 40 80 2700 Use RG 222 2/SC PVC-IIA 8.43 .332 .087 95 29.0 40 80 2700 Use RG 222 1/TC PVC-I 10.29 .405 .105 95 16.0 40 80 1000 Balanced Line w/Twisted Cond. 1/BC PE 7.24 .285 2/TC PVC-II 10.67 .420 .151 95 16.0 40 80 1000 Balanced Line w/Twisted Cond. PE 7.24 .285 2/TC PVC-IIA 10.67 .420 .151 125 16.0 40 80 1000 Balanced Line w/Twisted Cond. PE,2 Cores 9.65 .380 125 12.0 40 80 3000 Use RG 23A PE,2 Cores 9.65 .380 125 12.0 40 80 3000 Dual Coaxial Balanced Line .670 12.0 2/Individual 40 80 3000 Use RG 24A PE,2 Cores 9.65 .380 2/Inidividual Inner Common Outer BC 2/Individual Inner Common Outer BC 2/Individual Inner Common Outer BC PVC-I PVC-IIA PVC-I w/Armor 16.51 x .490 .650 .490 24 .945 16.51 x .490 .650 .490 24 .945 25.48 1.003 19.81 .780 .670 285 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 24A 25A 26A 27A 28B 29 30 31 32 33 34 34A 34B 35 35A 35B 36 37 38 39 40 41 42 Inner Conductor 2 Cond. 2.17 .0855 7/0.72 BC .0285 1.49 .0585 19/0.3 TC .0117 1.49 .0585 19/0.3 TC .0117 2.35 .0925 19/0.47 TC .0185 2.35 .0925 19/0.47 TC .0185 0.81 BC .0320 1.21 .0477 7/0.4 BC .0159 2.17 .0855 7/0.72 BC .0285 2.17 .0855 7/0.72 BC .0285 2.59 BC .1019 2.17 .0855 7/0.72 BC .0285 1.9 .0747 7/0.63 BC .0249 1.9 .0747 7/0.63 BC .0249 2.91 BC .1144 1.6 0.63 2.65 BC .1045 2.65 BC .1045 4.11 BC .1620 0.81 TC .0320 1.15 TC .0453 0.64 CCS .0253 0.64 CCS .0253 1.24 .0490 16/0.25 TC .0100 0.72 .0285 Res. Wire Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .670 125 12.0 40 80 3000 Use RG 23A 12.83 .505 .205 48 50.0 40 80 10,000 -- Rubber-IV w/Armor 12.27 .483 .189 48 50.0 40 80 10,000 -- 1/TC Rubber-IV w/Armor 16.59 .653 .304 48 50.0 40 80 15,000 -- 11.56 .455 2/TC, GS Rubber-IV w/Armor 19.05 .750 .370 48 50.0 40 80 15,000 -- PE 2.95 .116 1/TC PE-111 4.67 .184 0.21 53.5 28.5 55 80 1900 Use RG 58 PIB 4.7 .185 1/BC PVC-I 6.35 .250 .044 50 27.0 40 80 1500 Use RG 58 PIB 7.24 .285 1/BC PVC-I 10.29 .405 .106 51 31.0 40 80 2000 Use RG 213 PIB 7.24 .285 1/BC PVC-I w/Armor 11.81 .465 .141 51 29.0 40 80 2000 Use RG 215 PE 9.4 3.70 None Lead 11.94 .470 .390 51 30.0 55 80 6000 -- PE 11.56 .455 1/BC PVC-I 15.88 .625 .224 71 21.5 40 80 5200 Use RG 31B PE 11.68 .460 1/BC PVC-IIA 16 .630 .224 75 20.6 40 80 6500 Use RG 34B PE 11.68 .460 1/BC PVC-IIA 16 .630 .224 75 20.6 40 80 6500 Use up to 1000 MHz PE 11.68 .460 1/BC PVC-II w/Armor 23.57 .928 .525 71 21.5 40 80 10,000 Use RG 35B PE 1/BC PVC-IIA w/Armor 75 20.6 40 80 10,000 Use RG 35B 1/BC PVC-IIA .525 75 20.6 40 80 10,000 1/BC PVC-I .805 69 22.0 40 80 13,000 Unarmored: see RG 164 Use up to 1000 MHz 1/TC PE-III .040 52.5 38.0 55 80 750 -- 2/TC PE-III .110 52.5 38.0 55 80 1000 -- 2/TC PE-III .100 72.5 28.6 55 80 1000 -- 2/TC Rubber IV 23.57 .928 23.57 .928 29.97 1.180 5.33 .210 7.92 .312 7.92 .312 10.67 .420 .525 Rubber-C 11.68 .460 11.68 .460 23.11 .910 3.56 .140 4.98 .196 4.98 .196 4.98 .196 .150 72.5 28.0 40 80 1000 -- Rubber-IV 6.35 .250 1/TC Rubber-IV 10.8 .425 .150 67.5 27.6 40 80 3000 -- PE 4.98 .196 2/SC PVC-II 8.69 .342 .050 78 20.0 40 80 2700 Use RG 222 Dielectric Material DOD Number/Type of Shielding Braids Jacket Material O.D. Weight (lb/ft) PE,2 Cores 9.65 .380 2/Individual Inner Common Outer BC PVC-IIA w/Armor 25.48 1.003 19.81 .780 Rubber-E 7.32 .288 2/TC Rubber-IV Rubber-E 7.32 .288 1/TC Rubber-D 11.56 .455 Rubber-D PE PE Rubber-C Rubber-C Rubber-C 286 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 43 54 54A 55 55A 55B 56 57 57A 58 58A 58B 58C 59 59A 59B 60 62 62A 62B 63 63A 63B 64 64A 65 Inner Conductor 2 Cond. 2.17 .0855 7/0.72 BC .0285 1.21 .0477 7/0.4 BC .0159 1.16 .0456 7/0.39 BC .0152 0.81 BC .0320 .0.89 SC .0350 0.81 SC .0320 1.49 .0585 19/0.3 BC .0117 2 Cond. 2.17 .0855 7/0.72 BC .0285 2 Cond. 2.17 .0855 7/0.72 BC .0285 0.81 BC .0320 0.9 .0355 0.81 BC .0320 0.9 .0355 19/0.8 TC .0071 0.64 CCS .0253 0.64 CCS .0253 0.58 CCS .0230 1.29 Str. C .0508 0.64 CCS .0253 0.64 CCS .0253 0.61 .0240 7/0.2 CCS .0080 0.64 CCS .0253 0.64 BC .0253 0.64 CCS .0253 1.49 .0585 19/0.3 TC .0117 1.49 .0585 19/0.3 TC .0117 0.2 [.0080] Formex-F 3.25 [.1280] Dia. Helix Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments -- 95 17.6 40 80 1500 Use RG 57 6.99 .275 .045 58 27.0 40 80 2500 Use RG 54A PE-III 6.22 2.45 .041 58 26.5 55 80 3000 Use up to 1000 MHz 2/TC PE-III .032 53.5 28.5 55 80 1900 Use RG 55B 2/SC PVC-IIA .034 50 30.8 40 80 1900 2/TC PE-IIIA 5.08 .200 5.08 .200 5.08 .200 .033 53.5 28.5 55 80 1900 Use RG 223 Use up to 1000 MHz 7.82 .308 2/BC PVC-I 13.59 .535 .243 48 50.0 40 80 8000 -- PE 11.99 .472 1/TC PVC-I 15.88 .625 .225 95 17.0 40 80 3000 Balanced Line Parallel PE 11.99 .472 1/TC PVC-IIA 15.88 .625 .225 95 17.0 40 80 3000 Balanced Line Parallel PE 1/TC PVC-I 53.5 28.5 40 80 1900 Use RG 58B 1/TC PVC-I .029 52 28.5 40 80 1900 1/TC PVC-IIA 4.95 .195 4.95 .195 4.95 .195 .029 PE 2.95 .116 2.95 .116 2.95 .116 .029 53.5 28.5 40 80 1900 Use RG 58C Use up to 1000 MHz PE 2.95 .116 1/TC PVC-IIA 4.95 .195 .029 50 30.8 40 80 1900 Extra Flexible Version RG 58B PE 1/BC PVC-I 73 21.0 40 80 2300 Use RG 59B 1/BC PVC-IIA .032 73 21.0 40 80 2300 1/BC PVC-IIA .032 75 20.6 40 80 2300 Use RG 59B Use up to 1000 MHz 1/BC Rubber-IV .150 50 39.0 40 80 1100 -- 1/BC PVC-I .038 93 13.5 40 80 750 Use RG 62A Low 1/BC PVC-IIA 6.15 .242 6.15 .242 6.15 .242 10.8 .425 6.15 .242 6.15 .242 .032 Air-space PE Air-space PE 3.71 .146 3.71 .146 3.71 .146 6.35 .250 3.71 .146 3.71 .146 .038 93 13.5 40 80 750 Capacitance Air-space PE 3.71 .146 1/BC PVC-IIA 6.15 .242 .038 93 13.5 40 80 750 Extra Flexible RG 62A Air-space PE Air-space PE Air-space PE 7.24 .285 7.24 .285 7.24 .285 7.82 .308 7.24 .285 1/BC PVC-I .083 125 10.0 40 80 1000 Use RG 63B 1/BC PVC-I .083 125 10.0 40 80 1000 Use RG 63B 1/BC PVC-IIA .083 125 10.0 40 80 1000 Low Capacitance 2/TC Rubber-IV 10.29 .405 10.29 .405 10.29 .405 12.57 .495 10.29 .405 .225 48 60.0 40 80 10,000 -- Capacitance Rubber-E 7.32 .288 2/TC Rubber-IV 11.68 .460 .205 48 50.0 40 80 10,000 -- PE 7.24 .285 1/BC PVC-I 10.29 .405 .096 950 44.0 40 80 1000 High Impedance Video Delay Line Dielectric Material DOD Number/Type of Shielding Braids Jacket Material Rubber-B 11.99 .427 1/BC PVC-I 15.67 .617 PE 4.7 .185 1/BC PVC-I PE 4.52 .178 1/TC PE PE 2.95 .116 2.95 .116 2.95 .116 Rubber-D PE PE PE PE Rubber-C Rubber-D O.D. Weight (lb/ft) 287 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 65A 71 71A 71B 72 73 74 74A 77A 78A 79 79A 79B 81 82 83 84A 85A 86 87A 88 88A 88B 89 90 93 Inner Conductor .02 [.0080] Formex-F 3.25 [.1280] Dia. Helix 0.64 CCS .0253 0.64 CCS .0253 0.64 CCS .0253 0.64 CCS .0253 1.65 BC .0650 2.59 BC .1020 2.59 BC .1020 1.49 .0585 19/0.3 TC .0117 1.49 .0585 19/0.3 TC .0117 0.64 CCS .0253 0.64 CCS .0253 0.64 CCS .0253 1.59 BC .0625 3.18 BC .1250 2.59 BC .1020 2.65 BC .1045 2.65 BC .1045 2 Cond. 2.17 .0855 7/0.72 BC .0285 2.44 .0960 7/0.81 SC .0320 1.49 .0585 19/0.3 TC .0117 1.49 .0585 19/0.3 TC .0117 1.49 .0585 19/0.3 TC .0117 0.64 CCS .0253 1.53 .0603 7/0.51 SC .0201 5.08 .2000 19/1.02 BC .0400 Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .096 950 44.0 40 80 1000 High Impedance Video Delay Line .046 93 13.5 40 80 750 Use RG 71B .046 93 13.5 55 80 750 Use RG 71B .046 93 13.5 55 80 750 .169 150 7.8 40 80 750 .031 25 61.8 55 80 1000 Low Capacitance Low Capacitance Low Impedance .310 52 29.5 40 80 5500 Use RG 224 2/BC Copper Braid PVC-II w/Armor PVC-IIA w/Armor 6.22 .245 6.22 .245 6.22 .245 16 .630 4.45 .175 15.32 .603 15.32 .603 .310 52 29.5 40 80 5500 Use RG 224 7.32 .288 2/TC PVC-IIA 11.43 .450 .195 48 50.0 40 80 8000 Peak -- Rubber-E 7.32 .288 1/TC PVC-IIA 10.67 .420 .149 48 50.0 40 80 8000 Peak -- Air-space PE Air-space PE Air-space PE Magnesium Oxide G Magnesium Oxide G 7.24 .285 7.24 .285 7.24 .285 8.15 .321 16.51 .650 6.1 .240 17.27 .680 17.27 .680 1/BC PVC-I w/Armor PVC-I w/Armor PVC-IIA w/Armor Copper Tube Copper Tube 11.76 .463 11.76 .463 11.76 .463 8.26 .325 19.05 .750 10.29 .405 25.4 1.000 39.75 1.565 .136 -- 10.0 40 80 1000 .130 .125 10.0 40 80 1000 .136 .125 10.0 40 80 1000 Low Capacitance Low Capacitance Low Capacitance .172 50 37.0 250 3000 -- .698 50 36.0 250 5000 -- Dielectric Material DOD Number/Type of Shielding Braids Jacket Material PE 7.24 .285 1/BC PVC-IIA 10.29 .405 Air-space PE Air-space PE Air-space PE Air-space PE 2/TC PVC-I 2/TC PE-III 2/TC PE-IIIA 1/BC PVC-I 2/BC PE 3.71 .146 3.71 .146 3.71 .146 11.68 .460 2.95 .116 9.4 .370 9.4 .370 Rubber-E PE PE PE PE PE 2/BC 1/BC 1/BC None None 1/BC PVC-I 1/BC 1/BC PVC-IIA w/Lead Sheath PVC-IIA w/Lead Armor O.D. Weight (lb/ft) .120 35 44.0 40 80 2000 1.325 75 20.6 40 80 10,000 2.910 75 20.6 40 80 10,000 Low Impedance RG 35B with Special Armor RG 84A with Special Armor 7.62 .300 x 16.51 .100 .650 200 7.8 55 80 10,000 Twin Lead PE 7.62 .300 x 16.51 .650 None None PTFE 7.11 .280 2/SC FG Braid-V 10.8 .425 .180 50 29.4 55 250 5000 Use RG 225 Rubber-E 7.32 .288 4/TC PVC-I 13.08 .515 .211 48 50.0 40 80 10,000 -- Ruber-E 7.32 .288 4/TC PVC-IIA 13.08 .515 .211 48 50.0 40 80 10,000 -- Rubber-E 7.32 .288 4/TC Rubber-IV 14.35 .565 .238 48 50.0 40 80 10,000 -- Air-space PE 7.24 .285 1/BC PVC-I 16.05 .632 .195 125 10.0 40 80 1000 Low Capacitance PE 4.95 .195 3/SC, GS, SC PVC-IIA 10.8 .425 -- 50 30.8 40 80 3000 Excellent Shielding Taped PTFE 14.55 .573 1/BC FG Braid-V 18.03 .710 .475 50 29.4 55 250 10,000 Use RG 211A 288 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 94 94A 100 101 102 108 108A 111 111A 114 114A 115 115A 116 117 117A 118 118A 119 120 122 124 125 126 Inner Conductor 2.86 .1125 19/0.57 SC .0225 3.23 .1270 19/0.65 SC .0254 1.87 .0735 19/0.37 BC .0147 1.63 BC .0641 2 Cond. 2.05 BC .0808 2 Cond. 0.96 .0378 7/0.32 TC .0126 2 Cond. 0.96 .0378 7/0.32 TC .0126 2 Cond. 1.16 .0456 7/0.39 BC .0152 2 Cond. 1.16 .0456 7/0.39 BC .0152 0.18 CCS .0070 0.18 CCS .0070 2.13 .0840 7/0.71 SC .0280 2.13 .0840 7/0.71 SC .0280 2.44 .0960 7/0.81 SC .0320 4.78 BC .1880 4.78 BC .1880 4.78 BC .1880 4.78 BC .1880 2.59 BC .1020 2.59 BC .1020 0.76 .0300 7/0.13 TC .0050 0.64 TCCS .0253 0.4 CCS .0159 1.55 .0609 7/0.52 HR .0203 Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .270 50 29.4 55 250 7000 Use RG 226 12.7 .500 .445 50 29.4 55 250 7000 Use RG 226 PVC-I 6.15 .242 .046 35 44.0 40 80 2000 Use up to 1000 MHz 1/TC -- 14.94 .588 -- 75 -- -- -- -- -- 1/TC -- 27.64 1.088 -- 140 -- -- -- -- PE 2.01 .079 Each 1/TC PVC-II 5.97 .235 .032 78 19.6 40 80 1000 Use RG 108A PE 2.01 .079 Each 1/TC PVC-IIA 5.97 .235 .032 78 19.6 40 80 1000 Balanced Line PE 7.24 .285 2/TC PVC-II w/Armor 12.14 .478 .146 95 16.0 40 80 1000 Use RG 111A PE 7.24 .285 2/TC PVC-IIA w/Armor 12.14 .478 .146 95 16.0 40 80 1000 Use RG 22B w/Armor Air-space PE Air-space PE 7.24 .285 7.24 .285 1/BC PVC-I .087 185 6.5 40 80 1000 Use RG 114A 1/BC PVC-IIA 10.29 .405 10.29 .405 .087 185 6.5 40 80 1000 Low Capacitance Taped PTFE 6.35 .250 2/BC FG Braid-V 9.53 .375 .148 50 29.4 55 250 5000 Use RG 115A Taped PTFE 6.48 .255 2/BC FG Braid-V 10.54 .415 .180 50 29.4 55 250 5000 Extra Flexible RG 225 PTFE 7.11 .280 2/SC FG Braid-V w/Armor 12.7 .475 .198 50 29.4 55 250 5000 Use RG 227 PTFE 1/BC 18.54 .730 18.54 .730 19.81 .780 19.81 .780 11.81 .465 13.28 .523 50 29.4 55 250 7000 Use RG 211A .641 50 29.4 55 250 7000 Use RG 211A .682 50 29.4 55 250 7000 Use RG 228A .682 50 29.4 55 250 7000 Use RG 228A .225 50 29.4 55 250 6000 2/BC FG Braid-V FG Braid-V FG Braid-V w/Armor FG Braid-V w/Armor FG Braid-V FG Braid-V .641 PTFE 15.75 .620 15.75 .620 15.75 .620 15.75 .620 8.43 .332 8.43 .332 .282 50 29.4 55 250 6000 Use up to 1000 MHz RG 119 w/Armor PE 2.44 .096 1/TC PVC-IIA 4.06 .160 .016 50 29.4 40 80 1900 Use up to 1000 MHz Taped PTFE Air-space PE 3.43 .135 11.68 .460 1/TC FG Braid-V .210 73 20.3 55 250 2300 Use RG 140 1/BC PVC-IIA 6.1 .240 15.24 .600 .180 150 7.8 40 80 2000 Low Capacitance PTFE 4.7 .185 1/HR FG Braid-V 7.11 .280 .070 50 29.4 55 250 3000 High Loss Cable Dielectric Material DOD Number/Type of Shielding Braids Jacket Material Taped PTFE 7.42 .292 2/BC FG Braid-V 11.3 .445 Taped PTFE 9.4 .370 2/BC FG Braid-V PE 3.71 .146 1/BC Rubber -- Rubber PTFE PTFE PTFE PTFE 1/BC 1/BC 1/BC 2/BC O.D. Weight (lb/ft) 289 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 130 131 133 133A 140 141 141A 142 142A 142B 143 143A 144 145 146 147 148 149 150 156 157 158 159 160 161 164 Inner Conductor 2 Cond. 2.17 .0855 7/0.72 BC .0285 2 Cond. 2.17 .0855 7/0.72 BC .0285 0.72 BC .0285 0.64 BC .0253 0.64 SCCS .0250 0.91 SCCS .0359 0.99 SCCS .0390 0.91 SCCS .0359 0.99 SCCS .0390 0.99 SCCS .0390 1.45 SCCS .0570 1.5 SCCS .0590 1.36 .0537 7/0.45 SCCS .0179 2 Cond. 1.83 BC .0720 0.18 CCS .0070 6.35 BC .2500 2.17 .0855 7/0.72 BC .0285 1.22 .048 7/0.4 TC .0159 1.22 .048 7/0.4 TC .0159 2.17 .0855 7/0.72 TC .0285 2.55 .1005 19/0.51 TC .0201 5.05 .1988 37/0.72 TC .0284 0.81 SC .0320 4 Cond. 1.8 .071 19/0.36 2TC, 2BC .0142 0.3 .012 7/0.1 S Cad. BR .004 2.65 BC .1045 Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .220 95 17.0 40 80 3000 RG 57 w/ Twisted Cond. 17.35 .683 .290 95 17.0 40 80 3000 Armored RG 130 .094 95 16.2 40 80 4000 Use RG 133A .094 95 16.2 40 80 4000 .056 75 19.5 55 250 2300 95 Ohm Version RG 8 See RG 302 for FEP Jacket .036 50 29.4 55 250 1900 Use RG 141A FG Braid-V 10.29 .405 10.29 .405 5.92 .233 4.83 .190 4.83 .190 4.95 .195 4.95 .195 4.95 .195 8.26 .325 8.26 .325 .109 50 29.4 Copper Tube FG Braid-V 10.41 .410 .137 75 1/BC Lead/Tar -- -- 75 1/BC FG Braid-V .108 190 6.0 1/BC PVC-I w/Armor 9.53 .375 49.2 1.937 -- 52 7.24 .285 1/SC PVC-I w/Armor 20.32 .800 -- PE 7.24 .285 1/BC PVC-IIA 10.29 .405 PE 7.24 .285 1/BC PVC-IIA w/Armor PE and Cond. PE 7.24 .285 3/TC, GS, TC PE and Cond. PE 11.56 .455 PE and Cond. PE Dielectric Material DOD Number/Type of Shielding Braids Jacket Material PE 11.99 .472 1/TC PVC-I 15.88 .625 PE 11.99 .472 1/TC PVC-I w/Armor PE 1/BC PVC-I 1/BC PVC-IIA 1/SC FG Braid-V 1/SC FG Braid-V PTFE 7.24 .285 7.24 .285 3.71 1.46 2.95 .116 2.95 .116 2.95 .116 2.95 .116 2.95 .116 4.7 .185 4.7 .185 1/SC Air-space PE 7.24 .285 Air-space PTFE -- PE PE 7.24 .285 23.11 .910 PTFE PE PTFE PTFE O.D. Weight (lb/ft) .036 50 29.4 55 250 1900 See RG 303 for FEP Jacket .047 50 29.4 55 250 1900 Use RG 142A .047 50 29.4 50 250 1900 .047 50 29.4 55 250 1900 See RG 142B for FEP Jacket Standard Center Cond. Available .114 50 29.4 55 250 3000 Use RG 143A 55 250 3000 See RG 304 for FEP Jacket 19.5 55 250 5000 High Temp. RG 11A 14.6 -- -- -- 55 200 1000 29.5 40 80 14,000 Low Capacitance RG 19U w/Armor 52 29.5 40 80 4000 -- .105 75 20.6 40 80 5000 Use RG 391 11.76 .463 .112 75 20.6 40 80 5000 Use RG 392 PVC-IIA 13.72 .540 .211 50 32.0 40 80 10,000 Triaxial Pulse Cable 3/TC, GS, TC PVC-IIA 18.42 .725 .317 50 38.0 40 80 15,000 Triaxial Pulse Cable 11.56 .455 3/TC, GS, TC PVC-IIA 18.42 .725 .380 25 78.0 40 80 15,000 Triaxial Pulse Cable Taped PTFE 2.95 .116 1/SC FG Braid-V 4.95 .195 .035 50 29.4 55 250 1900 Use RG 141 PE 8.18 .322 1/BC PVC-I 26.8 1.055 -- 125 12.0 40 80 3000 4 Cond. Balanced Line PTFE 1.45 .057 1/SC Nylon 2.08 .082 .015 70 20.0 60 120 1000 Miniature PE 17.27 .680 1/BC PVC-IIA 22.1 .870 .490 75 20.6 40 80 10,000 RG 35B without Armor PTFE PTFE PTFE PTFE PTFE 1/SC FG Braid-V 2/SC FG Braid-V 2/SC FG 2/SC FEP 2/SC FG Braid-V 290 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 165 166 174 174A 176 177 178 178A 178B 179 179A 179B 180 180A 180B 181 182 183 185 Inner Conductor 2.44 .0960 7/0.81 SC .0320 2.44 .0960 7/0.81 SC .0320 0.48 .0189 7/0.16 CCS .0063 0.48 .0189 7/0.16 CCS .0063 3.43 .135 Helix over Magnetic Core 4.95 BC .195 0.3 .0120 7/0.1 SCCS .0040 0.3 .0120 7/0.1 SCCS .0040 0.3 .0120 7/0.1 SCCS .0040 0.3 .0120 7/0.1 SCCS .0040 0.3 .0120 7/0.1 SCCS .0040 0.3 .0120 7/0.1 SCCS .0040 0.3 .0120 7/0.1 SCCS .0040 0.3 .0120 7/0.1 SCCS .0040 0.3 .0120 7/0.1 SCCS .0040 2 Cond. 1.21 .0477 7/0.4 BC .0159 2 of 19/0.36 BC .0142 2 of 19/0.17 TC .0066 6.38 BC .2510 0.08 [.0031] Mag. Wire Helix on PE Core Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .121 50 29.4 55 250 5000 RG 225 w/One Braid 11.68 .460 .144 50 29.4 55 250 5000 RG 165 w/ Armor PVC 2.54 .100 .008 50 30.8 40 80 1500 Miniature Data Transmission 1/TC PVC-IIA 2.54 .100 .008 50 30.8 40 80 1500 Miniature Data Transmission 7.24 .285 1/Magnet Wire PVC-I 10.29 .405 .120 2240 49.0 40 80 5000 -- PE 17.27 .680 2/SC PVC-IIA 22.73 .895 .470 50 30.8 40 80 11,000 High Frequency RG 218 PTFE 0.91 .036 1/SC KEL-F 1.83 .072 .0054 50 29.4 40 150 1000 Use RG 178B PTFE 0.86 .034 1/SC KEL-F 1.83 .072 .005 50 29.4 40 150 1000 Use RG 178B PTFE 0.86 .034 1/SC FEP-IX 1.83 .072 .0054 50 29.4 55 200 1000 High Strength Cond. Available PTFE 1.45 .057 1/SC KEL-F 2.54 .100 .010 70 20.4 55 150 1200 Use RG 179B PTFE 1.6 .063 1/SC KEL-F 2.54 .100 .010 75 19.5 40 150 1200 Use RG 179B PTFE 1.6 .063 1/SC FEP-IX 2.54 .100 .010 75 19.5 55 200 1200 High Strength Cond. Available PTFE 2.62 .103 1/SC KEL-F 3.56 .140 .019 93 15.4 40 150 1500 Use RG 180B PTFE 2.59 .102 1/SC KEL-F 3.56 .140 .019 95 15.4 40 150 1500 Use RG 180B PTFE 2.59 .102 1/SC KEP-IX 3.56 .140 .019 95 15.4 55 200 1500 High Strength Cond. Available PVS-IIA 16.25 .640 .198 125 12.0 40 80 3500 Balanced Line PVC-IIA each PVC-I overall 26.8 1.055 -- 125 each 12.0 each 40 80 2300 3000 Special 4 Coaxial None 19.05 .750 .380 50 23.0 40 80 1800 See Times AM-5034S PVC-IIA 7.16 .282 -- 2000 -- 40 80 -- Delay Line Cable Dielectric Material DOD Number/Type of Shielding Braids Jacket Material PTFE 7.24 .285 1/SC FG Braid-V 10.41 .410 PTFE 7.24 .285 1/SC FG Braid-V w/Armor PE 1.52 .060 1/TC PE 1.52 .060 PE PE 4 Cores PE PS Helix Air-Space PE 2/Individual Inner Common Outer BC 2/8.43 Each Core .332 1/BC 2/3.71 Overall Shield .146 1/BC 16.05 AI. Tube .632 5.33 .210 4.78 .188 1/Magnet Wire O.D. Weight (lb/ft) 291 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 187 187A 188 188A 189 190 191 192 193 194 195 195A 196 196A 197 198 199 200 209 210 211 211A 212 213 Inner Conductor Dielectric Material 0.3 .0120 PTFE 7/0.1 SCCS .0040 0.3 .0120 PTFE 7/0.1 SCCS .0040 0.51 .0201 PTFE 7/0.17 SCCS .0067 0.51 .0201 PTFE 7/0.17 SCCS .0067 6.38 BC PS Helix .2510 1.49 .0585 Rubber H, J 7/0.3 TC .0117 12.32 TC Braid Rubber H, J, H .485 26.8 GS Tube Butyl Rubber 1.055 TC Braid 26.8 GS Tube Silicone 1.055 TC Braid Rubber 26.8 GS Tube Silicone 1.055 TC Braid Rubber 0.3 .0120 PTFE 7/0.1 SCCS .004 0.3 .0120 PTFE 7/0.1 SCCS .004 0.3 .0120 PTFE 7/0.1 SCCS .004 0.3 .0120 PTFE 7/0.1 SCCS .004 7.62 BC PS Helix .300 2.9 BC PS Helix .1140 5.31 BC PS Helix .209 OD-10.29 .405 ID-7.65 BC Tube PS Helix .301 4.8 .189 Air-Space 19/0.96 SC PTFE .0378 0.64 SCCS Air-Space .0253 PTFE 4.83 BC PTFE .1900 4.83 BC PTFE .1900 1.44 SC PE .0556 2.26 .0888 PE 7/0.75 BC .0296 Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .010 75 19.5 55 250 1200 Use RG 179B 2.67 .105 .010 75 19.5 55 250 1200 Use RG 179B PTFE 2.67 .105 .011 50 29.4 55 250 1200 Use RG 316 1/SC PTFE 2.67 .105 .011 50 29.4 55 250 1200 Use RG 316 16.05 .632 2/SC PE-IIIA 22.23 .875 .570 50 23.0 55 80 3500 Use RG 389 9.65 .380 3/TC, GS, TC Neoprene VIII 17.78 .700 .353 50 50.0 55 80 15,000 -- 27.05 1.065 Neoprene VIII 25 85.0 55 80 15,000 -- -- -- Rubber w/ Al. Armor 37.08 1.460 55.88 2.200 53.34 2.100 49.4 1.945 1.469 -- 3/TC, GS, GS 3/TC, GS, GS 3/TC, GS, GS 3/TC, GS, GS 2.59 .102 1/SC PTFE 2.59 .102 1/SC 0.86 .034 DOD Number/Type of Shielding Braids Jacket Material 1.52 .060 1/SC PTFE 2.67 .105 1.52 .060 1/SC PTFE 1.52 .060 1/SC 1.52 .060 O.D. Weight (lb/ft) -- 12.5 175.0 55 80 -- 12.5 159.0 55 80 -- 12.5 159.0 55 80 15,000 Peak 30,000 Peak 30,000 Peak 3.68 .145 .020 95 15.4 55 250 1500 Use RG 180B PTFE 3.68 .145 .020 95 15.4 55 250 1500 Use RG 180B 1/SC PTFE 1.83 .072 .006 50 29.4 55 250 1000 Use RG 178B 0.86 .034 1/SC PTFE 1.83 .072 .006 50 29.4 55 250 1000 Use RG 178B 19.25 .758 10.69 .421 19.25 .758 22.23 [.875] OD Al. Tube 12.7 [.500] OD Al. Tube 22.23 [.875] OD Al. Tube None .500 50 22.0 55 80 .155 70 16.0 55 80 .435 70 16.0 55 80 2400 Peak 1300 Peak 2400 Peak -- PE 22.23 .875 15.24 .600 25.78 1.015 PE 44.83 1.765 .900 70 16.0 55 80 4600 Peak -- -- -- 37.39 41.28 [1.625] 1.472 OD Al. Tube Rubber Rubber PE -- -- -- 12.7 .500 2/SC SR and Polyester-IV 18.42 .725 .432 50 25.0 55 150 3200 Low Loss RG 211A 3.71 .146 15.75 .620 15.75 .620 4.7 .185 1/SC FG Braid-V .040 93 13.5 55 250 750 1/BC FG Braid-V .641 50 29.4 55 250 7000 1/BC FG Braid-V .641 50 29.4 55 250 7000 2/SC PVC-IIA 6.15 .242 18.54 .730 18.54 .730 8.43 .332 .083 50 29.4 40 80 3000 High Temp. Low Capacitance High Temp. High Power High Temp. High Power Use up to 10,000 MHz 7.24 .285 1/BC PVC-IIA 10.29 .405 .099 50 30.8 40 80 5000 Use up to 1000 MHz 292 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 228A 229 230 231 232 233 234 235 Inner Conductor 2.26 .0888 7/0.75 SC .0296 2.26 .0888 7/0.75 .0296 1.21 .0477 7/0.75 BC .0159 2.7 BC .106 4.95 BC .195 4.95 BC .195 6.6 BC .260 6.6 BC .260 1.41 .0556 High Res. Wire 0.89 SC .035 2.609 BC .106 2.38 .0936 7/0.79 SC .0312 3.23 .1270 19/0.65 SC .0254 2.38 .0936 7/0.79 SC .0312 4.83 BC .1900 4.83 BC .1900 2.44 .0960 7/0.81 SC .032 5.05 .1988 37/0.72 TC .0284 OD-4.11 .162 ID-2.84 BC .112 7.62 BC .300 OD-15.01 BC .591 ID-12.22 .481 OD-29.39 BC 1.570 ID-25.78 1.015 2.16 .0852 7/0.72 .0284 Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .126 50 30.8 40 80 5000 Use up to 10,000 MHz 11.76 .463 .121 50 30.8 40 80 5000 Armored RG 213 PVC-IIA 10.8 .425 .114 75 20.6 40 80 5000 Use up to 1000 MHz PVC-IIA .201 50 30.8 40 80 7000 .460 50 30.8 40 80 11,000 .585 50 30.8 40 80 11,000 .740 50 30.8 40 80 14,000 .925 50 30.8 40 80 14,000 Use up to 1000 MHz Use up to 1000 MHz Armored RG 218 Use up to 1000 MHz Armored RG 220 Dielectric Material DOD Number/Type of Shielding Braids Jacket Material PE 7.24 .285 2/SC PVC-IIA 10.0 .425 PE 7.24 .285 1/BC PVC-IIA w/Armor PE 7.24 .285 2/BC PE 2/BC PE 9.4 .370 17.27 .680 17.27 .680 23.11 .910 23.11 .910 PE PE O.D. Weight (lb/ft) 1/BC PVC-IIA 1/BC PVC-IIA w/Armor 13.84 .545 22.1 .870 23.57 .928 28.45 1.120 29.92 1.178 4.7 .185 2/SC PVC-IIA 8.43 .332 .087 50 30.8 40 80 3000 High Attenuation 2/SC PVC-IIA 50 30.8 40 80 1900 2/BC PVC-IIA w/Armor 5.36 .211 15.32 .603 .034 PE 2.95 .116 9.4 .370 .310 50 30.8 40 80 7000 Use up to 10,000 MHz Armored RG 217 PTFE 7.24 .285 2/SC FG Braid-V 10.92 .430 .180 50 29.4 55 250 5000 See RG 393 for FEP Jacket Taped PTFE 9.4 .370 2/SC FG Braid-V 12.7 .500 .445 50 29.4 55 250 7000 -- PTFE 7.24 .285 2/SC FG Braid-V w/Armor 12.40 .488 .198 50 29.4 55 250 5000 Armored RG 225 PTFE 1/BC 20.02 .788 20.02 .788 50 29.4 55 250 7000 1/BC FG Braid-V w/Armor FG Braid-V w/Armor .682 PTFE 15.75 .620 15.75 .620 .682 50 29.4 55 250 7000 Armored RG 211 Armored RG 211A PTFE 7.24 .285 1/SC FG Braid-V w/Armor 11.68 .460 .144 50 29.4 55 250 5000 Use RG 166 Rubber-D 11.56 .455 3/TC, GS, GS Rubber-IV 18.8 .740 -- 25 100.0 40 80 15,000 -- Foam PE 11.43 .450 12.7 .500 OD Al. Tube None 12.7 .500 .118 50 25.0 55 80 5000 Peak RG 331 for Jacketed Cable PE Helix 19.25 .758 22.23 .875 OD Al. Tube PE-IIIA 28.07 1.015 .570 50 22.0 50 80 2400 Peak -- PS Helix 37.39 1.472 41.28 1.625 OD Al. Tube PE-IIIA 44.83 1.765 1.050 50 22.0 55 80 4700 Peak -- PS Helix 70.49 2.775 79.38 3.125 OD Al. Tube PE-IIIA 83.69 3.295 3.110 50 22.0 55 80 8700 Peak -- Taped PTFE 5.72 .255 2/SC SIL/DAC VI 11.43 .450 .160 50 29.5 55 250 5000 RG 115A 235 w/VI Jacket PE PE PE 1/BC PVC-IIA 1/BC PVC-IIA w/Armor 293 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 263 264 .165 50 24.0 55 80 .195 50 24.0 55 80 -- -- 12.7 .500 15.24 .600 -- -- -- -- -- -- -- -- -- -- Max. Operating Voltage (Volts RMS) 1300 Peak 1300 Peak -- -- 41.28 1.625 OD Al. Tube None 41.28 1.625 .930 50 22.0 55 80 4700 -- -- -- -- -- -- -- -- -- -- Use RG 233 72.39 2.850 79.38 3.125 OD Al. Tube None 79.3 3.125 2.700 50 22.0 55 80 8700 Peak -- -- 10.69 .421 10.69 .421 19.25 .758 19.25 .758 -- 12.7 [.500] OD Al. Tube 12.7 [.500] OD Al. Tube 22.23 [.875] OD Al. Tube 22.23 [.875] OD Al. Tube -- Use RG 234 PE-IIIA -- 12.7 .500 15.24 .600 22.23 .875 25.78 1.015 37.39 1.472 41.28 1.625 OD Al. Tube None 37.39 1.472 41.28 1.625 72.39 2.850 Dielectric Material DOD Number/Type of Shielding Braids Jacket Material 4.11 BC PS Helix .1620 4.11 BC PS Helix .1620 -- -- -- -- OD-15.01 BC .591 PS Helix ID-12.22 BC .481 -- -- OD-29.39 1.157 PS Helix ID-25.78 1.0150 -- -- 2.59 BC PS Helix .102 2.59 BC PS Helix .102 4.78 BC PS Helix .1880 4.78 BC PS Helix .1880 OD-9.5 BC .3740 PS Helix ID-6.96 27.40 OD-9.5 BC .3740 PS Helix ID-6.96 27.40 18.59 BC .732 PS Helix 16.05 .632 18.59 BC .732 PS Helix 16.05 .632 4.24 BC PE Tubes .1670 4.24 BC PE Tubes .1670 7.9 BC PE Tubes .3110 7.9 BC PE Tubes .3110 OD-7.9 SC .3110 PTFE Tubes ID-6.48 .2550 OD-15.39 .6060 PS Tubes ID-1.23 BC .4860 OD-15.39 .6060 ID-1.23 BC Tube PS Tubes .4860 2.92 BC Tube PTFE Tubes .1150 2.92 BC Tube PE Tubes .1150 4.37 BC Air-Space .1720 PTFE 4 Cond. 19/0.36 .0142 PE 2 TC, 2 BC 10.69 .421 10.69 .421 -- -- 12.7 [.500] OD Al. Tube 12.7 [.500] OD Al. Tube -- -- None PE-IIIA 36.07 1.420 Inner Conductor O.D. Weight (lb/ft) Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Comments -- -- Use RG 197/U Use RG 232/U -- -- -- -- .118 75 15.5 55 80 .148 75 15.5 55 80 .348 75 15.2 55 80 .418 75 15.2 55 80 -- 1200 Peak 1200 Peak 2200 Peak 2200 Peak 41.28 1.625 .948 75 15.0 55 80 4300 Peak -- PE-IIIA 44.83 1.765 1.068 75 15.0 55 80 4300 Peak -- 79.38 3.125 OD Al. Tube None 79.38 3.125 2.395 75 15.0 55 80 8500 Peak -- 72.39 2.850 79.38 3.125 OD Al. Tube PE-IIIA 32.95 2.805 .175 75 15.0 55 80 8500 Peak -- 11.58 .456 11.58 .456 21.16 .833 21.16 .833 13.46 [.530] OD Al. Tube 13.46 [.530] OD Al. Tube 24.21 [.953] OD Al. Tube 24.21 [.953] OD Al. Tube None .225 50 24.0 55 80 1000 -- .655 50 24.0 55 80 1000 -- .555 50 24.0 55 80 1860 -- None 13.46 .530 16.64 .655 27.94 1.100 24.21 .953 .550 50 24.0 55 80 1860 -- 21.16 .833 24.21 .953 OD Al. Tube None 24.21 .953 1.200 50 24.0 55 80 1860 -- 41.2 1.622 45.36 1.786 OD Al. Tube None 45.36 1.786 1.380 50 24.0 55 80 3640 -- 41.2 1.622 45.36 1.786 OD Al. Tube PE 48.92 1.926 .100 50 24.0 55 80 3640 -- 8.08 .318 8.08 .318 10.69 .421 4.47 .176 e/core 9.91 [.390] OD Al. Tube 9.91 [.390] OD Al. Tube None .140 50 24.0 55 80 697 -- .170 50 24.0 55 80 697 -- .336 50 21.5 40 250 1300 Peak -- .327 36.8 41.0 40 80 2000 Use RG 264C None PE-IIIA None PE PE Al. Tube None 9.91 .390 11.43 .450 12.7 .500 2 TC, 2 BC BC Overall PVC-IIA 19.05 .750 PE-IIIA -- -- -- -- 294 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) RG/U Type Cable Inner Conductor DOD Number/Type of Shielding Braids Jacket Material O.D. Weight (lb/ft) Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments 267 9.02 BC Tube .3550 PS Helix 268 4.09 BC .1610 ID-7.29 .2870 OD-9.09 BC .3580 Tube OD-7.29 .2870 ID-9.09 BC .3580 Tube ID-14.94 .5880 OD-17.48 BC .6880 Tube ID-14.94 .5880 OD-17.48 BC .6880 Tube 0.64 .0250 19/0.13 SCCS .0050 2.91 BC .1144 4.8 .1890 19/0.96 SC .0378 0.64 SC .0253 1.49 .0585 19/0.3 SC .0117 5.59 BC .220 2.9 BC .1140 OD-10.92 .4300 ID-9.14 BC .3600 Tube 5 BC .1970 OD-8.46 .3330 ID-5.64 BC .2221 Tube OD-20.83 .8200 ID-18.8 CCS .7400 Tube 10.92 BC Tube .4300 2.69 BC .106 PE Helix 4.47 2 TC, 2 BC .176 BC Overall e/core 4.72 2 TC, 2 BC .186 BC Overall e/core 40.08 Copper Clad 1.578 Mild Steel Tube 75 Spiral 7.24 Wound Cond. .285 68 BC & 7 are Insulated Copper Clad -- Mild Steel Cor. Tubing 8.89 Corrugated .350 BC Tube PE Helix 20.19 .795 Corrugated BC Tube None 23.53 1.005 .430 50 22.2 55 80 44 KW Peak -- PE Helix 20.19 .795 Corrugated BC Tube None 23.53 1.005 .875 50 22.2 55 80 44 KW Peak -- PE Helix 40.08 1.578 Corrugated BC Tube None 46.48 1.830 .875 50 22.3 55 80 145 KW Peak -- PE Helix 40.08 1.578 Corrugated BC Tube None 46.48 1.830 .125 50 22.3 55 80 145 KW Peak -- Air-space PTFE 2.79 .110 1/SC FG Braid-V 3.68 .145 .200 75 19.5 55 250 Extra Flex. High Temp. Cable Extra Flex. High Temp. Cable Taped PTFE 8.31 .327 2/SC FEP-IX 11.89 .468 .400 50 25.4 55 200 3000 Low Loss High Frequency Taped PTFE 12.7 .500 2/SC Sil./DAC-VI 19.05 .750 .031 50 25.4 55 150 4000 Low Loss High Power Irradiated PE 2.51 .099 2/SC FEP 5.08 .200 .145 54.5 28.2 40 150 4500 -- Rubber-D 7.31 .288 2/SC Sil. 12.07 .475 .410 46 50.0 55 150 8000 -- PE Helix Corrugated BC Tube Corrugated BC Tube None 75 15.0 55 80 29 KW -- None 25.53 1.005 25.53 1.005 .430 PTFE Helix 20.19 .795 20.19 .795 .720 100 13.0 55 200 22 KW Peak -- PE Helix 39.88 1.570 Corrugated BC Tube None 46.48 1.830 .750 75 15.1 55 80 100 KW Peak -- PE Helix 39.88 1.570 Corrugated BC Tube None 46.48 1.830 3.000 100 13.5 55 80 73 KW Peak -- PE Helix 75.18 2.960 95.25 CCS 3.750 None 95.25 3.750 3.000 50 21.6 40 80 440 KW Peak -- PE Helix 75.18 2.960 95.25 CCS 3.750 None 95.25 3.750 1.040 75 14.7 40 80 290 KW Peak -- PE Helix 39.88 46.48 [1.8300] PE and 1.570 Corr. BC Tube Flooding Comp. 9.53 1/SC PE-IIIA .375 50.8 2.000 13.84 .545 .160 75 15.1 55 80 100 KW Peak -- .160 50 30.8 55 80 7000 Use RG 293A 264A 264C 265 266 269 269A 270 270A 279 280 281 282 283 284A 285A 286 287 288 289 292 293 4 Cond. 19/0.36 .0142 2 TC, 2 BC 4 Cond. 1.73 .068 2 BC, 2 TC 17.2 BC Tube .6770 0.29 Cond. Over .0113 3.66 Mag. Core .144 Dielectric Material PE PE PE Helix PE PE PUR 19.05 .750 .327 36.8 41.0 40 80 2000 Use RG 264C PUR 19.43 .765 -- 40 38.4 40 80 2000 Watertight 4 Coax. PE-IIIA 52.58 2.070 .120 50 22.3 40 80 145 KW Peak -- PVC-I 10.16 .400 -- 1530 53.0 40 80 5000 DC Delay Line Cable 50 ns/ft PE-IIIA 30.23 1.190 .234 50 22.2 40 80 44 KW Peak -- None 12.65 .498 .430 50 23.0 55 80 10 KW Peak -- 295 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .205 50 30.8 55 80 7000 Watertight RG 217 16 .630 .205 95 16.3 55 80 3000 Use RG 294A PE-IIIA 16 .630 .420 95 16.3 55 80 3000 Watertight RG 130 1/SC PE-IIIA 22.73 .895 -- 50 30.8 55 80 11,000 Watertight RG 218 23.01 .906 1/SC Neoprene 30.23 1.190 -- 50 36.4 55 80 13,800 -- PFTE Helix 20.19 .795 Corrugated BC Tube None 25.53 1.005 .090 50 21.4 55 200 44 KW Peak -- PE 2.92 .115 None Foam PE 16.51 .650 .056 -- -- 55 80 -- Buoyant Per MIL-C-22667 PTFE 4.7 .185 1/HR FEP-IX 6.23 .245 .031 50 29.4 55 200 3000 FEP Jacketed RG 126 PTFE 1/SC FEP-IX 75 19.5 55 200 2300 1/SC FEP-IX .088 50 29.4 55 200 1900 2/SC FEP-IX 5.11 .201 4.32 .170 7.11 .280 .030 PTFE 3.71 .146 2.95 .116 4.7 .185 -- 50 29.4 55 200 300 FEP Jacketed RG 140 FEP Jacketed RG 141A FEP Jacketed RG 143A FEP 39.88 46.48 BC Tube 1.570 1.830 PE-IIIA 50.55 1.990 .545 75 14.4 55 80 2720 -- Foam PE 20.35 22.23 AI. Tube .801 .8750 PE-IIIA 25.78 1.015 .070 75 16.5 55 80 5700 Per MIL-C-23806 Foam PE 3.71 .146 2/SC PUR Interlayer PE-IIIA 6.86 .270 .070 75 16.7 55 80 1000 Triax Use to 100 MHz Foam PE 3.71 .146 2/SC PUR Interlayer PE-IIIA 6.86 .270 .060 75 16.7 55 80 1000 Triax Use to 100 MHz PTFE 1.52 .060 1/SC FEDP-IX 2.59 .102 .012 50 29.4 55 200 1200 FEP Jacketed RG 188A FEP 11.33 .446 1/TC Neoprene 18.03 .710 -- 95 15.4 55 80 10,000 Water Blocked RG/U Type Cable Inner Conductor Dielectric Material DOD Number/Type of Shielding Braids Jacket Material 293A 2.69 BC .106 2 Cond. 2.05 .0808 1 BC, 1 TC 2 Cond. 2.05 .0808 1 BC, 1 TC 4.95 BC .1950 5.97 .2352 37/0.85 SC .0336 OD-9.02 .3550 ID-7.29 BC .2870 Tube 15.32 .6030 7/0.51 CCS .0201 1.55 .0609 7/0.52 HR .0203 0.64 SCCS .0250 0.99 SCCS .0390 1.5 SCCS .0590 OD-10.92 .4300 ID-9.14 .3600 Tube 4.39 BC .1730 0.74 .0290 19/0.15 SC .0058 0.74 .0290 19/0.15 SC .0058 0.51 .0201 7/0.17 SCCS .0067 2 Cond. 2.21 .0870 7/0.74 BC .0290 OD-9.09 BC .3580 Tube ID-7.29 .2870 OD-17.48 BC .6880 Tube ID-14.94 .5580 OD-28.96 1.1400 Corr. BC Tube OD-28.96 1.1400 Corr. BC Tube PE 9.4 .370 1/SC PE-IIIA 13.84 .545 PE 11.99 .472 1/TC PE-IIIA PE 11.99 .472 1/SC PE 17.27 .680 Silicone Rubber 294 294A 295 296 297 298 301 302 303 304 305 306A 307 307A 316 317 318 319 321 322 PTFE O.D. Weight (lb/ft) PE Helix 25.53 20.19 .795 Corr.1.005 BC Tube PE-IIIA 28.58 1.125 .530 50 22.0 55 80 44 KW Peak -- PE Helix 46.48 39.88 1.570 Corr.1.830 BC Tube PE-IIIA 50.8 2.000 1.040 50 22.0 55 80 145 KW Peak -- None 72.39 2.850 1.210 50 21.7 55 80 320 KW Peak -- PE & Flood Comp. 77.22 3.040 1.780 50 21.7 55 80 320 KW Peak -- PE Helix -- PE Helix -- 79.39 2.850 Corr. BC Tube 79.39 2.850 Corr. BC Tube 296 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) Comments .420 50 25.6 55 80 1480 -- 24.89 .980 .320 50 25.6 55 80 1480 -- PUR 8.89 .350 .10 50 26.3 55 80 750 Low Loss 2/SC Strip Braids PUR 17.7 .697 .24 50 26.3 55 80 1700 Low Loss 21.34 .840 2/SC Strip Braids PUR 25.65 1.010 .55 50 26.3 55 80 2500 Low Loss Rubber H.J.H. 27.05 1.065 3/TC, GS, TC Neoprene 37.08 1.460 1.469 25 85.0 55 80 20,000 -- Rubber H.J.H. 9.65 .380 3/TC, GS, TC Neoprene 17.78 .700 .353 50 50.0 55 80 15,000 -- 1/SC -- -- 50 25.0 -- -- -- .187 50 25.0 55 80 2500 Jacketed 231 Solid Conductor .466 50 25.0 55 80 4500 Per MIL-C-23806 .548 50 25.0 55 80 4500 Jacketed RG 332 .109 75 17.0 55 80 2500 Per MIL-C-23806 .143 75 17.0 55 80 2500 Jacketed RG 334 .315 75 17.0 55 80 4000 Per MIL-C-23806 PE-IIIA 6.15 .242 15.24 .600 22.23 .875 25.78 1.015 12.7 .500 15.88 .625 22.23 .875 20.95 .825 .397 50 25.0 55 80 4000 Per MIL-C-23806 PE-IIIA 15.75 .620 -- 50 62.6 55 80 4000 -- PE-IIIA 132.08 4.590 5.2000 50 21.7 55 80 830 KW Peak -- PE-IIIA .140 50 24.0 55 80 700 -- .100 50 24.0 40 80 700 -- RG/U Type Cable Inner Conductor Dielectric Material DOD 323 7.92 BC Tube .312 Foam PE -- 324 7.92 BC Tube .312 Foam PE -- PE Spline 325 326 327 328 329 2.54 .1000 19/0.51 SC Al. .0200 5.08 .2000 19/1.02 SC Al. .0400 8.13 .3200 19/1.63 SC Al. .0640 12.32 TC Braid .4850 1.49 .0585 19/0.3 TC .0117 Number/Type of Shielding Braids Jacket Material O.D. Weight (lb/ft) 24.89 .980 Corr. BC Tube 24.89 .980 Corr. BC Tube PE & Flood Comp. 26.92 1.060 None 6.6 .260 2/SC Strip Braids PE Spline 13.97 .550 PE Spline 330 SC Foam PE -- 331 Foam PE 360 4.11 BC .1620 7.11 BC .2800 7.11 BC .2800 2.49 BC .0980 2.49 BC .0980 4.39 BC .1730 6.17 BC .2430 11.43 .450 20.35 .801 20.35 .801 11.43 .450 11.43 .450 20.35 .801 17.17 .676 366 4.06 .1600 Foam PE 367 Corrugated BC Tube PE Helix 369 PE Tubes 377 2.97 BC .1170 2.97 BC .1170 0.72 BC .0285 7.92 BC Tube .3120 4.19 SC Tube .1650 378 18.11 BC Tube .7130 332 333 334 335 336 370 374 376 383 384 385 2 Cond. 1.02 .0403 2000 lb. Break 1.29 BC .0508 3.89 SC .1530 Foam PE Foam PE Foam PE Foam PE Foam PE Foam PE 12.7 Al. Tube .500 22.23 Al. Tube .8750 22.23 Al. Tube .8750 12.7 Al. Tube .500 12.7 Al. Tube .500 22.23 Al. Tube .8750 19.05 Al. Tube .7500 13.72 -- .540 Corr. BC Tube 12.7 -- .5000 Corr. BC Tube 8.08 9.91 Al. Tube .318 .390 8.08 9.91 Al. Tube .318 .390 4.06 None .160 PE-IIIA None PE-IIIA None PE-IIIA None -- Corr. Al. Tube PE-IIIA PTFE Tubes -- None PE Helix -- 13.46 Al. Tube .5300 46.48 1.830 Corr. Al. Tube 11.94 .470 9.91 .390 16.51 .650 26.92 1.060 13.36 .530 PE-IIIA 50.8 2.000 .620 50 22.1 55 80 145 KW Peak -- PE -- Foam PE 16.51 .650 -- 100 -- 55 80 -- Exper. Buoyant Twisted Pair Foam PE 16.51 .650 16.76 .660 -- 50 30.8 55 80 -- .178 50 25.0 55 250 1500 Buoyant Antennna 600 psig. Low Loss No Press. Req. PE Tubes PE Foam PE PE Semi-Solid PTFE None 1/Flat BC Braid Waterproofed 10.8 12.7 Corr. Al. .425 .500 -- None Foam PE Optional .097 -- -- 55 80 -- Buoyant Antennna .390 50 26.0 55 80 6000 -- .170 50 24.0 55 250 1000 -- 297 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix D - Typical Coaxial Cable Specifications (Continued) Nom. Imped. (Ohms) Nom. Cap pf/ft Max. Operating Temp. (C) Max. Operating Voltage (Volts RMS) -- -- -- 55 80 -- -- 50 30.8 55 80 -- .336 50 22.8 55 80 2000 Buoyant Antennna 400 lb. Break Watertight See RG 14A Low Loss Replaces RG 189 10.29 .405 .092 72 -- 55 80 5000 Low Noise Cable PVC-IIA w/Armor 12.07 .475 .114 72 -- 55 80 5000 Armored RG 391 2/SC FEP-IX 9.91 .390 .165 50 29.4 55 200 5000 Moistureproof RG 225 6.86 .270 2/SC FEP-IX 8.89 .350 .125 50 28.0 55 200 2000 Low Loss RG 393 PTFE 2.95 .116 2/SC FEP-IX 4.95 .195 .050 50 29.3 55 200 1900 -- 1.64 SPC .0645 PTFE 5.46 .215 None 6.35 .250 .081 50 29.3 40 125 3000 Semirigid 0.91 SCCS .0360 PTFE 3.02 .119 6.35 OD .250 Copper Tube 3.58 OD .141 Copper Tube None 3.58 .141 .032 50 29.3 40 125 2500 Semirigid PTFE 0.86 .034 2/SC FEP Interlayer FEP-IX 2.95 .116 .0075 50 29.3 55 200 2500 Triaxial RG 178B PTFE and Cond. PTFE 0.86 .034 1/SC FEP-IX 1.83 .072 .0054 50 31.5 Max. 55 200 2000 Low Loss RG 178B PTFE 1.68 .066 2.18 OD .086 Copper Tube None 2.19 .0865 .015 50 29.4 40 125 1500 Semirigid RG/U Type Cable Inner Conductor Dielectric Material DOD 386 1.29 CCS .0508 PE -- 388 CS PE 389 6.35 BC Al. .2500 1.22 .048 7/0.4 TC .0159 1.22 .048 7/0.4 TC .0159 2.38 .0936 7/0.79 SC .0312 2.44 .096 7/0.81 SC .032 0.98 .0385 19/0.2 SPC .0077 401 402 391 392 393 397 400 403 404 405 0.3 SCCS .012 7/0.1 .004 0.3 SCCS .012 7/0.1 .004 0.51 SCCS .0201 Number/Type of Shielding Braids Jacket Material O.D. Weight (lb/ft) Foam PE -- None Non-hosing 11.28 .444 Max. SC PE Spline 16.13 .635 2/SC PE-IIIA 16.51 .650 13.84 .545 22.23 .875 Cond. PE and PE 7.24 .285 1/TC PVC-IIA Cond. PE and PE 7.24 .285 1/TC PTFE 7.24 .285 Air-space PTFE PE-IIIA Comments 298 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix E - Maximum Power Handling Capabilities for Cables (Average Input Power in Watts) RG/U Type Cable 5, 5A, 5B 8, 8A, 10A, 213, 215 9, 9A, 9B, 214 11, 11A, 12, 12A, 13, 13A, 216 217 22, 22B 55, 55A, 55B, 223 58, 58B 58A, 58C 59, 59A, 59B 62, 62A, 71, 71A, 71B 62B 115, 115A, 165, 225, 393 108, 108A 122 140, 141, 141A, 142, 142B, 302, 303, 400, 402 143, 143A 144 161, 179, 179A, 179B, 187, 187A 174, 174A 178, 178A, 178B, 196, 196A 180, 180A, 180B, 195, 195A 188, 188A, 316 210 10 2,000 3,700 3,700 2,500 6,000 1,700 800 730 650 1,300 1,300 1,150 25,000 340 540 9,000 11,500 25,000 1,600 170 710 2,500 1,250 8,500 50 800 1,300 1,300 1,000 2,000 650 310 280 225 480 480 420 9,500 145 205 3,500 4,600 9,500 780 72 340 1,100 600 3,300 100 550 850 850 650 1,200 430 205 180 170 310 310 280 6,300 100 140 2,400 3,200 6,300 570 50 240 800 450 2,300 200 350 540 540 400 800 280 137 125 110 200 200 180 4,300 70 90 1,600 2,100 4,300 420 36 170 570 330 1,600 Frequency in MHz 400 230 350 350 260 480 190 90 85 75 135 135 120 2,800 50 60 1,100 1,450 2,800 310 25 123 400 240 1,100 1,000 125 190 190 150 260 110 53 50 44 77 77 69 1,700 30 35 650 850 1,700 200 16 78 250 160 620 3,000 60 95 95 70 120 50 28 25 22 40 40 35 880 15 18 350 460 880 110 -- 41 135 80 310 5,000 40 65 65 50 85 38 20 17 15 27 27 25 620 -- 12 245 330 620 76 -- 28 93 57 220 10,000 22 37 37 26 50 20 10 -- -- 15 15 14 350 -- -- 140 190 350 41 -- 14 50 30 140 Note: Values above 3 GHz vary considerably depending on construction. Conditions Ambient: 40C Altitude: Sea level Center Conductor Temperature: 80C for polyethylene 200C for PTFE 299 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix F - Nominal Loss Characteristics for Cables (Decibels per Hundred Feet) RG/U Type Cable 5, 5A, 5B 8, 8A, 10A, 213, 215 9, 9A, 9B, 214 11, 11A, 12, 12A, 13, 13A, 216 217 22, 22B 55, 55A, 55B, 223 58, 58B 58A, 58C 59, 59A, 59B 62, 62A, 71, 71A, 71B 62B 115, 115A, 165, 225, 393 108, 108A 122 140, 141, 141A, 142, 142B, 302, 303, 400, 402 143, 143A 144 161, 179, 179A, 179B, 187, 187A 174, 174A 178, 178A, 178B, 196, 196A 180, 180A, 180B, 195, 195A 188, 188A, 316 210 10 .80 .66 .66 .66 .41 1.20 1.35 1.20 1.40 1.10 .90 .90 .60 2.30 1.60 1.20 .85 .38 5.00 3.80 5.30 3.10 3.80 .23 50 1.40 1.50 1.50 1.50 1.00 2.80 3.00 3.10 3.30 2.30 1.90 2.10 1.40 5.20 4.40 2.70 1.80 1.00 7.90 6.50 10.00 4.20 7.90 .58 100 2.90 2.20 2.20 2.20 1.40 4.20 4.30 4.60 4.90 3.30 2.80 3.00 2.10 7.50 6.90 3.90 2.50 1.60 9.80 8.90 13.30 5.10 11.50 .85 200 4.30 3.20 3.20 3.20 2.10 6.30 6.00 7.00 7.30 4.70 3.70 4.30 3.10 11.00 11.00 5.50 3.80 2.30 12.70 12.00 20.00 7.30 15.00 1.30 Frequency in MHz 400 6.40 4.60 4.60 4.60 3.10 9.50 8.80 10.00 11.00 6.70 5.20 6.10 4.50 16.00 16.60 8.00 5.70 3.80 15.80 17.50 27.50 10.40 20.00 1.90 1,000 11.00 9.00 9.00 9.00 5.80 -- 16.50 17.50 20.00 11.50 8.50 10.50 7.50 26.20 29.20 13.00 9.70 7.00 25.00 31.00 45.00 16.50 30.00 3.10 3,000 22.00 19.00 19.00 19.00 13.00 -- 36.00 38.00 41.00 25.50 18.40 23.50 14.00 54.00 57.20 26.00 18.10 15.10 43.00 64.30 78.00 36.00 58.00 6.50 5,000 30.00 28.00 28.00 28.00 19.00 -- 51.00 -- -- 41.00 29.50 36.00 21.00 -- 89.00 36.00 26.10 -- 62.50 97.00 115.00 49.50 79.00 9.00 10,000 52.00 47.00 47.00 -- 31.00 -- 85.00 -- -- -- -- -- 35.00 -- -- 62.00 40.70 -- 135.00 185.00 172.00 89.00 133.00 15.00 Note: Values above 3 GHz vary considerably depending on construction. Conditions Ambient: 20C 300 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix G - Glossary of Terms A ambient The atmospheric conditions surrounding a given item. Normally in terms of factors which influence or modify, such as temperature, humidity, etc. amplitude The magnitude of variation in a changing quantity from its zero value. The word requires modification - as with adjectives such as peak, maximum, rms, etc. - to designate the specific amplitude in question. arc voltage voltage that continues to pass through a surge protector during activation of GDT(approx. 20 volts ) attenuation A reduction in power. It occurs naturally during wave travel through lines, waveguides, space or a medium such as water. It may be produced intentionally by placing an attenuator in a circuit. The amount of attenuation is generally expressed in decibels per unit of length. B back mounted A connector attached to the inside of a panel or box with its mounting flanges inside the equipment. bayonet coupling A quick coupling device for plug and receptacle connectors. Pins projecting from the outside of the cylindrical receptacle engage with corresponding cam slots in the bayonet plug. bellmouth Flared at the mouth. The rear of a properly crimped wire barrel will have a slight flare (bellmouth) to relieve the strain on the wire strands as they leave the area of high compression and take their natural "lay". A bellmouth condition may also be present in front of the wire barrel. black box A term used to refer to any assembly or subassembly, usually electronic, that can readily be installed or removed from a larger system. BNC Connector A radio frequency connector covered by Military Specification. It has an impedance of 50 or 75 ohms, and is designed to operate in the 0 to 4 GHz frequency range. It features quick connect/disconnect by pin and cam bayonet coupling. body Main or largest portion of a connector to which other portions are attached. braid A weave of metal fibers used as a shield covering for an insulated conductor or group of insulated conductors. When flattened it may be used as a grounding strap. broad-band E Interference generated over a wide range of frequencies (e.g., automotive ignition noise). bulkhead A term used to define a mounting style of connectors. Bulkhead connectors are designed to be inserted into a panel cutout from the rear (component side) of the panel. C cable Either a standard conductor, with or without insulation and other coverings, or a combination of conductors insulated from each other. cable assembly A completed cable and its associated hardware. capacitance The property of an electrical conductor (dielectric in a capacitor) that permits the storage of energy as a result of electrical displacement. The basic unit of capacitance is the farad, however, measurement is more commonly in microfarads or picofarads. cavity A metallic enclosure in some types of tubes and circuits within which resonant fields may be excited at the microwave frequency to which the cavity is tuned. Usually referred to as resonant cavity. See also: contact cavity. characteristic impedance The ratio of voltage to current at any point along a transmission line on which there are no standing waves. circular mil area (CMA) A unit of area equal to the area of a circle whose diameter is 1 mil (0.001 inch). Used chiefly in specifying crosssectional areas of conductors. (See Tyco Electronics Brochure No. 4402-8, Computing Circular Mil Area for Tyco Electronics Terminals and Splices). closed entry contact A female contact designed to prevent the entry of a pin or probing device having a cross-sectional dimension (diameter) greater than the mating pin. coaxial cable A transmission line consisting of two conductors concentric with and insulated from each other. In its flexible form it consists of either a solid or stranded center conductor surrounded by a dielectric. A braid is then woven over the dielectric to form an outer conductor. A weatherproof plastic covering, usually vinyl, is placed on top of the braid. connector A coupling device employed to connect conductors to one circuit with those of another circuit. Used to provide rapid connect/disconnect mating with pc boards, posts or another connector. connector assembly Includes housing and contact plus additional components such as hardware used to hold the assembly together and/or make the assembly a functional connector. contact An electrically conductive component designed for use in a multicircuit connector. contact cavity A defined hole in the connector insert or housing into which the contact must fit. See also: cavity. contact durability The number of insertion and withdrawal cycles that a connector must be capable of withstanding while remaining within the performance levels of the applicable specification. contact engaging and separating force Force required to either engage or separate contacts. Values are generally established for maximum and minimum forces. contact inspection hole A hole, perpendicular to the cylindrical rear portion of screw machined contacts, used to check the depth to which wire has been inserted into the barrel. contact resistance Measurement of electrical resistance of mated contacts when assembled in a connector under typical service use. Electrical resistance is determined by measuring from the rear of the electrical area of one contact to the rear of the contact area of the mating contact (excluding both crimps) while carrying a specified test current. contact shoulder The flanged or enlarged portion of a contact that prevents it from being over-inserted into the appropriate contact cavity. The shoulder may also contribute to proper orientation and stability with the connector housing. contact, two-piece A contact made of two separate parts joined by swedging, brazing or other means of fastening to form a single contact. While this provides the mechanical advantages of two metals, it also has the inherent electrical disadvantage of difference in conductivity. corona A discharge of electricity appearing as a bluish-purple glow on the surface of, and adjacent to, a conductor when the voltage gradient exceeds a certain critical value. It is caused by the ionization of surrounding air by high voltage. crimp The final configuration of a terminal barrel after the necessary compression forces have been applied to cause a functional union between the terminal barrel and the wire. crimp height A top to bottom measurement of the crimped barrel, using a crimp height comparator in the prescribed manner. (Refer to Tyco Electronics Instruction Sheet 7424). crimping dies A term used to identify the shaping tools that, when moved toward each other, produce a certain desirable shape to the barrel of the terminal or contact that has been placed between them. Crimping dies are often referred to as die sets or as die inserts. 301 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix G - Glossary of Terms (Continued) crimping head Tooling containing jaws and linkage for use in pneumatic or hydraulic powered units to crimp loose-piece contacts/terminals that may be too large for hand tool applications. crimping tool A term commonly used to identify a hand held mechanical device that is used to crimp a contact, terminal or splice. crosstalk A magnetic or electrostatic coupling which causes the unwanted transfer of energy from one circuit (disturbing circuit) to another circuit (disturbed circuit) current rating The maximum continuous electrical flow of current recommended for a given situation. It is expressed in amperes. cycle One complete sequence of values of an alternating quantity, including a rise to maximum in one direction and return to zero; a rise to maximum in the opposite direction and return to zero. The number of cycles occurring in one second is called the frequency. D daisy chain A cable assembly with common wires jumpering three or more connections/connectors. The term is also used as a verb, implying to connect in jumper manner. dB Abbreviation -- see decibel. D.C. sparkover voltage defined as the maximum voltage across a device before it discharges the energy to ground when subjected to a slowly rising voltage ramp. A rate of rise of 100V/s is usually chosen for testing purposes. decibel A unit expressing the ratio of two voltages, currents or powers. It is equal to 20 times the common logarithm of the ratio of two voltages across or two currents through equal loads, or 10 times the common logarithm of the two powers. One decibel is approximately the smallest change in audible power that can be recognized by the human ear. die closure Term used to designate a crimping area (crimping chamber) when the dies are fully closed or bottomed. Die closure is checked with go/no go plug gage to insure that the crimp produced by the tooling satisfies the crimp height specification. dielectric A material that serves as an insulator. The amount of resistance to voltage in a given insulation. dielectric withstanding voltage The maximum potential gradient that a dielectric material can withstand without failure. discontinuity Rated interconnection: a broken connection (open circuit) or the loss of a specified connection characteristic. Transient phenomena: Short term (temporary) interruption or unacceptable variation in current or voltage. dissipation Unusable or lost energy, such as the production of unused heat in a circuit. distortion An unwanted change or addition to a signal or waveform when it is amplified. This definition excludes noise which is an extraneous signal superimposed on the desired signal. dummy load A dissipative device used at the end of a transmission line or waveguide to convert transmitted energy into heat, so essentially no energy is radiated outward or reflected back to its source. dust cap A device attached to a connector to provide protection against dust and foreign debris. E electromagnetic compatibility (EMC) The ability of an electronic device to operate in its intended environment without its performance being affected by EMI and without generating EMI that will affect other equipment. electromagnetic interference (EMI) Unwanted electrical or electromagnetic energy that causes undesirable responses, degrading performance or complete malfunctions in electronic equipment. See also: noise. electromotive force (emf) See voltage. environmentally sealed A unit is provided with gaskets, seals, grommets, potting or other means to keep out moisture, dust, air or dirt which might reduce or impair its performance. F feedthrough A connector or terminal block, usually having double-ended terminals, which permits distribution and bussing of electrical circuits. Also used to describe a bushing in a wall or bulkhead, separating compartments at different pressure levels, with terminations on both sides. ferrule A short tube used to make solderless connections to shielded or coaxial cable. Also molded into the plastic inserts of multiple contact connectors to provide strong, wear-resistant shoulders on which contact retaining springs can bear. flange A projection extending from or around the periphery of a connector and having holes that provide for mounting the connector to a panel or to a mating connector. frequency modulation (fm) A scheme for modulating a carrier frequency in which the amplitude remains constant but the carrier frequency is displaced in frequency proportionally to the amplitude of the modulating signal. An fm broadcast is practically immune to atmospheric and manmade interference. fretting corrosion A form of excellerated oxidation that appears at the interface of contacting materials undergoing slight cyclic relative motion. All non-nobel metals (tin) are susceptible to some degree of fretting corrosion and will suffer contact resistance increases. front mounted A connector is said to be front mounted when it is attached to the outside of the mating side of a panel. A front mounted connector can only be installed or removed from the outside of the equipment. G gas discharge tube (GDT) hermetically sealed device containing an inert gas. GHz See gigahertz. giga A prefix meaning one billion (109). gigahertz (GHz) One billion cycles per second (109 cps). glow mode condition in which the GDT continues to conduct after an impulse passed. Characterized by a visible glow in the device caused by over-heating. ground A connection, intentional or accidental, between an electrical circuit and the earth or some conducting body (e.g. chassis) serving in place of earth. H heat-shrinkable A type of plastic material that has been cross-linked. A term describing tubes, sleeves, caps, boots, films or other forms of plastic which shrink to encapsulate, protect or insulate connections, splices, terminations and other configurations. hermetic Airtight, impervious to external influence, as in a hermetic package. Often used to describe metal-to-metal solder or weld-sealed packages. 302 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix G - Glossary of Terms (Continued) hermetic seal Hermetically sealed connectors are usually multiple contact connectors where the contacts are bonded to the connector by glass or other materials and permits maximum leakage rate of gas through the connector of 1.0 micron ft./hr. at one atmosphere pressure for special applications. hertz (Hz) International standard term for cycles per second. Named after the German physicist Heinrich R. Hertz (e.g., 60 cycles per second is equal to 60 hertz or 60 Hz). I impedance (Z) The total opposition offered by a component or circuit to the flow of alternating or varying current. Impedance is expressed in ohms and is similar to the actual resistance in a direct current circuit. In computations, impedance is handled as a complex ratio of voltage to current. impedance match A condition in which the impedance of a component or circuit is equal to the internal impedance of the source, or the surge impedance of a transmission line. This gives maximum transfer of energy from the source to the load, as well as minimum reflection and distortion. impulse discharge current I 1-0 is defined as the peak current of an 0-9 B impulse which the device can withstand ten times (5 of each polarity at 0-5 A fixed time intervals) without sub0-1 0 0 stantially affecting device performt T 1 T 1 = 1.25T ance. The test normally used to T 1 T determine this capacity uses the 2 8/20ms waveform as depicted below where T1=8ms and T2=20ms. V impulse sparkover voltage 1.0 8 defined as the maximum level 0.9 of voltage across a device before it 0.5 discharges the energy to ground A when subjected to a voltage impulse. 0.3 The three common waveform profiles 0 t 0 1 T T =1.67T T 2 used to determine this capacity are: T L T 2 inductance One cause of reactance. An electromagnetic phenomenon in which the expanding and collapsing of a magnetic field surrounding a conductor or device tends to impede changes in current. The effects of inductance become greater as frequencies increase. The basic unit for inductance is the henry. input impedance The impedance that exists between the input terminals of an amplifier or transmission line when the source is disconnected. The circuit, signal level and frequency must be specified. insertion loss The loss in load power due to the insertion of a component, connector or device at some point in a transmission system. Generally expressed in decibels as the ratio of the power received at the load before insertion of the apparatus, to the power received at the load after insertion. insulation crimp The area of a terminal splice or contact that has been formed around the insulation of a wire. insulation grip The ability of certain crimped terminals to hold firmly in place both the conductor and a small portion of insulation. This prevents the conductor from being exposed due to insulation receding away from the terminal. insulation resistance The electrical resistance between two conductors separated by an insulating material. interface The two surfaces of a multiple-contact connector that face each other when the connector is assembled. interference An electrical or electromagnetic disturbance that causes undesirable response in electronic equipment. J jack A connecting device into which a plug can be inserted to make circuit connections. The jack may also have contacts which open or close to perform switching functions when the plug is inserted or removed. See also: receptacle. L line impedance Impedance as measured across the terminals of a transmission line; frequently the characteristic impedance of the line. M matched impedance The coupling of two circuits in such a way that the impedance of one circuit equals the impedance of the other. mate Two join two connectors in a normal engaging mode. maximum discharge current defined as the peak current of an impulse which the device can withstand once without substantially affecting device performance. mega (M) A prefix meaning one million (106). microwave That portion of the electromagnetic spectrum lying between the far infrared and conventional radio frequency range. The microwave frequency range extends from 1 GHz to 300 GHz. Microwaves are usually used in point-to-point communications because they are easily concentrated into a beam. Military Specification Military requirements. The demand imposed upon a system to meet a military operational need. mismatch The condition in which the impedance of a source does not match or equal the impedance of the connected load. This reduces power transfer by causing reflection. N narrow-band EMI generated from a device operating at a specific and limited range of frequencies. See also: electromagnetic interference (EMI). N Connector A large radio frequency connector covered by Military Specification. It has an impedance of 50 ohms and is designed to operate in the 0 to 11 GHz frequency range. It has a threaded coupling and is physically larger than a TNC connector. noise An extraneous signal in an electrical circuit, capable of interfering with the desired signal. Classes of noise include burst of popcorn noise, intermediate frequency noise at low audio frequencies, white (thermal) noise, etc. Signals from power supply or ground line coupled into an amplifier output may be considered noise. O "O" crimp An insulation support crimp for open barrel terminals and contacts. In its crimped form it resembles an "O" and conforms to the shape of the round wire insulation. "O" crimp is also used to describe the circumferential crimps used on COAXICON ferrules. 303 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix G - Glossary of Terms (Continued) ohm The unit of measurement for electrical resistance. A circuit is said to have a resistance of one ohm when an applied emf of one volt causes a current of one ampere to flow. P panel mount A method of fixing a connector to a board, panel or frame. The mounted connector is usually the receptacle or female connector. The plug or male connector is usually the removable portion. pcb Abbreviation: see printed circuit board. permeability (chemical) The passage or diffusion (or rate of passage) of a gas, vapor, liquid or solid through a barrier without physically or chemically affecting it. permeability (magnetic) The measure of how much better a material is than air as a path for magnetic lines of force. Air is assumed to have a permeability of 1. plug In coaxial RF connectors the plug is usually the movable portion, and is usually attached to a cable or removable assembly. Plugs mate with receptacles, jacks, outlets, etc. printed circuit board An insulating board serving as a base for a printed circuit. When the printing process is completed, the board may include printed components, as well as printed wiring. propagation delay Time required for an electronic digital device, or transmission network to transfer information from its input to its output. propagation delay time The time between the application of a digital input waveform and the corresponding change in input waveform. It is measured between reference points on the waveforms. The time is generally different for positive-going and negative-going waveforms. prototype A model suitable for use in the complete evaluation of form, design and performance. pulse A change in the level, over a relatively short period of time, of a signal whose value is normally constant. pulse width The length of time that the pulse voltage is at the transient level. Electronic pulse widths are usually in the millisecond (10-3), microsecond (10-6) or nanosecond (10-9) range. R receptacle In coaxial RF connectors, the receptacle is usually the fixed or stationary portion that is mounted to the panel. In shell-type, multiplecontact connectors the receptacle usually contains the pin contacts and is mounted on the "cold" side of a circuit such as in a drawer or black box. Receptacles mate with plugs. See also: jack. residual impulse defined as the voltage that will pass through the device prior to activation of the GDT. residual voltage defined as the small amount of voltage left on the line after an impulse passes. resonance A frequency at which captive reactance and inductive reactance are equal and therefore cancel one another's effects. RF Abbreviation for radio frequency. RG/U Symbol used to designate coaxial cables that are made to Government Specification (e.g., RG 58U; in this designation the "R" means radio frequency, the "G" means Government, the "58" is the number assigned to the government approval, and the "U" means it is a universal specification). rise time The time required for a component or logic circuit to change from the quiescent to the transient state when an input is applied. (i.e. elapsed time between application of input and attainment of full output level). rms Abbreviation for root mean square. root mean square The effective value of an alternating current, corresponding to the direct current value that will produce the same heating effect. S screw machine contact A contact which is machined from solid bar stock. semi-rigid A cable containing a flexible inner core and a relatively inflexible sheathing. sheath The outer covering of a jacket over the insulated conductors to provide mechanical protection for the conductors. Also known as the external conduction surface of a shielded transmission line. shield/shielding (cable) A conducting envelope, composed of metal strands, which enclose a wire, group of wires or cable so constructed that substantially every point on the surface of the underlying insulation is at ground potential or at some predetermined potential with respect to ground. shield/shielding (circuit) The metal sleeving surrounding one or more of the conductors in a wire circuit to prevent interference, interaction or current leakage. Shielding protects a circuit against crosstalk. shock (mechanical) (1) An abrupt impact applied to a stationary object. (2) An abrupt or nonperiodic change in position, characterized by suddenness, and by the development of substantial internal forces. SHV Abbreviation for standard high voltage. sine wave A wave which can be expressed as the sine of a linear function of time, space or both. A waveform, often viewed on an oscilloscope, of a pure alternating current or voltage. skin effect The tendency of alternating currents to flow near the surface of the conductor, thus being restricted to a small part of the total cross-sectional area. This effect increases the resistance and becomes more marked as the frequency rises. sleeve The insulated or metallic covering over the barrel of a terminal. solder contact A contact or terminal having a cup, hollow cylinder, eyelet or hook to accept a wire for a conventional soldered termination. standard high voltage (SHV) A quick connect/disconnect connector series employing a bayonet lock coupling and designated to operate safely up to 5000 volts AC. It is the industry standard connector specified by the National Bureau of Standards (NBS) for high voltage use by the Atomic Energy Commission (AEC). standing-wave Distribution of current and voltage on a transmission line, resulting from two sets of waves traveling in opposite directions. standing wave ratio The ratio between maximum and minimum current or voltage along a line. It is a measure of the mismatch between the load and the line. It is equal to 1 when the line impedance is perfectly matched to the load. (In which case the maximum and minimum are the same, as current and voltage do not vary along the line). The perfect match would be a 1 to 1 ratio. super high frequency (shf) The Federal Communications Commission designation for the band from 3,000 to 30,000 MHz in the radio spectrum. T tensile The amount of axial load (longitudinal stress) required to break or pull the wire from the crimped barrel of the terminal, splice or contact. 304 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Appendix G - Glossary of Terms (Continued) tensile strength The greatest longitudinal stress that a substance or union can bear without tearing or pulling apart. In crimped terminations, it is the greatest longitudinal stress that a terminal can bear without the wire separating from the terminal. thermal shock The effect of heat or cold applied at such a rate that nonuniform thermal expansion or contraction occurs within a given material or combination materials. The effect can cause inserts and other insulation materials to pull away from metal parts. time-delay A circuit that delays the transmission of an impulse for a definite and desired period of time. TNC Connector A radio frequency connector covered by Military Specification. It has an impedance of 50 ohms and is designed to operate in a 0 to 11 GHz frequency range. Reliability is assured by a threaded coupling that can be safely wired to prevent accidental disconnect. U UG Symbol used to describe coaxial connectors that were made to a Government specification. This specification is now obsolete. ultra-high frequency (uhf) A Federal Communications Commission designation for the band from 300 to 3000 MHz on the radio spectrum. In television - channels 14 to 83 or 470 to 890 MHz. V very high frequency (vhf) A Federal Communications Commission designation for the band from 30 to 300 MHz on the radio spectrum. voice-frequency (vf) Any frequency within that part of the radio frequency range essential to speech transmission of a commercial quality (i.e., 300 to 3400 Hz). Also referred to as telephone frequency. volt (V) The unit of measurement for electromotive force (emf). It is equivalent to the force required to produce 1 ampere through a resistance of 1 ohm. voltage (E) The term most often used to designate electrical pressure that exists between two points and is capable of producing a flow of current when a closed circuit is connected between the two points. Voltage is measured in volts, millivolts, microvolts and kilovolts. The terms electromotive force (emf), potential, potential difference and voltage drop are often referred to as voltage. voltage drop The voltage developed across a component or conductor by the flow of current through the resistance or impedance of that component or conductor. voltage hold over refers to the maximum line voltage at which recovery of the GDT to its inactive state will take place within a specified period of time (normally 150ms) after an induced lightning pulse (normally 10/1000ms) has been applied. VSWR Abbreviation for voltage standing wave ratio. Also see: standing wave ratio. W wavelength The distance between two points which are in phase on adjacent waves. It is the distance traveled by the wave in the same span of one cycle. Electromagnetic waves (both light and radio) have a speed in space of about 300,000,000 meters (186,000 miles) per second. Thus wavelength in meters is equal to 300,000,000 divided by frequency. Z Z Letter symbol used to represent impedance in ohms. 305 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors RF Coaxial Solutions for Communications Equipment Wireless Base Station Carrier Rack Equipment Chassis Set Top Box NIC Card 306 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Wireless Base Station Radio base station cabinets demand packaging that combines high power r.f. signals, high speed digital data, and analog signals. Cabinet input/output connections are provided by N Series and 7/16 connectors. Plug-in r.f. modules require Blindmate, DIN inserts, and panel mount connectors. Transceiver modules utilize MCX, and SSMT board and cable connectors for board to board and panel to board applications. Finally, both semi-rigid and flexible RG cable assemblies route signals throughout the entire cabinet. 7-16 Series Connectors, Page 7 SMA Connectors Page 100 Lightning Protection Connectors, Page 12 SMB Connectors Page 176 7-16 Series Cable Assemblies, Page 269 N Series Cable Assemblies, Page 269 N Series Connectors, Page 20 MCX Connectors, Page 196 SSMT Connectors, Page 212 TNC Connectors, Page 29 SMP Subminiature Blindmate Connectors, Page 152 DIN Inserts, Page 238 COAXICON Contacts, Page 244 SIEMAX Connectors, Page 249 307 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Carrier Rack Equipment For today's fast paced Carrier Equipment market, Tyco Electronics offers a broad line of RF interconnect products that meet demanding customer requirements for CATV, telecom and data transmission applications. Connectors, cable assemblies, and applicator tooling are available for applications ranging from central office to customer premise environ- ments, 50 or 75 ohms, from rack based equipment to set top boxes. Styles range from standard miniature RF connectors such as F series, BNC and TNC to subminiature RF connectors such as SMA, SMB, SMC and Blindmate connectors, to Micro miniature MMCX, SSMT and SMT/QuickGrip products. SIEMAX connectors provide multi-positional surface mount technology RF connection for pcb and panel applications, and offer superior packaging density. Between Series adapters are available, along with connectors meeting international DIN and IEC standard interfaces. High performance GHz range BNC connectors meet the needs for faster signaling. BNC Connectors, Page 44 SMA Connectors, Page 100 G Series Connectors, Page 98 SMB Connectors, Page 176 TNC Connectors, Page 29 DIN Inserts, Page 238 SIEMAX Connectors, Page 249 F Series Connectors, Page 93 MMCX Connectors, Page 218 308 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Chassis, NIC Card and Set Top Box Coaxial interconnects have evolved in the enterprise market place over the years. The BNC interfaces that once dominated the Ethernet premise installations to coax products that provide high speed access to the carrier infrastructure. In today's environment, Network Interface Cards (NIC) still feature Capacitively Decoupled BNC connectors with builtin chip capacitors to reduce noise and ground loop currents. For the infrastructure, the standard coaxial interfaces to the infrastructure include both 50 and 75 ohm BNC connectors. The BNC family features numerous styles including cable plugs and jacks, adapters and printed circuit board connectors. To address manufacturability, we offer the board mount in SMT, wave solder, and press fit. More recently, the SMB interface is the one of choice for improved density and is available in both commercial and MIL-type. Again, our portfolio has a wide variety of configurations to address your system requirements. Lastly, as broadband CATV becomes more prevalent for internet access in cable modems, our family of F connectors offer a high performance solution. Chassis BNC Connectors, Page 44 SMB Connectors, Page 176 F Connectors, Page 93 Decoupled BNC, Page 82 Set Top Box NIC Card 309 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Non-RoHS to RoHS Compliant Part Number Cross Reference Non-RoHS RoHS Compliant Part No. Part No. 13126-1 Exempt 13127-1 Exempt 59980-1 Exempt 69477-1 Exempt 69710-1 Exempt 148385-1 5148385-1 148386-1 5148386-1 189721-1 Exempt 220015-1 Exempt 220220-2 Exempt 220221-2 Exempt 220222-2 Exempt 220224-1 Exempt 221111-1 5221111-1 221123-2 5221123-2 221128-1 5221128-1 1-221128-0 1-5221128-0 1-221128-1 1-5221128-1 1-221128-7 1-5221128-7 2-221128-1 2-5221128-1 2-221128-3 2-5221128-3 2-221128-7 2-5221128-7 3-221128-1 3-5221128-1 221162-1 5221162-1 221185-1 5221185-1 221185-2 5221185-2 221185-3 5221185-3 221185-5 5221185-5 221185-7 5221185-7 221185-8 5221185-8 221185-9 5221185-9 1-221185-0 1-5221185-0 1-221185-8 1-5221185-8 2-221185-9 2-5221185-9 3-221185-1 3-5221185-1 221198-1 5221198-1 221199-1 5221199-1 221199-2 5221199-2 221199-5 5221199-5 221221-1 5221221-1 221221-2 5221221-2 221221-5 5221221-5 221221-7 5221221-7 221244-1 5221244-1 221325-1 5221325-1 221336-3 5221336-3 221336-4 5221336-4 221402-2 5221402-2 221402-4 5221402-4 221506-2 5221506-2 221506-3 5221506-3 221506-5 5221506-5 221629-1 5221629-1 221629-2 5221629-2 221629-4 5221629-4 221629-5 5221629-5 221629-6 5221629-6 1-221629-6 1-5221629-6 221980-1 5221980-1 221981-2 5221981-2 222006-1 5222006-1 Non-RoHS RoHS Compliant Part No. Part No. 222092-1 5222092-1 222092-3 5222092-3 222093-1 5222093-1 222117-1 5222117-1 222132-1 5222132-1 222165-2 5222165-2 222420-1 5222420-1 222462-1 5222462-1 222506-1 5222506-1 222506-5 5222506-5 222506-6 5222506-6 225089-4 5225089-4 225092-8 5225092-8 225349-9 5225349-9 225361-2 5225361-2 225361-4 5225361-4 1-225361-2 1-5225661-2 225363-1 5225363-1 225392-2 5225392-2 225395-1 5225395-1 225395-2 5225395-2 225395-3 5225395-3 225395-6 5225395-6 225395-7 5225395-7 225395-8 5225395-8 1-225395-0 1-5225395-0 2-225395-0 2-5225395-0 4-225395-1 4-5225395-1 4-225395-2 4-5225395-2 225396-1 5225396-1 225396-2 5225396-2 225396-7 5225396-7 225397-1 5225397-1 225397-2 5225397-2 225397-7 5225397-7 225398-1 5225398-1 225398-3 5225398-3 225398-6 5225398-6 225398-7 5225398-7 225398-8 5225398-8 1-225398-5 1-5225398-5 225554-6 5225554-6 1-225554-1 1-5225554-1 225555-2 5225555-2 225555-6 5225555-6 225555-7 5225555-7 225555-8 5225555-8 225557-6 5225557-6 225559-2 5225559-2 225559-8 5225559-8 225661-1 5225661-1 225661-2 5225661-2 1-225661-3 1-5225661-3 1-225661-6 1-5225661-6 225662-2 5225662-2 1-225662-8 1-5225662-8 225664-1 5225664-1 225664-2 5225664-2 1-225664-2 1-5225664-2 1-225667-6 1-5225667-6 225669-1 5225669-1 Non-RoHS RoHS Compliant Part No. Part No. 225669-2 5225669-2 225699-1 5225699-1 225886-1 5225886-1 225886-4 5225886-4 225886-5 5225886-5 225886-7 5225886-7 225974-1 5225974-1 225974-2 5225974-2 225974-5 5225974-5 226978-1 5226978-1 226978-3 5226978-3 226990-1 5226990-1 226990-3 5226990-3 226990-6 5226990-6 226993-1 5226993-1 226993-2 5226993-2 226993-3 5226993-3 226993-6 5226993-6 227079-5 5227079-5 227079-6 5227079-6 227079-7 5227079-7 1-227079-1 1-5227079-1 1-227079-6 1-5227079-6 1-227079-9 1-5227079-9 2-227079-2 2-5227079-2 4-227079-3 4-5227079-3 5-227079-3 5-5227079-3 6-227079-1 6-5227079-1 6-227079-7 6-5227079-7 6-227079-8 6-5227079-8 8-227079-2 8-5227079-2 1-227086-0 1-5227086-0 227161-1 5227161-1 227161-2 5227161-2 227161-3 5227161-3 227161-6 5227161-6 227161-7 5227161-7 227161-9 5227161-9 227169-5 5227169-5 227169-7 5227169-7 227169-8 5227169-8 227222-1 5227222-1 227222-2 5227222-2 227222-3 5227222-3 227222-6 5227222-6 227426-1 5227426-1 227661-1 5227661-1 227671-1 5227671-1 227673-1 5227673-1 227676-1 5227676-1 227677-1 5227677-1 227699-1 5227699-1 227699-2 5227699-2 227699-3 5227699-3 227716-3 5227716-3 227726-1 5227726-1 227726-2 5227726-2 227726-3 5227726-3 227755-1 5227755-1 227755-2 5227755-2 227755-3 5227755-3 Non-RoHS RoHS Compliant Part No. Part No. 227764-2 5227764-2 227818-1 5227818-1 227820-1 5227820-1 227839-1 5227839-1 228217-1 5228217-1 228226-1 5228226-1 228226-3 5228226-3 228435-1 5228435-1 228596-1 5228596-1 228596-2 5228596-2 228596-3 5228596-3 228596-4 5228596-4 228596-5 5228596-5 228618-1 5228618-1 228618-2 5228618-2 228618-3 5228618-3 228618-4 5228618-4 228618-5 5228618-5 228686-1 5228686-1 228979-5 5228979-5 228979-6 5228979-6 228979-7 5228979-7 228980-5 5228980-5 228980-6 5228980-6 228980-7 5228980-7 307581-1 Exempt 311386-1 Exempt 311386-2 Exempt 311386-3 Exempt 311392-1 Exempt 311395-1 Exempt 311396-1 Exempt 312067-1 Exempt 312253-1 Exempt 312253-2 Exempt 312317-1 Exempt 2-329444-1 2-5329444-1 2-329444-2 2-5329444-2 2-329445-1 2-5329445-1 2-329446-1 2-5329446-1 2-329452-2 2-5329452-2 2-329456-1 2-5329456-1 2-329458-1 2-5329458-1 329517 5329517 2-330061-1 2-5330061-1 2-330062-1 2-5330062-1 2-330063-1 2-5330063-1 2-330358-2 2-5330358-2 330876 5330876 330878 5330878 331175 5331175 331178 5331178 331182 5331182 331238 5331238 332215 5332215 332225-3 5332225-3 332225-5 5332225-5 332225-6 5332225-6 332225 5332225 332342 5332342 413194-1 5413194-1 310 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Non-RoHS to RoHS Compliant Part Number Cross Reference (Continued) Non-RoHS RoHS Compliant Part No. Part No. 413194-2 5413194-2 413311-1 5414311-1 413364-2 5413364-2 413366-2 5413366-2 413476-2 5413476-2 413506-1 5413506-1 413515-2 5413515-2 413515-3 5413515-3 413515-7 5413515-7 413515-8 5413515-8 413515-9 5413515-9 413524-2 5413524-2 413524-5 5413524-5 413557-1 5413557-1 413557-2 5413557-2 413558-1 5413558-1 413558-2 5413558-2 413558-3 5413558-3 413558-5 5413558-5 413588-2 5413588-2 413588-4 5413588-4 413588-8 5413588-8 413588-9 5413588-9 1-413588-0 1-5413588-0 413589-1 5413589-1 413589-2 5413589-2 413589-3 5413589-3 413589-5 5413589-5 413589-7 5413589-7 413589-8 5413589-8 413589-9 5413589-9 1-413589-0 1-5413589-0 1-413589-1 1-5413589-1 1-413589-6 1-5413589-6 413590-3 5413590-3 413590-4 5413590-4 413590-8 5413590-8 413591-1 5413591-1 413592-2 5413592-2 413592-6 5413592-6 413592-9 5413592-9 1-413592-1 1-5413592-1 413631-1 5413631-1 413631-2 5413631-2 413631-3 5413631-3 413760-1 5413760-1 413760-3 5413760-3 413760-8 5413760-8 413760-9 5413760-9 413771-1 5413771-1 413771-3 5413771-3 413779-3 5413779-3 2-413779-4 2-5413779-4 413879-1 5413879-1 413879-2 5413879-2 413933-1 5413933-1 413959-1 5413959-1 413959-3 5413959-3 413959-4 5413959-4 413959-5 5413959-5 413959-6 5413959-6 Non-RoHS RoHS Compliant Part No. Part No. 413969-2 5413969-2 413986-1 5413986-1 414088-1 5414088-1 414094-2 5414094-2 414105-1 5414105-1 414160-5 5414160-5 414168-1 5414168-1 414168-3 5414168-3 414168-4 5414168-4 414168-5 5414168-5 414168-6 5414168-6 414170-1 5414170-1 414170-2 5414170-2 414171-3 5414171-3 414173-3 5414173-3 414194-1 5414194-1 414215-1 5414215-1 414217-1 5414217-1 414265-3 5414265-3 414284-2 5414284-2 414305-1 5414305-1 414337-1 5414337-1 414338-1 5414338-1 414352-1 5414352-1 414363-3 5414363-3 414363-4 5414363-4 414363-5 5414363-5 414363-8 5414363-8 414367-2 5414367-2 414373-1 5414373-1 414394-1 5414394-1 414409-1 5414409-1 414414-1 5414414-1 414459-1 5414459-1 414460-1 5414460-1 414493-4 5414493-4 414553-1 5414553-1 414651-3 5414651-3 414666-1 5414666-1 414758-1 5414758-1 414758-2 5414758-2 414758-3 5414758-3 414907-1 5414907-1 414946-2 5414946-2 414946-3 5414946-3 414946-5 5414946-5 414946-6 5414946-6 415006-1 5415006-1 415006-2 5415006-2 415020-1 5415020-1 415024-1 5415024-1 415024-3 5415024-3 415025-1 5415025-1 415025-2 5415025-2 415046-1 5415046-1 415085-1 5415085-1 415103-1 5415103-1 415103-2 5415103-2 415105-1 5415105-1 415105-2 5415105-2 415187-1 5415187-1 Non-RoHS RoHS Compliant Part No. Part No. 415189-1 5415189-1 415205-1 5415205-1 415214-1 5415214-1 415216-1 5415216-1 415218-5 5415218-5 415226-1 5415226-1 415232-4 5415232-4 415232-7 5415232-7 415242-2 5415242-2 415242-6 5415242-6 415248-1 5415248-1 415248-7 5415248-7 415252-1 5415252-1 415252-2 5415252-2 415252-3 5415252-3 415252-4 5415252-4 415255-1 5415255-1 415255-2 5415255-2 415255-3 5415255-3 415255-4 5415255-4 415276-2 5415276-2 415302-1 5415302-1 415302-2 5415302-2 415322-2 5415322-2 415332-1 5415332-1 415379-1 5415379-1 415381-1 5415381-1 415406-2 5415406-2 415417-1 5415417-1 415419-1 5415419-1 415485-1 5415485-1 415485-2 5415485-2 415485-3 5415485-3 415487-1 5415487-1 415487-2 5415487-2 415487-3 5415487-3 415520-1 5415520-1 415569-2 5415569-2 415632-1 5415632-1 415632-2 5415632-2 415633-1 5415633-1 415634-1 5415634-2 415634-2 5415634-2 415683-1 5415683-1 415712-1 5415712-1 415779-1 5415779-1 415832-1 5415832-1 447648-3 5447648-3 448103-2 5448103-2 603995-1 Exempt 603995-2 Exempt 603995-3 Exempt 603995-5 Exempt 603995-6 Exempt 856402-1 Exempt 887000-1 5887000-1 887046-1 5887046-1 887078-1 5887078-1 887089-1 5887089-1 1055439-1 Exempt 1055440-1 Exempt Non-RoHS RoHS Compliant Part No. Part No. 1055441-1 Exempt 1055442-1 Exempt 1055443-1 Exempt 1055444-1 Exempt 1055445-1 Exempt 1055446-1 Exempt 1055447-1 Exempt 1055448-1 Exempt 1055449-1 Exempt 1055450-1 Exempt 1055451-1 Exempt 1055454-1 Exempt 1055474-1 Exempt 1055475-1 Exempt 1055476-1 Exempt 1055477-1 Exempt 1055500-1 Exempt 1055831-1 Exempt 1055832-1 Exempt 1055833-1 Exempt 1055834-1 Exempt 1055836-1 Exempt 1055837-1 Exempt 1055838-1 Exempt 1055839-1 Exempt 1055840-1 Exempt 1055841-1 Exempt 1055842-1 Exempt 1055843-1 Exempt 1057088-1 6057088-1 1057094-1 6057094-1 1057116-1 6057116-1 1057159-1 6057159-1 1057165-1 6057165-1 1057176-1 6057176-1 1059632-1 6059632-1 1059665-1 6059665-1 1061002-1 6061002-1 1061035-1 6061035-1 1061092-1 6061092-1 1061094-1 6061094-1 1213890-1 Exempt 1274020-1 6274020-1 1274032-1 6274032-1 1274045-1 6274045-1 1274072-1 6274072-1 1274084-1 6274084-1 1274086-1 6274086-1 1274096-1 6274096-1 1274124-2 6274124-2 1274127-1 6274127-1 1274220-1 6274220-1 1274291-1 6274291-1 1274291-2 6274291-2 1274314-1 6274314-1 1274315-1 6274315-1 1274359-1 6274359-1 1274360-1 6274360-1 1274425-2 6274425-2 1274431-1 6274431-1 1274532-1 6274532-1 311 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Non-RoHS to RoHS Compliant Part Number Cross Reference (Continued) Non-RoHS RoHS Compliant Part No. Part No. 1311164-1 Exempt 1312079-1 6312079-1 1312113-1 6312113-1 1312121-1 6312121-1 1312123-1 6312123-1 1312124-1 6312124-1 1312137-1 1312137-1 1312138-1 6312138-1 1312139-1 6312139-1 1328873-1 6328873-1 1329818-1 6329818-1 1329819-1 1329819-1 1331959-1 6331959-1 Non-RoHS RoHS Compliant Part No. Part No. 1361137-1 6361137-1 1361138-1 1361138-1 1361139-1 6361139-1 1362765-1 6362765-1 1363524-1 6363524-1 1363525-1 6363525-1 1363526-1 6363526-1 1363527-1 6363527-1 1393488-3 Exempt 1393488-4 Exempt 1393524-1 Exempt 1393524-4 Exempt 1393524-5 Exempt Non-RoHS RoHS Compliant Part No. Part No. 1-1393524-1 Exempt 2-1393524-4 Exempt 2-1393524-6 Exempt 2-1393524-7 Exempt 1393665-1 6-1393665-1 1-1393665-4 -- 1-1393665-5 -- 1-1393665-6 -- 1-1393665-7 -- 2-1393670-1 -- 2-1393670-2 -- 2-1393670-3 -- 2-1393670-4 -- Non-RoHS RoHS Compliant Part No. Part No. 1393696-2 6-1393696-2 1393696-7 6-1393696-7 1402314-1 1402314-1 1408026-1 6408026-1 1408027-1 6408027-1 1408028-1 6408028-1 1408030-1 6408030-1 1408032-1 6408032-1 1408033-1 6408033-1 1408036-1 6408036-1 1408037-1 6408037-1 1408038-1 6408038-1 1725637-1 Exempt 312 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors M/A-COM to Tyco Electronics Part Number Cross Reference M/A-COM Tyco Electronics Part No. Part No. 127669-92 1311164-1 127893-98 1402314-1 2001 5003 02 1050525-1 2001 5031 02 1050542-1 2001 5032 02 1050548-1 2001 5385 02 1050598-1 2001 5395 02 1050602-1 2001 5443 02 1050611-1 2001 7188 02 1050721-1 2001 7641 02 1050740-1 2001 7941 02 1050757-1 2001 7985 02 1050770-1 2002 5015 00 1050854-1 2002 5016 00 1050859-1 2002 7188 02 1050903-1 2004 7188 02 1050996-1 2004 7641 02 1051005-1 2004 7685 02 1051007-1 2006 5010 00 1051046-1 2006 5013 00 1051052-1 2006 7941 00 1051081-1 2006 7985 00 1051085-1 2007 7188 02 1051140-1 2007 7641 02 1051145-1 2007 7685 02 1051147-1 2007 7941 02 1051151-1 2007 7985 02 1051157-1 2031 5002 00 1051638-1 2031 5003 02 1051644-1 2032 5002 00 1051852-1 2032 5003 02 1051855-1 2032 5007 00 1051861-1 2032 5021 02 1051867-1 2032 5026 02 1051869-1 2034 5008 00 1051942-1 2037 5005 02 1052063-1 2037 5006 02 1052067-1 2037 5007 02 1052072-1 2037 5008 02 1052076-1 2037 5100 02 1052098-1 2051 0000 02 1052324-1 2051 1352 02 1052349-1 2051 1618 02 1052360-1 2052 0000 02 1052422-1 2052 1200 02 1052518-1 2052 1201 00 1052522-1 2052 1201 02 1052523-1 2052 1215 02 1052528-1 2052 1300 02 1052534-1 2052 1350 02 1052544-1 2052 1352 02 1052552-1 2052 1612 02 1052563-1 2052 1658 02 1052577-1 2052 3354 02 1052628-1 2052 3356 02 1052634-1 2052 3358 02 1052643-1 2052 3359 02 1052646-1 2052 3363 02 1052652-1 2052 3500 02 1052684-1 2052 3502 02 1052689-1 2052 5636 02 1052898-1 M/A-COM Part No. 2052 5674 2054 1201 2054 1231 2054 1241 2056 5006 2058 5029 2062 0000 2064 0000 2080 0000 2081 0000 2081 2301 2082 2249 2082 2700 2082 5133 2084 0000 2086 0000 2087 1230 2088 0000 2098 5206 2098 5207 2098 5208 2098 5209 2098 5210 2098 5211 2098 5212 2098 5213 2098 5214 2098 5215 2098 5216 2098 5217 2098 5218 2098 5221 2098 5279 2098 5281 2098 5282 2098 5283 2098 5516 2204 7941 2207 7985 2231 7388 2318 0000 2367 0000 2367 5001 2367 5002 2380 2240 2381 2241 2382 2240 2382 2241 2399 5011 2399 5012 2598 5196 2598 5197 2598 5198 2598 5199 2598 5201 2598 5202 2598 5203 2598 5204 2598 5205 2598 5206 2598 5207 Tyco Electronics Part No. 02 1052902-1 02 1052978-1 02 1052982-1 02 1052986-1 02 1053092-1 02 1053222-1 00 1053354-1 00 1053378-1 00 1053488-1 02 1053635-1 00 1053646-1 02 1053780-1 00 1053788-1 02 1054426-1 02 1054869-1 02 1055018-1 02 1055047-1 02 1055065-1 54 1055439-1 54 1055440-1 54 1055441-1 02 1055442-1 02 1055443-1 02 1055444-1 02 1055445-1 02 1055446-1 02 1055447-1 02 1055448-1 54 1055449-1 54 1055450-1 02 1055451-1 10 1055454-1 10 1055474-1 02 1055475-1 02 1055476-1 02 1055477-1 02 1055500-1 09 1082029-1 09 1088312-1 36 1082034-1 54 1085456-1 54 1251802-1 54 1083946-1 54 1055689-1 00 1055694-1 00 1055695-1 00 1055696-1 00 1055697-1 54 1086008-1 54 1086009-1 54 1055831-1 54 1055832-1 54 1055833-1 54 1055834-1 54 1055836-1 54 1055837-1 54 1055838-1 54 1055839-1 54 1055840-1 54 1055841-1 54 1055842-1 M/A-COM Part No. 2598 5208 2598 5342 2598 5438 2831 7316 2831 7341 2831 7388 2834 7316 2834 7341 2834 7358 2834 7388 2837 7316 2837 7388 2902 7947 2902 7985 2908 7947 2908 7985 2965 5006 2980 0000 2980 2240 2981 2241 2982 2240 2982 2241 2998 5001 2998 5002 2998 5003 2998 5022 2998 5028 2998 5030 2998 5035 2998 5043 2998 5044 2998 5045 2998 5054 2998 5055 2998 5056 3001 7941 3001 7985 3002 7941 3004 7941 3004 7985 3006 7941 3051 0000 3051 1200 3051 1201 3052 0000 3052 1201 3080 2240 3080 2242 3081 2241 3082 0000 3082 2240 3082 2241 3082 2243 3082 2310 3082 2311 3082 2320 3082 2321 3084 2240 3101 7941 3101 7985 3104 7941 Tyco Electronics Part No. 54 1055843-1 54 1221286-1 54 1088313-1 02 1056436-1 02 1056438-1 02 1056443-1 02 1056445-1 02 1056447-1 02 1056450-1 02 1056452-1 02 1056456-1 02 1056462-1 62 1056526-1 62 1056527-1 62 1056553-1 62 1056554-1 62 1061692-1 62 1056700-1 00 1056702-1 00 1056706-1 00 1056707-1 00 1056708-1 02 1056721-1 02 1056722-1 02 1056724-1 94 1056728-1 02 1056729-1 02 1056731-1 02 1056736-1 02 1056743-1 02 1056744-1 02 1056745-1 94 1056750-1 94 1056751-1 94 1056752-1 00 6057088-1 00 6057094-1 00 6057116-1 00 6057159-1 00 6057165-1 00 6057176-1 10 1057275-1 10 1057277-1 10 1057279-1 10 1057284-1 10 1057290-1 00 1057341-1 00 1057343-1 00 1057367-1 00 1057374-1 00 1057377-1 00 1057381-1 00 1057385-1 00 1057387-1 00 1057388-1 00 1057390-1 00 1057392-1 00 1057463-1 00 1057631-1 00 1057635-1 00 1057676-1 M/A-COM Part No. 3104 7985 3106 7941 3106 7985 3152 0000 3152 1201 3180 2242 3180 2302 3180 2320 3182 2240 3182 2243 3184 2240 3280 2224 3280 2240 3281 2223 3282 2223 3282 2240 3282 2241 3284 2240 3680 2240 3680 2242 3682 2241 3682 2242 3684 2240 4503 7685 4503 7941 4503 7985 4504 7641 4504 7941 4504 7985 4506 7641 4506 7685 4506 7941 4506 7985 4510 7941 4510 7985 4522 7941 4522 7985 4533 7388 4534 7341 4536 5014 4536 7341 4536 7388 4540 7388 4551 1201 4551 1352 4551 3357 4552 1201 4552 1352 4557 5009 4557 5119 4557 5329 4557 5368 4558 1154 4558 5009 4558 5119 4558 5329 4562 0000 4563 0000 4563 5004 4565 0000 4580 2240 Tyco Electronics Part No. 00 1057679-1 00 1057697-1 00 1057699-1 10 1057775-1 10 1057780-1 00 1057841-1 00 1057843-1 00 1057845-1 00 1057853-1 00 1057857-1 00 1057908-1 00 1058056-1 00 1058058-1 00 1058066-1 00 1058077-1 00 1058081-1 00 1058083-1 00 1058117-1 00 1058651-1 00 1058653-1 00 1058664-1 00 1058666-1 00 1058675-1 02 1059399-1 00 1059402-1 00 1059404-1 02 1059408-1 00 1059410-1 00 1059412-1 02 1059451-1 02 1059452-1 02 1059453-1 02 1059456-1 00 1059465-1 00 1059467-1 02 1059505-1 02 1059506-1 02 1059523-1 02 1059525-1 02 1058572-1 02 1059540-1 02 1059541-1 02 1059551-1 02 1059563-1 02 1059566-1 02 1059572-1 02 1059594-1 02 1059596-1 02 1059617-1 02 6059632-1 02 1059637-1 02 1059651-1 02 1059654-1 02 1059657-1 02 6059665-1 02 1059671-1 00 1059681-1 00 1059684-1 00 1253111-1 00 1059691-1 02 1059707-1 313 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors M/A-COM to Tyco Electronics Part Number Cross Reference (Continued) M/A-COM Part No. 4581 2241 4581 2700 4582 2240 4582 2241 4582 2700 4583 2240 4584 2240 4584 2242 4584 2244 4585 2240 4585 2241 4703 7985 4706 7985 4710 7985 4733 7316 4733 7388 4736 5001 4736 7316 4740 7388 4751 3355 4757 1154 4757 3204 4757 5006 4757 5014 4763 0000 5001 5015 5007 5008 5031 5007 5031 5014 5062 5003 5064 5003 5134 5016 5180 2240 5181 2241 5182 2240 5182 2241 5801 7947 5801 7985 5802 7947 5802 7985 5807 7985 5818 5002 5818 5002 5818 5003 5831 5002 5831 5003 5831 5003 5831 7316 5831 7316 5834 7388 Tyco Electronics Part No. 02 1059711-1 00 1059713-1 02 1059716-1 02 1059718-1 00 1059720-1 02 1059724-1 02 1059729-1 02 1059731-1 02 1059733-1 02 1059756-1 02 1059758-1 00 1059857-1 02 1059868-1 00 1059874-1 02 1059884-1 02 1059886-1 02 1059887-1 02 1059888-1 00 1059889-1 02 1059894-1 02 1059901-1 00 1059902-1 02 1059903-1 00 1059905-1 00 1059919-1 09 1060163-1 09 1060183-1 09 1060220-1 09 1060221-1 09 1060256-1 09 1060259-1 10 1254781-1 00 1060487-1 00 1060494-1 00 1060498-1 00 1060500-1 09 1060772-2 09 1060772-1 09 1060774-2 09 1060774-1 09 1060787-1 09 1060811-2 10 1060811-1 10 1060813-1 10 1060869-1 09 1060871-1 10 1060872-1 09 1060875-2 10 1060875-1 10 1060883-1 M/A-COM Part No. 5837 5025 5837 5030 5837 5031 5837 5031 5858 0000 5858 0000 5862 5002 5862 5002 5862 5003 5862 5003 5862 5004 5862 5004 5862 5007 5862 5018 5863 0000 5863 0000 5864 5001 5864 5001 5864 5002 5864 5002 5864 5003 5864 5003 5864 5008 5880 2240 5881 2241 5882 2240 5882 2241 5899 5004 5899 5009 7081 2301 7081 2311 7081 5008 7081 5009 7082 2242 7082 2243 7082 2300 7082 2310 7082 5004 7082 5005 9631 7179 9637 7179 9662 5000 9664 0000 9960 1100 9960 1200 9960 1305 9960 2100 9960 2200 9960 2305 9960 2510 Tyco Electronics Part No. 10 1330723-1 10 1329293-1 09 1363301-2 10 1363301-1 09 1060959-1 10 1060960-1 09 1060984-1 10 1060985-1 09 1330126-1 10 1060989-1 09 1060995-1 10 1060996-1 13 6061002-1 13 1061007-1 09 1085221-1 10 1061015-1 09 1061022-1 10 1061023-1 09 1061026-1 10 1061027-1 09 1061029-1 10 1061030-1 13 6061035-1 00 1061070-1 00 1061071-1 00 1061072-1 00 1061073-1 54 6061092-1 54 6061094-1 00 1061738-1 00 1061739-1 00 1061742-1 00 1061744-1 00 1061750-1 00 1061751-1 00 1061752-1 00 1061753-1 00 1061757-1 00 1061758-1 10 1362990-1 10 1362991-1 10 1361169-1 10 1363106-1 24 1064524-1 24 1064530-1 24 1064533-1 24 1064535-1 24 1064538-1 24 1064540-1 24 1064542-1 M/A-COM Tyco Electronics Part No. Part No. 9960 3100 24 1082845-1 9960 4100 01 1064543-1 9960 4100 02 1064544-1 9960 4100 04 1064546-1 9960 4100 07 1064549-1 9960 4100 08 1064550-1 9960 4200 01 1064552-1 9960 4200 02 1064553-1 9960 4200 04 1064555-1 9960 4200 07 1064558-1 9960 4200 08 1064559-1 9960 4305 01 1064560-1 9960 4305 02 1064561-1 9960 4305 04 1064563-1 9960 4305 07 1064566-1 9960 4305 08 1064567-1 9980 4100 01 1329174-1 9980 4100 02 1329175-1 9980 4100 04 1408050-4 9980 4100 05 1255378-4 9980 4100 07 1408051-4 9980 4100 08 1330401-4 9980 4200 01 1329174-2 9980 4200 02 1329175-2 9980 4200 04 1408050-5 9980 4200 05 1255378-5 9980 4200 07 1408051-5 9980 4200 08 1330401-5 9980 4305 01 1310432-1 9980 4305 02 1329175-3 9980 4305 04 1408050-6 9980 4305 05 1255378-6 9980 4305 07 1408051-6 9980 4305 08 1330401-6 A55P22E999X 1311206-1 A55P23E999X 1313453-1 A55X01B999X 6312079-1 A57R03G999X 1311209-1 B67A54T022X 1311097-1 B67A54T117X 1311098-1 B67A64T022X 1311099-1 B67A64T062X 1311100-1 B67A64T280X 1311696-1 B67A64T437X 1311102-1 B67A64TA25X 1313507-1 B67B42T022X 1311103-1 B67B42T437X 1311104-1 B67B44T022X 1311106-1 B67B44T062X 1311698-1 B67B44T437X 1311111-1 M/A-COM Tyco Electronics Part No. Part No. B67B44TA25X 1313508-1 B67E64T022X 1408041-1 B67H16T493X 1313511-1 B67H49T022X 1311115-1 B67H64T022X 1327083-1 B67H64T062X 1311117-1 B67H64T117X 1311700-1 B67H64T280X 1313883-1 B67H64T437X 1311118-1 B67H64TA25X 1313887-1 B67H66T022X 1311120-1 B67H66T062X 1311701-1 B67H66T437X 1311122-1 B67H74T463X 1314422-1 B67N08T999X 1311125-1 B67N12T999X 1314103-1 B67N25T999X 1314102-1 B67P34G999X 1313364-1 B67R53G999X 1311127-1 B67Z50T999X 6-1311703-1 C65E06G022X 1311638-1 D75A02B001X 6331959-1 D75A02B004X 6362765-1 D75B01B470X 6328873-1 D75B02B010X 6408028-1 D75B03B001X 6408030-1 D75B03B004X 6312113-1 D75B04B004X 6408027-1 D75B04B010X 6408026-1 D75B05B004X 6408038-1 D75G03B001R 6408032-1 D75G03B004R 6408033-1 D75G07B060R 6363524-1 D75G08B001R 6363525-1 D75G08B004R 6363526-1 D75G09B010R 6363527-1 D75G10B004R 6408036-1 D75R02B999X 6408037-1 D75X06B999X 6312121-1 D75X12E470X 6312123-1 D75X14B999X 6312124-1 D75X15B999X 6361137-1 N15X09E470X 1312137-1 N15X10B999X 6312138-1 N15X12E470X 6329818-1 N15X14E010X 6312139-1 N15X16E999X 1361138-1 N15X17E999X 6361139-1 N15X18E010X 1329819-1 T35E60E010X 1312569-1 314 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Part Number Index Note: This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part No. 50084 50095 50105 50107 51563 51565 51692 51751 201097 201098 201143 201144 201145 201146 221108 221500 221509 221539 221540 221543 221551 221586 221789 221790 221951 221988 222163 222428 225014 225088 225093 225094 225348 225389 225551 225668 225886 226023 226060 226537 227223 227945 228179 228215 228216 228502 228553 228658 282938 329631 329632 330022 330024 330620 332056 332057 413453 Page 246 246 246 246 247, 248 248 21 194 245 245 245 245 245 245 58, 72, 73 41 42 94 94 63 64 63 121 121 55, 56 63 61, 74 52 22 248 22 23 38 22 35 23 49 247 247 248 55, 56 25 33 182 182 37 179 23 97 57, 58, 59 73, 91 57, 58, 59, 73, 91 65 64 54 248 248 65 Part No. 413985 413990 413996 414002 414026 414171 414396 414612 414766 414895 414946 414948 414963 414969 415001 415232 415327 415340 415377 415380 415381 415490 415500 415504 415523 415567 415672 415774 415796 619028 619041 619052 619053 619061 619062 619068 619072 619075 619076 619078 619085 619106 619107 619115 619127 619133 619134 619135 619137 619196 619201 619210 619211 619213 619214 619215 619219 619220 619223 619224 619226 619228 Page 178 180 181 178 181 35 43 180 94 182 178 179 181 182 182 21 99 181 185 181 181 185 184 185 99 76 181 180 64 230, 235 230 235 236 230, 231 230, 231 235 230, 231 233 235 230, 235 131 136 133 115 204 232 204 204 235 234 233 236 234 234 236 127 261 136 131 131 135 135 Part No. 619229 619231 619238 619271 887098 1050525 1050542 1050548 1050598 1050602 1050611 1050721 1050740 1050757 1050770 1050854 1050859 1050903 1050996 1051005 1051007 1051046 1051052 1051081 1051085 1051140 1051145 1051147 1051151 1051157 1051638 1051644 1051852 1051855 1051861 1051867 1051869 1051942 1052063 1052067 1052072 1052076 1052098 1052324 1052349 1052360 1052422 1052518 1052522 1052523 1052528 1052534 1052544 1052552 1052563 1052577 1052628 1052634 1052643 1052646 1052652 1052684 Page 206 233 206 261 94 110 110 110 112 112 112 105 112 110 110 110 110 105 106 113 113 111 111 111 111 106 113 113 112 112 104 104 104 107 104 107 107 104 105 105 108 108 108 114 116 118 114 116 116 116 119 114 114 116 118 119 120 120 120 120 120 120 Part No. 1052689 1052898 1052902 1052978 1052982 1052986 1053092 1053222 1053354 1053378 1053488 1053635 1053646 1053780 1053788 1054426 1054869 1055018 1055047 1055065 1055689 1055694 1055695 1055696 1055697 1056436 1056438 1056443 1056445 1056447 1056450 1056452 1056456 1056462 1056526 1056527 1056553 1056554 1056700 1056702 1056706 1056707 1056708 1056721 1056722 1056724 1056728 1056729 1056731 1056736 1056743 1056744 1056745 1056750 1056751 1056752 1057275 1057277 1057279 1057284 1057290 1057341 Page 120 118 119 117 117 117 115 117 121 121 122 122 256 123 259 123 123 122 123 122 214 217, 255 217, 253 217, 258 217, 259 106 106 106 107 107 107 107 108 108 154 154 154 154 152, 154 255 253 258 259 152, 155 155 155 156 155 155 155 155 155 155 156 156 156 24 24 24 24 24 254 315 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Part Number Index (Continued) Part No. 1057343 1057367 1057374 1057377 1057381 1057385 1057387 1057388 1057390 1057392 1057463 1057631 1057635 1057676 1057679 1057697 1057699 1057775 1057780 1057841 1057843 1057845 1057853 1057857 1057908 1058056 1058058 1058066 1058077 1058081 1058083 1058117 1058572 1058651 1058653 1058664 1058666 1058675 1059399 1059402 1059404 1059408 1059410 1059412 1059451 1059452 1059453 1059456 1059465 1059467 1059505 1059506 1059523 1059525 1059540 1059541 1059551 1059563 1059566 1059572 1059594 1059596 Page 254 253 25 258 257 257 258 257 257 257 254 33 33 37 37 38 38 41 41 254 254 254 258 258 255 254 254 253 257 258 257 254 163 255 255 257 259 255 162 158, 160 158, 160 162 158, 160 158, 160 162 162 160 160 161 161 161 161 163 163 163 163 163 164 164 168 164 164 Part No. 1059617 1059637 1059651 1059654 1059657 1059671 1059681 1059684 1059691 1059707 1059711 1059713 1059716 1059718 1059720 1059724 1059729 1059731 1059733 1059756 1059758 1059857 1059868 1059874 1059884 1059886 1059887 1059888 1059889 1059894 1059901 1059902 1059903 1059905 1059919 1060163 1060183 1060220 1060221 1060256 1060259 1060487 1060494 1060498 1060500 1060772 1060774 1060787 1060811 1060813 1060869 1060871 1060872 1060875 1060883 1060959 1060960 1060984 1060985 1060989 1060995 1060996 Page 165 167 165 165 165 168 166 166 166 255 253 256 259 257 257 255 255 255 255 259 257 171 171 171 172 172 172 172 172 175 173 175 173 175 174 194 195 194 194 195 195 255 253 258 258 199 199 200 198 198 198 198 198 198 199 201 201 200 200 200 200 200 Part No. 1061007 1061015 1061022 1061023 1061026 1061027 1061029 1061030 1061070 1061071 1061072 1061073 1061692 1061738 1061739 1061742 1061744 1061750 1061751 1061752 1061753 1061757 1061758 1064524 1064530 1064533 1064535 1064538 1064540 1064542 1064543 1064544 1064546 1064549 1064550 1064552 1064553 1064555 1064558 1064559 1064560 1064561 1064563 1064566 1064567 1082029 1082034 1082845 1083946 1085221 1085456 1086008 1086009 1088312 1088313 1221286 1251802 1253111 1255378 1274007 1274191 1274192 Page 201 200 201 201 201 201 201 201 254 253 258 256 156 256 256 256 256 259 256 257 258 256 258 214 214 214 215 215 215 215 216 216 216 217 217 216 216 216 217 217 216 216 216 217 217 111 106 215 214 200 209 209 209 112 209 217 214 166 211 77 239 239 Part No. 1274330 1274449 1274513 1274520 1274544 1274563 1274566 1274568 1274571 1274572 1274584 1274594 1274662 1274663 1274668 1274684 1274688 1274689 1274694 1274714 1274734 1274735 1274794 1274795 1274804 1274805 1274806 1274807 1274808 1274935 1310432 1311097 1311098 1311099 1311100 1311101 1311102 1311103 1311104 1311106 1311111 1311115 1311117 1311118 1311120 1311122 1311125 1311127 1311206 1311209 1311638 1311696 1311698 1311700 1311701 1311703 1312137 1312569 1313364 1313453 1313507 1313508 Page 181 133 145 133 134 80 80 80 81 81 81 133 28 81 57 81 27 27 109 137 27 27 237 237 27 27 27 28 28 76 210 187 187 187 187 187 187 188 188 188 188 189 190 190 189 189 190 191 254 254 194 187 188 190 189 191 18 35 191 253 187 188 316 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Part Number Index (Continued) Part No. 1313511 1313883 1313887 1314102 1314103 1314422 1327083 1329174 1329175 1329293 1329819 1330126 1330401 1330723 1361138 1361169 1362990 1362991 1363106 1363301 1392019 1392020 1393562 1393662 1393665 1393668 1393670 1393672 1393680 1393681 1393682 1393696 1393757 1402314 1407578 1408041 1408050 1408051 1408120 1408148 1408149 1408150 1408151 1408152 1408312 1408313 1408314 1408332 1408333 1408336 1408337 1408338 1408339 1408340 1408341 1408342 1408343 1408346 Page 189 190 190 190 190 190 190 210 210 198 18 200 211 198 18 203 203 203 203 198 240 240 137, 147 241 148, 149, 150, 253, 256, 259 240 131, 132, 133, 134, 135, 136, 147, 253, 256, 259, 260 141, 142, 143 140, 142, 143, 144 140, 141, 143, 145, 146, 150 140, 141, 142, 143, 144 250 142, 145, 220 15 208 188 211 211 221 219 219 220 220 221 219 219 219 127 126 126 127 126 126 128 128 128 128, 260 125 Part No. 1408347 1408348 1408349 1408393 1408496 1408541 1442004 1460010 1460052 1460055 1460060 1460118 1460128 1460132 1460139 1460159 1460169 1460468 1460469 1460470 1460802 1460803 1460815 1460817 1460821 1460823 1484546 1566230 1658260 1750107 1750108 1750109 1750110 1775146 1775227 1775228 1775229 1775230 5148385 5148386 5221111 5221123 5221128 5221162 5221185 5221198 5221199 5221221 5221244 5221325 5221336 5221402 5221506 5221629 5221980 5221981 5222006 5222092 5222093 5222117 5222132 5222165 Page 125 125 125 128, 253 220 109 206 131 10 25 134 25 144 141 134 9 144 115 115 195 261 261 135 135 147, 148 146 174 224 204 225 225 225 226 224 227, 260 227, 260 227, 259 227, 259 239 239 180 60 47, 48, 49, 55 243 66 91 69 70 71 41 75 68 42 65 242 242 61 72 72 76 73 64 Part No. 5222420 5222462 5222506 5225089 5225092 5225349 5225361 5225363 5225392 5225395 5225396 5225397 5225398 5225554 5225555 5225557 5225559 5225661 5225662 5225664 5225667 5225669 5225699 5225886 5225974 5226978 5226990 5226993 5227079 5227086 5227161 5227169 5227222 5227426 5227661 5227671 5227673 5227676 5227677 5227699 5227715 5227716 5227726 5227754 5227755 5227764 5227818 5227820 5227839 5228217 5228226 5228435 5228596 5228618 5228686 5228979 5228980 5329444 5329445 5329446 5329452 5329456 Page 60 74 32 24 21 34 21 23 21 47, 48, 49 51 52 53, 54 34 32 36 34 21 21 22 23 22 21 49 50 59 57 58 47, 48, 49 21 57 55 58 56 57 58 58 57 57 60 55 55 56 55 55 40 39 39 39 179 64 181 242 242 91 51 53, 54 48 49 47 51 54 Part No. 5329458 5329517 5330061 5330062 5330063 5330358 5330876 5330878 5331175 5331178 5331182 5331238 5332215 5332225 5332342 5413194 5413364 5413366 5413476 5413506 5413515 5413524 5413557 5413558 5413588 5413589 5413590 5413591 5413592 5413631 5413760 5413771 5413779 5413879 5413933 5413959 5413969 5413986 5414088 5414094 5414105 5414160 5414168 5414170 5414171 5414173 5414194 5414215 5414217 5414265 5414284 5414305 5414311 5414337 5414338 5414352 5414363 5414367 5414373 5414394 5414409 5414414 Page 53 64 47 51 53 48 47 49 50 50 50 36 92 90 90 72 65 63 85 43 85 85 65 75 68 66, 67 67, 70 42 63 62 69 53, 54 51 57 40 50 60 74 74 85 64 21 36 179 35 34 56 85 71 50 85 60 63 181 181 85 178 88 62 74 72 64 317 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 RF Coax Connectors Part Number Index (Continued) Part No. 5414459 5414460 5414493 5414553 5414651 5414666 5414758 5414907 5414946 5415006 5415020 5415024 5415025 5415046 5415085 5415103 5415105 5415187 5415189 5415205 5415214 5415216 5415218 5415226 5415232 5415242 5415248 5415252 Page 72 60 87 87 86 64 87 72 178 179 76 96 62 57 86 85 72 71 60 86 96 86 57 94 21 22 23 24 Part No. 5415255 5415276 5415302 5415322 5415332 5415379 5415406 5415417 5415419 5415484 5415487 5415520 5415569 5415632 5415633 5415634 5415683 5415712 5415779 5415832 5447648 5448103 5887000 5887046 5887078 5887089 6057088 6057094 Page 22 96 95 97 98 181 98 72 72 184 184 73 95 73 72 72 98 95 87 92 107 107 98 97 95 97 21 21 Part No. 6057116 6057159 6057165 6057176 6059632 6059665 6061002 6061035 6061092 6061094 6274020 6274032 6274045 6274072 6274084 6274086 6274096 6274124 6274127 6274291 6274314 6274315 6274359 6274360 6274425 6274431 6274532 6311225 Page 22 23 23 23 167 167 202 202 202 202 97 98 98 72 72 71 121 75 75 74 61 61 74 74 76 133 21 10 Part No. 6312079 6312113 6312121 6312123 6312124 6312138 6312139 6328873 6329818 6331959 6361137 6361139 6362765 6363524 6363525 6363526 6363527 6408026 6408027 6408028 6408030 6408032 6408033 6408036 6408037 6408038 6408399 Part No. 1055454 1055469 1055474 1055475 1055476 1055477 1055500 1055831 1055832 1055833 1055834 1055835 1055836 1055837 1055838 1055839 1055840 1055841 1055842 1055843 1213890 1311164 Page 263 262 262 262 262 262 263 263 263 263 263 263 263 263 263 263 263 263 263 263 266 191 Part No. 1393488 1393494 1393524 1725837 1775231 M22520/36-01 M22520/36-02 M22520/36-03 M22520/36-04 M22520/36-05 M22520/36-06 M22520/36-07 M22520/36-08 M22520/36-09 M22520/36-10 M22520/36-11 M22520/36-12 M22520/36-13 MIL-C-22520/2-01 MIL-C-22520/5-01 Page 14 9 15 19 19 15 19 10 17 9 17 19 9 11 11 11 11 10 10 9 9 10 10 11 11 10 18 Tooling Part Number Index Part No. 13126 13127 21027 58318 58433 58483 58489 59980 59981 69477 69710 189721 220015 220220 220221 220222 220224 220241 307581 308075 311386 311392 Page 268 268 268 268 266 192 192 267, 268 268 266 266 266 266 268 268 268 268 268 268 268 268 268 Part No. 311395 311396 312067 312253 312317 354500 603995 856402 1055420 1055439 1055440 1055441 1055442 1055443 1055444 1055445 1055446 1055447 1055448 1055449 1055450 1055451 Page 268 268 268 268 268 267 267 266 263 262, 263 262, 263 262, 263 263 263 263 263 263 263 263 263 263 263 Page 265 265 264 , 265 266 227 268 268 268 268 268 268 268 268 268 268 268 268 268 192 192 318 Catalog 1307191 Revised 3-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Global Contacts Americas Argentina - Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil - Sao Paulo Phone: +55-11-3611-1311 Fax: +55-11-3611-0397 Canada - Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: (Technical Support) Phone: +905-470-4425 Fax: +905-474-5525 Colombia - Bogota Phone: +57-1-231-9398 Fax: +57-1-660-0206 Mexico - Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 United States - Harrisburg, PA Phone: +717-564-0100 Fax: +717-986-7575 Product Information Center: (Technical Support) Phone: +800-522-6752 Fax: +717-986-7575 Asia/ Pacific Australia - Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: (Technical Support) Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 Japan - Toyko Phone: +81-44-844-8111 Fax: +81-44-812-3207 Product Information Center: (Technical Support) Phone: +81-44-844-8013 Fax: +81-44-812-3200 New Zealand - Auckland Phone: +64-9-634-4580 Fax: +64-9-634-4586 Singapore - Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Philippines - Makati City Phone: +632-848-0171 Fax: +632-867-8661 Thailand - Bangkok Phone: +66-2-955-0500 Fax: +66-2-955-0505 India - Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Korea - Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 People's Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Vietnam and Indochina - Ho Chi Minh City Phone: +84-8 930-5546 Fax: +84-8 930-3443 Indonesia - Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Malaysia - Kuala Lumpur Phone: +60-3-78053055 Fax: +60-3-78053066 Shanghai Phone: Fax: +86-21-2407-1588 +86-21-2407-1599 Taiwan - Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 Europe/ Middle East/Africa Austria - Vienna Phone: +43-1 90 5 60-0 Fax: +43-1 90 5 60-1333 Belgium - Kessel-Lo Phone: +32-16-35-23-00 Fax: +32-16-35-23-52 Germany - Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: (Technical Support) Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Bulgaria - Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Germany - Langen Phone: +49-6103-709-0 Fax: +49-6103-709-1223 Czech Republic - Kurim Phone: +420-5-41-162-111 Fax: +420-5-41-162-223 Germany - Speyer Phone: +49-6232-30-0 Fax: +49-6232-30-2243 Denmark - Glostrup Phone: +45-43-480-452 Fax: +45-43-441-414 Germany - HTS Division - Neunkirchen Phone: +49-2247-305-0 Fax: +49-2247-305-122 Egypt - Cairo Phone: +20-2-29 04 281 Fax: +20-2-41 92 334 Greece - Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655 Estonia - Tartu Phone: +372-5138-274 Fax: +372-7400-779 Hungary - Budapest Phone: +36-1-289-1000 Fax: +36-1-289-1010 Finland - Helsinki Phone: +358-95-12-34-20 Fax: +358-95-12-34-250 France - Cergy-Pontoise Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: (Technical Support) Phone: +33-1-3420-8943 Fax: +33-1-3420-8623 1307191-3M-LUG-FP-3-07 Printed in the U.S.A. Ireland - Dublin Phone: +353-1-820-3000 Fax: +353-1-820-9790 Israel - Yokneam Phone: +972-4-959-0508 Fax: +972-4-959-0506 Italy - Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031116 Lithuania - Vilnius Phone: +370-5-2131-402 Fax: +370-5-2131-403 Netherlands - 's-Hertogenbosch Phone: +31-73-624-62-46 Fax: +31-73-621-23-65 Product Information Center: (Technical Support) Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway - Nesbru Phone: +47-66-77-8886 Fax: +47-66-77-8855 Poland - Warsaw Phone: +48-22-45-76-700 Fax: +48-22-45-76-720 Romania - Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Russia - Moscow Phone: +7-495-926-5506/07/08/09 Fax: +7-495-926-5505 Russia - St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia - Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 South Africa - Port Elizabeth Phone: +2741-503-4500 Fax: +2741-581-0440 Spain - Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Product Information Center: (Technical Support): Phone: +34-93-291-0330 Fax: +34-93-200-3779 Sweden - Upplands Vasby Phone: +46-8-50-72-50-00 Fax: +46-8-50-72-50-01 Switzerland - Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey - Istanbul Phone: +90-212-281-8181/2/3 Fax: +90-212-281-8184 Ukraine - Kiev Phone: +380-044-206-2265 Fax: +380-044-206-2264 United Kingdom - Swindon Phone: +44-8706-080-208 Fax: +44-1793-572-109 Product Information Center: (Technical Support) Freephone GB: 0800-267-666 Phone: +44-208-420-8341 or 8343 +44-208-420-8081 For Middle East/African Countries Not Shown Phone: +33-1-3420-8866 Fax: +33-1-3420-8300 Tyco Electronics Corporation www.tycoelectronics.com Tyco Electronics Corporation Harrisburg, Pennsylvania 1307191 Revised 3-07 3M-LUG-FP tycoelectronics.com