Tyco Electronics Corporation
Harrisburg, PA
tycoelectronics.com
1307191–3M–LUG–FP–3-07
RF Coax Products
RF Coax Products Catalog
Catalog 1307191 Revised 3-07
Cat1307191_Cover+Spine_v7.qxd 2/21/07 2:46 PM Page 1
2
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Introduction
RF Coax Connectors
The Tyco Electronics
RF Coaxial catalog
combines the best products
from industry leading brand
names like M/A-COM and
AMP. We have integrated
these into one cohesive set
of RF products focused
specifically on wireless,
wireline carrier, and enter-
prise networking sectors of
the world telecom equip-
ment market.
Tyco Electronic’s broadest
selection of RF connectors
and coaxial cable assem-
blies provides you with a
solution for every intercon-
nection requirement.
Type N and 7/16 connec-
tors are used where high
power and rugged reliability
are required, typically as
antenna feeds, filter/
combiner I/O’s, and power
amplifier outputs. SMA,
SMB, and TNC connectors
are the primary cable inter-
face for inner cabinet rout-
ing and are available in
panel mount, board mount,
and cable terminations.
Subminiature connectors
such as MCX, SMP, DIN,
and BlindMate provide
panel to board and back-
plane connections. Finally,
our micro miniature SSMT,
and MMCX series provide
excellent board to board
and card edge to board
solutions.
All of these interfaces are
supported with cable termi-
nating tools and between
series adapters to meet all
your requirements for trou-
ble free terminations at the
lowest applied cost. The
appendices hold a wealth
of information including a
Theory and Application
tutorial, RG/U cable specifi-
cation tables, Application
notes on White Bronze plat-
ing and intermodulation
distortion.
Whether you need rugged
external RF power cables,
panel mount, board to
board, blindmate, or DIN,
Tyco Electronics has the
connection.
How to Use This Catalog
Based on the communica-
tions gear that you are
designing:
■Wireless Basestations
■Carrier Rack Equipment
■Chassis Set Top Box
■NIC Card
Typical equipment drawings
on pages 306-309 guide
you to the interconnect
section(s) in this catalog.
Selection guides will direct
you to products based
on performance and
mechanical requirements
such as impedance, VSWR,
max. frequency, power
handling, etc.
There are other guides
to help you find the right
connection: A table of
contents listed by interface
type, a complete connector
type selector describes
each interface with typical
applications, and a mini-
selection guide shows
key parameters to quickly
pinpoint the right connector
type.
Product Facts
■Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E-81956
as indicated by Product
Family
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E-81956 as
indicated by Product Family
■Certified by Canadian
Standards
Association
File No. LR 7189 as
indicated by Product Family
■Produced under a Quality
Management System
certified to ISO 9001
A copy of the
certificate is available
upon request
ISO
Certified
9001
R
R
R
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all Tyco Electronics
products. They can provide
you with:
■Technical Support
■Catalogs
■Technical Documents
■Product Samples
■Tyco Electronics
Authorized Distributor
Locations
Restriction on the use of Hazardous Substances
(RoHS)
At Tyco Electronics, we’re ready to support your RoHS require-
ments. We’ve assessed more than 1.5 million end items/com-
ponents for RoHS compliance, and issued new part numbers
where any change was required to eliminate the restricted
materials. Part numbers in this catalog are identified as:
RoHS Compliant — Part numbers in this catalog are RoHS
Compliant, unless marked otherwise. These products comply
with European Union Directive 2002/95/EC as amended 1
January 2006 that restricts the use of lead, mercury, cadmium,
hexavalent chromium, PBB, and PBDE in certain electrical and
electronic products sold into the EU as of 1 July 2006.
NOTE: For purposes of this Catalog, included within the defini-
tion of RoHS Compliant are products that are clearly “Out of
Scope” of the RoHS Directive such as hand tools and other
non-electrical accessories.
Non-RoHS Compliant — These part numbers are identified
with a “” symbol. These products do not comply with the
material restrictions of the European Union Directive
2002/95/EC.
NOTE: Information regarding RoHS compliance is provided
based on reasonable inquiry of our suppliers and represents
our current actual knowledge based on the information provided
by our suppliers. This information is subject to change. For lat-
est compliance status, refer to our website referenced at right.
Getting the Information You Need
Our comprehensive on-line RoHS Customer Support Center
provides a forum to answer your questions and support your
RoHS needs. A RoHS FAQ (Frequently Asked Questions) is
available with links to more detailed information. You can also
submit RoHS questions and receive a response within 24
hours during a normal work week. The Support Center also
provides:
■Cross-Reference from
Non-compliant to Compliant
Products
■Ability to browse RoHS
Compliant Products in our
on-line catalog
■Downloadable Technical Data
Customer Information
Presentation
■More detailed information
regarding the definitions used above
■So whatever your questions when it comes to RoHS, we’ve
got the answers at www.tycoelectronics.com/leadfree
RoHS
Customer
Support
Center
3
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Catalog Table of Contents
RF Coax Connectors
Disclaimer
While Tyco Electronics Corporation
and its affiliates referenced herein
(“Tyco Electronics”) have made every
reasonable effort to ensure the accuracy
of the information in this catalog,
Tyco Electronics does not guarantee that
it is error-free, nor does Tyco Electronics
make any other representation, warranty
or guarantee that the information is
accurate, correct, reliable or current.
Tyco Electronics reserves the right to
make any adjustments to the information
contained herein at any time without
notice. Tyco Electronics expressly dis-
claims all implied warranties regarding
the information contained herein, includ-
ing, but not limited to, any implied war-
ranties of merchantability or fitness for
a particular purpose. Tyco Electronics’
only obligations are those in the
Tyco Electronics Standard Terms and
Conditions of Sale, and in no case will
Tyco Electronics be responsible for any
incidental, indirect, or consequential
damages arising from the sale, resale,
use, or misuse of its products. Users
should independently evaluate the suit-
ability of, and test each product for, their
application.
The dimensions, specifications, designs,
construction, materials and processes in
this catalog are for reference purposes
only and are subject to change without
notice. Please consult Tyco Electronics
for the most current product information.
The export of certain Tyco Electronics
products is restricted by the Arms Export
Control Act (Title 22, U.S.C. Sec 2751, et
seq.) or the Export Administration Act of
1979, as amended (Title 50, U.S.C., App.
2401 et seq.). Orders may be subject to
export approval by the U.S. Government.
Buyer must comply with all applicable
export laws of all applicable jurisdictions.
© Copyright 2007, 2000, 1998,
1994, 1992, 1990, and 1982 by
Tyco Electronics Corporation.
All International Rights Reserved.
ACTION PIN, AMP, AMP-HDI, AMPLIMITE,
AMP-O-LECTRIC, CERTI-CRIMP,
COAXICON, M/A-COM, OSP, OSSP,
PIDG, PRO-CRIMPER, RAYCHEM,
SIEMAX, SMT/QuickGrip, SOLISTRAND,
STAX, TE LOGO, TYCO ELECTRONICS
and Z-PACK are trademarks.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
GPO is a trademark of Corning Gilbert, Inc.
HIROSE is a trademark of Hirose Electric.
MURATA is a trademark of Murata
Electronics, Inc.
ROLM is a trademark of the Rolm Corp.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TPX is a trademark of Mitsui Chemicals
America, Inc.
TROMPETER is a trademark of
Trompeter Electronics, Inc.
VALOX is a trademark of General Electric
Company.
Other products, logos, and company
names mentioned herein may be
trademarks of their respective owners.
See inside back cover for Global
Contacts and phone numbers.
Miniature Connectors
7-16 Series Connectors .................................................................................................7-11
Lightning Protection Connectors .................................................................................12-19
Surge Protectors ......................................................................................................12-15
/4 Wave Stub Tuners ..............................................................................................16-19
N Series Connectors....................................................................................................20-25
Quick Lock N (QLN) Series Connectors .....................................................................26-28
TNC Connectors ..........................................................................................................29-43
BNC Connectors..........................................................................................................44-77
Mini BNC Connectors ..................................................................................................78-81
Decoupled Connectors................................................................................................82-87
Self-Terminating PC Board Connectors............................................................................88
Twin BNC Connectors..................................................................................................89-92
F Series and G Series Connectors..............................................................................93-99
Subminiature Connectors
SMA Connectors......................................................................................................100-123
QMA Connectors .....................................................................................................124-128
DIN Connectors .......................................................................................................129-156
Series 1.0/2.3 .......................................................................................................129-137
Series 1.6/5.6 .......................................................................................................138-146
Measurement Accessories...................................................................................147-150
Coaxial Cables ............................................................................................................151
SMP Connectors......................................................................................................152-156
Blind Mate Connectors ............................................................................................157-175
OSP Miniature Blind Mate Connectors ................................................................157-168
OSSP Subminiature Blind Mate Connectors........................................................169-175
SMB Connectors......................................................................................................176-192
SMC Connectors......................................................................................................193-195
MCX Connectors......................................................................................................196-203
Compression Coax Board-to-Board Connectors............................................................204
STAX Coax Connectors ..........................................................................................205, 206
Micro Miniature RF Coax Connectors
SMT/QuickGrip Connectors.....................................................................................207-211
SSMT Connectors....................................................................................................212-217
MMCX Connectors...................................................................................................218-221
UMCC Connectors...................................................................................................222-228
Switching Coax Connectors ....................................................................................229-236
Quick Snap Stripline (QSL) Connectors .........................................................................237
Multi Position Connectors
DIN Inserts...............................................................................................................238-241
Size 8 Contacts.......................................................................................................242, 243
COAXICON Contacts...............................................................................................244-248
SIEMAX Connectors ...............................................................................................249, 250
Between Series Adapters............................................................................................251-260
Coaxial Terminations .........................................................................................................261
Application Tooling .....................................................................................................262-268
Cable Assembly Capabilities......................................................................................269-271
Appendix
A - Theory and Application......................................................................................272-277
B - White Bronze Application Note..........................................................................278-280
C - Intermodulation Application Note ......................................................................281-283
D - Typical Coaxial Cable Specifications ................................................................284-298
E - Maximum Power Handling Capabilities for Cables ..................................................299
F - Nominal Loss Characteristics for Cables..................................................................300
G - Glossary of Terms..............................................................................................301-305
RF Coaxial Solutions for Communications Equipment Overview..............................306-309
RoHS Compliant to Non-RoHS Compliant Part Number Cross Reference ................310-312
M/A-COM Part Number Cross Reference...................................................................313, 314
Part Number Index......................................................................................................315-318
4
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Connector Selection
RF Coax Connectors
Connector Types
7-16 Series connectors are designed for medium to high power applications such as cellular base
stations, control components, antenna and broadcast. The 7-16 Series minimizes intermodulation
distortion by white bronze or silver plating the electrical path. Combined hex/knurl coupling nuts
allow for manual or torque tightening, further reducing distortion by providing a strong butt joint.
Lightning Protection devices have an integral surge arrestor capsule which is designed to protect
equipment from high current pulses. It is effective against very fast rise times as induced by electromag-
netic pulses from nuclear explosions (NEMP) and the slower pulses arising from lightning strikes (LEMP).
N Series threaded connectors have an air dielectric interface and are low cost. These connectors
operate to 11 GHz and are commonly used in cable-based local-area networks (LAN’s) medium
power transmitters, and base station antenna applications.
TNC connectors have an interface similar to BNC except for a threaded coupling nut. The tighter fit
provided by this screw-on connection improves interface control allowing connectors to operate up to
11 GHz. TNC connectors are excellent for mobile units where top-notch performance is required
under vibration.
BNC connectors offer easy engagement and disengagement using bayonet couplings and overlap-
ping dielectrics. They are most useful for frequently coupled and uncoupled RF connections with fre-
quencies below 4 GHz. BNC connectors find applications in flexible networks, instrumentation, and
computer peripheral interconnections.
F & G Series connectors offer enhanced performance beyond 1 GHz. Designed to meet the rigor-
ous requirements of Bellcore TA-NWT-001503 and SCTE specifications, the F & G series provides
high current carrying capabilities in both sealed and un-sealed configurations. Plugs, jacks and
adapters are available in threaded and push-on versions. These connectors meet the evolving
needs of the communications industry for increased reliability and performance.
SMA threaded connectors are widely used in microwave communications. Connectors operate to at
least 12.4 GHz on flexible coax cables, and up to 26.5 GHz on semi-rigid coax cables. Crimp-on
SMA connectors that operate to 26.5 GHz are available.
Blind Mate connectors operate to 22 GHz for OSP connectors, 28 GHz for OSSP connectors, and
40 GHz for SMP style connectors. These connectors offer easy slide-on connection and require less
alignment between the cable and the equipment than other connectors with comparable band width.
Blind Mate connectors are widely used as coaxial interconnects between plug-in modules and moth-
erboards when axial and radial misalignments are necessary.
SMB connectors feature a snap coupling for fast connection. A self centering outer spring and over-
lapping dielectric allows easy snap-on and excellent performance even in moderate vibration. The
SMB is smaller in size than the SMA and excellent where engineers are concerned about circuit
miniaturization. Typical application is inter- or intra-board connection of RF or digital signals.
Commercial 50 ohm versions operate to 4 GHz, and 75 ohm versions reach 2 GHz.
MCX connectors offer a high reliability, space saving sub-miniature coaxial cable to cable and cable
to board interconnection system. The MCX connectors impedance types are applicable up to 6 GHz.
Surface Mount (SMT) connectors. The RF solution to the communication and information age.
Tyco Electronics’ SSMT and SMT Quick Grip connectors are designed to meet the growing demand
for surface mount RF connector technology. These connectors operate up to 6 GHz utilizing cable
assembly design to terminate to SMT connectors. Surface mount connectors contribute to high
density packaging and high volume manufacturing requirements.
Multi Position connectors. These connector series, including the 1.0/2.3 (CECC 22230), 1.6/5.6
(CECC 22240), Subminiature D (DIN 41652 and CECC 75 301-082), and Tyco Electronics’ own
SIEMAX multi coax connector series offer the customer a broad choice of options where density and
performance are a major concern. The 1.0/2.3 series contacts are available in both 50 and 75 Ohm
versions and are designed for use to 10 GHz. The different types of coupling mechanisms, such as
screw on, slide-in and latching coupling provide for a variety of space-saving installations. The con-
nector series 1.6/5.6 has been modified to incorporate improved technical advantages. A 75 Ohm
design for use up to 8 GHz, it offers excellent screening effectiveness and is a most suitable compo-
nent for those applications where the transmission of high bit rates is required. In Subminiature D
type connectors these interfaces provide good electrical grounding and electromagnetic shielding in
a small package size. These plug connectors address the increasing demands related to EMC
(electromagnetic compatibility) and RFI (immunity to radiated noise), and are widely used as inter-
face connectors in office and data systems, telecommunications equipment, and in measurement
and control systems. Tyco Electronics’ SIEMAX connectors combine the benefits of surface mount
technology and modular design. This 75 Ohm connector series operates up to 2 GHz and offers a
compact grid pitch of 10mm. Its uses include multiplex and high-density systems, and Base Station
applications.
Miscellaneous connector types include multiple-circuit connectors that use coaxial contacts in a
pin-and-socket configuration, crimp-on ferrules that offer fast, reliable connections for attaching one or
more ground taps to shielded wire and braided shield terminations for connecting cable shields to pc
boards. Also available are network/premises interconnect products for Ethernet/IEEE 802.3 systems
and coaxial taps for simple, dependable connections from transceiver to LAN without cutting the cable.
5
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Connector Selection Guide
Nominal Maximum
Temperature
Cable Retention Coupling
Maximum Durability
Connector
Page
Product
Impedance Frequency
Rating
Mechanism
Peak Cycles
Body
No.
Ohms GHz C lb [N]
Voltage
Finish
7-16 Series 50 7 -55° to +155°
RG8A/U
—Threaded 4000 500
White Bronze
7
Lightning Protection 50 2.5 -45° to +85°
Adapter
—Threaded 650 500
White Bronze
12
N Series 50 11 -65° to +85°
90
400.3 Threaded 1000 500
Nickel
20
Commercial
(RG-214/U)
TNC 50 7 -65° to +165°
60
266.9 Threaded 500 500
Silver
29
Single Crimp
(RG-58C/U)
TNC 50 11 -65° to +165°
60
266.9 Threaded 500 500
Silver or Nickel
29
Dual Crimp
(RG-58C/U)
TNC 50 7 -55° to +85°
60
266.9 Threaded 500 500
Nickel
29
Commercial
(RG-58C/U)
TNC 75 2 -55° to +85°
60
266.9 Threaded 500 500
Nickel
29
75 Ohm
(RG-59B/U)
BNC 50 2.5 -65° to +165°
60
266.9 Bayonet 500 500
Silver or Nickel
44
Single Crimp
(RG-58C/U)
BNC 50 4 -65° to +165°
60
266.9 Bayonet 500 500
Silver or Nickel
44
Dual Crimp
(RG-58C/U)
BNC 50 4 -55° to +85°
60
266.9 Bayonet 500 500
Nickel
44
Dual Crimp Commercial
(RG-58C/U)
BNC 50 4 -55° to +85°
60
266.9 Bayonet 500 500
Nickel
44
Hex Crimp
(RG-58C/U)
BNC 50 4 -65° to +165°
40
177.9 Bayonet 500 500
Nickel
44
Field Serviceable
(RG-142B/U)
BNC 75 2 -65° to +85°
60
266.9 Bayonet 500 500
Nickel
44
75 Ohm
(RG-59B/U)
Twin BNC Non- —-55° to +85°
25
111.2 Bayonet 500 200
Silver or Nickel
89
constant
(RG-108/U)
40
F Series 75 — -55° to +85°
(Series 59, 6, 7 —
Threaded (F) 500 200
Nickel
93
Single Braid)
40
G Series 75 — -55° to +85°
(Series 59, 6, 7 —
Push-On (G) 500 200
Nickel
93
Single Braid)
SMA 50 26.5 -65° to +105°
60
266.9 Threaded 500 500 Gold or
Passivated
100
Semi-Rigid
(RG-402/U) Stainless Steel
SMA 50 12.4 -65° to +165°
40
177.9 Threaded 500 500 Gold or
Passivated
100
Flexible
(RG-58C/U) Stainless Steel
SMP 50 40 -65° to +165°
20
89 Snap-On 500 100
Gold
152
(RG-405/U)
OSP 50 22 -65° to +125°
60
267.02 Push-On 500 5000
Gold or Passivated
157
Semi-Rigid
(RG-402/U) Stainless Steel
OSP 50 12.4 -65° to +125°
40
178 Push-On 335 5000
Gold or Passivated
157
Flexible
(RG-58/U) Stainless Steel
OSSP 50 28 -65° to +125°
20
89 Push-On 335 5000
Gold or Passivated
169
Semi-Rigid
(RG-405/U) Stainless Steel
OSSP 50 — -65° to +125°
20
89 Push-On 250 5000
Gold or Passivated
169
Flexible
(RG-316/U) Stainless Steel
SMB 50 4 -65° to +85°
20
89 Snap-On 335 500
Nickel
176
(RG-316/U)
SMC 50 10 -65° to +85°
20
89 Threaded 250 500
Gold
193
(RG-174/U)
50 6 -65° to +165° 20 32 Snap-On 500 500
Nickel 196
MCX
(RG-316/U)
Connectors 20 32 Snap-On 500 500
Nickel 196
75 6 -65° to +165°
(RG-187/U)
SMT Quick Grip 50 3 -40° to +125°
Omni-Flex
—Snap-On 250 5
Gold
207
SSMT 50 6 -40° to +125°
Omni-Flex
—Snap-On 250 100
Gold
212
MMCX 50 6 -55° to +155°
10
44.5 Snap-On 500 500
Gold
218
(RG-178/U)
Mini BNC 75 2 -40° to +85°
20
—Bayonet 300 500
Nickel
78
(735A)
QMA 50 6 -40° to +125°
20
—Quick Lock 335 100
Nickel
124
(RG-316/U)
Comp. Coax 50 4 -40° to +125°
N/A
—N/A 125 25
Gold
204
50 10 -40° to +85° ——Thread/ 500 500
—129
DIN 1.0/2.3
Snap/Slide
——Thread/ 500 500
—129
75 2 -40° to +85°
Snap/Slide
Switching Coax 50 2.4 —
N/A
—N/A — 30,000
—
229
RF Coax Connectors
6
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Connector Selection (Continued)
Method of Termination
Tyco Electronics provides connectors that can be termi-
nated to coaxial cable, printed circuit boards or other con-
nector interfaces.
Selection of the proper connector to terminate to an RG
cable is simplified by using the format of this catalog.
Experience has proven that certain connector types lend
themselves to termination of particular coax cable sizes.
For example, miniature cables such as RG 188 are most
practically terminated to subminiature connectors such
as SMB and SMC styles. Figure 3 illustrates the interface
diameters of each connector type and the dielectric out-
side diameter (DOD) of popular RG cables. It is most eco-
nomical to select a connector that terminates to a cable
with a dielectric diameter close in size to the connector’s
interface diameter. The product information sections of this
catalog have been organized so that all connector con-
struction types are grouped together by cable size. This
allows easy selection of the connector construction best
suited for the application.
Tyco Electronics continually looks at new cable types
and will release new part numbers based upon general
market or specific customer needs. If you cannot find a
Tyco Electronics part number for a specific cable type,
please contact one of our sales locations or your local
distributor to make an inquiry.
Tyco Electronics offers a wide range of connector configu-
rations for terminating to printed circuit boards. Also avail-
able are connectors which allow the interconnection of one
interface type to another.
By reviewing this catalog, a connector can be found to
match most any application. Since the RF connector is a
part of a transmission line system, make sure when select-
ing a new connector design, that it is compatible with the
overall system’s performance.
Construction
The construction of a connector will greatly affect the
purchase price. The connector tables in this catalog
include construction details that allow you to select con-
nectors that meet your requirements at the lowest price.
Commercial designs use lower cost materials, such as zinc
diecast bodies, polypropylene insulators and silver-plated
contacts. Specific details of connector construction are
listed in each product section of this catalog.
The materials used affect both performance and cost.
Common base metals include brass, beryllium copper and
stainless steel. The most common plating used for the cen-
ter contact is gold because of its low contact resistance,
superior mating properties and corrosion resistance.
TEFLON, polypropylene and polymethylpentene (TPX) are
the most common connector dielectrics. TEFLON offers the
lowest loss, the most stable electrical properties and high-
est operating temperature. But since it cannot be injection
molded, manufacturing is more costly than other materials.
Be certain, when specifying connectors, that the tempera-
ture and voltage limitations are taken into consideration.
Assembly
There are several methods of assembly or termination, but
they can be categorized into two major areas: (1) Solder
center conductor and clamp braid (Category A) and (2)
Crimp center conductor and crimp braid. Other methods
are derived from combinations of the above, (e.g., solder
center conductor and crimp braid. Method (1) (Category
A) is generally used where no specialized tools are avail-
able, such as with field installations. With the development
of low cost assembly tools, method (2) is becoming more
popular for field installation.
Crimping is preferred in most manufacturing environments
where assembly tooling is available because terminations
can be made in the least amount of time and with the
greatest reliability. The design of crimp tools assures that
every termination is made the same; this cannot be done
with a clamp design without further testing or inspection.
Figure 4 illustrates the difference between braid crimping
using AMP “O” crimp and the industry-standard hex crimp.
The AMP “O” crimp gives a more consistent pressure on
the outer collar. In addition, the crimp of the center con-
ductor provides superior VSWR as shown in Figure 5.
Benefits derived by using AMP “O” crimp:
■No soldering of center contact is required. This allevi-
ates all prospective problems associated with the sol-
dering process such as excess solder, cold solder
joints and overheating the dielectric.
■Fewer parts resulting in less assembly errors
■Braid crimping which eliminates the need for the
combing, screwing and torquing associated with the
braid clamp.
RG-8
RG-6
N
RG-59/62
RG-58/142
BNC/TNC
SMA
RG-180
SMB/C
RG-188
RG-178
Cable Type Connector
0 0.1 0.2
Diameter (Inches)
0.3 0.4 0.5
Figure 3
TEFLON is a trademark of E.I. Dupont de Nemours and Company.
TPX is a trademark of Mitsui Chemicals America, Inc.
7
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
7-16 Series Connectors
Product Facts
■Designed for cellular base-
stations, control component,
antenna and broadcast
applications
■Available in White Bronze
plating
■Minimizes Intermodulation
Distortion by the use of
non-ferrous materials
■Hex knurl for wrench
tightening
■Available for several
popular RG cable sizes in
solder-clamp and crimp-
crimp attachment styles
Tyco Electronics offers a
comprehensive range of
7-16 Connectors to suit
today’s challenging Wireless
Infrastructure Market. This
market demands reliable,
intermodulation sensitive
connectors that accommo-
date higher power.
Tyco Electronics 7-16
Coaxial Connector Series
provides reliable, intermod-
ulation- minimizing solutions
that also provide a logical
alternative to N Series con-
nectors in high power appli-
cations where a more
rugged interface design is
required. Typical examples
of this include transmitter to
antenna links and channel
switching networks.
The 7-16 Series conforms to
CECC 22190 and IEC 169-4
specification standards and
has a 2.7kV working voltage
at the connector interface
and maximum power
handling capability of 4kW.
The series has been
designed for these
demanding environments
and can withstand a mini-
mum of 500 mating cycles.
Popular RG cable sizes are
covered in both
solder/clamp and crimp
attachment styles. Two
piece combination connec-
tors adapt to straight or
right-angle configurations,
minimizing the number of
different part codes needed
by the customer. Series N to
7-16 between series
adapters facilitate the transi-
tion between system inter-
faces as well as providing a
test interface.
The increased customer
demand for greater channel
capacity combined with
increased sensitivity of
receivers has exposed the
IMD (Intermodulation
Distortion) phenomenon.
To address this problem
7-16 Connectors have been
designed to reduce
IMD through the use of non-
ferrous base materials and
by silver plating of the elec-
trical path. The proprietary
White Bronze plating tech-
nique is standard, providing
high corrosion resistance,
low porosity, scratch
resistance, low RF loss
and a non-magnetic finish.
Incorporation of hex-knurl
coupling nuts allow for
hand or wrench tightening
of connectors, depending
upon the application.
Tyco Electronics is a
global ISO 9001 certified
manufacturer and maintains
a complete in-house
Intermodulation Testing
facility. Connector part
numbers shown form just a
small part of the extensive
interconnect package that
Tyco Electronics offers for
the professional wireless
and telecom markets.
Related Product Data
N Connectors —Pages 20-25
Application Notes —
White Bronze — Appendix B
Intermodulation — Appendix C
Between Series Adapters
For 7-16 Series Between Series
Adapters, see pages 251-260.
8
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
7-16 Series Connectors (Continued)
Materials
Female Contacts (inner and outer) Beryllium Copper
Other Metal Parts Brass
Insulators Fluorocarbon Polymer
Gaskets Silicone Rubber
Finishes
Parts in the electrical path Silver over copper
Other Metal Parts White Bronze
Electrical
Frequency Range DC-7GHz
Impedance 50 Ohms
Insulation Resistance 10,000 Megohms Minimum
2.7kV (connector)
Maximum Working Voltage rms (sea level) 1.4kV (versions for RG 213, 214 and 393)
Maximum Proof Voltage rms (sea level) 2.7kV (connector)
1.4kV (versions for RG 213, 214 and 393)
Center Contact Resistance 0.8 milliohm (max.) after conditioning
Insertion Loss <1.5dB to 5 GHz
VSWR 1.02 + 0.03f up to 7 GHz
where f is measured in GHz
Intermodulation Better than –150dBc
Mechanical
Coupling Torque 18.5 – 22 ft.-lbs.
Proof Torque 25 ft.-lbs.
Mechanical Endurance 500 mating cycles
Environmental
Temperature Rating –55°C to +155°C
General Specifications
9
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
7-16 Series Connectors (Continued)
Straight Cable Plug
Solder/Solder
Ø 32.00 ± 0.20
[1.260 ± .008]
50.35 ± 0.50
[
1.982 ± .020
]
4.50
[.177] Typ.
23.50
[.925] Typ.
Ø 16.50 ± 0.20
[.650 ± .008]
Cable Type Body Plating Part No.
1/2" Corrugated White Bronze/ 1460159-1
Gold
43.5
[1.71]
32.0
[1.26] Dia.
Cable Type Body Plating Part No.
RG 8A/U, RG 213/U White Bronze 6331959-1
RG 9B/U, RG 214/U White Bronze 6362765-1
43.0
[1.69]
34.3
[1.35]
32.0
[1.26] Dia.
36.0
[1.42]
Assembled
Cable Type Body Plating Part No.
RG 58C/U, RG 141A/U White Bronze 6408028-1
RG 213/U White Bronze 6408030-1
RG 214/U White Bronze 6312113-1
36.0
[1.42]
32.0
[1.26]
43.0
[1.69]
Right-Angle Cable Plug
Solder/Crimp
Straight Cable Plug
Crimp/Crimp
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
10
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Cable Type Body Plating Part No.
RG 8A/U, RG 213/U White Bronze 6408032-1
RG 9B/U, RG 214/U White Bronze 6408033-1
44.0
[1.73]
46.5
[1.83]
24.8
[0.98]
17.2
[0.68]
5.00
[0.20]
Assembled
24.8
[0.98]
29.5
[1.16] Dia.
3.70
[0.15]
Dia
4 Holes.
Mounting Detail
Straight Panel Mount
Cable Jacks
Crimp/Crimp
Panel Socket Launcher
Body Plating Part No.
White Bronze 6311225-1
White Bronze 1460052-2
21.6
[0.85]
5.00
[0.20]
24.8
[0.98]
24.8
[0.98]
29.5
[1.16] Dia.
3.70
[0.15]
Dia
4 Holes.
Mounting Detail
7-16 Series Connectors (Continued)
Right-Angle Cable Plug
Solder/Clamp
43.0
[1.69]
32.0
[1.26]
23.2
[0.91]
Cable Type Body Plating Part No.
RG 55B/U, RG 58C/U,
RG 141A/U, RG 142B/U, White Bronze 6408026-1
RG 223/U, RG 400/U
T-Flex 402 Silver 6328873-1
43.0
[1.69]
32.0
[1.26] Dia.
47.2
[1.86]
Cable Type Body Plating Part No.
RG 213/U, RG 214/U,
RG 393/U White Bronze 6408027-1
RG 8A/U, RG 9B/U,
RG 213/U, RG 214/U White Bronze 6408038-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
7-16 Series Connectors (Continued)
Right-Angle Panel Jack
Solder/Clamp
46.3
[1.82]
24.8
[0.98]
17.2
[0.68]
5.00
[0.20]
24.8
[0.98]
29.5
[1.16] Dia.
47.2
[1.86]
3.70
[0.15]
Dia
4 Holes.
Mounting Detail
Cable Type Body Plating Part No.
RG 213/U, RG 214/U,
RG 393 White Bronze 6408036-1
RG 58C/U, RG 142B/U,
RG 223/U, RG 400/U White Bronze 6363527-1
46.3
[1.82]
24.8
[0.98]
17.2
[0.68]
5.00
[0.20]
34.2
[1.35]
24.8
[0.98]
29.5
[1.16] Dia.
36.7
[1.44]
Assembled
3.70
[0.15]
Dia
4 Holes.
Mounting Detail
Cable Type Body Plating Part No.
RG 55B/U, RG 142B/U,
RG 233/U, RG 400/U White Bronze 6363524-1
RG 8A/U, RG 213/U White Bronze 6363525-1
RG 9B/U, RG 214/U White Bronze 6363526-1
Combination Panel Jack
Solder/Crimp
11
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
49.0
[1.93]
33.0
[1.30]
14.0
[0.55]
45.0
[1.77]
Max
Panel
Body Plating Part No.
White Bronze 6408037-1
Bulkhead Adapter
Jack/Jack
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
12
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Lightning and EMP Protection Devices
Product Facts
■Cellular operator protection
against EMP (electro-
magnetic pulses) caused
by lightning strikes
■Two different categories:
Surge protectors and
Quarter wave stub tuners
■For use in cellular infra-
structure including GSM,
DCS 1800, and PCS 1900
systems
■Incorporates Gas Discharge
Tube (GDT) technology
Tyco Electronics has devel-
oped a unique series of
Lightning and EMP protec-
tion devices for use in cellu-
lar infrastructure including
GSM, DCS 1800, and PCS
1900 systems. These
devices are designed to
offer the cellular operator
protection against EMP
(electro-magnetic pulses)
caused by lightning strikes.
Direct or even near strikes
produce fast rising electric
fields within micro-seconds.
These fields generate high
voltage pulses through
unprotected antennas and
transmission lines which
lead to the primary commu-
nication equipment. High
voltage pulses can cause
extensive damage leading
to costly repairs as well as
significant loss of service to
subscribers. These protec-
tive devices come in two
different categories: surge
protectors and quarter wave
stub tuners.
To ensure that proper, low
level contact resistance is
established between the LP
device and mounting wall, it
is recommended that a min-
imum torque of 50 in/lbs /
5.65 n/m be applied to
tighten the connector
mounting nut. A recom-
mended minimum torque of
35 in/lbs / 3.95 n/m should
also be applied for installa-
tion of replacement surge
protector capsules to
ensure proper protection
performance.
In order to ensure that
resultant currents from light-
ning or EMP strikes do not
interfere with parallel
transmission lines within
protected electronic equip-
ment, surge protector
devices must be installed
with proper orientation.
The surge protector side
of the device should be
mounted in the unprotected
side of the equipment while
the mounting nut is posi-
tioned internally in the
protected area.
It is important when plan-
ning lightning protection,
that the user can estimate
the potential number of
direct strikes. This informa-
tion may influence the type
of device selected or the
requirement for routine
maintenance checks.
Significant attention must be
paid to the height of sup-
porting structure as this,
when related to the typical
number of thunderstorms in
a particular region, allows
us to estimate the probabil-
ity of a direct strike taking
place. To assist our cus-
tomers in this, the following
table and chart has been
included in this note. This
should enable lightning pro-
tection planners to establish
the likelihood of direct
strikes across a network
anywhere in the world.
Detailed application notes
are available for proper
selection of lightning pro-
tection devices (surge pro-
tectors & stub tuners) as
well as intermodulation and
White Bronze plating.
Number of Thunderstorm hmax/m hmax/m hmax/m
Days per year 10% 20% 50%
05 28 39 61
10 18 26 40
15 14 20 31
20 12 17 26
30 9.4 13 20
40 7.9 11 17
50 6.9 9.5 15
70 5.6 8.0 12
90 4.8 7.0 10.6
130 3.9 5.5 8.5
150 3.5 5.0 7.7
180 3.1 4.4 6.9
Table 1: Maximum height of supporting building for a given number of thunderstorm days (when hmax is exceeded,
probability of direct strike to supporting building within 15 years is greater than 10% for hmax values given in second
column, 20% for hmax values given in third column and 50% for hmax values given in the fourth column).
Selecting your RF Coaxial
Lightning Protection Device
Between Series Adapters
For 7-16 Series and N Series Between
Series Adapters, please see pages
251-260.
13
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Surge Protectors
Advantages
■Broadband
■Allows DC bias on the transmission line.
(critical for applications using mast top
electronics.)
■No harmonic passband
■Ease of retrofitting antenna sights
■GDT easily accessible for replacement
Limitations
■Routine maintenance recommended
■3 GHZ maximum frequency
■Initial pass-through voltage
Selection of a Lightning
Protection Device
At right are the basic
advantages and limitations
for both types of protection
to use in the proper selec-
tion for your application.
These devices incorporate Gas Discharge
Tube (GDT) technology. A GDT is a
hermetically sealed tube containing an
inert gas. The tube is inserted in the side
of the device through an easily accessible
weather sealed port. During normal
operation the tube is inactive. When an
installation is struck by lightning, a high
voltage impulse will appear on the coaxial
line. As the impulse amplitude rises, a level
is reached where the impulse surpasses
the dynamic voltage threshold of the tube
and the electrodes arc over to discharge
the energy to ground. Prior to activation of
the tube, there will be a short period of time
where energy will be present on the line.
This residual pulse is equal to the dynamic
voltage threshold of the tube. The maxi-
mum impulse voltage a tube can handle
without discharging is referred to as the
impulse sparkover voltage. This capacity
of the GDT is quoted as follows:
Characteristic Symbol Definition Impulse Typical
Value
Impulse Dynamic
sparkover Uzdyn voltage 1kV/µS650V
voltage threshold
In the case of the referenced chart,
the voltage will rise at one kilovolt per
microsecond and the tube will fire after 650
nanoseconds. During activation a small
percentage of voltage (called arc voltage)
will still pass through. This will be approxi-
mately 30 volts. When the pulse subsides,
the tube again becomes inactive leaving a
small residual voltage on the line. A direct
lightning strike results in an impulse current
of high amplitude. The capability of a device
to protect a system is defined as the
impulse discharge current rating. This is
defined as the peak current of an impulse
which the device can withstand ten times
(5 at each polarity at fixed intervals) without
affecting the device. maximum impulse
discharge current is the peak current of an
impulse the device can withstand once.
Surge protectors are often used in applica-
tions requiring a standing DC line voltage.
This is typical in applications with mast top
electronics. The maximum voltage capacity
of a surge protector prior to it surpassing
the static voltage threshold and discharg-
ing it to ground is defined as its D.C.
Product Facts
■Excellent for Broadband
Frequency Applications
■Field Replaceable Gas
Discharge Tube
■Available Interfaces
Facilitate Retrofit
Capabilities
■Low VSWR up to 2.5GHz
■Specialized White Bronze
Finish
14
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Surge Protectors (Continued)
sparkover voltage. This capacity is quoted
as follows:
Characteristic Symbol Definition Impulse Typical
Value
d.c. Static
sparkover Uzstat voltage n/a 230V
voltage threshold
In these applications it is important to
select a device that will assure the tube
can return to its inactive state after the
passage of a surge. This feature of the
Surge protector is known as the holdover
voltage. If the device continues to conduct,
the protected line will be short circuited
and the tube will heat up (glow mode). If
left in this state, the tube can overheat and
destruct. GDT’s have a finite life span which
is inversely proportional to the energy
dissipated. At extremes it is possible to
reach a level where the tube is unable to
discharge all the energy and is destroyed.
It is therefore necessary to schedule rou-
tine maintenance checks and periodically
replace the tube within the surge protector.
Surge protectors offer excellent lightning
protection for broadband systems and are
usable up to 3 GHz. Standard interfaces
include 7-16, N, and SMA. Configurations
include straight and bulkhead mounted
adapters which allows for ease of assimila-
tion into existing systems.
Requirement Detail
Electrical
Frequency Range DC to 3GHz
Impedance 50Ω
VSWR Performance ≤1.33:1
Insertion Loss (Typical) 0.45dB
Impulse Discharge Current (8/20µs, multiple strike) 20kA
Maximum Impulse Discharge Current (8/20µs, single strike) 50kA
Dynamic Sparkover Voltage, NEMP (1kV/µs) 2,000V
Dynamic Sparkover Voltage, LEMP (1kV/µs) 800V
Dynamic Sparkover Voltage, Static (<100V/µs) 90V*
Materials
Body Parts Brass
Gaskets Silicone Rubber
Female Contacts Beryllium Copper
Male Contacts Brass
Insulators P.T.F.E.
Environmental
Operating Temperature Range -45° C to +85° C
Relative Humidity up to 100%
* Determined by gas tube used, can be higher than value shown.
Specifications
Frequency Range DC to 3GHz
Contact Plating Gold
Body Plating White Bronze
Max Panel 10.00mm
Compliant With CECC22210/
CEC22110
Coupling Torque 0.7-1.1Nm
Proof Torque 1.7Nm both ends
Endurance 500 Matings
Recommended
Mounting Hole
53.8
[2.12]
13.6
[0.54]
Ref. 25.4
[1.00]
Sq.
21.5
[0.85]
Ref.
14.0
[0.55]
16.0
[0.63]
Dia.
N Series Jack to SMA
Bulkhead Jack Adapter
Part Number
6312079-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
15
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Surge Protectors (Continued)
Frequency Range DC to 3.0 GHz
Contact Plating Gold
Body Plating White Bronze
Max Panel 10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1 Nm
Proof Torque 1.7 Nm
Endurance 500 Matings
Recommended
Mounting Hole
53.8
[2.12] Ref. 25.4
[1.00]
Sq. 16.0
[.063]
Dia.
13.6
[.054]
N Series Jack to N Series
Bulkhead Jack Adapter
Part Number
6312138-1
Frequency Range DC to 3.0 GHz
Contact Plating Silver
Body Plating White Bronze
Compliant With CECC22190
Coupling Torque 25 - 30 Nm
Proof Torque 35Nm
Endurance 500 Matings
31.9
[1.25]
56.5
[2.23]
Ref.
34.0
[1.34]
Dia. Ref.
7-16 Plug to 7-16
Jack Adapter
Part Number
6312121-1
d.c. Sparkover Voltage: 230V ± 46V
Impulse Sparkover Voltage: 700V typ.
(1kV/mS) (900V max)
Glow Discharge Voltage: 72V
Arc Discharge Voltage: 10V
a.c. Discharge Current: 20A
(1 sec, 50Hz)
Impulse Discharge Current: 20kA (50kA for
(8/20mS waveform) one strike)
Insulation Resistance (@100V): 10GW
Capacitance: 2pF
Gas Discharge Tube
Replacement
Part Number
1402314-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
λ/4 Stub Tuners
16
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
These devices are three port
coaxial connectors. The third
port extending from the main
through path is terminated in
a short circuit at a pre-deter-
mined distance calculated to
be exactly one quarter wave-
length at the desired center
frequency (see graph).
Unlike surge protectors, this
design eliminates concerns
about residual pulse,
sparkover voltage and resid-
ual voltage ensuring greater
protection for sensitive
electronic equipment. As
opposed to surge protec-
tors, stub tuners will absorb
lightning strikes without
need for replacing compo-
nents. These devices yield
very low VSWR and feature
high attenuation within a rel-
atively narrow pass-band
(+/- 70 MHz) but are appli-
cation specific. Stub tuners
also pass energy in bands
that are harmonically related
to the fundamental center
frequency. The graphs
below show a typical test
impulse and the response of
a stub tuner.
Stub tuners are classified
into two broad categories—
simple and broadband. The
simple stub tuner exhibits a
V-shaped response on the
VSWR vs. frequency plot.
The trough of the V is
designed to occur at the
required Fo and the band-
width is restricted to approx-
imately 8%. The broadband
tuner employs extra RF tech-
niques, similar to multiple
cavity filtering, which
increase the effective band-
width by approximately 20%.
Tyco Electronics offers a
wide variety of stub tuners
for the most popular fre-
quency bands to facilitate
purchase without need for
custom design and manu-
facturing. Designs exist for
GSM, PCS 1900, DCS 1800
frequencies with standard
industry interfaces includ-
ing SMA, 7-16, and Type N.
Configurations include
cable assemblies, cabled
connectors, and adapters
for ease of assimilation into
existing systems. Stub
tuners are maintenance free
since they incorporate no
active components though
it is recommended that a
check of the stub tuner
affixment be made following
heavy discharges at an
installation.
Product Facts
■Ideal for use with GSM,
PCS and DCS
■Maintenance Free Operation
■Low VSWR Within Specified
Bandwidth
■Configurations include
direct attachments to Cable
variants
■Optional White Bronze
Finish
li
Vi
Vrlr
0.3
1.0
1.9
0.5
0
V
T
1 = 1.67T
T
2
T
0
1
T
1
t
326.400 110.308
VkA
244.800 94.5588
VkA
163.200 78.8088
VkA
81.6000 63.0588
VkA
0.0 47.3088
uV kA
-81.600 31.5588
VkA
-163.20 15.8088
VkA
-244.80 58.80
VA
-326.40 -15.691
VkA
-640.0nS, 80.033280 V
10.98uS, 49.45920kA
0.0nS 20.00uS 40.00uS 60.00uS 80.00uS
0.0nS 20.00uS 40.00uS 60.00uS 80.00uS
λ/4 Shorting Stub Basics
Typical Test Impulse
Typical λ/4 Test Response
Advantages
■Low VSWR in pass-
band
■Minimal maintenance
■Pass-through voltage
eliminated
■No sparkover or resid-
ual voltage concerns
■Ease of retro-fitting
antenna sights
Limitations
■Frequency specific
■Harmonic passband
■Does not allow DC bias
on transmission line
λ/4 Stub Tuners (Continued)
17
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Requirement Detail (Type-N, 7-16)
Electrical
Impedance 50Ω
VSWR Performance in Band ≤1.2:1
Insertion Loss (Typical) 0.2dB
DC Resistance (stub outer to inner) 1mΩ
Dynamic Voltage @ 250A/ms ≤15V
Residual Voltage @ 2500A, 8/20µs ≤15V
Outer Conductor Contact Resistance 10mΩ
DC Resistance (through-path center contact) 100mΩ
Materials
Body parts Brass
Gasket Silicone Rubber
Female contacts Beryllium Copper
Male Contacts Brass
Insulators P.T.F.E.
Environmental
Operating temperature range -45°C to +85°C
Relative humidity (non-condensing) up to 100%
Bandwidth ± 70 MHz
Center Frequency 1795 MHz
Contact Plating Silver
Body Plating Silver
Max Panel 10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Proof Torque 1.7Nm
Endurance 500 Matings
Recommended
Mounting Hole
62.9
[2.48]
25.4
[1.00]
Sq.
Ref.
16.0
[0.63] Dia.
23.5
[0.92]
Ref.
54.7
[2.15]
Ref.
13.6
[0.54]
42.0
[1.65]
Ref.
DCS 1800
Type N Clamp
Bulkhead Jack
Cable Part No.
T-Flex402 6329818-1
Bandwidth ± 70 MHz
Center Frequency 1795 MHz
Contact Plating Silver
Body Plating White Bronze
Max Panel 8.00mm
Compliant With CECC22190
Coupling Torque 25 - 30Nm
Proof Torque 35Nm
Endurance 500 Matings
Recommended
Mounting Hole
77.6
[3.06] Ref.
44.6
[1.76]
Ref.
67.0
[2.64]
Ref.
44.9
[1.77] 30.5
[1.20]
3.20
[0.13]
17.5
[0.69]
Dia.
Ref.
7-16 Jack to 7-16
Bulkhead Jack Adapter
Part Number
6361137-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
λ/4 Stub Tuners (Continued)
18
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Bandwidth ± 70 MHz
Center Frequency 1795 MHz
Contact Plating Silver
Body Plating Silver
Max Panel 10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Proof Torque 1.7Nm
Endurance 500 Matings
Recommended
Mounting Hole
62.9
[2.48] 23.5
[0.92]
Ref.
25.4
[1.00]
Sq.
42.0
[1.65]
Ref.
54.7
[2.15]
Ref. 16.0
[0.63]
13.6
[0.54]
Ref.
Dia.
DCS 1800 (Continued)
Type N Crimp
Bulkhead Jack
Cable Part No.
RG58C/U 1329819-1
PCS 1900
Bandwidth ± 70 MHz
Center Frequency 1920 MHz
Contact Plating Silver
Body Plating Silver
Max Panel 10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Proof Torque 1.7Nm
Endurance 500 Matings
Recommended
Mounting Hole
62.9
[2.48] 25.4
[1.00]
Sq.
Ref.
16.0
[0.63] Dia.
23.5
[0.92]
Ref.
52.9
[2.08]
Ref.
13.6
[0.54]
40.2
[1.58]
Ref.
Type N Clamp
Bulkhead Jack
Cable Part No.
T-Flex 402 1312137-1
Bandwidth ± 70 MHz
Center Frequency 1795 MHz
Contact Plating Silver
Body Plating Silver
Max Panel 10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Proof Torque 1.7Nm
Endurance 500 Matings
Recommended
Mounting Hole
57.3
[2.26] 25.4
[1.00]
Sq.
Ref.
16.0
[0.63] Dia.
23.5
[0.93]
Ref. 10.0
[0.39]
54.7
[2.15]
Ref.
13.6
[0.54]
42.0
[1.65]
Ref.
Type N Jack to Type N
Bulkhead Jack Adapter
Part Number
1361138-1
Bandwidth ± 70 MHz
Center Frequency 925 MHz
Contact Plating Silver
Body Plating White Bronze
Max Panel 8.00mm
Compliant With CECC22190
Coupling Torque 25 - 30Nm
Proof Torque 35Nm
Endurance 500 Matings
Recommended
Mounting Hole
77.6
[3.06]
44.9
[1.77]
Ref.
27.4
[10.8]
Ref.
93.4
[3.68]
Ref.
30.5
[1.20]
17.5
[0.69]
71.0
[2.79]
Ref.
Dia.
Dia.
Ref.
GSM
7-16 Bulkhead Jack to
7-16 Bulkhead Jack
Cable Part No.
T-Flex 402 Cable 6408399-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
λ/4 Stub Tuners (Continued)
19
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Bandwidth ± 70 MHz
Center Frequency 1920 MHz
Contact Plating Silver
Body Plating Silver
Max Panel 10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Proof Torque 1.7Nm
Endurance 500 Matings
Recommended
Mounting Hole
62.9
[2.48]
25.4
[1.00]
Sq.
Ref.
16.0
[0.63] Dia.
23.5
[0.92]
52.9
[2.08]
Ref.
13.6
[0.54]
40.2
[1.58]
Ref.
PCS 1900 (Continued)
Type N Crimp
Bulkhead Jack
Cable Part No.
RG58 C/U 6312139-1
Bandwidth 1920 MHz
Center Frequency ± 70 MHz
Contact Plating Silver
Body Plating Silver
Max Panel 8.00mm
Compliant With CECC 22190
Coupling Torque 25-30 Nm
Proof Torque 35 Nm
Endurance 500 Matings
Recommended
Mounting Hole
38.0
[1.50]
72.7
[2.86]
24.6
[0.97]
Ref.
4.00
[0.16]
Dia.
Ref.
27.4
[1.08]
Ref.
29.5
[1.16] Dia.
27.5
[1.08]
40.2
[1.58] Ref.
Ref.
Ref.
7-16 Clamp Bulkhead Jack
Cable Part No.
T-Flex402 6312123-1
Bandwidth 1920 MHz
Center Frequency ± 70 MHz
Contact Plating Silver
Body Plating White Bronze
Max Panel 8.00mm
Compliant With CECC 22190
Coupling Torque 25-30 Nm
Proof Torque 35 Nm
Endurance 500 Matings
Recommended
Mounting Hole
77.6
[3.06] Ref. 44.9
[1.77]
17.5
[0.69]
30.5
[1.20]
42.2
[1.66]
Ref.
64.6
[2.54]
Ref.
Dia.
Ref.
7-16 Bulkhead Jack to
7-16 Bulkhead Jack Adapter
Part Number
6312124-1
Bandwidth ± 70 MHz
Center Frequency 1920 MHz
Contact Plating Silver
Body Plating Silver
Max Panel 10.00mm
Compliant With CECC22210
Coupling Torque 0.7-1.1Nm
Proof Torque 1.7Nm
Endurance 500 Matings
Recommended
Mounting Hole
57.3
[2.26]
13.6
[0.54]
Ref. 25.4
[1.00]
Sq.
40.0
[1.58]
Ref.
52.7
[2.08]
Ref.
16.0
[0.63]
Dia.
Type N Bulkhead Jack to
Type N Bulkhead
Jack Adapter
Part Number
6361139-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
20
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors
The Tyco Electronics
N Connector, featuring a
15.88 [5/8] - 24 threaded
coupling for optimum
stability, is highly suited for
critical applications and
environments. This medium
sized connector can with-
stand shock and vibration to
assure a low noise level and
has a constant impedance
of 50 ohms. It also features
a captive center contact
and provides excellent per-
formance at frequencies up
to 11 GHz, with voltages to
1000 volts rms.
This Tyco Electronics con-
nector offers the added
benefits of low overall
applied cost with a labor-
saving two-crimp assembly.
The contact is simply
crimped to the cable’s
center conductor, then both
braid and cable support are
simultaneously crimped to
complete the termination.
N Series Connectors are
available in standard plug,
jack, panel jack, bulkhead
jack and right-angle plug
configurations. Those
connectors with a military
designation (M39012) are
furnished in accordance with
all
requirements of specifica-
tion MIL-C-39012, Class II,
Category B.
Materials
Brass —QQ-B-626
Beryllium Copper —QQ-C-530
Dielectric —TEFLON
TEFLON—MIL-P-19468
Copper, Annealed —QQ-C-576
Phosphor Bronze —QQ-B-750
Silicone Rubber —ZZ-R-765
Plating
Body—
Silver per QQ-S-365
Nickel per QQ-N-290
Center Contact —
Gold per MIL-B-45204
Electrical Characteristics
Nominal Impedance —50 ohms
Working Voltage —1000 volts, rms
at sea level
Frequency Range—0 to 11 GHz
Voltage Standing Wave Ratio
(VSWR) —
Straight Plug or Jack — 1.3:1 max.
Right-Angle Plug —
1.35 max. at 0 to 9.0 GHz
1.50 max. at 9.0 to 11.0 GHz
Contact Resistance —
Outer Contact—0.2 milliohms
Center Contact—1.0 milliohms
Right-Angle—2.5 milliohms
Insulation Resistance —5000
megohms min.
Dielectric Withstanding Voltage—
2500 Volts, rms at sea level
RF Leakage—MIL Type, -90 dB min.
at 2 to 3 GHz
RF Insertion Loss —MIL Type, 0.15
dB max. at 10 GHz
Right-Angle Plug, 0.3 dB max. at
10 GHz
Corona Level—MIL Type, 500 volts
min. at 21 336 m [70,000 ft.]
Terminator —
Resistance—50 ohms ±1%
Power Rating—1.0 watt max.
Product Facts
■Designated connectors are
MIL-C-39012, Class II,
Category B qualified
■Captive center contacts
■Completely crimpable
application – one hand tool
crimps all cables with
single or double braided
shields of a given size
■Impedance matching crimps
■Broad band performance –
low VSWR
■Superior cable retention
■TEFLON dielectric
■Silver or nickel finish
■Fully intermateable with
MIL-C-39012 connectors
■Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
■Recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E81956
■Certified by Canadian
Standards
Association
File No. LR 7189
R
R
R
Mechanical Characteristics
Mating/Unmating —Threaded cou-
pling
Cable Attachment—Crimp type -
center contact and braid
Coupling Nut Retention —445 N
[100 lbs.] min.
Cable Retention —400 N [90 lbs.]
min. RG 214/U Cable
Durability—500 cycles per MIL-C-
39012
Captive Contact —27 N [6 lbs.] min.
axial retention, either direction
Environmental Characteristics
Temperature Range —
MIL Type, -65°C to +165°C
Commercial, -55°C to +85°C
Vibration —MIL-STD-202, Method
204, Test Cond. B
Shock —MIL-STD-202, Method 213,
Test Cond. I
Moisture Resistance —MIL-STD-
202 Method 106
Salt Spray —MIL-STD-202, Method
101, Test Cond B
Temperature Cycling —MIL-STD-
202, Method 107, Test Cond. B
(except high temperature is +85°C)
Note: All data pertains to use with MIL-C-
39012 specified cables only.
Between Series Adapters
For N Series Between Series Adapters,
see pages 251-260.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
21
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
Plugs
M39012/
RG/U Termination Body Military No. and/ Dim. Integral Die Hex Across Flats Notes Part No.
Cable Type Plating or Comments LHand Tool Center Braid
O Crimp Nickel Knurl Collar 42.85 220045-2 — — 1 1-5225661-2
58, 58A, 1.687
58B, 58C O Crimp Silver Knurl Collar 42.85 220045-2 — — 1 5225361-1
1.687
O Crimp Nickel Knurl Collar 42.85 220045-2 — — 1 1-5225661-3
223, 1.687
55, 55A, 55B O Crimp Silver Knurl Collar 42.85 220045-2 — — 1 5225361-2
1.687
Knurl Collar 42.85 220045-2 — — 1, 3 5225392-2
142, 142A O Crimp Silver 1.687
142B, 400 42.85
Knurl Collar 1.687 220045-2 — — 1 5225361-4
O Crimp Nickel Knurl Collar 41.35 220045-2 — — 3 5225699-1
142, 142A 1.628
142B Knurl Collar 39.40 58436-1 1.73 5.41 25415232-4
Hex Crimp Nickel 1.550 .068 .213
115A,
BELDEN 89880, O Crimp Nickel Knurl Collar 42.85 220015-1 — — 3 5225092-8
9880 1.687
BELDEN 9880 Hex Crimp Nickel Knurl Collar 39.40 58485-1 2.54 10.90 21-415232-0
1.550 .100 .429
402 Semi Rigid Solder Nickel Knurl Collar 24.6 ————6057088-1
(.141) .970
405 Semi Rigid Solder Nickel Knurl Collar 24.6 ————6057094-1
(.085) .970
O Crimp Nickel Knurl Collar 42.85 220015-1 — — — 1-5227086-0
1.687
O Crimp Nickel Knurl Collar 42.85 220015-1 — — — 5225661-2
8, 8A, 213 1.687
O Crimp Silver 01B0007 42.85 220015-1 — — 3 51692-2
Knurl Collar 1.687
O Crimp Nickel Knurl Collar 47.22 220015-1 — — 3 5225662-2
1.859
11, 11A, 216 O Crimp Silver 01B0013 42.85 220015-1 — — 3 51692-4
Knurl Collar 1.687
BELDEN 9292 O Crimp Nickel — 47.22 220015-1 — — 3 1-5225662-8
1.859
393 Hex Crimp Nickel Hex Collar 39.40 58485-2 3.25 10.90 25414160-5
1.550 .128 .429
BELDEN 8214 O Crimp Nickel Knurl Collar 42.85 220015-1 — — — 1-5225661-6
1.687
O Crimp Nickel Knurl Collar 42.85 220015-1 — — — 5225661-1
9, 9A, 9B, 1.687
214 O Crimp Silver 01B0008 42.85 220015-1 — — 3 51692-1
Knurl Collar 1.687
9, 214 Hex Crimp Nickel Hex Collar 39.40 58485-1 2.54 10.90 25415232-7
1.550 .100 .429
LMR 240 Hex/Solder Silver Hex Collar 29.74 ——
6.81 —6274532-1
1.171 .268
Notes: 1Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used.
2Die Set Crimp Tool — PRO-CRIMPER II Hand Tool, P/N 354940-1 or 626 Series Pneumatic Tool with 679304-1.
3Weatherproof.
L
Max.
19.05
[.750]
Dia.
Max.
MIL Type
Dual Crimp
L
Max.
21.01
[.827]
Dia.
Max.
Semi-Rigid Cable
L
Max.
21.01
[.827]
Dia.
Max.
Hex
Dual Crimp
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
22
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
21.01
[.827]
Dia.
Max.
35.86
[1.412] Max.
L
Max.
Right-Angle Plugs,
Crimp
Jacks
L
Max.
15.93
[.627]
Dia.
Max.
M39012/
RG/U Termination Body Military No. and/ Dim. Integral Die Hex Across Flats Notes Part No.
Cable Type Plating or Comments LHand Tool Center Braid
58A, 58C Hex Crimp Nickel Hex Collar 57.79 58436-1 1.73 5.41 15415255-1
2.275 .068 .213
142, 142A, Hex Crimp Nickel Hex Collar 57.79 58436-1 1.73 5.41 15415255-2
142B 2.275 .068 .213
O Crimp Nickel Knurl Collar 57.79 220015-1 — — — 5225669-2
8, 8A, 213 2.275
O Crimp Silver 05B0002 57.79 220015-1 — — — 225014-2
Knurl Collar 2.275
8, 213 Hex Crimp Nickel Hex Collar 57.79 58485-1 2.54 10.90 15415255-3
2.275 .100 .429
393 O Crimp Silver Knurl Collar 62.31 220015-1 — — 1,3 225389-6
2.453
O Crimp Nickel Knurl Collar 57.79 220015-1 — — — 5225669-1
9, 9A, 9B 2.275
214 O Crimp Silver 05B0003 57.79 220015-1 — — — 225014-3
Knurl Collar 2.275
9, 214 Hex Crimp Nickel Hex Collar 57.79 58485-1 2.54 10.90 15415255-4
2.275 .100 .429
Notes: 1Die Assembly compatible with Crimp Tool — PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit
1725837-1, or SDE Electric Terminator 1490076-2.
3Weatherproof.
M39012/
RG/U Termination Body Military No. and/ Dim. Integral Die Hex Across Flats Notes Part No.
Cable Type Plating or Comments LHand Tool Center Braid
58A, 58C O Crimp Nickel — 44.83 220045-2 — — 2, 3 1-5225664-2
1.765
142, 142A, Hex Crimp Nickel — 41.28 58436-1 1.73 5.41 25415242-2
142B 1.625 .068 .213
8, 8A, O Crimp Silver 02B0008 49.20 220015-1 — — 3 225093-2
213 1.937
8, 213 O Crimp Nickel — 49.20 220015-1 — — 2, 3 5225664-2
1.937
9, 9A, 9B, O Crimp Silver 02B0009 49.20 220015-1 — — — 225093-1
214 1.937
9, 214 O Crimp Nickel — 49.20 220015-1 — — 2, 3 5225664-1
1.937
393 Hex Crimp Nickel — 41.28 58485-1 2.54 10.90 25415242-6
1.625 .100 .429
402 Semi Solder Nickel — 26.70 ————6057116-1
Rigid (.141) 1.051
Notes: 1Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used.
2 Die Assembly compatible with Crimp Tool — PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit
1725837-1, or SDE Electric Terminator 1490076-2.
3 Weatherproof.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
23
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
Bulkhead Jacks,
Crimp
13.51/13.79
[.532/.543]
16/16.38
[.630/.645]
Dia.
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
L
Max.
Dia.
Max.
22.48
[.885]
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
16.26
[.640 ] Dia.
+0.13
-0.25
+.005
-.010
13.72
[.540 ]
+0.08
-0.2
+.003
-.008
12.88
[.507 ] Dia.
+0.08
-0.05
+.003
-.002
5.59
[.220 ]
+0.03
-0.05
+.001
-.002
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
M39012/
RG/U Termination Body Military No. Dim. Integral Die Part No.
Cable Type Plating and/or L Hand Tool
Comments
Crimp Nickel Rear Mount 29.37 *228658-1
1.156
402 Solder Pass. Gold Rear Mount — * 6057159-1
Semi-Rigid/.141
Solder Nickel Rear Mount 25.4 —6057176-1
1.00
405 Solder Nickel Rear Mount 33.9 —6057165-1
Semi-Rigid/.085 1.335
*Tooling—Hand Tool No. 59980-1, Requires (2) Crimping Dies No. 312253-1 and (1) Locator No. 220220-2.
Bulkhead Jacks for
Semi-Rigid Cable
22.86
[.900]
Dia.
Max.
L
Max.
16.1
[.630]
Dia.
Max.
L
Max.
Rear Mount
Hex Across Flats
RG/U Termination Body Dim. Integral Die Notes Part No.
Cable Type Plating L Hand Tool Center Braid
58, 58A, 58B, O Crimp Silver 49.61 220045-2 — — 1 5225363-1
58C, LMR195 1.953
58A, 58C Hex Crimp Nickel 45.72 58436-1 1.73 5.41 25415248-1
1.800 .068 .213
142, 142A, Hex Crimp Nickel 45.72 58436-1 1.73 5.41 25415248-7
142B 1.800 .068 .213
124, 140, 210, 62,
62A, 62B, 59, 59A, O Crimp Nickel 49.61 220045-3 — — — 1-5225667-6
59B, BELDEN 9291, 1.953
9209, 9269, 89269
8, 213 O Crimp Silver 53.98 220015-1 — — 2, 3 225094-2
2.125
393 O Crimp Nickel 53.98 220015-1 — — 2, 3 1-225668-1
2.125
9, 214 O Crimp Silver 53.98 220015-1 — — 2, 3 225094-1
2.125
Notes: 1Hand Tool 69710-1, with Die Insert 220062-1, is available to terminate these connectors. The 626 Pneumatic tool system can also be used.
2Die Assembly compatible with Crimp Tool — PRO-CRIMPER III Hand Tool, P/N 354940-1, 626 Series Pneumatic Tool 1213855-1, SDE Battery Tool Kit
1725837-1, or SDE Electric Terminator 1490076-2.
3Weatherproof.
Front Mount
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
24
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
16.25
[.640]
3.17 [.125] Dia.
(4 Holes) Min.
18.24 ±.013
[.718 ±.005]
18.24 ±.013
[.718 ±.005]
Recommended
Panel Cutout
Panel Jacks, Solder
Panel Plug, Solder
Jack, Panel Mount
Hex Across Flats
RG/U Termination Body Dim. Integral Die Notes Part No.
Cable Type Plating L Hand Tool Center Braid
58A, 58C Hex Crimp Nickel 41.28 58436-1 1.73 5.41 —5415252-1
1.625 .068 .213
142, 142A, Hex Crimp Nickel 41.28 58436-1 1.73 5.41 —5415252-2
142B 1.625 .068 .213
8, 213 Hex Crimp Nickel 41.28 58485-1 2.54 10.90 —5415252-3
1.625 .100 .429
9, 214 Hex Crimp Nickel 41.28 58485-1 2.54 10.90 —5415252-4
1.625 .100 .429
RG 225 O Crimp Silver 49.20 220015-1 — — 3 5225089-4
1.937
Note: 3Weatherproof.
Body Plating Part No.
Nickel 1057284-1
Nickel 1057290-1*
*No solder cup — dielectric protrudes.
Body Plating Part No.
Nickel 1057275-1
Nickel 1057279-1*
Nickel 1057277-1*
*No solder cup — dielectric protrudes.
25.40
[1.000]
L
Max.
Dia.
Min.
25.0
[.986]
18.7
[.736]
2.0
[.080]
25.4
[1.000] Sq.
9.6
[.377] Ref.
18.2
[.718]
Typ.
Ø 3.2
[.125]
Dia.
3.0
[.120]
Dia.
2.5
[.098]
Dia.
4 Plcs.
27.2
[1.070]
20.8
[.819]
2.0
[.080]
25.4
[1.000] Sq.
18.2
[.718]
Typ.
Ø 3.2
[.125]
Ø 2.5
[.098]
Ø 3.0
[.120]
4 Plcs.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
25
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
N Series Connectors, 50 Ohm (Continued)
Inter-Series Adapters
Feedthru Jack Adapter
(Jack-Jack)
Plating
Body — Nickel
Dielectric — General purpose
polypropylene
Contact — Gold plated
Part Number
227945-2
Dia.
Max.
15.93
[.627]
Max.
45.22
[1.780]
Type Body Contact Dielectric Part No.
Plating
Jack-Plug Stainless steel/ Gold TEFLON 1057374-1
passivate
50.69
[1.996]
Jack-Plug
Panel Mount Jack,
Press-Fit
Panel Mount Jack,
Screw-In
Body Contact Dielectric Part No.
Plating
White bronze Gold PTFE 1460055-1
Body Contact Dielectric Part No.
Plating
White bronze Gold PTFE 1460118-11
White bronze Gold PTFE 1460118-22
White bronze Gold PTFE 1460118-33
Notes: 1. Without TUF-LOC Adhesive
2. With TUF-LOC Adhesive around M3 thread
3. With TUF-LOC Spot on M3 thread
2.50 ± 0.10
[.098 ± .004]
6.00 ± 0.10
[.236 ± .004]
Ø 15.80 ± 0.10
[.622 ± .004]
Ø 14.35 ± 0.05
[.565 ± .002]
5/8-24
UNEF-2A
5.15 ± 0.20
[.203 ± .008]
24.80 ± 0.20
[.976 ± .008]
8.70 ± 0.30
[.343 ± .012]
+ 0.09
– 0.05
+ .004
– .002
9.10
[.358 ]
19.00 ± 0.10
[.748 ± .004]
Hex.
23.30 ± 0.20
[.917 ± .008]
5.00 ± 0.10
[.197 ± .004]
16.30 ± 0.20
[.642 ± .008]
M16 x 1
Ø 14.90 ± 0.10
[.587 ± .004]
5/8-24
UNEF-2A
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
26
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Quick Lock N (QLN) Series Connectors
RF Coax Connectors
Product Facts
■Similar performance and
applications to standard
N Series
■Time saving and user
friendly snap on/off mating
■Excellent performance to
6 GHz
■No torquing of connector
required
■Free rotation of mated
connection
■Higher packaging density
can be achieved
■Fully compatible with
Huber&Suhner and Radiall
QN Series QLF®connectors*
* QN and QLF are registered trademarks of Huber&Suhner, Inc. and Radiall S.A..
Huber&Suhner, Inc. and Radiall S.A. are not affiliated with the QLN product.
Description
Snap-on version of the pop-
ular N Series connector
■Snap-on interface
facilitates assembly
■Same dependable
performance as standard
N connector
Applications
■Cellular & PCS Base
Stations
■Broadcast equipment
■Telephony applications,
WLAN
■Instrumentation and
remote measuring
equipment
■Mil Aero, SatCom, Radar
Related Product Data
Internet — http://tycoelectronics.com/products/rfcoax
Product Specification/Design Objectives —
108-2281
Material and Finish
Shell — Brass, plated white bronze
Male Pin Center Contact — Brass,
plated gold
Female Socket Center Contact —
Beryllium copper, plated gold
Outer Contact — Phosphor bronze,
plated white bronze
Insulators — PTFE or PFA
Electrical Characteristics
Characteristic Impedance —
50 ohms
Frequency Range — DC to 6 GHz
Voltage Standing Wave Ratio
(VSWR) —
1.12 max. DC to 3 GHz
Insertion Loss —
0.15 dB max. DC to 3 GHz
Rated Voltage — 1000 VAC rms,
50 Hz (at sea level)
Insulation Resistance —
5000 megohms min.
Contact Resistance —
Center Contact — 1.5 milliohms max.
Outer Contact — 1.5 milliohms max.
Mechanical Characteristics
Engagement Force — 30 N typical
Disengagement Force — 30 N typical
Interface Retention Force —
450 N min.
Contact Captivation — 28 N min.
Durability — 100 cycles min.
Environmental Characteristics
Operating Temperature —
–40°C to +125°C (cable dependent)
Thermal Shock —
IEC 60169 para. 16.4
Corrosion — MIL-STD-202, Method
101, Condition B
Vibration — IEC-1169-1 para. 9.3.3
(10-500 Hz, 5g)
IP Rating for Interface —
IP68 (connector dependent)
27
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Quick Lock N (QLN) Series Connectors (Continued)
RF Coax Connectors
Semi-Rigid Cable —
Direct Solder Attachment
Straight Cable Plug
Cable Part No.
RG 402 1274805-1
34.29
[1.35] Ref.
Bulkhead Cable Jack
Cable Part No.
RG 402 1274806-1
38.10
[1.50] Ref.
Flexible Cable —
Crimp Attachment
Straight Cable Plug Cable Part No.
RG 58 1274688-1
RG 142 1274688-2
LMR 240 1274688-3
30.48
[1.20] Ref.
Right-Angle Cable Plug
Cable Part No.
RG 58 1274804-1
RG 142 1274804-2
LMR 240 1274804-3
36.58
[1.44] Ref.
Bulkhead Cable Jack
Cable Part No.
RG 58 1274734-1
RG 142 1274734-2
LMR 240 1274734-3
34.54
[1.36] Ref.
4-Hole Square Flange
Cable Jack Cable Part No.
RG 58 1274735-1
RG 142 1274735-2
LMR 240 1274735-3
34.54
[1.36] Ref.
Straight Cable Jack
Cable Part No.
RG 58 1274689-1
RG 142 1274689-2
LMR 240 1274689-3
26.92
[1.06] Ref.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
28
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Quick Lock N (QLN) Series Connectors (Continued)
RF Coax Connectors
Panel Mount Receptacles
Press-Fit Bulkhead Jack
Receptacle — Solder Terminal
Part Number
1274807-1
20.07
[.790] Ref.
Ø 15.24
[.600] Ref.
4-Hole Flange Jack
Receptacle — Solder Terminal
Part Number
1274662-1
24.89
[.980] Ref. 17.53
[.690]
Sq.
Ref.
20.07
[.790] Ref.
Adapters — Between Series
QLN Plug to N Series Jack
Part Number
1274808-1
41.91
[1.65]
9.53
[.375]
Ref.
N Series Jack QLN Plug
Wrench Flats
Ø 18.42
[.725] Ref.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
29
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors
The Tyco Electronics
TNC RF connector family,
with 7/16-28 threaded cou-
plings, provides low noise
levels and optimum stability,
and can withstand the
shock and vibration often
present in hostile environ-
ments.
Available in both 50 and
75 ohm versions, these
connectors feature numer-
ous styles including cable
plugs and jacks, adapters
and printed circuit board
connectors. These connec-
tors accept a wide range of
coaxial cables and are
intermateable with industry
standard connectors
designed to MIL-C-39012
specifications.
Single crimp connectors
provide reduced applica-
tion time and lower applied
costs. This is accomplished
by using Tyco Electronics
one-crimp operation tooling
which simultaneously termi-
nates the inner conductor,
outer braid and cable
support with one controlled
stroke.
Tyco Electronics can also
supply low-cost alternatives
with a commercial type
product line. These connec-
tors are designed around
the mil-specifications, offer-
ing comparable mechanical
and electrical performance.
Product Facts
Hex Crimp and O Crimp
Connectors
■50 and 75 ohm commercial
versions available
■Provides excellent perfor-
mance at frequencies up
to 7 GHz
■Low cost commercial type
available
■Commercial type is smaller
and lighter weight
■Tarnish resistant nickel
finish
■Choice of dielectric
materials
■Standard and weatherproof
versions available
■Plugs available for high
temperature cable
Single Crimp Connectors
■Fast application–one
crimping operation
terminates inner conductor,
outer braid and cable
support
■Low application cost
Connectors for
Semi-Rigid Cable
■Crimp and solder versions
available
■Standard cable stripping
dimensions
■Universal cable termination
common to all
configurations
Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
PC Board connectors are
recognized under the
Component Program of
Underwriters
Laboratories Inc.,
File No. E81956
Certified by Canadian
Standards Association
File No. LR 7189
R
R
R
Related Product Data
Military Category — All crimp
connectors are Category B Type
(Tyco Electronics Crimp Tooling), unless
otherwise noted.
Packaging — All Mil-Type connectors
are packaged individually and all
Commercial connectors are bulk pack-
aged unless otherwise noted.
Between Series Adapters
For TNC Between Series Adapters,
see pages 251-260.
30
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors (Continued)
Single Category B Commercial Commercial
Characteristics Crimp O Crimp O Crimp Commercial Solder Semi-Rigid Solder
(MIL Type) (MIL Type) & Hex Crimp PCB Jacks Clamp
50 & 75 Ohm
Electrical
Impedance, Nom. 50 50 50 50 50 50 50
(Ohms)
Working Voltage 500 500 500 500 500 335 500
(Volts RMS)
Contact Resistance Inner: 1.5 Inner: 1.5 Inner: 2.0 Inner: 6.0 Inner: 2.75 Inner: 1.5 Inner: 1.5
(Milliohms) Outer: 3 Outer: 0.2 Outer: 0.3 Outer: 3.0 Outer: 1.0 Outer: 0.2 Outer: 0.2
Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000
(Megohms)
Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500
Voltage (VAC)
Corona Level at 70,000 ft. 5 max. 5 max. 5 max. ——
5 max. 5 max.
(Picocoulombs) @ 375 VRMS @ 375 VRMS @ 375 VRMS @ 375 VRMS @ 375 VRMS
RF Leakage, Max. —60 @ 55 @ ——
60 @ 55 @
(dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz
RF Insertion Loss, —0.18 @ 0.2 @ ——
0.06 @ 0.2 @
Max. (dB) 9 GHz 3 GHz 3-6 GHz 3 GHz
Frequency Range 0-4 0-11 0-7 0-4 0-4 0-15 0-11
(GHz)
VSWR in Frequency 1.35 1.3 1.40 — — 1.35 1.30 @
Range Max. 4 GHz
Mechanical
Force to Engage/ 10/2 2/2 6/6 — — 2 2
Couple, lbs. [N] [44.5/8.9] [8.9/8.9] [26.7/26.7] [.023] [.023]
Coupling Nut Retention, 100 100 60 ——
100 100
Min. lbs. [N] [444.8] [444.8] [266.9] [444.8] [444.8]
Cable Retention, 60 [266.9] 60 [266.9] 60 [266.9] 60 [266.9] —60 40
lbs. [N] RG 58C/U RG 58C/U RG 58C/U (PCB Ret) [266.9] [178.0]
Durability (Cycles) 500 500 500 500 500 500 500
Jam Nut Mounting Torque, 25 25 25 25 25 25 25
Max. lbs. [N•m] [2.8] [2.8] [2.8] [2.8] [2.8] [2.8] [2.8]
Environmental
Temperature Range, -65 to +85 -65 to +1651-55 to +85 -55 to +85 -65 to +165 -65 to +105 -65 to +165
Operating (C°) -55 to +852
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202
Vibration Method 204 Method 204 Method 204 Method 201A Method 204 Method 202 Method 202
Cond. B Cond. B Cond. B Cond. A Cond. B Cond. B Cond. B
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202
Physical Shock Method 213 Method 213 Method 213 Method 213 Method 213 Method 213 Method 213
Cond. G, (50 G’s) Cond. I, (100 G’s) Cond. I, (100 G’s) Cond. I, (100 G’s) Cond. I, (100 G’s) Cond. I Cond. I
MIL-STD-202 MIL-STD-202 MIL-STD-20 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202
Thermal Shock Method 107 Method 107
Method 107 Cond. B Cond. A Method 107 Method 107 Method 107 Method 107
Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202
Method 106
Resistance Method 106 Method 106 Type II Method 106 Method 106 Method 106 Method 106
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202
Salt Spray Method 101 Method 101 Method 101 Method 101 Method 101 Method 101 Method 101
Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B
Product —108-12001 108-12046 — — 108-12032 —
Specification
1Assembled to cable with polytetrafluorethylene dielectric.
2Assembled to cable with polyethylene dielectric.
Specifications
31
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors (Continued)
Single Category B Commercial Commercial
Characteristics Crimp O Crimp O Crimp Commercial Solder Semi-Rigid Solder
(MIL Type) (MIL Type) & Hex Crimp PCB Jacks Clamp
50 & 75 Ohm
Connector Material
Collar Brass Brass Brass ——
Brass Brass
QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626
Phos. Bronze Phos. Bronze
Outer Contact QQ-B-750 QQ-B-750 Brass ——
Brass Brass
(Plug) Beryl. Copper Beryl. Copper MIL-C-21768 QQ-B-626 QQ-B-626
QQ-C-530 QQ-C-530
Outer Contact Brass Brass Zinc Zinc Zinc Brass Brass
(Jack) QQ-B-626 QQ-B-626 QQ-Z-363 QQ-Z-363 QQ-Z-363 QQ-B-626 QQ-B-626
Polyethylene TEFLON
Dielectric TEFLON TEFLON Polypropylene Polypropylene MIL-P-19468 TEFLON TEFLON
MIL-P-19468 MIL-P-19468 Gen. Purpose Gen. Purpose1Polyester PBT MIL-P-19468 MIL-P-19468
MIL-P-24519
Center Contact Brass Brass Brass ——
Brass Brass
(Plug) QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626 QQ-B-626
Center Contact Beryl. Copper Beryl. Copper Beryl. Copper Phos. Bronze Phos. Bronze Beryl Copper Beryl Copper
(Jack) ASTM-B-643, ASTM-B-643,
QQ-C-530 QQ-C-530
QQ-C-530 QQ-B-570 QQ-B-570 QQ-C-530 QQ-C-530
Gasket Silicon Rubber Silicon Rubber Silicon Rubber ——
Silicone Rubber Silicone Rubber
QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765
Ferrule Copper Copper Copper ————
QQ-C-576 QQ-C-576 QQ-C-576
Connector Primary Finishes2
Collar Silver Silver Bright Nickel ——
Nickel Nickel
QQ-S-365 QQ-S-365 QQ-N-290 QQ-N-290 QQ-N-290
Outer Contact Silver Bright Nickel Bright or Bright Nickel Bright Nickel Nickel Nickel
(Plug & Jack) QQ-S-365 QQ-N-290 Matte Nickel QQ-N-290 QQ-N-290 QQ-N-290 QQ-N-290
QQ-N-290
Tin Lead, Tin Lead, Tin Lead,
Center Contact Gold Silver ASTM-B-545 ASTM-B-545 ASTM-B-545 Gold Gold
(Plug & Jack) MIL-G-45204 QQ-S-365 Silver, QQ-S-365 Silver, QQ-S-365 Silver, QQ-S-365 MIL-G-45204 MIL-G-45204
Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204
Ferrule Silver Gold Tin Lead ————
QQ-S-365 MIL-G-45204 ASTM-B-5
1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519.
2If several finishes are listed, refer to individual catalog page(s) or customer drawings for exact specifications.
Specifications (Continued)
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
32
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm
Interchangeable
CERTI-CRIMP Dies for
RG/U Termination Center Body Dim. Hand Tool PRO-CRIMPER
Contact Dielectric Style Hand Tool Part No.
Cable Type Plating Plating L with 354940-1 or
Comments
Integral Die PRO-CRIMPER
Adapter 679304-1
174, 188, Hex Crimp Gold Nickel Polypropylene Commercial — 31.24 —58436-3 5222506-5
188A, 316 1.230
179, 179A, 179B 31.24
161, 187, 187A Hex Crimp Gold Nickel Polypropylene Commercial — — 58436-3 5222506-6
BELDEN 9221 1.230
Hex Crimp Gold Nickel Polypropylene Commercial — 31.25 —58436-115222506-1
58, 58A, 58B, 58C 1.230
O Crimp Gold Nickel TEFLON MIL Type Weatherproof 34.93 220045-2 — 5225555-2
1.375
142, 142A O Crimp Gold Nickel TEFLON MIL Type Weatherproof 34.93 220045-2 — 5225555-6
142B, 400 1.375
8, 8A, 213 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 50.8 220015-1 — 5225555-7
2.000
O Crimp Gold Nickel TEFLON MIL Type Weatherproof 50.8 220015-1 — 5225555-8
9, 9A, 9B, 214 2.000
1Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
Plugs, Crimp
13.21 Dia.
[.520] Max.
L
Max.
MIL Type
O Crimp
Weatherproof
Hex Crimp and
O Crimp
16.26 Dia.
[.640] Max. L
Max.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
33
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
16.26 Dia.
[.640] Max. 23.4
[.921]
Max.
Plugs for Semi Rigid-Cable
19.6
[.770]
16.5
[.650]
Dia.
Max.
A
Dia.
B
Dia.
Ref.
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating A B 354940-1 or & 626 Pneu.
Comments
PRO-CRIMPER Head 318161-1
Adapter 679304-1
405 Solid 2.3 3.0
Semi-Rigid/ Solder Gold Passivate PTFE MIL Type — .089 .120 —31057635-1
2.18 [.086]
402 Weather
Semi-Rigid/ Crimp Gold Nickel TEFLON Commercial proof —12
228179-3
3.66 [.141]
RG 402/U Solid 3.7 4.6
.141 Solder Gold Gold PTFE MIL Type — .144 .180 —31057631-1
3.66 [.141]
1Hand Tool 59980-1, Requires (2) Crimping Dies 312253-1 and (1) Locator 312644-1.
2Pneumatic Tool 58318-1, Requires (2) Crimping Dies 313720-1 and (1) Locator 312645-1.
3Refer to Recommended Assembly Tools in Tool Section.
Crimp Type
Solder Type
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
34
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Right-Angle Plugs,
Crimp
Interchangeable
Dies for
RG/U Termination Center Body Dim. CERTI-CRIMP PRO-CRIMPER
Contact Dielectric Style Hand Tool Hand Tool Part No.
Cable Type Plating Plating L with 354940-1 or
Comments
Integral Die PRO-CRIMPER
Adapter 679304-1
174, 174A, 188 O Crimp Gold Nickel Polymethyl- Commercial — 38.23 —318450-2 5414173-3
188A, 316 pentene 1.505
58, 58A, 58B O Crimp Gold Nickel TEFLON MIL Type Weatherproof 47.63 220045-2 — 5225559-2
58C 1.875
55, 55A, 55B O Crimp Gold Nickel Polymethyl- Commercial — 38.23 —220189-1 5414173-6
223 pentene 1.505
142, 142A, 142B
O Crimp Gold Silver TEFLON MIL Type Weatherproof 47.63 220045-2 — 5225554-6
400 1.875
8, 8A, 213 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 63.5 220015-1 — 5225559-8
2.500
393, 225 O Crimp Gold Silver TEFLON MIL Type Weatherproof 63.5 220015-1 — 1-5225554-1
2.500
9, 9A, 9B, 214 O Crimp Gold Silver TEFLON MIL Type — 59.52 220015-1 — 5225349-9
2.343
O Crimp MIL Type
O Crimp
Weatherproof
16.26 Dia.
[.640] Max.
31.75
[1.250]
L
Max.
13.21 Dia.
[.520]
L
Max.
27.43
[1.080] Max.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
35
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Jacks, Crimp
Interchangeable
Dies for
RG/U Termination Center Body Dim. CERTI-CRIMP PRO-CRIMPER
Contact Dielectric Style Hand Tool Hand Tool Part No.
Cable Type Plating Plating L with 354940-1 or
Comments
Integral Die PRO-CRIMPER
Adapter 679304-1
174, 174A, 188 O Crimp Gold Nickel Polymethyl- Commercial — 30.48 —318450-2 5414171-3
188A, 316 pentene 1.200
58, 58A, 58B O Crimp Gold Silver TEFLON MIL Type 35.72 220045-2* — 225551-2
58C Weatherproof 1.406
141, 141A, 303 O Crimp Gold Silver TEFLON MIL Type 35.72 220045-2* — 225551-5
Weatherproof 1.406
55, 55A, 55B
O Crimp Gold Nickel Polymethyl- Commercial — 29.85 —220189-1 414171-6
223 pentene 1.175
142, 142A, 142B
O Crimp Gold Silver TEFLON MIL Type Weatherproof 35.72 220045-2* — 225551-6
400 1.406
*Battery, Pneumatic
MIL Type
O Crimp
Weatherproof
O Crimp
L
Max.
11.43 Dia.
[.450] Max.
11.43 Dia.
[.450] Max.
L
Max.
Jacks, Solder/Clamp
33.3
[1.31]
14.3
[.562] Dia.
12.7
[.500] A/F 11.1
[.437] A/F
RG/U Termination Center Body
Cable Type Contact Plating Dielectric Style Part No.
Plating
RG 58C/U, Solder/Clamp Gold Silver TEFLON MIL Type 1312569-1
RG 141 A/U
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
36
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Bulkhead Jacks, Crimp
Interchangeable
Dies for
RG/U Termination Center Body Dim. CERTI-CRIMP PRO-CRIMPER
Contact Dielectric Style Hand Tool Hand Tool Part No.
Cable Type Plating Plating L with 354940-1 or
Comments
Integral Die PRO-CRIMPER
Adapter 679304-1
174, 174A, 316
O Crimp Gold Nickel Polymethyl- Commercial — 34.93 —318450-2 5414168-3
188, 188A pentene 1.375
179, 179A, 179B 38.1
161, 187, 187A Single Gold Nickel TEFLON MIL Type — 1.500 —91910-1 5331238 -
BELDEN 9221 Crimp
RD 188, 316 O Crimp Gold Nickel Polymethyl- Commercial — 34.93 —58539-1 5414168-4
Double Braid pentene 1.375
58, 58A, 58B, 58C
O Crimp Gold Nickel Polymethyl- Commercial — 34.93 —220189-1 5414168-1
141, 141A, 303
pentene 1.375
223 Polymethyl- 34.93
55, 55A, 55B O Crimp Gold Nickel pentene Commercial — 1.375 —220189-1 5414168-6
O Crimp Gold Nickel Polymethyl- Commercial — 34.93 —220189-1 5414168-5
142, 142A pentene 1.375
142B, 400 O Crimp Gold Nickel TEFLON MIL Type Weatherproof 38.1 220045-2 — 5225557-6
1.500
Single Crimp O Crimp
Maximum Panel Thickness Single Crimp 3.18 [.125];
Dual Crimp 6.35 [.250]
Recommended
Panel Cutout
H= 11/16 [.6875] max. across flats, 20.32 [.800] max. across points.
HL
Max.
HL
Max.
5.54
[.218 ]
+.008
-.000
+0.03
-0.00
12.83 Dia.
[.505 ]
+.013
-.000
+0.05
-0.00
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
37
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Maximum Panel Thickness 6.35 [.250]
Recommended
Panel Cutout
5.54
[.218 ]
+.008
-.000
+0.03
-0.00
12.83 Dia.
[0.505 ]
+.013
-.000
+0.05
-0.00
H= 17.45 [.687] max. across flats, 20.32 [.800] max. across points.
H
L
Max.
30.5
[1.200]
12.1
[.475]
Min.
12.7
[.500]
A
Dia.
B
Dia.
Recommended
Panel Cutout
Dia.
Min.
6.40
[.250]
Max.
Panel
Ref.
15.9
[.625] Hex. 19.1
[.750] Hex.
20.9
[.821]
RG/U Termination Center Body Dim.
Cable Type Contact Plating Dielectric Style LPart No.
Plating
402 Crimp Gold Nickel TEFLON MIL Type 25.4 228502-1Semi-Rigid/ 1.000
3.66 [.141]*
*Tooling—Hand Tool 59980-1, Requires (2) Crimping Dies 312253-1 and (1) Locator 220220-2.
RG/U Termination Center Body Dim. Dim.
Cable Type Contact Plating Dielectric Style AB
Part No.
Plating
RG 402/U Solder Gold Pass. Stainless Solid PTFE MIL Type 3.7 4.6 1057676-1
3.66 [.141] Steel .144 .180
RG 405/U Solder Gold Pass. Stainless Solid PTFE MIL Type 2.3 3.0 1057679-1
2.16 [.085] Steel .089 .120
Bulkhead Jacks for
Semi-Rigid Cable,
Rear Mount
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
38
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Panel Jacks, Crimp
Recommended
Panel Cutout
12.7 ±0.1
[.500 ±.004 ]
12.7 ±0.1
[.500 ±.004 ]
11.2 Dia.
[.441] Min.
2.71 Dia.
[.107] Min.
Clearance for
3-56 Screws
(4 Holes)
17.86 Sq.
[.703] Max.
L
Max.
22.9
[.900]
16.3
[.642]
14.3
[.562] A
Dia.
B
Dia.
17.5
[.687]Sq.
12.7
[.500]
Typ.
3.20
[.125]
Dia.
4 Plcs.
Center CERTI-CRIMP
RG/U Termination Contact Body Dielectric Style Dim. Hand Tool Part No.
Cable Type Plating Plating L With
Integral Die
58, 58A, Crimp Gold Silver TEFLON MIL Type 34.93 220045-2 225348-2
58B, 58C 1.375
RG/U Termination Center Body Dim. Dim.
Cable Type Contact Plating Dielectric Style AB
Part No.
Plating
RG 402/U Solder Gold Gold TEFLON MIL Type 3.7 4.6 1057697-1
3.66 [.141] .144 Min. .180
RG 405/U Solder Gold Gold TEFLON MIL Type 2.3 3.0 1057699-1
2.16 [.085] .089 Min. .120
Panel Jacks for
Semi-Rigid Cable
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
39
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
(Top View)
B34.93
[1.375]
Mtg. Hgt.
1/2-28 Thread
15.88
[.625]
C
L
AB34.93
[1.375]
1/2-28 Thread
15.88
[.625]
Mtg. Hgt.
Vertical PC Board/
Panel Mount Jacks VALOX Body
Right-Angle PC Board/
Panel Mount Jacks
*2-56 Self-Tapping Screws:
For 1.57 [3/32] or greater panel thickness
Part No. 221108-2
For less than 1.57 [3/32] panel thickness
Part No. 221108-4
VALOX Body
C
L
AB34.93
[1.375]
15.88
[.625]
Mtg. Hgt.
Metal Body
5.54
[.218 ]
+.008
-.000
+0.03
-0.00
12.83
[.505 ]
Dia.
+0.13
-.000
+0.05
-0.00
Maximum Panel Thickness 6.1 [.240]
Recommended
Panel Cutout
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
Mating
Face
(Top View)
5.08 ± 0.05
[.200 ± .002]
2.54 ± 0.05
[.100 ± .002]
10.16 ± 0.08
[.400 ± .003]
5.08 ± 0.05
[.200 ± .002]
GS0.89 ± 0.08
[.035 ± .003]
(2 Holes)
Dia.
2.01 ± 0.08
[.079 ± .003]
(2 Holes)
Dia.
G
Recommended PC Board Layout
Center Dimensions
Body Contact Part Numbers
Material Plating AB
VALOX, White 50 Gold 8.56 21.21 5227818-1
.337 .835
Metal 50 Gold 8.26 20.83 5227839-1
.325 .820
Body Center Contact Dimension Part Number
Material Plating B
VALOX, White Gold 21.21 5227820-1
.835
Recommended PC Board Layout
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
10.16 ±0.08
[.400 ±.003]
GS
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08 Dia.
[.035 ±.003]
(2 Holes)
10.16 ±0.08
[.400 ±.003]
2.01 ±0.08 Dia.
[.079 ±.003]
(2 Holes)
1/2-28 Thread
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
40
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
Right-Angle PC Board/
Mount Jacks
Plating
Body—Nickel
Center Contact —Gold
Dielectric —TEFLON
Bulkhead Solder Jacks
9.65 Dia.
[.380 ]
+0.13
-.000
+.005
-.000
3.96 Dia.
[.156 ]
+0.08
-.000
+.003
-.000
Panel Thickness Refer to chart below.
Recommended
Panel Cutout
(Jack)
Part No. 5413933-1
10.93
[.430]
Max.
0.89
[.035]
0.89
[.035]
Max.
11.43
[.450]
4.04 Max.
[.159]
9.53
[.375]
14.86
[.585]
10.97 ±0.08
[.432 ±.003]
11.56 ±0.08 Dia.
[.455 ±.003]
Insulation Bushing
Material—Nylon
Part No. 227223-1
Recommended Panel Cutout
(Bushing)
L
Max.
13.09 Dia.
[.515] Max.
Accepts 1.5
Dia. Max. Wire
[.059]
2.74
[.108]
2 Holes
Dia.
6.60
[.260] 5.59
[.220]
3.43
[.135]
2 Holes
Dia.
3.30
[.130]
8.26
[.325]
16.51
[.650]
3.30
[.130]
1.27
[.050]Dia. 2.79
[.110]
2.29
[.090]
2 Holes
Dia.
6.60
[.260]
23.62
[.930]
28.98
[1.141]
Recommended PC Board Cutout
Center
Body Contact Dielectric Dim. Panel Part Number
Plating Plating LThickness
Nickel Gold 33.33 1.17-6.35 5227764-2
VALOX 1.312 .046-.250
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
VALOX is a trademark of General Electric
Company.
41
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 50 Ohm (Continued)
12.96 Dia.
[.510] Max.
36.2 Max.
[1.425]
40.14 Max.
[1.580]
5.54
[.218 ]
+0.08
-.000
+.003
-0.00
12.83
[.505 ]
Dia.
+0.13
-.000
+.005
-0.00
Maximum Panel Thickness 6.35 [.250]
Recommended
Panel Cutout
25.9
[1.000]
10.1
[.750]
2.0
[.080]
19.1
[.750]Sq.
1.6
[.062] Dia.
Ref.
2.2
[.086] Dia.
13.5
[.531]
Typ.
3.2
[.125]
Dia.
4 Plcs.
Panel Mount Jack
Receptacles
37.0
[1.455]
15.0
[.590]
10.1
[.750]
2.0
[.080]
19.1
[.750]
Sq.
7.0
[.275]Dia.
2.2
[.086] Dia.
13.5
[.531]
Typ.
3.2
[.125]
Dia.
4 Plcs.
Flange Mount Receptacles
Shell Part No.
Nickel
Plated 1057775-11
Brass
1Captured Center Contact
Shell Part No.
Nickel
Plated 1057780-11
Brass
1Captured Center Contact
Center Body
Contact Plating Dielectric Part No.
Plating
Gold Nickel Polypropylene 5221325-1
Center Body
Contact Plating Dielectric Part No.
Plating
Gold Nickel Acetal 221500-1
Jack-Jack Adapter
Bulkhead Jack-Jack Adapter
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
42
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 75 Ohm
Plugs, Crimp
These connectors have
been designed for optimum
performance and have a
true 75 ohm impedance the
complete length of the con-
nector. The crimp die tool-
ing listed below is different
from the equivalent 50 ohm
connectors.
Bulkhead Jack, Crimp
Interchangeable
Dies for
RG/U Termination Center Body Dim. PRO-CRIMPER
Contact Dielectric Style Hand Tool Part No.
Cable Type Plating Plating L 354940-1 or
PRO-CRIMPER
Adapter 679304-1
179, 179A, 179B,
187, O Crimp Gold Nickel Polymethyl- Commercial 27.79 318451-2 5221506-3
187A, BELDEN 9221 pentene 1.094
AT&T O Crimp Gold Nickel Polymethyl- Commercial 29.46 58174-1 5221506-5
735A pentene 1.160
302
BELDEN 88241
89269
Hi-Temp 62A Hex Crimp Gold Nickel Polymethyl- Commercial 31.75 58425-1 5413591-1
Times PL62, pentene 1.250
BERK-TEK
BTDC-59, BTDC-62
BELDEN 8281
O Crimp Gold Nickel Polymethyl- Commercial 32.9 58538-1 5221506-2
9141, 9231
pentene 1.295
H
34.29
[1.350] Max.
Hex Crimp and
O Crimp
12.96 Dia.
[.510] Max. L
Max.
5.54
[.218 ]
+0.08
-.000
+.003
-.000
12.83
[.505 ]
Dia.
+0.13
-.000
+.005
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended
Panel Cutout
RG/U Termination Center Contact Body Dielectric Style Dim. Tooling Part No.
Cable Type Plating Plating H
210, 62, 11/16 across flats, Use Hand Tool
62A, 62B, 20.32 354940-1
59, 59A, 59B, O Crimp Gold Nickel Polymethyl- Commercial .800 with Die Set 221509-1
BELDEN 9291, 9209, pentene max. across 58536-1
9169, 89269 points
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
43
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TNC Connectors, 75 Ohm (Continued)
Bulkhead Jack-Jack
Adapter
40.14 Max.
[1.580]
Center Body
Contact Plating Dielectric Part No.
Plating
Gold Nickel Polymethylpentene 414396-1
Right-Angle PC Board/
Panel Mount Jacks
C
L
AB34.93
[1.375]
15.88
[.625]
Mtg. Hgt.
Metal Body
Center Dimensions Part Numbers
Body Contact AB Without With
Material Plating Mounting Posts Mounting Posts
Metal 75 Gold 8.26 20.83 —5413506-1
.325 .820
1/2-28 Thread
5.54
[.218 ]
+.008
-.000
+0.03
-0.00
12.83
[.505 ]
Dia.
+0.13
-.000
+0.05
-0.00
Maximum Panel Thickness 6.1 [.240]
Recommended
Panel Cutout
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
44
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm)
Product Facts
■Bayonet lock coupling for
quick connect/disconnect
■Various connectors available
in 50 and 75 ohm versions
■Fully intermateable with
comparable BNC UG/U
connectors
■Full range of Hex Crimp
and O Crimp Products for
common coaxial cables.
■Low VSWR
■Single crimp connectors
offer one crimping operation
for fast application
■Twist-on connectors require
no special tooling for
application to the cable
■Field serviceable (Category
A) connectors qualified to
MIL-C-39012
■Field replaceable (Category
C) plugs with captivated
center contact
■Field replaceable plugs can
be terminated with industry
standard tooling
■Tarnish resistant Nickel
finish available
■Choice of different dielectrics
■Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
■PC Board soldered
connectors are recognized
under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
■Certified by Canadian
Standards
Association
File No. LR 7189
Between Series Adapters
For BNC Between Series Adapters, see
pages 251-260.
R
R
R
The Tyco Electronics BNC
RF connector family with
bayonet locking coupling
provides highly reliable,
quick connect/disconnect
coaxial connections.
Exclusive single and
O crimp terminations allow
positive insulation grip
and require no soldering,
providing terminations at
a very low overall applied
cost.
Available in both 50 and 75
ohm versions, these con-
nectors feature numerous
styles including cable plugs
and jacks, adapters and
printed circuit board con-
nectors. In addition to a
variety of crimp type termi-
nations, connectors are fur-
nished in field replaceable
and twist-on styles. These
connectors accept a wide
range of coaxial cables and
are intermateable with
industry standard connec-
tors designed to MIL-C-
39012 specifications.
Tyco Electronics can also
supply low cost alternatives
with an extensive commer-
cial type product line. A
lower cost consumer series
product offers the capability
to supply center contacts in
strip form and allow for auto-
mated center contact crimp
technology. All connectors
are designed around the
mil-specifications, but utilize
low-cost materials, offering
comparable mechanical
and electrical performance.
Product Specifications —
108-1275 — BNC Ohm Terminators
108-12020 — BNC O Crimp
Connectors
108-12044 — BNC Commercial Hex
Crimp
108-12047 — BNC Commercial and
Hex Crimp Connectors
108-12074 — BNC Solder Jacks
108-12075 — BNC Connectors
(Category A)
108-12078 — BNC Commercial PCB
Panel-Mount Jacks
108-12002 — BNC Commercial
T Adapter
108-12095 — BNC Commercial 75
Ohm Connectors
108-12096 — BNC Commercial Feed-
Thru and Bulkhead
Adapters
108-12079 — BNC Commercial 50
Ohm Solder Jacks
108-12103 — BNC Commercial PCB
Press Fit Jacks
Application Specifications —
114-12001 — BNC Commercial PCB
Jack Press Fit
Performance Specifications —
Page 45
Material Specifications — Page 46
Tooling — Pages 266-268
Military Category — All MIL type
O crimp connectors are Category B Type
(Tyco Electronics Crimp Tooling), unless
otherwise noted.
Packaging — All MIL Type connectors
are packaged individually, all O crimp
connectors are bulk packaged and all Hex
crimp connectors are individually pack-
aged unless otherwise noted.
Related Product Data
BNC Connectors (50 ohm/75 ohm) Performance Specifications
Single Category B Straight Right-Angle Commercial Commercial Commercial PC Commercial
Characteristics Crimp O Crimp Solder Solder O Crimp O Crimp Board Solder
(MIL Type) (MIL Type) Clamp Clamp & Hex Crimp & Hex Crimp 50 & 75 Ohms 50 Ohm Jacks
50 Ohms 75 Ohms
Electrical
Impedance, Nom. 50 50 50 50 50 75 50 & 75 50 & 75
(Ohms)
Working Voltage 500 500 500 500 500 500 500 500
(Volts RMS)
Contact Resistance Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 2.0 Inner: 2.0 Inner: 6/1.5 Inner: 2.75
(Milliohms) Outer: 0.3 Outer: 0.2 Outer: .20 Outer: .20 Outer: 1.0 Outer: 2.0 Outer: 3/0.2 Outer: 1.0
Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000 5000
(Megohms)
Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500 1500
Voltage (VAC)
Corona Level at 70,000 ft. 375 375 375 375 375 375 — 375
(Volts, RMS)
RF Leakage, Max. —-55 at -55 at -55 at -55 at -55 at ——
(dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz 1-2 GHz
RF Insertion Loss, —0.2 at 0.2 at 0.3 at 0.2 at 0.15 at ——
Max. (dB) 3 GHz 3 GHz 3 GHz 3 GHz 2 GHz
Frequency Range 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 and 0-4
(GHz) 0-2
VSWR in Frequency 1.35 1.30 1.30 1.35 1.30 1.30 — —
Range Max.
Mechanical
Force to Engage (lbs. [N])/couple, 13.3/11.12 13.3/11.12 13.3/.028 13.3/.028 26.7/26.69 26.7/26.69 ——
(in-lbs. [N-M]) max. [3/2.5] [3/2.5] [3/2.5] [3/2.5] [6/6.0] [6/6.0]
Coupling Nut Retention, 444.8 444.8 444.8 444.8 266.9 266.9 ——
Min. N [lbs.] [100] [100] [100] [100] [60] [60]
Cable Retention, 266.9 [60] 266.9 [60] 177.9 [40] 177.9 [40] 266.9 [60] 266.9 [60] 266.9 [60] —
N [lbs.] (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (PCB Ret)
Durability (Cycles) 500 500 500 500 500 500 500 500
Jam Nut Mounting Torque, 25 25 25 —25 25 253/12425
Max. [N•m] (in. lbs.) [2.8] [2.8] [2.8] [2.8] [2.8] [2.8/1.4] [2.8]
Environmental
Temperature Range, -65 to +85 -65 to +1651-65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165
Operating (C°) -55 to +852
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Vibration Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204
Cond. B Cond. B Cond. B Cond. B Cond. III Cond. B Method 201A Cond. B
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213
Cond. G, 50 G’s Cond. G, 50 G’s Cond. G Cond. G Cond. G, 100 G’s Cond. I, 100 G’s Cond. I or A, 50 G’s Cond. I, 100 G’s
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Thermal Shock Method 1003
Method 107 Method 107 Method 107 Method 107 Cond. A Method 107 Method 107 Method 107
Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Method 1002
Resistance Method 106 Method 106 Method 106 Method 106 Type II Method 106 Method 106 Method 106
MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202
Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101
Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B
Product 108-12002 108-12020 — — 108-12044 108-12095 108-12078 108-12079
Specification 108-12047
1Assembled to cable with polytetrafluorethylene dielectric.
2Assembled to cable with polyethylene dielectric.
3For Metal Threads
4For Polyester Threads
45
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
46
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued)
Single Category Straight Right-Angle Commercial Commercial Commercial Commercial
Connector Crimp B & C Solder Solder O Crimp PCB PCB Solder
Component (MIL Type) O Crimp Clamp Clamp Hex Crimp & Solder Press Fit Ohm Jacks Adapters
(MIL Type) Terminators
Connector Material
Collar Brass Brass Brass Brass Brass QQ-B-626 —— —
Brass
QQ-B-626 QQ-B-626 Zinc QQ-Z-363 QQ-B-626
Brass Brass
Outer Contact QQ-B-626 Phos. Bronze Brass Brass Brass —— —
QQ-B-626
(Plug) Beryl. Copper QQ-B-750 MIL-C-21768 Beryl. Copper
QQ-C-530 QQ-C-530
Zinc
Shell Brass Brass Brass — Zinc Zinc Zinc QQ-Z-363 Brass
(Jack) QQ-B-626 QQ-B-626 QQ-Z-363 QQ-Z-363 QQ-Z-363 Brass QQ-B-626
QQ-B-626
TEFLON Polyethylene TEFLON TEFLON
Dielectric MIL-P-19468 TEFLON TEFLON TEFLON Polypropylene Polymethylpentene TEFLON MIL-P-19468 MIL-P-19468
Polypropylene MIL-P-19468 Polymethylpentene Gen. Purpose1MIL-P-19468 Polyester PBT Polypropylene,
Gen. Purpose Gen. Purpose MIL-P-24519 Gen. Purpose
Brass
Center Contact Brass Brass Brass Brass Brass —— —
QQ-B-626
(Plug) QQ-B-626 QQ-B-626 QQ-B-626 Beryl. Copper
QQ-C-530
Beryl. Copper Beryl. Copper Phos. Bronze Phos. Bronze
Center Contact ASTM-B-643 ASTM-B-643 Beryl. Copper Beryl. Copper Beryl. Copper Phos. Bronze Beryl. Copper QQ-B-570 QQ-B-570
(Jack) QQ-C-530 QQ-C-530 QQ-C-530 QQ-B-750 QQ-C-530 Beryl. Copper Beryl. Copper
QQ-C-530 QQ-C-530
Gasket Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber —— —
Silicon Rubber
QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765
Ferrule Copper Copper ——
Copper —— ——
QQ-C-576 QQ-C-576 QQ-C-576
Connector Primary Finishes2
Silver Silver Silver
Collar QQ-S-365 QQ-S-365 Silver/ Silver/ Bright Nickel —— —
QQ-S-365
Bright Nickel Bright Nickel Bright Nickel Bright Nickel QQ-N-290 Bright Nickel
QQ-N-290 QQ-N-290 QQ-N-290
Silver Bright or Silver
Outer Contacts QQ-S-365 QQ-S-365 Silver/ Silver/ Matte Nickel Bright Nickel Bright Nickel Bright Nickel QQ-S-365
(Plug & Jack) Gold Bright Nickel Bright Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel
QQ-N-290 QQ-N-290
Tin Lead Tin Lead Tin Lead Silver
Center Contacts MIL-G-45204 Gold Gold Gold ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365
(Plug & Jack) Silver MIL-G-45204 Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold
Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204
Silver
Ferrule3QQ-S-365 QQ-S-365 ——
Tin Lead —— ——
Tin Lead ASTM-B-545
ASTM-B-545
1Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519.
2If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification.
3Ferrules with tin-lead finish are used with nickel plated outer contacts.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
BNC Connectors, 50 Ohm
L
Max.
14.53
[.572]
Dia. Max.
Plugs, Crimp
L
Max.
Single Crimp
14.53
[.572]
Dia. Max.
Hex and O Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.
Cable Type Plating Dielectric Style Lwith or Tool 69710-1
Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
178, 178A, 33.33
178B, Single Crimp Silver TEFLON MIL Type 69245-4 — 69471-5330876-0
196, 196A 1.312
Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-3 — 2-5221128-1
1.320
O Crimp Nickel Polyethylene Commercial 27.69 220009-5 318450-2 220217-3 1-5227079-6
174, 1.090
188, 188A,
O Crimp Nickel TEFLON MIL Type 30.18 —1424050-1 220026-1 5225395-7
316 1.188
Single Crimp Silver TEFLON MIL Type 33.33 69245-2 — 69422-2-5330061-1
1.312
Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-3 — 2-5221128-3
179, 179A, 1.320
179B, 161, O Crimp Nickel Polyethylene Commercial 27.69 —1424050-1 220217-3 2-5227079-2
187, 187A, 1.090
BELDEN O Crimp Nickel TEFLON MIL Type -30.18 ——220026-1 5225395-8
9221 1.188
Single Crimp Silver TEFLON MIL Type 33.33 —91910-1 69408-2-5329446-1
1.312
RD 316, 188, O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 — 8-5227079-2
Double Braid 1.090
Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—2-5221128-7
BELDEN 1.320
8219 O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 6-5227079-73
1.090
BELDEN 9907,
89907 COMM/ O Crimp Nickel Polyethylene Commercial 27.69 220187-1 318452-2 220217-1 6-5227079-84
SCOPE 2104 1.090
O Crimp Nickel Polyethylene Commercial 27.69 69477-4 58539-1 58376-1 1-5227079-9
BELDEN 1.090
8218 O Crimp Nickel TEFLON MIL Type 30.18 —91904-1 69669-2 1-5225395-0
1.188
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
3For use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only.
4For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only.
47
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
COMM/SCOPE is a trademark of
Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
48
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Plugs, Crimp (Continued)
L
Max.
14.53
[.572]
Dia. Max.
L
Max.
Single Crimp
14.53
[.572]
Dia. Max.
Hex and O Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.
Cable Type Plating Dielectric Style Lwith or Tool 69710-1
Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—5221128-13
1.320
O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 5227079-5
58, 58A, 1.090
58B, 58C O Crimp Nickel TEFLON MIL Type 33.74 269478-1 220189-3 69727-5225395-1
1.328
Single Crimp Silver TEFLON MIL Type 33.33 2—91904-4 69223-1 2-5329444-1
1.312
BELDEN Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—1-5221128-0
88240, 1.320
BERK-TEK O Crimp Nickel Polyethylene Commercial 33.33 220187-1 58435-11220217-1 4-5227079-3
BTDC-58, 1.312
COMM/ O Crimp Nickel TEFLON MIL Type 33.33 269478-1 220189-3 69727-4-5225395-2
SCOPE 2135 1.312
O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 5227079-6
223, 1.280
55, 55A, O Crimp Nickel TEFLON MIL Type 43.64 269478-1 220189-3 69727-5225395-3
55B 1.718
Single Crimp Silver TEFLON MIL Type 33.33 —91904-3 69424-2-5329444-2
1.312
O Crimp Nickel Polyethylene Commercial 27.69 220187-1 58435-11220217-1 6-5227079-1
1.090
142, 142A, O Crimp Nickel TEFLON MIL Type 30.18 269478-1 220189-3 69727-5225395-6
142B, 400 1.188
Single Crimp Silver TEFLON MIL Type 33.33 269331-1 — 69429-1 2-5330358-2
1.312
Consult Tyco Electronics for recommended crimp tooling.
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
3Bulk packaged.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
BNC Connectors, 50 Ohm (Continued)
Plugs, Crimp (Continued)
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand Part No.
Cable Type Plating Dielectric Style Lwith or Tool 69710-1
Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—1-5221128-1
1.320
O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-11220217-2 5227079-7
124, 140, 210, 1.090
62, 62A, 62B, O Crimp Nickel Polyethylene Commercial 27.69 220187-2 58435-11220217-2 1-5227079-159, 59A, 59B, 1.090
BELDEN 9291,
O Crimp Nickel TEFLON MIL Type 30.18 —58537-1 — 5225395-2
9209, 9269 1.188
Single Crimp Silver TEFLON MIL Type 33.33 69141-1 — — 2-5329445-1
1.312
302, BELDEN
88241, 89269, Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—1-5221128-1
Hi-Temp 62A, 1.320
Times PL62,
BERK-TEK, BTDC-59, O Crimp Nickel TEFLON MIL Type 34.14 69477-1 58537-1 69669-1 4-5225395-1
BTDC-62 1.344
Hi-Temp 59,
Times PL59, O Crimp Nickel Polyethylene Commercial 33.33 —58537-1 — 5-5227079-3
PLF59 (20 AWG C.C.) 1.312
BELDEN
9104, 9240, Hex Crimp Nickel Polyethylene Commercial 33.53 —58436-12—1-5221128-7
9112, 9167, 1.320
9259, 9266,
Times O Crimp Nickel TEFLON MIL Type 30.94 —258537-1 69669-1 2-5225395-0
FM-59 1.218
BELDEN 8281,
9141, 9231, Single Crimp Silver Polypropylene MIL Type 41.50 69652-—220000-1 5330878
Western Electric 1.634
724, 728, 3049
8, 8A, O Crimp Silver TEFLON MIL Type 27.31 220015-1 — — 5225886-1
213 1.075
11, 11A O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 5225886-4
1.875
BELDEN 9914, O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 5225886-7
Times FM-8 1.875
Alpha 9847, O Crimp Silver TEFLON MIL Type 47.63 220015-1 — — 225886-5
BELDEN 8213, 9292 1.875
9, 9A, 9B, O Crimp Silver TEFLON MIL Type 52.38 220015-1 — — 5225886-1
214 2.062
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
2Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1.
2Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1
L
Max.
14.53
[.572]
Dia. Max.
L
Max.
Single Crimp
14.53
[.572]
Dia. Max.
Hex and O Crimp
49
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
50
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Right-Angle Plugs,
Crimp
L
Max.
14.53
[.572]
Dia. Max.
26.57
[1.046] L
Max.
14.53
[.572]
Dia. Max.
26.57
[1.046]
Single Crimp Hex and O Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
174, 188, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-3 — 5413959-3
188A, 316
pentene 1.553
Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91910-1 69422-5331178-0
1.750
179, 179A, 39.45
179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial 1.553 — 58436-3 — 5413959-4
187, 187A, pentene
BELDEN 9221
180, 180A, 180B, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-3 — 5413959-5
195, 195A pentene 1.553
BELDEN 9907,
89907, 8219, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-1 — 5413959-6
COMM/SCOPE pentene 1.553
2104, 3104
Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 — 58436-1 — 5413959-1
pentene 1.553
58, 58A, O Crimp Gold Nickel TEFLON MIL Type 37.29 69478-1 220189-3 69727-1 5225974-1
58B, 58C 1.468
Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91904-1 69223-1 5331175-0
1.750
O Crimp Gold Nickel TEFLON MIL Type 37.29 69478-1 220189-3 69727-1 5225974-2
55, 55A, 1.468
55B, 223 Single Crimp Gold Silver TEFLON MIL Type 44.45 — 91904-3 69429-1 5331182-0
1.750
142, 142A, Single Crimp Gold Silver TEFLON MIL Type 44.45 69331-1 — 69429-1 5331182-0
142B, 400 1.750
124, 140, 210,
62, 62A, 62B, 37.29
59, 59A, 59B, O Crimp Gold Nickel TEFLON MIL Type 1.468 — 58537-1 69669-1 5225974-5
BELDEN 9291,
9209, 9269
38.10
[1.500]
14.53
[.572]
Dia. Max.
Plugs, Twist-On
Related Product Data
Twist-On plugs must be used with cable
that has a solid conductor. These plugs
are not recommended for applications
where the cable frequently moves or
flexes.
Mating Twist-On Jack —Page 52 RG/U Contact Body Dielectric Style Part No.
Cable Plating Plating
59, 59A, Gold Nickel Polymethyl- Commercial 5414265-3
59B pentene
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire and Cable Company.
COMM/SCOPE is a trademark of Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de Nemours and Company.
BNC Connectors, 50 Ohm (Continued)
L
Max.
11.1
[.437]
Dia. Max.
11.08
[.436]
Dia. Max.
L
Max.
Single Crimp Hex and O Crimp
Jacks, Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
Hex Crimp Gold Nickel Polymethyl- Commercial 33.02 —58436-3 — 5413779-3
pentene 1.300
O Crimp Gold Nickel Polypro- Commercial 30.48 —1424050-1 220217-3 5228979-7
174, 188, pylene 1.200
188A, 316 O Crimp Gold Nickel TEFLON MIL Type -30.48 —1424050-1 220026-1 5225396-7
1.200
Single Crimp Gold Silver TEFLON MIL Type 33.33 ——69422-2-5330062-1
1.312
179, 179A,
179B, 161, Hex Crimp Gold Nickel Polymethyl- Commercial -33.02 —58436-3 — 2-5413779-4
187, 187A, pentene 1.300
BELDEN 9221
O Crimp Gold Nickel Polypro- Commercial 30.48 220187-1 58435-11220217-1 5228979-5
58, 58A, pylene 1.200
58B, 58C O Crimp Gold Nickel TEFLON MIL Type 30.48 2—91901-1 69727-5225396-11
1.200
223, 55, Single Crimp Gold Silver TEFLON MIL Type 33.33 69140-2 91904-3 69424-2-5329452-2
55A, 55B 1.312
124, 140, 210, O Crimp Gold Nickel Polypro- Commercial 30.48 220187-2 58435-11220217-2 5228979-6
62, 62A, 62B, pylene 1.200
59, 59A, 59B,
BELDEN 9291, O Crimp Gold Nickel TEFLON MIL Type 30.48 —58537-1 269669-1 5225396-2
9209, 9269 1.200
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
51
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
52
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jacks, Twist-On
Related Product Data
Twist-on jacks must be used with
cable that has a solid conductor.
These jacks are not recommended
for applications where the cable
frequently moves or flexes.
Mating Twist-On Plug —Page 50
RG/U Center Body Dielectric Style Part No.
Cable Contact Plating
59, 59A, 59B Gold Nickel Acetal Commercial 222428-1
40.14
[1.580] Max.
Panel Jacks, Crimp
28.96
[1.140]
Max. 2.77
[.109]
12.7 ±0.1
[.500 ±.004]
12.7 ±0.1
[.500 ±.004]
Recommended Panel Cutout
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style with or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
174, 188, 188A, 316 O Crimp Gold Nickel TEFLON MIL Type — 1424050-1 220026-1 5225397-7
58, 58A, 58B, 58C O Crimp Gold Nickel TEFLON MIL Type -69478-1 91901-1 69727-5225397-1
124, 140, 210, 62, 62A, 62B,
59, 59A, 59B, BELDEN 9291, O Crimp Gold Nickel TEFLON MIL Type -69477-1 258537-1 269669-1 5225397-2
9209, 9269, 89269
Dia.
11.2
[.441] Dia.
17.84
[.702] Max.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
53
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Bulkhead Jacks,
Crimp
Note: Panel Insulating
Bushings — Page 54
HL
Max.
HL
Max.
11.04
[.435]
Min.
12.82
[.505]
Dia. Min.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Recommended
Panel Cutouts
Maximum Panel
Thickness 3.18 [.125]
Single Crimp Hex and O Crimp
H = 11/16" across flats, 20.32 [.800] Max. across points
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 —58436-3 — 5413771-3
pentene 1.450
O Crimp Gold Nickel Polypro- Commercial 34.93 ——220217-3 5228980-7
174, 188, pylene 1.375
188A, 316 O Crimp Gold Nickel TEFLON MIL Type 35.71 ——220026-1 5225398-7
1.406
Single Crimp Gold Silver TEFLON MIL Type 32.13 ——69422-2-5330063-1
1.265
179, 179A, O Crimp Gold Nickel TEFLON MIL Type 35.71 —1424050-1 220026-1 5225398-8
179B, 161, 1.406
187, 187A, Single Crimp Gold Silver TEFLON MIL Type 32.13 —91910-1 69408-2-5329458-1
BELDEN 9221 1.265
Times RD316 O Crimp Gold Nickel TEFLON MIL Type 35.71 —91904-1 69669-2 1-5225398-5
1.406
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
54
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Panel Insulating
Bushings for
Bulkhead Jacks
Material—Nylon
Note: Can not be used with single
crimp bulkhead jacks.
Part No. 330620 (2 Required)
14.73±0.13
[.580±.005]
Dia.
14.1±0.08
[.555±.003]
13.95
[.549]
Dia.
14.58
[.574]
5.46
[.215]
0.89
[.035]
0.81
[.032]
12.93
[.509]
Dia.
17.45
[.687]
Dia. Recommended Panel Cutout
Dia.
BNC Connectors, 50 Ohm (Continued)
HL
Max.
Bulkhead Jacks,
Crimp (Continued)
Note: Panel Insulating Bushings —
at the bottom of this page
Single Crimp Hex and O Crimp
Interchangeable Dies
CERTI-CRIMP for PRO-CRIMPER Interchangeable
RG/U Termination Center Body Dim. Hand Tool Hand Tool 354940-1 Dies for Hand
Cable Type Contact Plating Dielectric Style Lwith or Tool 69710-1 Part No.
Plating Integral Die PRO-CRIMPER & 626 Pneu.
Adapter 679304-1 Head 318161-1
58, 58A,
58B, 58C,
BELDEN 88240, Hex Crimp Gold Nickel Polymethyl- Commercial 36.83 —58436-1 — 5413771-1
BERK-TEK pentene 1.450
BTDC-58,
COMM/SCOPE 2135
O Crimp Gold Nickel Polypro- Commercial 34.93 220187-1 58435-11220217-1 5228980-5
pylene 1.375
58, 58A, O Crimp Gold Nickel TEFLON MIL Type 41.28 —91901-1 69727-5225398-1
58B, 58C 1.625
Single Crimp Gold Silver TEFLON MIL Type 32.13 —91904-4 69223-1 2-5329456-1
1.265
223, O Crimp Gold Nickel TEFLON MIL Type 35.71 —91901-1 69727-5225398-3
55, 55A, 55B 1.406
142, 142A, O Crimp Gold Nickel TEFLON MIL Type 35.71 —91901-1 69727-5225398-6
142B, 400 1.406
124, 140, 210,
62, 62A, 62B,
59, 59A, 59B, O Crimp Gold Nickel Polypro- Commercial 34.93 220187-2 58435-11220217-2 5228980-6
BELDEN 9291, pylene 1.375
9209, 9269
1Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1.
H
L
Max.
11.04
[.435]
Min.
12.82
[.505]
Dia. Min.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Recommended
Panel Cutouts
Maximum Panel
Thickness 3.18 [.125]
H = 11/16" across flats, 20.32 [.800] Max. across points
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
BERK-TEK is a trademark of Nexans, Inc.
COMM/SCOPE is a trademark of
Commscope, Inc.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
BNC Connectors, 50 Ohm (Continued)
W
Dia. Max.
L
Max.
3/8" - 32
Thread
Accepts 1.5 [.059]
Dia. Max. Wire
Bulkhead Solder Jacks,
Front Mount
Body Plating —Nickel
Without Solder Terminal
W
Dia. Max.
L
Max.
3/8" - 32
Thread
Accepts 1.5 [.059]
Dia. Max. Wire
22.23
[.875]
With Solder Terminal
Recommended Panel Cutout
.396/4.04
[.156/.159]
9.65/9.75
[.380/.384]
Dia.
Dimensions Panel Insulating Part No.
Contact Dielectric LW
Thickness Bushing Without Solder With Solder
Material Terminal* Terminal**
Silver VALOX 26.93 13.09 1.17-3.18 227223-1 or 5227754-3 5227755-3
1.060 .515 .046-.125 221951-1
33.33 13.09 1.17-6.35 227223-1 or —5227169-7
VALOX 1.312 .515 .046-.250 221951-1
26.93 13.09 1.17-3.18 227223-1 or 5227754-2 5227755-2
Gold 1.060 .515 .046-.125 221951-1
33.33 13.09 1.17-6.35 227223-1 or 5227169-4 5227169-8
TEFLON 1.312 .515 .046-.250 221951-1
26.93 13.09 1.17-3.18 227223-1 or 5227715-3 5227716-3
1.060 .515 .046-.125 221951-1
33.33 13.09 1.17-6.35 227223-1 or —5227169-5
Tin VALOX 1.312 .515 .046-.250 221951-1
26.93 13.09 1.17-3.18 227223-1 or 5227754-1 5227755-1
1.060 .515 .046-.125 221951-1
**Includes lockwasher and jam nut.
**Includes solder terminal and jam nut.
Plugs, for JIS Cables, Crimp
Plating
Body — Nickel
Center Contact — Gold
14.53
[.572]
Dia. Max.
L
Max.
Interchangeable Dies
for PRO-CRIMPER
Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor
PRO-CRIMPER
Adapter 679304-1
3D-2V Hex Crimp Polyethylene 33.53 58436-1 3-5221128-1
1.320
55
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
VALOX is a trademark of General Electric
Company.
Insulating Bushings
Recommended
Panel Cutout
Recommended
Panel Cutout
1.78
[.070]
0.81
[.032]
12.7
[.500]
Dia.
3.94
[.155]
11.94
[.470]
11.43
[.450]
9.53
[.375]
Part No. 221951-1
Part No. 227223-1
12.83 ±0.08
[.505 ±.003]
Dia.
12.07±0.08
[.475 ±.003]
11.56 ±0.08
[.455 ±.003]
Dia.
10.97 ±0.06
[.432 ±.003]
0.94
[.030]
Max.
Dia.
15.88
[.625] Dia. 9.53
[.375] Dia.
10.93
[.430] Dia.
4.04
[.159] Max.
1.09
[.043] Max.
14.86
[.585] Dia.
56
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
12.83
[.505]
Max.
3/8" - 24 Thread
26.80
[1.055]
Max.
Isolated Bulkhead Solder Jacks,
Front Mount
Plating
Body—Nickel
Dielectric
—White
VALOX
Panel Thickness 1.17-6.35 [.046-.250]
Recommended
Panel Cutout
31.75
[1.250]
13.09 Dia.
[.515] Max.
3/8" - 24
Thread
Accepts
1.5 [.059]
DIa. Max.
Wire
Panel Thickness 1.17-3.18 [.046-.125]
Recommended
Panel Cutout
Part No. 5414194-1
Plating
Body—Nickel
Center Contact —Silver
Dielectric
—Black
VALOX
Flange & Thread Material
—
Black
VALOX
Center Flange & Part
Contact Thread No.
Plating Material
TinVALOX 5227726-1
Silver VALOX 5227726-2
Gold VALOX 5227726-3
Max.
9.91
[.390 ]
+0.13
-0.20
+.005
-.000
Dia.
3.89
[.153 ]
+0.08
-0.00
+.003
-.000
9.60
[.378 ]
+0.08
-0.00
+.003
-.000
Dia.
3.94
[.155 ]
+0.08
-0.00
+.003
-.000
Sealed Bulkhead Solder Jack,
Rear Mount
Part No. 5227426-1
17.78 Dia.
[.700] Max.
31.75
[1.250] Maximum Panel Thickness 6.35 [.250]
Recommended
Panel Cutout
1/2" - 28
Thread
Rubber
Gasket
Accepts .
1.5 [.059]
DIa. Max.
Wire
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Max.
Plating
Body—Nickel
Center Contact —Gold
Dielectric
—
Polymethylpentene
This connector is designed to prevent
moisture from entering the interface
from the rear of the connector.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
57
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
C
L
C
L
Recommended PC Board Layouts
Without Mounting Posts With Mounting Posts
(Top View)
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
GS 0.89 ±0.08
[.035 ±.003]
2.64 [.104] Dia.
Clearance Hole for
2-56 Self-Tapping Screw*
(2 Holes)
5.08 ±0.05
[.200 ±.002]
2.01 ±0.05
[.079 ±.002]
(2 Holes)
Mating
Face
Right-Angle Jacks
PC Board/Panel Mount
Body—Nickel
Dielectric
—Polymethylpentene
AB34.93
[1.375]
C
Mtg. Hgt.
1/2-28 Thread 1/2-28 Thread
VALOX Body
AB34.93
[1.375]
Metal Body
C
Mtg. Hgt.
(Top View)
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
GS 0.89 ±0.08
[.035 ±.003]
5.08 ±0.05
[.200 ±.002]Mating
Face
Body Center Dimensions Part No.
Contact Without With LWith L
Material Plating ABC
Mounting Posts Mounting Posts Compliant Posts
Tin 8.59 21.21 15.88 5226990-1 5227161-1 3.48 ——
.338 .835 .625 .137
VALOX, Gold1 8.59 21.21 15.88 5226990-3 5227161-3 3.48 ——
White .338 .835 .625 .137
Gold1 6.91 21.21 13.18 —5227161-7 3.48 ——
.272 .835 .519 .137
Tin 8.59 21.21 15.88 —5227161-2 3.48 ——
.338 .835 .625 .137
Gold1 8.59 21.21 15.88 5226990-6 5227161-6 3.48 ——
VALOX, .338 .835 .625 .137
Black Gold1 6.91 21.21 13.18 —5227161-9 3.48 ——
.272 .835 .519 .137
Gold1 6.17 21.21 11.68 —5415046-1 —— —
.243 .835 .460
Tin 8.26 20.83 15.88 —5227661-1 3.48 ——
.325 .820 .625 .137
Gold1 8.26 20.83 15.88 5227676-1 5227677-1 3.48 ——
Metal .325 .820 .625 .137
Gold1 6.91 20.83 12.70 1274668-1 5413879-1 3.48 ——
.272 .820 .500 .137
Gold2 6.91 20.83 12.70 —5413879-2 3.48 ——
.272 .820 .500 .137
High Temp. Gold1 6.91 21.21 13.18 ———5415218-5 2.79
Housing .272 .835 .519 .110
Plating:
Gold1 — 0.00076 [.000030] thick
Gold2 — 0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54.
Mounting Post Style
Compliant Post
L
E
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
L
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
58
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Vertical Jacks
PC Board/Panel Mount
Plating
Body—Nickel
Dielectric
—Polymethylpentene
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
2.64 [.104] Dia.
Clearance Hole
for 2-56
Self-Tapping
Screw* (2 Holes)
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08
[.035 ±.003]
GS
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08
[.035 ±.003]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
GS
(Top View) (Top View)
L
B
1/2-28 Thread
34.93
[1.375]
Mtg. Hgt.
15.88
[.625]
L
B
1/2-28 Thread
34.93
[1.375]
Mtg. Hgt.
15.88
[.625]
* Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2.
Screw for thickness of less than 2.38 [.093] Part No. 221108-4.
Without Mounting Posts With Mounting Posts
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
VALOX Body Metal Body
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
Part No.
Body Center Dim. Dim. Without With
Material Contact BL
Mounting Mounting
Plating Posts Posts
Tin 21.21 3.48 5226993-1 5227222-1
VALOX, .835 .137
White Gold 21.21 3.48 5226993-3 5227222-3
.835 .137
Tin 21.21 3.48 5226993-2 5227222-2
VALOX, .835 .137
Black Gold 21.21 3.48 5226993-6 5227222-6
.835 .137
Tin 20.83 3.48 —5227671-1
Metal .820 .137
Gold 20.83 3.48 —5227673-1
.820 .137
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Recommended PC Board Layouts
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
59
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
C
L
8.59
[.338]
34.93
[1.375]
21.21
[.835]
15.88 [.625]
Mounting Height
1/2-28 Thread
Jacks with
Mounting Flanges
PC Board/Panel Mount
(Top View)
2.54
[.100]
SG
11.43
[.450]
22.86 ±0.08
[.900 ±.003]
0.89 ±0.08
[.035 ±.003]
8.89
[.350]
3.3 [.130] Dia.
Clearance Hole
for 5-40 Screw
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
Mating
Face
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout Body Center Contact Part No.
Material Plating
VALOX, Tin 5226978-1
White Gold 5226978-3
Recommended PC Board Layout
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
60
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Vertical Metalized Jacks
PC Board Mount
17.45
[.687]
15.88
[.625] Drill Holes for
0.94 ±0.05 [.037 ±.002]
Dia. Pin (5 Places)
6.35 ±0.05
[.250 ±.002]
12.7 ±0.08
[.500 ±.003]
6.35 ±0.05
[.250 ±.002]
12.7 ±0.08
[.500 ±.003]
3.73
[.147]
4.32
[.170]
1.07 ±0.05
[.042 ±.002]Dia.
1.73 ±0.05
[.068 ±.002]Dia.
6.48
[.255]
7.47
[.294]
Style D
Style A
Style C
6.88 ±0.05
[.271 ±.003]
3.43 ±0.05
[.135 ±.002]
6.88 ±0.05
[.271 ±.003]
1.32 ±0.08
[.052 ±.003]Dia.
2.44 ±0.08
[.096 ±.003]
(4 Holes)
Dia.
15.88
[.625]
16.64
[.655]
Body Center Leg
Plating Contact Plating Dielectric Style Length L Part No.
Silver VALOX A6.35 5227699-1
.250
Gold VALOX A6.35 5227699-2
.250
TinVALOX A6.35 5227699-3
Nickel .250
Gold VALOX A3.81 5414460-11
.150
Silver VALOX C4.45 5222420-1
.175
Gold VALOX E6.35 5415189-1
.250
Gold TEFLON B3.30 5413969-2
.130
Tin-Lead Silver VALOX C3.18 5414305-1
.125
Gold VALOX D3.43 5221123-2
.135
1With .76 [.030] standoffs on top of legs.
Style B
L
L
Drill Hole
to Receive
0.940.06
[.037±.002]
Dia. Pin,
5 Required
12.70 0.08
[.500 ±.003]
12.70 0.08
[.500 ±.003]
6.35 ±0.06
[.250 ±.002]
Style E (Panel Mount)
L
20.57
[.810]
L
6.88 ±0.08
[.271 ±.003]
3.43 ±0.08
[.135 ±.003]
1.02 ±0.08
[.040 ±.003]Dia.
1.50 ±0.08
[.059 ±.003]
(4 Holes)
Dia. 3.44 ±0.08
[.135 ±.003]
6.88 ±0.08
[.271 ±.003]
Recommended PC Board Layouts
L
20.78 0.38
[.818 .015]
Sq.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
VALOX is a trademark of General Electric
Company.
61
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Press Fit Vertical Metalized Jack,
PC Board Mount Insulating Bushing
Material—Polypropylene
Part No. 222163-1
Only to be used on Part Nos. 5222006-1
& 5222462-1
Part No. 5222006-1
14.61
[.575]
1.02 ±0.08
[.040 ±.003]Dia.
6.88 ±0.05
[.271 ±.002]
3.43 ±0.05
[.135 ±.002]
6.88 ±0.05
[.271 ±.002]
20.57
[.810]
Max.
11.94 Dia.
[.470] Max.
Recommended PC Board Layout
PC Board Thickness Not Less Than 0.99 [.093]
Dia. 11.94
[.470] Dia.
2.96
[.115] Max.
6.61
[.260] Max.
1.5
[.059 ]
Dia.
4 Holes
+0.08
-0.10
+.003
-.004
Vertical Metalized Jacks,
PC Board Mount
24.00
[.945]
10.72 ± 0.25
[.422 ± .010]
10.70 ± 0.08
[.421 ± .003]
7.50 ± 0.08
[.295 ± .003]
1.00 ± 0.08
[.039 ± .003]
2 Plcs.
1.50 ± 0.08
[.059 ± .003]
2 Plcs.
3.00 ± 0.10
[.118 ± .004]
1.70 ± 0.10
[.067 ± .004]
2.50 ± 0.08
[.098 ± .003]
4 Plcs.
Signal Contact Hole
Switching
Contact
Hole
Part No. 1274314-1
(Switching)
24.00
[.945]
10.72 ± 0.25
[.422 ± .010]
Part No. 1274315-1
Recommended
PC Board Layout
10.70 ± 0.08
[.421 ± .003]
3.75 ± 0.08
[.148 ± .003]
1.00 ± 0.08
[.039 ± .003]
1.50 ± 0.08
[.059 ± .003]
2 Plcs.
3.00 ± 0.10
[.118 ± .004]
1.70 ± 0.10
[.067 ± .004]
2.50 ± 0.08
[.098 ± .003]
3 Plcs.
Recommended
PC Board Layout
Body Contact Dielectric Part
Plating Plating No.
Tin Silver Polyphenylene 6274314-1
Tin Silver Polyphenylene 6274315-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
62
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Recommended PC Board Layout
6.6 ±0.08
[.260 ±.003]
6.6 ±0.08
[.260 ±.003]
3.3 ±0.08
[.130 ±.003]
1.17 ±0.08
[.046 ±.003]
2.11 ±0.08
[.083 ±.003]
Dia.
(4 holes)
Maximum PC Board Thickness 2.54 [.100]
Dia.
C
L
6.15
[.242]
10.97 [.432]
Mounting Height
27.64 ±0.51
[1.088 ±.020]
Right-Angle Metalized Jacks,
PC Board Mount
Body Dielectric Center Part
Plating Contact Length No.
Nickel Polymethyl- 4.34 5413631-1*
pentene .171
Tin TEFLON 4.34 5413631-2*
.171
Nickel Polymethyl- 3.33 5413631-3*
pentene .131
Body Dielectric Contact Part
No.
Nickel TPX Gold 5414373-1
Recommended PC Board Layouts
1.19 ±0.18
[.047 ±.007]Dia.
7.62 ±0.08
[.300 ±.003]
1.78 ±0.08
[.070 ±.003]
Dia.
2 Holes
7.62 ±0.08
[.300 ±.003]
3.81 ±0.08
[.150 ±.003]
8.64
[.340]
21.85
[.860] 25.40
[1.000]
Right-Angle Metalized Jacks,
PC Board/Panel Mount
Body Part
Plating Dielectric No.
Tin TEFLON 5415025-2
Tin TPX 5415025-1
Lockwasher and Jam Nut see page 59.
6.6 ±0.08
[.260 ±.003]
6.6 ±0.08
[.260 ±.003]
3.3 ±0.08
[.130 ±.003]
1.17 ±0.08
[.046 ±.003]
2.11 ±0.08
[.083 ±.003]
4 holes
Dia.
Dia.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.64
[.222 ]
+0.08
-0.00
+.003
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
1/2-28 Thread
27.64 ± 0.51
[1.088 ±.020]
10.97 ± 0.18
[.432 ±.007]
6.15 ± 0.25
[.242 ±.010]
11.66
[.459]
4.34
[.171]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TPX is a trademark of Mitsui Chemicals
America, Inc.
63
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Tee Adapter
Covers
Material—Polypropylene, general
purpose
F
5.08
[.200]
15.11
[.595]
114.55 ±0.76
[4.510 ±.030]
Color
Black
Ivory
Part
No.
221586-1
221586-3
D
E
Tee Adapters Style A
(Jack-Plug-Jack) Style B
With Insulated
Cover
(Jack-Plug-Jack)
Insulation Material
Polyphenylene oxide
Style C
(Jack-Jack-Jack)
E
D
F
E
D
Body Center Contact Dimensions Comparable Packaging
Style Material Material Dielectric UG/U No. Part No.
and Plating and Plating DE F
Connector Per Pkg.
Brass, BE CU, Gold 32.54 26.19 14.27 Bulk
Nickel (30)2TEFLON 1.281 1.031 .562 274A (100) 221543-2
PH BR, Gold 33.02 27.31 14.50 Bulk
(15)2Acetal 1.300 1.075 .571 —(100) 5413592-2
ABE CU, Gold 33.02 27.31 14.50 Bulk
Zinc, (30)2Acetal 1.300 1.075 .571 —(100) 5413592-6
Nickel PH BR, Gold 33.02 27.31 14.50 Individual
(15)2Acetal 1.300 1.075 .571 —(1) 35413592-9
BE CU, Silver 33.02 27.31 14.50 Individual
(200)2Acetal 1.300 1.075 .571 —(1) 1-5413592-1
BZinc, BE CU, Gold Acetal 32.54 31.12 17.15 1Bulk
Nickel (30)21.281 1.225 .675 —(100) 5413366-21
Brass, BE CU, Silver 32.54 23.37 Bulk
CNickel (200)2TEFLON 1.281 .920 —— (100) 221988-1
Zinc, PH BR, Gold 32.54 23.62 Bulk
Nickel (50)2Acetal 1.281 .930 —— (100) 5414311-1
1Gray insulation cover
2(Microinches min thickness)
3(Special graphics)
Dia.
Dia.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
64
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
35.81
[1.410]
32.54
[1.281]
Right-Angle Adapters
(Jack-Plug)
26.97
[1.062]
Bulkhead Jack-Jack
Adapters
L
Max.
H
Max.
Recommended Panel Cutout
H= 11/16 across flats, 20.32 [.800] across points.
36.07
[1.420]
15.87
[.625]
22.89
[.901]
Max.
14.53 Dia
[.572] Max.
Isolated Bulkhead Jack-Jack
Adapter
Body Center
Contact Dielectric Part No.
Plating Plating
Nickel Gold Polymethylpentene 5414105-1
Body Center Dimensions
Contact Dielectric Part No.
Plating Plating HL
Nickel Silver 17.45 38.10 TEFLON 330024-
.687 1.500
Nickel Gold1 17.78 36.07 Poly- 5228226-1
.700 1.420 ethylene
Nickel Gold2 17.78 36.07 Poly- 5228226-3
.700 1.420 ethylene
Plating:
Gold1 — 0.00127 [.000050] thick Gold2 — 0.00076 [.000015] thick
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Body Center
Contact Dielectric Part No.
Plating Plating
Nickel Silver TEFLON 5329517-1
Nickel Gold TEFLON 5222165-2
Nickel Gold Polymethylpentene 5414666-1
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.06
-0.00
+.003
-.000
Recommended Panel Cutout
H= 11/16 across flats, 20.32 [.800] across points.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Dia.
5.54
[.218 ]
+0.06
-0.00
+.003
-.000
Jack-Jack Adapters
Style A
Body Center
Contact Dielectric Style Part No.
Plating Plating
Nickel Silver TEFLON A221551-1
Nickel Gold TEFLON A221551-3
Nickel Gold Polymethyl- B5414414-1
pentene
Style B
Plug-Plug Adapter
31.8
[1.252] Ref.
Contact Body Part No.
Plating Plating
Gold Nickel 415796-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
65
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 50 Ohm (Continued)
Jack Covers
101.6
[4.000]
#6 Stud Size
22.10
[.870] 14.53 Dia.
[.572] Max.
Body Plating Part No.
Silver 330022
Nickel 1-330022-2
Max.
14.53 Dia.
[.572] Max. 33.02
[1.300]
#6 Stud Size
Tether
Terminator Plugs
50, 75, 93 Ohm
Plating
Body—Nickel
Center Contact —Gold
Dielectric —Polyethylene
Insulated
Terminators
Insulation Material
Polyphenylene oxide
Long Cover
Short Cover*
38.10
[1.500]
17.40
[.685]
17.40
[.685]
Register Color Cover Part
Specification Style No.
Gray Long 5413557-1
1 Watt, 50 Ohm Short 5413364-2
Black Long 5413557-2
* The Short Cover is required when mating the Terminator with a Tee Adapter.
Resistor Part No.
Specification With Tether Without Tether
1 Watt, 50 Ohm 5221629-115221629-4
1 Watt, 75 Ohm 5221629-215221629-5
1 Watt, 93 Ohm — 5221629-6
0.5 Watt, 75 Ohm — —
1 Watt, 50 Ohm 1-5221629-61—
1Tether is conductive with #4 stud size
Max. 38.10
[1.500] Max.
Shorting Caps
Plating
Body—Nickel
Center Contact —Gold
Part No. 413453-1
15.24
[.600]
14.53
[.572]
Dia. Max.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
66
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm
Plugs, Crimp
These connectors have been designed
for optimum performance and have a
true 75 ohm impedance the complete
length of the connector. The crimp die
tooling listed below is different from the
equivalent 50 ohm connectors.
Plugs
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating L 354940-1 or & 626 Pneu.
PRO-CRIMPER Head 318161-1
Adapter 679304-1
179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 5413589-8
179B, 187, 1.160
187A, 161, O Crimp Gold Nickel Polyethelene Commercial 35.56 318451-2 — 5221185-8
BELDEN 9221 1.140
Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 1-5413589-0
AT&T 735A 1.160
O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 1-5221185-8
1.090
Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-2 — 5413589-3
BELDEN 8218 1.160
O Crimp Gold Nickel Polyethelene Commercial 27.69 58174-1 58248-3 5221185-3
1.090
140, 210, 62, 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-2
62B, 59, 59A, 59B, 1.160
BELDEN 9291, O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 58248-2 5221185-2
9209, 9269 1.090
302, BELDEN 89269,
88241, Hi-Temp 62A, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-1
Times PL-62, Berk Tek 1.160
BTDC-59, BTDC-62
BELDEN 8212, 9104, 29.46
9112, 9167, 9240, 9259, Hex Crimp Gold Nickel Polyethelene Commercial 1.160 58425-1 — 5413589-9
9266, Times FM-59,
(RG 59 Type 27.69
with 20 AWG C.C.) O Crimp Gold Nickel Polyethelene Commercial 1.090 58536-1 58248-2 5221185-9
Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-1 — 5413589-7
BELDEN 9145, 1.160
AT&T 734A O Crimp Gold Nickel Polyethelene Commercial 27.69 58536-1 — 1-5221185-0
1.090
BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 25.65 58536-1 — 5221185-1
9114 1.010
6, 6A O Crimp Gold Nickel Polyethelene Commercial 37.85 58538-1 58248-1 5221185-7
1.490
BELDEN 8281, Hex Crimp Gold Nickel Polyethelene Commercial 29.46 58425-3 —5413589-5
9141, 9231, 1.160
Western
Electric 724, O Crimp Gold Nickel Polyethelene Commercial 28.45 58538-1 58248-1 5221185-5
728, 3049 1.120
COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 — 2-5221185-9
S59 Hec 1.140
COMM/SCOPE O Crimp Gold Nickel Polyethelene Commercial 28.96 58536-1 — 3-5221185-1
F59 Hec-z 1.140
L
Max.
14.53
[.572]
Dia. Max.
Hex and O Crimp
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
COMM/SCOPE is a trademark of
Commscope, Inc.
67
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Plugs for JIS Cables, Crimp
Plating
Body—Nickel
Center Contact —Gold
Bulkhead Jacks for JIS
Cables, Crimp
Plating
Body—Nickel
Center Contact —Gold
Dielectric —Polymethylpentene
14.53
[.572]
Dia. Max.
L
Max.
Interchangeable Dies
for PRO-CRIMPER
Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor
PRO-CRIMPER
Adapter 679304-1
3C-2V Hex Crimp Polymethylpentene 29.46 58425-1 1-5413589-1
1.160
2.5C-2V Hex Crimp Polymethylpentene 29.46 58425-2 1-5413589-6
1.160
Interchangeable Dies
for PRO-CRIMPER
Termination Dim. Hand Tool 354940-1 Part No.JIS Cable Type Dielectric Lor
PRO-CRIMPER
Adapter 679304-1
1.5C-2V Hex Crimp 75Ω36.83 58425-2 5413590-4*
1.450
*Packaged in 100 pieces per bag.
20.32
[.800]
Max.
L
Max.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
68
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
14.53 Dia.
[.572] Max.
L
Max.
27.18
[1.070]
Hex and O Crimp
Max.
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating L 354940-1 or & 626 Pneu.
PRO-CRIMPER Head 318161-1
Adapter 679304-1
179, 179A,
179B, 187, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — -5413588-8
187A, 161 pentene 1.553
BELDEN 9221
AT&T 735A Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — 1-5413588-0
pentene 1.553
AT&T KS
19224 L2, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-2 — 5413588-4
RD179 pentene 1.553
Double Braid
140, 210, 62, Hex Crimp Gold Nickel Polymethyl- Commercial 139.45 58425-1 —5413588-2
62A, 62B, 59, pentene 1.553
59A, 59B,
BELDEN 9291, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 58248-2 -5221402-2
9209, 9269 pentene 1.570
BELDEN 8212,
9104, 9112,
9240, 9167,
9259, 9266, Hex Crimp Gold Nickel Polymethyl- Commercial 39.45 58425-1 — 5413588-9
Times FM-59, pentene 1.553
(RG 59 Type
with 20
AWG C.C.)
BELDEN 9145, O Crimp Gold Nickel Polymethyl- Commercial 39.88 58536-1 — 5221402-4
AT&T 734A pentene 1.570
Right-Angle Plugs, Crimp
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
69
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating L 354940-1 or & 626 Pneu.
PRO-CRIMPER Head 318161-1
Adapter 679304-1
179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 — 5413760-8
179B, 161, 1.300
187, 187A, O Crimp Gold Nickel Polyethelene Commercial 30.48 318451-2 — 5221199-5
BELDEN 9221 1.200
BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-2 — 5413760-3
1.300
140, 210, 62,
62A, 62B, 59,
59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 58248-2 5221199-2
BELDEN 9291, 1.200
9209, 9269
302, BELDEN 88241,
89269, Hi-Temp
62A, Times Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 — 5413760-1
PL-62, Berk 1.300
Tek BTDC-59,
BTDC-62
BELDEN 8212,
9104, 9112,
9240, 9167,
9259, 9266, Hex Crimp Gold Nickel Polyethelene Commercial 33.02 58425-1 — 5413760-9
Times FM-59, 1.300
(RG 59 Type
with 20
AWG C.C.)
BELDEN 9248, O Crimp Gold Nickel Polyethelene Commercial 30.48 58536-1 — 5221199-1
9114 1.200
Jacks, Crimp
L
Max.
Hex and O Crimp
11.08 Dia.
[.436] Max.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
70
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
20.32
[.800]
Max.
34.93
[1.375]
Hex and O Crimp
Max.
12.83
[.505 ]
+0.13
-0.20
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Interchangeable
Dies for Interchangeable
RG/U Termination Center Body Dim. PRO-CRIMPER Dies for Hand
Contact Dielectric Style Hand Tool Tool 69710-1 Part No.
Cable Type Plating Plating L 354940-1 or & 626 Pneu.
PRO-CRIMPER Head 318161-1
Adapter 679304-1
179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-8
179B, 161, 1.450
187, 187A, O Crimp Gold Nickel Polyethelene Commercial 34.93 318451-2 — 5221221-5
BELDEN 9221 1.375
AT&T KS
19224 L2, Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-4
RD179 1.450
Double Braid
Hex Crimp Gold Nickel Polyethelene Commercial 36.83 58425-2 — 5413590-3
BELDEN 8218 1.450
140, 210, 62,
62A, 62B, 59,
59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-2
BELDEN 9291, 1.375
9209, 9269
BELDEN 8212,
9104, 9112, 9240,
9167, 9259, 9266, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 58248-2 5221221-7
Times FM-59 1.375
(RG 59 Type with
20 AWG C.C.)
BELDEN 9114, O Crimp Gold Nickel Polyethelene Commercial 34.93 58536-1 — 5221221-1
9248 1.375
Bulkhead Jacks, Crimp
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
AT&T is a trademark of AT&T Corporation.
BELDEN is a trademark of Belden Wire
and Cable Company.
71
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Bulkhead Solder Jacks
Front Mount
Plating
Body—Nickel
Center Contact —Silver
27.43
[1.083]
13.09 Dia.
[.515] Max.
Maximum Panel Thickness 3.18 [.125]
Recommended Panel Cutout
9.75/9.65
[.384./380]
Dia.
4.04/3.96
[.159/.156]
Part No. 5221244-1
(with Solder Terminal)
Bulkhead Solder Jack
Rear Mount
Lockwasher and Jam Nut see page 73.
Plating
Body—Nickel
Center Contact —Gold
Dielectric
—
Polymethylpentene
Bulkhead Jack
PC Board Mount
Accepts
.054 Dia.
Max. Wire
Part No. 5415187-1
(without Solder Terminal)
3/8-32 Thread
Part No. 5414217-1
17.78 Dia.
[.700] Max.
31.75
[1.250]
1/2-28 Thread
Accepts .
.050 Dia.
Max. WIre
Max.
Max.
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
13.09
[.515]
Dia.
Max.
27.43
[1.083] Max.
Accepts
.054 Dia.
Max. Wire
3/8-32 Thread
20.8
[.820]
11.07
[.436] Max.
3.30
[.130]
Ø 12.70 ± 0.1
[.500 ± .004]
11.2 ± 0.1
[.441 ± .004]
Part No. 6274086-1
Note: If insulating bushing required
use part no. 227223-1 or 221951-1
(for details, reference page 55).
Note: If insulating bushing required
use part no. 227223-1 or 221951-1
(for details, reference page 55).
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
72
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Body Center Dimensions Part No.
Contact Without With
Material Plating ABCL
Mounting Posts Mounting Posts
VALOX, Black w/ 6.17 21.21 11.68 2.79 *
Compliant Posts Gold3 .243 .835 .460 .110 —5415105-2
(Economy)*
VALOX, 6.17 21.21 11.68 4.01 *
Black Gold3 .243 .835 .460 .158 —5415105-1
(Economy)*
VALOX, Gold1 6.91 21.21 13.88 3.48 —5413194-1
White .272 .835 .519 .137
VALOX, 6.91 21.21 13.88 3.48 *
White Gold1 .272 .835 .519 .137 —5415634-2
(Economy)*
VALOX, Gold1 6.91 21.21 13.88 3.48 —5413194-2
Black .272 .835 .519 .137
Gold1 6.91 21.21 13.88 3.48 —5415634-1
VALOX, .272 .835 .519 .137
Black
Gold1 8.59 21.21 15.88 3.48 —5415633-1
(Economy)* .338 .835 .625 .137
VALOX, Gold2 8.59 21.21 15.88 3.48 —5414459-1
White .338 .835 .625 .137
Metal Gold1 8.25 20.83 15.88 2.16 —5222092-1
.325 .820 .625 .085
Metal Gold1 8.25 20.83 15.88 —5222093-1 —
.325 .820 .625
Metal Gold1 8.25 20.83 15.88 3.48 —5414409-1
(Economy)* .325 .820 .625 .137
Metal with Gold1 6.91 20.83 12.70 3.48 —5415417-1
Compliant .272 .820 .500 .137
Posts Tin 8.56 21.21 15.88 3.48 —5415419-1
(Economy)* .337 .835 .625 .137
Metal Gold1 8.25 20.83 15.88 3.48 —5222092-3
.325 .820 .625 .137
Metal Gold1 6.91 20.83 12.70 3.48 —5414907-1
.272 .820 .500 .137
Metal Gold1 6.91 20.83 12.70 —6274072-1 —
.272 .820 .500
Metal Gold1 6.91 20.83 12.70 3.48 —6274084-1
(Economy)* .272 .820 .500 .137
**Economy connector uses 50 Ωpart with smaller dielectric and stamped and formed con-
tact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω,
screw machined Beryllium Copper).
Plating:
Gold1 — 0.00076 [.000030] thick
Gold2 — 0.00127 [.000050] thick
Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on
page 54.
C
L
C
L
Recommended PC Board Layouts
Right-Angle Jacks
PC Board/Panel Mount
Outer Shell —Nickel
Dielectric —Polymethylpentene
Lockwasher and Jam Nut see page 73.
AB34.93
[1.375]
C
Mtg. Hgt.
1/2-28 Threads 1/2-28 Threads
VALOX Body
AB34.93
[1.375]
Metal Body
C
Mtg. Hgt.
L
* Screw for panel thickness of 2.38
[3/32] or greater
* Part No. 221108-2.
* Screw for panel thickness of less
than 2.38 [3/32]
* Part No. 221108-4.
Without Mounting Posts
With Mounting Posts
(Top View)
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
GS 0.89 ±0.08
[.035 ±.003]
2.64 [.104] Dia.
Clearance Hole for
2-56 Self-Tapping Screw*
(2 Holes)
5.08 ±0.05
[.200 ±.002]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
Mating
Face
(Top View)
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
GS 0.89 ±0.08
[.035 ±.003]
5.08 ±0.05
[.200 ±.002]Mating
Face
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.13
-0.00
+.005
-.000
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
73
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Vertical Jacks
PC Board/Panel Mount
Plating
Outer Shell —Nickel
Dielectric —Polymethylpentene
VALOX Body Metal Body
Recommended PC Board Layout
L
B34.93
[1.375]
Mtg. Hgt.
15.88
[.625]
1/2-28 Thread
L
B34.93
[1.375]
Mtg. Hgt.
15.88
[.625]
1/2-28 Thread
Body Contact Dim. Dim. Part No.
Material Plating B L
VALOX,
Black Gold1 21.21 3.48 5415632-1
(Economy)* .835 .137
VALOX,
White Gold1 21.21 3.48 5415632-2
(Economy)* .835 .137
Metal Gold1 20.83 3.48 5222132-1
.820 .137
Metal Tin 21.21 3.48 5415520-1
(Economy)* .835 .137
*Economy connector uses 50 Ωpart with smaller dielectric and stamped and
formed contact, Phosphor Bronze contact material (Compare to regular
connector which is 75 Ω, screw machined Beryllium Copper).
Plating:
Gold1 — 0.00076 [.000030] thick
Note: If an Insulating Bushing is required see part number 330620 and
Panel Cutout on page 54.
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.13
-0.00
+.005
-.000
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08
[.035 ±.003]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
GS
(Top View)
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
* Screw for panel thickness of 2.38
[3/32] or greater
* Part No. 221108-2.
* Screw for panel thickness of less
than 2.38 [3/32]
* Part No. 221108-4.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
74
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Vertical Metalized Jacks
PC Board Mount
Plating
Dielectric — TEFLON
A Max.
11.49
[.470]
Dia.
Max.
Recommended PC Board Layout
Style A Style B Style C
Body Center Leg
Contact Style Length Part No.
Plating Plating L
Nickel Gold B 3.30 6274291-2
.130
Tin Gold B 3.30 6274291-1
.130
Tin Gold B 6.35 6274359-1
.250
Tin Gold C 4.44 5414394-1
.175
Nickel Silver A 6.35 5413986-1
.250
Tin Gold F 2.54 6274360-1
.100
6.88 ±0.05
[.271 ±.002]
6.88 ±0.1
[.271 +.003]
–.004 1.5 ±0.1
[.059 +.004]
–.003
3.43 ±0.05
[.135 ±.002]
Recommended PC Board Layout
17.45
[.687]
15.88
[.625]
LL
Press Fit
Vertical Metalized Jacks
PC Board Mount
Dim. Part
ANo.
20.57 5222462-1
.810
16.26 5414088-1
.640
20.57
[.810]
L
Drill Holes for
0.94 ±0.05 [.037 ±.002 ]
Dia. Pin (5 Places)
6.35 ±0.05
[.250 ±.002]
12.7 ±0.08
[.500 ±.003]
6.35 ±0.05
[.250 ±.002]
12.7 ±0.08
[.500 ±.003]
6.88 ±0.05
[.271 ±.003]
6.88 ±0.08
[.271 ±.003]
3.43 ±0.05
[.135 ±.002]
3.44 ±0.08
[.135 ±.003]
3.43 ±0.08
[.135 ±.003]
6.88 ±0.05
[.271 ±.003]
6.88 ±0.08
[.271 ±.003]
2.44 ±0.08
[.096 ±.003]
(4 Holes)
Dia.
1.32 ±0.08
[.052 ±.003]Dia.
(4 Plated-Thru
Holes)
Dia.
1.02 ±0.08
[.040 ±.003]
(Plated-Thru Hole)
Dia.
Insulating Bushing
Material—Nylon
Part No. 222163-1
Only to be used on Part Nos.
5222462-1 and 5222006-1
16.64
[.655]
Sq.
1.50 ±0.08
[.059 ±.003]
(4 Holes)
Dia.
1.02 ±0.08
[.040 ±.003]Dia.
2.96
[.115] Max.
6.61
[.260] Max.
14.61
[.575] Dia.
11.94
[.470]
Dia.
1.02 ± 0.08
[.040 ± .003]
5.16 ± 0.08
[.203 ± .003]
5.16 ± 0.08
[.203 ± .003]
2.578 ± 0.076
[.1015 ± .0030]
Dia.
2.06 ± 0.05
[.081 ± .002]
Dia.
4 Plcs.
2.54
[.100]
14.73
[.580]
5 Plcs.
Style F (Push-On)
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
3.81 ± 0.08
[.150 ± .003]1.19 ± 0.18
[.047 ± .007]
1.78 ± 0.08
[.070 ± .003]
7.62 ± 0.08
[.300 ± .003]
7.62 ± 0.08
[.300 ± .003]
Dia.
Dia.
25.40 ± 0.38
[1.000 ± .015]
11.43 ± 0.43
[.450 ± .017]
21.84
[.860]
17.78
[.700]
11.07
[.436] Max.
Part No. 6274127-1
75
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
Recommended PC Board Layout
6.6 ±0.08
[.260 ±.003]
6.6 ±0.08
[.260 ±.003]
3.3 ±0.08
[.130 ±.003]
1.17 ±0.08
[.046 ±.003]
2.11 ±0.08
[.083 ±.003]
Dia.
(4 holes)
Maximum PC Board Thickness 2.54 [.100]
Dia.
Press Fit, Bulkhead
Vertical Metalized Jack
includes hardware
28.78
[1.133]
4.37 ± 0.51
[.172 ± .020]
5 Plcs.
24.41
[.961]
10.80
[.425]
+ 0.08
– 0.00
+ .003]
– .000
5.54
[.218
+ 0.13
– 0.00
+ .005]
– .000
ø 12.83
[ø .505
Part No. 6274124-2
Recommended
PC Board Layout
C
L6.15
[.242]
10.97
[.432]
Mounting
Height
28.4
[1.118] Max.
17.48
[.688] Sq.
15.88
[.625] Max.
1.7 ±0.05
[.067 ±.002]
(2 Places)
For Drive Screw 6.35 ±0.05
[.250 ±.002]
6.35 ±0.05
[.250 ±.002]
12.7 ±0.05
[.500 ±.002]
12.7 ±0.05
[.500 ±.002]
1.02 ±0.08
[.040 ±.003]
(Plated-Thru
Hole 3 Places)
Press Fit
Vertical Metalized Jacks
PC Board Mount
(Continued)
PC Board Thickness (Min.) Part No.
2.36 5221336-3
.093
3.17 5221336-4
.125
Recommended PC Board Layout
Body Contact Center Part No.
Plating Dielectric Plating Contact
Dimension
Nickel TPX Gold2 .171 [.007] 5413558-1
Tin TEFLON Gold2 .171 [.007] 5413558-2
Nickel TPX Gold2 .131 [.005] 5413558-3
Nickel TPX Gold1 .171 [.007] 5413558-5
Gold1 — 0.00076 [.000030] thick
Gold2 — 0.00127 [.000050] thick
Dia.
Right-Angle Metalized Jacks
PC Board Mount
Ø 1.02 ± 0.08
[.040 ± .003]
3.43
[.135]
6.88
[.271]
3.43
[.135]
6.88
[.271]
Holes Plated
Through 5 Plcs.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TPX is a trademark of Mitsui Chemicals
America, Inc.
76
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
36.07
[1.420] Max.
Ø 15.88 ± 0.25
[.625 ± .010]
BNC Connectors, 75 Ohm (Continued)
Right-Angle Metalized
Jacks
PC Board/Panel Mount
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.64+0.08
-0.00
[.222+.003]
-.000
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.54+0.08
-0.00
[.218+.003]
-.000
Part No. 5222117-1
36.07
[1.420]
11/16
Right-Angle Adapter
(Jack-Plug)
Plating
Body—Nickel
Center Contact —Gold
Dielectric —
Polymethylpentene
22.89
[.901]
Max.
14.53
[.572]
26.97
[1.062]
Part No. 5415020-1
Maximum Panel Thickness 6.35 [.250]
Recommended Panel Cutout
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.54+0.08
-0.00
[.218+.003]
-.000
Recommended
Panel Cutout
Dia.
Max.
Bulkhead Jack-Jack
Adapter
Plating
Body—Nickel
Center Contact —Gold
Dielectric —Polymethylpentene
Part No. 1274935-1
Jack-Jack Adapter
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
Bulkhead Jack-Jack
Adapter
Plating
Body — Nickel
Center Contact — Gold
Dielectric — Polymethylpentene
Body
Plating Dielectric Part No.
Tin TEFLON 6274425-2
1/2-28 Thread
27.64 ± 0.51
[1.088 ±.020]
10.97 ± 0.18
[.432 ±.007]
6.15 ± 0.25
[.242 ±.010]
11.66
[.459]
4.34
[.171]
36.04
[1.419] Max.
Part No. 415567-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
77
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
BNC Connectors, 75 Ohm (Continued)
8.89 ± 0.13
[.350 ± .005]
+ 0.13
– 0.00
+ .005
– .000
Ø 9.65
[.380 ]
Recommended Panel Cutout
Bulkhead Jack-Push On Plug
Adapter
41.92
[1.650]
Ø 14.35
[.565] Max.
Ø 8.43
[.332] Max.
Part No. 1274007-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
78
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Mini BNC Connectors, 75 Ohm
Product Facts
■Bayonet locking coupling
mechanism
■40% more interconnects in
the same area
■Compatible with
TROMPETER tooling
■Ideal for telecommunica-
tions and broadband
applications
Tyco Electronics introduces
the Mini BNC series of
RF connectors to meet the
growing demand for next
generation telecommunica-
tions and broadband
applications where higher
connector densities are
needed. Preserving the
characteristics that have
made the standard BNC
so popular, the Mini BNC
offers the same high per-
formance currently found in
standard Tyco Electronics
BNC series, but offers 40%
more interconnects in the
same area.
The Mini BNC offering is
an excellent fit for 75 Ohm
systems, offering 500 mat-
ing cycles, electrical per-
formance through 2 GHz,
and is completely inter-
mateable with competitive
miniature BNC offerings.
Tyco Electronics’ Mini BNC
product offers the same
advantage of the bayonet
locking mechanism as our
standard BNC, allowing
quicker connect and dis-
connects than standard
threaded interfaces. It uses
standard BNC installation
tooling meaning there is no
need for retraining of field
telco installers, and it uti-
lizes the same PCB footprint
on the jack side, providing a
drop in replacement for DS3
telco applications.
Mini BNC connector config-
urations currently available
include PCB, panel mount,
and flexible cable. Other
options can be reviewed as
well, including additional
cable sizes, adapters, PCB
surface mounting, and tape
and reel packaging. Call
your local sales office or
authorized distributor for
additional information or
samples of the Mini BNC
connector series.
Tyco Electronics is a
leading supplier of RF and
Microwave connectors and
cable assemblies, and pro-
vides advanced technology
products from well known
and industry leading
brands, including AMP
and M/A-COM.
Material and Finish
Shells, Bodies, Mtg Nuts — Brass,
nickel plated
Washers — Stainless Steel, nickel
plated
Ferrule — Copper or Brass, tin plated
Center Contacts — Phos Bronze and
Brass, gold plated
Dielectrics — PTFE
Electrical Characteristics
Frequency — DC – 2 GHz
Nominal Impedance — 75 ohms
Voltage Rating — 300 Volts (VRMS
maximum) @ Sea Level
VSWR —
1.10 max to 500 MHz
(Return Loss -26.4 dB)
1.16 max to 1 GHz
(Return Loss -22.6 dB)
Insulation Resistance —
1,000 megohms minimum
Dielectric Withstanding Voltage —
1,000 Volts (VRMS maximum) @
Sea Level
Contact Resistance —
12 milliohms maximum
Mechanical Characteristics
Connector Durability —
500 mating cycles
Force to Engage —
7 pounds maximum
Force to Disengage —
1 pound minimum
Center Contact Retention —
2 pounds minimum
Cable Retention —
20 pounds minimum
Vibration — EIA-364-28,
Test Condition VII, Condition D
Shock — EIA-364-27, Method H
Environmental Characteristics
Temperature Rating —
–40 to +85°C
Moisture Resistance — EIA-364-31,
Method II, Condition C
Thermal Shock — EIA-364-32
Note: Performance specifications
are typical, but may not apply to all
connector types.
Related Product Data
Product Specification — 108-2159
Sample Kit — 1773042
BNC Mini BNC
32.89
[1.29] Ref. 27.52
[1.08] Ref.
TROMPETER is a trademark of
Trompeter Electronics, Inc.
79
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Mini BNC Connectors, 75 Ohm (Continued)
Interface Dimensions
Mini BNC Jack
Dimensions
ABCDEFGH JK LM
8.89–9.14 7.37–7.62 7.11–7.21 6.63–6.73 6.20–6.30 5.03–5.13 4.39–4.50 1.32–1.42 3.86–4.27 7.70 0.18–0.30 4.01
.350–.360 .290–.300 .280–.284 .261–.265 .244–.248 .198–.202 .173–.177 .052–.056 .152–.168 .303 Min. .007–.012 .158 Min.
Mini BNC Plug
Dimensions
ABCDEFGHJ
7.70–7.80 —0.71–0.76 11.43–11.68 4.27–4.93 0.94–1.35 1.57–1.68 9.60–9.70 2.50–2.59
.303–.307 .028–.030 .450–.460 .168–.194 .037–.053 .062–.066 .378–.382 .098–.102
Dimensions
KLMNPQRST
1.57–1.68 0.64–0.74 1.47–1.57 0.20–0.30 4.62–4.93 2.84–3.38 29°–31° 14°–16° 6.20–6.30
.062–.066 .025–.029 .058–.062 .008–.012 .182–.194 .112–.133 .244–.248
Ø H Reference
Plane
Ø A Ø E
K
J
L
G
F
Ø DØ CØ B
M
S°
K
M
L
J
Ø H
Ø AØ B
Ø D Ø T
Ø C
Ø N Typ.
Q Ref.
Reference
Plane
R° Typ.
G
Q
F
P
E
Contact Types
80
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Mini BNC Connectors, 75 Ohm (Continued)
Flexible Cable — Crimp
Attachment
Straight Cable Plug
Right-Angle Cable Plug
Bulkhead Cable Jack
Cable Part Number
735A 1274563-1
734A 1274563-2
RG 179 1274563-3
Cable Part Number
735A 1274566-1
734A 1274566-2
RG 179 1274566-3
Cable Part Number
735A 1274568-1
734A 1274568-2
RG 179 1274568-3
27.69
[1.090]
Ø 11.56
[.455]
Max.
Ø 11.56
[.455]
22.73
[.895] Max.
23.89
[.940] Max.
R 4.83
[1.90]
4.06
[.160]
7.82
[
.308
]
3/8 - 32 UNEF-2A
Recommended Panel Cutout
Tolerance: ± 0.08 [.003]
0.51
[.020]
13.46
[.530]
26.92
[1.060] Max.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
81
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Mini BNC Connectors, 75 Ohm (Continued)
Printed Circuit Board
Straight Jack Receptacle
Right-Angle Jack Receptacle
Right-Angle Bulkhead Jack
Receptacle
2 Position, Right-Angle,
Bulkhead Jack Receptacle
Part Number
1274571-1
Part Number
1274572-1
Part Number
1274584-1
Description Part Number
With
Hardware 1274663-2
Without
Hardware 1274684-1
13.59
[.535]
2.54
[.100]
12.70
[.500]
9.50
[.374]
24.10
[.949]
7.65
[.301]
24.21
[.953]
Ø 1.27
[.050] Typ.
Ø 7.49
[.295] Typ.
0.51
[.020] Typ.
7.54
[.297] Sq.
0.76
[.030]
Sq.
Typ.
Ø 0.97
[.038]
15.44
[.608]
3.99
[.157]
T
yp
.
15.37
[.605]
10.62
[.418]
6.58
[.259]
3.99
[.157]
Ø 0.97
[.038]
Typ.
7.54
[.297] Sq.
0.76
[.030]
Typ.
Sq.
22.45
[.884]
3.99
[
.157
]
Ø 0.97
[.038]
Ø 10.92
[.430]
Typ.
4.69
[.185]
3.81
[.150]
3/8 - 32 UNEF-2A
8.53
[.336]
8.48
[.334]
0.76
[.030]
Sq. Typ.
7.54
[.297]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
3.94
[.155] Typ.
82
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors
Product Facts
■Built-in chip capacitors
filter high-frequency noise
to panel ground
■PC board mounting with
vertical and standard or
low-profile right-angle
configurations
■Cable mount bulkhead BNC
version available
■Drop-in replacement for
Tyco Electronics standard
BNC printed circuit board
connectors
■One-piece design and
robotic capacity to reduce
assembly time
Tyco Electronics capaci-
tively decoupled connectors
provide the fast, better way
to reduce noise and reduce
ground loops on coaxial
interconnections. The high-
frequency noise generated
by fast rise times can cause
both false triggering of
circuits as well as emissions
that can be radiated or
conducted outside the
equipment. Such emissions
can interfere with nearby
equipment. Ground loops
are also a problem for net-
worked systems. Ground
loops are caused when two
interconnected units are at
different voltage potentials.
The typical way to handle
such EMI and ground loop
problems is to decouple
the cable shield from the
ground panel by soldering
a ceramic disk capacitor
between the cable shield
and the panel. The capaci-
tor shunts high-frequency
noise to ground. While
effective, this approach
is time consuming and
expensive.
The Capacitively Decoupled
connector has built-in chip
capacitors. These capaci-
tors establish the electrical
contact between the outer
shield and a clip. This clip
provides a short electrical
path between the capaci-
tors and panel. As a result,
high-frequency noise is
effectively shunted to
ground, while the DC path
is blocked.
The connectors offer com-
patibility in design and
manufacture. The same
footprint and dimensional
envelope make them a
drop-in replacement for
Tyco Electronics standard
BNC or TNC printed circuit
board connectors. In addi-
tion, they can be robotically
picked and placed for high-
speed automated assembly
to pc boards.
Product Specification
108-1263 — BNC Decoupled PCB
Press-Fit Connection
108-1269 — BNC Decoupled PCB
Connectors
108-1490 — BNC Decoupled Cable
Mount
Decoupled Connectors (Continued)
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.54+0.08
-0.00
[.218+.003]
-.000
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.54+0.08
-0.00
[.218+.003]
-.000
10.16 ±0.08
[.400 ±.003]
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08
[.035 ±.003]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
(Top View)
GS
5.08 ±0.05
[.200 ±.002]
5.08 ±0.05
[.200 ±.002]Mating
Face
GS
(Top View)
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
5.08 ±0.05
[.200 ±.002]
2.54 ±0.05
[.100 ±.002]
0.89 ±0.08
[.035 ±.003]
2.01 ±0.08
[.079 ±.003]
(2 Holes)
5.08 ±0.05
[.200 ±.002]
34.93
[1.375]
15.08
[.625]
20.96
[.825]
PC Board/Panel Mount
Jacks Decoupled to Panel
Material
Body—VALOX, black
Dielectric —Polymethylpentene
34.93
[1.375]
20.96
[.825]
B
A
C
L
Style B
Right-Angle BNC
Style A
Vertical BNC
Recommended PC Board Layout
Note: Both styles are shown with a
standard clip. See next page for
other clip styles.
For height dimensions see chart on
page 85.
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
Recommended PC Board Layout
83
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
VALOX is a trademark of General Electric
Company.
84
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors (Continued)
Clip Styles
Extended
For use with or without a jam nut
Short Electrical Path
For reduced series inductance in ground path
Shortening
Bar
Standard
20.96
[.825]
19.30
[.760]
Max.
Clip Width
2.54
[.100]
Max.
Recommended
Panel Mount
.304
[.012]
20.96
[.825]
Flush
For closer centerline-to-centerline connector spacing
14.76
[.581] Clip
Width
20.96
[.825]
2.54
[.100]
Max.
Recommended
Panel Mount
.304
[.012]
20.96
[.825]
Decoupled Connectors (Continued)
PC Board/Panel Mount
Jacks Decoupled to Panel
(Continued)
L
L
Mounting Post Styles
Standard Compliant
Capacitance/ Mounting LPart
Description Voltage Clip Post Mounting B* A* Style1No.
Post Length
Vertical 9400pF Standard Standard 3.48 —— A5413476-2
501500VDC .137
9400pF Standard Standard 4.01 15.88 8.59 B5413524-2
Standard 1500VDC .158 .625 .338
Right-Angle 9400pF Standard Compliant 2.79 15.88 8.59 B5413524-5
501500VDC .110 .625 .338
Standard Right-Angle 9400pF Standard — — 15.88 8.59 B5414215-1
W/O Mounting Post 5021500VDC .625 .338
9400pF Standard Standard 4.01 13.18 6.91 B5413515-2
1500VDC .158 .519 .272
20000pF Standard Standard 4.01 13.18 6.91 B5413515-3
500VDC .158 .519 .272
Low Profile 7900pF Standard Compliant 2.79 13.18 6.91 B5413515-7
Right-Angle 1600VDC .110 .519 .272
509400pF Standard Compliant 4.70 13.18 6.91 B5413515-8
1500VDC .185 .519 .272
9400pF Standard Compliant 2.79 13.18 6.91 B5413515-9
1500VDC .110 .519 .272
Low Profile Right-
Angle W/Special Clip 9400pF Extended Compliant 2.79 13.18 6.91 B5414284-2
& High Temperature 500VDC .110 .519 .272
Housing 50
Low Profile
Right-Angle 9400pF Flush Compliant 4.70 13.18 6.91 B5414352-1
W/High Temperature 500VDC .185 .519 .272
Housing 50
Low Profile 9400pF Standard Standard 4.01 13.18 —B5414094-2
Right-Angle 751500VDC .158 .519
9400pF Standard Standard 4.01 6.17 11.68 —5415103-1
Ultra Low Profile 1500VDC .158 .243 .460
Right-Angle 9400pF Standard Compliant 2.79 6.17 11.68 —5415103-2
75 1500VDC .110 .243 .460
1See pages 83 and 84 for Connector Styles.
2See customer drawing for PC Board Layout.
*See page 83 for dimension reference.
BNC
85
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
86
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Decoupled Connectors (Continued)
Capacitance/ Contact Mounting LPart
Description Voltage Plating Clip Post Mounting B* A* No.
Post Length
50Product
Low Profile
Right-Angle 7900pF Gold1 Standard Compliant 2.79 13.18 6.91 5414651-3
W/ ESD Protection 1500VDC .110 .519 .272
75Product
Standard
Right-Angle 9400pF Gold1 Standard Standard 4.01 15.88 8.59 5415085-1
W/ ESD Protection 1500VDC .158 .625 .338
Low Profile 9400pF 2.79 13.18 6.91
Right-Angle 1500VDC Gold1 Flush Compliant .110 .519 .272 5415216-1
ESD Protected
*See page 83 for dimension reference.
Right-Angle BNC Jack
PC Board/Panel Mount
Decoupled to Panel
ESD Protected
See page 83 Style B for panel
cutout and recommended PC board
configuration.
ESD Device ESD
Protection
1/2-28 Thread
Note: See Tyco Electronics Customer drawing for voltage breakdown rating.
Right-Angle BNC Jack
PC Board/Panel Mount
Decoupled to Board
ESD Protected
Recommended PC Board Layout Recommended Panel Cutout
Part No. 5415205-1
Capacitance Voltage
9400pF 1500VDC
10.16 ± 0.08
[.400 ± .003]
5.08 ± 0.05
[.200 ± .002]
2.54 ± 0.05
[.100 ± .002]
0.89 ± 0.08
[.035 ± .003]
Dia.
2 Holes
2.01 ± 0.08
[.079 ± .003]
Dia.
2 Holes
11.13 + 0.13
- 0.00
+ .005
- .000
[.438 ]
12.83 + 0.13
- 0.00
+ .005
- .000
[.505 ]
Dia.
13.18
[.519]
Compliant
Board Lock
ESD
Device
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Decoupled Connectors (Continued)
Press-Fit, Vertical BNC
Jacks, PC Board Mount
Decoupled to Board
Material
Dielectric—TEFLON
Isolation Pad —Polyester
Plating
Body—Nickel
Ground Clip —Nickel
Center Contact —Gold
Action Pin Legs —Gold
Part No. 5414553-1 50 Ohm
Part No. 5414493-4 75 Ohm
BNC Bulkhead Jacks,
Crimp
17.48
[.688]
Interchangeable
RG/U Termination Center Body Dies for Hand
Description Contact Dielectric Style Tool 69710-1 Part No.
Cable Type Plating Plating & 626 Pneu.
Head 318161-1
50RG 58, 58A, 58B, 58C Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-1 5414758-1
50RG 174, 174A, 316, 188, 188A Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-3 5414758-2
50RG 174, 174A, 316, 188, 188A Hex Crimp Gold Nickel Polymethylpentene Commercial 58436-3 5414758-3
75 ESD RG 179, 187 Hex Crimp Gold Nickel Polymethylpentene Commercial 58425-2 5415779-1
16.51
[.650]
Max.
over
points
Sq.
15.88
[.625] Max.
40.64
[1.600] Max.
Recommended Panel Cutout
12.83+0.13
-0.00
[.505+.005]
-.000
Dia.
5.54+0.08
-0.00
[.218+.003]
-.000
12.70
[.500]
6.35
[.250]
12.70
[.500]
6.35
[.250]
1.70
[.067]
2 Plc.
Plated Thru Hole
For Drive Screw
Dia.
1.02 ±0.08
[.040 ±.003]
3 Plc.
Plated Thru Hole
Dia.
Ground Area 9.14 [.360] Dia. OD
6.35 [.250] Dia. ID
Recommended PC Board Layout
87
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
88
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Self-Terminating PC Board Connectors
Product Facts
■Built-in chip resistor termi-
nates the signal line to the
proper characteristic imped-
ance when in the unmated
state
■Can be ordered with stan-
dard resistance values (50,
75 and 100 Ohms)
■Fits into printed circuit
board footprint of standard
BNC PCB connectors
■One-piece design is com-
patible with robotic inser-
tion and wave soldering
Tyco Electronics Self-
Terminating printed circuit
board BNC connectors pro-
vide the capability to auto-
matically terminate an
input-output port to the sys-
tem characteristic imped-
ance. This feature
eliminates the need for
external terminators when
an I/O port is not being
used. The Self-Terminating
BNC jack contains a chip
resistor which bridges the
signal and ground paths
when the connector is not
mated to a BNC plug.
When mated, the resistor is
switched out of the circuit
for direct signal transmis-
sion to the board.
The footprint of this connec-
tor is compatible with stan-
dard BNC connectors,
allowing it to be easily
installed into existing circuit
board designs and suitable
for robotic insertion for high
speed automated assembly
onto the PC board.
The Self-Terminating BNC is
available in standard resist-
ance values for use in net-
working and video systems.
Contact Tyco Electronics for
new designs that include
switching and capacitively
decoupled versions.
Material
Body—Polyester, PBT, black
Dielectric —Polyester, PBT, natural
Plating
Shell —Tin
Center Contact —Gold on mating end
and Tin on solder tails
14.73
[.580]
15.86
[.625]
1/2-28UNEF-2A
34.96
[1.375]
20.96
[.825]
Product Termination Part
Resistance Number
Self-Terminating BNC PCB 75Ω5414367-2
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Twin BNC Connectors
Product Facts
■ Crimp connectors require
only one-stroke crimping of
both conductors, plus braid
and cable support
■ Lower installed cost with
one-stroke crimp
■ Reduced noise levels
because of Tyco Electronics
solderless crimping tech-
niques
■ Captive inner contact
stability
■ No danger of heat damage
to coaxial cable
■ Ease of inspection
■Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
■PC Board soldered connec-
tors are recognized under
the Component Program of
Underwriters
Laboratories Inc.,
File No. E81956
■Certified by Canadian
Standards
Association
File No. LR 7189
R
R
R
The Twin BNC Connector
is a quick connect/discon-
nect, weatherproof connec-
tor designed in accordance
with MIL-C-39012 to meet
the stringent requirements
of MIL-STD-1553 Multiplex
Data Bus.
These twin coaxial
cable connectors are a
unique development by
Tyco Electronics which has
resulted in the production of
high level RF components.
Termination of these con-
nectors to twin conductor
cable is made with
Tyco Electronics exclusive
one crimp method which
simultaneously terminates
inner conductors, outer
braid and cable support
with one stroke of the
matching Tyco Electronics
tool.
These rugged connectors
accommodate today’s most
commonly used twin con-
ductor cable sizes.
Electrical Characteristics
Nominal Impedance —Non-constant
Working Voltage —500 volts rms
sea level
Insulation Resistance —
5000 megohms min.
Dielectric Withstanding Voltage—
1500 volts rms sea level
Mechanical Characteristics
Mating/Unmating —
Bayonet lock-quick connect/ disconnect
Cable Attachment —Crimp type -
Simultaneous center and braid
Coupling Nut Retention —100 lbs.
[444 N] min.
Cable Retention —25 lbs.
[111 N] min., RG 108A/U cable
Durability—200 cycles per
MIL-C-39012
Environmental Characteristics
Temperature Range —
-55°C to +85°C
Vibration —MIL-STD-202,
Method 204, Condition B
Shock —MIL-STD-202, Method 213,
Condition I, 100 G’s
Salt Spray —MIL-STD-202,
Method 101, Condition B
Temperature Cycling —MIL-STD-
202, Method 102, Condition C
Materials
Brass —QQ-B-626
Beryllium Copper —QQ-C-530
TEFLON—MIL-P-19468
Polypropylene —General purpose
Copper, Annealed —QQ-C-576
Phosphor Bronze —QQ-B-750
Silicone Rubber —ZZ-R-765
Plating
Silver—QQ-S-365
Nickel —QQ-N-290
Tin —ASTM-B-545
Packaging —All connectors are pack-
aged individually unless otherwise
noted.
89
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
90
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Twin BNC Connectors (Continued)
Plugs
Bulkhead Jack
H= 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points
33.74 Max.
[1.328]
14.61 Dia.
[.575] Max.
38.1 Max.
[1.500]
H
11.05
[.435 ]
+0.13
-0.00
+.005
-.000
Maximum Panel Thickness 3.18 [.125]
Recommended Panel Cutout
RG/U Center Body Integral Die
Contact Dielectric
Cable Plating Plating Hand Tool Part No.
108, 108A Silver Silver TEFLON 69667 5332225
BELDEN 9272, 89272 Silver Nickel Polypropylene 69667 5332225-5
TROMPETER Silver Silver TEFLON 69667 5332225-3
TWC-124-2
ROLM 49D2401 Silver Nickel Polypropylene 69667 5332225-6
RAYCHEM 7824D013
CERTI-CRIMP Die Insert for
RG/U Center Body Hand Tool Integral Die Tools: Hand
Cable Contact Plating Dielectric with Hand Tool Tool-69710-1, Part No.
Plating Integral Die 626 Pneu. Head
318161-1
108, 108A Silver Silver TEFLON -5—69667 69708 5332342
BELDEN 9272, 89272
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
ROLM is a trademark of the Rolm Corp.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
TROMPETER is a trademark of
Trompeter Electronics, Inc.
91
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Twin BNC Connectors (Continued)
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
Right-Angle
PC Board/
Panel Mount Jacks
Material
Body—VALOX, White
Center Contacts —Gold
Dielectric —Polymethylpentene
Vertical
PC Board/
Panel Mount Jacks
Material
Body—VALOX, White
Center Contacts —Gold
Dielectric —Polymethylpentene With Mounting Posts
Part No. 5221198-1
15.88 Mtg.
[.625] Hgt.
36.83 Max.
[1.450]
With Mounting Posts
Part No. 5228686-1
Maximum Panel Thickness 6.1 [.240]
Recommended Panel Cutout
2.01 ±0.05
[.079 ±.002]
(2 Holes)
Dia.
0.89 ±0.08
[.035 ±.003]
(3 Holes)
Dia.
Recommended PC Board Layout
Recommended PC Board Layout
Lockwasher and Jam Nut
Part No.
1-329632-2 Part No.
1-329631-2
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
6.35 ±0.08
[.250 ±.003]2.54 ±0.08
[.100 ±.003]
5.08 ±0.08
[.200 ±.003]
10.16 ±0.08
[.400 ±.003]
3.2 ±0.08
[.126 ±.003]
1.6 ±0.05
[.063 ±.002]
35.56
[1.400]
Mtg.
Hgt.
2.01 ±0.05
[.079 ±.002]
(2 Holes)
Dia.
0.89 ±0.05
[.035 ±.002]
(3 Holes)
Dia.
2.54 ±0.08
[.100 ±.003]
5.08 ±0.08
[.200 ±.003]
5.08 ±0.08
[.200 ±.003]
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
3.2 ±0.13
[.126 ±.005]
1.6 ±0.05
[.063 ±.002]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
VALOX is a trademark of General Electric
Company.
92
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Twin BNC Connectors (Continued)
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
5.54
[.218 ]
+0.08
-0.00
+.003
-.000
H= 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points
Part No. 5332215
Recommended Panel Cutout
H
35.72 Max.
[1.406]
Maximum Panel Thickness 3.18 [.125]
Bulkhead Jack
Adapter
Plating
Body—Silver
Center Contacts —Silver
Dia.
5.08 ±0.08
[.200 ±.003]
3.48 ±0.08
[.137 ±.003]
1.17 ±0.08
[.046 ±.003]
Dia.
0.89 ±0.05
[.035 ±.002]
2 Plcs.
Dia.
2.01 ±0.05
[.079 ±.002]
2 Plcs.
10.16 ±0.08
[.400 ±.003]
10.16 ±0.08
[.400 ±.003]
3.20 ±0.13
[.126 ±.005]
Part No. 5415832-1
Recommended Panel Cutout
Vertical
PC Board Mount
Jack
Plating
Body—Nickel
Center Contacts —Gold
Dielectric —Polymethylpentene
PCB Configuration
12.83
[.505 ]
+0.13
-0.00
+.005
-.000
Dia.
11.05 ±0.08
[.435 ±.003]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
93
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
F Series and G Series Connectors
Product Specification
108-1518 — Connector Coaxial,
FSeries, RF, Single Crimp Plug
108-1643 — Connector Coaxial,
FSeries, RF, PCB Mounted
108-1755 — Connector Economy,
FSeries, RF Coaxial, PCB
108-1757 — Connector, 15 amp,
GSeries Jack, PCB
108-1758 — Connector, F Series Jack,
PCB, Surface Mount
108-1629 — Feedthrough, Sealed
FPort Jack
Instruction Sheets
408-9221 — Coaxial Series F Plug
Connectors
408-4402 — Series F & G Coaxial
Cable Bulkhead Jack Connector
408-4291 — PRO-CRIMPER II Hand
Tool Assembly 58622-1 and 58622-2
Tyco Electronics F Series
connectors offer perform-
ance, which is driven by
evolving OEM requirements
and expectations. Improved
VSWR beyond 1 GHz, high
current carrying capability,
and pressure sealed prod-
ucts are now part of the
standard product offering.
Designs compliant with
ANSI/SCTE, Bellcore,
UL/CSA, and various other
industry and agency stan-
dards are also available.
Both cable applied and
PCB terminated products
are offered in a variety of
styles. The cable connec-
tors are designed for fast,
accurate termination with
tools common to the
industry. Application cost
reductions can be achieved
using Tyco Electronics PCB
terminated products; press-
fit designs eliminate the
need for soldering. Center
of gravity control and PCB
retention designs prevent
tipping and eliminate
fixturing during soldering.
Integral mechanical keys
and “D flats” prevent
rotation in panels.
These products provide the
highly reliable, cost-effective
solutions demanded by
today’s evolving marketplace.
Product Facts
■Designs meet SCTE
requirements where
applicable
■Plugs, jacks and adapters
available
■Board mount and cable
mount available
■Surface mount connectors
available
■Sealed product available
■High current carrying
capabilities
94
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
F Series Connectors
Plugs
RG/U Termination Body “B” PRO-CRIMPER†
Cable Type Plating Style Threads Hand Tool Assembly Part No.
6Crimp Nickel A — 58425-3, 58436-2, 221539-2
or 58621-2
6Screw-On Nickel B M7x1 — 221540-2
59 58425-3, 58436-2,
BELDEN 9104, Crimp Nickel C — or 58621-2 414766-1
9100*
58425-3, 58436-2,
59 Crimp Nickel C — or 58621-2 414766-8
*NID to inside cable.
† 8.23 [.324] Hex Crimp.
Crimp Style
AScrew-On Style
BCrimp Style, Hex
C
21.59
[.850] Max.
RG/U Termination Center Body Termination Part No.
Cable Type Contact Plating Tooling
Plating
179 Braid: M 22520/5-01 w/ DANIELS
5415226-1
Headend Crimp Tin Nickel Die Set Hx4-1637 (.128 Hex)
Patch Panel Contact: M 22520/2-01 w/
DANIELS Positioner K727, Pos. 2
Right-Angle Plugs, Crimp
RG/U Termination Center Contact Body Termination
Cable Type Plating Plating Tooling Part No.
6Crimp Tin Nickel use .324 inch Hex 887098-1
Std. Cable
1.50
[.059 ]
± 0.30
± .012
[.413 ]
10.50 ± 0.20
± .008
39.11
[1.540 ]
± 0.20
± .008
9.40
[.370]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
95
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
F Series Connectors (Continued)
Bulkhead Jacks, Crimp,
Rear Mount RG/U Center Contact Body Die Set Part No.
Cable Plating Plating
179 Bright Nickel 220210-1* 5415712-1
Tin
**Use with hand tool 354940-1
Bulkhead Jacks, Crimp,
Splash Resistant,
Front Mount
RG/U Center Contact Body Die Set Part No.
Cable Plating Plating
179 Bright Nickel 220210-1**5415569-2
Tin
**Use with hand tool 354940-1
Right-Angle
PC Board Mount
Jacks
C
B
A
[.380 ] Dia.
9.65 – 0.00
+ 0.13
+ .005
– .000
8.89
[.350 ]
– 0.00
+ 0.13
+ .005
– .000
0.99 ± 0.08
[.039 ± .003]
4.11 ± 0.08
[.162 ± .003]
8.20 ± 0.08
[.323 ± .003]
2.50 ± 0.08
[.098 ± .003]
4 Plcs.
Body Plating Center Contact Dimensions Part
Barrel Base Plating ABC No.
Nickel Tin Tin 29.97 17.53 12.19 5887078-1
1.180 .690 .480
Recommended Panel Cutout PC Board Layout
Dia.
9.65
[.380 ]
– 0.00
+ 0.13
+ .005
– .000
0.99 ± 0.08
[.039 ± .003]
4.11 ± 0.08
[.162 ± .003]
8.20 ± 0.08
[.323 ± .003]
2.50 ± 0.08
[.098 ± .003]
4 Plcs.
Recommended Panel Cutout PC Board Layout
Body Plating Center Contact Dimensions Part
Barrel Base Plating ABC No.
Nickel Tin Tin 25.40 14.48 15.90 5415302-1
1.00 .570 .626
Nickel Tin Tin 31.75 14.48 22.25 5415302-2
1.250 .570 .876
C
B
A
*Connectors willl accept a center
conductor, diameter of 0.51-1.19
[.020-.047]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
96
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
F Series Connectors (Continued)
Right-Angle
PC Board Mount Jack,
High Temperature
9.65
[.380 ]
Dia.
– 0.00
+ 0.13
+ .005
– .000
– .000
8.89
[.350 ]
– 0.00
+ 0.13
+ .005
0.99 ± 0.08
[.039 ± .003]
4.11 ± 0.08
[.162 ± .003]
8.20 ± 0.08
[.323 ± .003]
2.50 ± 0.08
[.098 ± .003]
4 Plcs.
Dielectric Solder Post Dimensions Part
Bottom Middle Front Plating ABC No.
Acetal Acetal Polypropylene Nickel 35.61 16.89 26.11 5415024-1
1.402 .665 1.028
Acetal Acetal Polypropylene Tin 35.61 16.89 26.11 5415024-3
1.402 .665 1.028
PTFE PTFE PTFE Tin 25.40 17.91 14.99 5415214-1*
1.00 .705 .590
*Pin in paste reflow / high temperature processing.
Recommended Panel Cutout PC Board Layout
Right-Angle
PC Board Mount
Jacks (Continued)
9.65
[.380 ]
Dia.
– 0.00
+ 0.13
+ .005
– .000
8.03
[.316 ]
– 0.00
+ 0.13
+ .005
– .000
2.26
[.089 ]
4 Plcs.
± 0.08
± .003
0.99
[.039 ]
± 0.08
± .003
4.57
[.180 ]
± 0.08
± .003
9.14
[.360 ]
± 0.08
± .003
5.77
[.227 ]
± 0.08
± .003
Recommended Panel Cutout PC Board Layout
Body Plating Center Contact Dimensions Part
Barrel Base Plating ABC No.
Nickel Tin Tin 33.81 15.75 19.86 5415276-2*
1.331 .620 .782
*Connector will accept center conductor diameter range of 0.56-1.19 [.022-.047].
C
B
A
C
B
A
*High temperature versions use PTFE
dielectric (see table)
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
97
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
F Series Connectors (Continued)
Adapters
Vertical PC Board Mount
Jacks
Connector will accept a center conduc-
tor diameter of 0.56–1.19 [.022–.047]
4.32 ± 0.08
[.170 ± .003]
8.64 ± 0.08
[.340 ± .003]
8.64 ± 0.08
[.340 ± .003]
2.77 ± 0.08
[.109 ± .003]
4 Plcs.
1.22 ± 0.08
[.048 ± .003]
4.32 ± 0.08
[.170 ± .003]
PC Board Layout
Part No. 5415322-2
Surface Mount,
Straddle Jack
Contact will accept center conductor
diameter range 0.56–1.19 [.022–.047]
Center of gravity balanced for automated
pick and place and anti-tipping during
solder reflow process.
15.88
[.625]
1.91
[.075]
2 Plcs.
13.21
[.520]
R 1.27
[.050]
14.61
[.575]
9.40
[.370]
18.29
[.720]
12.95
[.510]
0.76
[.030]
Typ.
1.78
[.070]
1.65
[.065]
Typ.
Recommended PC Board Layout
Jack to Jack
Feed through Adapter Jack to Plug
Right-Angle Adapter
Part No. 282938-2 Part No. 5887089-1
16.0
[.630]
9.50
[.374]
23.62
[.930]
Dia.
9.65
[.380 ]
– 0.00
+ 0.13
+ .005
– .000
Recommended Panel Cutout
Part No. 6274020-1
9.50
[.374]
13.49
[.531]
Sq.
Typ.
8.64 ± 0.08
[.340 ± .003]
1.07 ± 0.05
[.042 ± .002]
4 Plcs.
1.37
[.054]
4.32
[.170]
4.32
[.170]
8.64
[.340]
2.36
[.093]
8.64
[.340]Typ.
4 Plcs.
Typ.
PC Board Layout
36.45
[1.43]
Part No. 5887046-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
98
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
G Series Connectors
Bulkhead Jack, Crimp RG/U Termination Body
Cable Type Plating Part No.
179 Crimp Nickel 5415683-1
Te r mination Tooling: Use 220210-1 die set for Contact only.
Use Certi-Crimp Hand Tool 220009-1 for ferrule.
Bulkhead Jack, PC Board
Connector will accept center conductor
diameter range 0.97–1.65 [.038–.065]
(415332-1 only)
9.73 – 9.58
[.383 – .377]
8.15 – 8.00
[.321 –.315]
Recommended Panel Cutout
for 5415332-1
9.73 – 9.58
[.383 – .377]
Recommended Panel Cutout
for 6274032-1
Part No. 5415332-1 (15 Amp)
Part No. 6274032-1
Jack, Bulkhead
PC Board
Connector will accept center conductor
diameter range 0.97–1.07 [.038–.042]
Part No. 5887000-1
2.08
[.082]
4 Plcs.
7.62
[.300]
3.81
[.150]
1.27
[.050]
Typ.
Typ.
7.62
[.300]
Typ.
2.03
[.080]
Typ.
1.32
[.052]
Typ.
Part No. 6274045-1
Vertical PC Board
Mount Plug
PC Board Layout
Right-Angle
PC Board Mount Plug
Includes board retention feature to
prevent tipping during solder process.
10.29 ± 0.08
[.405 ± .003]
9.14 ± 0.08
[.360 ± .003]
1.93 ± 0.08
[.076 ± .003]
4 Plcs.
0.89 ± 0.08
[.035 ± .003]
1.37 ± 0.08
[.054 ± .003]
4.57 ± 0.08
[.180 ± .003]
PC Board Layout
Part No. 5415406-2
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
99
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
G Series Connectors (Continued)
Adapters
F Jack to G Plug
Bulkhead Adapter
Connector will accept center conductor
diameter range of 0.51–1.19
[.020–.047].
Panel nut 887003-3 available for float
mounting.
Part No. 415523-1
12.95
[.510]
11.30
[.445]
Recommended Panel Cutout
F Jack to G Jack
Bulkhead Adapter
Part No. 415327-1
+ 0.13
– 0.00
+ .005]
– .000
9.65
[.380
Dia.
Recommended Panel Cutout
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
100
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors
Tyco Electronics offers
a complete line of SMA
connectors designed for
performance to 18 GHz to
satisfy the growing demand
for SMA connectors in the
wireless communications
industry. The SMA product
line offers stainless steel
bodies, as well as non-
ferrous metals. Various
plating options are available,
including Gold and White
Bronze. The SMA interface
is fully compatible with
Mil-C-39012.
While still offering various
options on military (QPL)
approved connectors,
Tyco Electronics has devel-
oped a complete offering
tailored to the commercial
Communications industry.
This includes 3 piece flexi-
ble cable products for pop-
ular RG 316, 142 and RD
316 cable utilizing industry
standard HEX crimps.
The SMA series meets the
performance, quality and
application requirements
of the commercial market-
place. This includes White
Bronze plating, a unique
finish developed by
Tyco Electronics to address
the performance needs of
the telecommunications
market. This plating is highly
resistant to wear, and con-
tains no ferrous metals, thus
displaying excellent inter-
modulation characteristics.
To satisfy the broad range
of commercial applications,
SMA connectors are avail-
able in a broad range of
standard configurations
including; straight and
right-angle cable applied
plugs, bulkhead cable
jacks, two and four hole
flange mount panel jacks,
straight and right-angle pcb
mount jacks and various
between and in series
adapters. Numerous pack-
aging and testing options
are also available to meet
specific system criteria
as well.
Additionally, standard
military approved (QPL)
interfaces are offered as
well. Including connectors
for semi-rigid cable and
micro strip applications.
The 3 Piece SMA offering
is designed especially
for applications in cellular
infrastructure where
InterModulation Products
(IMP) must be minimized.
By limiting non-linearities
within the connectors, IMP
is reduced and increased
channel capacity can be
offered.
Product Facts
■Performance to 12.4 GHz
and beyond
■Available in various base
metal options, including
stainless steel, brass and
zinc diecast
■Uses industry standard
crimp tools and processes
■Available with corrosion
resistant, non-magnetic
White Bronze plating
■Meets all performance
requirements for
MIL-C-39012.
Between Series Adapters
For SMA Between Series Adapters, see
pages 251-260.
SMA Connectors (Continued)
MIL-C-39012
Applicable Paragraph
General
Material 3.3 Steel corrosion resistant per ASTM-A-582 and ASTM-A-484, Type 303. Beryllium copper per
ASTM-B-196. PTFE Fluorocarbon per ASTM-D-1710.
Finish 3.3.1 Center contacts shall be gold plated to a min. thickness of .00127 [.00005] in accordance with
MIL-G-45204, ASTM-B-488. All other metal parts shall be finished as to provide a connector
which meets the corrosion requirements.
Design 3.4 The design shall be such that the outline shown in this catalog and the interface dimensions of
MIL-STD-348A are met.
Electrical
Insulation Resistance 3.11 The insulation resistance shall not be less than 10,000 megohms.
Corona Level 3.22 Refer to applicable military slash sheet, product drawing or spec.
Dielectric Withstanding Voltage 3.17 Refer to applicable military slash sheet, product drawing or spec.
RF High Potential 3.23 Refer to applicable military slash sheet, product drawing or spec.
Contact Resistance 3.16 Refer to applicable military slash sheet, product drawing or spec.
VSWR 3.14 Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on
cable used.
RF Leakage 3.26 Refer to applicable military slash sheet, product drawing or spec.
Insertion Loss 3.27 Refer to applicable military slash sheet, product drawing or spec. Frequency range dependent on
cable used.
Mechanical
Force to Engage 3.5.1 The torque required to engage and disengage shall not exceed 2 in.-lbs. The longitudinal force is
not applicable.
Coupling Nut Retention 3.25 60 lbs. min. Applicable for plug connectors only.
Coupling Proof Torque 3.6 15 in.-lbs. min. Applicable for plug connectors only.
Cable Retention 3.24 Refer to applicable military slash sheet or consult factory.
Mating Characteristics 3.7 Applicable to jack connectors only. Reference MIL-STD-348A for dimensions; oversize test pin
.953 [.0375] min. dia., .76 - 1.14 [.030-.045] deep, insertion force 3 lbs. max. with .940 [.0370]
min. dia. pin, withdrawal force 1 oz. min. with .902 [.0355] max. dia. pin.
Connector Durability 3.15 The connector to be tested and its mating connector shall be subjected to 500 insertion and
withdrawal cycles at 12 cycles per minute max. The connector shall show no evidence of
mechanical failure and shall meet the mating characteristic requirements.
Recommended Mating Torque — 7 to 10 in.-lbs.
Environmental
Vibration 3.18 Specification MIL-STD-202, method 204, test condition D
Shock 3.19 Specification MIL-STD-202, method 213, test condition I
Thermal Shock 3.20 Refer to applicable military slash sheet or consult factory.
Corrosion (Salt Spray) 3.13 Specification MIL-STD-202, method 101, test condition B.
Moisture Resistance 3.21 Specification MIL-STD-202, method 106. No measurements at high humidity. Insulation
resistance shall be at least 200 megohms within 5 minutes of removal from humidity.
Specifications
101
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
102
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Electrical
Contact Resistance Insulation Dielectric Corona RF High
Frequency VSWR (milliohms max.) Resistance Withstanding Extinction RF Potential RF
Connector Type Cable Max. x (fGHz) Center Outer (megohms Voltage Voltage at Transmission at 5 MHz Leakage
(GHz) Contact Contact min.) (Volts RMS) 70,000 Ft. Loss (V RMS) (dB min.)
(V RMS min.)
Straight Cable Plug RG 402 (3.58 [.141]) Note 1 1.02 + .005 N/A 2.0 10,000 N/A 250 N/A 670 -(90-fGHz)
without Contact
RG 405 (2.16 [.085]) 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 .03 √-f(GHz) 670 -(90-fGHz)
RG 402 (3.58 [.141]) 18.0 1.05 + .005 2.0 2.0 10,000 1500 375 .03 √-f(GHz) 1000 -(90-fGHz)
Straight Cable Plugs 3.58 [.141] Microporous 18.0 1.05 + .005 2.0 2.0 10,000 1500 375 .03 √-f(GHz) 1000 -(90-fGHz)
& Jacks Solder RG 401 (6.35 [.250]) 18.0 1.07 + .007 2.0 2.0 10,000 1500 375 .03 √-f(GHz) 1000 -(90-fGHz)
Attachment RG 174, 188, 316 Note 1 1.15 + .01 2.0 2.0 10,000 750 190 .06 √-f(GHz) 500 -(60-fGHz)
RG 55, 58, 141, 142, Note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .06 √-f(GHz) 670 -(60-fGHz)
223, 303, 400
Straight Cable Plugs RG 405 (2.16 [.085]) 12.4 1.10 + .015 2.0 2.0 10,000 1000 250 .03 √-f(GHz) 670 -(90-fGHz)
& Jacks Solder
Clamp Attachment RG 402 (3.58 [.141]) 12.4 1.07 + .01 2.0 2.0 10,000 1500 375 .03 √-f(GHz) 1000 -(90-fGHz)
RG 55, 58, 141, 142 Note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .06 √-f(GHz) 670 -(60-fGHz)
Straight Cable Plugs 223, 400
&Jacks Clamp RG 174, 188, 316 Note 1 1.15 + .01 2.0 2.0 10,000 750 190 .06 √-f(GHz) 500 -(60-fGHz)
Attachment RG 180, 195 Note 1 — 2.0 2.0 10,000 750 190 — 500 -(60-fGHz)
RG 55, 142, 223, 400 Note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .06 √-f(GHz) 670 -(60-fGHz)
Straight Cable Plugs RG 58, 141, 303 Note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .06 √-f(GHz) 670 -(60-fGHz)
& Jacks Crimp RG 174, 188, 316 Note 1 1.15 + .01 2.0 2.0 10,000 750 190 .06 √-f(GHz) 500 -(60-fGHz)
Attachment RG 180, 195 Note 1 — 2.0 2.0 10,000 750 190 — 500 -(60-fGHz)
RG 178, 196 Note 1 1.2 + .02 2.0 2.0 10,000 500 125 .06 √-f(GHz) 335 -(60-fGHz)
Straight Cable Plugs RG 401 (6.35 [.250]) 18.0 1.07 + .01 2.0 2.0 10,000 1500 375 .05 √-f(GHz) 1000 -70 dB min.
& Jacks Compression 6.35 [.250] Microporous 18.0 1.07 + .01 2.0 2.0 10,000 1500 375 .05 √-f(GHz) 1000 -70 dB min.
Clamp Attachment 6.35 [.250] 3 Spline 18.0 1.07 + .01 2.0 2.0 10,000 1500 375 .05 √-f(GHz) 1000 -70 dB min.
6.35 [.250] 5 Spline 18.0 1.07 + .01 2.0 2.0 10,000 1500 375 .05 √-f(GHz) 1000 -70 dB min.
RG 405 (2.16 [.085]) 12.4 1.18 + .015 2.0 2.0 10,000 1000 250 .04 √-f(GHz) 670 -(90-fGHz)
RG 405 (2.16 [.085]) 18.0 1.18 + .015 2.0 2.0 10,000 1000 250 .04 √-f(GHz) 670 -(90-fGHz)
Right-Angle Cable RG 402 (3.58 [.141]) 12.4 1.15 + .015 2.0 2.0 10,000 1500 325 .04 √-f(GHz) 1000 -(90-fGHz)
Plugs Solder RG 402 (3.58 [.141]) 18.0 1.10 + .010 2.0 2.0 10,000 1500 250 .05 √-f(GHz) 1000 -(90-fGHz)
Attachment RG 55, 58, 141, 142, Note 1 1.15 + .01 2.0 2.0 10,000 1000 250 .07 √-f(GHz) 670 -(60-fGHz)
223, 303, 400
RG 174, 188, 316 Note 1 1.15 + .02 2.0 2.0 10,000 750 190 .07 √-f(GHz) 500 -(60-fGHz)
RG 55, 142, 223, 400 Note 1 1.15 + .02 2.0 2.0 10,000 1000 250 .07 √-f(GHz) 670 -(60-fGHz)
Right-Angle Cable RG 58, 141, 303 Note 1 1.15 + .02 2.0 2.0 10,000 1000 250 .07 √-f(GHz) 670 -(60-fGHz)
Plugs Crimp RG 174, 188, 316 Note 1 1.18 + .02 2.0 2.0 10,000 750 190 .07 √-f(GHz) 500 -(60-fGHz)
Attachment RG 180, 195 Note 1 — 2.0 2.0 10,000 750 190 — 500 -(60-fGHz)
RG 178, 196 Note 1 1.25 + .025 2.0 2.0 10,000 500 125 .07 √-f(GHz) 335 -(60-fGHz)
RG 55, 58, 141, 142, Note 1 1.10 + .005 2.0 2.0 10,000 1000 250 .08 √-f(GHz) 670 -(60-fGHz)
Right-Angle Cable 223, 303
Plugs Clamp RG 174, 188, 316 Note 1 1.15 + .01 2.0 2.0 10,000 750 190 .08 √-f(GHz) 500 -(60-fGHz)
Attachment RG 180, 195 Note 1 — 2.0 2.0 10,000 750 190 — 500 -(60-fGHz)
Non-Captured 18.0 1.03 + .004 2.0 2.0 10,000 1000 250 .03 √-f(GHz) 670 -(100-fGHz)
Flange Mount Plugs Epoxy Captured 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 .03 √-f(GHz) 670 -(60-fGHz)
& Jacks Panel or Mechanical Capture 18.0 1.04 + .004 2.0 2.0 10,000 1000 250 .03 √-f(GHz) 670 -(100-fGHz)
Bulkhead Mount Field Replaceable 18.0 1.04 + .006 2.0 2.0 10,000 1000 250 .04 √-f(GHz) 670 -(100-fGHz)
Hermetic Launchers
Bulkhead Epoxy Captured 18.0 1.07 + .010 2.0 2.0 10,000 1000 250 .04 √-f(GHz) 670 -(60-fGHz)
Feedthrough Jacks Mechanical Capture 18.0 1.07 + .010 2.0 2.0 10,000 1000 250 .04 √-f(GHz) 670 -(100-fGHz)
Right-Angle Flange N/A 18.0 1.07 + .015 2.0 2.0 10,000 1000 250 .08 √-f(GHz) 670 -(90-fGHz)
Mount Jacks N/A 12.4 1.15 + .015 2.0 2.0 10,000 1000 250 .08 √-f(GHz) 670 -(90-fGHz)
Printed Circuit Board N/A 18.0 N/A 2.0 2.0 10,000 1000 250 N/A 670 N/A
Mount Straight Terminal
Right-Angle N/A 12.4 N/A 2.0 2.0 10,000 1000 250 N/A 670 N/A
Printed Circuit
End Launch N/A 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 .03 √-f(GHz) 670 -(60-fGHz)
Stripline Circuit
Surface Launch N/A 18.0 1.05 + .005 2.0 2.0 10,000 1000 250 .03 √-f(GHz) 670 -(60-fGHz)
Stripline Circuit
Right-Angle Surface N/A 12.4 1.15 + .015 2.0 2.0 10,000 1000 250 .08 √-f(GHz) 670 -(60-fGHz)
Launch Stripline Circuit N/A 18.0 1.07 + .015 2.0 2.0 10,000 1000 250 .08 √-f(GHz) 670 -(60-fGHz)
1. Maximum operating frequency of cable per MIL-C-17.
2. Specifications do not apply to hermetic or compression crimp connectors.
3. For Brass SMA: Frequency Range DC-6GHz, Impedance 50 Ohms, Insulation Resistance.
SMA Connectors (Continued)
Interface Mating
Dimensions
F
DG
Dia.
J
Dia.
B Dia.
Ref. Plane Note 2
A
Dia. B Dia.
A
Dia.
H
Dia.
D
E
C
Ref. Plane Note 2
C
D
H
E
GF
K
.250-36
UNS-2B Thd.
.250-36
UNS-2A Thd.
G
Dia.
H
Dia.
Plug B
Plug A
Plug
Dimension Minimum Maximum
A6.35 —
.250
B—
4.59
.1808
C—
3.43
.135
D0.00 0.25
.000 .010
E—
2.54
.100
F0.00 0.25
.000 .010
G0.90 0.94
.0355 .037
H0.00 0.38
.000 .015
Jack
Dimension Minimum Maximum
A5.28 5.49
.208 .216
B4.60 —
.181
C1.91 1.98
.075 .078
D0.00 0.25
.000 .010
E0.38 1.43
.015 .045
F2.92 —
.115
G0.00 0.25
.000 .010
H4.32 —
.170
J.124 1.30
.049 .051
K5.54 —
.218
Notes:
1. ID to meet VSWR and contact resistance when mated with 0.51 +.025/-.013 [.036 +.0010/-.0005] Dia. Pin.
2. When fully engaged, the two reference planes must coincide with metal to metal contact.
3. Metric equivalents (to the nearest 0.01mm) are given for general information only.
103
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
104
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable
Straight Cable Plug, Solder
Heat Shrink
Tubing
7.9
[.312] Hex.
Ref. Plane
A
16.7
[.658] Ref.
30.2
[1.187] Ref.
Cable Type Body Material Contact Contact Dimension Instruction Part
RG/U & Finish Captivation Attachment A Sheet No.
55, 58, 141, 142, Stainless, Gold1No Solder 19.7 408-4821 1051638-1
223, 303, 400 .775
174, 188, 316 Stainless, Gold1No Solder 17.5 408-4756 1051644-1
.690
1Coupling nut is passivated stainless steel.
Straight Cable Jack, Solder
.250-36 UNS-2A Heat Shrink
Tubing
Ref. Plane 16.6
[.654] Ref.
A
6.4
[.250]
Hex.
25.6
[1.007] Ref.
Cable Type Body Material Contact Contact Dimension Instruction Part
RG/U & Finish Captivation Attachment A Sheet No.
55, 58, 141, 142, Stainless, Gold No Solder 18.5 408-4820 1051852-1
223, 303, 400 .730
Bulkhead Cable Jack, Solder
Ref. Plane
.250-36 UNS-2A 7.9
[.312]Hex.
3.2
[.125]
Max.
Panel
9.50
[.374]
Ref.
A
31.10
[1.225] Ref.
11.4
[.450]
Recommended
Mounting Hole
Ø 6.4
[.250] Min.
6.0
[.235] Min.
Shrink Tubing
Cable Type Body Material Contact Contact Dimension Instruction Part
RG/U & Finish Captivation Attachment A Sheet No.
RG 55, 58, Stainless, Gold No Solder 24.0 408-4817 1051861-1
141, 142, 300 .945
174, 188, 316 Stainless, Gold No Solder 21.0 408-4817 1051942-1
.825
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
SMA Connectors (Continued)
Flexible Cable (Continued)
Right-Angle Cable Plug,
Solder
Ref. Plane
7.9
[.312] Hex.
Heat Shrink
Tubing
16.9
[.666] Ref.
13.5
[.530] Ref.
10.5
[.413]
Ref.
A
Ref.
25.9
[1.020]
Cable Type Body Material Contact Contact Dimension Instruction Part
RG/U & Finish Captivation Attachment A Sheet No.
55, 58, 141, 142, Stainless, Gold1Yes Solder 16.0 408-4816 1052063-1
223, 303, 400 .630
174, 188, 316 Stainless, Gold1Yes Solder 11.2 408-4815 1052067-1
.440
1Coupling nut is passivated stainless steel.
Straight Cable Plug, Clamp
Cable Type Body Material Contact Contact Dimension Instruction Part
RG/U & Finish Captivation Attachment A Sheet No.
174, 188, 316 Stainless, Pass. Yes Solder 2.9 408-4906 1050721-1
.116
19.0
[.750] A
Ref.
7.9
[.312] Hex
Straight Cable Jack, Clamp
Cable Type Body Material Contact Contact Dimension Instruction Part
RG/U & Finish Captivation Attachment A Sheet No.
174, 188, 316 Stainless, Pass. Yes Solder 2.9 408-4906 1050903-1
.116
17.8
[.700] A
Ref.
7.9
[.312] Hex
105
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
106
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable (Continued)
Bulkhead Feedthrough
Cable Jack, Clamp
Cable Type Body Material Contact Contact Instruction Part
RG/U & Finish Captivation Attachment Sheet No.
174, 188, 316 Stainless, Pass. Yes Solder 408-4704 1050996-1
Ref.
Plane
.250-36, UNS-2A Recommended
Mounting Hole
7.9
[.312]Hex.
3.2
[.125]
Max.
Panel
Ø 6.4
[.250] Min.
6.0
[.235]Min.
9.5
[.374]
Ref.
22.6
[.890] Max.
11.4
[.450]
Right-Angle Cable Plug,
Clamp
Cable Type Body Material Contact Contact Instruction Part
RG/U & Finish Captivation Attachment Sheet No.
174, 188, 316 Stainless, Pass. Mechanical Solder 408-4965 1051140-1
14.3
[.562] Max.
18.0
[.710] Max.
7.9
[.312] Hex.
Ref. Plane
16.9
[.665] Ref.
12.9
[.509] Ref.
10.0
[.392] Ref.
Straight Cable Plug, Crimp
25.4
[1.00] Ref.
22.4
[.883] Ref.
7.9
[.312] Hex.
Ref. Plane
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet No.
Part No.
174, 179, 187, Stainless, Pass. Mechanical Solder/Crimp21055236-1 408-4661 1056443-1
188, 316
RD316 Stainless, Pass. Mechanical Solder/Crimp21055236-11408-4661 1056436-1
55, 142, 223, 400 Stainless, Pass. Mechanical Solder/Crimp21055236-1 408-4661 1056438-1
174, 179, 187, Brass, Mechanical Solder/Crimp21055236-1 408-4661 1082034-1
188, 316 White Bronze
1Use die 1055270-1 to crimp RD316 ferrule.
2Use die 1055880-1 to crimp center contact.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SMA Connectors (Continued)
Flexible Cable (Continued)
Straight Cable Jack, Crimp
27.43
[1.080] Max.
6.35
[.250] Hex.
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet Style No.
Part No.
174, 316 Brass, Nickel Mechanical Solder 1408-4032 A 5447648-3
58, 141, 303 Stainless, Pass. Mechanical Solder 1055236-1 408-4704 B 1051867-1
174, 188, 316 Stainless, Pass. Mechanical Solder 1055236-1 408-4708 B 1051855-1
178, 196 Stainless, Pass. Mechanical Solder 1055236-1 408-4806 B 1051869-1
1Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule
crimp.
Bulkhead Feedthrough
Cable Jack, Crimp
26.4
[1.040]
6.4
[.250]
6.0
[.235]
Ref.
11.4
[.450]
Dia.
Min.
3.2
[.125]
Max.
Panel
Min. 7.9
[.312] Hex
.250-36 UNS-2A
Lock Washer
Recommended
Mounting Hole
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet No.
Part No.
174, 179, 187, Stainless, Pass. Mechanical Solder/Crimp21055236-1 408-4661 1056452-1
188, 316
RD316 Stainless, Pass. Mechanical Solder/Crimp21055236-13408-4661 1056445-1
58, 141, 303 Stainless, Pass. Mechanical Solder/Crimp21055236-1 408-4661 1056450-1
55, 142, Stainless, Pass. Mechanical Solder/Crimp21055236-1 408-4661 1056447-1
223, 400
174, 188, 316 Brass, Nickel Mechanical Crimp 1408-4032 5448103-2
1Refer to Tyco Electronics Customer Print for tooling requirement. DANIELS Mil Tooling used for contact and ferrule
crimp.
2Use die 1055880-1 to crimp center contact.
3Use die 1055270-1 to crimp RD316 ferrule.
Style A
.250-36 UNS-2A Heat Shrink
Tubing
Ref. Plane 19.3
[.761] Ref.
Hex.
21.3
[.837] Ref.
6.4
[.250]
Hex.
7.9
[.312]
33.1
[1.304] Ref.
Style B
107
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
108
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Flexible Cable (Continued)
Right-Angle Cable Plug,
Crimp
20.4
[.802]
Ref.
10.5
[.413]
Ref.
13.5
[.530] Ref.
16.9
[.665] Ref.
17.2
[.677]
Ref.
Ref. Plane
7.9
[.312] Hex.
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet No.
Part No.
174, 179, 187, Stainless, Pass. Mechanical Solder 1055236-1 408-4659 1056462-1
188, 316
58, 141, 303 Stainless, Pass. Mechanical Solder 1055236-1 408-4659 1056456-1
Right-Angle Cable Plug,
Crimp
12.1
[.475]
Ref.
27.0
[1.062]
16.9
[.665]
Ref.
7.9
[.312] Hex
Ref.
Ref.
13.4
[.530]
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet No.
Part No.
55, 142, Stainless, Pass. Epoxy Solder 1055236-1 408-4681 1052072-1
223, 400
174, 188, 316 Stainless, Pass. Epoxy Solder 1055236-1 408-4683 1052076-1
178, 196 Stainless, Pass. Epoxy Solder 1055236-1 408-4801 1052098-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SMA Connectors (Continued)
Flexible Cable (Continued)
Straight Push-On
20.65
[.813]
Ref.
27.97
[1.101] Ref.
6.35
[.250]
Plug Sleeve
Clearance Area
Min.
17.32
[.682] Ref.
14.15
[.557] Ref.
Ref. Plane
5.49
[.216] Max.
Ø 12.70
[.500]
5.08 ± 0.13
[.200 ± .005]
Thread Length
27.61
[1.087]
Ref.
31.50
[1.240] Ref.
6.35
[.250]
Plug Sleeve
Clearance Area
Min.
Ref. Plane
5.49
[.216] Max.
Ø 12.70
[.500]
5.08 ± 0.13
[.200 ± .005]
Thread Length
Right-Angle Push-On
109
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Cable Type Body Material Contact Contact Part
RG/U & Finish Captivation Attachment No.
316 Beryllium Copper, Gold Mechanical Solder/Crimp 1274694-1
Cable Type Body Material Contact Contact Part
RG/U & Finish Captivation Attachment No.
316 Beryllium Copper, Gold Mechanical Crimp 1408541-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
110
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Direct Solder Attachment, Semi-Rigid Cable
Straight Cable Plug
8.40
[.330]
5.4
[.213]Ref. Ø 3.66
[.144]
Cable Type Body Material Contact Contact Solder Instruction Part
RG/U & Finish Captivation Attachment Assembly Kit Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Pass. No Center No Center 1055420-1 408-4761 1050757-1
Contact Contact
Straight Cable Plug
8.1
[.320] Ref.
11.2
[.440]
Ref.
Ø 4.6
[.180]
Ø 3.67 [.144] RG402/U
Ø 2.26 [.089] RG405/U
Cable Type Body Material Contact Contact Solder Instruction Part
RG/U & Finish Captivation Attachment Assembly Kit Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Gold1No Solder 1055420-1 408-4764 1050525-1
405 (2.16 [.085]) Stainless, Gold1No Solder 1055420-1 408-4765 1050770-1
402 (3.58 [.141]) Stainless, Gold1No Center No Center N/A — 1050542-1
Contact Contact
405 (2.16 [.085]) Stainless, Gold1No Solder 1055420-1 — 1050548-1
1Coupling nut is passivated stainless steel.
Straight Cable Jack
12.7
[.500] Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
10.8
[.424] Ref.
Cable Type Body Material Contact Contact Solder Instruction Part
RG/U & Finish Captivation Attachment Assembly Kit Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Gold No Solder 1055420-1 408-4767 1050854-1
405 (2.16 [.085]) Stainless, Gold No Solder 1055420-1 408-4833 1050859-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SMA Connectors (Continued)
Direct Solder Attachment, Semi-Rigid Cable (Continued)
Bulkhead Cable Jack
Recommended
Mounting Hole
8.6
[.339]
Ref. 6.0
[.235]
10.5
[.415]
12.7
[.500]
19.0
[.748]
2.4
[.093]
Ø 4.6
[.180]
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
Max
Panel
Min.
Ø 6.4
[.250]Min.
Cable Type Body Material Contact Contact Solder Instruction Part
RG/U & Finish Captivation Attachment Assembly Kit Sheet No.
Part No.
402 (3.58 [.141]) Brass, Gold No Solder 1055420-1 408-4768 1082029-1
2 Hole Flange Mount
Cable Jack
Ø 15.9
[.625]
Ø 2.6
[.102]
12.2
[.481]
5.7
[.223]
14.2
[.560]
9.5
[.375]
1.7
[.065]
7.6
[.299]
.250-36 UNS-2A
2 Plcs.
Ref.
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
Cable Type Body Material Contact Contact Solder Instruction Part
RG/U & Finish Captivation Attachment Assembly Kit Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Gold No Solder 1055420-1 408-4767 1051052-1
405 (2.16 [.085]) Stainless, Gold No Solder 1055420-1 408-4883 1051046-1
4 Hole Flange Mount
Cable Jack
14.2
[.560]
7.6
[.299]
9.5
[.375]
8.6
[.340]
Ø 2.6
[.102]
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
12.7
[.500]
4 Plcs.
2 Plcs.
Sq.
Ref.
Cable Type Body Material Contact Contact Solder Instruction Part
RG/U & Finish Captivation Attachment Assembly Kit Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Gold No Solder 1055420-1 408-4767 1051081-1
405 (2.16 [.085]) Stainless, Gold No Solder 1055420-1 408-4883 1051085-1
111
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
112
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Semi-Rigid Cable
Right-Angle Cable Plug,
Direct Solder Attachment
7.9
[.312] Hex.
Ref. Plane
17.1
[.675] Ref.
7.9
[.312] Ref.
13.6
[.535] Ref.
10.5
[.413]
Ref.
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
Cable Type Body Material Contact Contact Solder Instruction Part
RG/U & Finish Captivation Attachment Assembly Kit Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Gold1Epoxy Solder 1055420-1 408-4831 1051151-1
405 (2.16 [.085]) Stainless, Gold1Epoxy Solder 1055420-1 408-4831 1051157-1
405 (2.16 [.085]) Brass, Gold Mechanical Solder 1055420-1 408-4831 1088312-1
1Coupling nut is passivated stainless steel.
Straight Cable Plug, Crimp
9.8
[.387] Ref.
6.9 [.270] RG402/U
7.1 [.278] RG405/U
Ø 3.63 [.143] RG402/U
Ø 2.26 [.089] RG405/U
Ref
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet No.
Part No.
405 (2.16 [.085]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4695 1050598-1
402 (3.58 [.141]) Stainless, Pass. No Center
Contact Solderless 1055835-1 408-4690 1050740-1
Straight Cable Plug —
Low Profile, Crimp
5.8
[.229]Ref.
8.6
[.337]Ref.
Ø 3.66 [.144] RG402/U
Ø 2.26 [.089] RG405/U
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4696 1050602-1
405 (2.16 [.085]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4697 1050611-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SMA Connectors (Continued)
Semi-Rigid Cable (Continued)
2 Hole Flange, Crimp
16.70
[.657] Max.
6.30
[.250]
6.00
[.235]
Dia.
Min.
OSM Jack
After Crimping
14.50
[.569] Ref.
8.60
[.339] Ref.
7.90
[.312] Hex. 11.10
[.437] Hex.
Ref. Plane
After Crimping
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4954 1051005-1
405 (2.16 [.085]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4689 1051007-1
Right-Angle Cable Plug,
Crimp
Ø 3.63 [.143] RG402/U
Ø 2.26 [.089] RG405/U
7.9
[.312] Hex.
Ref. Plane
15.8
[.622] Ref.
12.6
[.497] Ref.
9.7
[.383]
Ref.
14.43
[.568] After Crimping
11.25
[.443] Ref. After Crimping
Cable Type Body Material Contact Contact Crimp Instruction Part
RG/U & Finish Captivation Attachment Tooling Sheet No.
Part No.
402 (3.58 [.141]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4691 1051145-1
405 (2.16 [.085]) Stainless, Pass. Mechanical Solderless 1055835-1 408-4692 1051147-1
113
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
2 Hole Flange Mount Jack
Receptacle
14.6
[.575]
9.5
[.375]
1.7
[.065]
5.7
[.223]
12.2
[.481]
Typ.
1.3
[.050]
0.8
[.031]
Dia.
Min.
Dia.
2.6
[.102]
Dia.
2 Plcs.
15.9
[.625]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052544-1
2 Hole Flange Mount Jack
Receptacle
.250-36 UNS-2A
Ref. Plane 7.6
[.299]
Ref.
1.7
[.065]
9.5
[.375]
14.6
[.575] 0.8
[.030]
5.7
[.223]
12.2
[.481]
Ø 4.1
[.162]
Ø 15.9
[.625]
Ø 1.3
[.050]
Ø 0.8
[.031]
Ø 2.6
[.102] 2 Plcs.
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052534-1
114
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount, Solder Pot Terminal
4 Hole Flange Mount Plug
Receptacle
12.7
[.500] Sq.
18.0
[.707] Ref.
12.9
[.507] 1.7
[.065]
Ref. 8.6
[.340] Typ.
1.3
[.050] Dia.
7.9
[.312] Hex
6.4
[.250]
Dia.
Min.
2.6
[.102]
Dia.
4 Plcs.
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy N/A -65 to 125° C 1052324-1
4 Hole Flange Mount Jack
Receptacle
.250-36UNS-2A
4 Plcs.
Ref. Plane
14.6
[.575]
Ø 2.6
[.102]
12.7
[.500] Sq.
8.6
[.340] Typ.
Ø 1.3
[.050]
Ø 0.9
[.035]
7.6
[.299]
9.5
[.375] 1.7
[.065]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052422-1
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
SMA Connectors (Continued)
Panel Mount
Bulkhead Feedthrough Jack
Receptacle, Solder Pot Terminal
6.0
[.235]
6.4
[.250]
17.0
[.668]
12.7
[.500] 1.6
[.062]
1.3
[.050]
4.1
[.162]
7.9
[.312]
Recommended
Mounting Hole
Min.
Min.
Dia.
Hex.
Dia.
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy N/A -65 to 125° C 1053092-1
Press-In Cable,
Jack Panel
Recommended
Mounting Hole
+ 0.03
– 0.01
+ .0010
– .0004
Ø 7.00
[.276 ]
Ø 13.00 ± 0.10
[.512 ± .004]
9.60 ± 0.10
[.378 ± .004]
1/4" - 36 UNS-2A
+ 0.05
– 0.03
+ .002
– .001
Ø 7.40
[.291 ]
4.00 ± 0.10
[.157 ± .004]
11.00 ± 0.10
[.433 ± .004]
1.50 ± 0.10
[.059 ± .004]
22.40
[.882]
115
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Cable Type Body Material Contact Temperature
RG/U & Finish Captivation Range Part No.
316 D Brass, Gold Mechanical –65 to 125° C 619115-1
Press-In Jacks,
Straight Terminal
Ø 8.50 ± 0.60
[.335 ± .024]
10.10 ± 0.10
[.398 ± .004]
6.10 ± 0.10
[.240 ± .004]
2.50 ± 0.20
[.098 ± .008]
Ø 5.50
[.217] Ref.
+ 0.03
– 0.07
+ .001
– .003
Ø 0.50
[.020 ]
8.90 ± 0.20
[.350 ± .008]
Part Number 1460468
1.10 ± 0.10
[.043 ± .004]
4.50 ± 0.10
[.177 ± .004]
+ 0.00
– 0.10
+ .000
– .004
Ø 1.00
[.039 ]
+ 0.10
– 0.20
+ .004
– .008
Ø 8.00
[.315
]
+ 0.40
– 0.20
+ .016
– .008
3.50
[.138 ]
+ 0.02
– 0.03
+ .0008
– .0012
5.05
[.199 ]
14.10 ± 0.20
[.555 ± .008]
2.00 ± 0.10
[.079 ± .004]
5.00 ± 0.10
[.197 ± .004]
Part Number 1460469
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Brass, White Bronze Mechanical N/A –65 to 125° C 1460468-1
Brass, Gold Mechanical N/A –65 to 125° C 1460469-1
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
116
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount, Straight Terminal
4 Hole Flange Mount Jack
Receptacle
.250-36 UNS-2A
9.5
[.375]
Ref. Plane 7.6
[.299] Ref.
1.7
[.065]
14.99
[.590 ]
± 0.25
± 0
27.43
[1.080 ]
± 0.25
± 0
Ø 1.3
[.050]
Ø 4.1
[.162] Ø 2.6
[.102]
12.7
[.500]Sq.
8.6
[.340] Typ.
4 Plcs.
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated None -(100-fGHz) -65 to 165° C 1052518-1
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052523-1
Stainless, Gold Epoxy -(60-fGHz) -65 to 125° C 1052522-1
2 Hole Flange Mount Plug
Receptacle
1.3
[.050]
4.1
[.162]
Dia.
7.9
[.312] Hex 2.6
[.102]
15.9
[.625]
12.2
[.481]
Dia.
2 Plcs.
Ref.
25.3
[.995]
6.6
[.260]
Ref.
12.9
[.507]
1.7
[.065]
8.4
[.330]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052349-1
2 Hole Flange Mount Jack
Receptacle
5.7
[.223]
12.2
[.481]
Ø 15.9
[.625]
Ø 2.6
[.102] 2 Plcs.
.250-36 UNS-2A
Ref. Plane
9.5
[.375]
7.6
[.299] Ref.
1.7
[.065]
14.99
[.590 ]
± 0.25
± 0
27.43
[1.080 ]
± 0.25
± 0
Ø 1.3
[.050]
Ø 4.1
[.162]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052552-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
117
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount, Straight Terminal (Continued)
Bulkhead Feedthrough Jack
Receptacle
.250-36 UNS-2A
Lockwasher
Ref. Plane 10.82
[.426]
Ref.
7.9
[.312]
Hex.
Ø 4.1
[.162]
Ø 1.3
[.050]
12.7
[.500] 4.1
[.160]
1.9
[.076]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1053222-1
2 Hole Flange Mount
Right-Angle Jack
Receptacle
11.6
[.458]
1.7
[.065]
4.1
[.162]
1.3
[.050]
Ø 15.9
[.625]
12.2
[.481]
5.7
[.223]
Ø 2.6
[.102] 2 Plcs.
15.0 ± 0.25
[.590 ± .010]
11.1 ± 0.13
[.437 ± .001]
7.9 ± 0.25
[.312 ± .010]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Mechanical -(90-fGHz) -65 to 165° C 1052986-1
4 Hole Flange Mount
Right-Angle Jack
Receptacle
8.6
[.340]
12.7
[.500]
Sq.
Ø 2.6
[.102] 4 Plcs.
Typ.
Ø 4.1
[.162]
Ø 1.3
[.050]
.250-36 UNS-2A
Ref. Plane
11.6
[.458]
9.7
[.382] Ref.
1.7
[.065]
9.65 ± 0.25
[.380 ± .010]
12.83 ± 0.25
[.505 ± .010]
17.91 ± 0.25
[.705 ± .010]
14.99 ± 0.25
[.590 ± .010]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Mechanical -(90-fGHz) -65 to 165° C 1052978-1
Stainless, Passivated Mechanical -(90-fGHz) -65 to 165° C 1052982-1
Note: Part Numbers are RoHS compliant except:lIndicates non-RoHS compliant.
118
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Panel Mount
4 Hole Flange Mount Jack
Receptacle, Straight
Terminal
Slot Width
Ref. Plane
4 Plcs.
.250-36 UNS-2A
Ø 1.3
[.050]
12.7
[.500]Sq.
8.6
[.340]Typ.
Ø 2.6
[.102]
1.3
[.050]
1.7
[.065]
9.5
[.375]
7.6
[.299]Ref.
Body Material Contact Slot Width RF Leakage Temperature Part
& Finish Captivation +.076/-.025 db min. Range No.
[+.003/-.001]
Stainless, Passivated Epoxy 0.5 [.018] -(60-fGHz) -65 to 125° C 1052563-1
4 Hole Flange Mount Plug
Receptacle, Tab Terminal
1.7
[.065]
4 Plcs.
Ø 2.6
[.102]
2.5
[.100]
8.6
[.340]
12.7
[.500]Sq.
12.9
[.507]Ref.
9.9
[.390]Ref.
0.1
[.005]
X
Thk.
1.2
[.050] Wide
Tab
Typ.
Body Material Contact Tab RF Leakage Temperature Part
& Finish Captivation Width db min. Range No.
Stainless, Passivated Epoxy 1.3 [.050] -(60-fGHz) -65 to 125° C 1052360-1
4 Hole Flange Mount Jack
Receptacle, Tab Terminal
9.5
[.375]
2.5
[.100]
7.6
[.299]
1.7
[.065]
12.7
[.500] 8.6
[.340]
Ø 2.6
[.102]
Sq.
0.13
[.005]
X
Thk.
0.5
[.020] Wide
Tab
4 Plcs.
2 Plcs.
Ref.
Body Material Contact Tab RF Leakage Temperature Part
& Finish Captivation Width db min. Range No.
Stainless, Passivated Epoxy .51 [.020] -(60-fGHz) -65 to 125° C 1052898-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
119
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
2 Hole Flange Mount Jack
Receptacle, Panel Mount,
Tab Terminal
.250-36UNS-2A
Ref. Plane
0.13
[.005]
X
Thk.
1.27
[.050] Wide
Tab
7.59
[.299]Ref.
1.7
[.065]
9.5
[.375] 2.5
[.100]
2 Plcs.
Ø 2.6
[.102]
Ø 15.9
[.625]
5.7
[.223]
12.2
[.481]
Body Material Contact Horizontal RF Leakage Temperature Part
& Finish Captivation Tab db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052577-1
4 Hole Flange Mount Jack
Receptacle, for Microstrip
Transmission Line Circuits
12.7
[.500]Sq.
8.6
[.340]Typ.
.250-36 UNS-2A
Ref. Plane 7.59
[.299]
Ref.
1.7
[.065] 0.3
[.010]
2.2
[.085]
3.2
[.125]
4.4
[.175]
9.5
[.375]
Ø 2.6
[.102] 4 Plcs.
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052528-1
2 Hole Flange Mount Jack
Receptacle, for Microstrip
Transmission Line Circuits
5.7
[.223]
12.2
[.481]
Ø 15.9
[.625]
Ø 2.6
[.102] 2 Plcs.
.250-36 UNS-2A
Ref. Plane
9.5
[.375] 3.2
[.125]
1.2
[.049]
7.6
[.299]Ref.
1.7
[.065]
Ø 2.2
[.085]
Ø 0.3
[.010]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Stainless, Passivated Epoxy -(60-fGHz) -65 to 125° C 1052902-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
120
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
Field Replaceable Hermetic Launchers (Continued)
4 Hole Flange Mount Jack
Receptacle with EMI/RFI
Gasket
Accepts Pin Dia. AEMI Gasket
.250-36UNS-2A
Ref. Plane 4 Plcs.
Ø 2.6
[.102]
9.5
[.375]
1.7
[.065]
0.1
[.005]Ref.
8.6
[.340] 2 Plcs.
7.6
[.299] Ref.
12.7
[.500]Ref.
Material & Finish Captivation Pin Diameter A Part No.
Stainless, Passivated Mechanical .38 [.015] 1052684-1
4 Hole Flange Mount Jack
Receptacle without EMI/RFI
Gasket
12.7
[.500]
8.6
[.340]
Ø 2.6
[.102] 4 Plcs.
2 Plcs.
Accepts
Pin Dia. A
9.5
[.375]
7.6
[.299] Ref.
Sq.
1.7
[.065]
Material & Finish Captivation Pin Diameter A Part No.
Stainless, Passivated Mechanical .91 [.036] 1052643-1
2 Hole Flange Mount Jack
Receptacle with EMI/RFI
Gasket
5.6
[.222]
12.2
[.481]
Ø 15.9
[.625]
Ø 2.6
[.102] 2 Plcs.
.250-36 UNS-2A
EMI
Gasket
Accepts
Pin Dia. A
Ref. Plane
9.5
[.375]
7.6
[.299] Ref.
0.1
[.005] Min.
1.7
[.065]
Material & Finish Captivation Pin Diameter A Part No.
Stainless, Passivated Mechanical .30 [.012] 1052628-1
Stainless, Passivated Mechanical .38 [.015] 1052689-1
Stainless, Passivated Mechanical .46 [.018] 1052634-1
2 Hole Flange Mount Jack
Receptacle without EMI/RFI
Gasket, Field Replaceable
Hermetic Launchers
9.5
[.375]
7.6
[.299]
2 Plcs.
Accepts Pin Dia A
1.7
[.065]
5.7
[.223]
12.2
[.481]
Ø 15.9
[.625]
Ø 2.6
[.102]
Material & Finish Captivation Pin Diameter A Part No.
Stainless, Passivated Mechanical .51 [.020] 1052652-1
Stainless, Passivated Mechanical .91 [.036] 1052646-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
121
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
PC Board Mount
Right-Angle Jack
Ref. Plane
11.6
[.458] 5.1
[.200] Typ.
2.8
[.110]
Typ.
9.7
[.382]
Ref.
0.5
[.020]
Typ.
6.4
[.250] Sq.
1.0
[.040]
Sq.
4 Plcs.
6.35
[.250 ]
± 0.25
± 0
13.5
[.530]
3.9
[.155] Ref.
Ø 1.3
[.050]
15.24
[.600] Max.
4.60
[.181]
Min.
Dia.
Max.
9.65
[.380]
3.94
[.155]
11.68
[.460]
1.93 ± .05
[.076 ± .002]
1.27 ± .03
[.050 ± .001]
6.35
[.250]
Dia.
1.02 ± .05
[.040 ± .002]Typ.
PC Board Mount
Vertical Jack
Ø 1.3
[.050]
.250-36 UNS-2A
Ref. Plane
3.9
[.155]
13.5
[.530] 9.5
[.375] Ref.
5.1
[.200] Typ.
7.6
[.299]
Ref.
6.3
[.250] Sq.
1.0
[.040]
Sq.
4 Plcs.
6.35 ± 0.13
[.250 ± .005]
6.35 ± 0.13
[.250 ± .005]
1.27 ± 0.03
[.050 ± .001]
9.53 ± 0.13
[.375 ± .005]
19.94
[.785] 12.70
[.500]
12.70
[.500]
5.28
[.203]
Ø 0.63
[.025] 3 Plcs.
Material & Finish Style No. Part No.
Stainless, Gold 1 1053354-1
Brass, Gold 2 221789-1
Brass, Gold 2 221789-3
Brass, Nickel Plate 3 6274096-1
Material & Finish Style No. Part No.
Stainless, Gold 1 1053378-1
Stainless, Gold 2 221790-1
Style 1
5.1
[.200] 2 Plcs.
Ø 1.7
[.067]5 Plcs.
Recommended
Mounting Holes
Style 2 Style 3
5.1
[.200] 2 Plcs.
Ø 1.7
[.067]5 Plcs.
Recommended
Mounting Holes
Style 1
Style 2
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
122
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
In-Series Adapter,
Jack to Jack
Ref. Plane Ref. Plane
3.2
[.125]
12.7
[.500]
8.8
[.348]
Ref. 5.5
[.218] Across Flats
Frequency Material & Finish Captivation Part No.
DC-18.0GHz Stainless, Gold Epoxy* 1053488-1
Frequency Material & Finish Captivation Part No.
DC-18.0GHz Stainless, Passivated Epoxy* 1053635-1
*All adapters listed above employ epoxy captivation. Mechanically captivated
versions are also available. Please consult Tyco Electronics.
In-Series Adapter,
Plug to Plug
5.5
[.218] Across Flats
7.9
[.312] Hex
Ref.
22.2
[.875]
3.2
[.125]
In-Series Adapter,
Jack to Plug, Right-Angle
14.8
[.583]
7.9
[.312]
Hex
15.9
[.625] Ref.
12.7
[.500]
11.6
[.458]
Frequency Material & Finish Captivation Part No.
DC-12.4GHz Stainless, Passivated Mechanical 1055065-1
In-Series Adapter,
Jack to Jack, Right-Angle
Ref. Plane
Ref. Plane
9.7
[.383]
Ref.
9.7
[.383]
Ref.
11.7
[.459]
11.7
[.459]
.250-36 UNS-2A
Frequency Material & Finish Captivation Part No.
DC-12.4GHz Stainless, Passivated Mechanical 1055018-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
123
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMA Connectors (Continued)
In-Series Adapter,
Plug to Plug, Right-Angle
Ref. Plane
Ref. Plane
14.0
[.550]
Ref.
11.1
[.438]
Ref.
7.9
[.312] Hex.
14.0
[.550] Ref.
11.1
[.438]
Ref.
Frequency Material & Finish Captivation Part No.
DC-18.0GHz Stainless, Passivated Mechanical 1055047-1
In-Series Adapter,
Jack to Plug, Connector Saver
.250-36 UNS-2A
13.3
[.524] Ref.
7.9
[.312] Hex.
18.3
[.720] Ref.
Ref. Plane Ref. Plane
5.6
[.219] Across Flats
Frequency Material & Finish Captivation Part No.
DC-18.0GHz Stainless, Passivated Epoxy 1054426-1
Test Adapter,
Plug to Jack,
Quick Release
Ø 12.70
[.500]
Ø 10.20
[.400]
24.90
[.982]
28.60
[
1.125
]
23.00
[.905]
5.50
[.215]
Ref.
Ref.
Ref.
Reference Plane
Across Flats
OSM Jack
Retaining
Ring
.250-36 UNS-2A
OSM Plug
Reference Plane
Frequency Material & Finish Captivation Part No.
DC-18.0GHz Stainless, Passivated Epoxy 1053780-1
In-Series Adapter,
Jack to Jack,
Bulkhead Feedthrough
Recommended
Mounting Hole
Ø 6.4
[.250] Min.
6.0
[.235] Min.
Lock
Washer
.250-36 UNS-2A .250-36 UNS-2A
Ref. PlaneRef. Plane
9.5
[.375]
Hex.
14.6
[.575]
18.4
[.723] Ref.
22.2
[.875]
1.7
[.065]
7.9
[.312] Hex.
6.4
[.250] Max Panel
Frequency Material & Finish Captivation Part No.
DC-18.0GHz Stainless, Passivated Epoxy* 1054869-1
*Mechanically captivated version available. Please consult Tyco Electronics.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
124
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors
Snap-On SMA Series of
RF Connectors
Product Facts
■Positive snap-on interface
facilitates assembly
■Intermateable with
competitor product
■Excellent RF performance to
6 GHz
■Ideal for Communications
and Industrial Applications Tyco Electronics’ next gen-
eration high performance
RF products QMA (Snap-On
SMA) connectors series
offers the same high quality
and performance currently
found in the standard
Tyco Electronics SMA series
but does not require the
coupling nut torque.
By integrating a snap-on
feature to the design,
denser packaging can be
achieved, and the overall
applied cost is dramatically
reduced. The QMA connec-
tor series is excellent for
communications as well as
industrial applications. The
QMA offering is designed
for 100 mating cycles, oper-
ates through 6 GHz, and is
completely intermateable
with competitive QMA offer-
ings. This new QMA prod-
uct is not intermateable with
standard SMA interfaces.
QMA connectors are avail-
able in a broad range of
standard configurations,
including PCB and panel
mount, flexible and semi-
rigid cable, and adapters.
Other options can be
reviewed as well, including
additional cable sizes, PCB
surface mounting, and tape
and reel packaging.
The QMA connector series
is a cost effective solution
for the challenging demands
of today’s commercial mar-
ketplace, with applications
including cellular base sta-
tion, handsets, and test and
measurement. Call your
local sales office or author-
ized distributor for additional
information or samples of
the QMA connector series.
Tyco Electronics is a lead-
ing supplier of RF and
Microwave connectors and
cable assemblies, and pro-
vides advanced technology
products from well known
and industry leading
brands, including AMP and
M/A-COM.
Material and Finish
Shells and Bodies — Brass, nickel
plated
Collars — Phosphor bronze, white
bronze plated
Outer Contacts — Beryllium copper,
nickel plated
Center Contacts — Beryllium copper,
gold plated
Dielectrics — PTFE
Electrical Characteristics
Frequency — dc – 6 GHz
Nominal Impedance — 50 ohms
Voltage Rating — 335 Volts (VRMS
max.) @ Sea Level
VSWR — 1.15 : 1 max. @ 6 GHz
Insulation Resistance —
5,000 megohms min.
Insertion Loss — .25 dB Max @ 6 GHz
Dielectric Withstanding Voltage —
1000 Volts (VRMS max.) @ Sea Level
Contact Resistance —
Center Contact — 5 milliohms max.
Outer Contact — 4 milliohms max.
Mechanical Characteristics
Connector Durability —
100 mating cycles
Force to Engage — 27 Newtons
Force to Disengage — 20 Newtons
Retention Force (mated pair) —
60 Newtons min.
Cable Retention — Dependent upon
cable type
Environmental Characteristics
Temperature Rating —
-40 to +125°C
Vibration — EIA-364-28,
Test Condition VII, Condition D
Shock — EIA-364-27, Method H
Moisture Resistance — EIA-364-31,
Method III
Thermal Shock — EIA-364-32
Note: Performance specifications
are typical, but may not apply to all
connector types.
Related Product Data
Product Specifiation — 108-2087
Sample Kit — 1654882
QMA
Snap-On
Interface
Board
SMA
Threaded
Interface
125
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors (Continued)
Semi-Rigid Cable —
Direct Solder Attachment
Straight Cable Plug
Right-Angle Cable Plug
Cable Part Number
RG 402 1408346-1
Cable Part Number
RG 402 1408347-1
Straight Cable Jack
Bulkhead Cable Jack
Cable Part Number
RG 402 1408348-1
Cable Part Number
RG 402 1408349-1
20.50
[0.81] Ref.
Ø 10.50
[0.41]
18.70
[0.74] Ref.
14.60
[0.57] Ref.
Ø 10.50
[0.41]
Ø 5.60
[0.22]
Ø 5.60
[0.22]
Ø 8.00
[0.31]
10.24
[0.40]
23.05
[0.91]
16.05
[0.63]
7.00
[0.28]
2.00
[0.08]
6.50
[0.26]
Min.
3.20
[0.13] Max. Panel
6.46
[0.25] Across Flat
9.50
[0.38] Hex.
9.50
[0.38] Hex.
18.05
[0.71]
8.71
[0.34]
15.10
[0.60] Ref.
Ø 7.20
[0.28] Min.
Recommended Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
126
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors (Continued)
Cable Dim. A Part Number
RG 174, 22.90 1408333-1
188, 316 0.90
RD 316 22.90 1408333-3
0.90
RG 400 25.20 1408333-5
0.99
RG 58 25.20 1408333-7
0.99
Cable Dim. A Dim. B Part Number
RG 174, 17.20 13.10 1408336-1
188, 316 0.68 0.52
RD 316 17.20 13.10 1408336-3
0.68 0.52
RG 400 19.50 15.40 1408336-5
0.77 0.61
RG 58 19.50 15.40 1408336-7
0.77 0.61
Flexible Cable — Crimp
Attachment
Straight Cable Plug
Cable Dim. A Part Number
RG 174, 25.90 1408338-1
188, 316 1.02
RD 316 25.90 1408338-3
1.02
RG 400 28.20 1408338-5
1.11
RG 58 28.20 1408338-7
1.11
Straight Cable Jack
Cable Dim. A Part Number
RG 174, 9.90 1408339-1
188, 316 0.39
RD 316 9.90 1408339-3
0.39
RG 400 12.20 1408339-5
0.48
RG 58 12.20 1408339-7
0.48
Bulkhead Cable Jack
Right-Angle Cable Plug
Recommended Mounting Hole
Ø 10.50
[0.41]
Ø 10.50
[0.41]
Ø 5.60
[0.22]
Ø 5.60
[0.22]
Ø 7.20
[0.28]
Ø 8.00
[0.31]
8.71
[0.33]
18.05
[0.71]
16.05
[0.63] 2.00
[0.08]
9.10
[0.36]
18.70
[0.74] Ref.
15.10
[0.60] Ref.
A Ref.
A Ref.
Ref.
Plane
A Ref.
A Ref.
B
9.50
[0.38] Hex.
6.46
[0.25] Across Flat
3.20
[0.13] Max. Panel
9.50
[0.38] Hex.
6.50
[0.26] Min.
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
127
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors (Continued)
Printed Circuit Board
Straight Jack Receptacle
Part Number
1408332-1
Recommended Mounting Hole
1.02
[0.04] Sq. Typ.
Ø 1.70
[0.07] Typ.
Ø 1.27
[0.05]
Ø 5.60
[0.22]
15.10
[0.60]
11.00
[0.43] 5.08
[0.20]
Typ.
5.08
[0.20]
Typ.
6.35
[0.25]
Sq.
Right-Angle Jack Receptacle
Part Number
1408337-1
Straight Terminal
Press-In Jack
Recommended Mounting Hole
1.02
[0.04] Sq. Typ.
Ø 1.70
[0.07] 5 Plcs.
5.60
[0.22]
Dia.
5.08
[0.20]
Typ.
5.08
[0.20]
Typ.
6.35
[0.25]
Sq.
12.40
[0.49]
15.60
[0.61]
13.60
[0.54]
9.50
[0.37]
9.95
[.392]
5.00
[.197] 2.00
[.079]
1.20
[.047]
4.00
[.157]
4.50
[.177]
0.75 ± 0.05
[.030 ± .002]
Ø 6.83 ± 0.03
[.269 ± .001]
Body Material Contact RF Leakage Temperature Part
& Finish Captivation db min. Range No.
Brass, Gold Mechanical N/A –65 to 125° C 619215-1
Note: Part Numbers are RoHS compliant except:lIndicates non-RoHS compliant.
128
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
QMA Connectors (Continued)
Adapters — Between Series
QMA Plug to SMA Plug
Part Number
1408393-1
30.60
[1.20] Ref.
7.90
[0.31] Hex. 8.70
[0.34] Hex.
QMA PlugSMA Plug
QMA Jack to SMA Plug
Part Number
1408343-1
21.50
[0.85] Ref.
6.35
[0.25] Hex. 7.90
[0.31] Hex.
SMA Plug
QMA Jack
Adapters — In Series
QMA Plug to QMA Jack
Part Number
1408342-1
27.70
[1.09] Ref.
QMA PlugQMA Jack
Straight Terminal
4-Hole Flange Mount
Jack Receptacle
Part Number
1408341-1
Screw-In Front Mount
Jack Receptacle
Part Number
1408340-1
Ø 2.60
[0.10]
4 Plcs.
Ø 5.60
[0.22]
8.00
[0.31] Hex.
17.90
[0.70]
15.00
[0.60]
1.53
[0.06]
13.55
[0.53]
.250 - 36 UNS-24
12.70
[0.50] Sq.
8.64
[0.34] Typ.
Ø 4.06
[0.16]
Ø 1.27
[0.05]
Ø 5.60
[0.22]
Ø 1.27
[0.05]
Ø 4.06
[0.16]
4.10
[0.16]
1.90
[0.07]
1.50
[0.59]
10.70
[0.42]
20.00
[0.79]
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
129
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Series 1.0/2.3 (50 Ohm/75 Ohm)
RF Coax Connectors
Miniature coaxial connec-
tors series 1.0/2.3 (CECC
22230 and IEC 61169-29)
coaxial connectors are
devised to meet the
requirements of compact
electronic instrumentation.
All plugs and jacks with
Zo= 50 Ωare designed for
a number of different 50 Ω
and 75 Ωcables. Owing
to the large demand, the
Series 1.0/2.3 has also
been optimized as a 75 Ω
design into the GHz range.
The different types of
coupling mechanisms, such
as screw on, slide-in and
latching coupling permit
space-saving installation.
In addition, an extensive
range of measurement
accessories, adapters as
well as terminations is
available. The quality-
determining factors have
been established on the
basis of corresponding
measurements and test
procedures in accordance
with national and interna-
tional standards for RF
connectors (IEC 61169-1,
MIL-C-39012 etc.).
High-quality materials
ensure high reliability even
in industrial atmospheres.
The contact principle is the
pin-socket principle and the
contacts are gold plated to
ensure perfect contact mat-
ing. The inner conductor
parts are held in PTFE
(Polytetrafluoroethylene).
The reduced dimensions of
all component parts of these
connectors permit a com-
pact hole spacing (installa-
tion pitch) of 6.8 [0.27]
depending upon the corre-
sponding cable diameters.
The cable is connected by
crimping the cable braid to
the plug or jack body, the
inner conductor is soldered
or crimped.
In most applications, the
plug and jack belong to the
same coupling type group.
In special instances, such
as for measurement pur-
poses, different coupling
types can be used together.
Between Series Adapters
For Series 1.0/2.3 Adapters please see
pages 251-260.
130
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Series 1.0/2.3 (50 Ohm/75 Ohm) (Continued)
RF Coax Connectors
Technical Data
Electrical and mechanical
characteristics in accordance
with CECC 22230
Characteristic impedance —
50 Ω/75 Ω
Frequency range — up to 10 GHz/
2 GHz
Reflection factor, referred to
50 Ωcable1—
up to 1 GHz, r ≤0.05
up to 4 GHz, r ≤0.07
up to 10 GHz, r ≤0.15
Reflection factor, referred to
75 Ωcable1—
up to 2 GHz, r ≤0.10
Insulation resistance —
initial value ≥1 GΩ
after stressing ≥200 MΩ
Screening effectiveness2—
≥90 dB
Inner conductor contact resistance
— after stressing ≤10 mΩ
Outer conductor continuity —
after stressing ≤7.5 mΩ
Voltage proof3—
flexible cables (RG 316)
— at sea level, 750 V, 50 Hz
— at 20 km altitude, 150 V, 50 Hz
Working voltage3—
flexible cables (RG 316)
— at sea level, 350 V, 50 Hz
— at 20 km altitude, 65 V, 50 Hz
Service life — 500 cycles
Climatic category — 40/85/21
Notes:
1Guide values, depending on cable
type and connector style.
2Values apply to a straight screw
and latching coupling with suitable
cable.
3Some cables suitable for use with
these connectors have lower char-
acteristic values than specified
here.
4For applicable cable types see
page 151.
Coupling Types Type A
Screw coupling; version
with union nut
This type permits the plug
and jack to be screwed
together manually by
means of a union nut
secured to the plug. This
is necessary for readily
accessible locations, front
panel test points and cable
connections.
Type C
Slide-in coupling; version
with centering ferrule
In this type of coupling, the
plug features a guide ferrule
with a conical entry surface.
This ensures that the float-
able bulkhead plugs with
cable connection make a
reliable electrical connec-
tion to the rigid installed
jack. Examples of this are
single and multi-contact
connections of slide-in
applications. “W” denotes
the allowed spacing of the
mounting panel for satisfac-
tory contact when the con-
nection is made.
Type F
Latching coupling (Quick
Lock)
In this version, the cable
plugs bear a funnel ferrule
with built-in spring which
snaps into a groove on the
jack, simultaneously locking
the connection. The connec-
tion can be easily separated
by lightly pulling the outer
sleeve of the plug. This type
of coupling can be used
with a higher packing den-
sity, as the screw coupling.
131
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Series 1.0/2.3, 50 Ohm
RF Coax Connectors
18.0
[0.71]
Ø 6.5
[0.26]
1)
Cable Coupling Type Ø Max. Part No.
RG 316 A 2.67 1393670-1
0.105
Plugs, Solder/Crimp
1) Detent for jack
24.64
[.970]
Ø 7.70
[.303]
Ø 6.20
[.244]
Ø 3.10
[.122]
Cable Coupling Type Ø Max. Part No.
WP93385L2 F 2.67 619223-1
0.105
24.64
[.970]
Ø 7.70
[.303]
Ø 6.20
[.244]
Ø 3.10
[.122]
Cable Coupling Type Ø Max. Part No.
LMR 240 F 2.67 619224-1
0.105
28.50
[1.122]
Ø 7.90
[.311] Max.
Max. Ø 7.90
[.311]
Ø 4.15
[.163]
Cable Coupling Type Ø Max. Part No.
LMR 240FR F 6.3 1460010-1
0.248
25.50
[1.004] Max.
Max.
Ø 7.90
[.311]
Ø 6.20
[.244]
Ø 3.10
[.122]
Cable Coupling Type Ø Max. Part No.
WP93385L2 F 6.3 619085-1
0.248
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
132
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Series 1.0/2.3, 50 Ohm (Continued)
RF Coax Connectors
17.0
[0.67]
Ø 4.1
[0.16]
Ø 1.7
[0.07]
Ø 3.6
[0.14]
Cable Coupling Type Ø Max. Part No.
RG 316 A, C, F 2.6 4-1393670-4
0.10
Bulkhead Jack,
Solder/Crimp
8.0
[0.31]
Ø 4.1
[0.16]
8.4
[0.33]
0.6 1.5
[0.02]...[0.06]
Ø 7.3
[0.29]
Mounting Panel ECN0867
Coupling Type Part No.
C, F 1393670-8
Bulkhead Solder Jack
5.08
[0.2]
Ø 0.9
[0.04]
a
11.1
[0.44]
0.95
[0.04] 0.5
[0.02]
Ø 4.1
[0.16]
6.0
[0.24]
Coupling Dim Part
Type a No.
C, F 14.6 3-1393670-4
0.57
C, F 15.6 3-1393670-5
0.61
Vertical PC Board
Mount Jack
Recommended Mounting Holes
Pitch 2.54
[0.10]
Ø 1.5
[0.06]
Ø 0.9
[0.04]
0.95
[0.04]
5.08
[0.2] 12.0
[0.47]
19.5
[0.77]
16.0
[0.63]
0.5
[0.02]
M5.5x0.5
[0.22]x[0.02]
6.0
[0.24]
Coupling Type Part No.
A, C, F 3-1393670-6
Vertical PC Board Mount
Bulkhead Jack
Recommended Mounting Holes
Pitch 2.54
[0.10]
Ø 1.5
[0.06]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
133
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Series 1.0/2.3, 50 Ohm (Continued)
15.9
[0.63]
M5.5x0.5
[0.22]x[0.02]
Ø 4.1
[0.16]
5.9
[0.23]
7.0
[0.28]
3.3
[0.13]
7.4
[0.29]
3.7
[0.15]
3.6
[0.14]
0.55
[0.02]
Ø 0.55
[0.02]
ECN0870-G
Inner Conductor
Coupling Type Part No.
A, C, F 3-1393670-9
Right-Angle PC Board
Mount Bulkhead Jack
7.3
[0.29]
Ø 1.0
[0.04]
Recommended Mounting Holes
Pitch 2.54
[0.10]
15.00
[.591]
5.28
[.208]
4 Plcs.
Center
Contact
Compliant Pin
4 Plcs.
6.10
[.240]
5.20
[.205]
Coupling Type Part No.
C, F 6274431-1
Vertical PC Board Mount
ACTION PIN Jack
5.08
[.200]
5.08
[.200]
Ø 1.47 ± 0.08
[.058 ± .003]
4 Plcs.
Ø 1.00 ± 0.08
[.039 ± .003]
Recommended Mounting Holes
10.37 ± 0.08
[.408 ± .003]
3.05
[.120]
M5.5 x 0.5
Thread
3.18 ± 0.05
[.125 ± .002]
2.79 ± 0.25
[.110 ± .010]
Ø 5.52 ± 0.038
[.217 ± .001]
Over Knurl Ø 1.27 ± 0.013
[.050 ± .0005]
Ø 7.62 ± 0.05
[.300 ± .002]
Coupling Type Part No.
A, C, F 1274449-1
Panel Mount, Press-in,
Launcher Jack
23.35
[.919]
Recommended
Mountin
g
Holes
13.35
[.526]
5.08
[.200]
5.08
[.200]
6.00
[.236]
6.45
[.254]
M5.5 x 0.5
Ø 9.00
[.354]
Ø 1.00
[.039]
5 Plcs.
Coupling Type Part No.
A, C, F 619107-1
12.95 ± 0.08
[.510 ± .003]
Ø 2.59 ± 0.06
[.102 ± .002]
M5.5 x 0.5
Thread
4 Plcs.
12.70
[.500] Sq.
17.91
[.705]
14.99
[.590]
1.65
[.065]
Ø 1.27 ± 0.03
[.050 ± .001]
8.64
[.340]
4.32
[.170]
Coupling Type Part No.
A, C, F 1274520-1
Panel Mount, 4-Hole
Flange, Launcher Jack
12.10
[.476]
0.80
[.032]
M5.5 x 0.5
Thread
18.00 ± 0.50
[.710 ± .020]
15.00 ± 0.25
[.591 ± .010]
Ø 4.06
[.160]
Ø 1.27
[.050]
5.00
[.197]
Coupling Type Part No.
A, C, F 1274594-1
Front Mount,
Bulkhead Jack
RF Coax Connectors
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
134
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 50 Ohm (Continued)
Series 1.0/2.3, 75 Ohm
Right-Angle PC Board
Mount Bulkhead Jack
20.54 ± 0.15
[.809 ± .006]
17.04 ± 0.15
[.671 ± .006]
7.40
[.291]
1.15
[.045]
Ø 7.34
[.289]
Min.
3.70
[.146]
3.00
[.118]
5.63
[.222]
6.45
[.254]
Coupling Type Part No.
A, C, F 1274544-1
A, C, F 1460060-1
18.0
[0.71]
Ø 6.5
[0.26]
1)
Cable Coupling Type Ø Max. Part No.
RG 179 A 2.67 5-1393670-5
0.105
Plugs, Solder/Crimp
1) Detent for jack
26
[1.02]
Ø 7.9
[0.03]
Cable Coupling Type Ø Max. Part No.
RG 179 F 2.67 6-1393670-2
0.105
ST 212 F 3.2 6-1393670-5
0.13
02Y(St)CY F3.6 6-1393670-4
0.45/2.0 0.14
Part Number 1274544-1
19.40 ± 0.15
[.764 ± .006]
15.90 ± 0.15
[.626 ± .006]
7.00
[.276] Ø 6.00
[.236]
3.70
[.146]
3.00
[.118] 11.40
[.449]
6.45
[.254]
Part Number 1460060-1
15.90
[.626]
3.60
[.142]
0.55
[.022]
7.00
[.276]
3.70
[.146]
3.30
[
.130
]
M5.5 x 0.5
Coupling Type Part No.
A, C, F 1460139-1
Recommended Mounting Holes
Pitch 2.54
[0.10]
Ø 1.0
[0.04]
Plating
Outer Body — Silver
Outer and Center Conductor —
Gold
7.3
[0.29]
Ø 1.0
[0.04]
Recommended Mounting Holes
Pitch 2.54
[0.10]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
135
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Series 1.0/2.3, 75 Ohm (Continued)
RF Coax Connectors
Ø 4.1
[0.16]
13.5
[0.53]
12.0
[0.47]
0.6 1.5
[0.02]...[0.06]
Ø 6.6
[0.26]
ECN0857-P
Mounting Panel
Cable Coupling Type Ø Max. Part No.
RG 179 A, C, F 2.67 8-1393670-0
0.105
Bulkhead Jack,
Solder/Crimp
22.5
[0.89]
4.1
[0.16]
15.7
[0.62]
Ø 7.9
[0.31]
Ø 6.5
[0.26]
Cable Coupling Type Ø Max. Part No.
RG 179 F 2.67 2-1393670-6
0.105
02Y(St)CY F3.6 7-1393670-0
0.45/2.0 0.14
Right-Angle Plug,
Solder/Crimp
29.70
[1.169]
Ø 4.45 ± 0.05
[.175 ± .002]
Ref.
26.00
[1.024] 7.80
[.307]
Ref.
Ø 0.64 ± 0.010
[.025 ± .0004]
Cable Coupling Type Ø Max. Part No.
BELDEN A, C, F 2.67 619226-1
1855A 0.105
Straight Plugs,
Solder/Crimp
37.00
[
1.457
]
7.60
[.299]
Max.
12.00
[.472]
Max.
1.00 ± 0.10
[.039 ± .004]Ø 5.40
[.213]
Ø 7.30
[.287]
Ø 2.10
[.083]
Ref. Plane
7.85
[.309]
Cable Coupling Type Ø Max. Part No.
BT 3002 A, C, F 2.67 1460815-1
0.105
23.00
[.906] Max.
16.00
[.630]
Ref. Ø 8.30
[.327
]
Max.
Cable Coupling Type Ø Max. Part No.
RG 316 F 2.8 619228-1
0.110
23.00
[.906]
23.00
[.906]
Max.
Max.
Ø 3.05
[.120] Ø 6.10
[
.240
]
Ø 7.90
[.311]
Max.
Cable Coupling Type Ø Max. Part No.
RA 7000 A, C, F 2.67 1460817-1
0.105
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
136
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.0/2.3, 75 Ohm (Continued)
Ø 0.9
[0.04]
0.95
[0.04]
5.08
[0.2] 12.0
[0.48]
21.0
[0.83]
17.5
[0.69]
0.5
[0.02]
M5.5x0.5
[0.22]x[0.02]
6.0
[0.24]
Ø 7.3
[0.29]
Coupling Type Part No.
A, C, F 8-1393670-3
Vertical PC Board Mount
Bulkhead Jack
Recommended Mounting Holes
Pitch 2.54
[0.10]
Ø 1.5
[0.06]
23.35
[.919]
Recommended
Mountin
g
Holes
13.35
[.526]
5.08
[.200]
5.08
[.200]
6.00
[.236]
6.45
[.254]
M5.5 x 0.5
Ø 9.00
[.354]
Ø 1.00
[.039]
5 Plcs.
Coupling Type Part No.
A, C, F 619106-1
Vertical PC Board Mount
Bulkhead Jack
16.8
[0.66] Ø 4.1
[0.16]
13.4
[0.53]
3.6
[0.14]
12.7
[0.5] Ø 7.3
[0.29]
Cable Coupling Type Ø Max. Part No.
RG 179, 316 A, C, F 2.67 3-1393670-2
0.105
Right-Angle Bulkhead Jack,
Solder/Crimp
PC Board Mount
Bulkhead Jack
22.30
[.878]
0.50
[.020]
4.80 ± 0.12
[.189 ± .005]
12.00
[.472]
5.80
[.228]
Min.
6.50
[.256]
2.30
[.091] 0.20
[.008] Min.
Sq.
Ø 7.30
[.287] M5.5 x 0.5
[.020]
5.08
[.200]
3.00
[.118]
0.95
[.037]
Ø 0.90
[.035]
Coupling Type Ø Max. Part No.
A, C, F 1.00-2.30 619220-1
.039-.091
Recommended Mounting Holes
Pitch 2.54
[0.10]
Ø 1.5
[0.06]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
137
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Series 1.0/2.3, 75 Ohm (Continued)
RF Coax Connectors
Accessories
for 50 Ohm and 75 Ohm
0.8
[0.03]
2.1
[0.08]
5.0
[0.20]
2.4
[0.09]
4.8
[0.19]
3.5
[0.14]
Part No.
2-1393562-2
For cable size similar to RG 179
and RG 316
Soldering aid (sleeve) for jack 1393670-8 with solder connection.
ECN0900-7
+ 0.00
– 0.50
+ .000
– 0.02
3.5
[0.14 ]+ 0.00
– 0.50
+ .000
– 0.02
5.5
[0.22 ]
+ 0.00
– 0.50
+ .000
– 0.02
8.5
[0.33 ]
Installation example:
ECN0901-F
Sleeve Pushed onto
Shielding Braid
Tin-Soldered
No. of Ports Coupling Type Part No.
2A, C, F 1274714-3
3A, C, F 1274714-2
4A, C, F 1274714-1
Straight PCB Jacks,
Multi-Port
19.00
[.748]
23.10
[.307]
4.00
[.157]
11.00
[.433]
2 Plcs.
8.00
[.315]
5.00
[.197] 10.00
[.394]
6.00
[.236]
10.00
[.394]
29.00
[1.142]
23.10
[.307]
4.00
[.157]
11.00
[.433]
3 Plcs.
8.00
[.315]
15.00
[.591]
10.00
[.394]
6.00
[.236]
20.00
[.787]
39.00
[1.535]
23.1
0
[.307]
4.00
[.157]
11.00
[.433]
4 Plcs.
8.00
[.315]
15.00
[.591]
10.00
[.394]
6.00
[.236]
Part Number 1274714-3 Part Number 1274714-2 Part Number 1274714-1
5.00
[.197]
Typ. 10.00
[.394]
Typ.
Ø 2.20
[.087] 4 Plcs.
1.80
[.071]
4.20 ± 0.05
[.165 ± .002]
8.00 ± 0.05
[.315 ± .002]
2 Plcs.
4 Plcs.
Ø 1.53
[.060]
R 0.765
[.030]
2 Plcs.
Recommended PC Board Layout
2 Positions Shown
10.00
[.394]
Typ.
Note:For more accessories, see
page 147. Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.
138
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm)
General
The Series 1.6/5.6 mS con-
nectors have been modified
to incorporate improved
technical advantages.
Transmission values have
been greatly improved
while maintaining the
proven positive characteris-
tics of the previous genera-
tions. All types of this new
“third generation” Series
1.6/5.6 mS connectors are
connection-compatible with
their predecessor.
Today’s PCM technology
demands place the Series
1.6/5.6 mS connectors as a
most suitable component for
transmission of high bit rates.
Connectors are available in
straight and angled ver-
sions as well as with differ-
ent mechanisms for screw
(type A), snap-on (type B),
slide-in (type C), and latch-
ing (type F) coupling. All
connectors of different cou-
pling mechanisms are com-
patible with each other.
The connectors are
designed according to the
pin-socket principle. The
contacts are partially gold-
plated, ensuring long serv-
ice life and stable contact
resistance for a high num-
ber of intermateability
cycles.
The inner conductor parts
are secured so that they
cannot be displaced. The
insulating parts are made of
PEEK (polyetheretherke-
tone) or PC (polycarbonate).
the scope of delivery. The
connectors are character-
ized by high mechanical
strength and low space
requirement.
Connection possibilities
exist for a number of differ-
ent cables, including
highly-flexible cable types
(with foam insulation) with
low attenuation or small
diameter. Terminations and
adapters (see also meas-
urement accessories) round
out the spectrum.
The cable inner conductors
are soldered on, while the
outer conductors are
screwed or crimped on.
Also, cable clamp which is
independent of the braid
clamping secures the con-
nection point against tensile
stressing for both methods
of connection.
In addition, assembly-
friendly connectors with full
crimp and IDC (Insulation
Displacement Contact) con-
nection are included within
9.2
[0.36]
M9x0.5
[0.35]x[0.02]
Ø 5.6
[0.22]
Ø 1.0
[0.03]
4.1
[0.16] 5.5
[0.22]
6.5
[0.26]
9.7
[0.38]
M9x0.5
[0.35]x[0.02]
6.7
[0.26]
Ø 8.25
[0.32]
Ø 2.5
[0.10]
Ø 6.6
[0.26]
0.25
[0.01] 7.0
[0.28]
Plug Jack
ECN0934-R
Between Series Adapters
For Series 1.6/5.6 Adapters please see
pages 253-262.
139
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Technical data
Electrical and mechanical
characteristics in accordance
with CECC 22240
Characteristic impedance — 75 Ω
Frequency range — up to 8 GHz
Reflection factor1, referred to —
flexible cables, straight types —
up to 1 GHz, r ≤0.02
up to 4 GHz, r ≤0.06
up to 8 GHz, r ≤0.10
flexible cables, angled types —
up to 1 GHz, r ≤0.04
up to 2 GHz, r ≤0.06
up to 4 GHz, r ≤0.10
Insulation resistance —
initial value, ≥10 GΩ
after stressing, ≥1 GΩ
Screening effectiveness —
(straight screw connector at 1 GHz)
≥100 dB
Inner conductor contact
resistance — after stressing ≤8 mΩ
Outer conductor continuity — after
stressing ≤4 mΩ
Voltage proof2—
flexible cables (RG 59) —
at sea level, 1.5 kV, 50 Hz
at 20 km altitude, 300 V, 50 Hz
Working voltage2—
flexible cables (RG 59) —
at sea level, 500 V, 50 Hz
at 20 km altitude, 125 V, 50 Hz
Service life — 500 cycles
Climactic category — 40/85/21
Notes:
1Guideline values, depending on
cable type and connector style.
2Some cable types suitable for use
with these connectors have lower
characteristic values than specified
here.
3For applicable cable types see
page 151.
Coupling Types Type A
Screw coupling; version
with union nut
This type permits the plug
and jack to be screwed
together manually by means
of a union nut secured to
the plug manually, thus pre-
venting the coupling from
being pulled apart. This is
necessary for readily acces-
sible locations, front panel
test points and cable con-
nections.
Type B
Snap-on coupling (push-pull)
Connectors of this type offer
fast make/break. They can
be used for test and mainte-
nance applications and also
if there is lack of space and
connectors with screw cou-
pling cannot be used.
Type C
Slide-in coupling; version
with centering ferrule
In this type of coupling, the
plug features a guide ferrule
with a conical entry surface.
This ensures that the float-
able bulkhead plugs with
cable connection make a
reliable electrical connec-
tion to the rigid installed
jack. Examples of this are
single and multi-contact
connections of slide-in
applications. “W” denotes
the allowed spacing of the
mounting panel for satisfac-
tory contact when the con-
nection is made.
Type F
Latching coupling (Quick
Lock)
In this version, the cable
plugs bear a funnel ferrule
with built-in spring which
snaps into a groove on the
jack, simultaneously locking
the connection. The connec-
tion can be easily separated
by lightly pulling the outer
sleeve of the plug. This type
of coupling provides the
same amount of axial tensile
strength as the screw cou-
pling, but can be used with
a higher packing density.
140
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Ø 10.8
[0.43]
37.0
[1.46]
Ø 10.8
[0.43]
Cable Coupling Type Ø Max. Part No.
2YCCY A7.8 1393682-1
0.7/4.4 0.31
Plugs, Solder/Clamp
Plugs, Solder/Crimp
Ø 12.8
[0.50]
37.0
[1.46]
Ø 10.8
[0.43]
Cable Coupling Type Ø Max. Part No.
2YCCY 1.0/6.5 A9.8 1393682-2
2YC(mS)CY 1.0/6.5 0.31
Ø 10.8
[0.43]
Ø 11.5
[0.45]
30.2
[1.19]
Cable Coupling Type Ø Max. Part No.
02Y(St)CY 0.45/2.0 F 3.6 1393681-8
0.14
Ø 10.8
[0.43]
a
Ø 10.8
[0.43]
Cable Coupling Dim. Ø Max. Part No.
Type a
2YCY 0.4/2.5 A 30.7 4.1 1-1393682-1
1.21 0.16
2YCCY 0.4/2.5 A 30.7 4.8
1.21 0.19 1-1393682-2
2YC(mS)CY 0.4/2.5 A 30.7 5.0
1.21 0.20
2YCY 0.7/4.4 A 32.9 6.1
1.30 0.24
RG 59 A 32.9 6.25 1-1393682-3
1.30 0.25
2YC(mS)CY 0.5/3.0 A 32.9 6.2
1.30 0.24
Ø 10.8
[0.43] Ø 10.8
[0.43]
a
Cable Coupling Dim. Ø Max. Part No.
Type a
RG 179 A 32.5 2.6 1393680-2
1.28 0.105
2YCCY 0.4/2.5 A 32.5 4.8
1.28 0.19 1393680-3
2YC(mS)CY 0.4/2.5 A 35.5 5.0
1.40 0.20
2YC(mS)CY 0.5/3.0 A 35.5 6.2 1393680-4
1.40 0.24
2YCY 0.7/4.4 A 35.5 6.1 1393680-5
1.40 0.24
02Y(St)CY 0.45/2.0 A 32.5 3.6 1393680-9
1.28 0.14
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
141
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Ø 10.8
[0.43] Ø 11.5
[0.45]
32.0
[1.26]
Version with Preassembled Insulation
Cable Coupling Type Ø Max. Part No.
02Y(St)CY 0.45/2.0 F 3.6 1393672-3
0.14
Ø 10.8
[0.43] Ø 11.5
[0.45]
32.0
[1.26]
Preassembled Isolation Parts
Cable Coupling Type Ø Max. Part No.
02Y(St)CY 0.45/2.0 F 3.6 1393672-9
0.14
35.00
[1.378]
Ø 11.80
[.465]
Ø 3.80
[.150]
Ø 1.30
[
.051
]
Min.
Preassembled Version
Cable Coupling Type Ø Max. Part No.
02YS(St)CHH 0.25/1.2 F 2.9 1460132-1
0.11
Series 1.6/5.6 mS (75 Ohm)
Plugs, Solder/Crimp
(Continued)
24.7
[0.97]
Ø 10.8
[0.43]
Ø 10.8
[0.43]
18.2
[0.72]
Cable Coupling Type Ø Max. Part No.
RG 179 A 2.67 2-1393682-3
0.105
24.2
[0.95]
Ø 11.5
[0.45]
Ø 10.8
[0.43]
13.0
[0.51]
Cable Coupling Type Ø Max. Part No.
02Y(St)CY 0.45/2.0 F 3.6 1-1393681-0
0.14
Right-Angle Plugs,
Solder/Crimp
24.7
[0.97]
Ø 10.8
[0.43]
a
Ø 10.8
[0.43]
Cable Coupling Dim. Ø Max. Part No.
Type a
2YCCY 0.4/2.5 A 13.0 4.8
0.51 0.19 2-1393682-0
2YC(mS)CY 0.4/2.5 A 13.0 5.0
0.51 0.20
2YCY 0.7/4.4 A 15.8 6.1
0.62 0.24
RG 59 A 15.8 6.25 2-1393682-2
0.62 0.25
2YC(mS)CY 0.5/3.0 A 15.8 6.2
0.62 0.24
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
142
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Right-Angle Plugs,
Solder/Crimp
24.7
[0.97]
Ø 10.8
[0.43]
a
Cable Coupling Dim. Ø Max. Part No.
Type a
02Y12YC(mS)C6Y A15.0 4.0 1-1393680-6
0.45/2.0 0.59 0.16
02Y(St)CY 0.45/2.0 A 15.0 3.6 1-1393680-8
0.59 0.14
Right-Angle Plugs,
IDC Connection
24.7
[0.97]
IDC Connection
17.5
[0.69]
Ø 10.8
[0.43]
ECN1615-7
Cable Coupling Type Ø Max. Part No.
02Y(St)CY 0.45/2.0 A 3.6 1393757-9
0.14
2YCY 0.4/2.5 A 4.1 1393757-8
0.16
Right-Angle Plug,
Solder/Crimp
25.0
[0.98]
ECN0976-2
15.0
[0.59]
Ø 11.5
[0.45]
Crimp Connection
Cable Coupling Type Ø Max. Part No.
02Y(St)CY 0.45/2.0 F 3.6 1393672-5
0.14
Bulkhead Jacks,
Solder/Clamp
Ø 10.8
[0.43] Ø 10.8
[0.43]
a
M9.0x0.5
[0.35]x[0.02]
Ø 8.2
[0.32]
Mounting Panel
14.3
[0.56]
Max.
2.0
[0.08] Max.
Cable Coupling Dim. Ø Max. Part No.
Type a
2YCY 0.4/2.5 A, B, F 28.1 4.1 3-1393682-2
1.11 0.16
2YCCY 0.4/2.5 A, B, F 28.1 4.8
1.11 0.19 3-1393682-3
2YC(mS)CY 0.4/2.5 A, B, F 28.1 5.0
1.11 0.20
2YCY 0.7/4.4 A, B, F 30.4 6.1
1.20 0.24
RG 59 A, B, F 30.4 6.25 3-1393682-5
1.20 0.25
2YC(mS)CY 0.5/3.0 A, B, F 30.4 6.2
1.20 0.24
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
143
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Ø 10.8
[0.43] Ø 10.8
[0.43]
32.5
[1.28]
M9.0x0.5
[0.35]x[0.02]
Ø 8.2
[0.32]
10.6
[0.42]
2.5
[0.10] Max.
Mounting Panel
Cable Coupling Type Ø Max. Part No.
RG 179 B, C, F 2.67 4-1393682-2
0.105
12.0
[0.47]
8.0
[0.31]
Ø 10.8
[0.43]
Ø 8.2
[0.32]
Ø 0.6
[0.02]
Mounting
Panel
19.4
[0.76]
6.5
[0.26]
3.0
[0.12]
Max.
ECN0984-S
M9.0x0.5
[0.35]x[0.02]
Coupling Part
Type No.
A, B, C, F 1-1393681-3
Ø 12.8
[0.50]
Ø 10.8
[0.43]
34.5
[1.36]
M9.0x0.5
[0.35]x[0.02]
Ø 8.2
[0.32]
14.3
[0.56]
Max.
2.0
[0.08] Max.
Mounting Panel
ECN0944-Y
Cable Coupling Type Ø Max. Part No.
2YCCY 1.0/6.5 A, B, F 9.8
0.38 1393682-4
2YC(mS)CY 1.0/6.5 A, B, F 9.8
0.38
a
12.0
[0.47]
1.7
[0.07]
Ø 10.8
[0.43]
Ø 8.2
[0.32]
ECN0982-B
Mounting
Panel
19.4
[0.76]
3.0
[0.12]
Max.
M9.0x0.5
[0.35]x[0.02]
Dim. a Ø Max. Part No.
22.3* A, B, C, F 1-1393681-1
0.88
23.5 A, B, C, F 1-1393681-9
0.93
*Without soldering tags on outer conductor,
dimension aup to inner conductor end.
Bulkhead Jacks,
Solder/Clamp (Continued)
Bulkhead Jacks,
Solder/Crimp
Ø 10.8
[0.43] Ø 10.8
[0.43]
29.8
[1.17]
M9.0x0.5
[0.35]x[0.02]
Ø 8.2
[0.32]
14.3
[0.56]
Max.
2.0
[0.08] Max.
Mounting Panel
ECN0947 N
Cable Coupling Type Ø Max. Part No.
RG 179 A, B, F 2.67 2-1393680-2
0.105
02Y12YC(mS)C6Y A, B, F 4.0 2-1393680-4
0.45/2.0 0.16
06YCC(St)6Y 0.4/1.6 A, B, F 3.3 2-1393680-5
0.13
02Y(St)CY 0.45/2.0 A, B, F 3.6 0-1393672-6
0.14
With preassembled insulation parts
Cable Coupling Type Ø Max. Part No.
02Y(St)CY 0.45/2.0 A, B, F 3.6 0-1-1393672-4
0.14
Bulkhead Jacks, Solder
Ø 10.8
[0.43]
Ø 10.8
[0.43]
29.8
[1.17]
M9.0x0.5
[0.35]x[0.02]
Ø 8.2
[0.32]
2.0
[0.08] Max.
Mounting Panel
Crimp Connection
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
144
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
21.0
[0.83]
Ø 12.8
[0.50]
Ø 10.8
[0.43]
Ø 8.2
[0.32]
Mounting
Panel
13.8
[0.54]
28.4
[1.12]
2.0
[0.08]
Max.
ECN0966-U
M9.0x0.5
[0.35]x[0.02]
Cable Coupling Type Ø Max. Part No.
2YCCY 1.0/6.5 A, B, F 9.8
0.39 1393682-8
2YC(mS)CY 1.0/6.5 A, B, F 9.8
0.39
Right-Angle Bulkhead Jack,
Solder/Clamp
Right-Angle Bulkhead Jack,
Solder/Crimp
a
Ø 10.8
[0.43]
Ø 10.8
[0.43]
Ø 8.2
[0.32]
Mounting
Panel
12.6
[0.50]
27.2
[1.07]
2.0
[0.08]
Max.
ECN0967-3
M9.0x0.5
[0.35]x[0.02]
Cable Coupling Dim. Ø Max. Part No.
Type a
02Y(St)CY 0.45/2.0 A, B, F 13.0 3.6 4-1393682-9
0.51 0.14
2YCCY 0.4/2.5 A, B, F 13.0 4.8
0.51 0.19 4-1393682-6
2YC(mS)CY 0.4/2.5 A, B, F 13.0 5.0
0.51 0.20
2YCY 0.7/4.4 A, B, F 15.8 6.1
0.62 0.24
RG 59 A, B, F 15.8 6.25 4-1393682-8
0.62 0.25
2YC(mS)CY 0.5/3.0 A, B, F 15.8 6.2
0.62 0.24
a
Ø 10.8
[0.43]
Ø 8.2
[0.32]
Mounting
Panel
12.6
[0.50]
27.2
[1.07]
2.0
[0.08]
Max.
ECN0969-J
M9.0x0.5
[0.35]x[0.02]
Cable Coupling Dim. Ø Max. Part No.
Type a
RG 179 A, B, F 15.0 2.67 3-1393680-0
0.59 0.105
2YCCY 0.4/2.5 A, B, F 15.0 4.8
0.59 0.19 3-1393680-2
2YC(mS)CY 0.4/2.5 A, B, F 15.0 5.0
0.59 0.20
02Y12YC(mS)C6Y A, B, F 15.0 4.0 3-1393680-5
0.45/2.0 0.59 0.16
06YCC(St)6Y A, B, F 15.0 3.3 4-1393682-3
0.4/1.6 0.59 0.13
02Y(St)CY 0.45/2.0 A, B, F 15.0 3.6 3-1393680-7
0.59 0.14
27.2
[1.07] Max.
Ø 10.8
[.43] Ø 8.2
[.32]
M9 x 0.5
[.35 x .02]
a
1.35
[.053] Min. 3.80
[
.150
]
Cable Coupling Dim. Ø Max. Part No.
Type a
02YS(St)CHH 0.25/1.2 A, B, F 15.0 2.9 1460128-1*
0.59 0.11
02YS(St)CHH 0.25/1.2 A, B, F 15.0 2.9 *1460169-1**
0.59 0.11
* Tray Packaging.
** Individual Packaging.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
145
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Right-Angle Bulkhead Jack,
IDC Connection
Vertical PC Board
Mount Jack
PC Board Mount
Bulkhead Jack
Ø 10.8
[0.43]
Ø 8.2
[0.32]
ECN1614-Y
Mounting
Panel
12.6
[0.50]
17.5
[0.69]
27.2
[1.07]
2.0
[0.08]
Max. M9.0x0.5
[0.35]x[0.02]
Cable Coupling Type Ø Max. Part No.
02Y(St)CY 0.45/2.0 A, B, F 3.6 1-1393757-6
0.14
Ø 8.2
[0.32]
Ø 9.0
[0.35]
Ø 0.8
[0.03]
14.4
[0.57]
4.2
[0.17]
1.0
[0.04]
0.8
[0.03]
29.2
[1.15]
ECN0986-9
M9.0x0.5
[0.35]x[0.02]
Ø 1.3
[0.05]
10.0
[0.39]
10.8
[0.43]
5.08
[0.20] 5.08
[0.20]
Pitch 2.54
[0.10]
Coupling Type Part No.
A, B, F 1-1393681-6
Recommended
Mounting Holes
View A
Recommended Mounting Holes
Ø 8.2
[0.32]
a
b
c
M9.0x0.5
[0.35]x[0.02]
10.8
[0.43]
10.0
[0.39]
5.08
[0.20]
5.08
[0.20]
Inner- and outer conductor, press-fit
Coupling Type Dim. a Dim. b Dim. c Part No.
A, B, F 6.0 27.2 16.4 2-1393757-0
0.24 1.07 0.65
+ 0.09
– 0.06
+ 0.004
– 0.002
Ø 1.0
[0.04 ]5 Plcs.
Pitch 2.54
[0.10]
Thickness 1.5
[0.06] Max.
Recommended
Mounting Holes
Ø 7.00
[.276]
Ø 1.00
[.039]
Center
Contact
23.20
[.913]
Ø 9.00
[.354]
Ø 10.80
[.425]
4.50
[.177]
7.05 ± 0.05
[.278 ± .002]
M9 x 0.5-6g
Thread
3.00 ± 0.13
[.118 ± .005]
Center Contact
2.00
[.079]
3.00
[.118]
6.50
[.256]
Typ.
Coupling Type Part No.
A, B, F 1274513-1
Ø 1.20
[.047]
Ø 1.50
[.059]
4 Plcs.
5.60
[.220]
5.60
[.220]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
146
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Series 1.6/5.6 mS (75 Ohm) (Continued)
Right-Angle PC Board
Mount Bulkhead Jack
Ø 8.2
[0.32]
a
b
cM9.0x0.5
[0.35]x[0.02]
d
4.5
[0.18]
Coupling Dim. Dim. Dim. Dim. Dim. Part No.
Type abcde
A, B, F 4.0 16.0 6.0 10.75 1.3 2-1393681-1
0.16 0.63 0.24 0.42 0.05
A, B, F 3.3 16.0 6.0 10.75 1.3 2-1393681-2
0.13 0.63 0.24 0.42 0.05
A, B, F 3.7 22.9 6.45 11.25 1.8 2-1393681-3*
0.15 0.90 0.25 0.44 0.07
*With positioning and snap-on system onto PC board
Ø 1.3
[0.05]
Ø e
4 Plcs.
Pitch 2.54
[0.10]
Recommended
Mounting Holes
Ø 10.8
[0.43]
24.4
[0.96]
b
a
Ø 10.8
[0.43]
22.3
[0.88]
b
a
Coupling Type Dim. a Dim. b Part No.
±0.1 [0.004] Max.
A15.0 26.5 6-1460823-1
0.59 1.04
Coupling Type Dim. a Dim. b Part No.
±0.1 [0.004] Max.
B15.0 26.5 6-1460823-2
0.59 1.04
U-link Plug/Plug
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Series 1.6/5.6 mS (75 Ohm) (Continued)
Plug 1.6/5.6 to Jack 1.0/2.3
Coupling Part
Type No.
A, F22-1393670-2
A, F26-1460821-2
2Only jack side
Measurement Accessories
Plug 1.6/5.6 to Plug 1.0/2.3
Coupling Part
Type No.
A6-1460821-1
Between Series Adapters
(75 Ohm)
Ø 10.8
[0.43]
28.0
[1.10]
9.2
[0.36] 8.9
[0.35]
Ø 6.5
[0.26]
1) 1)
Ø 10.8
[0.43]
33.0
[1.30]
9.2
[0.36]
Ø 4.1
[0.16]
1)
147
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
2.3
[0.09]
M9.0x0.5
[0.35]x[0.02]
Ø 10.8
[0.43]
Threaded ring for installation
of bulkhead jacks
Accessories
Soldering aid (sleeve) for jack
(1-1393681-9) with solder
termination
Part No.
2-1393562-2
Cable stripping and installation
example: see Part number
2-1393562-2 under “Series 1.0/2.3”,
page 137.
0.8
[0.03]
2.1
[0.08]
5.0
[0.20]
2.4
[0.09]
4.8
[0.19]
3.5
[0.14]
Part No.
1-1393562-0
These components are pro-
vided when bulkhead jack
part numbers are ordered,
but can also be ordered
separately.
1) Detent for jack
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
148
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Measurement Accessories (Continued)
Between Series Adapters
(75 Ohm) (Continued)
BNC Plug to Jack 1.6/5.6
Part No.
7-1393665-6
BNC Plug to Plug 1.6/5.6
Part No.
7-1393665-4
Ø 14.5
[0.57]
46.4
[1.83]
Ø 10.8
[0.43]
ECN1669-6
Ø 14.5
[0.57]
44.3
[1.74]
Ø 8.2
[0.32]
ECN1670-9
Plug 1.0/2.3 to Jack 1.6/5.6
Coupling Part
Type No.
A, B2, F26-1460821-3
2Only jack side
Ø 6.5
[0.26]
34.5
[1.36]
8.9
[0.35]
Ø 8.2
[0.32]
Ø 10.8
[0.43]
1)
1) Detent for jack
Jack 1.0/2.3 to Jack 1.6/5.6
Coupling Part
Type No.
A, B, F 6-1460821-4
Ø 4.1
[0.16]
39.4
[1.55]
Ø 8.2
[0.32]
Ø 10.8
[0.43]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
149
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Measurement Accessories (Continued)
Termination (75 Ohm)
Plug 1.6/5.6
Coupling Power Part
Type W No.
A1.0 6-1393665-1
Jack 1.0/2.3
Coupling Power Part
Type W No.
A, F 0.6 7-1393665-3
Standard Termination
Plug 1.0/2.3
Coupling Power Part
Type W No.
A0.6 7-1393665-2
15.0
[0.59]
Ø 6.5
[0.26]
8.9
[0.35]
1)
23.1
[0.91]
Ø 4.1
[0.16]
Ø 6.5
[0.26]
29.6
[1.17]
Ø 10.8
[0.43]
1) Detent for jack
Between Series Adapters
(75 Ohm) (Continued)
BNC Jack to Plug 1.6/5.6
Part No.
7-1393665-7
BNC Jack to Jack 1.6/5.6
Part No.
7-1393665-5
Ø 9.6
[0.38]
45.4
[1.79]
Ø 10.8
[0.43]
Ø 11.0
[0.43]
Ø 14.5
[0.57]
ECN1671-H
Ø 9.6
[0.38]
45.4
[1.79]
Ø 8.2
[0.32]
Ø 11.0
[0.43]
Ø 14.5
[0.57]
M9.0x0.5
[0.35]x[0.02]
ECN1672-Q
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
150
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Measurement Accessories (Continued)
In-Series Adapter (75 Ohm)
Adapter 1.6/5.6, Jack/Jack
Coupling Part
Type No.
A, B, F 1-1393665-1
Note:
U-link connectors see “1.6/5.6”
section, page 146.
Adapter 1.6/5.6, Plug/Jack
Coupling Part
Type No.
A, B*, F* 1-1393681-7
*Jack side only
Adapter 1.6/5.6, Plug/Plug
Coupling Part
Type No.
A1393681-6
43.8
[1.73]
Ø 10.8
[0.43]
41.3
[1.63]
Ø 8.2
[0.32]
M9.0x0.5
[0.35]x[0.02]
Ø 10.8
[0.43]
28.4
[1.12]
Ø 8.2
[0.32]
M9.0x0.5
[0.35]x[0.02]
14.3
[0.56]
Ø 10.8
[0.43]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Coaxial Cables
List of the coaxial cables that are listed in the various
connector series of this section.
Cable-Type Designation
Characteristic Max. Cable Dielectric Diameter (mm)/
VDE Designation2) US Designation IEC Designation
Impedance (Ω)Outer Diameter (mm) Material1) Manufacturer des. 96-IEC
50 1.9 0.91max/PTFE 5YC5Ye 0.3/0.86 RG 178 50-1-1
50 2.1 0.87/PTFE — RG 196 50-1-2
50 2.25 1.71max/PTFE 5YK 0.51/1.68 RG 405 —
50 2.6 1.60max/PTFE 5YC5Ye 0.5/1.5 RG 316 50-2-1
50 2.8 1.60max/PE 2YCY 0.5/1.5 RG 174 —
50 3.0 1.52/PTFE 5YCC5Y 0.5/1.5 RD 316 —
50 3.6 3.01max/PTFE 5YK 0.9/3.0 RG 402 —
50 6.4 5.38max/PTFE 5YK 1.63/5.33 RG 401 —
75 2.67 1.68max/PTFE 5YC6Y 0.3/1.6 RG 179 75-2-1
75 3.0 1.60max/PTFE — RD 179 —
75 3.3 1.68max/Cell-FEP 06YCC(St)6Y 0.4/1.6 — —
75 3.2 2.1max — ST 212 —
75 3.6 2.0max/Cell-PE 02Y(St)CY 0.45/2.0 — —
75 4.0 2.0maxE/Cell-PE 02Y12YC(mS)C6Y 0.45/2.0 — —
75 4.0 2.54max/PE 2YCY 0.4/2.5 — —
75 4.8 2.54max/PE 2YCCY 0.4/2.5 — —
75 5.0 2.54max/PE 2YC(mS)CY 0.4/2.5 — —
75 6.1 4.25max/PE 2YCY 0.7/4.4 — —
75 6.2 2.83max/PE 2YC(mS)CY 0.5/3.0 — —
75 6.25 3.8max/PE 2YCY 0.58/3.7 RG 59 —
75 7.8 4.43max/PE 2YCCY 0.7/4.4 — —
75 9.8 6.4/PE 2YCCY 1.0/6.5 — —
75 9.8 6.4/PE 2YC(mS)CY 1.0/6.5 — —
1) Material label
PTFE Polytetrafluorethylene
PE Polyethylene
FEP Perfluorethylene propylene
PFA Perfluoralkoxy copolymer
2) Mounting label of the VDE type numbers (from inside to outside)
Example:
6Y C (mS) C Y 0.7/4.0 -75 (r2/100) vs gr
Dielectric
1st screen
Intermediate layer
2nd screen
Outer jacket
Diameter inner conductor/dielectric
Characteristic impedance
Max. reflection (r) in % / frequency in MHz
Specifications on inner conductor and/or jacket color
Explanation
Dielectric and Jacket
2Y = PE
5Y = PTFE
02Y = Cell PE
06Y = Cell FEP
6Y = FEP
Screen:
C = Cu braiding
K = Cu tape
Intermediate layer:
mS = magnetic screen
St = static screen
Specifications on inner
conductor:
vs = silver plated
staku = Bare copper-clad
steel wire
conductor
Jacket color:
gn = green
gr = grey
rt = red
ws = white
151
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
152
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors
Product Facts
■Intermateable with
Corning Gilbert GPO Series
Connector
■DESC approved
■Enhanced performance
features
■Simplified Assembly
SMP microminiature push-on
coaxial connectors provide
solutions for today’s modu-
lar designs with denser
packaging requirements.
The extremely small size of
the SMP offers a versatile
solution for high density
packaging allowing
connector center-to-center
spacing of 4.32 [0.17]. The
push-on interface facilitates
easier assembly and test
with a positive snap-in fea-
ture to indicate a fully
mated connection. The
rugged SMP interface can
withstand harsh environ-
ments of mechanical shock
and vibration, typically
found in military or aero-
space related applications.
This SMP connector inter-
face is the standard used
by Defense Electronics
Supply Center (DESC) to
generate the SMP push-on
connector series.
SMP connectors can be
your design solution for
mechanical packaging and
frequency response. The
SMP interface provides
0.020" of radial misalign-
ment for critical blindmate
applications. Mating forces
are strictly controlled to
ensure reliable connections
per mated pair or when
simultaneously mating mul-
tiple connectors. Cable
jacks include an anti-rock-
ing ring to ensure reliable
mechanical performance
regardless of the operating
environment. SMP connec-
tors offer enhanced broad-
band VSWR performance of
1.15:1 max thru 26GHz and
1.40:1 max thru 40GHz.
Standard design SMP
configurations include
cable connectors, straight
and right-angle, for 0.047
and 0.085 semi-rigid cable,
full detent, limited detent
and smooth bore mating
shrouds that can be bulk-
head or flange mounted
and glass feedthroughs for
coax to circuit launchers.
In-series adapters for mod-
ule to module intermating
and between series
adapters for integrating
or testing systems or
components parameters.
SMP Shroud and Jack to Jack Adapter Assembly
Typical VSWR for SMP Jack to Jack Adapter
Part Numbers 1056700-1 and 1056721-1
1.50:1
1.40:1
1.30:1
1.20:1
1.10:1
0.0 8.0 16.0 24.0 32.0 40.0 GHz
VSWR
Between Series Adapters
For SMP Between Series Adapters,
see pages 253-262.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
GPO is a trademark of Corning Gilbert, Inc.
153
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
General
Materials and Finishes
Housings and Center Contacts Beryllium Copper per ASTM-B-196; gold plate over nickel plate
Dielectric PTFE Fluorocarbon per ASTM-D-1457
Shrouds Stainless steel per ASTM-A582 Type 303; passivate per ASTM-A380
Hermetic Seal Glass bead
Electrical
Frequency Range dc - 40.0 GHz
VSWR 1.10:1 Maximum dc - 23.0 GHz
1.15:1 Maximum 23.0 - 26.0 GHz
1.40:1 Maximum 26.0 - 40.0 GHz
Voltage Rating 335 Vrms maximum at sea level
Insertion Loss 0.10 f√(GHz) maximum
Insulation Resistance 5000 megohms minimum
Dielectric Withstanding Voltage 500 volts (VRMS minimum)
RF High Potential 325 volts (VRMS minimum) @ 5 MHz
Impedance 50 ohms nominal
RF Leakage -80dB to 3 GHz, -65dB from 3 to 26.5 dB minimum
Contact Resistance Initial center contact 6.0 milliohms maximum
Outer contact 2.0 milliohms maximum
Mechanical
Durability 100 mating cycles minimum
Radial Misalignment ±0.020 minimum
Axial Misalignment .000/.010
Force to Engage full detent 15.0 lbs. maximum
half detent 10.0 lbs. maximum
smooth bore 2.0 lbs. maximum
Force to Disengage full detent 5.0 lbs. minimum
half detent 2.0 lbs. minimum
smooth bore 0.5 lbs. minimum
Center Contact Retention 1.5 lbs. minimum axial force
Environmental
Operating Temperature -65°C to +165°C
Vibration per mil-std-202, method 204, test condition D
Shock per mil-std-202, method 213, test condition I
Thermal Shock per mil-std-202, method 107, test condition B
Moisture Resistance per MIL-STD-202 method 106, except step 7b shall be omitted. Resistance shall be 200 megohms
within 5 minutes after removal from humidity.
Specifications
Jack
Note: The U.S. Government (DESC) has determined that the above specified
interface dimensions are interchangeable and intermateble with Corning
Gilbert GPO Series RF Connectors.1
1Per DESC drawing numbers 94007 and 94008, series SMP.
3.40
[.132]
Min.
3.43
[.135]
3.20 ± .050
[.125 ± .002]
2.80 ± .050
[.110 ± .002]
Dia.
2.8
[.112]
Min.
8.60 ± .076
[.142 ± .003]Dia.
Dia.
Max.
3.43
[.135]
Dia.
Max.
3.70
[.145]
Dia.
Max.
EMI Ring
Anti-Rock Ring
Full Detent
Bullet Smooth Bore
ShroudInterface Dimensions
GPO is a trademark of Corning Gilbert, Inc.
154
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
Straight Cable Jack, Solder
Attachment
6.40
[.250]
3.40
[.135]
Dia.
Max. 3.40
[.133] Dia.
EMI Ring Anti-Rock Ring
Right-Angle Cable
Jack, Solder Attachment
4.10
[.161]
Max.
3.40
[.135]
Dia.
Max.
5.80
[.230] Max.
Dim.B Dim.A
EMI Ring
Anti-Rock Ring
Jack to Jack Adapter (Bullet)
6.40 / 6.50
[.2525 / .2555]
3.40
[.135]
Dia.
Max.
3.40
[.133] Dia.
Cable Part No.
.047 Semi-Rigid 1056526-1
.085 Semi-Rigid 1056527-1
(RG 405)
Cable Dim. A Dim. B Part No.
.047 Semi-Rigid 4.8 5.8 1056553-1
.190 .230
.085 Semi-Rigid 5.3 6.7 1056554-1
(RG 405) .209 .265
Part No.
1056700-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
155
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
Shroud — Threaded
3.00
[.120] 4.10
[.160]
Dia.
Max.
3.00
[.120]
4.20
[.165]
1.10
[.045]
Dim.D
2 Plcs.
Dim.C
Dim.B Dim.A
Dim.A
Dim.B
Shroud — 2 Hole Flange
Surface Mount
Shroud — Press Fit
Description Dim. A Dim. B Dim. C Dim. D Part No.
12.2 8.3 4.7 2.5
.480 .328 .187 .098 1056721-1
15.8 12.2 5.7 2.6
Full Detent .625 .481 .223 .102 1056722-1
10.2 7.2 4.2 1.9
.400 .282 .165 .073 1056724-1
12.2 8.3 4.7 2.5
Limited Detent .480 .328 .187 .098 1056729-1
10.2 7.2 4.2 1.9
.400 .282 .165 .073 1056731-1
Description Part No.
Full Detent 1056745-1
Limited Detent 1056743-1
Smooth Bore 1056744-1
Description Dim. A Dim. B Part No.
Limited Detent 3.9 2.0 1056736-1
.154 .080
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
156
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMP Microminiature Push-On Coaxial Connectors (Continued)
Glass Bead Assembly
Plug, Straight, Full Detent
Shroud — Solder-In
Hermetic
.400
[.015]
Dia.
1.60
[.063]
3.20
[.125]
2.50
[.099]
3.70
[.145]
Dia.
2.50
[.098]
2.00
[.080]
3.60
[.140] 1.30
[.050]
Dia.
0.40
[.015] Dia.
Description Part No.
Full Detent 1056750-1
Limited Detent 1056751-1
Smooth Bore 1056752-1
Part No.
1056728-1
4.20
[.164]
8.10
[.320]
9.10
[.358]
4.70
[.186] 2.20
[.085]
0.60 ± 0.10
[.024 ± .002]Dia.
0.50 ± 0.10
[.020 ± .002]Dia.
M/A-COM Part
Model Number No.
2965-5006-62 1061692-1
Plug, Right-Angle, Limited
Detent
3.60
[.140]
Ø 0.40
[.015]
Ø 6.90
[.272]
4.60
[.182]
3.80
[.150] Sq. 5.10
[.200] Sq.
0.30
[.010]
1.80
[.072]
OSMP Plug
Full Detent
Ref. Plane
Ø 1.70
[.068]
4 Plcs. Ø 0.80
[.030] 4 Plcs.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
157
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors
RF Coax Connectors
Product Facts
■Interface designed for
multiple interconnects
■For high performance
microwave system
requirements
■Module to module, module
to motherboard, fixed and
float mount
■Bulkhead or panel mount
■For flexible and semi-rigid
cable
OSP miniature connectors
for semi-rigid cable meet
high performance require-
ments for microwave
multiple interconnects.
Standard units are available
in bulkhead or panel mount
designs for either direct
solder or solderless com-
pression crimp attachment.
Complete tooling for both
versions is located in the
Tooling Section of this
catalog.
Jack connectors are avail-
able in either float or rigid
mount. Rigid mount units will
function to specifications up
to ±.10 [.004] radial mis-
alignment with the mating
plug connector. Applications
requiring greater than ±.10
[.004 ] radial misalignment
can use either the float
design or floating connector
plates with guide pins.
The solderless compression
crimp attachment meets
high performance require-
ments for microwave sys-
tem applications. The cable
attachment is permanent
and highly reliable.
Ease of assembly permits
users unskilled in soldering
techniques to rapidly pro-
duce cable assemblies with
consistently excellent
mechanical and electrical
performance.
158
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
RF Coax Connectors
Engineering Data
Impedance — 50 ohms
Frequency — dc to 22.0 GHz
Temperature Rating — -65° to 125° C
Electrical RG 402 (.141) Semi-Rigid RG 405 (.085) Semi-Rigid
VSWR —
dc - 18.0 GHz 1.02 + .005f (GHz) 1.05 + .005f (GHz)
18.0 - 22.0 GHz 1.02 + .008f (GHz) 1.05 + .009f (GHz)
RF Transmission Loss — .03 x √--
f (GHz) .03 x √--
f (GHz)
Insulation Resistance — 5,000 megohms min. 5,000 megohms min.
Contact Resistance —
Center Contact 2.0 milliohms max. 2.0 milliohms max.
Outer Contact 2.0 milliohms max. 2.0 milliohms max.
Outer Contact to Cable 0.5 milliohms max. 0.5 milliohms max.
Dielectric Withstanding Voltage — 1500 volts RMS 1000 volts RMS
Corona Extinction Voltage at 70,000 Ft.— 375 volts min. 335 volts min.
RF High Potential at 5 MHz — 1,000 volts RMS 670 volts RMS
RF Leakage Interface Only — -(90-fGHz) dB min. (fully mated) -(90-fGHz) dB min. (fully mated)
Power Handling — 300W at 3 GHz (sea level) and room temperature
Environmental
Corrosion — Method 101, Condition B, MIL-STD-202
Vibration — Method 204, Condition D, 20G’s, MIL-STD-202
Shock — Method 213, Condition I, 100G’s, MIL-STD-202
Temperature Cycling — Method 107, Condition B, MIL-STD-202
Moisture Resistance — Method 106, MIL-STD-202
Material
Housing — Corrosion resistant steel Type 303 (stainless) per ASTM A484 and A582
Center Contact — Beryllium copper per ASTM-B-196
Dielectric — TFE fluorocarbon per ASTM-D-1457
Gasket (O’Ring) — MIL-P-25732
Mechanical
Force to Engage — 3 pounds max.
Force to Disengage — 1.5 pounds max.
Center Contact Retention — 6 pounds min.
Durablilty — 5,000 Cycles
Radial Misalignment —
Rigid Mount ±.10 [±. 004]
Float Mount ±.51 [±.020]
Mating Characteristics
Jack Connector —
Center Contact Socket Oversize test Pin — .945 + .003 [.0372 + .0001] dia.
Test Pin Finish — 16 micro inch
Insertion Depth — .76/1.14 [.030/.045]
Number of Insertions — 3
Insertion Force Test Pin — .940 + .003 [.0370 + .0001] dia.
Test Pin Finish — 16 micro inch
Insertion Depth — 1.27/1.91 [.050/.075]
Insertion Force — 3 pounds max.
Withdrawal Force Test Pin — .90 + .003 [.0355 - .0001] dia.
Test Pin Finish — 16 micro inch
Insertion Depth — 1.27/1.91 [.050/.075]
Withdrawal — 1 ounce min.
Finish
Center Contact — Gold plate per MIL-G-45204, Type II, Class 1 over copper plate per MIL-C-14550
Housing — Gold plate per MIL-G-45204, Typ II, Class 0 over nickel plate per QQ-N-290, Class 2
or passivate per ASTM-A380
The specifications given
refer specifically to mated
pair of Part Numbers
1059410-1 and 1059402-1
(RG 402) and 1059412-1
and 1059404-1 (RG 405).
Specifications on other con-
nectors are available on
request.
The general electrical,
mechanical and environ-
mental specifications in the
following table are recom-
mended for procurement
documents or drawings.
All dimensions shown are nominal.
Contact the factory for specific
tolerances.
159
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
Interface Mating Dimensions
RF Coax Connectors
The connector interface,
specifically designed for
multiple interconnects, main-
tains reliable performance
over the typical mechanical
tolerance required in cost
effective packaging.
The interface test data
shows excellent perform-
ance is maintained with mat-
ing gaps up to 0.38 [.015].
Meets MIL-STD-348 Figure
321. Intermateable to BMA
Connectors. Jack Plug
Letter Dimensions
A1.78
.070 Nom.
B5.72
.225 Min.
C7.62
.300 Ref.
D5.00
.197 Nom.*
E5.08
.200 Max.
F3.23
.127 Max.*
*With spring bottomed
Letter Dimensions
A1.78
.070 Nom.
B5.33
.210 Nom.
C7.62
.300 Ref.
D5.05
.199 Min.
E0.91
.036 Nom.
F3.25
.128 Min.
160
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment
RF Coax Connectors
Bulkhead Feedthrough
Cable Plug
Rear Mount
A
Dia.
B
Dia.
Hex.
17.5
[.690]
7.9
[.312]
Max.
ed
9.19
[.362]
Dia.
6.1 ± 0.03
[.240 ± .001]
+ 0.03
– .000
+ .001]
– .000
6.1
[.242
Recommended
Mounting Hole
Dia.
Flange Mount Cable Jack
Floating Rear Mount
B Dia.
18.0
[.710]
OSP Jack
14.2
[.560] Dia.
19.1
[.750]
Dia.
2 Holes
A
Dia. + 0.25
– 0.00
+ .010
– .000
9.5
[.375 ]
+ 0.10
– 0.03
+ .004
– .001
2.6
[.102 ]
Dia.
7.1
[.280]
9.5
[.372]
14.2 ± 0.10
[.560 ± .004]
+ 0.05
– 0.03
+ .002]
– .001
9.6
[.377
Recommended
Mounting Hole
Cable Dimensions Part No.
AB
RG 402/U
3.58 3.7 4.6 1059453-1
.141 .144 .180
RG 405/U
2.16 2.3 3.0 1059456-1
.085 .089 .120
Finish: Inner housing that is soldered to cable is gold plated. Outer housing is
passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Bulkhead Feedthrough
Cable Jack Rigid
Rear Mount
A
Dia.
B
Dia.
Hex.
18.0
[.710]
11.1
[.437]
Dia.
6.4
[.250]
Max.
9.19
[.362]
ed
ole
+ 0.03
– .000
+ .001]
– .000
9.1
[.359
11
[.43
Dia.
Recommended
Mounting Hole
Cable Plating Dimensions Part No.
AB
RG 402/U
3.58 Gold 3.7 4.6 1059410-1
.141 .144 .180
RG 405/U
2.16 Gold 2.3 3.0 1059412-1
.085 .089 .120
Cable Plating Dimensions Part No.
AB
RG 402/U
3.58 Gold 3.7 4.6 1059402-1
.141 .144 .180
RG 405/U
2.16 Gold 2.3 3.0 1059404-1
.085 .089 .120
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
161
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment (Continued)
RF Coax Connectors
Dia.
16.2
[.640]
Dia.11.2
[.440] Max.
9.3 ± 0.03
[.365 ± .001]
A
Dia.
B
Dia.
Cable Plating Dimensions Part No.
AB
RG 402/U
3.58 Gold 3.7 4.6 1059505-1
.141 .144 .180
RG 405/U
2.16 Gold 2.3 3.0 1059506-1
.085 .089 .120
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Low Profile — Panel
Feedthrough Cable Jack —
Floating Rear Mount
A Dia.
B
Dia.
18.0
[.710]
Dia.
7.6
[.300]
Cable Plating Dimensions Part No.
AB
RG 402/U
3.58 Gold 3.7 4.6 1059465-1
.141 .144 .180
RG 405/U
2.16 Gold 2.3 3.0 1059467-1
.085 .089 .120
Recommended removal tool part number 1059774-1 is described in the
Tooling Section of this catalog.
When using semi-rigid cable, it is recommended that a service loop be used to
facilitate the float features of the connector.
Panel A ±.003 Panel B ±.003 Stand-Off Panel C +.050/–.000
2.3 9.5 7.2
.090 .375 .285
2.3 11.1 5.6
.090 .438 .222
2.3 12.7 4.1
.090 .500 .160
3.2 9.5 6.4
.125 .375 .250
3.2 11.1 4.7
.125 .438 .187
3.2 12.7 3.2
.125 .500 .125
Low Profile — Bulkhead
Feedthrough Cable Jack —
Floating Rear Mount
Recommended Mounting Detail
Stand-Off C
Panel APanel
B
+ 0.08
– 0.00
+ .003]
– .000
8.6
[.340
+ 0.05
– 0.00
+ .002]
– .000
8.0
[.316
+ 0.00
– 0.13
+ .000]
– .005
1.3
[.050
Panel
B
Dia.
16.2
[.640]
Dia.11.2
[.440] Max.
9.3 ± 0.03
[.365 ± .001]
A
Dia.
B
Dia.
Dia.
+ 0.05
– 0.03
+ .002]
– .001
9.4
[.368
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
162
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Solderless Compression Crimp Attachment
RF Coax Connectors
Bulkhead Feedthrough
Cable Plug
Fixed Rear Mount
Dia. Hex.
Dia.
B
7.9
[.312]
5.5
[.218] Max.
9.19
[.362]
6.1 ± 0.03
[.240 ± .001]
A
Dia.
d
+ 0.03
– .000
+ .001]
– .000
6.1
[.242 Dia.
Recommended
Mounting Hole
Flange Mount Cable Jack
Floating Rear Mount
B
Dia.
9.7
[.380]
14.2
[.560]
Dia.
9.5
[.372] Dia.
5.5
[.218]
Dia.
19.1
[.750]
Dia.
2 Plcs.
2.6
[.102]
A
Dia.
Dia.
7.1
[.280]
9.5
[.372
14.2 ± 0.10
[.560 ± .004]
+ 0.05
– 0.03
+ .002]
– .001
9.6
[.377
Recommended
Mounting Hole
Bulkhead Feedthrough
Cable Jack
Fixed Rear Mount
Hex.
B
11.1
[.437]
Dia.
6.4
[.250]
Dia.
5.5
[.218] Max.
12.7
[.500]
A
Dia.
d
+ 0.03
– .000
+ .001]
– .000
9.1
[.359
11
[.43
Dia.
Recommended
Mounting Hole
Dim. B
Cable Plating Dim. A Before After Part No.
Crimping Crimping
RG 405/U Passivated
2.16 Stainless 2.2 19.8 17.2 1059399-1
.085 Steel .088 .782 .677
Outline drawing shows after crimp dimensions.
Dim. B
Cable Plating Dim. A Before After Part No.
Crimping Crimping
RG 402/U Passivated
3.58 Stainless 3.6 21.1 18.2 1059408-1
.141 Steel .143 .830 .715
Outline drawing shows after crimp dimensions.
Dim. B
Cable Plating Dim. A Before After Part No.
Crimping Crimping
RG 402/U Passivated
3.58 Stainless 3.6 22.6 19.8 1059451-1
.141 Steel .143 .891 .780
RG 405/U Passivated
2.16 Stainless 2.2 22.6 19.8 1059452-1
.085 Steel .088 .891 .780
Outline drawing shows after crimp dimensions.
When using semi-rigid cable, it is recommended that a service loop be used to facilitate the float features of the connector.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
163
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
OSP Miniature Modular Blind Mate Connectors (Continued)
For Flexible Cable, Crimp Attachment
RF Coax Connectors
Bulkhead Feedthrough
Cable Plug
Rear Mount
Max.
34.9
[1.375]
Ref.
21.2
[.833]
11.4
[.447]
Dia.
6.9 ± 0.03
[.240 ± .001]
ded
Hole
+ 0.03
– .000
+ .001]
– .000
6.1
[.242
11
[.44
Dia.
6.9 ±
[.240
Recommended
Mounting Hole
Flange Mount Cable Jack
Floating Rear Mount
Dia.
9.5
[.372]
Dia.
21.7
[.875] Ref.
35.6
[1.400] Max.
2.6
[.102]
Dia.
2 Plcs.
19.1
[.750]
Dia.
14.2
[.560]
9.5
[.375]
7.1
[.280]
14.2 ± .102
[.560 ± .004]
+ .051
– .025
+ .002]
– .001
9.6
[.377 Dia.
9.5
[.372
Dia
Recommended
Mounting Hole
Bulkhead Feedthrough
Cable Jack
Rigid Rear Mount
Max.
35.6
[1.400]
Ref.
21.7
[.855]
6.4
[.250]
Dia.
9.1 ± 0.03
[.357 ± .001]
+ 0.03
– .000
+ .001]
– .000
9.1
[.359 Dia.
Recommended
Mounting Hole
Cable Plating Part No.
RG 174/U, 179,
187, 188, 316 Passivated Stainless Steel 1059523-1
Cable Plating Part No.
RG 55/U, Passivated Stainless Steel 1059540-1
142, 223, 400
RG 174/U, 179, Passivated Stainless Steel 1059541-1
187, 188, 316
RG 178, Passivated Stainless Steel 1058572-1
Double Braid
Cable Plating Part No.
RG 55/U,
142, 223, 400 Passivated Stainless Steel 1059525-1
Low Profile — Panel
Feedthrough Cable Jack —
Rear Mount
7.6
[.300]
Dia.
35.6
[1.400]
22.3
[.878]
Max.
Ref.
Dia.
+ 0.05
– 0.03
+ .002]
– .001
9.4
[.368
Recommended
Mounting Hole
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
Cable Plating Part No.
RG 174/U, 179, Passivated Stainless Steel 1059551-1
187, 188, 316
Refer to Recommended Mounting Hole Detail for Semi-Rigid Cable Low
Profile Feedthrough Cable Jack.
Recommended removal tool part number 1059774-1 as described in the
Tooling Section of this catalog.
164
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Panel Mount
Straight Terminal
2-Hole Flange Mount Plug
Receptacle
22.3
[.878]
8.4
[.330]
9.9
[.390]
1.7
[.065]
6.4
[.250]
4.1
[.162]
1.3
.050 Dia.
Dia.
Dia.
15.9
[.625]
12.2
[.481]
6.6
[.260]
2.6
[.102] Dia.
2 Plcs.
4-Hole Flange Mount Plug
Receptacle
Dia.
6.4
[.250]
22.3
[.878]
Dia.
2 Plcs.
2.6
[.102]
Sq.
12.7
[.500] Typ.
8.6
[.340]
Dia.
1.3
[.050]
Dia.
4.1
[.162]
2-Hole Flange Mount Jack
Receptacle
7.6
[.300]
12.2
[.481]
Dia.
1.3
[.050]
27.4
[1.080]
Dia.
4.1
[.162]
15.9
[.625]
Dia.
2 Plcs.
2.6
[.102]
Plating Part No.
Passivated
Stainless 1059566-1
Steel
Plating Part No.
Passivated
Stainless 1059596-1
Steel
Plating Part No.
Passivated
Stainless 1059563-1
Steel
Plating Part No.
Passivated
Stainless 1059594-1
Steel
4-Hole Flange Mount Jack
Receptacle
27.4
[1.080]
Dia.
2 Plcs.
2.6
[.102]
Sq.
12.7
[.500] Typ.
8.6
[.340]
Dia.
1.3
[.050]
Dia.
4.1
[.162]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
165
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Panel Mount (Continued)
Straight Terminal
Threaded Installation —
Panel Feedthrough Plug
Receptacle
10.4
[.410] 6.4
[.250]
Dia.
0.5
[.020] Dia.
1.6
[.064]
Dia.
Dia.
5.3
[.210]
5.5 ± 0.03
[.218 ± .001]
5.3 ± 0.05
[.210 ± .002]
Dia.
Panel
1.7 ± 0.03
[.066 ± .001]
Recommended
Mounting Hole
Threaded Installation —
Panel Feedthrough Jack
Receptacle
10.4
[.410] 6.4
[.250]
Dia.
0.5
[.020] Dia.
1.6
[.064]
Dia.
Dia.
5.3
[.210]
5.5 ± 0.03
[.218 ± .001]
5.3 ± 0.05
[.210 ± .002]
Dia.
Panel
1.7 ± 0.03
[.066 ± .001]
Recommended
Mounting Hole
Plating Part No.
Passivated
Stainless 1059617-1
Steel
Plating Part No.
Passivated
Stainless 1059657-1
Steel
Plating Part No.
Passivated
Stainless 1059651-1
Steel
Plating Part No.
Passivated
Stainless 1059654-1
Steel
6.4
[.250]
7.92
[.312]
Dia.
7.6
[.300]
Dia. Dia.
0.5
[.020]
6.4 ± 0.03
[.250 ± .001]
+ 0.05
– .000
+ .002]
– .000
6.4
[.253 Dia.
Dia.
1.2 ± 0.03
[.046 ± .001]Dia.
+ .000
– 0.05
+ .000]
– .002
6.3
[.248 Dia.
Recommended
Mounting Hole
Press Fit Installation —
Panel Feedthrough Jack
Receptacle
Press Fit Installation —
Panel Feedthrough Plug
Receptacle
6.4
[.250]
Dia.
7.6
[.300]
Dia.
0.5
[.020]
6.4 ± 0.03
[.250 ± .001]
+ 0.05
– .000
+ .002]
– .000
6.4
[.253 Dia.
Dia.
1.2 ± 0.03
[.046 ± .001]Dia.
+ .000
– 0.05
+ .000]
– .002
6.3
[.248 Dia.
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
166
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Printed Circuit Board Mount
Straight Plug Receptacle —
Captured Contact
Dia.
1.3
[.050]
12.7
[.500]
6.4
[.250]
Sq.
Sq.
4 Plcs.
1.0
[.040]
5.1
[.200]
Typ.
5.1
[.200]
Typ.
+ 0.08
– .000
+ .003]
– .000
1.7
[.067 Dia.
Hole Typ.
Recommended
Mounting Hole
Plating Part No.
Gold 1059684-1
Plating Part No.
Gold 1059681-1
Plating Part No.
Gold 1059691-1
Straight Jack Receptacle —
Captured Contact
Dia.
Dia.
1.3
[.050]
13.5
[.530]
9.5
[.375]
Sq.
4 Plcs.
1.0
[.040]
5.1
[.200]
Typ.
5.1
[.200]
Typ.
+ 0.08
– .000
+ .003]
– .000
1.7
[.067 Dia.
Hole Typ.
Recommended
Mounting Hole
Right-Angle Plug
Receptacle —
Captured Contact
Surface Mount
Vertical Plug with
Small Leg
Dia.
Sq.
1.3
[.050]
13.5
[.530]
6.4
[.250]
15.0
[.590]
Sq.
4 Plcs.
1.0
[.040]
5.1
[.200]
Typ.
5.1
[.200]
Typ.
+ 0.08
– .000
+ .003]
– .000
1.7
[.067 Dia.
Hole Typ.
Recommended
Mounting Hole
Plating Part No.
Gold 1253111-1
Dia.
OSP
Plug
Sq.
1.3
[.050]
9.4
[.372]
O-Ring 6.4
[.250]
Sq.
4 Plcs.
1.6
[.062]
4.5
[.178]
Typ.
4.5
[.178]
Typ.
+ 0.08
– .000
+ .003]
– .000
1.7
[.067 Dia.
+ 0.08
– .000
+ .003]
– .000
2.5
[.098
Dia. Hole
Typ.
4 Plcs.
Recommended
Mounting Hole
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
167
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal-To-Metal
Rigid Gasket Seal —
Panel Feedthrough
Plug Receptacle
Field Replaceable
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
10.4
[.410]
0.5
[.020] Dia.
Rigid
Gasket
5.3
[.210] Dia.
1.6
[.064]
Dia.
9.9
[.390]
5.3
[.210] Dia. Dia.
Dia.
Glass Seal
5.6 ± 0.13
[.220 ± .005]
0.5 ± 0.03
[.020 ± .001]
+ 0.05
– 0.03
+ .002]
– .001
4.0
[.158
Rigid Gasket Seal —
Panel Feedthrough
Jack Receptacle
11.2
[.450]
0.5
[.020]Dia.
1.6
[.064]
Dia.
5.3
[.210] Dia.
Rigid
Gasket
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.04 + .009f –(90-fGHz) Passivated stainless steel 6059632-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, pg 168.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.04 + .009f –(90-fGHz) Passivated stainless steel 6059665-1
Installation Thermal Limit: 250°C.
Recommended Mounting Hole Detail A follows, pg 168.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(90-fGHz) Passivated stainless steel 1059637-1
Recommended Mounting Detail B or E follows, pg 168.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
168
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSP Miniature Modular Blind Mate Connectors (Continued)
Hermetically Sealed (Continued)
Field Replaceable
Solder and Braze-In
(Continued)
Panel Feedthrough Jack
Receptacle
Recommended
Mounting Hole Detail
10.7
[.421]
Dia.
Dia.
5.6 ± 0.13
[.220 ± .005]
0.5 ± 0.03
[.020 ± .001]
+ 0.05
– 0.03
+ .002]
– .001
4.0
[.158
Glass Seal
Dia. Dia.
5.5 ± 0.03
[.218 ± .001]1.7 ± 0.03
[.066 ± .001]
6.4
[.250]
Ref.
Panel
2-Hole Flange Mount Plug
Receptacle With EMI/RFI
Gasket — 0.5 [.018] Dia.
Contact
Detail A*
Dia.
5.5 ± 0.03
[.218 ± .001]
Ref. Panel
6.4 ± 0.08
[.250 ± .003]
Dia.
+ .000
– 0.05
+ .000
– .002
4.1
.162 ]
[
Detail B* (6.35 [.250] Panel Thickness)
2.6 ± 0.03
[.102 ± .001]
Dia.
3.2 ± 0.13
[.125 ± .005]
Panel
12.2
[.481]
Ref.
Detail C*
2.9 ± 0.03
[.115 ± .001]
Dia.
3.2 ± 0.13
[.125 ± .005]
Panel
12.2
[.481]
Ref.
Detail D*
Dia.
5.5 ± 0.03
[.218 ± .001]
3.2 ± 0.03
[.125 ± .001]
Ref. Panel
7.6 ± 0.08
[.300 ± .003]
Dia.
+ .000
– 0.03
+ .000
– .001
4.1
.162 ]
[
Detail E*
9.5
[.375]
6.4
[.250] Dia. Dia.
Dia.
8.0 ± 0.13
[.315 ± .005]0.5 ± 0.03
[.018 ± .001]
+ 0.05
– 0.03
+ .002]
– .001
2.8
[.112
6.6
[.260]
12.2
[.481]
15.9
[.625]
Dia.
2 Plcs.
2.6
[.102]
*Consult appropriate Instruction Sheet for complete mounting details.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(90-fGHz) Passivated stainless steel 1059671-1
Recommended Mounting Detail B or E follows at bottom of this page.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(90-fGHz) Passivated stainless steel 1059572-1
Recommended Mounting Detail D follows at bottom of this page.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
169
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors
Engineering Data
Impedance — 50 ohms
Frequency — dc to 28.0 GHz
Temperature Rating — -65° to 125° C
Electrical RG 405 (.085) Semi-Rigid
VSWR — 1.05 + .01f (GHz)
RF Transmission Loss — .040 x √--
f (GHz)
Insulation Resistance — 5,000 megohms min.
Contact Resistance —
Center Contact 6.0 milliohms max.
Outer Contact 3.0 milliohms max.
Outer Contact to Cable 0.5 milliohms max.
Dielectric Withstanding Voltage — 675 volts RMS
Corona Extinction Voltage at 70,000 Ft.— 250 volts min.
RF High Potential at 5 MHz — 675 volts RMS
RF Leakage Interface Only — -(90-fGHz) dB min. (fully mated)
Power Handling — 300W at 3 GHz (sea level) and room
temperature
Environmental
Corrosion — Method 101, Condition B, MIL-STD-202
Vibration — Method 204, Condition D, 20G’s, MIL-STD-202
Shock — Method 213, Condition I, 100G’s, MIL-STD-202
Temperature Cycling — Method 107, Condition B, MIL-STD-202
Moisture Resistance — Method 106, MIL-STD-202
Material
Housing — Corrosion resistant steel Type 303 (stainless) per
ASTM A484 and A582
Center Contact — Beryllium copper per ASTM-B-196
Dielectric — TFE fluorocarbon per ASTM-D-1457
Gasket (O’Ring) — MIL-P-25732
Mechanical
Force to Engage — 3 pounds max.
Force to Disengage — 1.5 pounds max.
Center Contact Retention — 4 pounds min.
Durablilty — 1,000 Cycles
Radial Misalignment —
Rigid Mount ±.06 [±.0025]
Float Mount ±.51 [±.020]
Mating Characteristics
Jack Connector —
Center Contact Socket Oversize test Pin — .533 + .003 [.0210 + .0001] dia.
Test Pin Finish — 16 micro inch max.
Insertion Depth — .76/1.14 [.030/.045]
Number of Insertions — 3
Insertion Force Test Pin — .528 + .003 [.0208 + .0001] dia.
Test Pin Finish — 16 micro inch
Insertion Force — 3 pounds max.
Withdrawal Force Test Pin — .495 + .003 [.0195 - .0001] dia.
Test Pin Finish — 16 micro inch max.
Insertion Depth — 1.27/1.91 [.050/.075]
Withdrawal — 1/2 ounce min.
Finish
Center Contact — Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Housing — Gold plate per MIL-G-45204, Type II, Class 0 over nickel
plate per QQ-N-290, Class 2 or passivate per ASTM-A380
Product Facts
■Subminiature version of
OSP Blind Mate Connectors
■For space savings
■Family of connectors and
adapters
OSSP connectors are a sub-
miniature version of the OSP
blind mate series.
Connectors in this series
incorporate the design ele-
ments of the OSP interface
including the float and mis-
mate features. OSSP blind
mates are about 40%
smaller than OSP connec-
tors and are designed to be
used in applications where
space is at a premium.
A complete family of OSSP
connectors and adapters is
available including cable
connectors, fixed and float
mount panel connectors
and hermetic connectors.
Rigid mount units will func-
tion to specifications up to
±.064 [±.0025] radial mis-
alignment with the mating
plug connector.
Applications requiring
greater than ±.064 [±.0025]
radial misalignment can use
either the float design or
floating connector plates
with guide pins.
170
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Interface Mating
Dimensions
The connector interface,
specifically designed for
multiple interconnects,
maintains reliable perform-
ance over the typical
mechanical tolerance
required in cost effective
packaging.
The interface test data
shows excellent perform-
ance is maintained with mat-
ing gaps up to .015 inch.
Jack Plug
Dimensions
Description ABCDEF
Jack 1.22 Nom. 3.91 Min. 5.33 Ref. 5.00 Nom.* 3.35 Max. 3.23 Max.*
0.48 .154 .210 .197 .132 .127
Plug 1.22 Nom. 3.56 Nom. 5.33 Ref. 5.00 Min. 0.51 Nom. 3.25 Min.
0.48 .140 .210 .199 .020 .128
*With spring bottomed.
171
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Semi-Rigid Cable, Direct Solder Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
Dia.
17.5
[.690]
3.0
[.120]
Dia. Min.
2.3
[.089]
Max.
7.3
[.289]
Dia.
4.6 ± 0.03
[.180 ± .001]
d
e
+ 0.03
– .000
+ .001
– .000
4.6
.182
Dia.
[.
[ ]
Recommended
Mounting Hole
Cable Plating Part No.
RG 405/U,
2.16 Gold 1059857-1
[.085]
Cable Part No.
RG 405/U,
2.16 1059868-1
[.085]
Finish: Inner housing that is soldered to cable is gold plated. Outer housing
is passivated stainless steel.
When using semi-rigid cable, it is recommended that a service loop be used
to facilitate the float features of the connector.
Cable Part No.
RG 405/U,
2.16 1059874-1
[.085]
Flange Mount Cable Jack —
Floating Rear Mount
Feedthrough Snap-In
Dia.
18.0
[.710]
3.0
[.120]
7.6
[.300]
11.0
[.435]
Dia.
14.7
[.580]
Dia.
2 Plcs.
Dia.
2.3
[.089]
Dia.
2.4
[.093]
+ 0.08
– 0.00
+ .003
– .000
7.1
[.281 ]
Dia.
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280 ]
ded
ole
Dia.
5.5
[.217]
11.0 ± 0.10
[.435 ± .004]
+ 0.08
– 0.00
+ .003
– .000
7.1
[.281 ]
Dia.
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280 ]
Recommended
Mounting Hole
Dia.
11.4
[.450] Ref.
7.6
[.300]
Dia.
Max.
3.0
[.120] Dia.
6.1
[.240] Dia.
Compression
Spring
Connector
Retaining Clip
Recommended
Mountin
g
Hole
+ 0.08
– 0.00
+ .003
– .000
7.1
[.280 ]
+ 0.05
– 0.00
+ .002
– .000
6.5
[.256 ]
12.7
[.500] Ref. 18.0
[.710]
14.7
[.570]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
172
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Flexible Cable, Crimp Attachment
Bulkhead Feedthrough
Cable Plug — Rear Mount
Ref.
33.0
[1.298]
Dia.
4.6 ± 0.03
[.180 ± .001]
d
+ 0.03
– .000
+ .001
– .000
4.6
[.182 Dia.
4
[.1
Recommended
Mounting Hole
]
Cable Plating Part No.
RG 188/U,
316 Double Passivated Stainless Steel 1059884-1
Braided Only
RG 174/U,
188/U, 316U Passivated Stainless Steel 1059886-1
Flange Mount
Cable Jack —
Floating Rear Mount
Dia.
35.6
[1.40]
Max.
7.6
[.300]
11.0
[.435]
Dia.
14.7
[.580]
Dia.
2 Plcs.
2.4
[.093]
+ 0.08
– 0.00
+ .003
– .000
.1
81 ]
Dia.
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280 ]
Dia.
5.5
[.217]
11.0 ± 0.10
[.435 ± .004]
+ 0.08
– 0.00
+ .003
– .000
7.1
[.281
Recommended
Mounting Hole
]
D
+ 0.00
– 0.05
+ .000
– .002
7.1
[.280 ]
Cable Plating Part No.
RG 188/U,
316 Double Passivated Stainless Steel 1059888-1
Braided Only
RG 174/U,
188/U, 316U Passivated Stainless Steel 1059887-1
Feedthrough Snap-In
Cable Jack
Part No.
1059889-1
35.6
[1.400] Max.
Dia.
6.1
[.240]
22.4 ± 0.38
[.880 ± .015]
Dia.
Mounting Hole
+ 0.05
– 0.00
+ .002
– .000
6.5
[.256 ]
Dia.
Mounting Hole
+ 0.08
– 0.00
+ .003
– .000
7.1
[.280 ]
Compression
S
p
rin
g
OSSP
Jack Connector
Retaining Clip
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
173
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Panel Mount
Press-Fit Panel
Feedthrough Plug
Receptacle
Part No.
1059901-1
Ø 4.0 ± 0.03
[.156 ± .001]
Straight Knurl
O-Ring
Recommended
Mounting Hole
+ 0.08
– 0.00
+ .003
– .000
Ø 4.0
[.159 ]
+ 0.00
– 0.05
+ .000
– .002
Ø 3.9
[.154 ]
+ 0.05
– 0.00
+ .002
– .000
11.4
[.450 ]
6.4
[.250]
5.1
[.200]
5.3 ± 0.05
[.210 ± .002]
OSSP
Plug Ø 0.9 ± 0.03
[.034 ± .001]
Ø 0.4 ± 0.03
[.015 ± .001]
Threaded Panel
Feedthrough Plug
Receptacle, Straight
Terminal
11.4
[.450] 6.4
[.250]
Dia.
0.4
[.015]
Dia.
1.2
[.049]
Dia. Dia.
4.0
[.156]
4.1 ± 0.03
[.162 ± .001]
5.3 ± 0.05
[.210 ± .002]
Dia.
1.3 ± 0.03
[.051 ± .001]
Recommended
Mounting Hole
Plating Part No.
Passivated
Stainless 1059903-1
Steel
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
174
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Straight Plug Receptacle —
Captured Contact
Part No.
1059919-1
O-Ring
Mounting
Surface
Recommended
Mounting Hole
5 Plcs.
Hol
e
Typ.
Typ.
+ 0.08
– 0.00
+ .003
– .000
Ø 1.7
[.067 ]
5.1
[.200]
4 Plcs.
Sq.
Typ.
1.0
[.040]
8.7
[.343]
12.6
[.498]
OSSP
Plug
5.1
[.200]
5.1
[.200]
6.4
[.250]
Sq.
Ø 0.9
[.034]
Right-Angle
Plug Receptacle
Part Number
1484546-1
O-Ring
Recommended
Mounting Hole
5 Plcs.
Hol
e
Typ.
Typ.
+ 0.08
– 0.00
+ .003
– .000
Ø 1.7
[.067 ]
5.08
[.200]
4 Plcs.
Sq.
1.02
[.040]
5.08 ± 0.51
[.200 ± .020]
5.11 ± 0.03
[
.201 ± .001
]
17.78 ± 0.25
[.700 ± .010]
5.84
[.230] 5.08
[.200]
Typ.
5.08
[.200]
6.35
[.250]
Sq.
Ø 0.86
[.034]
14.61
[.575]
OSSP Subminiature Modular Blind Mate Connectors (Continued)
For Printed Circuit Board Mount
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
OSSP Subminiature Modular Blind Mate Connectors (Continued)
Hermetically Sealed
Metal to Metal
Formable Gasket —
Panel Feedthrough Plug
Receptacle
12.1
[.475]
1.0
[.039]Dia. 3.0
[.118]Dia.
3.6
[.140]Dia.
.03
[.012] Dia.
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(85-fGHz) Gold 1059905-1
Recommended Mounting Hole Detail A at bottom of this page.
Solder and Braze-In
Panel Feedthrough Plug
Receptacle
8.2
[.322]
Ref.
5.3
[.210]Dia.
Dia.
Dia.
+ 0.00
– 0.05
+ .000
– .002
4.8
[.189 ]
0.5 ± 0.03
[.020 ± .001]
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(85-fGHz) Gold 1059902-1
Recommended Mounting Hole Detail B at bottom of this page.
Field Replaceable
Solder and Braze-In
2-Hole Flange Mount
Plug Receptacle With
EMI/RFI Gasket
Recommended
Mounting Hole Detail for
Hermetically Sealed
9.5
[.375]
5.3
[.210] Dia. Dia. Dia.
8.2 ± 0.13
[.322 ± .005]
0.3 ± 0.03
[.012 ± .001]
Dia.
+ 0.05
– 0.03
+ .002]
– .001
1.9
[.076
5.7
[.223]
9.0
[.353]
12.2
[.480]
Dia.
2 Plcs.
2.4
[.093]
VSWR RF Leakage Plating Part No.
(GHz) (dB)
1.06 + .01f –(85-fGHz) Passivated Stainless Steel 1059894-1
Recommended Mounting Hole Detail C at bottom of this page.
Dia.
3.2 ± 0.03
[.121 ± .001]
Ref.
Dia.
+ .003
– 0.05
+ .001
– .002
4.1
[.162 ]
Dia.
+ .000
– 0.03
+ .000
– .001
1.0
[.041 ]
6.4
[.250]
Detail A*
2.5
[.100]
R 0.08
[.003] Max.
+ 0.03
– 0.00
+ .001
– .000
Ø 4.8
[.190 ]
+ 0.08
– 0.00
+ .003
– .000
0.8
[.031 ]
+ 0.08
– 0.03
+ .003
– .001
R 0.13
[.005 ]
+ 0.05
– 0.03
+ .002
– .001
Ø 5.5
[.218
]
Detail B* Detail C*
*Consult appropriate Instruction Sheet for complete mounting procedure.
2.0 ± 0.03
[.078 ± .001]
Dia.
3.2 ± 0.13
[.125 ± .005]
Panel
9.0
[.353]
Ref.
175
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
176
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors
Product Facts
■SMB offers snap-fit coupling
for quick connect/disconnect
■Choice of Commercial or
High Rel Connectors
■50 and 75 ΩMIL-Type
connectors available
■Straight plugs and jacks are
completely crimp terminated
■Fast easy cable assembly
■Low VSWR
■Standard military, commer-
cial or Tyco Electronics
tooling
■Listed under the Component
Program of Underwriters
Laboratories Inc.,
File No. E81956
■PC Board soldered connec-
tors are recognized under
the Component Program of
Underwriters
Laboratories Inc.,
File No. E81956
■Certified by Canadian
Standards
Association
File No. LR 7189
R
R
R
SMB Connectors are avail-
able in commercial and
high rel versions. They are
ideally suited for circuit
miniaturization and are
offered in a wide range of
configurations including
plugs, right-angle plugs,
jacks, bulkhead jacks and
adapters, as well as printed
circuit board and solder
jacks.
Termination costs are kept
to a minimum using plugs
and jacks with a crimp cen-
ter contact and hex crimp
outer braid. Both hand held
tooling and pneumatic
bench-mounted tooling is
available. Easily assembled
right-angle plugs have a
hex crimp on the outer
braid ferrule and bifurcated
solder center contacts.
Tyco Electronics’ 75 Ohm BT
43 SMB Connectors feature
unique spring mating with
snap-fit couplings for quick
connect/disconnect. These
connectors are designed
to be intermateable with
75 Ohm SMB MIL-C-39012
connectors. They also fea-
ture reliable dual crimp
cable terminations.
Packaging —All connectors are
packaged individually unless otherwise
noted under the “Military No. and/or
Comments” column in the connector
specifications chart.
Between Series Adapters
For SMB Between Series Adapters,
please see pages 251-260.
SMB Connector Specifications
Electrical Characteristics
Impedance — 50 ohms and 75 ohms, nominal
Frequency Range — 0 to 4.0 GHz
Voltage Rating (VRMS) —Sea Level 70,000 Feet
50 ohm connectors for RG 178/U series cable 300 75
50 ohm connectors for RG 316/U series cable 400 100
75 ohm connectors for RG 179/U series cable 300 75
75 ohm connectors for RG 195/U series cable 500 125
Insulations Resistance — 1000 megohms min.
Contact Resistance — (milliohms max.) After
Initial Environment
Center contact 6.0 8.0
Outer contact 1.0 1.5
Braid to body 1.0 N/A
Contact Current Rating — 1.5 amps DC max.
Voltage Standing Wave Ratio (VSWR0 —
to 4.0 GHz or 80% of upper cutoff frequency of the cable, whichever is lower.
Mating Engagement
Cable Straight Right-Angle
RG 178/U Series 1.30 + .04F 1.45 + .06F
RG 316/U Series 1.25 + .04F 1.35 + .04F
F=GHz, does not apply to 75 ohm connectors.
RF High Potential Withstanding Voltage
Frequency — 5 MHZ
Leakage Current — N/A
50 ohm connectors for RG 178/U series cable 675 VRMS
50 ohm connectors for RG 316/U series cable 950 VRMS
75 ohm connectors for RG 179/U series cable 950 VRMS
75 ohm connectors for RG 195/U series cable 1225 VRMS
RF Leakage — –55 dB min. at 2-3 GHz
Insertion Loss — .30dB max. at 3 GHz
Mechanical Characteristics
Engagement Forces — 14 lbs. [62.3 N] maximum engagement initially.
After 500 matings, 14 lbs. [62.3 N] maximum engagement and 2 lbs. [8.8 N] minimum
disengagement for all of SMBs.
Cable Attachment —
Straight Connectors — Crimp, both center contact and braid
Right-Angle Connectors — Crimp on braid and bifurcated solder center contact
Durability — 500 cycles per MIL-C-39012
Contact Captivation — When captivated, the contacts will withstand 4.0 lbs.
minimum axial force.
Cable Retention — When properly assembled to the compatible braided coaxial
cable, the retention is equal to the breaking strength of the cable.
Marking — Per MIL-STD-130
Environmental Characteristics
Temperature Rating — –65°C to +165°C
Corrosion (salt spray) — MIL-STD-202, Method 101, test condition B, 5% salt
solution
Vibration High Frequency — MIL-STD-202, Method 204, test condition B
(15 G’s)
Shock — MIL-STD-202, Method 213, test condition B, 75 G’s at 6 milliseconds, 1⁄2
sine
Thermal Shock — MIL-STD-202, Method 107, test condition B, except high tem-
perature shall be +85°C. High temperature shall be +200°C for connectors using
200°C cables.
Moisture Resistance — MIL-STD-202, Method 106, when interface gasket is
used. No measurements of high humidity. Insulation resistance shall be 200
megohms minimum within five minutes after removal from humidity.
Durability Test — Conducted per MIL-C-39012 Reg. Para. 3.15, Method Para. 4.6.12
Materials
Body, Body Components and Male Contacts — Brass, half hard, per QQ-B-626,
Alloy 360, Zinc per QQ-Z-363
Female Contacts — Beryllium copper per QQ-C-530, heat treated per MIL-H-7199
Insulators — TFE fluorocarbon per ASTM D 1710, Type 1, Grade 1
Lockwashers — Phosphor bronze per QQ-B-750
Crimp Ferrule — Annealed copper alloy per WW-T-799
Gaskets — Silicone rubber per ZZ-R-765, Class 11B, Grade 65-75
Plating
Center Contacts — 0.00127 [.000050] min. Gold per MIL-G-452048 Type 1,
Grade C, Class 1, over 0.00254 [.000100] min. nickel per QQ-N-290
Other Metal Parts — Gold, Nickel or Solder plated to meet the Finish and
Corrosion requirements of MIL-C-39012
177
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
178
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm
Straight Plugs
Right-Angle Plugs
6.35
[.250] Dia.
6.35
[.250] Max.
21.10
[.830] Max.
13.21
[.520]
Max.
13.71
[.540]
Max.
6.35
[.250] Dia.
13.71
[.540] Max.
13.21
[.520] Max.
Die CastMIL Type
RG/U Center Outer Other Part
Cable Contact Contact Metal Parts Dielectric Style No.
Plating Plating Plating
178, 178A, 178B,
196, 196A Gold Gold Nickel TEFLON MIL Type 413985-6
Gold Gold Gold TEFLON MIL Type 413985-1
Gold Gold Nickel TEFLON MIL Type 413985-3
174, 316, Gold Nickel Nickel TEFLON MIL Type 413985-7
188, 188A Gold Gold Nickel TEFLON Die Cast 414946-1
Gold Nickel Nickel TEFLON Die Cast 5414946-2
179, 179A, 179B, Gold Gold Nickel TEFLON MIL Type 1-413985-1
161, 187, 187A, Gold Gold Nickel TEFLON Die Cast 5414946-5
BELDEN 9221 Gold Nickel Nickel TEFLON Die Cast 5414946-6
Gold Gold Gold TEFLON MIL Type 413985-2
RG 316, Gold Gold Nickel TEFLON MIL Type 413985-4
188 Double Braid Gold Gold Nickel TEFLON Die Cast 5414946-3
Gold Nickel Nickel TEFLON MIL Type 413985-8
RG/U Center Outer Other Part
Cable Contact Contact Metal Parts Dielectric Style No.
Plating Plating Plating
Gold Gold Gold TEFLON MIL Type 414002-7
178, 178A, 178B, Gold Gold Nickel TEFLON MIL Type 414002-8
196, 196A Gold Gold Nickel TEFLON Die Cast 5414363-8
Gold Gold Gold TEFLON MIL Type 414002-1
174, 316, 188, 188A Gold Gold Nickel TEFLON MIL Type 414002-3
179, 179A, 179B Gold Nickel Nickel TEFLON MIL Type 414002-5
161, 187, 187A Gold Gold Nickel TEFLON Die Cast 5414363-3
BELDEN 9221 Gold Nickel Nickel TEFLON Die Cast 5414363-5
Gold Gold Gold TEFLON MIL Type 414002-2
RG 316, Gold Gold Nickel TEFLON MIL Type 414002-4
188 Double Braid Gold Gold Nickel TEFLON Die Cast 5414363-4
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
SMB Connectors, 50 Ohm (Continued)
Straight Jacks
Bulkhead Jack
Adapter
(Jack-Jack)
Commercial Jack
Die Cast
Brass
5.56
[.219] Hex.
5/4.88 Dia.
[.197/.192]
2.08/2.01
[.082/.079]
Maximum Panel Thickness 2.36 [.093]
Recommended Panel Cutout
for Bulkhead Jack and Adapter
25.40
[1.000]
6.35
[.250] Hex.
17.53
[.690] Max.
RG/U Center Body Jack
Cable Contact Plating Dielectric Style Part No.
Plating
178, 178A, 178B, 196, 196A Gold Nickel TEFLON MIL Type 5414170-2
174, 316, Gold Nickel TEFLON MIL Type 5414170-1
188, 188A Gold Nickel TEFLON Die Cast 414948-1
RD 316, 188 Double Braid Gold Nickel TEFLON Commercial 414948-3
Center
Type Contact Body Dielectric Style Part No.
Plating Plating
Gold Nickel TEFLON MIL Type 228553-1
Jack-To-Jack Gold Gold TEFLON MIL Type 228553-2
MIL Type Jack
Bulkhead Jacks
6.35
[.250 ] Hex.
28.60
[1.120]
Center Bulkhead
RG/U Contact Body Jack.
Cable Plating Plating Dielectric Style Part No.
174, 316, Gold Nickel TEFLON Commercial 5415006-1
188,188A Gold Nickel TEFLON Commercial 5228217-1
RD 316, 188 Double Braid Gold Nickel TEFLON Commercial 5415006-2
179
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
180
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
PC Board
Vertical Jacks
PC Board
Vertical Plugs
A
B
Jacks
Center Body Dim. Dim. Part
Type Contact Dielectric Style
Plating Plating A B No.
7.62 3.94
–– Gold Gold .300 .155 TEFLON MIL Type 413990-1
7.62 3.94
–– Gold Nickel .300 .155 TEFLON MIL Type 413990-2
10.16 2.54 TEFLON MIL Type 414612-2
–– Gold Nickel .400 .100
Gold Tin 3.94 8.25 TEFLON Brass, 5221111-1
–– .155 .325 Max. Stamped
Plugs
Center Body Dim. Dim. Recommended Part
Type Contact Dielectric PC Board Style
Plating Plating A B Layout No.
Low Profile (Plug) Gold Nickel 3.94 7.62 TEFLON B MIL Type 415774-1
Mated Pair .155 300
A
B
Recommended
PC Board Layout
2.54
[.100]
5.08
[.200]
5.08
[.200]
Ø 1.60
[.063]
4 Plcs.
Ø 1.19
[.047]
Ø 0.97 ± 0.03
[.038 ± .001]
11.53 ± 0.20
[.454 ± .008]
3.94 ± 0.13
[.155 ± .005]
Ø 6.35
[.250]
6.32
[.249]
0.64
[.025]
1.02 ± 0.05
[.040 ± .002]
5.08 ± 0.05
[.200 ± .002]
1.42
[.056] Typ.
6.35
[.250]
Sq.
Typ.
Recommended
PC Board Layout
Ø 1.60
[.063]
Ø 1.19
[.047]
5.08
[.200]
2.54
[.100]
4 Plcs.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
SMB Connectors, 50 Ohm (Continued)
13.46
[.530]
Dia.
6.35
[.250]
A
B
Plugs
Center Interface PCB Dim. Dim. Recommended Part
Contact Body Leg Dielectric Style PC Board
Plating Plating Plating AB Layout No.
8.76 2.79
Gold Nickel Nickel TEFLON .345 .110 Die Cast B 415380-1*
8.76 3.94
Gold Nickel Tin TEFLON .345 .155 Die Cast A 5414338-1
* 5 leg design
Recommended
PC Board Layouts
5.08
[.200]
2.54
[.100]
5.08
[.200]
1.24 Dia.
[.049] Min.
1.75 Dia.
[.069] Min.
(4 Holes)
AB
Ø 1.24 ± 0.05
[.049 ± .002]
2.54
[.100]
5.08
[.200]
5.08
[.200]
Ø 1.75
[.069]
4 Plcs.
C
2.54
[.100]
5.08
[.200]
5.08
[.200]
Ø 1.32
[.052]
5 Plcs.
12.70
[.500] A
B
A
B
13.46
[.530]
Jack with Standoff PadsJack Low Profile
Jacks
Center Interface PCB Dim. Dim. Recommended Part
Type Contact Body Leg Dielectric Style PC Board
Plating Plating Plating AB Layout No.
7.11 3.94
Gold Gold Gold TEFLON .280 .155 MIL Type A 413996-2
Low Profile
7.11 3.94
Gold Nickel Nickel TEFLON .280 .155 MIL Type A 413996-4
7.11 2.79
Gold Gold Gold TEFLON .280 .110 Die Cast A 415340-1
8.76 2.79
Gold Gold Gold TEFLON .345 .110 Die Cast A 415672-1
8.51 3.94
Gold Gold Gold TEFLON .335 .155 MIL Type A 414026-2
8.76 3.94
Gold Nickel Nickel TEFLON .345 .155 MIL Type A 414026-3
With 8.76 3.94
Standoff Pads Gold Nickel Tin-Lead TEFLON .345 .155 Die Cast A 5414337-1
8.76 2.79
Gold Nickel Nickel TEFLON .345 .110 Die Cast B 5415379-1*
8.51 3.94
Gold Nickel Nickel TEFLON .335 .155 Die Cast A 415381-1
7.67 2.79
Bulkhead Gold Gold Gold TEFLON .302 .110 Die Cast A 414963-1
9.78 3.94 Brass,
Commercial Gold Nickel Tin Polypropylene .385 .155 Stamped C5228435-1
7.67 2.79
Bulkhead Gold Gold Gold TEFLON .302 .110 Die Cast A 1274330-1
* 5 leg design
PC Board,
Right-Angle Jacks
A
B
19.87
[.782]
Bulkhead Jack
PC Board,
Right-Angle Plug
181
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
182
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 50 Ohm (Continued)
5/4.88
[.197/.192]
Dia.
2.08/2.01
[.082/.079]
Maximum Panel Thickness 2.36 [.093]
Recommended Panel Cutout
Bulkhead PC Board Jack,
Solder Receptacle Kits
SMB Receptacle Jack
Center Body Kit
Type Contact Dielectric Style Part
Plating Plating No.
Front Mount Gold Nickel TEFLON MIL Type 228216-1*
Rear Mount Gold Nickel TEFLON MIL Type 228215-1*
*includes Jam Nut and Lockwasher
Center Body
Type Contact Dielectric Style Part No.
Plating Plating
Front Mount Gold Nickel TEFLON MIL Type 414895-1
Lockwasher and Jam Nut
Part No.
415001-2 Part No.
414969-2
Kit Includes Lockwasher
and Jam Nut
6.35
[.250] 3.71
[.146]
16.0
[.630] Max.
Hex.
3.68
[.145]
6.99
[.275]
Dia.
0.97 ± 0.13
[.038 ± .001]Dia.
Ref. Plane
Hex
10-32 UNEF-2A
4.45
[.175]
3.18
[.125]
2.92
[.115]
1.02
[.040]
3.45
[.136]
6.35
[.250]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
SMB Connectors, Mini 75 Ohm
Product Facts
■Industry standard for minia-
ture 75 ohm SMB
■SMB offers snap-fit
coupling for quick
connect/disconnect
■Suitable for high density
applications
■Fast easy cable assembly
■Low VSWR
■Connectors offer consistent
mating and unmating forces
■Straight plugs and jacks are
completely crimp termi-
nated
■Low cost
Mini 75 ohm SMB connec-
tors are ideally suited for
circuit miniaturization in
communication, broadband
and switching equipment
as well as a variety of other
applications.
They offer the same low
consistent mating/unmating
force as Tyco Electronics
standard SMB products and
therefore, outer contact
resistance values are main-
tained from connector to
connector.
Standard military, commer-
cial or Tyco Electronics tool-
ing can be used to
terminate these products.
Cost effective assembly of
the straight plugs is com-
pleted with a crimp center
contact and hex crimp on
the outer braid. Right-angle
plugs have a hex crimp on
the outer braid ferrule and
bifurcated solder center
contacts.
Electrical Characteristics
Impedance — 75 ohms
Frequency Range — 0 to 4.0 GHz
Insulation Resistance — 1000 megohms
Contact Current Rating — 1.5 amps DC max.
Mechanical Characteristics
Engagement Forces —Initial—14.0 lbs. [62.3 N] maximum engagement.
After 500 matings, 14.0 lbs. [62.3 N] maximum engagement.
Durability—500 cycles
Environmental Characteristics
Temperature Rating — -65°C to +165°C
183
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
184
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, Mini 75 Ohm (Continued)
RG Cable Center Contact Outer Contact Body Part No.
Plating Plating Plating
179, 187 Gold Nickel Nickel 5415484-1
179, 187 Gold Gold Nickel 5415484-2
RD 179 Gold Gold Nickel 5415484-3
RG Cable Center Contact Outer Contact Body Part No.
Plating Plating Plating
179, 187 Gold Gold Nickel 5415487-1
179, 187 Gold Nickel Nickel 5415487-2
RD 179 Gold Nickel Nickel 5415487-3
RG Cable Center Contact Body Part No.
Plating Plating
179, 187 Gold Nickel 415500-1
Ø 6.35
[.250]
Ø 1.73
[.068]
Ø 2.64
[.104]
17.78
[.700]Ref.
9.78 ± 0.25
[.385 ± .010]
13.7
[.539] Max.
16.0
[.630] Ref.
Ø 6.35
[.250]
10.21
[.402] Ref.
22.86
[.900] Max.
6.35
[.250] Hex.
10.92
[.430]
9.7
[0.38]
Ø 3.66 ± 0.05
[.144 ± .002]
4.52
[.178]
Ø 5.03
[.198]
Recommended
PC Board Layout
Straight Plug
Right-Angle Plug
Bulkhead Jack
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SMB Connectors, Mini 75 Ohm (Continued)
Leg Center Contact Body Part No.
Length Plating Plating
2.11
.083 Gold Gold Flash 415504-2
3.05
.120 Gold Gold 415504-3
3.05
.120 Gold Gold Flash 415504-4
Leg Center Contact Body Part No.
Length Plating Plating
2.79
.110 Gold Gold 415490-1
2.79
.110 Gold Nickel 415490-2
2.11
.083 Gold Gold 415490-3
2.11
.083 Gold Nickel 415490-4
Leg Center Contact Body Part No.
Length Plating Plating
2.79
.110 Gold Nickel 415377-1
2.79
.110 Gold Gold 415377-2
2.79
.110 Gold Gold 415377-5*
*Isolated.
Vertical PC Board Jacks
7.62 ± 0.18
[.300 ± .007]
Ø 3.67
[.145] Max.
5.08 ± 0.08
[.200 ± .003]
5.08 ± 0.08
[.200 ± .003]
Ø 0.71 ± 0.08
[.028 ± .003]
Ø 1.32 ± 0.08
[.052 ± .003]
4 Plcs.
2.54 ± 0.08
[.100 ± .003]
Recommended
PC Board Layout
7.95 ± 0.25
[.313 ± .010]
5.54
[.218]
3.18
[.125]
Ø 3.71
[.146]
Max.
14.1
[.555]
5.08 ± 0.08
[.200 ± .003]
5.08 ± 0.08
[.200 ± .003]
Ø 0.71 ± 0.08
[.028 ± .003]
Ø 1.32 ± 0.08
[.052 ± .003]
4 Plcs.
2.54 ± 0.08
[.100 ± .003]
Recommended
PC Board Layout
4.50
[.177]
Ø 3.71
[.146]
2.79
[.110]
19.94
[.785]
2.36
[.093]
Panel
Thickness
Max.
Max.
11.18
[.440]
5.08 ± 0.08
[.200 ± .003]
5.08 ± 0.08
[.200 ± .003]
Ø 0.71 ± 0.08
[.028 ± .003]
Ø 1.32 ± 0.08
[.052 ± .003]
4 Plcs.
2.54 ± 0.08
[.100 ± .003]
Recommended
PC Board Layout
Right-Angle PC Board
Jacks
Right-Angle PC Board
Bulkhead Jacks
185
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
186
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ)
Product Facts
■Widely used in data
transmission and telecom-
munication applications
■BT 43 connector developed
from the SMB range and
feature snap-on and
latching variant
■Most BT 43 connectors are
available as fully crimped
connectors.
■BT 43 and 75 Ωconnectors
available in solder and
crimp versions
The Tyco Electronics range
of 75 ohm SMB (SMZ)
connectors are designed
to meet the increasing
demands of the
Telecommunications
market, and are designed
in accordance with
BS9210 F0022.
Specifications
Max working voltage (dc) — 500 V
Max proof voltage (dc) — 1.5 kV
Contact resistance (inner) —
5 milliohm
Contact resistance (outer) —
1 milliohm
Bodies and other parts — Brass
Female center contacts —
Copper Alloy
Male center contacts —
Copper Alloy
Outer contacts — BeCu
Plating —
Contacts and critical surfaces — Gold
Other parts — Nickel
Insulators — P.T.F.E.
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
Cable Type Termination Method Body Plating Part No.
Inner Outer
RG 179B/U Crimp Crimp Selective Gold 1311097-1
BT2002 Crimp Crimp Selective Gold 1311098-1
Straight Plugs, Snap-On
30.5
[1.20]
28.0
[1.10]
20.4
[0.80]
8.8
[0.35]
Assembled
Dia.
Straight Plugs, Latching,
Crimp/Crimp
9.6
[0.38]
27.8
[1.09]
29.9
[1.18] Assembly
Dia.
Cable Type Body Plating Part No
RG 179B/U Selective Gold 1311099-1
BT2003 Selective Gold 1311100-1
BT2002 Selective Gold 1311101-1
BT2001 Selective Gold 1311696-1
BT3002, TZC75024 Selective Gold 1311102-1
RG 59B/U, Selective Gold 1313507-1
RG 140/U, URM90
187
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
188
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
Right-Angle Socket,
Latching, Solder/Crimp
23.0
[0.91]
21.0
[0.83] 16.3
[0.64] 9.9
[0.39]
Ref.
Ref.
Ref.
Ref.
Cable Type Body Plating Part No
RG 179B/U Selective Gold 1311106-1
BT2003 Selective Gold 1311698-1
BT3002, TZC75024 Selective Gold 1311111-1
RG 59B/U, RG 140/U Selective Gold 1313508-1
Straight Free Plug,
Crimp/Crimp
8.82
[0.35]
30.4
[1.20] Assembled
20.2
[0.80]
5.60
[0.22]
Dia.
Cable Type Body Plating Part No
RG 179B/U Selective Gold 1408041-1
Right-Angle Socket,
Snap-On, Solder/Crimp
17.93
[0.71]
21.67
[0.85] 16.86
[0.66]
Max.
10.16
[0.40] Max.
Max.
Max.
Cable Type Body Plating Part No
RG 179B/U Selective Gold 1311103-1
BT3002, TZC75024 Selective Gold 1311104-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
Straight Bulkhead Plug
30.8
[1.21] Assembled
Max
Panel
28.5
[1.12]
10.8
[0.43]
5.6
[0.22]
7.5
[0.30]
8.4
[0.33]
Dia.
3.0
[0.12]
Mounting Detail
Cable Type Termination Method Body Plating Part No.
Inner Outer
RG 179B/U Crimp Crimp Selective Gold 1311120-1
BT500B, BT2003, Crimp Crimp Selective Gold 1311701-1
BT2003A
BT3002, TZC75024 Crimp Crimp Selective Gold 1311122-1
Right-Angle Bulkhead Plug,
Solder/Crimp
20.4
[0.80]
21.5
[0.85] Ref.
16.7
[0.66] Ref.
10.1
[0.40] Ref.
Cable Type Body Plating Part No
RG 179B/U Selective Gold 1311115-1
7.50
[0.30]
8.00
[0.31]
A/F
32.1
[1.26] Assembled Length
10.75 ± 0.05
[0.42 ± .002]9.50 ± 0.10
[0.37 ± .004]
Panel Cut Out Dia.
Cable Type Termination Method Body Plating Part No.
Inner Outer
3M: 043, 031C, Crimp Crimp Selective Gold 1313511-1
CS4456, Gore: GCX
189
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
PC Board Plug 43/1D
6.20
[0.24]
0.90
[0.04]
11.4
[0.45]
3.80
[0.15]
5.08
[0.20]
5.08
[0.20]
Mounting Detail
1.20
[0.05]
Dia.
1 Hole
Dia.
Dia.
Dia.
4 Holes
1.70
[0.07]
Body Plating Part No.
Selective Gold 1311125-1
PC Board Plug 43/1E
13.2
[0.52]
5.08
[0.20] 5.08
[0.20]
1.20
[0.047]
Dia.
1 Hole
Dia.
4 Holes
1.70
[0.067]
9.5
[0.37]
6.5
[0.26]
Sq.
15.0
[0.59]
Mounting Detail
Body Plating Part No.
Selective Gold 1314103-1
190
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
DDF Plug,
Crimp/Crimp
30.4
[1.20] Assembled
27.9
[1.10]
10.3
[0.41]Dia.
Cable Type Body Plating Part No
RG 179B/U Selective Gold 1327083-1
BT2003 Selective Gold 1311117-1
BT2002 Selective Gold 1311700-1
B2001 Selective Gold 1313883-1
BT3002, TZC75024 Selective Gold 1311118-1
RG 59B/U, RG 140/U, Selective Gold 1313887-1
URM90
DDF Plug,
Crimp/Crimp
Cable Type Body Plating Part No
RD179, 124431 (Filotex),
1366 (Orebro), K02253D-1, Selective Gold 1314422-1
K02253-2 (Shuner)
27.8
[1.09] Ref.
Ref.
7.54
[0.30]
Right-Angle PC Board Plug
22.14
[.872]
Mounting Detail Panel Cutout Detail
5.08
[.200]
5.08
[.200]
2.54
[.100] 2.54
[.100]
14.00
[.551]
Ø 8.21
[.323]
5/16-32
UNEF Min.
4 Holes
3/8 Across Flats
Ø 6.22
[.245]
Ø 1.70
[.067]
Min.
Ø 1.20
[.047]
2.90 ± 0.10
[.114 ± .004]
Ø 8.35 ± 0.10
[.329 ± .004]
Part No. 1314102-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued)
Tester 430A
37.4
[1.47]
11.1
[0.44] Dia. 8.8
[0.35] Dia.
Extraction Tool 65A
100.0
[3.94]
10.0
[0.39] Dia.
Body Plating Part No.
Selective Plating 6-1311703-1
Straight Adapter
Plug-Plug
17.0
[0.67]
8.7
[0.34] A/F
2.2
[0.09]
Max.
Panel
17.1
[0.67] 7.5
[0.30]
8.0
[0.31]
11.0
[0.43]
Dia.
Dia.
Mounting Detail
Body Plating Part No.
Selective Gold 1313364-1
Selective Gold 1311127-1
Part No. 1313364-1 Part No. 1311127-1
Part No.
1311164-1
191
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
192
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMB Connector Crimp Tooling
* DANIELS Manufacturing Corporation
6103 Anno Avenue
Orlando, Florida 32809
Note: Equivalent military tool part numbers–
M22520/5-01 – DANIELS Hand Tool HX4
M22520/5-33 – DANIELS Die Set Y136
M22520/5-37 – DANIELS Die Set Y138
M22520/5-41 – DANIELS Die Set Y140
M22520/5-03 – DANIELS Die Set Y196
M22520/2-01 – DANIELS Hand Tool AFM8
Telephone: 407-855-6161
FAX: 407-855-6884
50 Ω/75 Ω
Commercial Connector Tooling MIL Type Connector Tooling
Center Contact Crimp Tooling Braid Crimp Tooling Center Contact Crimp Tooling Braid Crimp Tooling
Dies for MIL-C- Dies for MIL-C- Dies for
RG/U Tyco Electronics 22520/2-01 Tyco Electronics 22520/5-01 DANIELS* DANIELS* Selector Tyco Electronics DANIELS Hex Die
Cable PRO-CRIMPER Tool PRO-CRIMPER Tool Hand Positioner Position PRO-CRIMPER Hand Across
Hand Tool DANIELS* Position Hand Tool DANIELS* Hex Tool Number Hand Tool Tool Flats
Number Positioner Number Position Crimp Die Number Position
178, 178A, Female-K699 Female-K699 2.67
178B, 196, 58489-1 458489-1 A&B Y624 AFM8 4 58483-1 AHX4-1637
196A Male-K727 Male-K727 .105
Double Braid —————— AFM8 Female-K699 458483-1 BHX4-1637 3.25
178, 196 Male-K727 .128
174, 316 58489-1 Female-K699 458489-1 AY444 AFM8 Female-K699 458483-1 BHX4-1637 3.25
188, 188A Male-K727 Male-K727 .128
Double Braid Y196 3.84
174, 316, 58489-1 Female-K699 4 58489-1 CAFM8 Female-K699 4 58483-1 CHX4-1637
188 Location A .151
Double Braid Y196 3.25
174, 316, 58489-1 Male-K727 4 58489-1 CAFM8 Solder — 58483-1 BHX4-1637
188 Location A .128
179, 179A
179B, 161, 58489-1 Female-K699 4 58489-1 AY444 AFM8 Female-K699 4 58483-1 BHX4-1637 3.25
187, 187A, .128
BELDEN 9221
179, 179A
179B, 161, 58489-1 Male-K727 4 58489-1 AY444 — Solder — 58483-1 BHX4-1637 3.25
187, 187A, .128
BELDEN 9221
180, 180A —————— —Solder — 58483-1 CHX4-1637 3.84
180B .151
Mini SMB 75 ohm
179, 187 — Female-K699 — 58483-1 BHX4-1637 — — — — — — —
Solder
179, 187 — Center — 58483-1 BHX4-1637 — — — — — — —
Contact
Note: All 75 ohm SMB connectors have a solder center contact.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
DANIELS is a trademark of Daniels
Manufacturing Corporation.
193
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMC Connectors
Product Facts
■Three-piece designs
■Fast, clean cable assembly
■Connector bodies
preassembled
■Solderless termination —
no danger of heat damage
■Center conductor and braid
terminated with same tool
■Low noise level
■Miniature screw-on coupling
■TEFLON dielectric
The SMC Connector is
miniature and light-weight,
especially designed for
use in critical applications
where limited space and
vibration are of major
concern.
This connector is designed
in accordance with the
requirements of Specification
MIL-C-39012, Class II,
Category B to assure
the highest standards of
electrical and mechanical
performance. It has a con-
stant impedance of 50 ohms,
a voltage rating of 350 volts
and provides excellent
operation at frequencies
up to 10 GHz. It also has a
threaded coupling and can
be used with a wide range
of miniature coaxial cable
sizes including RG 174,
197, 187, 188 and 316.
Materials
Brass — QQ-B-626
Beryllium Copper — QQ-C-530
Copper — QQ-C-576
TEFLON Insulation — MIL-P-19468
Plating
Gold — MIL-G-45204
Electrical Characteristics
Nominal Impedance — 50 ohms
Working Voltage — 335 volts rms
Frequency Range — 0 to 10 GHz
Insulation Resistance — 1000
megohms min.
Contact Resistance —
Outer Contact — 1 milliohms
Center Contact —
Straight Connectors — 6 milliohms
Right-Angle Connectors —
12 milliohms
Dielectric Withstanding Voltage —
1000 volts rms
RF Leakage — –60 dB min., between
2 and 3 GHz
RF Insertion Loss —
Straight Connectors — 0.25 dB max.
at 4 GHz
Right-Angle Connectors — 0.50 dB
max. at 4 GHz
Corona Level — 250 volts min. at
70,000 ft [21 336 m]
Mechanical Characteristics
Mating/Unmating — 10-32 threaded
coupling
Cable Attachment — Crimp type,
both center contact and braid
Coupling Nut Retention —
35 lb [156 N] min.
Cable Retention — 20 lb [89 N] min.,
GR-174 cable
Durability — 500 cycles per
MIL-C-39012
Environmental Characteristics
Temperature Range —
–65°C to +85°C
Vibration — MIL-STD-1344, Method
2005, Condition IV
Salt Spray — MIL-STD-1344, Method
1001, Condition B
Temperature Cycling —
MIL-STD-1344, Method 1003,
Condition A (except low temperature
is –65°C)
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
194
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMC Connectors (Continued)
26.00
[1.022] Ref.
3.90
[.155] Ref.
SMC
Plug
Reference
Plane
Cable
Ref. Plane
9.50
[.375]
Ref.
13.80
[.545]
Hex.
5.50
[.218]
Hex.
5.90
[.234]
Part No. 1060220-1
Crimp
26.00
[1.022] Ref.
3.90
[.155] Ref.
SMC
Plug
Reference
Plane
Cable
Ref. Plane
9.50
[.375]
Ref.
13.80
[.545]
Hex.
5.50
[.218]
Hex.
5.90
[.234]
Part No. 1060221-1
Crimp
16.90
[.667] Ref.
5.50
[.218] Hex.
5.90
[.234] Hex.
Cable
Ref.
Plane
Ref.
Plane
SMC
Plug
3.90
[.155]
Ref.
Part No. 1060163-1
Clamp
Cable RG/U Part No.
Attachment Cable
Crimp 178, 178A, 178B 1060220-1
196, 196A
Crimp 174, 316 1060221-1
188, 188A
Clamp 174, 316 1060163-1
188, 188A
Bulkhead Feedthrough
Cable Jacks
19.80
[.780]
Assembled View
3.18
[.125]
6.35
[.250]
5.94
[.234]
4.37
[.172]
Recommended Strip Length
Suggested Panel Cutout
Ø 4.88–5.00
[.192–.197]
2.01–2.08
[.079–.082] Max.
Contact
Ferrule
Nut
Hex.
Cable
Customer Supplied
Lockwasher
Plug Assembly
Cable RG/U Part No.
Attachment Cable
Crimp 174, 316 51751-1
188, 188A
Straight Jacks
24.20
[.953] Nom. 6.00
[.236]
Across
Flats
Clamp Nut 10-32, UNF-2A
Sub-Assembl
y
Cable RG/U Part No.
Attachment Cable
Clamp 174, 316 1311638-1
188, 188A
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Straight Plugs
195
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMC Connectors (Continued)
Press-In Panel Jacks,
Straight Terminal
3.50
[.138] 5.05
[.199]
1.00
[.039]
5.20
[.205]
4.50
[.177]
2.00
[.079]
16.50
[.650]
5.00
[.197]
Ø 0.90
[.035]
Part No. 1460470-1
11.40
[.448]
7.40
[.293]
6.20
[.243] 1.30
[.050]
3.90
[.155]
3.20
[.125]
Ref.
Ref. Plane
6.40
[.250]
1.00
[.038]
Sq.
5.10
[.200] Typ.
2.50
[.100] Typ.
Dia.
1.00
[.040]
Sq.
4 Plcs.
SMC Jack
.190-32, UNF-2A
Part No. 1060256-1
Right-Angle Cable Plug
14.60
[.575] Ref.
6.50
[.256] Ref.
15.10
[.594]
6.40
[.250]
1.00
[.040]
Cable
Ref. Plane
Ref. Plane
Ref.
Ref.
SMC Plug
Hex.
5.50
[.218]
Hex.
5.90
[.234]
Cable RG/U Part No.
Attachment Cable
Clamp 174, 316 1060183-1
188, 188A
PC Board Jack
Receptacles
Straight
11.00
[.432]
3.90
[.152] 3.90
[.155]
0.50
[.020]
Ref.
14.20
[.563]
7.10
[.280]
Ref. 1.00
[.038] 5.10
[.200]
6.30
[.250]
Typ.
1.00
[.040]
Sq.
Typ.
1.80
[.070] Typ.
1.80
[.070] Typ.
Dia.
SMC Jack
.190-32, UNF-2A
Part No. 1060259-1
5.08
[.200]
Ø 1.30
[.051]
5.08
[
.200
]
2.54
[.100]
2.54
[.100]
4 Plcs.
+ 0.08
– 0.00
+ .003
– .000
Ø 1.70
[.067 ]
Rcommended PC Board Layout
Right-Angle
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
196
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors
Product Facts
■Snap-on interface facilitates
assembly
■Conforms to CECC interface
specifications for MCX
■30% smaller than SMB
connectors
■Surface mount tape and reel
for high volume
■50 and 75 ohm versions
available
Tyco Electronics MCX
microminiature snap-on
connectors offer an excel-
lent blend of size, durability
and performance for
emerging applications in
GPS, automotive and wire-
less communications. MCX
connectors are 30% smaller
than traditional snap-on
SMB connectors, offering
greater packaging density
and weight reduction. MCX
connectors are mechani-
cally robust with beryllium
copper spring fingers rated
at a minimum of 500 mating
cycles. The snap-on inter-
face facilitates assembly,
eliminating the need for a
threaded connection, and
ensuring full engagement.
The forces to engage and
disengage have been opti-
mized to ensure ease of
mating as well as to prevent
damage to PCB solder
connections. MCX connec-
tors are designed for broad
band performance, DC-6
GHz, and can be utilized
for future system upgrades
without concerns for
performance degradation.
Tyco Electronics MCX
connectors are fully mate-
able with standard MCX
connectors and conform
to the CECC interface
specifications.
MCX connectors are avail-
able in a broad range of
standard configurations for
commercial applications.
Tape and reel packaging for
MCX surface mount straight
and right-angle PCB recep-
tacles is available to facili-
tate high volume pick and
place manufacturing. MCX
surface mount connectors
are designed to withstand
infrared reflow, convection
and vapor phase soldering
and provide a .254 [.010]
standoff for optimal board
cleaning. MCX plug and
jack PCB receptacles also
offer a direct board to board
solution providing a nominal
7.11 [0.28] separation.
Between Series Adapters
For MCX Between Series Adapters, see
pages 251-260.
MCX Connectors (Continued)
General CECC 22220 PARA
Materials —Brass alloys UNS C36000 (ASTM-B16) or C38500 per QQ-B626, Beryllium copper per
ASTM B-196, PTFE fluorocarbon per ASTM-D-1710
Finish — Center Contacts: Gold plated (ASTM-B488) over nickel plate (QQ-N-290)
—Outer Contacts: Gold plated (ASTM-B488) over nickel plate (OO-N-290)
—Housings: Nickel plated (QQ-N-290), tin (ASTM-B488) or Gold plated (ASTM-B488)
—All other metal parts shall be furnished so as to provide a connector which meets corrosion
requirements of CECC 22220 PARA 4.6.10
Design —The design shall be such that the outline and interface dimensions shown in this catalog and the
requirements of CECC 22220 PARA are met
Electrical CECC 22220 PARA (General requirements performance may vary by cable)
Frequency — dc - 6 GHz
Nominal Impedance — 50 ohms
Voltage Rating — 335 Volts (VRMS Maximum) @ Sea Level
VSWR 4.4.1 1.25:1 Maximum @ 4 GHz
—1.35:1 Maximum @ 6 GHz
Insulation Resistance 4.4.4 10,000 Megohms Minimum
Insertion Loss — .1dB Maximum/1000 MHz
Dielectric Withstanding Voltage 4.4.5 1000 Volts (VRMS Minimum) @ Sea Level
Contact Resistance
Center Contact 4.4.2 5.0 Milliohms Maximum
Outer Contact 4.4.3 1.0 Milliohms Maximum
Corona 70,000 ft. — 250 Volts (VRMS Minimum) @ MHz
RF High Potential @ Sea Level — 670 Volts (VRMS Minimum) @ MHz
Contact Current — 1.5 ADC Max
Mechanical CECC 22220 PARA
Force to Engage 4.5.4 15.5 N [3.4 lbs.] Maximum
Force to Disengage — 8 – 20 N [1.8 – 4.5 lbs.]
Contact Captivation 4.5.2 Designed to maintain MCX interface when mating 10 N [2.2 lbs.] axial
Connector Durability 4.7.1 500 insertion and withdrawal cycles
Environmental CECC 22220 PARA
Temperature Rating — –65˚C + 165˚C
Vibration 4.6.3 See CECC 22220
Moisture Resistance 4.6.4 See CECC 22220
Corrosion 4.6.10 See CECC 22220
Thermal Shock 4.6.7 See CECC 22220
Meets or exceeds requirements of CECC 22220. Tyco Electronics has design control and all data contained herein is subject to change without notice.
Contact Tyco Electronics for specifications on other connector types.
F
E
D
DIA.C
DIA.B
A DIA.
G
I DIA.
J DIA. H DIA.
M
L
K
N
Plug
Letter Minimum Maximum
A0.48 [.0189] 0.53 [.0208]
B2.00 [.0788] —
C—3.8 [.148]
D0.00 [.000] 0.30 [.0118]
E2.80 [.111] 3.20 [.125]
F4.15 [.164] —
G2.80 [.111] —
Jack
Letter Minimum Maximum
H—1.98 [.077]
I3.42 [.135] 3.48 [.137]
J3.60 [.142] 3.75 [.147]
K2.30 [.091] 2.80 [.110]
L2.60 [.103] 2.80 [.110]
M4.00 [.158] 4.12 [.162]
N0.75 [.0296] 0.85 [.0334]
Specifications
197
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
198
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
12.00
[.472]
6.15
[.242]
7.92
[.312]
Ref. 5.00
[.197]
3.50
[.137]
Sq.
MCX Plug
16.3
[.642] Ref.
5.00
[.197] Dia.
MCX Plug
Right-Angle Cable Plug,
Crimp
Straight Cable Plug,
Crimp
Cable Plating Part No.
RG 178/U, 196/U Nickel 1060869-1
RG 174/U, 188/U, 316/U Nickel 1060872-1
Gold 1060871-1
RD-316 Nickel 1060875-1
Gold 1060875-2
Note: For full crimp attachment consult Tyco Electronics at the numbers
listed below.
Cable Plating Part No.
RG 178/U, 196/U Nickel 1329293-1
RG 188/U, 316/U Nickel 1330723-1
RG 179/U, RG 187/U
RD-316 Nickel 1363301-1
Gold 1363301-2
Straight Cable Terminal,
PC Board, Without Center
Contact
4.00
[.157]
A Ref.
B
5.80
[.228] Dia.
Cable Dim. A Dim. B Plating Part No.
11.76 3.94 Nickel 1060811-1
RG 174/U, .463 .155 Gold 1060811-2
188/U, 316/U 10.74 2.92
.423 .115 Gold 1060813-2
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
MCX Connectors (Continued)
Bulkhead Cable Jack
17.0
[.669]
1.40
[.055]
Ref.
5.00
[.197]
4.90
[.193] Min.
4.50
[.177]
Min.
Recommended
Mounting Hole
Max Panel
Thickness
4.80
[.189] Dia.
MCX
Jack
Cable Plating Part No.
RG 188/U, RG 316/U Nickel 1060883-1
5.00
[.197]
11.3
[.445]
Dia.
MCX
Plug
Cable Plating Part No.
RG 405/U [.085] Gold 1060772-1
.047 Gold 1060772-2
Straight Cable Plug,
Direct Solder Attachment
For Semi-Rigid Cable
5.00
[.197]
11.9
[.469]
MCX
Jack
Dia.
Cable Plating Part No.
RG 405/U [.085] Gold 1060774-1
.047 Gold 1060774-2
Straight Cable Jack,
Direct Solder Attachment
For Semi-Rigid Cable
199
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
200
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
Right-Angle Plug Receptacle,
Direct Solder Attachment
For Semi-Rigid Cable
3.10
[.122]
7.00
[.276]
7.92
[.312]
MCX
Plug
5.00
[.197]
3.48
[.137]
6.15
[.242]
Dia.
Cable Plating Part No.
RG 405/U Gold 1060787-1
Plating Part No.
Nickel 1061015-1
Gold 1085221-1
Vertical Plug Receptacle,
PC Board
0.97
[.038]
5.77
[.227]
MCX
Plug
4.45
[.175]
3.94
[.155]
Dia.
6.00
[.236]Sq.
5.08
[.200]
Typ. 0.91
[.036] Sq.
4 Plcs.
0.97
[.038]
MCX
Jack
4.45
[.175]
Dia.
5.08
[.200] Typ.
6.00
[.236] Sq.
A
B
0.91
[.036] Sq.
4 Plcs.
Dim. A Dim. B Plating Part No.
8.28 2.92 Nickel 1060985-1
.326 .115 Gold 1060984-1
9.30 3.94 Nickel 1060989-1
.366 .155 Gold 1330126-1
7.09 1.73 Nickel 1060996-1
.279 .068 Gold 1060995-1
Vertical Jack Receptacle,
PC Board
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
MCX Connectors (Continued)
10.31
[.406]
4.45
[.175]
4.70
[.185]
1.68
[.066]
3.91
[.154]
4.57
[.180]
Ref.
0.97
[.038] Dia. Pin
6.35
[.250]
MCX
Jack
Sq.
A
B
0.97
[.038]
Dia.
9.50
[.374] 6.50
[.256]
3.00
[.118]
6.00
[.236]
Sq.
5.08
[.200]
Typ.
0.91
[.036]Sq.
4 Plcs.
MCX Jack
8.70
[.342]
6.35
[.250]
.580
[.023]
6.50
[.256]
4.50
[.177]
Min.
5.50
[.217]
2.50
[.098]
MCX
Jack
Across
Flats Lockwasher Hex.
0.97
[.038] Dia.
Dia.
Recommended Mounting Hole
4.90
[.193]Dia. Min.
.190-56,UNS-2A
Max.
Panel
Vertical End Launch,
PC Board
Plating Part No.
Tin 1061007-1
Right-Angle Jack
Receptacle, PC Board
Dim. A Dim. B Plating Part No.
9.93 3.94 Nickel 1061023-1
[.391] [.155] Gold 1061022-1
7.72 1.73 Nickel 1061027-1
[.304] [.068] Gold 1061026-1
8.92 2.92 Nickel 1061030-1
[.351] [.115] Gold 1061029-1
Jack Receptacle,
Bulkhead Feedthrough
Plating Part No.
Nickel 1060960-1
Gold 1060959-1
201
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
202
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
MCX Connectors (Continued)
5.90
[.231]
Ref.
4.45
[.175]
MCX Jack
0.97
[.038] Dia.
6.00
[.236] Sq.
5.08
[.200]
Typ.
0.91
[.036]
Sq.
4 Plcs.
Vertical Jack Receptacle,
Surface Mount
Plating Part No.
Tin 6061002-1
6061092-11
1Tape and Reel packaging. 900
connectors per reel (carrier width
16mm, carrier pitch 12mm).
6.50
[.256]
3.50
[.137]
0.97
[.038]
9.50
[.374] 6.50
[.256]
Dia.
6.00
[.236] Sq. 5.08
[.200]
Typ.
0.91
[.036]
Sq.
4 Plcs.
MCX Jack
Right-Angle Jack Receptacle,
Surface Mount
Plating Part No.
Tin 6061035-1
Tin 6061094-11
1Tape and reel packaging. 750 con-
nectors per reel (carrier width
24mm carrier pitch 12mm).
Recommended Mounting Pattern for Microstrip Line
Notes:
1. Printed circuit board material:
glass epoxy FR-4 or similar; rela-
tive permittivity: 4.8, 1 oz. copper
clad both sides.
2. These dimensions valid for 1.58
[.062] board thickness.
3. Decimal inch equivalents are
shown in parentheses for general
information only.
1.78
[.070]
8.89
[.350]
2.54
[.100]
11.43
[.450] 5.08
[.200]
5.72
[.225]
2.54
[.100]
4.45
[.175]
.953
[.375]
5.08
[.200]
Dia. Pad
5 Plcs.
1 oz. Copper
Area Free of Solder Mask
2.22
[.088]
4 Plcs.
.510
[.020]
Dia. Via.
4 Plcs.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Vertical Jack, PC Board,
75 Ohm
Plating Part No.
Gold 1363106-1
6.4
[.252]
10.0
[.394]
5.99
[.236]
3.4
[.134] 0.7
[.026] Dia.
9.4
[.370]
0.8
[.036]
4 Plcs.
5.08
[.200]
Sq.
6.0
[.236]
Sq.
Sq.
2.54
[.100]
5.08
[.200]
1.3
[.051]
Thru
5 Plcs.
MCX Connectors (Continued)
Straight Cable Plug,
Crimp, 75 Ohm
Cable Plating Part No.
RG 179/U Nickel 1362990-1
Cable Plating Part No.
RG 179/U Nickel 1362991-1
Right-Angle Cable Plug,
Crimp, 75 Ohm
Vertical Plug, PC Board,
75 Ohm
Plating Part No.
Nickel 1361169-1
17.5
[.687]
Ø 5.0
[.196]
12.4
[.490]
9.9
[.390]
7.9
[.312] 6.1
[.241]
6.86
[.270]
6.35
[.250]
Ø 0.71
[.028]
1.91
[.075]
6.0
[.236]
5.08
[.200]
Typ. Typ.
Sq.
Sq.
2.54
[.100]
0.91
[.036]
4 Plcs.
Typ.
203
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
204
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Compression Coax Board-to-Board Connectors
Board-to-Board RF
Connector Series
■Single connector product
■Surface mount technology
■Excellent price-to-
performance ratio
Product Facts
■Single connector design —
no mating connectors
needed
■Available in four sizes for
varied board spacing:
14mm, 10mm, 6.65mm and
4mm
■Large radial and axial
misalignment: For
positioning both boards and
for gap between boards
■Surface Mount Device for
standard pick & place
compatibility
■Gold plated phosphor
bronze and brass contacts,
stainless steel springs
■Mating directly on target
board
■Easy connection without risk
of breaking soldering or
connector when mating or
unmating
■Low applied material and
assembly costs
Applications
■Modular parallel board-to-
board blindmate
applications
■Base Station / Sub Station
systems
■PDA / PCS / Cellular
Handset applications
■Wireless Communications
systems (GSM, PCS,
WCDMA, UMTS)
Related Product Data
Internet — http://tycoelectronics.com/products/rfcoax
Product Specification/Design Objectives — 108-71060
Test Report — 501-90021
Sample Kit — 1-1773441-3
Specifications
Characteristic Impedance —
50 Ohms
Frequency Range — Up to 6 GHz
Return Loss — –20dB min.; up to
2.2 GHz (all misalignments)
Shielding Effectiveness —
–60 dB min.; up to 2.2 GHz
Working Voltage — 125 VAC, 50 Hz
(at sea level)
Dielectric Withstanding Voltage —
500 VAC, 50 Hz (at sea level)
Insulation Resistance —
100 Megohms
Operating Temperature —
–40 to +125°C
Mating Force — 10 N
Durability — 25 cycles
Angle Between Boards — ± 2° max.
Axial Misalignment — ± 1.0mm
from nominal boards stacking height;
±0.4mm, ± 0.3mm for shortest models
(Part Numbers 619135 and 1658260)
Radial Misalignment — ± 0.8mm
from center line in any direction
Vibration — 20 g between 58-500 Hz
(Const. amplitude of 1.5 mm between
10-58 Hz)
H
2° Max.
Target Board
Base Board
Part Number Height “H”
619127-1 14 ± 1.0mm
619134-1 10 ± 1.0mm
619135-1 6.65 ± 0.4mm
1658260-1 4 ± 0.3mm
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
205
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
STAX Coax Connectors
Product Facts
■Low cost, low height and
high performance
■Low insertion loss
0 to –0.5 dB from 0 to 6 GHz
■VSWR < 1.07 from 0 to 6 GHz
■Wide working range of
deflection
■Long term reliability and
durability
■Surface mount/pick and
place
■Low board separation
≤2.5 mm
■Technology can support
board separations ≤1.5 mm
■Easily modified free height
■No tooling required for
height modifications
■Modified prototype samples
within 2 weeks
Tyco Electronics’ STAX
coax RF connector is the
first surface mount RF
board-to-board connector
on the market that uses
elastomeric connector
technology to provide an
economical means to
achieve low board separa-
tion while maintaining
excellent RF signal integrity
between PCBs.
The connector uses
laminated sections of
conductive and non-
conductive silicone that are
tuned to provide a 50 ohm
impedance line between
mated substrates. The
single piece construction
of the STAX coax RF
connector eliminates some
of the signal anomalies
normally associated with
mated pairs of metal contact
coax connectors. The
dimensional relationship
of the inner and outer
conductor is consistently
maintained throughout the
connector.
With its metal holder, the
STAX coax RF connector
can be surface mount
soldered to the PCB. An
additional metal SMT holder
aligns the connector to the
mating PCB. If adequate
PCB alignment is already
maintained by other means,
the STAX RF connector may
not need the additional
mating receptacle and
can become a blindmating
connector. This has an
additional advantage in
space constrained mobile
applications where very
fine-pitch board-to-board
connectors are also used.
Related Product Data
Internet — www.elastomerictech.com
www.tycoelectronics.com
Elastomeric Technologies Applications Engineering —
Phone: 1-800-989-STAX ext. 4453
Fax: 1-215-784-4522
E-mail: ETIapplicationseng@tycoelectronics.com
Technical Documents —
Qualification Test Report — T R 368
RF Performance Report — 00266
Electrical Characteristics
Contact Resistance — < 50 mΩ
Insulation Resistance — 1012 Ω
min.
Dielectric Withstanding Voltage
(without breakdown or arcing) —
1000 Volt
Physical Characteristics
Board Separation — 2.5 mm ± 0.2
(std. part)
PCB Board Area — 4.0 mm dia.
Typical Clamping Force — See chart
Environmental Characteristics
Operating Temperature —
–40°C to +125°C
Moisture — 0 to 100% RH
RF Coax Connectors
206
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
STAX Coax Connectors (Continued)
RF Coax Connectors
Description Part Number
STAX SMT Coax Connector Assembly: 619229-1
Consists of STAX Coax elastomer in round SMT holder
Mating SMT Target Holder: 619238-2
Controls alignment between PCBs
STAX Coax RF Elastomer only: 1442004-1
Used with customer furnished holder
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Part Number 619229-1
SMT STAX Coaxial
Connector Assembly
2.40
[.094]
2.50 ± 0.20
[.098 ± .008]
Mated Condition
4.00
[.157]
Conductive
Elastomer
Outer
Conductor
Conductive Elastomer
Inner Conductor
Non-conductive Elastomer
2.40
[.094]
3.20
[.126] Unmated
2.20
[.087]
0.40
[.016]
0.40
[.016]
0.55
[.022] Center Conductor
Dielectric
Material Board
Outer Conducto
r
Solder Ring
Solder Mask
1.60
[.063] 3.20
[.126]
3.50
[.138]
4.30
[.169]
PCB Pattern
Part Number 619238-2
SMT Mating Target Holder
5.00
[.197]
1.50
[.059]
0.55
[.022] Center Conductor
Dielectric
Material Board
Outer Conductor
Solder Ring
Solder Mask
1.60
[.063] 3.60
[.142]
4.20
[.165]
5.00
[.197]
PCB Pattern For Mating Target
207
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
SMT/QuickGrip Connectors
Product Facts
■Solderless Cable
Termination
■3.0 [.118] Mated Height
■Excellent Cable Retention
■Usable With Flexible and
Semi-Rigid Micro-Coaxial
Cables
■Tape and Reel Packaging
Tyco Electronics revolution-
ary SMT/QuickGrip product
line is designed to meet the
growing demand for a reli-
able, low cost system for
direct termination of coax to
a printed circuit board
(PCB). SMT/QuickGrip
technology eliminates the
requirement to connectorize
the coaxial cable, reduc-
ing assembly times and,
therefore, cost. The
SMT/QuickGrip surface
mount device occupies less
PCB area than conventional
through hole coaxial con-
nectors. An innovative
microstrip mounting pattern
and cable receptacle
design ensures excellent
grounding and PCB reten-
tion. The SMT/QuickGrip
cable termination system
stands a mere 3.0 [.118] off
the board when mated,
allowing for closer pitch/
spacing when designing a
system. The SMT/QuickGrip
design provides optimal
cable retention for applica-
tions where shock, vibra-
tion, and/or cable flexure
may be encountered. This
unique RF design accepts
both flexible and semi-rigid
micro-coaxial cables while
delivering exceptional RF
performance up to 3GHz.
These features make this
system extremely versatile
for design engineers and
offer a reliable, cost effective
alternative to direct solder-
ing of cable to the PCB. The
cable is inserted into the
device by means of a sim-
ple self-aligning hand tool,
eliminating the requirement
for skilled personnel. This
system removes the possi-
bility of damaged PCBs and
cables which are common
quality issues associated
with direct solder, while pro-
viding superior RF perform-
ance. The SMT/QuickGrip
accommodates multiple
cable insertions allowing
easy replacement of cables
for repairs. This receptacle
is designed for high volume
assembly using surface
mount technology and is
available in tape and reel
packaging for pick and
place board assembly. Pre-
stripped cables and inter-
series cable pigtails are
available as turnkey solu-
tions for your application
needs (i.e.: for use in
multi-board applications, for
connecting antennas to the
PCB, or point to point trans-
mission on the same PCB).
The SMT/QuickGrip cable
termination system is ideal
for wireless surface mount
applications in handsets,
pagers and personal
digital assistants (PDA).
The SMT/QuickGrip
mechanical and electrical
performance, coupled with
its ease of use, ensure it to
be a high quality, reliable
solution for current and
future interconnect needs.
Tyco Electronics is an
ISO9001 certified manufac-
turer and maintains an SPC
controlled manufacturing
environment. Please call
your local Sales or
Distribution office for
additional information and
qualification samples today.
Cable Conductor
Cable Dielectric
Cable Braid
Cable Jacket
6.4
[.250]
Ref.
3.2
[.120] Ref.
PWB
3.0
[.120] Ref.
PWB
3.0
[.120] Ref.
2.1
[.083] Ref.
1.3
1.26
1.22
1.18
1.14
1.1
0.3 0.6 0.9 1.2 1.8 2.1 2.4 2.7 3
FREQUENCY (GHz)
VSWR
Typical VSWR using SMT/QuickGrip with Omni-Flex 200 Cable
RF Coax Connectors
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
208
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors (Continued)
General
Materials
Housing: Polyphenylene Sulfide (PPS)
Contacts: Copper Alloy
Finishes
Contacts: Gold Plate over Nickel
Electrical
Frequency Range: DC - 3GHz
Impedance: Usable with 50 & 75 Ohm systems
Insertion Loss: .08 √ƒGHz
DWV: 750 VRMs
VSWR: 1.3:1@ 3GHz (Omni-Flex 200 and .047 [.002] Semi-Rigid)
1.4:1 @ 3GHz (.034 [.001] Semi-Rigid)
Mechanical
Connector Durability: 5 mating cycles min. (receptacle only)
Tape and Reel Packaging: 16 [.629] per EIA-481
Force to Disengage by
Cam-Out (grams): Omni-Flex 200 Cable - 543 typical
.034 [.001] Semi-Rigid - 852 typical
.047 [.002] Semi-Rigid - 1066 typical
Environmental
Temperature Rating: –40°C(–40°F) to 125°C(257°F) when mated with Omni-Flex 200 Cable
Resistance to Solder Heat: Infrared, convection, and vapor phase solderable (receptacle only).
Maximum reflow time/temperature not to exceed 260°C for 3 minutes.
Cable Information
Omni-Flex 200 Cable
Materials: FEP Flexible Cable (200°C)
Jacket: Fluorinated Ethylene Propylene
Shield: Silver plated copper wire,
44 AWG, 90% min. coverage
Dielectric: PTFE (Polytetrafluoroethylene)
Center Conductor: Silver Plated Copper Clad Steel, 30 AWG
Minimum Bend Radius: 6.35 [.250]
Insertion Loss (PVC and FEP cable only): 1.3dB/m, 0.4 dB/ft. @ 500 MHz
2.0dB/m, 0.5 dB/ft. @ 1 GHz
3.0dB/m, 0.9 dB/ft. @ 2 GHz
Center Conductor Resistance: .26 Ohms per foot average
Specifications
Strip Dimensions
Tyco Electronics
Omni-Flex 200 Cable
Part Number 1407578-1
Ø 1.30
[.051] Ref.
Leave Jacket
Slug On To
Protect Braid
Ø 0.87
[.034] or Ø 1.19
[.047] Ref.
Semi-Rigid Cable
(.034 and .047)
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
209
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors (Continued)
Recommended Mounting Pattern for Microstrip Line
Pick and Place
Feature
Ground
Contact
Center Contact
6.4
[.250]
0.5
[.020]
3.2
[.125]
Center Contact
Terminal
3.0
[.120]
3.4
[.135]
0.6
[.025]
1.3
[.050]
1.3
[.050]
Circuit Line
Ground Pad
Area Free of
Solder Mask
Copper
0.5
[.020]
7.8
[.305]
2.5
[.100]
3.8
[.150]
1.3
[.050]
2.4
[.096]
3.4
[.133]
9.0
[.345]
1.3
[.050]
2.4
[.095]
1.5
[.058]
Via.
4.3
[.169]
2 Plcs. 0.6
[.024] 2 Plcs.
Ø 0.5
[.020] 5 Plcs.
1.0 oz.
[.0014]
Description Part No.
Bulk Packaged 100/bag 1085456-1
700 Piece Reel 1086008-1
2000 Piece Reel 1086009-1
1. Printed wiring board material: glass epoxy FR-4 or similar,
relative permittivity: 4.8, 1 oz. copper clad both sides.
2. These dimensions valid for 1.6 [.062] board thickness.
Part No.
1088313-1
Cable Insertion Tool
PC Board Mount
Receptacle
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
210
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors (Continued)
Inter-Series Cable
Assemblies
SMA Straight Plug
Length A
19.2
[.755] Ref.
SMA Bulkhead Jack
Length A
21.3
[.837] Ref.
6.00
[.235]
Min.
6.40
[.250]
Recommended
Mounting Hole
Min.
Cable Assembly Length (A) Part No.
100 [4] 1329174-1
Omni-Flex 200 200 [8] 1329174-2
305 [12] 1310432-1
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
Cable Assembly Length (A) Part No.
100 [4] 1329175-1
Omni-Flex 200 200 [8] 1329175-2
305 [12] 1329175-3
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
211
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SMT/QuickGrip Connectors (Continued)
SMB Bulkhead Jack
Length A
17.1
[.675] Ref.
SMB Right-Angle Plug
Length A
12.7
[.500] Ref.
10.8
[.427]
14.0
[.550]
Cable Assembly Length (A) Part No.
100 [4] 1255378-4
Omni-Flex 200 200 [8] 1255378-5
305 [12] 1255378-6
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
Cable Assembly Length (A) Part No.
100 [4] 1408050-4
Omni-Flex 200 200 [8] 1408050-5
305 [12] 1408050-6
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
Inter-Series Cable
Assemblies (Continued)
4.40
[.172]
4.90
[.192] Min.
Min.
Recommended Mounting Hole
MCX Bulkhead Jack
Length A
16.8
[.662] Ref.
4.80
[.189]
11.4
[.447]
Ref.
Ø 4.90
[.192]
Recommended
Mounting Hole
Min.
4.50
[.177] Min.
Min.
Cable Assembly Length (A) Part No.
100 [4] 1408051-4
Omni-Flex 200 200 [8] 1408051-5
305 [12] 1408051-6
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
MCX Right-Angle Plug
Length A
10.8
[.425] Ref.
7.90
[.312] 6.10
[.241]
Cable Assembly Length (A) Part No.
100 [4] 1330401-4
Omni-Flex 200 200 [8] 1330401-5
305 [12] 1330401-6
Note:
1. Cable length tolerances: Length ‘A’ mm [In], Tolerance mm [In],
50 to 100 [3.94], ± 3 [± .12], 101 to 500 [3.98 to 19.69], ± 5 [± .20],
Over 500 [19.69], ± 10 [± .39]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Omni-Flex 200 cable is a
Tyco Electronics specified cable.
212
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System
Microminiature Surface
Mount RF Connectors
Product Facts
■3.0 [.118] mated height
■Excellent interface retention
■Flexible micro-coax cable
■360 degree mated rotation
■Tape and Reel packaging
available
The Tyco Electronics SSMT
surface mount Interconnect
System is designed to pro-
vide superior electrical and
mechanical performance
for wireless communication
applications. The SSMT
system occupies less
printed circuit board (PCB)
real estate than conven-
tional through hole coaxial
connectors. An innovative
microstrip mounting pattern
and plug receptacle design
ensure reliable grounding
and PCB retention
characteristics. The SSMT
Interconnect System allows
closer pitch/spacing,
standing 3.0 [.118] (fully
mated height) off the board.
The mated SSMT interface
allows 360 degrees of
rotation providing maximum
PCB design flexibility. It
has been designed to pro-
vide optimal retention for
applications where shock,
vibration or cable flexure
may be encountered. Force
to disengage by cable
load (cam-out) exceeds
300 grams.
The SSMT system is
designed to provide the
performance of much larger
industry standard connec-
tors. The SSMT Interconnect
System consistently
achieves broad band elec-
trical performance through
6 GHz with a maximum
VSWR of 1.20:1 at 2 GHz.
This broad band perform-
ance establishes a reliable
interface that can be utilized
for future system upgrades
without concern for perform-
ance degradation.
The SSMT utilizes a common
plug receptacle, part num-
ber 1251802-1, which is
designed for high volume
assembly using surface
mount technology and is
available in tape and reel
packaging for automatic
pick and place board
assembly. The mating cable
jack is available terminated
to a highly flexible micro-
coax cable as either a
pigtail, jumper or standard
interseries connector assem-
bly to meet your needs.
The SSMT Interconnect
System can be manually
mated, facilitating high
volume assembly and elimi-
nating the need for special
engagement tooling. The
SSMT interface design
aligns the center contacts
prior to full mating to
ensure a robust mechanical
engagement. Interface
durability is rated at 100
mating cycles.
213
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
General
Materials
SMT Plug Housing: Polyphenylene Sulfide (PPS)
Contacts: Copper Alloy
SSMT Cable Jack Outer Contact: Beryllium Copper
Inner Contact: Beryllium Copper
Dielectric: Polypropylene, GF
Finish Plug and cable jack - Contacts: Gold plate over nickel plate
Electrical
Frequency dc - 6 GHz
Nominal Impedance 50 Ohms
Voltage Rating 250 Volts (VRMS Maximum) @ Sea Level
VSWR (Mated Pair) 1.20:1 Maximum @ 2 GHz
1.40:1 Maximum @ 6 GHz
Insulation Resistance 5000 Megohms Minimum
Dielectric Withstanding Voltage 500 Volts (VRMS Minimum) @ Sea Level
Contact Resistance (Connectors Only)
Center Contact 15 milliohms Maximum
Outer Contact 10 milliohms Maximum
Insertion Loss (Connectors Only) .15dB Max. @ 6 GHz
Mechanical
Connector Durability 100 mating cycles
Tape/Reel Packaging (Plug) 12mm per EIA-481
Force to Engage 5.5 lbs. Max. (3.5 lbs. typ.)
Force to Disengage (2.0 lbs. typ.) 4.0 lbs. Max. (2.0 lbs. typ.)
Force to Disengage by 300 Grams Min. (800 Grams typ. initial mate)
Cable Load (camout)
Environmental
Temperature Rating (Mated Pair) –40°C (–40°F) to +125°C (257°F)
Resistance to Solder Heat Infrared, convection and vapor phase solderable (plug only).
Maximum reflow time/temperature not to exceed 260°C for 3 minutes.
Cable Specifications
Materials
Jacket: FEP (polytetrafluoroethylene)
Shield: Silver plated copper wire, 44 AWG, 90% min. coverage
Dielectric: PTFE ( polytetrafluoroethylene)
Center Conductor: Silver plated copper clad steel, 30 AWG
Minimum Bend Radius 6.35mm (.250 inch)
Insertion Loss (Cable Only) 0.5 dB/ft., 2.0 dB/m @ 1 GHz
0.9 dB/ft., 3.0 dB/m @ 2 GHz
Center Conductor Resistance .25 Ohms per foot average.
819 milliohm/meter Nom.; 250 milliohm/Ft. Nom.
Dia. Ref.
Outer Jacket Shield
(Braid)
1.3
[.052] Dia. Ref.
1.0
[.040] Dia. Ref.
0.8
[.030] Dia. Ref.
0.3
[.010]
Center
Conductor
Dielectric
Specifications
214
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Straight SMT PCB Mount
Plug Receptacle
Recommended Mounting Pattern for Microstrip Line
Right-Angle Jack to
Jack Cable Assembly
3.4
[.132] Ref.
2.1
[.081] Ref.
SSMT
Jack
5.3
[.208] Ref.
1.3
[.052]
Ref.
Cable
2.5
[.100]
Dia.
Ref.
Length A
Centerline to Centerline
5.0
[.197]
1.0
[.039]
4 Plcs.
4.5
[.177] 2.1
[.081]
4.0
[.157]
4.5
[.177]
Center
Contact
Terminal
0.4
[.015]
2.1
[.049]
3.0
[.118]
0.6
[.025]
0.5
[.020]
4 Plcs.
Center
Contact
(Pin)
Outer
Contact
Center
Contact
Terminal
Ground
Terminal
(3 Plcs.)
Notes:
1. Printed wiring board material:
glass epoxy. FR-4 or similar, rela-
tive permittivity: 4.8, 1 oz. copper
clad both sides.
2. These dimensions valid for 1.6
[.062] board thickness.
Notes:
1. Consult Tyco Electronics for non-standard cable lengths.
Length A Tolerances.
Length A Tolerance
50 To 100 [3.94] ± 3 [± .12]
101 To 500 [3.98 to 19.69] ± 5 [± .20]
Over 500 [19.69] ± 10 [± .39]
2. Connector centerlines align ± 30° as shown for lengths of 165 [6.5] or less. Cable assemblies over 165 [6.5] have
randomly aligned connectors.
9.0
[.354]
7.0
[.274]
6.0
[.236]
3.3
[.128]
0.5
[.019]
3.0
[.118]
0.5
[.020]
VIA Holes
3 Plcs.
1.6
[.064]
(See Note 2)
1.2
[.047]
1.2
[.047]
0.6
[.024]
1.2
[.047]
5.3
[.207] 2.9
[.113]
(See Note 2)
Area Free of
Solder Mask
1 oz.
[.0014] Copper
1.2
[.047] 3.3
[.128]
Packaging Quantity Part No.
Bulk Multiple of 100 1251802-1
178 Dia. Taping 800 pcs/reel 1083946-1
7.0
330 Dia. Taping 3000 pcs/reel 1055689-1
13.3
Assembly Length (A) Part No.
100 [4.0] 1064524-1
200 [8.0] 1064530-1
305 [12.0] 1064533-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
215
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Right-Angle Jack to Jack
Cable Assembly
(180° Offset)
2.1
[.081]
5.3
[.208]
Length A
Centerline to Centerline
Ref.
1.3
[.052] Ref. Cable
SSMT Jack
Ø 2.5
[.100]
Ref.
Assembly Length (A) Part No.
100 [4.0] 1082845-1
Assembly Length (A) Part No.
100 [4.0] 1064535-1
200 [8.0] 1064538-1
305 [12.0] 1064540-1
510 [20.0] 1064542-1
Notes:
1. Consult Tyco Electronics for non-standard cable lengths.
Cable length tolerance:
Length A Tolerances.
Length A Tolerance
50 To 100 [3.94] ± 3 [± .12]
101 To 500 [3.98 to 19.69] ± 5 [± .20]
Over 500 [19.69] ± 10 [± .39]
2. To avoid damaging the cable, minimize time at temperature
while soldering and/or applying heat to unterminated end of
cable.
Notes:
1. Consult Tyco Electronics for non-standard cable lengths.
Cable length tolerance:
Length A Tolerances.
Length A Tolerance
50 To 100 [3.94] ± 3 [± .12]
101 To 500 [3.98 to 19.69] ± 5 [± .20]
Over 500 [19.69] ± 10 [± .39]
2. To avoid damaging the cable, minimize time at temperature
while soldering and/or applying heat to unterminated end of
cable.
Right-Angle Jack Cable
Pigtail
5.3
[.208]
Length A
Centerline to Cable End
Ref.
2.5
[.100]
Dia.
Ref.
1.3
[.052] Ref. Cable
SSMT Jack
3.4
[.132] Ref.
2.1
[.081] Ref.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
216
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Inter-Series Cable
Assemblies
SMA Straight Plug
Reference Plane to Centerline
Length A
Dia. Ref.
Cable
1.3
[.052]
Ref.
19.2
[.757] Ref.
SSMT Right
Angle Jack
2.1
[.081]
Ref.
3.4
[.132]
Dia. Ref.
2.5
[.100]
Notes:
1. Consult Tyco Electronics for non-standard cable lengths:
Length A Tolerances.
Length A Tolerance
50 To 100 (3.94) ± 3 (± .12)
101 To 500 (3.98 to 19.69) ± 5 (± .20)
Over 500 (19.69) ± 10 (± .39)
2. Connectors are randomly aligned unless otherwise noted.
Note:
1064552-1 recommended for customer
system verification.
SMA Bulkhead Jack
Hex.
7.9
[.312]
Dia.
Min.
5.4
[.250]
6.0
[.235]
Min.
Length A
Reference Plane to Centerline
1.3
[.052]
Dia. Ref.
Cable
Ref.
21.3
[.839] Ref.
SSMT Right
Angle Jack Recommended
Mounting Hole
2.1
[.081]
Ref.
3.4
[.132]
Dia. Ref.
2.5
[.100]
Max. Panel
Thickness
3.2
[.125]
Assembly Length (A) Part No.
100 [4.0] 1064543-1
200 [8.0] 1064552-1
305 [12.0] 1064560-1
Assembly Length (A) Part No.
100 [4.0] 1064544-1
200 [8.0] 1064553-1
305 [12.0] 1064561-1
Hex.
6.4
[.250]
Hex.
7.9
[.312]
4.4
[.172]
Min.
Length A
Reference Plane to Centerline
1.3
[.052]
Dia. Ref.
Cable
Ref.
17.1
[.675]
7.4
[.290] Ref.
SSMT Right
Angle Jack
Re
Mo
2.1
[.081]
Ref.
3.4
[.132]
2.5
[.100]
Dia. Ref.
Max. Panel
Thickness
2.4
[.093]
SMB Bulkhead Jack
Dia.
Min.
4.9
[.192]
4.4
[.172]
Min.
Ref.
t
k
Recommended
Mounting Hole
.1
81]
Assembly Length (A) Part No.
100 [4.0] 1064546-1
200 [8.0] 1064555-1
305 [12.0] 1064563-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
217
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SSMT Surface Mount Interconnect System (Continued)
Length A
Centerline to Centerline
1.3
[.052]
Dia. Ref.
Cable
12.7
[.500]
Ref. Ref.
SSMT Right
Angle Jack
2.1
[.081]
Ref.
3.4
[.132]
6.1
[.241]
7.9
[.312]
Dia. Ref.
2.5
[.100]
MCX Right-Angle Plug
Ref.
101.6
[4.00]
SSMT Disengagement Tool
SSMT Plug to SMA Jack Adapter
Ref.
10.5
[.413]
Across Flats
SSMT Plug
SMA
Jack
5.5
[.218]
Part No.
1221286-1
SSMT to SMA Between Series
Adapters
Part No. 1055696-1
SSMT Jack to SMA Jack Adapter
Ref.
12.9
[.508]
Across Flats
SSMT Jack
SMA
Jack
5.5
[.218]
SSMT Jack to SMA Plug
Ref.
16.2
[.639]
SSMT
Jack
SMA
Plug
SSMT Plug to SMA Plug Adapter
Ref.
13.7
[.538]
SSMT
Plug
SMA
Plug
Inter-Series Cable
Assemblies (Continued)
Assembly Length (A) Part No.
100 [4.0] 1064550-1
200 [8.0] 1064559-1
305 [12.0] 1064567-1
SLIDE
HORIZONTAL
TO ENGAGE
TOOL
LIFT
VERTICAL
TO
DISENGAGE
CONNECTOR
PRESS VERTICAL
TO ENGAGE
CONNECTOR
OPTIONAL
Use of Engagement/Disengagement Tool
Note: The SSMT disengagement tool can be utilized as an optional engagement tool versus manual hand installation.
Part No. 1055695-1 Part No. 1055694-1 Part No. 1055697-1
Length A
Reference Plane to Centerline
1.3
[.052]
Dia. Ref.
Cable
Ref.
16.8
[.662] Ref.
SSMT Right
Angle Jack
2.1
[.081]
Ref.
3.4
[.132]
4.8
[.189]
Dia. Ref.
Dia.
2.5
[.100]
11.4
[.447]
6.4
[.250]
Hex. Recom
Mounti
6.4
[.250]
Max. Panel
Thickness
MCX Bulkhead Jack
Ref.
1
1]
Dia.
Min.
4.9
[.192]
4.5
[.177]
Recommended
Mounting Hole
Min.
Assembly Length (A) Part No.
100 [4.0] 1064549-1
200 [8.0] 1064558-1
305 [12.0] 1064566-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
218
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
MMCX Microminiature Snap-On Connector Series
Tyco Electronics’ micro-
miniature snap-on connec-
tors offer an excellent blend
of size, durability and
performance for emerging
applications in GPS, PCS,
automotive and wireless
communications. An exten-
sion of the popular MCX
series, MMCX connectors
are 35% smaller, offering
even greater packaging
density and weight reduc-
tion. MMCX connectors are
rated to 500 mating cycles.
The snap-on interface facili-
tates assembly, eliminating
the need for a threaded
connection, and ensuring
full engagement. The
forces to engage and disen-
gage have been optimized
to ensure ease of mating as
well as to prevent damage
to PCB solder connections.
MMCX connectors are
designed for broadband
performance, DC-6 GHz,
and can be utilized for
future system upgrades
without concerns for per-
formance degradation.
The non-slotted outer con-
tact provides for minimal
RF leakage. MMCX surface
mount connectors are
designed to withstand
infrared reflow, convection
and vapor phase soldering.
Tyco Electronics MMCX con-
nectors are fully mateable
with competitive MMCX
product and conforms to the
CECC interface specifica-
tions. They are available in
a broad range of standard
configurations, including
PCB and panel mount, flexi-
ble and semi-rigid cable.
Tape and reel packaging is
available on surface mount
product to facilitate high vol-
ume manufacturing. Other
options can be reviewed
as well, including additional
cable sizes, and adapters.
The MMCX connector series
is a cost effective solution
for the challenging demands
of today’s commercial mar-
ketplace. It offers one of the
smallest conventional crimp
terminations without special
tooling. Call your local sales
office or authorized distribu-
tor for additional information
or samples of the MMCX
connector series.
Product Facts
■Snap-on interface facilitates
assembly
■35% smaller than MCX
Series
■Designed for space saving
applications up to 6 GHz
■Conforms to CECC
Specifications
■Surface mount tape and reel
for high volume
8.80
[.347] Ref.
16.62
[.655] Ref.
MMCX SMB
Material and Finish
Shells — Brass
Bodies — Brass , plated gold
Center Contacts —
(Male) — Brass, plated gold
(Female) — Beryllium Copper, plated
gold
Dielectrics — PTFE
Electrical Characteristics in
accordance with CECC 22000
Frequency — dc – 6 GHz
Nominal Impedance — 50 ohms
Voltage Rating — 170 Volts
(VRMS Max.) @ Sea Level
VSWR — 1.25 : 1 Max. @ 6 GHz
Insulation Resistance —
1,000 Megohms Min.
Dielectric Withstanding Voltage —
500 Volts (VRMS Max.) @ Sea Level
RF Leakage — -60 dB Min.
@ 2.5 GHz
Contact Resistance —
Center Contact — 5 milliohms max.
Outer Contact — 1 milliohm max.
Mechanical Characteristics in
accordance with CECC 22000
Connector Durability —
500 mating cycles
Force to Engage — 18 Newtons Max.
Force to Disengage —
6 Newtons Max.
Center Contact Retention —
10 Newtons Min.
Cable Retention —
Axial — 45 Newtons Min.
Rotational — 0.05 N-m Min.
Environmental Characteristics
in accordance with CECC 22000,
Equivalent Test Conditions
Temperature Rating —
–55 to +155°C
Vibration — MIL-STD-202, Method
204, Condition B
Shock — MIL-STD-202, Method 213,
Condition A
Moisture Resistance —
MIL-STD-202, Method 106
Thermal Shock — MIL-STD-202,
Method 107, Condition B
Note: Performance specifications
are typical, but may not apply to all
connector types.
Related Product Data
Product Specification — 108-2084
Sample Kit — 1654779
MMCX Microminiature Snap-On Connector Series (Continued)
Cable Part No.
RG 405 1408313-1
2.7
[0.11]
1.45
[0.06]
Min.
Min.
0.25
[0.01]
2.6
[0.10] Min. 1.05
[0.04]
Max.
2.4
[0.09] Max. 2.41
[0.09] Min.
3.5
[0.14]
1.6
[0.06]
0.4
[0.02]
Reference Plane
0.7
[0.03]
Reference Plane
Ref.
MMCX Interface Dimensions
Plug Jack
Semi-Rigid Cable – Direct Solder Attachment
Straight Cable Plug
Ø 3.5
[0.14]
11.5
[0.45]
Cable Part No.
RG 405 1408314-1
Right-Angle Cable Plug
7.0
[0.28]
3.5
[0.14]
5.3
[0.21]
4.0
[0.16]
6.5
[0.25]
Cable Part No.
RG 178, 196 1408148-1
Captured Center Contact
Flexible Cable – Crimp Attachment
Straight Cable Plugs
Ø 3.5
[0.14]
11.5
[0.45]
Cable Part No.
RG 174, 1408312-1
188, 316
RD 316 1408312-2
Captured Center Contact
Ø 3.8
[0.15
]
15.9
[0.63]
Cable Part No.
RG 178, 196 1408149-1
RG 174, 188, 316 1408149-2
RD 316 1408149-3
Captured Center Contact
Right-Angle Cable Plug
7.0
[0.28]
3.5
[0.14]
5.3
[0.21]
4.0
[0.16]
11.9
[0.47]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
219
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
220
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
MMCX Microminiature Snap-On Connector Series (Continued)
5.6
[0.22]
1.4
[.055]
1.6
[.063]
2.1
[.083]
0.8
[.031]
1.4
[.055]
Ground Pad
Typ. Signal Pad
Part No.
1408150-1
Printed Circuit Board
Straight Jack Receptacle
Part No.
1408151-1
Right-Angle Jack Receptacle
Ø 0.7
[.028]
3.8
[.150]
3.5
[.138]
6.8
[.268]
2.6
[.102]
4.75
[.187]
6.5
[.256]
Reference Plane
Part No.
1408496-1
Straight Plug Receptacle
Ø 0.70
[.028]
4.50
[.177]
3.50
[.138]
2.80
[.110]
7.50
[.296]
Part No.
1393757-7
Surface Mount
Straight Jack Receptacle
2.6
[0.10]
5.0
[0.20]
5.0
[0.20]
PC Board
Part No.
1393757-6
Right-Angle Jack Receptacle
2.6
[0.10]
5.0
[0.20]
5.0
[0.20]
PC Board
3.5
[0.14]
Ø 0.7
[0.03] 3.5
[0.14]
4.5
[0.18] 7.5
[0.30]
2.6
[0.10]
Reference Plane
1.27
[.050]
Recommended Mountin
g
Holes
Ø 0.82
[.032]
2.54
[.100] Typ.
Typ.
1.27
[.050]
Recommended Mountin
g
Holes
Ø 0.82
[.032]
2.54
[.100] Typ.
Typ.
1.27
[.050]
Recommended Mountin
g
Holes
Ø 0.82
[.032]
2.54
[.100] Typ.
Typ.
Recommended Mounting Pattern
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
MMCX Microminiature Snap-On Connector Series (Continued)
Part No.
1408152-1
Edge Mount
Straight Jack Receptacle
Part No.
1408120-1
Straight Plug Receptacle
2.8
[.110]
3.4
[.134]
3.5
[.138]
7.45
[.293] 7.40
[.291]
Ø 0.70
[.027]
4.50
[.177]
2.80
[.110]
2.80
[.110]
7.45
[.293]
7.40
[.291]
Ø 0.70
[.027]
4.50
[.177]
2.70
[.106]
4.60
[.181]
3.50
[.138]
4.50
[.177]
2.20
[.087]
7.50
[.296]
1.95
[.077]
1.10
[.043]
Signal Pad
Ground Pad Typ.
4.50
[.177]
3.40
[.134]
3.50
[.138]
1.40
[.055]
Solder Pad Configuration Only
4.60
[.181]
3.50
[.138]
4.50
[.177]
2.20
[.087]
7.50
[.296]
1.95
[.077]
1.10
[.043]
Signal Pad
Ground Pad Typ.
Solder Pad Configuration Only
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
221
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
222
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series
Product Facts
■Ultra low profile (2.0 mm or
2.5 mm maximum mated
height)
■Easy snap on/off mating
■Small footprint on PCB
(3 mm x 3 mm)
■Excellent performance to
6 GHz
■Surface mount and reflow
solderable
■Available on 0.80 mm and
1.37 mm dia. single shield,
and 1.32 mm dia. double
shield cable
■Style A receptacles mate
with HIROSE U.FL/U.FL(v)
Series connectors
■Style B receptacles mate
with MURATA GSC Series
connectors
Description
■Extremely low profile
■Surface mount
technology
■360° mated rotation
■Excellent price-to-
performance ratio
Applications
■Wireless LAN, Mini PCI
■Mobile Antenna/GPS/
Radio Systems
■PDA/PCS/Cellular
Handset applications
■Wireless Communications
systems (LAN, GSM,
PCS, WCDMA, UMTS)
■Remote measuring
equipment
Electrical Characteristics
Characteristic Impedance —
50 Ohms
Frequency Range — DC to 6 GHz
VSWR (mated pair) —
1.30 max. DC to 3 GHz
1.40 max. 3 to 6 GHz (cable dependent)
Insertion Loss (connectors only) —
0.24 dB max. DC to 6 GHz
Rated Voltage —
60 VAC (rms) — standard receptacle
(Styles A, B)
Dielectric Withstanding Voltage —
200 VAC, 50 Hz for 1 min. @ sea level
Insulation Resistance —
500 Megohms min.
Contact Resistance (connectors
only) —
20 milliohms max. (Center)
10 milliohms max. (Outer, Plug)
10 milliohms max. (Outer, Receptacle)
Mechanical and Environmental
Characteristics
Durability —
30 cycles — standard receptacle
(Styles A, B)
Disengagement Force —
2N min. perpendicular
4N min. orthogonal
Center Contact Retention Force —
0.15N min.
Tape/Reel Packaging (receptacle) —
12 mm carrier per EIA-481
Operating Temperature —
–40°C to +90°C
Material and Finish
Shell — Phosphor bronze, plated gold
or silver
Male Center Contact — Brass or
phosphor bronze, plated gold
Female Center Contact — Brass or
phosphor bronze, plated gold
Insulator (Plug) — PBT (15% G.F.),
black, UL94V-0
Insulator (Receptacle) — LCP,
beige or black, UL94V-0
Related Product Data
Product Specification — 108-2231
Sample Kit — 1-1773441-6
HIROSE is a trademark of Hirose Electric.
MURATA is a trademark of Murata
Electronics, Inc.
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Material and Finish
Center Conductor —
0.8 mm Dia. — Silver plated copper
1.32 mm Dia. — Silver plated copper
1.37 mm Dia. — Silver plated copper
Center Conductor Size —
0.8 mm Dia. — Stranded 7/0.05 mm
1.32 mm Dia. — Stranded 7/0.08 mm
1.37 mm Dia. — Stranded 7/0.10 mm
Dielectric —
0.8 mm Dia. — FEP or PFA
1.32 mm Dia. — FEP
1.37 mm Dia. — FEP
Dielectric Size —
0.8 mm Dia. — 0.4 mm OD
1.32 mm Dia. — 0.66 mm OD
1.37 mm Dia. — 0.83 mm OD
Shield —
0.8 mm Dia. — Silver plated copper
braid
1.32 mm Dia. — Double SPL braid
1.37 mm Dia. — Silver plated copper
braid
Shield Coverage —
0.8 mm Dia. — > 90%
1.32 mm Dia. — > 90% (each braid
layer)
1.37 mm Dia. — > 90%
Jacket —
0.8 mm Dia. — FEP or PFA
1.32 mm Dia. — FEP
1.37 mm Dia. — FEP
Jacket Size —
0.8 mm Dia. — 0.80 mm OD
1.32 mm Dia. — 1.32 mm OD
1.37 mm Dia. — 1.37 mm OD
Mechanical Characteristics
Minimum Bend Radius —
0.8 mm Dia. — 5 mm single bend,
30 mm continuous flexing
1.32 mm Dia. — 5 mm single bend,
30 mm continuous flexing
1.37 mm Dia. — 5 mm single bend,
30 mm continuous flexing
Electrical Characteristics
Impedance (Ohms) —
0.8 mm Dia. — 50 ± 2
1.32 mm Dia. — 50 ± 2
1.37 mm Dia. — 50 ± 2
Velocity of Propagation —
0.8 mm Dia. — 70%
1.32 mm Dia. — 70%
1.37 mm Dia. — 70%
CC Resistance (Ohms/KM) —
0.8 mm Dia. — 1450
1.32 mm Dia. — 560
1.37 mm Dia. — 354
Voltage Rating —
0.8 mm Dia. — 60 VAC
1.32 mm Dia. — 60 VAC
1.37 mm Dia. — 60 VAC
Attenuation — See chart
Cable Information
Jacket Dielectric
Center
Conductor
Braided
Shield
-10
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
0.0 1.0 2.0 3.0 4.0 5.0 6.0
Frequency (GHz)
1.37 mm OD
1.32 mm OD
0.80 mm OD
Attenuation (dB/m)
UMCC Cable Attenuation
223
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
224
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
PCB Receptacles —
Style B
Printed
Circuit Board
H Max.
Receptacle
UMCC PCB Receptacle
1.8
[.071]
0.25
[.010]
2.6
[.102]
2.6
[.102]
2.1
[.083]
3.0
[.118]
1.15
[.045]
0.35
[.014]
Ø 2.1
[.083]
1.9
[.075]
2.2
[.087]
1.00
[.039]
Ref.
1.05
[.041]
1.0
[.039]
4.0
[.157]
Ref.
Cut Out Prohibition Area
Ref.
Ref.
Ref.
Ref.
0.6
[.023]
Style Mates with UMCC Mated Height Description Part Number
Connector Type (H)
BI 2.00 UMCC PCB Receptacle, 2500 Pc Reel 1775146-1
.079
BI 2.00 UMCC PCB Receptacle, 500 Pc Bag 1775146-2
.079
Recommended PC Board Layout
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
PCB Receptacles —
Style A
Printed
Circuit Board
H Max.
Receptacle
UMCC PCB Receptacle
1.8
[.071]
0.25
[.010]
2.6
[.102]
2.6
[.102]
2.1
[.083]
3.0
[.118]
1.25
[.049]
0.35
[.014]
Ø 2.0
[.079]
1.9
[.075]
2.2
[.087]
1.0
[.039]
Ref.
1.05
[.041]
1.0
[.039]
4.0
[.157]
Ref.
Cut Out Prohibition Area
Ref.
Ref.
Ref.
Ref.
0.6
[.024]
Style Mates with UMCC Mated Height Description Part Number
Connector Type (H)
AII / III 2.00–2.50 UMCC PCB Receptacle, 2500 Pc Reel 1566230-1
.079–.098
AII / III 2.00–2.50 UMCC PCB Receptacle, 500 Pc Bag 1566230-2
.079–.098
Recommended PC Board Layout
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Standard Double Ended
Cable Assemblies
Printed
Circuit Board
H Max.
Receptacle
UMCC Connector Mated Height Cable Dia. Length Mates with Part Number
Type (H) L PCB Rcpt.
2.00 0.80 100.00 Style B 1750109-1
I.079 .031 3.937
2.00 0.80 200.00 Style B 1750109-2
.079 .031 7.874
2.00 0.80 100.00 Style A 1750108-1
II .079 .031 3.937
2.00 0.80 200.00 Style A 1750108-2
.079 .031 7.874
2.50 0.80 100.00 Style A 1750107-1
.098 .031 3.937
2.50 0.80 200.00 Style A 1750107-2
.098 .031 7.874
2.50 1.32 100.00 Style A 1750107-3
III .098 .052 3.937
2.50 1.32 200.00 Style A 1750107-4
.098 .052 7.874
2.50 1.37 100.00 Style A 1750107-5
.098 .054 3.937
2.50 1.37 200.00 Style A 1750107-6
.098 .054 7.874
L
4.0
[.157] Ref.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
225
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
226
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Interseries Cable
Assemblies
UMCC Connector Mated Height Cable Dia. Length Description Part Number
Type (H)
2.50 1.37 200.00 UMCC Plug to 1750110-2
.098 .054 7.874 FME Plug
2.50 1.37 200.00 UMCC Plug to 1750110-4
.098 .054 7.874 SMA Plug
III 2.50 1.37 200.00 UMCC Plug to 1750110-6
.098 .054 7.874 SMA Bulkhead Jack
2.50 1.37 200.00 UMCC Plug to 1750110-8
.098 .054 7.874 MCX Right-Angle Plug
2.50 1.37 200.00 UMCC Plug to 1-1750110-0
.098 .054 7.874 MMCX Right-Angle Plug
2.00 0.80 200.00 UMCC Plug to 1750110-7
II .079 .031 7.874 MCX Right-Angle Plug
2.00 0.80 200.00 UMCC Plug to 1750110-9
.079 .031 7.874 MMCX Right-Angle Plug
20.0
[.787]
200.0
[7.874]
Ref.
20.0
[.787]
200.0
[7.874]
Ref.
20.0
[.787]
200.0
[7.874]
Ref.
20.0
[.787]
200.0
[7.874] Ref.
20.0
[.787]
200.0
[7.874]
Ref.
UMCC to FME Plug
UMCC to SMA Plug
UMCC to MCX Right-Angle
Plug
UMCC to SMA Bulkhead Jack
UMCC to MMCX Right-Angle
Plug
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Adapters
Extraction Tool
Part Number 1775231-1
UMCC Connector Description Part Number
Type
UMCC Jack Receptacle to 1775228-1
ISMA Plug
UMCC Plug to SMA Jack 1775229-1
UMCC Jack Receptacle to 1775227-1
II / III SMA Plug
UMCC Plug to SMA Jack 1775230-1
14.0
[.551] 5.6
[.220]
10.0
[.393]
Ø 5.3
[.208]
Ø 2.6
[.102]
Ø 6.25
[.246]
1/4-36UNS
Part Number 1775229-1
14.0
[.551] 5.6
[.220]
10.0
[.393]
Ø 5.3
[.208]
Ø 2.5
[.098]
Ø 6.25
[.246]
1/4-36UNS
Part Number 1775230-1
10.60
[.417] 8.0
[.315] Hex.
1.10
[.043]
Ø 1.90
[.074]
Part Number 1775227-1
10.60
[.417] 8.0
[.315] Hex.
1.10
[.043]
Ø 2.00
[.078]
Part Number 1775228-1
100
[3.937]
30.00
[1.181]
4.50
[.177]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
227
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
228
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
UMCC — Ultraminiature Coax Connector and Cable Assembly Series (Continued)
Tape and Reel Packaging
Specifications
Standard Receptacles
Application Notes
Mating/Unmating —
Cable Plugs
Mating/Unmating
1. To mate the connectors,
insert the cable plug into
the SMT receptacle, mak-
ing sure the cable plug
is as vertical as possible
and the mating axis of
both connectors are
aligned. Do not insert on
an extreme angle.
2. To unmate the connectors,
insert the end portion of
the extraction tool under
the SMT receptacle con-
nector flanges and pull off
vertically in the direction
of the mating axis.
Permissible Load
Do not apply excessive
load to the cable after the
connectors are mated.
Please refer to the permissi-
ble loads indicated in the
figure to the right.
Receptacle
Pulling Tool
Step 1 Step 2
Printed Circuit Board
4N Max.
RF Coax Cabl
e
2N Max.
2N Max.
4.0 ± 0.1
[.157 ± .004]
2.0 ± 0.1
[.079 ± .004]
12.0
[.472]
1.75
[.069]
5.5
[.217]
8.0
[.315]
0.30
[.012]
1.60
[.063]
Ø 1.50
[.059] Center
Contact Ø 330
[12.99]
Ø 13.0
[.512]
1.40
[.055]
Dimensions Reel (2500 Pieces/Reel)
Soldering Profile —
SMT Receptacle
Recommended Temperature
Profile (Reference)
1. The preferred technique
for mounting the SMT
Receptacle package is to
reflow solder the device
onto a PCB (Printed
Circuit Board).
2. The maximum temperature
for the lead of PCB surface
does not exceed 240°C.
3. The right reflow soldering
profile is for reference and
will modify under individ-
ual different conditions.
Hand Soldering (Reference only)
1. Soldering iron: The
maximum temperature
is 240°C.
2. Soldering period: within
5 seconds.
Dimensions of Taping
Heating peak
240°C – 3 seconds
(130 to 165°C)
Preheating 183°C
Within 2 minutes
40 to 50
seconds
TIME
(°C)
260
240
220
200
180
160
140
120
100
80
TEMPERATURE
COAXICON Series Mobile Phone Switching Coax Connectors
Product Facts
■Able to switch RF signal
from internal to external
antenna
■SMD component for
standard pick & place
■Up to 2.4 GHz
■Up to 30,000 life cycles
■High radial and axial
tolerance capture
■Low insertion loss
■Right-angle cable plug with
floating for alignment
tolerance capture
■Application in handsets
Product Specification
108-71000
Technical Features
Impedance — 50 Ohms
Operating Temperature —
–40°C to +85°C
Radial Tolerance Capture —
±1.0 [.039] (except for 3.5 [.138] height)
Axial Tolerance Capture — 0.6 [.024]
Plating — Outer shell and center
contact are gold plated
Short Stamped Contact —
Selective gold plating
Long Stamp Contact (switch) —
Full gold plating with ink barrier
Insertion Loss — 0.30 dB max.
at 2 GHz
Isolation — 26 dB min. at 2 GHz
VSWR — 1.15:1 at 1 GHz, below
1.20:1 at 2 GHz
Mated Insertion Loss (after life
cycle testing) — Below 0.30 dB at
1 GHz, below 0.45 dB at 2 GHz
Unmated Insertion Loss (after life
cycle testing) — Below 0.20 dB at
1 GHz, below 0.35 dB at 2 GHz
Packaging on reels for SMD.
For more details, refer to the product
specification.
The Tyco Electronics SMD
mobile phone connector
system offers a low-cost
and effective solution to
passive switching between
an internal and external
phone antenna. When
implemented in a cradle kit,
the connector helps to
make possible hands-free
operation of the mobile
phone within a vehicle,
enhancing safety and per-
mitting compliance with a
growing body of legislation.
Connection to the external
antenna also enhances
signal gain and clarity.
The connector design
accommodates gross mis-
alignment between the
phone and cradle, which is
extremely important when
blindmating is necessary.
The Tyco Electronics switch-
ing coax connector system
meets all performance
objectives, including up to
30,000 connect/disconnect
and switching cycles over
the connector’s life.
Figure 1 — System Configuration Figure 2 — System Configuration
229
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
230
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Right-Angle Cable Plugs
Note: Hex Crimp Dim. 3.25 [.128]
L1
A
L2
D
F
RG/U Dimensions Single Packed Bulk Packed
Cable ADFL1L2
Part No. Part No.
5x5 Square 3.4 6.9 15.6 10.9 619028-2 5-619028-2
.134 .272 .614 .429
5x5 Square 3.4 9.6 15.6 10.9 619028-4 5-619028-4
.134 .378 .614 .429
6.0 3.4 6.9 15.8 10.9 619041-2 5-619041-2
RG 174 .236 .134 .272 .622 .429
6.0 3.4 9.6 15.8 10.9 619041-4 5-619041-4
.236 .134 .378 .622 .429
6.0 3.4 6.9 20.3 11.0 619078-1 5-619078-3
.236 .134 .272 .799 .433
6.0 3.4 9.6 20.3 11.0 619078-2 5-619078-4
.236 .134 .378 .799 .433
SMD Switching Jacks
H
D
L
l
Dimensions Diameter Part No.
HL lD
6.0 8.0 3.2 5.4 619061-1
.236 .315 .126 .213
4.5 8.0 3.2 5.4 619062-1
.177 .315 .126 .213
3.5 8.0 3.2 5.4 619072-1
.137 .315 .126 .213
Other models upon request.
For all dimensions, stencil and PCB recommended layout, see customer
drawing.
*Dim. lis the width of the connector on the PCB.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Switching SMD Jack
Low Profile
Part Number 619061-1,
Part Number 619062-1, and
Part Number 619072-1
2.70 ± 0.25
[.106 ± .010]
0.80 ± 0.05
[.031 ± .002]
8.00 ± 0.20
[.315 ± .008]
3.10 ± 0.10
[.122 ± .004]
2.40 ± 0.10
[.094 ± .004]
2.10 ± 0.10
[.083 ± .004]
0.42 ± 0.08
[.017 ± .003]
A
Ø 5.40
[.213]
0.20 ± 0.07
[.008 ± .003]
Y
A
A
Section A-A
Detail YDetail X
Ø 5.10
[.201]
Ø 5.00
[.197]
Ø 0.60
[.024]
4.30 ± 0.10
[.169 ± .004]
3.20 ± 0.10
[.126 ± .004]
1.70
[.067]
3.70 ± 0.10
[.146 ± .004]
3.80 ± 0.10
[.150 ± .004]
0.10 ± 0.020
[.004 ± .0008]
Outer Shell
Center Contact
Dielectric
Spring
Second
Signal
Contact
+ 0.00
– 0.05
+ .000
– .002
Ø 3.40
[.134 ]
3.10 ± 0.05
[.122 ± .002]
Recommended PCB Layout
0.90 ± 0.05
[.035 ± .002]
3.65 ± 0.05
[.144 ± .002]
R 2.70 ± 0.05
[.106 ± .002]
3.05 ± 0.05
[.120 ± .002]
2.70 ± 0.10
[.106 ± .004]
2.40 ± 0.10
[.094 ± .004]
Ground
Ground With
Solder Stop Mask
Signal With
Solder Stop Mas
k
Area Without
Trace
Signal
+ 0.10
– 0.00
+ .004
– .000
R 1.50
[.059 ]
+ 0.080
– 0.070
+ .0031
– .0028
4.58
[.180 ]
+ 0.080
– 0.070
+ .0031
– .0028
3.97
[.156 ]
Plating Dim. A Part No.
Gold 6.00 ± 0.10 619061-1
.236 ± .004
Gold 4.50 ± 0.10 619062-1
.177 ± .004
Gold 3.50 ± 0.10 619072-1
.138 ± .004
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
231
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
232
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Switching SMD Jack
ESD Protected
Part Number 619133-3
Plating — Gold
2.35
[.093]
2.45
[.096]
4.60 ± 0.30
[.181 ± .012]
3.70 ± 0.25
[.146 ± .010]
R 1.40
[.055]
Max.
1.64
[.065]
3.20
[.126]
0.80
[.031]
6.30 ± 0.10
[.248 ± .004]
Ø 5.40 ± 0.10
[.213 ± .004]
0.25 ± 0.10
[.010 ± .004]
7.00
[.276]
8.00
[.315]
Center
Contact
Dielectric
Spring
Spring
Contact
Second
Signal
Outer Shell
0.50
[.020]
A
A
Section A-A
Recommended PCB Layout
0.90 ± 0.05
[.035 ± .002]
3.65 ± 0.05
[.144 ± .002]
3.05 ± 0.05
[.120 ± .002]
2.70 ± 0.10
[.106 ± .004]
2.40 ± 0.10
[.094 ± .004]
Ground
Ground With
Solder Stop Mask
Signal With
Solder Stop Mas
k
Area Without
Track
Signal
+ 0.10
– 0.00
+ .004
– .000
R 1.50
[.059 ]
+ 0.05
– 0.00
+ .002
– .000
R 2.70
[.106 ]
+ 0.080
– 0.070
+ .0031
– .0028
4.58
[.180 ]
+ 0.05
– 0.00
+ .002
– .000
3.10
[.122 ]
+ 0.080
– 0.070
+ .0031
– .0028
3.97
[.156 ]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Switching SMD Jack
ESD Protected
4.1mm Height
Part Number 619201-1*
Plating — Gold
3.45
[.136]
4.10
[.161]
Mated Position Unmated Position
3.88
[.153]
1.07
[.042]
0.70
[.028]
45°
0.70
[.028]
4 Plcs.
Ø 5.00
[.197]
1.80
[.071]
Spring Contact
Center Contact Outer Shell
Dielectric 1.80 ± 0.20
[.071 ± .008]
Ø 4.40 ± 0.20
[.173 ± .008]
Ø 5.80 ± 0.20
[.228 ± .008]
R 0.28
[.011] Ø 0.56
[.022]
+ 0.00
– 0.05
+ .000
– .002
Ø 3.40
[.134 ]
+ 0.15
– 0.10
+ .006
– .004
1.00
[.039 ]
1.60
[.063]
1.50
[.059]
1.00
[.039]
2.50
[.098]
5.00
[.197]
Recommended PCB Layout
Ø 4.35
[.171]
Ø 6.20
[.244]
0.80
[.031]
Switching SMD Jack Mid
Part Number 619075-1
Plating — Gold
5.50 ± 0.10
[.217 ± .004]
Ø 5.00 ± 0.10
[.197 ± .004]
R 0.30
[.012]
Spring Contact
Dielectric,
Unplated
Dielectric,
Plated
2.90
[.114]
0.40
[.016]
B B
D
Section B-B
3.50
[.138] 2.80
[.110]
1.00
[.039] 0.20
[.008]
60°
38°
Ø 4.20
[.165]
Ø 2.50
[.098]
0.40
[.016]
D
1.85
[.073]
1.90
[.075]
0.70
[.028]
0.80
[.031]
R 0.20
[.008]
Section D-D
R 1.75
[.069]
R 2.50
[.098]
1.60
[.063]
0.10 ± 0.02
[.039 ± .001]
2.40 ± 0.10
[.094 ± .004]
0.50 ± 0.05
[.020 ± .002]
0.40
[.016] Sq.
0.70
[.028]
1.25
[.049]
*Mirrored Version of Part Number 619201-1 Also Available Under Part Number 619231-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
233
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
234
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Nano Switching Coax
Part Number 619213-1
Plating — Gold
0.45
[.018]
0.60
[.024]
1.45
[.057]
Ø 1.92 ± 0.15
[.076 ± .006]
Ø 0.55
[.022]
1.70 ± 0.15
[.067 ± .006]
2.70 ± 0.15
[.106 ± .006]
2.70 ± 0.15
[.106 ± .006]
3.00 ± 0.05
[.118 ± .002]
Recommended PCB La
y
out
0.55 ± 0.05
[.022 ± .002]
1.55 ± 0.05
[.061 ± .002]
2.65 ± 0.05
[.104 ± .002]
2.90
[.114]
1.25 ± 0.05
[.049 ± .002]
0.30 ± 0.05
[.012 ± .002]
1.05 ± 0.05
[.041 ± .002]
1.25 ± 0.05
[.049 ± .002]
Right-Angle Cable Plug For
Micro Switching Coax
Connector Cable RG 316/
RG 174
Part Number 619211-2
Plating — Gold
5.10
[.201] Sq.
Lid
Shell Angle
Ferrule
Center
Contact
Snap Spring
Outer
Shell
Dielectric
4.80
[.189]
Ø 3.50
[.138]
7.00
[.276]
10.40
[.409]
2.00
[.079]
8.10
[.319]
2.20
[.087]
Ø 3.00
[.118] Ø 0.70
[.028]
Micro Switching Coax
Connector
Part Number 619196-1
Plating — Gold
3.00
[.118]
1.30
[.051]
3.00 ± 0.20
[.118 ± .008]
2.50
[.098]
1.54
[.061]
1.80
[.071]
0.80
[.031]
Ø 3.00
[.118]
Ø 1.70
[.067]
Section A-A
A
A
Ø 0.80
[.031] Dielectric,
Plated
Dielectric,
Unplated
Contact Spring
3.40
[.134]
Recommended PCB Layout
1.70
[.067]
0.70
[.028]
Output
Signal
Ground
Input Signa
l
3.20
[.126]
1.40
[.055]
0.90
[.035]
1.00
[.039]
0.70
[.028]
Copper
Clearance
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Protected Front Contact
Cable Plug
Part Number 5-619028-1,
Part Number 5-619078-1,
and Part Number 5-619137-1
Ø 9.60
[.378]
Lid Spring Support
Washer
Shell Angle
Ferrule
Safety
Ring
Center
Contact Outer
Shell
Dielectric
Spring
3.40
[.134] AØ 9.60
[.378]
7.35
[.289]
5.10
[.201]
Protected Front Contact
Cable Plug With
Cylindrical Interface
Part Number 5-619076-2
Plating — Gold
Bulk packaging.
5.00 ± 0.25
[.197 ± .010]
Ø 3.50 ± 0.025
[.138 ± .0010]
Ø 9.60
[.378]
Lid
Spring Support
Washer
Shell Angle
Ferrule
Safety
Ring
Dielectric
Center
Contact
Outer
Shell
Spring
7.35
[.289]
5.10
[.201]
15.60
[.614] 10.92
[.430]
6.62
[.261]
5.67
[.223]
+ 0.110
– 0.010
+ .0043
– .0004
Ø 2.50
[.098 ]
Ø 10.00
[.394]
Ø 6.50
[.256]
Dielectric
1/4" - 36 UNS-2A
35.00
[1.378]
22.00
[.866]
Outer
Shell
Dielectric
Safety Ring
Center Contac
t
7.00
[.276]
13.00
[.512]
6.62
[.261]
5.47
[.215]
Ø 3.40
[.134]
Cable Plug/
SMA Jack Adapter
Part Number 619052-1
Plating — Gold
Ø 10.00
[.394]
Ø 6.50
[.256]
Dielectric
1/4" - 36 UNS-2A
35.00
[1.378]
22.00
[.866]
Outer
Shell
Dielectric
Safety Ring
Center Contac
t
7.00
[.276]
13.00
[.512]
6.62
[.261]
5.47
[.215]
Ø 3.40
[.134]
Ø 8.18
[.322]
Cable Plug/
SMA Jack Adapter
With Conical Flange
Part Number 619068-1
Plating — Gold
Plating Dim. A Part No.
Gold 10.92 5-619028-1
.430
Gold 14.90 5-619078-1
.587
Gold 10.92 *5-619137-1*
.430
Bulk packaging.
*Outer conductor without slot.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
235
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
236
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
COAXICON Series Mobile Phone Switching Coax Connectors (Continued)
Adapter SMA Jack —
MSC Test Plug
With Conical Flange
Part Number 619210-1
Plating — Gold
Ø 10.00
[.394]
Ø 6.50
[.256]
Dielectric 20°
1/4" - 36 UNS-2A
22.00
[.866]
Outer
Shell
Dielectric
Center Contac
t
7.00
[.276]
2.90
[.114]
2.20
[.087]
11.40
[.449]
Ø 3.00
[.118]
Ø 0.70
[.028]
R 0.35
[.014]
Ø 8.18
[.322]
+ 0.17
– 0.12
+ .007
– .005
13.00
[.512 ]
Adapter SMA Jack —
NSC Test Plug With
Two-Hole Flange
Part Number 619214-1
Plating — Gold
+ 0.10
– 0.00
+ .004
– .000
Ø 2.60
[.102
2 Plcs.
]
8.00 ± 0.10
[.314 ± .004]
A
A
14.00 ± 0.10
[.551 ± .004]
Ø 20.00 ± 0.10
[.787 ± .004]
Ø 3.40 ± 0.10
[.134 ± .004]
Center
Contact
Pin
1.00 ± 0.10
[.039 ± .004]
28.20 ± 0.30
[1.110 ± .012]
Ø 7.00 ± 0.10
[.276 ± .004]
Ø 7.50 ± 0.20
[.295 ± .008]
Ø 5.00 ± 0.10
[.197 ± .004]
6.00 ± 0.10
[.236 ± .004]
18.70 ± 0.20
[.736 ± .008]
8.70 ± 0.20
[.343 ± .008]
Dielectric
Flange
Center
Contact
Female
Dielectric
Outer
Shell
Ø 10.00
[.394]
Ø 6.50
[.256]
Dielectric
1/4" - 36 UNS-2A
35.00
[1.378]
22.00
[.866]
Center Contact
Outer Shell
7.00
[.276]
13.00
[.512]
Ø 0.60
[.024]
Ø 5.40
[.213]
+ 0.020
– 0.080
+ .0008
– .0031
Ø 3.40
[.134 ]
Switching SMD Jack/
SMA Jack Adapter
Part Number 619053-1
Plating — Gold
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
237
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Quick Snap Stripline (QSL) Coaxial Connector
Coaxial Cable
Displacement Interface
■Low profile
■Highly reliable ruggedized
interface
■Surface mount technology
■Excellent price-to-
performance ratio
■Platform expandable to
include multi-port versions
and other customization
Product Facts
■Surface mount compatible
■RoHS compliant (lead-free
SMT process [260° C]
compatible)
■PCI / PCI Express
compatible
■Designed for RG 174 &
RG 316 Cable, and easily
adaptable to other cable
types
■Overall Height < 10 mm
■Can be packaged to meet
IP67 Sealing
■10mm x 10.6mm max.
footprint (w/o panel
extension)
■Cost effective solution to
standard screw machine
RF connectors
Applications
■PCI, Mini PCI, PCI Express
■Mobile Antenna/GPS/Radio
Systems/RFID
■PDA / PCS / Cellular
Handset applications
■Wireless Communications
systems
■Satellite Communications,
Broadcast, Multimedia
■Automotive Telematics
Specifications
Characteristic Impedance —
50 Ohms
Frequency Range — Dc to 6 GHz
VSWR — 1.3 Max to 3 GHz,
1.5 Max to 6 GHz
Rated Voltage — 60 VAC rms
Dielectric Withstanding Voltage —
800 VAC, 50 Hz (at sea level)
Insulation Resistance —
100 Megohms min
Operating Temperature —
–40 to +125°C
Engagement Force — < 30 N
Disengagement Force — < 20 N
Cable Retention — 110 N
Durability — 250 cycles
10.00
[.394]
Max.
10.00
[.394]
13.50
[.531] Max.
Max.
Surface Mount Jack Receptacle
8.00
[.315]
Max.
8.20
[.323]
24.00
[.945]
12.00
[.472]
Max.
Max.
RG-174
Cable Plug
Part Number
1274794-1
Part Number
1274795-1
Related Product Data
Product Specification — 108-2224
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
PCI, PCI EXPRESS are trademarks of
PCI SIG.
238
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
DIN Inserts
Coaxial inserts according
to CECC 22 330 and high-
current inserts (CECC spec-
ification under preparation)
can be used in conjunction
with a DIN 41612 style M
contact base (CECC 75
101-801), SIEDECON,
and Z-PACK 2mm HM
connectors.
Coaxial inserts have a con-
tact system based on the
pin-socket principle with the
same dimensions as the
Series 1.0/2.3 coaxial con-
nectors and are plug-com-
patible. The product family
is represented by various
50Ωand 75Ωstyles that can
be used far into the GHz
range. The high mounting
density (pitch between adja-
cent contacts starting at 7.5
mm) and installation into the
contact base, by means of
a “snap-in” lock, make the
inserts particularly well
suited for applications.
Due to the centering,
– coaxial plugs are
installed in contact bases
with audio-frequency
(AF) female contacts
– coaxial jacks are
installed in contact bases
with AF male contacts.
The high-quality materials
used with coaxial inserts
ensure a high grade of
service even in an industrial
atmosphere.
Technical Data
Electrical and mechanical
characteristics of coaxial
inserts in accordance with DIN
41626 Part 2 and CECC 22 330
Characteristic Impedance —
50/75 Ω
Frequency Range — up to 2 GHz
Reflection Factor Up To 2 GHz 1—
≤0.10
Insulation Resistance —
Initial value — ≥1 GΩ
After stressing — ≥200 MΩ
Screening Effectiveness — ≥70 dB
Inner Conductor Contact Resistance
After Stressing — ≤10 mΩ
Outer Conductor Continuity After
Stressing — ≤7.5 mΩ
Voltage Proof 2—
Flexible Cables (RG 316)
At sea level — 750 V, 50 Hz
At 20 km altitude — 150 V, 50 Hz
Working Voltage 2—
Flexible Cables (RG 316)
At sea level — 350 V, 50 Hz
At 20 km altitude — 65 V, 50 Hz
Service Life — 500 cycles
Climatic Category — 55/125/56
Notes
1 Guideline dimensions, depending
on cable type and connector style.
2 Some cable types suitable for use
with these connectors have lower
characteristic values than speci-
fied here.
Product Facts
■Meets requirements of DIN
41626 and CECC 22330
■Suitable for DIN 41612 Type
M Connectors (Eurocard),
Siedecon, and Z-PACK 2mm
HM Connectors
■Meets DIN Performance
Level II
■Crimp termination for inner
and outer conductors (cable
mount only) eliminates the
need for solder
■Right-angle and vertical
style board mount pin and
socket contacts
■Board mount product avail-
able with both solder and
compliant tails
■Straight cable mount pin
and socket contacts for
RG 316, and RG 179 cable
■Contact impedance of 50
and 75 ohms for cable
mount and 50 ohms for
board mount
DIN Inserts (Continued)
Coaxial Inserts,
50 Ohm
Z-PACK 2mm
HM Connectors
Vertical PC Board Mount, Compliant
5.50
[.216]
Min.
12.21
[.480] Ref.
4.75 –0.03
[.187 –.001]
4.15 –0.012
[.163 –.0004]
1.15 +0.30
[.045 +.012]
5.10
[.200] Max.
Sq.
45°0'
Typ.
90°0'
Typ.
Typ.
1.00 ±0.05
[.039 ±.002]
5.08 ±0.05
[.200 ±.002]
45°0'
Typ.
90°0'
Typ.
Typ.
1.00 ±0.05
[.039 ±.002]
5.08 ±0.05
[.200 ±.002]
Right-Angle PC Board Mount, Compliant
17.75
[.700] Ref.
0.03
4.75
.187
0.09
.001
.004
4.20 +0.075
[.165 +.003]4.00 ±0.10
[.157 ±.004]
5.35 –0.30
[.216 –.012]
7.00 ±0.10
[.275 ±.004]
6.10
[.240]
Max.
Sq.
Recommended
PC Board Layout
Type Housing Type Application Tooling Part No.
Vertical PCB Socket, Z-PACK 2mm 904800-1 5148385-1
Compliant HM Male
Rt. Angle PCB Pin, Z-PACK 2mm 904805-1 5148386-1
Compliant HM Female 904804-1 Support Anvil
Recommended
PC Board Layout
Coaxial Inserts to
SMA Adapters Coaxial Insert Plug to SMA Jack
Coaxial Insert Socket to SMA Jack
19.1
[.755]Max.
7.92 ± 0.12
[.312 ± .005]
Hex.
7.92
[.312] Hex.
Part No.
1274192-1
Part No.
1274191-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
239
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
240
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
DIN Inserts (Continued)
Dim A Ø Max. Cable Type Width Across Flats Part No.
of Hex Profile
18.7 2.6 RG 316 (50 Ω)3.2 1393668-4
.736 .102 .126
22.3 2.6 RG 316 (50 Ω)3.2 1393668-8
.878 .102 .126
18.7 3.0 RD 316 (50 Ω)3.6 1393668-7
.736 .118 .142
18.7 2.67 RG 179 (75 Ω)3.2 2-1393668-4
.736 .105 .126
A9.6
[.378]
13.1
[.516]
Ø 6.0
[.236]
Ø 4.05
[.159]
A9.35
[.368]
13.1
[.516]
Ø 6.0
[.236] Ø 4.75
[.187]
Dim A Ø Max. Cable Type Width Across Flats Part No.
of Hex Profile
2.6 RG 316 (50 Ω)3.2 1-1393668-2
19 .102
.126
.748 2.67 RG 179 (75 Ω)
.105
22.4 2.67 RG 179 (75 Ω)3.2 2-1393668-8
.882 .105 .126
24.0 2.67 RG 179 (75 Ω)3.2 3-1393668-6
.945 .105 .126
Ø Max. Cable Type Width Across Flats Part No.
of Hex Profile
2.6 RG 316 (50 Ω)3.2 1392019-1
.102 .126
2.67 RG 179 (75 Ω)3.2 3-1393668-0
.105 .126
Ø Max. Cable Type Width Across Flats Part No.
of Hex Profile
2.6 RG 316 (50 Ω)3.2 1392020-1
.102 .126
2.67 RG 179 (75 Ω)3.2 3-1393668-4
.105 .126
Ø 5.8
[.228]
23.9
[.941]
9.6
[.378]
4.05
[.159]
Ø 5.8
[.228]
23.9
[.941]
9.35
[.368]
4.75
[.187]
Coaxial Inserts (50 Ω/75 Ω)
Bulkhead Cable Jack for
male connectors
Bulkhead Cable Jack for
female connectors
Right-Angle Bulkhead Jack for
male connectors
Right-Angle Bulkhead Plug for
female connectors
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
DIN Inserts (Continued)
Bulkhead Plug, PC Board
connection for DIN 41612 M
female connectors
Coaxial Inserts (50 Ω/75 Ω)(Continued)
9.35
[.368]
17.9
[.705]
5.08
[.200] Ø 4.75
[.187]
Ø 1.0
[.039] 2.54
[0.10]
Recommended
Mounting Hole
Pitch
Ø 1.0
[.039] 2.54
[0.10]
Pitch
Part No.
1-1393662-2
Right-Angle Bulkhead Plug,
PC Board for SIEDECON
female connectors
Part No.
1-1393662-4
Right-Angle Bulkhead Jack,
PC Board for DIN 41612 M
male connectors
5.08
[.200]
17.9
[.705]
3.0
[.118]
6.9
[.272]
9.6
[.378] 4.05
[.159]
5.08
[.200]
17.8
[.701]
3.0
[.118]
6.9
[.272]
9.35
[.368] Ø 4.75
[.187]
Recommended Mounting holes for
Part No. 1-1393662-2 and 1-1393662-4
Part No.
1-1393662-0
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
241
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
242
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Size 8 Contacts
Performance Characteristics
Frequency Range—0 to 500 MHz
Operating Voltage, Max.—
275 vac rms @ sea level
Termination Resistance, Max.—
Center Contact—6.0 milliohms
Outer Contact—3.0 milliohms
Insulation Resistance, Min. —
5,000 megohms @ 500 vdc
Dielectric Withstanding Voltage—
Sea Level—800 Volts rms
30,000 ft [9,144 m]—525 volts rms
70,000 ft [21,336m]—275 volts rms
VSWR to 500MHz, Max.
Pin/Socket VSWR
Straight/Straight 1.30
Right-Angle/Straight 1.35
Right-Angle/Right-Angle 1.40
RF Crosstalk—90dB @ 5-500 MHz
Mating Force, Max. —4.0 lb
[17.8 N]
Unmating Force, Min. —2.0 oz
[0.556 N]
Contact Retention —20 lb [89 N]
Contact Durability —500 cycles
Cable Force
RG/U lb [N]
316, 188, 174, 20 89
179, 179A, 179B
188-type 35 155.8
Double-Braid
142, 142A, 142B 50 222.5
Operating Temperature —
55°C to +125°C
Thermal Shock —55°C to +125°C per
MIL-STD-1344, Method 1003, Cond. A
Physical Shock —50 G’s per MIL-
STD-1344, Method 2004, Cond. A
Vibration —MIL-STD-1344, Method
2005, Cond. II
Moisture Resistance —240 hours
per MIL-STD-1344, Method 1002,
Cond. II
Salt Fog —48 hours per MIL-STD-
1344, Method 1001, Cond. B
Extraction Tool Numbers
Subminiature D Housings —
58095-1 (AMPLIMITE)
AMP-HDI Housings—58095-2
Material
Brass —per QQ-B-626 and MIL-C-50
Phosphor Bronze —per QQ-B-750
Beryllium Copper —per QQ-C-530
TEFLON—per MIL-P-19468
Nylon—per MIL-M-20693
Finish
Bright Tin Plating—per ASTM-B-571
Copper Plating —per MIL-C-14550
Gold Plating —per MIL-G-45204
Nickel Plating —per QQ-N-290
Straight Contacts
Pin Socket
A
Max.
B
Dia. Max.
Alignment Ring
for use in
Subminiature D
housing only
A
Max.
B
Dia.
Max.
Shell Dimensions Die 50 Ohm Non-Impedance Matched
RG/Cable Type AB
Insert* Pin Socket Pin Socket
178, 178A,Brass 24.13 5.94 59993-1 — — 5228618-5 5228596-5
178B,196, 196A .950 .234
174, 316, Brass 24.28 5.94 59993-1 5221980-1 —5228618-1 5228596-1
188, 188A .956 .234
179, 179A,
179B, 187, Brass 24.28 5.94 59993-1 — — 5228618-2 5228596-2
187A, 161, .956 .234
BELDEN 9221
174, 316, 188, Brass 24.28 5.94 59993-1 — — 5228618-3 5228596-3
Double Braid .956 .234
142, 142A, 142B, Brass 27.43 6.48 58212-1 — 5221981-2 5228618-4 5228596-4
400, BELDEN 9246 1.08 .255
*For hand tool 69710-1 or pneumatic tool 69365-8.
Note: Non-Impedance Matched and 50 Ohm are not intermateable.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
BELDEN is a trademark of Belden Wire
and Cable Company.
TEFLON is a trademark of E.I. Dupont de
Nemours and Company.
Size 8 Contacts (Continued)
PC Board Mount Contacts
Recommended PC Board Layout
Contact Part No.
Type Non-Impedance
Matched
Right-Angle 5221162-1
Socket Contact
1.02 ±0.08
[.040 ±.003]
(5 Holes)
Dia.
5.08 ±0.08
[.200 ±.003]
2.54 ±0.08
[.100 ±.003]
5.08 ±0.08
[.200 ±.003]
2.54 ±0.08
[.100 ±.003]
Right-Angle Socket Contact
17.58
[.692]
6.50
[.256] 11.33
[.446]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
243
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
244
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
COAXICON Contacts
Product Facts
■Tyco Electronics provides
a variety of contacts for
coaxial connectors
■Contacts are available in
a range of sizes that may
be used with the various
types of coaxial cable on
the market
■COAXICON contacts are of
the crimp, snap-in type and
are available in the follow-
ing designs: Miniature
Contacts, Subminiature
Contacts and Size 8 Contacts
Miniature Contacts are
designed for high density
multiple circuit connector
applications. A wide range
of cable sizes is accommo-
dated by using three sizes
of outer shell termination
ends and three sizes of
contacts.
Subminiature Contacts
are used in high density
applications and are ideal
for mixing coaxial and other
styles of pin and socket
contacts in the same con-
nector housing.
Size 8 Contacts are com-
patible with industry stan-
dard size 8 connectors
such as Subminiature D
and AMP-HDI connector
housings. Straight and
right-angle styles, as well
as pc board versions for
AMP-HDI connectors are
available.
Miniature Contacts
Inner Dielectric—Polypropylene,
nylon, or polymethylpentene, general
purpose
Retention Spring —Stainless steel
per QQ-S-766
Ferrule —Copper per QQ-C-576
Performance Characteristics
Insulation Resistance —5000
megohms min
Dielectric Withstanding Voltage—
1,000 volts rms for 1 minute
Contact Resistance —2.0 milliohms
@ 1 ampere
Low-Level Conductivity —10 milli-
volts DC min.
VSWR—1.3 to 1.0 @ 1,000 MHz max.
Cable Retention —
RG/U Retention
Cable lbs [N]
58C 50 [222]
188A 30 [133]
180B 28 [125]
195A 16 [71]
Durability—500 cycles @ 10 cycles
per minute max.
Vibration —2 hrs. per MIL-STD-202,
Method 201
Shock —50 G’s per MIL-Std-202,
Method 213, Cond. G
Temperature Cycling —5 cycles per
MIL-STD-202, Method 102, Cond C.
Temperature Range —-55°C to
+125°C
Test Method for Electronic and
Electrical Component Parts —
MIL-STD-202
Material
Outer Shell —Brass per MIL-C-50
Center Conductor —Brass per
QQ-B-626, or Beryllium copper
per QQ-C-533
Finish
Outer Shell, Center Conductor —
0.00076 [.000030] gold over 0.00076
[.000030] nickel
Retention Spring —Nickel per
QQ-N-290
Ferrule —Bright tin per MIL-T-10727
Note:
A ferrule and retention spring
(201142-2) are required for each pin
and socket.
Extraction Tool No. 305183-8
Die Insert for Tools: Part Numbers
RG/U Cable Ferrule Integral Die PRO-CRIMPER Hand Tool 69710-1
No. Hand Tool Pneu. 69365-2, Pin Socket
69365-32
316, 188, 188A 328666-X —— 69227-2 201143-5 201144-5
174
179, 179A, 179B
161, 187, 187A 328666-X —— 69227-2 201143-1 201144-1
Belden 9221
188 Double Braid 221848-3 58290-1 — 69227-2 201143-5 201144-5
316 Double Braid
122 328664-X 45639-2 91912-3 69222-2 201145-1 —
180, 180A, 180B
195, 195A, 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2
21-597
Belden 8218 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2
58, 58A, 58B, 58C 328663-X 45740-2 — 69220-2 201145-4 201146-4
141 330478-X 69248-4 — 69315-4 201145-4 201146-4
55, 55A, 55B, 223
124, 140, 210
62, 62A, 62B 329006-X —— 69675-1 201097-1* 201098-1*
59, 59A, 59B
Twisted Pair
24-22 AWG [0.2-0.4 mm2]328666-X 91912-4 — 69672-X 201143-5 201144-5
(Stranded)1
Shielded Wire 328663-X 45740-2 — 69220-2 201145-4 201146-4
22, NAS-702, Class B
Brand Rex T5788A 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2
26 AWG [0.12-0.155 mm2]3
*These contacts are for use in the 4-position G Series connector modules only.
1Maximum insulation diameter–2.92 [.115] (two wires combined).
2Includes bench mount and foot control; requires Manual Take-Up Attachment No. 69689.
3Dielectric O.D.–2.69 [.106] max.; Cable O.D.–4.06 [.160].
Ferrules
Pin Socket
Retention Springs
Part No. 201142-2
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
245
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
246
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Miniature PC Board Sockets
Material
Shell and Center Contact —Brass
per MIL-C-50 and QQ-B-626
Dielectric —Polypropylene, or
Polymethylpentene, general purpose
Finish
Center Contact —0.00076 [.000030]
gold over copper
Shell —Gold plated per MIL-G-45204
Performance Characteristics
Dielectric Withstanding Voltage—
1,000 volts, rms
Impedance —Non-constant
Operating Temperature Range —
-55°C to +85°C
15.24
[.600]
2.54
[.100] 12.7
[.500]
2.54
[.100] 1.32 Dia.
[.052]
(5 Holes)
Recommended
Mounting Hole Layout
Spring Latch
Shell
Center Conductor
Locking Latch
2.54 Ref.
[.100]
4.52 Dia.
[.178]
Ref.
Spring
Latch
2.54 Ref.
[.100]
0.36 Ref.
[.014]
1.27 Typ.
[.050]
12.7
[.500] 2.54
[.100]
17.78
[.700]
1.02 Dia.
[.040]
A
B
6.23
[.245]
Type PC Board Retention Dimensions Part No.
Thickness lb. [N] A B
Spring Latch 1.57 1.25 5.56 9.07 3.18 50084-1
.062 .357 .125
Spring Latch 3.18 1.25 5.56 7.49 4.75 50095-1
.125 .295 .187
Locking Latch 3.18 7.25 31.167.49 4.75 50105-1
.125 .295 .187
Locking Latch 1.57 7.25 31.169.07 3.18 50107-1
.062 .357 .125
Note: For mateable Miniature Contacts, see page 245.
Locking Latch
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Subminiature PC Board Sockets
Material
Shell and Center Contact —Brass
per MIL-C-50 and QQ-B-626
Dielectric —Polypropylene, or
polymethylpentene, general purpose
Finish
Center Contact —0.00076[.000030]
gold per MIL-G-45204 over copper per
MIL-C-14550
Shell —Gold
Performance Characteristics
Dielectric Withstanding Voltage—
600 volts, rms
Operating Temperature Range —
-55°C to +85°C
1.09 Dia.
[.043]
#57 Drill
(3 Holes)
10.16
[.400]
15.24
[.600]
Recommended
Mounting Hole Layout
Locking Latch
Shell
Center Conductor
Spring Latch
22.23 Max.
[.875]
Locking
Latch
1.47 [.058]
0.84±0.2
[.033±.008]10.16
[.400]
15.24
[.600]
0.84 Dia.
[.033]
4.52
[.178]
3.05 ±.0.2
[.120 ±.008]
Mating Subminiature
COAXICON Pins
These short Subminiature COAXICON
Pins are recommended for use with any
of the sockets listed above.
Note: Alignment springs are not
required for this application and are not
included with the pin assemblies.
Type PC Board Dim. Part No.
Thickness L
Spring Latch 1.57 2.54 226023-1
.062 .100
Locking Latch 1.57 2.54 226060-1
.062 .100
Integral Die Insert for Tools:
RG/U Ferrule Hand Tool 69710-1 Part No.
Cable No. Die Pneu. 69365-2,
Hand Tool 69365-3
174 1-332056-0 91911-3 69690-X 51563-8
316, 188, 188A
179, 179A, 179B 1-332056-0 91911-4 69690-1 51563-8
187, 187A
161 1-332056-0 69656-5 — 51563-8
A
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
247
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
248
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Selection Chart for Twisted Pairs and Shielded Wire
Die Insert
for Tools:
Wire Size Hand Tool Contact Part Numbers
Integral Die PRO-CRIMPER 69710-1 Multimate Short Socket Ferrule
AWG [mm2]Hand Tool Pneu. Tool Pin Pin
69365-2,
69365-3*
30 0.05 69656-2 — 69690-2 226537-3 51563-3 51565-3 1-332057-0
(Twisted Pair, Solid)
28 0.08-0.09 — 91911-3 69690-226537-3 51563-3 51565-3 1-332057-0
(Twisted Pair, Solid)
28 69690-1
(Twisted Pair, Stranded; 0.08-0.09 — 91911-4 or 226537-3 51563-3 51565-3 1-332057-0
7 str., .005 [0.13] Dia.) 69690-2
26
(Twisted Pair,
Solid or Stranded; 0.12-0.15 — 91911-3 69690-2 226537-3 51563-3 51565-3 1-332057-0
7 str., .0063 [0.16] Dia.)
26
(Shielded, 0.75 [1.91] 0.12-0.15 69656-3 — 69690-3 226537-1 —51565-1 1-332057-0
Max. O.D.)
*Includes bench mount and foot control.
Extraction Tool 305183
Note: A ferrule is required for each pin and socket.
Subminiature Contacts
Material
Outer Shell —Brass per MIL-C-50
Center Conductor —Beryllium
copper per QQ-C-533 (Pin);
Brass per QQ-B-626 (Socket)
Inner Dielectric—Polypropylene,
nylon, or polymethylpentene, general
purpose
Retention Spring —Stainless steel
per QQ-S-766
Ferrule —Copper per QQ-C-576
Finish
Outer Shell and Socket
Center Conductor —0.00076
[.000030] gold over 0.00127 [.000050]
nickel
Pin Center Conductor —0.00076
[.000030] gold over
0.00254 [.000100] copper
Ferrule —Bright tin per MIL-T-10727
A
Pin
Ferrule
16.51 Max.
[.650] Socket
Ferrule
A= Multimate Pin 25.65 [1.010]
Short Pin 22.66 [.892]
Selection Chart for Coaxial Cable
Integral Die Insert for Tools: Contact Part Numbers
RG/U Cable Die PRO-CRIMPER Hand Tool 69710-1
Hand Tool Pneu. Tool 69365-2, Multimate Short Socket Ferrule
69365-3* Pin Pin
178, 178A, 178B 69656-2 69690-2 226537-2 —51565-2 1-332057-0
196, 196A
196 69656-9 — 226537-2 —51565-2 1-225088-1
(Double Braid)
174, 316 —91911-3 69690 -226537-1 —51565-1 1-332056-0
188, 188A
179, 179A, 179B
187, 187A — 911911-4 69690-1 226537-1 —51565-1 1-332056-0
Belden 9221
RD-316 69656-7 — 226537-1 —51565-1 1-225088-3
187 69656-8 — 226537-1 —51565-1 1-225088-1
(Double Braid)
161 69656-5 — 226537-1 —51565-1 1-332056-0
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SIEMAX Connectors
Applications
■Multiplex Systems
■Base Stations
■High Density Systems
Product Facts
■Multi Coax Surface Mount
■Maximum packaging density
■Component placement on
both sides of PCB
■Fully automated assembly
(pick-and-place)
■Modular design
Technical Data
■Interface: Series 1.0/2.3
■Impedance: 75
■International specifications:
IEC 169-29 and CECC 22 230
■Frequency range up to 2 GHz
■Compact grid pitch 10
[0.39]
■Guaranteed coplanarity of
max. 0.1 [0.004]
■Integrated positioning pins
for manual placement
■Optional mechanical
securing
SIEMAX connectors com-
bine the benefits of surface
mount technology and mod-
ular design. This multi coax
connector is packaged in
tape-and-reel for automatic
placement, has optimum
solder joints and 100%
reflow suitability. This con-
nector is ideal for systems
requiring superior packag-
ing density because it can
be placed on both sides of
the printed circuit board.
The modular design pro-
vides flexibility in terms of
the number of poles offered
(two- or three-poles). It can
be stacked, enabling any
required configuration to
be produced. The SIEMAX
connector also allows the
use of any other connector
series, e.g. SMB, is resist-
ant to high temperatures,
and is robust, with reliably
sustained coplanarity.
For General Information
on Series 1.0/2.3 Connectors, see
Page 129.
249
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
250
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
SIEMAX Connectors, Series 1.0/2.3 (75 Ohm)
SIEMAX Connector, SMT
Right-Angle Jack, 2 Poles
12.10 ± 0.05
[.476 ± .002]
1.90 ± 0.05
[.075 ± .002]
3.00 ± 0.05
[.118 ± .002]
5.10 ± 0.05
[.201 ± .002]
2.00
[.079]
2.00
[.079]
2.00
[.079] x 7 =
2.00
[.079]
8.00
[.315]
x 4 =
14.00
[.551]
11.10 ± 0.05
[.437 ± .002]
17.50 ± 0.05
[.689 ± .002]
1.60 ± 0.05
[.063 ± .002]
+ 0.10
– 0.00
+ .004
– .000
Ø 1.40
[.055 ]
0.05 [.002] 10 Plcs.
0.05 [.002] 8 Plcs.
2.00 ± 0.05
[.079 ± .002]
2.80 ± 0.05
[.110 ± .002]
7.20 ± 0.05
[.283 ± .002]
13.00 ± 0.05
[.512 ± .002]
+ 0.10
– 0.00
+ .004
– .000
1.90
[.075 ]
24.0
[0.94]
6.5
[0.26]
Ø 4.15
[0.16]
18.0
[0.71]
10.0
[0.39]
PC Board Layout
Coupling type* Part No.
C, F 6-1393696-2
*For coupling type see DIN 1.0/2.3
Section.
12.10 ± 0.05
[.476 ± .002]
1.90 ± 0.05
[.075 ± .002]
4.40 ± 0.05
[.173 ± .002]
5.10 ± 0.05
[.201 ± .002]
2.00
[.079] 23 Plcs.
23 Plcs.
2.00
[.079]
2.00
[.079] x 12 =
2.00
[.079]
8.00
[.315]
x 4 =
24.00
[.945]
4.00
[.157]
Ø 2.50
[.098]
11.10 ± 0.05
[.437 ± .002]
27.50 ± 0.05
[1.083 ± .002]
1.60 ± 0.05
[.063 ± .002]
+ 0.10
– 0.00
+ .004
– .000
1.90
[.075 ]
+ 0.10
– 0.00
+ .004
– .000
1.90
[.075 ]
+ 0.10
– 0.00
+ .004
– .000
Ø 1.40
[.055 ]
+ 0.10
– 0.00
+ .004
– .000
1.20
[.047 ]
0.05 [.002] 10 Plcs.
0.05 [.002] 13 Plcs.
20.00
[.787]
10.00
[.394]
2.00
[.079]
2.80
[.110]
17.20
[.677]
23.00
[.906]
24.0
[0.94]
6.5
[0.26]
3.5
[0.14]
Ø 4.15
[0.16]
28.0
[1.10]
10.0
[0.39]
10.0
[0.39]
PC Board Layout
Coupling type* Part No.
C, F 6-1393696-7
*For coupling type see DIN 1.0/2.3
Section.
SIEMAX Connector, SMT
Right-Angle Jack, 3 Poles
Note: Part Numbers are RoHS
compliant except:Indicates
non-RoHS compliant.
Between Series Adapters
Between Series Coaxial
Transmission Line Adapters
provide convenient transi-
tions between popular
series coaxial connectors.
The adapter design pro-
vides a minimum length
consistent with good electri-
cal performance. The small
size, low VSWR, and broad
frequency coverage permits
a wide range of applications
in both measurement and
systems use.
Design and Construction
The standard units are
constructed of stainless
steel with passivated finish,
nickel plated brass, and
gold plated brass. The
material and plating is to be
consistent with the basic
connector series. All
dielectrics are TFE fluoro-
carbon. The center con-
tacts are made of beryllium
copper, gold plated.
Types
The straight in-line adapters
are available in many
combinations of plug and
jack (male and female) con-
figurations. Also, popular
panel mount versions are
cataloged. For special
modifications and hermetic
seal version, consult
Tyco Electronics.
Application
The major application is
the requirement for a low
VSWR, compact transition in
both test system and oper-
ating systems. Many panel
mount and bulkhead mount
versions are available so the
designer can use small size
connectors for internal
design, but adapt to a
larger rugged version for
external connection.
Selection charts follow to
help you find the correct
adapter for your application.
MCX Page 253
N Series Page 253
BNC Page 253
Series 1.6/5.6 Page 253 Page 253
SMA/SMA 18 GHz Page 253 Page 253 Page 253 Page 253 Page 253 Page 253 Page 253
Plug-Plug
Jack-Jack
QMA
Series 1.0/2.3
SSMT
SMP
SMA
SMB
7-16
BNC
OSP Bulkhead
OSP
N Series
N Series Page 254
BNC Page 254 Page 256
TNC Page 254 Page 254
SMA
SMA Bulkhead Page 254 Page 255 Page 254 Page 254
SMA 18 GHz Page 254 and 255 and 256 and 255 Page 255 Page 255 Page 255
Series 1.0/2.3 Page 256
Series 1.6/5.6
Series 1.0/2.3
SSMT
SMP
SMB
75 OHM SMB
7-16
TNC
TNC Flange Mount
TNC Bulkhead
BNC
BNC Bulkhead
OSP
OSP Bulkhead
OSP Floating Rear
Mount
N Series
N Series Flange Mount
N Series Bulkhead
MCX
251
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
252
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
7 mm Page 256 Page 256 Page 256 Page 256
7 mm best VSWR Page 256 Page 256
MCX Page 256
N Series
N Series Flange Mount Page 256 Page 257 Page 257 Page 257 Page 257
OSP
OSP Bulkhead Page 257 Page 257
BNC Page 257 Page 257 Page 257 Page 259
TNC
TNC Flange Mount Page 258 Page 258 Page 258 Page 258
SMB
75 OHM SMB Page 259 Page 258
SMA
SMA Flange Mount Page 258
SMA 18 GHz
Page 259 Page 258 and 259 Page 260 Page 258 Page 259 Page 259 Page 259 Page 259 Page 259
SMP Page 260
SSMT Page 260
DIN-Series 1.0/2.3 Page 260
DIN-Series 1.6/5.6 Page 259 Page 260
QMA Page 260
UMCC Page 260
DIN-Series 1.6/5.6
DIN-Series 1.0/2.3
SSMT
SMP
SMA
SMA Flange Mount
SMA 18 GHz
SMB
TNC
BNC
OSP
OSP Bulkhead
N Series
N Series Flange Mount
MCX
7 mm best VSWR
7 mm
UMCC
Jack-Plug
Between Series Adapters (Continued)
Plug-Plug
MCX Plug – SMA Plug
Part No. 1061071-1
19.3
[.760]
Ref.
6.4
[.250] Hex. 7.9
[.312] Hex.
Series 1.6/5.6 Plug – Series 1.0/2.3 Plug
Part No. 2-1393670-1
Coupling Type A
Ø 10.8
[0.43]
28.0
[1.10]
9.2
[0.36] 8.9
[0.35]
Ø 6.5
[0.26]
1) 1)
BNC Plug – SMB Plug
Part No. 1058066-1
Ø 14.3
[.562] Ref.
34.1
[1.343]
Ref.
7-16 Plug – N Series Plug
Part No. 1313453-1
48.6
[1.912] Ref.
Ø 32.0
[1.260] Ref.
SMA Plug – SMP Plug
Part No. 1056706-1
17.5
[.690] Ref.
SMA Plug – SMB Plug
Part No. 1060494-1
21.9
[.862]
Ref.
6.4
[.250] Hex.
7.9
[.312] Hex.
SMA Plug – SSMT Plug
Part No. 1055695-1
13.7
[.538] Ref.
SMA Plug – OSP Plug
Part No. 1059711-1
17.0
[.670]
Ref.
7.9
[.312] Hex.
SMA 18 GHz Plug – N Series Plug
Part No. 1057367-1
Ø 21.0
[.828] Ref.
Hex.
32.5
[1.281]
Ref.
7.9
[.312]
QMA Plug – SMA Plug
Part No. 1408393-1
30.60
[1.20]
8.70
[0.34]
Ref.
SMA Plug QMA Plug
Hex.
7.90
[0.31] Hex.
BNC Plug – Series 1.6/5.6 Plug
Part No. 1-1393665-4
Ø 14.5
[0.57]
46.4
[1.83]
Ø 10.8
[0.43]
1) Detent for jack
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
253
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
254
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Jack
7-16 Jack – N Series Jack
Part No. 1311206-1
51.0
[2.010]
Ø 14.3
[.562] Ref.
32.1
[1.265]
Ref.
BNC Jack – 75 ohm SMB Jack
Part No. 1311209-1
30.4
[1.197]
12.9
[.508]
3.82
[.150] 12.0
[.472]
Hex.
17.4
[.687]
Across
Flat
Ø 12.9
[.508]
Hex.
15.8
[.625]
BNC Jack – SMB Jack
Part No. 1058056-1
TNC Jack – N Series Flange Mount Jack
Part No. 1057843-1
Ø 3.2
[.125]
49.1
[1.932]
2.0
[.080]
16.7
[.656]
25.4
[1.00]
18.2
[.718]
Sq.
Ref.
Typ.
4 Plcs.
MCX Jack – SMA Jack
Part No. 1061070-1
15.6
[.615]
6.4
[.250] Hex.
Ø 22.0
[.866]
Max.
Panel
31.3
[1.232]
Min.
Ø 15.9
[.625]
6.3
[.250]
22.0
[.867]
13.6
[.534]
Min.
3.2
[.125]
Recommended
Mounting Hole
TNC Jack – BNC Jack
Part No. 1057845-1
Ø 14.5
[.572] Ref.
Ref.
43.1
[1.698]
SMA Jack – N Series Jack
Part No. 1057341-1
Ø 17.45
[.687] Ref.
31.3
[1.231]
SMA Jack – N Series Bulkhead Jack
Part No. 1057463-1
SMA Jack – N Series Flange Mount
Part No. 1057343-1
Ø 3.2
[.125] 4 Plcs.
Sq.
4.7
[.187]
Max.
Panel
31.3
[1.231]
18.2
[.718]
25.4
[1.00]
SMA Jack – BNC Jack
Part No. 1058058-1
Ø 14.3
[.562] Ref. 33.5
[1.320]
BNC Bulkhead Jack – SMA Jack
Part No. 1058117-1
Ø 12.7
[.500]
33.5
[1.320]
Ref.
Min.
17.9
[.703]
Hex.
Max.
Panel
15.9
[.625] Hex.
17.4
[.687]
5.6
[.220]
Min.
3.2
[.125]
Recommended
Mounting Hole
TNC Flange Mount Jack – SMA Jack
Part No. 1057841-1
Ø 11.1
[.437]
25.4
[1.000]
2.4
[.093]
8.0
[.315]
17.4
[.687]
12.7
[.500]
4.8
[.188]
Max.
Panel
Sq.
Typ.
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
SMA Jack –
OSP Floating Rear Mount Jack
Part No. 1059724-1
+ .076
– .000
+ .003
– .000
Ø 8.6
[.340 ]
+ .000
– .127
+ .000
– .005
1.3
[.050
+ .050
– .000
+ .002
– .000
Ø 8.0
[.316 ]
]
11.2 ± .076
[.440 ± .003]
22.2
[.874]
Ø 7.6
[.300]
Recommended
Mounting Hole
Between Series Adapters (Continued)
Jack-Jack (Continued)
Ø 16.7
[.656]
Ø 11.2
[.439]
Max.
Panel
33.0
[1.300]
Min.
Min.
5.0
[.196]
Hex.
14.3
[.562]
6.4
[.250]
3.2
[.125]
Recommended
Mounting Hole
SMB Jack – SMA Jack
Part No. 1060487-1
17.8
[.700]
6.4
[.250] Hex.
SMA Jack – TNC Bulkhead Jack
Part No. 1057908-1
SMA Jack – SMP Jack
Part No. 1056702-1
12.6
[.498]
4.70
[.187]
SMA Jack – SSMT Jack
Part No. 1055694-1
12.9
[.508]
Ref.
OSP Jack – SMA Bulkhead Jack
Part No. 1059733-1
Recommended
Mounting Hole
+ 0.03
– 0.00
+ .001
– .000
Ø 6.15
[.242 ]
Max.
Panel
17.3
[.680]
3.2
[.125]
Hex.
7.9
[.312] Hex.
7.9
[.312]
5.8
[.230]
SMA 18 GHz Jack – N Series Jack
Part No. 1058651-1
Ø 17.4
[.687] Ref.
31.2
[1.229]
Ref.
SMA 18 GHz Jack –
N Series Flange Mount Jack
Part No. 1058653-1
Ø 3.2
[.125]
Ø 16.0
[.630]
Max.
4 Plcs.
Sq.
Max.
Panel
31.2
[1.229]
Ref.
16.5
[.650]
2.0
[.080]
25.4
[1.000]
Typ.
18.2
[.718]
4.7
[.187]
SMA 18 GHz Jack – N Series Bulkhead Jack
Part No. 1058675-1
Ø 22.0
[.866]
Ø 15.9
[.625]
Max.
Panel
31.3
[1.232]
Min.
13.6
[.534]
Min.
6.3
[.250]
22.0
[.867]
3.2
[.125]
Recommended
Mounting Hole
OSP Jack – SMA Jack
Part No. 1059707-1
Ø 7.6
[.300]
14.1
[.554]
SMA Jack – OSP Bulkhead Jack
Part No. 1059729-1
Recommended
Mounting Hole
+ .003
– .000
+ .001
– .000
Ø 9.12
[.359 ]
Max.
Panel
Ref.
14.1
[.554]
Hex.
11.1
[.437] Hex.
11.1
[.437]
6.4
[.250]
3.2
[.125]
OSP Floating Flange Mount Jack –
SMA Jack
Part No. 1059731-1
Recommended
Mounting Hole
+ 0.03
– 0.05
+ .002
– .001
Ø 9.6
[.377 ]
Max.
Panel
22.2
[.874]
9.7
[.380]
14.2
[.560]
1.7
[.065]
14.2
[.560]
Ø 9.4
[.372]
Ø 19.1
[.750]
Ø 2.6
[.102]
2 Plcs.
3.2
[.125]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
255
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
256
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Jack (Continued)
BNC Jack –
Series 1.6/5.6 Jack
Part No. 1-1393665-5
Ø 9.6
[0.38]
45.4
[1.79]
Ø 8.2
[0.32]
Ø 11.0
[0.43]
Ø 14.5
[0.57]
M9.0x0.5
[0.35]x[0.02]
Series 1.0/2.3 Jack –
Series 1.6/5.6 Jack
Part No. 2-1393670-4
Coupling Type A, B, F
Ø 4.1
[0.16]
39.4
[1.55] Ø 10.8
[0.43]
Ø 8.2
[0.32]
Jack-Plug
N Series Plug to 7 mm Jack
Part No. 1061742-1
43.3
[1.705] Ref.
19.1
[.750] Hex. Ø 22.4
[.880]Ref.
30.7
[1.208]
Ref.
Ø 22.1
[.870]
11.1
[.437] Hex.
19.1
[.750] Hex.
TNC Plug to 7 mm Jack
Part No. 1061739-1
40.9
[1.610]Ref.
19.1
[.750] Hex. Ø 22.4
[.880]Ref.
15.9
[.625] Hex.
OSP Plug to 7 mm Jack
Part No. 1059713-1
TNC Plug to 7 mm Best VSWR Jack
Part No. 1061744-1
40.9
[1.610]Ref.
19.1
[.750] Hex. Ø 22.4
[.880]Ref.
15.9
[.625] Hex.
16.8
[.660]
Ref.
6.4
[.250] Hex. 7.9
[.312] Hex.
N Series Jack – 7 mm Plug
Part No. 1061757-1
36.7
[1.445]
Ref.
Hex.
19.1
[.750] Ref.
Ø 22.4
[.880]
MCX Jack – SMA Plug
Part No. 1061073-1
SMA Flange Mount Plug to 7 mm Jack
Part No. 1061751-1
Ø 3.2
[.125] 4 Plcs.
Sq.
Max.
Panel
35.0
[1.380]
Ref.
25.4
[1.000]
Hex.
7.9
[.312]
Typ.
19.1
[.750]
Hex.
19.1
[.750] Ref.
Ø 22.4
[.880]
2.4
[.093]
2.1
[.083]
Ø 22.4
[.880] Ref.
19.1
[.750] Hex.
7.9
[.312] Hex. 31.8
[1.25]
Ref.
N Series Plug to 7 mm Best VSWR Jack
Part No. 1061738-1
43.3
[1.705] Ref.
19.1
[.750] Hex. Ø 22.4
[.880] Ref.
SMA Plug to 7 mm Jack
Part No. 1053646-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Between Series Adapters (Continued)
Jack-Plug (Continued)
N Series Jack – 7 mm Best VSWR Plug
Part No. 1061752-1
36.7
[1.445]
Ref.
Hex.
19.1
[.750] Ref.
Ø 22.4
[.880]
Ø 16.8
[.660] Ref.
Ref.
52.7
[2.076]
N Series Jack – TNC Plug
Part No. 1057388-1
Ø 15.9
[.625]
Ref.
Ref. Ref.
Ø 16.8
[.660]
51.9
[2.043]
BNC Plug – N Series Jack
Part No. 1057392-1
Ø 17.45
[.687] Ref.
Hex.
32.8
[1.292]
Max.
7.9
[.312]
SMA 18 GHz Plug – N Series Jack
Part No. 1058664-1
Ø 17.4
[.687] Ref.
7.9
[.312]Hex.
32.3
[1.270]
Ref.
SMA Plug – N Series Jack
Part No. 1057381-1
SMA Plug – N Series Flange Mount Jack
Part No. 1057385-1
Ø 3.2
[.125] 4 Plcs.
Sq.
Max.
Panel
32.3
[1.270]
Ref.
25.4
[1.000]
Hex.
7.9
[.312]
Typ.
18.2
[.718] 4.7
[.187]
OSP Jack – 7 mm Plug
Part No. 1059720-1
Ø 22.4
[.880] Ref.
19.1
[.750] Hex.
11.1
[.437] Hex.
29.6
[1.166]
Ref.
SMA Plug – OSP Jack
Part No. 1059718-1
17.4
[.685]
Ref.
7.9
[.312] Hex.
Ø 7.6
[.300]
Recommended
Mounting Hole
+ 0.03
– 0.00
+ .001
– .000
Ø 9.12
[.359 ]
Max.
Panel
17.4
[.686]
Ref.
3.2
[.125]
Hex.
7.9
[.312] Hex.
11.1
[.437]
6.4
[.250]
BNC Jack – N Series Plug
Part No. 1057390-1
Ø 21.0
[.827] Ref.
Ref.
49.1
[1.934]
SMA Plug – OSP Bulkhead Jack
Part No. 1059758-1
Ø 14.3
[.562] Ref.
35.8
[1.408]
Ref.
SMA Plug – BNC Jack
Part No. 1058083-1
Ø 14.3
[.562] Ref.
Ref.
34.6
[1.362]
Hex.
7.9
[.312]
BNC Jack – SMB Plug
Part No. 1058077-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
257
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
258
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Plug (Continued)
TNC Jack – 7 mm Plug
Part No. 1061753-1
41.3
[1.625]
Ref.
Hex.
19.1
[.750] Ref.
Ø 22.4
[.880]
41.3
[1.625]
Ref.
Hex.
19.1
[.750] Ref.
Ø 22.4
[.880]
TNC Jack – N Series Plug
Part No. 1057387-1
Ø 21.0
[.827] Ref.
Ref.
49.1
[1.934]
TNC Jack – 7 mm Best VSWR Plug
Part No. 1061758-1
TNC Flange Mount Jack – SMA Plug
Part No. 1057857-1
26.4
[1.038]
2.0
[.080]
13.4
[.529]
7.9
[.312]
Ø 11.8
[.465] Hex.
17.4
[.687] Sq.
12.7
[.500] Typ.
Ref.
Ref.
Max.
SMA Plug – SMB Jack
Part No. 1060500-1
20.7
[.815]
Ref.
6.4
[.250] Hex.
7.9
[.312] Hex.
18.2
[.716]
6.4
[.250] Hex.
SMA 18 GHz Jack – N Series Plug
Part No. 1057377-1
Ø 21.0
[.828] Ref.
31.5
[1.250]
Ref.
SMA Jack – MCX Plug
Part No. 1061072-1
Ø 14.3
[.562] Ref.
31.8
[1.250]
Ref.
TNC Plug – SMA Jack
Part No. 1057853-1
Ø 15.9
[.625] Ref.
Ref.
25.4
[1.000]
SMA Jack – BNC Plug
Part No. 1058081-1
SMA Jack – SMB Plug
Part No. 1060498-1
19.3
[.760]
Ref.
6.4
[.250] Hex.
14.2
[.560]
SMA Jack – SSMT Plug
Part No. 1055696-1
10.5
[.413] Ref.
SMA Jack – SMP Plug
Part No. 1056707-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Ø 3.2
[.125]
Ø 12.7
[.500]
Min.
Panel
Hole
4 Plcs.
Sq.
Max.
Panel
31.8
[1.250]
11.7
[.461]
2.0
[.080]
25.4
[1.000]
Typ.
18.2
[.718]
6.4
[.250]
OSP Plug – SMA Jack
Part No. 1059716-1
6.4
[.250]
Ø 7.6
[.300]
13.7
[.538]
N Series Flange Mount Plug –
SMA 18 GHz Jack
Part No. 1058666-1
SMA 18 GHz Jack – OSP Bulkhead Plug
Part No. 1059756-1
Recommended
Mounting Hole
+ 0.03
– 0.00
+ .001
– .000
Ø 6.15
[.242 ]
19.3
[.760]
1.7
[.065]
11.4
[.447] 3.2
[.125]
Max
Panel
Hex.
11.1
[.437] Hex.
7.9
[.312]
16.0
[.632] Ref. 7.90
[.312] Hex.
SMA Plug
OSMP
Jack
SSMT Jack – SMA Plug
Part No. 1055697-1
16.2
[.639] Ref.
SMA
Plug SSMT
Jack
SMP Jack – SMA Plug
Part No. 1056708-1
Series 1.6/5.6 Plug – Series 1.0/2.3 Jack
Part No. 2-1393670-2
Coupling Type A, B2, F2
Ø 10.8
[0.43]
33.0
[1.30]
9.2
[0.36]
Ø 4.1
[0.16]
1)
BNC Plug – Series 1.6/5.6 Jack
Part No. 1-1393665-6
Ø 14.5
[0.57]
44.3
[1.74]
Ø 8.2
[0.32]
BNC Jack – Series 1.6/5.6 Plug
Part No. 1-1393665-7
Ø 9.6
[0.38]
45.4
[1.79]
Ø 10.8
[0.43]
Ø 11.0
[0.43]
Ø 14.5
[0.57]
Between Series Adapters (Continued)
Jack-Plug (Continued)
SMA Flange Mount Jack – 7 mm Plug
Part No. 1061750-1
30.5
[1.200]
19.1
[.750] Hex.
Ø 22.4
[.880]Ref.
Ø 3.2
[.125]
Dia.
4 Plcs.
2.0
[.080] 23.5
[.925] Ref.
19.1
[.750] Typ.
25.4
[1.000] Sq.
SMA Jack – UMCC Plug
Part No. 1775229-1
14.0
[.551]
5.6
[.220]
10.0
[.393]
Ø 5.3
[.208]
Ø 2.6
[.102]
Ø 6.25
[.246]
1/4-36UNS
SMA Jack – UMCC Plug
Part No. 1775230-1
14.0
[.551]
5.6
[.220]
10.0
[.393]
Ø 5.3
[.208]
Ø 2.5
[.098]
Ø 6.25
[.246]
1/4-36UNS
Ø 22.4
[.880] Ref.
19.1
[.750] Hex.
30.9
[1.216]
Ref.
SMA 18 GHz Jack – 7 mm Plug
Part No. 1053788-1
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
259
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
260
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Between Series Adapters (Continued)
Jack-Plug (Continued)
Series Plug 1.0/2.3 – Series 1.6/5.6 Jack
Part No. 2-1393670-3
Coupling Type A, B2, F2
1) Detent for jack
2 Only jackside
Ø 6.5
[0.26]
34.5
[1.36]
8.9
[0.35]
Ø 8.2
[0.32]
Ø 10.8
[0.43]
1)
QMA Jack – SMA Plug
Part No. 1408343-1
21.50
[0.85]
7.90
[0.31]
Ref.
QMA Jack SMA Plu
g
Hex.
6.35
[0.25] Hex.
UMCC Jack – SMA Plug
Part No. 1775228-1
10.60
[.417] 8.0
[.315] Hex.
1.10
[.043]
Ø 2.00
[.078]
UMCC Jack – SMA Plug
Part No. 1775227-1
10.60
[.417] 8.0
[.315] Hex.
1.10
[.043]
Ø 1.90
[.074]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
Coaxial Terminations
SMA Plug Terminator
Part Number 1460802
Plating — Gold
Frequency — 6 GHz
3.40
[.134] Max.
11.00
[.433] Max.
2.50
[.098] Max.
Coupling Nut
Shell
Center
Conductor
Dielectric
SW 8 h11
SMC Plug Terminator
Part Number 1460803
Plating — Gold
Frequency — 6 GHz
13.00
[
.512
]
Max.
SW 6 h11
+ 0.10
– 0.30
+ .004
– .012
3.30
[.130 ]
Coupling Nut
Shell
Center
Conductor
Dielectric
Push Pull Plug Terminator
Part Number 619219
Plating — Gold
Frequency — 6 GHz
17.70
[.697] Ref.
Ø 8.30
[.327]
Ø 7.70
[.303]
8.00
[.315]
5.50
[.217]
QMA Plug Terminator
Part Number 619271-1
Single Packaging
Plating — Standard Gold
Part Number 5-619271-1
1000 Pieces per Pack
Plating — Standard Gold
Part Number 619271-2
Single Packaging
Plating — Higher Gold
Part Number 5-619271-2
1000 Pieces per Pack
Plating — Higher Gold
19.80
[.780]
Ø 10.50
[.413]
Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant.
261
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
262
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Application Tooling
Fixture Sub-Assembly
Center Contact Holder
Locator Tool
Solder Gage
Inserts
Description Model Part
No. NSN No.
Center Contact Holder T-4580 –– 1055474-1
Fixture Sub-Assembly T-4567 –– 1055439-1
Inserts – 2.16 [.085] (2) T-4700-2 5120-00-132-6808 1055441-1
Inserts – 3.66 [.141] (2) T-4700-1 5120-00-132-6807 1055440-1
Locator Tool T-4596 –– 1055476-1
Locator Tool T-4574 –– 1055477-1
Solder Gage .813 [.032] T-4562-6 –– 1055475-1
All Tools May Be Purchased Separately.
For installation of TNC Series connectors to 3.66 [.141] and 2.16 [.085] diameter semi-
rigid cable. Most BNC Series connectors can also be assembled using this kit. See
appropriate assembly procedure for specific tooling. This kit contains:
Installation Kit
Part No. 1055469-1
For TNC Connectors
Universal Compression
Crimp Tool
Kit Part Number 1055835-1
Tyco Electronics Universal
Compression Crimp Tool
offers the ability to rapidly
produce cable assemblies
using solderless compres-
sion crimp connectors with
semi-rigid cables. This uni-
versal assembly tool kit will
attach SMA, OSP, N and
TNC series connectors to
3.58 [.141], 2.16 [.085] and
6.35 [.250] cable quickly
and consistently with
excellent mechanical and
electrical results.
The tool kit permits single
hand assembly. Anvils and
cable supports can be
quickly changed. Crimp
lengths can be adjusted
from .025 [.001] to 25.4
[1.000] in increments of
.025 [.001]. Sharp radius
bends in cables are easily
accommodated. The kit
contains:
Item Description Part No.
Center Contact Holder 1055454-1
Dielectric Insert Tool 1055448-1
1055447-1
Dielectric Recess Tool 1055450-1
Fixture Sub-Assembly 1055439-1
Inserts — 2.16 [.085] (2) 1055441-1
Inserts — 3.58 [.141] (2) 1055440-1
1055442-1
Locator Tool 1055443-1
1055446-1
1055451-1
Retainer Ring Pliers 1055449-1
Solder Gauge 0.25 [.010] 1055500-1
Solder Gauge 0.38 [.015] 1055445-1
Solder Gauge 0.46 [.018] 1055444-1
Description Part No.
Crimp Frame 1055831-1
Calibration Gauge 1055832-1
3.58 [.141] Cable Support 1055833-1
2.16 [.085] Cable Support 1055834-1
SMA Plug Anvil 1055836-1
SMA Jack Anvil 1055837-1
Type N Plug Anvil 1055838-1
Type N Jack Anvil 1055839-1
TNC Plug Anvil 1055840-1
TNC Jack Anvil 1055841-1
OSP Plug Anvil 1055842-1
OSP Jack Anvil 1055843-1
All tools may be purchased separately.
Crimp Frame
Gauge
Anvil
Cable Supports
Inserts
Locator Tools
Retainer Ring Pliers
Fixture Sub-Assembly
Solder Gage
Dielectric Recess Tool
Center Contact Holder
Dielectric Insert Tool
Solder Assembly Kit
Brass SMA Connectors
Kit Part Number 1055420-1
263
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
RF Coax Connectors
264
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
RF Coax Connectors
Crimping Tools
IDC Tool
For assembling IDC coaxial
connectors Series 1.6/5.6
mS on coaxial cables.
L
50.0
[1.97]
6.6
[0.26]
1
2
3
Hexagon Profile No.
with Open Jaws
Part No.
1-1393524-1
225.0
[8.86]
Item Width Across Flats of the Profile Dim. Color of Part No.
12 3 Lhandles
Crimping Tool 2.8 3.2 3.6 214.0 Green 1393524-4
0.11 0.13 0.14 8.43
Crimping Tool 2.8 5.4 4.5 260.0 Yellow 1393524-5
0.11 0.21 0.18 10.24
Crimping tools are used for
assembling coaxial connec-
tors on coaxial cables. They
can be applied particularly
economically for small
batch sizes.
The crimping dies are a
fixed part of the crimping
tools. Each tool is equipped
with 2 or 3 different profiles.
A total of 6 widths across
flats are possible with 2
tools, whose hand lengths
are adapted to the dimen-
sions of the hexagon pro-
files. The tools can be
distinguished at a glance by
different colored handles.
Item Part No.
Removal tool
length 70 [2.76] 2-1393524-4
length 200 [7.87] 2-1393524-6
Spare part
Ferrule 2-1393524-7
Removal Tool
For replacing the special
contacts on connectors DIN
41612 M and SIEDECON.
12.5
[0.49]
70.0
[2.76]
Ferrule (spare part)
1.4
[0.04]
200.0
[7.87]
12.5
[0.49]
265
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
Item Part No.
Setting gauge for types M 1393494-9
M/2 1-1393494-0
M/3 1-1393494-1
Note: These gauges can also be used to pro-
tect types C, C/2, C/3 and D.
Setting Gauge
Protective Caps/Setting
Gauges
The setting gauges are used
to position coaxial jacks and
pre-mating high-current
plugs on male connectors
DIN 41612 M if the pins are
flow-soldered into PC boards.
The gauges are held by
clamping in connector
body and protect the blade
contacts.
The gauges provide
protection
— during transport (if the
male connectors have
already been removed
from the packaging),
— during assembly,
— against soiling,
— during soldering.
ECN1225-P
PC Board
Setting
Gauge
Male Connector DIN 41612M
Used to tighten the threaded rings 1-1393562-0
on bulkhead jacks Series 1.6/5.6.
Item Part No.
Wrench 1393524-1
Used to tighten the threaded ring on bulkhead
jack 1393670-8.
Item Part No.
Wrench 1393488-4
Used to tighten the threaded ring on bulkhead
jacks Series 1.0/2.3
Item Part No.
Wrench 1393488-3
Wrench
Ø 5.6
[0.22]
1.0
[0.04]
Ø 6.7
[0.26]
50.0
[1.97]
1.0
[0.04]
Ø 6.1
[0.24]
1.2
[0.05]
Ø 7.3
[0.29]
50.0
[1.97]
1.5
[0.06]
ECN1230-Q
Ø 11.0
[0.43]
Ø 0.91
[0.36]
0.9
[0.04]
1.35
[0.05]
40.0
[1.57]
Movable
50.0
[1.97]
50.0
[1.97]
RF Coax Connectors
266
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
RF Coax Connectors
Hand Tools
Tyco Electronics PRO-CRIMPER II Hand Tools are econ-
omy versions of our Tyco Electronics CERTI-CRIMP Hand
Tools, featuring ratcheted crimp control to provide full
die closure and help eliminate partial crimps. With an all
new design, the PRO-CRIMPER II hand tools require dra-
matically less hand force to produce the same connection
as comparable tools. Dies are interchangeable. It’s the
most versatile and reliable crimping tool in the mid-price
class. Recommended for networking installations, and
commercial, industrial and institutional maintenance work.
See Catalog 82276 for further information.
Typical PRO-CRIMPER III Hand Tool
No. 58433-1
for 50 Ohm BNC Dual
“O” Crimp Commercial
Connectors
Tyco Electronics CERTI-CRIMP Hand Tools are our top-of-
the-line crimping tools featuring the original ratcheted crimp
control. All tools are designed to exacting specifications, and
manufactured using the highest quality materials to provide
long service life. Recommended for low production runs,
repairs and prototype work, and applications requiring con-
sistent, highly-reliable terminations. See Catalog 65780 for
further information.
Typical CERTI-CRIMP Hand Tools with Integral
(Non-Interchangeable) Dies
No. 69477-1
for 50 Ohm BNC
Dual Crimp MIL Type
Connectors
No. 220015-1
for 50 Ohm N
Connectors
CERTI-CRIMP Hand Tool with Interchangeable Dies
No. 69710
Pneumatic Tools
The 626 Pneumatic Tool System, as the name implies, will
apply a broad range of products in the 6-26 AWG [13-0.12
mm2] wire range. A basic 626 Pneumatic Tool System
requires a power unit, a tool holder, a crimp head assembly
and a die set when applicable. This premium system is well
suited for low- to medium- volume production and harness
assembly operations. Since the crimp head can be rotated
to any angle, the operator can also work on more difficult
terminations in confined equipment cabinets or enclosures.
Interchangeable tool holder assemblies and crimping
heads are available to crimp a variety of products.
Crimping heads for the earlier Model 2614 pneumatic
power unit can be used with the 626 Pneumatic Tool
System. If you are already using Tyco Electronics hand
tools, many crimp heads and die sets can be removed,
attached to an adapter with quick
pins and used with the
626 Pneumatic Tool
System. An
adapter is even
available to
accept lower
cost die sets of
the PRO-CRIMPER
II hand tool. For
more information,
order catalog 124208.
Bench Mount Assembly for
Pneumatic Tool System
(Optional)
Fully adjustable stand allows
operator free use of both
hands — recommended for
maximum productivity.
No. 856402-1
Part Number 1725837-1
Part Number 1213890-1
(Open Barrel)
Battery Powered Crimp Tool
Take automatic crimping
away from the bench to the
product, with this convenient,
portable, battery-operated
tool. It’s at home in the
factory or in the field.
• Completely portable—
performs about 100
crimps per charge
• Terminates wires to 10
AWG [6 mm2]
• Weighs only 1.57 kg [3.46
lb] including battery; 360
mm [14.2 in] long
• Pressure-sensitive cycle
control
• Kit includes tool, 2 batter-
ies, and charger
No. 189721-1
267
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
Bench-Mounted Machines
AMP-O-LECTRIC bench-mounted, semi-automatic
terminating machines may be used to apply RF products
such as Commercial BNC and TNC Connectors, Miniature
and Standard UHF Connectors, and Braid-Pic Contacts
and Terminals. The Model G unit features interchangeable
applicators, and is used to apply strip-form contacts. The
“Coax” unit is used to apply loose-piece contacts and
ferrules with dies that are mounted onto the machine.
See Catalog 65828 and Customer Manual 409-2627 for
further information.
AMP-O-LECTRIC Model G,
No. 354500 Series with
Tyco Electronics Crimp
Quality Monitor
Semi-Rigid Cable Tooling
The tools listed here are designed specifically to strip and
terminate semi-rigid cable. These tools operate basically the
same as the flexible cable tools, in that they produce uni-
form terminations time after time, without heat damage from
soldering.
Hand Tool for BNC and TNC
Semi-Rigid Cable Connectors
No. 59980-1 Frame only—
does not include dies and locator
Stripping Tools
The hand-operated Tyco Electronics Coaxial Cable
Stripper features interchangeable, color-coded blade cas-
settes and V-blocks to accommodate 2- or 3-step stripping
for cable diameters ranging from 2.54 [.10] through 7.62
[.30]. You strip cable by simply clamping and rotating the
tool around the cable. See Instruction Sheet IS 2766 for
further information.
For Use With Tool No.
Connector Type
BNC Single Crimp 603995-1
BNC Commercial and 603995-2
UHF Miniature
UHF Standard 603995-3
BNC MIL Type Dual Crimp 603995-5
BNC Commercial Dual Crimp 603995-6
RF Coax Connectors
268
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Application Tooling (Continued)
RF Coax Connectors
Hand Tool Kit for SMA and Blindmate
Connectors
No. 59981-1
Pneumatic Tool for Terminating BNC, TNC,
SMA and Blindmate Connectors
(for RG 402/U and RG 405/U Cable)
No. 58318-1*
This pneumatic tool is a bench-mounted, semi-automatic
power tool designed for easy operation. The operator
needs only to depress the trigger to complete a termination.
It is used with the cable preparation machine to produce
finished terminations.
*Includes Locators 220241-1 and 308075-2. Dies are not included.
Part Numbers
Item Description Tyco Electronics Military
(M22520/)
Hand Tool 59980-1 36-01
Plug Locator 220220-2 36-06
(without Center Contact)
Plug Locator 220221-2 36-04
(with Center Contact)
Jack Locator 220222-2 36-05
Die Set for RG 402/U Cable 312253-1 36-03
(3.58 [.141] O.D.)
Die Set for RG 405/U Cable 312253-2 36-02
(2.18 [.086] O.D.)
Cutoff Fixture 311395-1 36-09
Cable Dressing Fixture 311396-1 36-07
Trimmer Tool 312317-1 36-08
Cable Bend Fixture Assembly 220224-1 36-10
Includes following 6 items:
Bend Segment, RG 402/U 311386-1 36-11
(3.18 [.125] Radius)
Bend Segment, RG 402/U 311386-2 36-12
(6.35 [.250] Radius)
Bend Segment, RG 405/U 311386-3 36-13
Tool Holder 311392-1 —
Limiting Pin 307581-1 —
Conforming Block 312067-1 —
Hex Wrench 21027-6 —
Carrying Case 13126-1 —
Insert, Case 13127-1 —
269
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Cable Assembly Capabilities
When your RF application
demands a high perform-
ance cable assembly,
make Tyco Electronics your
advantage. We specialize
in solving tough problems
with assemblies designed
and manufactured to
the most demanding
requirements. Why
Tyco Electronics? Quite
simply, because we can
give you a comprehensive
engineered solution to your
application needs. By pro-
viding a precise match
between cable, connector
and application, we supply
cable assemblies that meet
your exact needs.
Every cable assembly
application is unique.
A Tyco Electronics custom
solution can be designed to
meet your special require-
ments — whether these
are related to return and
insertion loss, propagation
delay and phase matching,
shielding and EMI, or spe-
cial mechanical issues like
density, latching, appear-
ance, flexibility, or even
weight. We approach your
cable assembly individually,
using the vast resources
and knowledge gained from
years of experience gener-
ating custom solutions.
By making Tyco Electronics
your partner in cable
assembly design, you
reduce risk and gain the
assurance that you will
receive assembly on time,
to specification and within
your budget.
Tyco Electronics offers a
wide range of RF/Coax
Cable assemblies including
50 and 75 Ohm solutions,
from micro-miniature UMCC
and SSMT to high power
assemblies using N-Series
and DIN 7/16 connectors.
Furthermore, we use a
variety of cable types to
meet unique requirements
from standard military quali-
fied RG cable to low loss
foamed PE and PTFE tape
wrapped cable as well as
semi-rigid. Our engineering
experts will find the right
combination of materials to
provide a solution that is
cost effective.
270
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Cable Assembly Capabilities (Continued)
Utilizing network analyzers,
TDR, and intermodulation
test equipment to mention a
few, our testing capability
allows extensive electrical
and environmental charac-
terization of your assembly.
We offer full test capabilities
right in our manufacturing
facilities. Tests such as
those listed below can be
an integral part of the man-
ufacturing process:
■VSWR,
■Return Loss,
■Insertion Loss,
■Phase matching,
■Propagation Delay,
■Impedance,
■Passive Intermodulation.
Our cable manufacturing
centers are designed to
meet your production
requirements and delivery
needs. Our global loca-
tions, combined with
Tyco Electronics logistic
strengths assures you will
get the product where and
when you need it.
Harrisburg, PA
Product Management
Product Development
Prototyping, Samples
Diecasting
Stamping
Plating
Cable Assembly
Ooskampt, Belgium
Product Management
Product Development
Screw Machining
Plating
Assembly
Norwood, MA
Product Development
Screw Machining
Plating
Connector and Cable
Assembly, Quick Turn
Taipei, Taiwan
Product
Management
Product
Development
Hermosillo,
Mexico
Connector
Assembly
Cable Assembly
Kunshan, China
Product Development
Screw Machining
Connector and
Cable Assembly
Shanghai, China
Connector Assembly
Shenzhen and
Hangzhou, China
Connector Assembly
Tesla, Czech Republic
Connector Assembly
Brazil
Cable Assembly
Switzerland
Development Eng.
Screw Machining
Assembly
271
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Coaxial Cable Assembly Specification Guide
Please use this handy
reference guide when
specifying or building your
new cable assembly.
Length
Label (Optional)
Heat Shrink (Optional)
A
B
CONNECTOR A
INTERFACE example: BNC, MCX, SMA, etc.
STYLE example: Straight Plug, Right-Angle Plug, Bulkhead Jack, etc.
HEAT SHRINK ❏
MARKING
CONNECTOR B
INTERFACE example: BNC, MCX, SMA, etc.
STYLE example: Straight Plug, Right-Angle Plug, Bulkhead Jack, etc.
HEAT SHRINK ❏
MARKING
CABLE
LENGTH (inch/mm)
RG TYPE
OR
CABLE MFG.
MFG. PART NO.
OR
FREQUENCY RANGE (MHz/GHz)
IMPEDANCE Ohms
INSERTION LOSS dB
SHIELDING EFFECTIVENESS dB
TEMP. RANGE (°C/°F)
MAX. AVG. POWER HANDLING* Watt
* 25°C at sea level and max. specified frequency
ELECTRICAL SPECIFICATIONS
VSWR
OR
RETURN LOSS
INSERTION LOSS
DELAY
INSERTION PHASE
INTERMODULATION
LABEL ❏
MARKING
OTHER SPECIFICATIONS
272
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application
Theory and Application
As a leading manufacturer of RF products, Tyco Electronics
produces a large variety of coaxial connectors. The proper
selection and application of these connectors requires a knowl-
edge of factors not involved in other types of connectors and
terminals. The following paragraphs have been prepared to
improve understanding of the theory behind RF connectors:
Basic RF Theory1
RF energy travels by electromagnetic waves, and it is pri-
marily the frequency of these waves that we are interested
in. Briefly, if an oscillating voltage source is connected to a
cable, a continuous electromagnetic wave will propagate
along the cable. A sensor placed at some point on the
cable would indicate a varying voltage (E field) as well as a
current and magnetic field (H field) as the wave travels past
it. This is called an electromagnetic wave because both
electric and magnetic fields are varying. The wave shape is
initially determined by the variation of the source with time.
Figure 7 shows the radiant energy spectrum. Visible light,
radio, television, x-rays and Gamma rays are all phenome-
non of electromagnetic waves at different frequencies. This
introduction will treat only those that are generated by an
electrical source and propagated along a physical cable
or other transmission media. That is, frequencies above
zero and up to about 50 gigahertz.
1The majority of the technical terms, relative to RF and coaxial cable and
connectors, used here-in and throughout this catalog are defined in the Glossary
(Appendix G) starting on page 301.
0 - 29.9 VLF Commercial AC electricity, deep
KHz (Very Low depth sounders, ultrasonic
Frequency) grinders, sonic oscillators
30 - 299.9 LF Shallow-to-medium depth sounders
KHz (Low sonar
Frequency)
300 - 2999.9 MF Commercial AM radio broadcasting,
KHz (Medium marine radio telephone, direction
Frequency) finders
3 - 29.9 HF Citizen band radio, amateur radio,
MHz (High international broadcasting
Frequency)
30 - 299.9 VHF VHF television (Channels 2 thru
MHz (Very High 13), commercial FM radio
Frequency) broadcasting, amateur radio, fire
and police radio
300 - 2999.9 UHF UHF television (Channels 14 thru
MHz (Ultra-high 83), microwave ovens, aeronautical
Frequency) radionavigation
3 - 29.9 SHF Microwave communications, marine
GHz (Super High radar, aircraft tracking and
Frequency) airborne radars
30 - 299.9 EHF Space communications, radio
GHz (Extremely High astronomy
Frequency)
Notes:
1. KHz = Kilohertz (1 thousand cycles per second)
2. MHz = Megahertz (1 million cycles per second)
3. GHz = Gigahertz (1 billion cycles per second)
Frequency or
Wavelengths Designation Applications
Figure 7
Radiant Energy Spectrum
In the following paragraphs we will discuss waves in greater
detail, including the relationship of frequency and wave length,
how pulses are formed and used, how each differs from the
other and the problems involved in their transmission.
Sine Waves
An RF wave is a sine wave, meaning that it smoothly swings
from zero to a positive peak value, then back down past
zero to a negative peak value, then back to zero to com-
plete a 360 electrical degree cycle. The positive and nega-
tive peaks are always equal in amplitude. The two qualities
which characterize this type of wave are amplitude and fre-
quency (f). Figure 8 shows these two characteristics.
Amplitude refers to the peak value attained by the wave and
corresponds to voltage. Frequency refers to the number of
oscillations per second. For example, the sign wave in
Figure 8(B) has completed 12 cycles in one second.
Therefore, we would say that this wave has a frequency of
12 cycles per second or 12 Hertz. The time for one com-
plete cycle is defined as the period (T). The relationship
between the period and frequency is given by the equation:
f = 1 / T in Hertz
A
Peak
Positive
Amplitude
Peak
Negative
Amplitude
One Cycle
123456 78910 11 12
B
Figure 8
Typical Sine Wave Characteristics
No. of Cycles
1 Second
1 2 3 4 5 6 7 8 9 10 11 12
The wave travels away from the generator at speeds approach-
ing the speed of light. When an electromagnetic wave travels in
a medium other than air or vacuum, the speed for the wave is
reduced by a factor of the square root of the dielectric constant
(ε. The velocity (v) of the propagation of a signal is given by:
c
v= __
ε
Where c is the speed of light, 3 x 108m/sec or 1.18 x 1010
in/sec, and εis the dielectric constant of the medium.
(See Table 1 for dielectric constants of various materials)
The wavelength of a signal is given by the formula
c 1.18 x 1010
λ = v/f = __________ _________ inches
εx f (GHz) εx f (GHz)
See Figure 9
Appendix A - Theory and Application (Continued)
Inches
Wavelengths
1000
100
10
1
0.1
.001 GHz .01 GHz .1 GHz 1 GHz 10 GHz 100 GHz
TEFLON (E=2.03) AIR (E=1.00)
FREQUENCY (MHZ)
Figure 9
Frequency (MHZ)
Table 1.
Properties of Insulating Materials
Pulses
The sine wave is most often used for communication
purposes where intelligence is imposed on the wave by a
variation in amplitude (amplitude modulation, AM) or by a
variation in frequency (frequency modulation, FM).
Pulses, on the other hand, are primarily used in computers
and digital instrumentation. Since pulses are generally used
for triggering purposes, the pulse rise/fall time, amplitude
and width are the most important. Figure 10 shows a pulse
and identifies these characteristics.
Width
Amplitude
90% 90%
10%10%
Repetition
Rate
Fall Time
Rise
Time
Figure 10
Pulse Characteristics
Notice that rise time is the time required for the pulse to
rise from 10% to 90% of its amplitude - not from zero to
maximum. Rise and fall time is perhaps the single most
important characteristic of a pulse in today’s high-speed
digital equipment. Figure 11 shows that the faster the rise
and fall time, the more pulses will fit in a given time frame.
Figure 11
Pulse Rise and Fall Time
Time
Time
B
A
The bit rate for a system is the maximum rate of pulses per
second that a system can process without causing data
errors. The maximum performance can also be specified
in terms of baud rate. The baud rate is defined as the
number of characters (bytes) that are transmitted per sec-
ond. Generally a character represents 10 bits (7 bits for
the information, one parity bit, and two for start and stop,
totalling 10).
Now that we know why fast pulses are required, the next
problem is how to obtain faster rise times. A pulse is
made up of a great number of different frequencies, and
the more high frequencies a pulse contains, the faster will
be its rise time and the flatter will be its peak. To better
understand this, refer to Figure 12. At A, you will see a
fundamental frequency (1), its third harmonic (3), and the
resultant waveform (S3), which is a combination of 1 and
3. Although this does not yet resemble a square wave,
you will note that the rise time is decreased, and a dip
appears at the peak. At B of Figure 12, we have added
the fifth harmonic. Rise time is further decreased, and the
peak is beginning to flatten out. At C the seventh har-
monic has been included, and the resultant wave S7
begins to resemble a square wave. As more high fre-
quency harmonics are added to the waveform, it will more
closely resemble a square wave, and the squarer it
becomes, the faster will be the rise time.
Dielectric Dielectric Operating
Material Constant Temperature Range
_________ _________ __________________
TFE 2.03 -70 +250°C
Polyethylene 2.3 -60 +80°C
Nylon 4.6-4.0 -40 +120°C
TPX 2.12 -65 +85°C
Polypropylene 2.25 -40 +105°C
Acetal 3.7 -65 +85°C
273
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
TPX is a trademark of Mitsui Chemicals America, Inc.
274
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application (Continued)
Fast rise times and short pulse widths require high fre-
quency components.
Two frequent causes of digital signal degradation can be
(1) high capacitance of the transmission line and (2) impe-
dence mismatches of connector transmission line or I/0
devices. Selection of an impedance-matched connector
on a digital line, especially if short cable assemblies are
used, can be as important as connector selection for an
RF modulated line. Reflected pulses out of phase with
the original pulse can cause false signals or high error
rates in a digital system.
Since pulses with fast rise times are necessary in high-
speed computers, any circuit element which could reduce
or attenuate high frequency response is undesirable.
A
Figure 12
Development of a Square Wave
S3=1+3
1
3
S3
5
S5
S7=1+3+5+7
7
S5=1+3+5
B
C
Signal Integrity and Propagation
To explain how to maintain signal integrity, it is necessary
to review how the signal is configured in a cable and how
it propagates. Ignoring digital signals for this discussion
we will identify the issues that deal with the integrity of a
sine wave. Consider a coaxial cable consisting of an inner
conductor surrounded by a dielectric material and then an
outer conductor (See Figure 13). The outer conductor may
be a braid, a foil, or a solid metal.
D
Figure 13
Diagram of a Cable
Outer
Conductor
Center
Conductor
Dielectric
Material
d
The alternating current on a conductor is not spread
throughout the conductor but is strongest at the surface
and decays exponentially at points further into the conduc-
tor. This is called the skin effect. At a frequency of 1MHz,
three skin depths is 0.0078” (95% of the current is within
three skin depths of the surface) and at 10GHz three skin
depths is 0.00078”. As a result, the current is on the outer
surface of the inner conductor and the inner surface of the
outer conductor over the entire range of interest for most
RF systems. The dimensions and material beyond several
skin depths have no effect on the wave; gold plated plastic
will propagate as well as gold plated copper at sufficiently
high frequencies.
Figure 14
Electric field (E) and magnetic field (H)
belonging to the principal mode in a coaxial line.
H
E
V
An electromagnetic wave traveling in a coaxial cable pro-
duces an electric and a magnetic field between the inner
conductor and the outer conductor (Figure 14). The electric
(E field) is radial and varies in time. An alternating current
flows along the inner conductor and the outer conductor. An
oscillating magnetic field (H field) circles the inner conductor.
Appendix A - Theory and Application (Continued)
Attenuation
A wave loses energy (attenuates) in several ways: (1) The
resistance of the inner and outer conductors is small but can
be significant over long lengths and will produce some heat.
(2) The dielectric may be lossy; its resistance is high but not
infinite, and some energy is lost. (3) Electromagnetic energy
radiates at high frequencies; significant energy losses are
caused by radiation of electromagnetic energy (the cable
acts like an antenna). (4) Energy is reflected due to
impedance mismatches. The combination of these four
types of losses are referred to as the insertion loss of a
transmission line system. Connectors have similar losses.
Characteristic Impedance
A parameter which defines the behavior of a cable,
connector, or any propagating system is Characteristic
Impedance, Zo. The characteristic impedance of a loss-
less cable is related to the inductance per unit length, L,
and the capacitance per unit length, C, as follows:
Zo = L/C in ohms
The equivalent circuit of a transmission line is shown in Figure
15. R represents the conductor resistance for a unit length
For a coaxial cable the characteristic impedance is given by:
138 D
Zo = x Log10 in ohms
εd
where D is the inner diameter of the outer conductor and
d is the outer diameter of the inner conductor, respectively.
Similar equations apply for other geometries such as two
parallel wires.
Figure 15
Typical Transmission Line Schematic
The maximum power is transferred between two systems if
they have the same impedance. This is called impedance
matching. However, impedance variations that are short
compared to a wavelength can have a negligible effect on
signal loss.
Standard impedances are 50 ohm, 75 ohm and 93-125
ohm. Most systems use 50 ohm because it is a compro-
mise between maximum power transmission and minimum
line loss. The telephone industry and the broadcast indus-
try use 75 ohm for minimum line attenuation. The need for
low capacitance instrumentation cable has produced the
93-125 ohm systems. The higher impedances are gener-
ally achieved by changing the conductor diameters and by
modifying the dielectric material to add air.
LR
C
Z0
Reflections
When the characteristic impedance changes in a transmis-
sion line system, part of an incident wave is reflected. The
reflection coefficient can be calculated as:
Vi ZR- ZO
Reflection Coefficient = ρ= _____ = _______
VR ZR+ ZO
Where Vi and ZO are the incident voltage and impedance
of the first media. VRand ZRrepresent the reflected voltage
and impedance of the media that caused the reflection.
The decibel loss due to reflection is given by:
1
Return Loss = 10 Log10 ( ____ ) dB
1-ρ2
VSWR
The traditional way to determine the
reflection coefficient is to measure
the standing wave caused by the
superposition of the incident wave
and the reflected wave. Traditionally
the voltage is measured at a series
of points using a slotted line. The
ratio of the maximum divided by the
minimum is the Voltage Standing
Wave Ratio (VSWR). The VSWR is
infinite for total reflections because
the minimum voltage is zero. If no
reflection occurs the VSWR is 1.0.
VSWR and reflection coefficient are
related as follows:
VSWR = (1 + ρ)/(1 - ρ)
Most present instrumentation
measures the reflection coefficient
and calculates the VSWR.
Figure 16 represents the direct
relationship between VSWR and its
equivalent in return loss
(expressed in dB).
Figure 16
VSWR vs. Return Loss
Multiple Reflections
If there is a series of impedance changes, each one will
have a reflection coefficient. The total reflection coefficient
is the vector addition of each of the individual coefficients
accounting for the distance between reflections and the
reflection of any reflected waves. Even though the calcula-
tions are difficult, a total VSWR can still be measured.
Multiple reflections can produce a resonance phenomenon
that is unique to wave theory. Properly understood some
serious difficulties can be avoided. An example will make
the point clear. Consider an electromagnetic wave with a
275
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
276
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix A - Theory and Application (Continued)
Figure 17
Multiple Wave Reflections
(Caused by Impedance Mismatch)
λ/4
λ/4
25 Ω50 Ω50 Ω
.66V
.33V
.15V
.44V
.07V
.22V
V outV in
1 V out
Impedence
Mismatch
V in = 1 Volt VR =.48 Volt V out =.52 Volt
In summary, avoid cable lengths, printed circuit board
paths, or connectors that are multiple of one quarter (λ/4,
3λ/4, etc.) of the intended signal transmission wavelength.
Coaxial cables, when manufactured, also have periodic
variations in diameter that result in periodic changes in
impedance (Zo), that can cause significant levels of
reflected signal (high return loss) at specific frequencies.
Reflections of Digital Signals
The previous discussions dealing with attenuation,
reflections and standing waves can apply to digital signals
with some extra thought.
A single pulse can be thought of as a combination of high
frequency sine waves. The maximum frequency component
in a square wave pulse can be calculated by this equation:
f = 0.35/rise time
where
f = GHz when “t” is in nanoseconds
Attenuation of the frequencies necessary to support the short
risetime will produce a slower rise and possibly prohibit the
pulse from ever reaching the detector. This ‘slurring’ of the
pulse is similar to the behavior of an RC circuit and the
attenuation is sometimes called capacitive attenuation.
A series of pulses can demonstrate resonance. If a
portion of a pulse is reflected at each interface, it is possi-
ble for them to come together and add up to form a new
phantom pulse.
The critical frequency here is the bit rate. Think of a sine
wave with a frequency the same as the bit rate; if it will
resonate in the cable, the pulses will also. Extra pulses
caused by resonance might easily result in an error signal
from the receiving system requesting a retransmittal. The
final result would be a communication system that is much
slower than intended.
Cut-off Frequency
The cut-off frequency of a coaxial transmission line is the
frequency at which modes of energy transmission, other
than the “TEM” mode, can be generated.
7.5
fco = ______ (in GHz)
ε (D+d)
(D and d are measured in inches)
Types of Transmission Lines
Twin Lead transmission cable is generally used where
impedance matching alone is important, since it provides
only minimal shielding. Impedance values of 300 ohms
and 600 ohms are common. Lower impedance values
require closer spacing of the conductors and are not nor-
mally available in this type of cable. A typical application for
twin lead cable is in antenna lead wire for television sets.
Twisted Pair is a variation of the twin lead type. It consists
of two lengths of ordinary hookup wire twisted together.
A twisted pair provides relatively constant impedance plus
better magnetic shielding than twin lead cables. It is flexi-
ble, inexpensive, easy to terminate and is used extensively
by the computer industry. However, it should not be used
when maximum shielding is required.
wavelength of 4 inches traveling on a cable that changes
from 50 ohms to 25 ohms. The reflection coefficient is -.33,
which means that one third of the incident voltage is reflected
toward the source. Assume that one inch (one quarter wave-
length) down the cable the impedance changes back to 50
ohm. Again, one third of the wave is reflected, but without
any phase shift. It travels back to the first interface where one
third of this reflected wave is reflected back toward the sec-
ond interface. Two thirds of the wave is transmitted through
the interface and travels back to the source. Since the first
(reflected) wave is shifted 180 degrees at the reflection, and
the second (transmitted-reflected-transmitted) wave is shifted
180 degrees because it traveled the one inch separation
twice, the two waves are in phase. The net result is that the
VSWR is much larger because the length of the 25 ohm sec-
tion was just the right length to cause a resonance. If the
length of the 25 ohm section had been one half wave-
length, the two waves would have interfered and the VSWR
would be at a minimum.
7.5
ε (D+d)
fco = (in GHz)
Appendix A - Theory and Application (Continued)
Shielded Twisted Pair Cable is used to eliminate inductive
and capacitive coupling. Twisting cancels out inductive
coupling, while the shield eliminates capacitive coupling.
Most applications for this cable are between equipment,
racks and buildings.
Flexible (Braided) Coaxial Cable is by far the most
common type of closed transmission line because of its
flexibility. It is a coaxial cable, meaning that both the signal
and the ground conductors are on the same center axis.
The outer conductor is made from fine braided wire, hence
the name “braided coaxial cable”. This type of cable is
used in practically all applications requiring complete shield-
ing of the center conductor. The effectiveness of the shield-
ing depends upon the weave of the braid and the number
of braid layers. Tyco Electronics manufacturers connec-
tors for cable sizes ranging from less than 1/8 in. diameter,
for low power applications of around 50 watts, to over 1/2
in. diameter for power of 850 watts at 100 MHz and volt-
ages up to 5000. In addition to power handling capabili-
ties, cables are available for high frequency applications,
high and low temperature applications, severe environ-
mental applications and many other specialized uses.
Triaxial Cable is used when higher “shielding” efficiency
characteristics are required in applications similar to those
using shielded twisted pair cable.
Figure 18
Twin Conductor and Triaxial Cable
Outer Conductor
Outer Conductor
Insulation
Insulation
Dielectric
Dielectric
Dielectric Middle Conductor
Signal
Conductors
Signal
Conductors
Often you will hear the term “shielded cable”. This is very
similar to coaxial cable except the spacing between center
conductor and shield is not carefully controlled during
manufacture, resulting in non-constant impedance.
Semirigid Coaxial Cable uses a solid tubular outer
conductor rather than the braided type, so that all the RF
energy is contained within the cable. One of the draw-
backs of braided cable is that the shielding is not 100%
effective, especially at higher frequencies. This is because
the braided construction can permit small amounts of short
wavelength (high frequency) energy to radiate. Normally
this does not present a problem; however, if a higher
degree of shielding is required, semirigid coaxial cable is
recommended. For applications using frequencies higher
than 30 GHz a miniature semirigid cable is recommended.
Various connectors are available from Tyco Electronics to
terminate these cables.
Ribbon Coaxial Cable is a relatively recent Tyco Electronics
innovation which combines the advantages of both ribbon
cable and coaxial cable. Tyco Electronics currently pro-
vides both the cable and the insulation displacing coaxial
connector to terminate the cable. Each individual coaxial
cable consists of the signal conductor, dielectric, a foil
shield and a drain wire which is in continuous contact with
the foil. The entire assembly is then covered with an outer
insulating jacket. The unique manufacturing feature of this
cable is the precise placement of the drain wires to permit
gang stripping of the outer jacket and foil. The major
advantage of this cable is the speed and ease with which it
can be mass terminated with the Tyco Electronics insulation
displacement technique. They can also be separated into
individual coaxial lines and terminated with standard coax-
ial connectors as required.
Figure 19
Shielding Efficiencies
9
8
7
6
5
4
-1000
-200
-100
-80
-60
-40
-30
-20
-300
Double Braid
Single Copper Braid
Triax
Solid Sheath
.01 GHz.1 GHz10 GHz
1 GHz
-10
277
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
278
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix B - White Bronze
High Quality Surface
Plating & Excellent
Intermodulation
Performance for RF
Connectors
Product Facts
■Low intermodulation
■High corrosion resistance
■Low porosity
■Low RF losses
■Wear and scratch resistance
The Tyco Electronics White
Bronze surface finish repre-
sents a dramatic improve-
ment upon the wear
characteristics and life
expectancy of silver plating,
at the same time offering a
far better electrical perform-
ance than nickel. White
Bronze plated connectors
exhibit intermodulation
characteristics significantly
better than stainless steel
or nickel plated products.
Silver has always been the
preferred finish from an
electrical standpoint but its
corrosion and wear charac-
teristics especially in harsh
conditions are often unac-
ceptable. While nickel is an
extremely rugged finish it
has properties undesirable
in many RF applications;
including, high RF and
insertion losses, poor inter-
modulation performance,
high permeability and poor
screening effectiveness.
The Tyco Electronics White
Bronze is composed of
copper, tin and zinc which
are applied simultaneously
to produce a finished color
similar to stainless steel.
With one of the most
advanced industrial electro-
plating facilities in the world
Tyco Electronics can
achieve the levels of control
over the complex galvanic
process necessary in the
application of this alloy.
The Tyco Electronics White
Bronze is similar in compo-
sition and performance to
other copper/tin/zinc alloys
developed in the industry
such as Sucoplate®and
BBR.
Comprehensive condition-
ing tests have been per-
formed to provide a
thorough evaluation of The
Tyco Electronics White
Bronze plated connector
bodies. The tests were per-
formed to the specifications
of the European and
International RF connector
standards — CECC
22000/IEC 68-2-14/
IEC 169-1. The results are
summarized on page 280.
Need more information?
Call Technical Support
Center at 1-800-522-6752
for product and tooling
information.
The Technical Support
Center is staffed with
specialists well versed in all
Tyco Electronics products.
The Center can provide
you with:
■Engineering Support
■Catalogs
■Technical Documents
■Product Samples
■Tyco Electronics
Authorized Distributor
Locations
■Tyco Electronics Internet
Home Page:
www.tycoelectronics.com
Tyco Electronics’ industrial electroplating facilities is one of the most advanced in the world.
Deposit Characteristics
Composition —Copper (55-60%),
Tin (20-25%), Zinc (15-20%)
Density —7.9-8.1 g/cm3
Hardness —300-380 HV
Passivation —Immersion Chrome
Sucoplate® is a plating trademark for
Huber & Suhner.
BBR is a plating trademark for Radiall.
Appendix B - White Bronze (Continued)
Low Intermodulation
Products
Dissimilar metals, finishes
and discontinuities within a
coaxial line structure give
rise to Intermodulation
Products (IMP). This is of
particular concern in appli-
cations requiring low levels
of intermodulation, such as
cellular base stations and
antennas. White Bronze
plated connectors offer bet-
ter IMP performance and
lifetime characteristics than
nickel. Due to the similarity
of electrolytic potentials and
the non magnetic proper-
ties of the finish, levels of
intermodulation are com-
mensurate with silver and
far in excess of stainless
steel/nickel connectors. At
the same time the excellent
wear characteristics and
durability of the finish
ensure that the intermodula-
tion life of the connector is
greater than silver. The life
is also improved as a direct
result of the excellent corro-
sion resistance properties
of White Bronze; thereby
minimizing metal/metal
oxide junctions.
Highly Corrosion Resistant
Even under continuous
exposure to harsh environ-
ments White Bronze retains
its aesthetic appearance.
Unlike silver it does not
discolor when exposed to
sulphur, potassium sul-
phides etc., neither is there
any build up in oxide layers
as is the case with nickel.
Furthermore, White Bronze
parts have successfully
passed all international salt
spray tests (MIL, BS,
CECC, IEC).
In conditions of continu-
ously high temperatures
(>100°C) and/or excessive
humidity (>100%) there is
no build up of foreign layers
which may affect contact
resistance.
Low Porosity and No
Reaction with Contact
Surfaces
Less than 2µm of White
Bronze is needed to create
a completely nonporous,
corrosion resistant surface.
Tyco Electronics applies
White Bronze to a thickness
of between 2µm and 3µm.
This compares favorably
with the typical plating
thickness of nickel (>10µm)
and consequently, varia-
tions in plating depth are
significantly less.
White Bronze does not alloy
with brass and since its
coefficient of expansion is
virtually identical to that of
brass, rapid temperature
shocks (-50°C/200°C) do
not cause blistering or
cracking of the plating.
The electrolytic potential of
White Bronze is approxi-
mately that of brass.
Consequently, any White
Bronze plated connectors
in contact with stainless
steel, silver, nickel or nickel
containing finishes carry no
risk of corrosion as a result
of any chemical potential
difference.
Low RF Losses
The relative permeability
(µr) of the Tyco Electronics
White Bronze is 1 giving
rise to low RF losses even
at high frequencies. As a
direct result of the good
conductivity of the finish,
skin depth is minimized fur-
ther reducing insertion loss
and ensuring a better
impedance match across
the frequency range of the
connectors.
Non Magnetic Finish
The Tyco Electronics White
Bronze contains no ferrous
materials and so has no
magnetic properties. This is
particularly desirable in
many RF applications.
Wear and Scratch Resistant
The hardness of the
Tyco Electronics White
Bronze at 300-380HV is
more than double that of sil-
ver and marginally harder
than platings containing
nickel. This gives a scratch
resistance which is rarely
surpassed and makes it
ideal for high mating
applications.
279
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
280
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix B - White Bronze (Continued)
White Bronze is available on all
products, including 7-16, N, TNC,
OSP and SMA.
Low Coefficient of Friction
The coefficient of friction
is approximately 70% that of
silver to give lower insertion
forces and smoother
coupling. These properties
combine to produce a
harder wearing, longer last-
ing finish which prolongs
connector life and reduces
the ongoing cost of
ownership.
Tyco Electronics’ White
Bronze
Environmental Test
Four groups of conditioning
tests were performed to pro-
vide a comprehensive evalu-
ation of the Tyco Electronics
White Bronze plated con-
nector bodies. The tests
were performed to the spec-
ifications of the European
and International RF con-
nector standards - CECC
22000/ IEC 68-2-14/IEC 169-
1. Full details and relevant
data are available from
Tyco Electronics and results
are summarized below.
Test 1 - Industrial Atmosphere
& Temperature
Endurance
1.1 Industrial Atmosphere
Exposure to Sulphur Dioxide
Atmosphere (as specified in
IEC 68-2-42 Test Kc) for 21
days of mated connectors,
previously subjected to 500
matings, to determine the
influence of sulphur dioxide
on the corrosion resistance
properties of White Bronze
Plating. Contact resistance
measured after matings
and sulphur dioxide expo-
sure was less than 5%
(0.23mohm) of the permissi-
ble specification.
1.2 High Temperature
Endurance Exposure to
temperatures of 85°C ±5°C
for 250 hours, to determine
the impact of prolonged
high temperatures on plating
adhesion. Prior to testing
the connectors were subject
to 500 matings. Results
showed no visual deteriora-
tion in plating finish (blister-
ing, cracking etc.) and the
results of outer conductivity
performance were compara-
ble to Test 1 (above).
Test 2 - Rapid Temperature
Change & Damp Heat
Steady State
2.1 Rapid Temperature
Change Exposure to -55°C
and +85°C for 15 minutes,
transition time 2-3 minutes,
50 cycles. To determine
possible plating deteriora-
tion caused by prolonged
and rapid temperature
change. No visual deterio-
ration, outer conductivity
performance were compa-
rable with Test 1 (above).
2.2 Damp Heat Steady
State Exposure to 93% rel-
ative humidity (at 40°C) for
10 days. To determine plat-
ing adhesion. No visual
deterioration, outer conduc-
tivity performance were
comparable with Test 1
(above).
Test 3 - Soldering Heat
3.1 Resistance to Soldering
Heat Exposure to concen-
trated soldering heat
(250°C) for 10 seconds to
evaluate any possible dete-
rioration in plating finish.
No deterioration detected.
Test 4 - Salt Mist &
Mechanical Endurance
4.1 Salt Mist
Exposure to salt mist spray
(as defined in BS 2011 Pt.
2.1 Ka) for 48 hours to eval-
uate the uniformity of pro-
tective coatings, any visual
deterioration, or impact on
electrical performance. No
visual deterioration, outer
conductivity performance
were comparable with Test
1 (above).
4.2 Mechanical Endurance
Electrical and visual evalua-
tion of the connectors after
500 matings to determine
any electrical or visual
deterioration. No visual
deterioration, outer conduc-
tivity performance were
comparable with Test 1
(above).
Availability and Ordering
Tyco Electronics offers
White Bronze on all prod-
ucts including 7-16, N,
TNC, SMA and OSP.
For more information on
White Bronze contact your
local Tyco Electronics Sales
Office.
Appendix C - Intermodulation in RF Coaxial Connectors
Product Facts
■High quality plating to 6µm
for IM-sensitive products
■Restrict materials to copper
and its alloys
■Avoid the use of stainless
steel, nickel, ferrites, etc.
in the signal path
■Quality machining
■Ensure, by design, a prop-
erly defined contact inter-
face at connector, panel and
contact interfaces
■Avoidance of crimps
The increased demand from the mobile
communication industry to provide greater
channel capacity coupled with the increased
sensitivity of receivers has exposed a condi-
tion within RF Coaxial Connectors referred to
as Intermodulation Distortion (IMD). This
condition occurs when non-linearities within
the connectors act as imperfect diodes to
generate other frequencies known as
Intermodulation Products (IMP). Some of
these frequencies appear within the receive
band and effectively block the channel. The
purpose of this application note is to outline
the basic causes of Intermodulation and the
techniques Tyco Electronics has undertaken
to minimize this condition.
IM Basics
Modern developments in base stations for
GSM, DCS 1800 and PCS 1900 have
necessitated the use of “7-16”, “4.1/9.5”
and “N” connectors due to the increased
power requirements. The requirements for
performance are typically in the order of -
160 dBc to -163dBc (when working in dBc)
or -120dBm (when working in dBm), both
with 2 x (+43dBm) tones. The requirement
is so stringent because the connectors are
used in post-filtering sections of the transmit
path (between the diplexer and the
antenna) and also because the system is a
full duplex system where the multiple-carrier
transmit path is also the receive path. In a
truly linear system, the output is directly
proportional to the input, following the form
of y=mx+c (see fig. 2). Coaxial connectors
have traditionally been viewed as following
this pattern. In reality, there have always
been non-linearities present in coaxial con-
nectors. These were not readily apparent as
the resultant IM products were significantly
below the noise floor of the system due to
relatively weak carrier signals. This situation
becomes apparent when the incident power
is raised above 30 dBm.
The small non-linearities have a character-
istic similar to a square-law (see Fig 3). The
distortion to the waveform is evident, the
Linear vs. Non-linear Response
12
10
8
6
4
2
0
120
100
80
60
20
0
Non-linearLinear
Fig. 2 Fig. 3
40
Need more information?
Call Technical Support at
the numbers listed below.
Technical Support is staffed
with specialists well versed
in all Tyco Electronics
products. They can provide
you with:
■Technical Support
■Catalogs
■Technical Documents
■Product Samples
■Tyco Electronics
Authorized Distributor
Locations
281
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
282
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix C - Intermodulation in RF Coaxial Connectors (Continued)
Spectrum of products in a 2-tone system
Frequency (MHz)
Fig. 4
Rx band
Tx
band
3F1-2F2
F1 F1
4F1-3F2
2F1-F2 2F2-F1
3F2-2F1
4F2-3F1
Carriers
%
120
100
80
60
40
20
0
Potential causes of IM in Coaxial Connectors
There are numerous factors which can affect intermodula-
tion performance in RF coaxial connectors. Identified
below are the most likely sources of concern:
■Contaminated plating solution
■Insufficient plating thickness
■Corrosion
■Dissimilar metals in intimate contact
■Magnetic materials in the signal path
■Low contact pressure
■Less than 360-degree contact
■Poor surface finish
■Debris and dust within the connector
■Convoluted signal path
Remedies for IM in RF Coaxial Connectors
To combat the above identified IM sources, Tyco Electronics
undertakes precautions during the design and manufacture of
the product, as summarized below:
■High quality plating to 6µm for IM-sensitive products
The plating must also be free from contaminants and properly
passivated with a chromate passivate. Silver has been the
preferred plating material as it possesses the lowest practical
resistivity thereby minimizing interface contact resistances.
Tyco Electronics also offers a unique White Bronze plating
finish which provides excellent durability, tarnish resistance
and non-magnetic properties ideal for low intermodulation.
During testing with a system noise floor of -145 dBm, the differ-
ence in performance between the Tyco Electronics silver-plat-
ing and the Tyco Electronics White Bronze finish is not
discernible (refer to White Bronze Application Note 1307057).
■Restrict materials to copper and its alloys.
This ensures maximum plating adhesion and minimum electro-
chemical potential difference between the base materials and
their over-platings.
■Avoid the use of stainless steel, nickel, ferrites, etc. in the
signal path
Magnetic and para-magnetic materials will only compound
non-linearites and give poorer interface contact resistances.
During experimentation, Tyco Electronics discovered a degra-
dation in performance of 20dB when nickel plate was used.
The presence of magnetic or para-magnetic materials will also
cause the forward IMP figure to differ from the reverse IMP.
■Quality machining
Surface finish is paramount. The signal propagates within a
“skin” if this skin is too rough, the signal will repeatedly transition
through metal and surface oxide layers, thereby creating the
same effect as a poor panel contact (see fig. 5). For IM-sensitive
designs Tyco Electronics ensures 0.4µm is the maximum.
■Contact design
This primarily affects the connector interface. Repeated
matings can generate small amounts of plating from the indi-
vidual parts. These oxidize and interfere with the mechanical
(and therefore electrical) mating of connectors. The oxidized
debris gives further rise to metal and surface oxide junctions
and consequently, higher IM products.
■Ensure, by design, a properly defined contact interface at
connector, panel and contact interfaces
Insufficient contact force will give rise to metal to oxide junc-
tions. The classic rectifiers were metal oxide by composition.
Axial maximum material condition at the connector interface is
critical in order to ensure minimum mismatch and maximum
Effect of surface roughness
Fig. 5
1.5
0.5
0
-0.5
-1.5
-1
1Oxide
Signal flow
Metal
Air
positive 1/2 cycle being significantly greater in amplitude
than the negative 1/2-cycle. When converted to the fre-
quency domain, this waveform consists of the desired fun-
damental plus a decaying series of related harmonics that,
in themselves, interact with other carriers present on the
transmission line.
The effect of this interaction produces additional frequen-
cies, some of which occur where they are least wanted
(see fig. 4). The 2F1-F2 (3rd order IMP), 3F1-2F2 (5th order
IMP) and 4F1-3F2 (7th order IMP) products can all mani-
fest in the receive band and, if sufficiently large, effectively
block a channel by making the base station receiver think
that a carrier is present when one is not.
IM Basics (Continued)
Appendix C - Intermodulation in RF Coaxial Connectors (Continued)
potential of a butt-contact. Panel interfaces generally concern the
physical contact of the connector body to the panel. In this case,
it has been determined that a protruding feature as close as
possible to the body bore will give the best IM performance. The
applied mounting force is concentrated in the surface area of the
protrusion which, on engagement with the panel, punctures the
existing oxide layer to give a metal-to-metal, gas-tight junction.
■Avoidance of crimps
Crimps, by nature, can only give multiple point-contact rather
than 360-degree contact and also cause a variability in the
position of electrical contact during dynamic testing. IM prod-
ucts will therefore be greater. It has been found that soldered
center contacts and clamp/solder outer contacts give the best
static and dynamic IM performance.
Improving IM Connector Design
Tyco Electronics continues to pursue design techniques which
improve intermodulation performance to address emerging
telecommunication market needs. A state of the art intermodu-
lation test facility and participation on the international (IEC
SC46D WG5) committee to develop standard test practices
ensures our commitment to the understanding of intermodula-
tion characteristics. This applied technology base is instrumen-
tal in developing innovative low intermodulation products for
7-16, Type N, SMA and OSP interfaces.
Most commonly asked questions regarding Intermodulation
Why is intermodulation such a concern for cellular
infrastructure equipment?
The primary concerns for cellular service providers today
are channel efficiency and clarity of transmission. Growth in
demand for mobile communications has created a need to
operate equipment at greater capacities and reliability to
service the competitive market. Intermodulation degrades or
limits the ability of the service provider to operate at optimal
levels of performance and may ultimately cause subscribers
to experience poor call quality. Intermodulation has become
an important factor in system selection to ensure the best
possible network service.
Where is intermodulation most likely to occur in cellular
infrastructure equipment?
Intermodulation is typically of greatest concern between the
filtering elements of the system and the antenna. The introduc-
tion of higher power levels for the transmit side of the equip-
ment creates greater potential for intermodulation to occur.
This is why the majority of focus for intermodulation concerns
7-16, Type N, SMA and 4.1/9.5 connector interfaces.
Is intermodulation a recent development?
Intermodulation has always been inherently present in RF coax-
ial connectors but may be relatively imperceptible in some
devices for a variety of reasons. The amount of power applied
to an RF connector determines the relative IM threshold which
can be observed. Intermodulation is therefore more likely to
cause concern in a higher power system, for example, utilizing
a 7-16 connector interface rather than an equivalent low power
OSX solution. The trend toward higher power digital cellular
systems creates the need for greater intermodulation sensitivity.
What is the best method of cable attachment for IM sensi-
tive cable assembly applications?
Soldering and clamping are preferred methods due to the
360-degree point of contact created at the cable to connector
interface. Such intimate contact improves the overall contact
resistance leading to improved IM characteristics. In addition,
it is also better to solder the center conductor of the connector
to the cable versus crimping due to the improved contact
resistance path and elimination of voids.
Are there ways to test for intermodulation in an RF coaxial
connector?
Yes, very sophisticated methods are needed to test for inter-
modulation in RF connectors. The test system must utilize
extremely sensitive filtering or clean amplification so that the
equipment itself has a very low intermodulation noise floor.
There is not yet a standardized approach to testing, although
an international committee has been formed in the connector
industry to address the situation. Tyco Electronics has a state
of the art test facility where our designs are optimized for low
intermod performance and where further analysis on the
effects of this phenomena can be studied.
Is intermodulation in coaxial connectors frequency
dependent?
No. Because coaxial connectors are broadband devices there
is no frequency dependency. Some apparent variability can
be detected during testing but this is not due to the connector.
The impedance matches of the output diplexer/triplexer and
terminations are the causes of the variations and should not
be incorrectly attributed to the connector/assembly.
Tyco Electronics Interconnect Business Unit has demonstrated
that by varying the impedance match of the test station termi-
nation, a DUT can show 15dB better IMP3than exists in reality.
IMP3in mixers follows a 3dB/dB relationship.
What is it for connectors?
The relationship is identical. Taking the 3rd order (2F1-F2):
varying the power of F2 gives an IMP3relationship of 1dB/dB
whereas varying the power of F1 gives a relationship of 2dB/dB
as the IMP is derived from the 2nd harmonic of F1. This gives a
total of 3dB/dB when symmetrically varying both carrier powers.
I am buying a complete cable assembly from
Tyco Electronics. How do I interpret the IMP result now?
With caution! It is the Tyco Electronics policy when testing
devices to move away from the normal static test to a dynamic
test where the cable termination interfaces are mechanically
exercised during live IM conditions. It is also a good indicator
to customers of the build quality of the assemblies. A dynamic
evaluation has shown 15dB degradation in IMP performance
for poor assemblies and even as much as 50dB for bad
ones.It is therefore strongly advisable that IM performance fig-
ures are stated in the context of a dynamic measurement.
1.
2.
3.
4.
5.
6.
7.
8.
Remedies for IM in RF Coaxial Connectors (Continued)
283
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
284
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications
Abbreviations
Dielectric
PE .................Solid polyethylene
PTEE .............Solid polyetrafluoroethylene
PIB................Polyisobulylene, Type B, per MIL-C-17
Rubber ..........Per MIL-C-17D
Sil .................Silicone rubber
PS.................Polystyrene
Conductors and Braid Materials
AL .................Aluminum
SCAAI ...........Silver covered copper covered aluminum
BC.................Bare copper
SC.................Silver covered copper
CCS ..............Copper covered steel
TC.................Tinned copper
SCCS............Silver covered copper covered steel
SCCad Br......Silver covered cadmium bronze
GS.................Galvanized steel
TCCS ............Tin copper covered steel
SSC ..............Silver covered strip
HR.................High resistance wire
SA.................Silver covered alloy
Jacket Material
PVC-I............Black polyvinylchloride, contaminating, Type I, per MIL-C-17D
PVC-II...........Gray polyvinylchloride, noncontaminating, Type II, per MIL-C-17D
PVC-IIA.........Black polyvinylchloride, noncontaminating, Type IIA, per MIL-C-17D
PE-III.............Clear polyethylene
PE-IIIA ..........High molecular weight, black polyethylene, Type IIIA, per MIL-C-17D
FG Braid V ....Fiberglass, impregnated, Type V, per MIL-C-17D
FEP-IX ..........Fluorinated ethylene propylene, Type IX, per MIL-C-17D
PUR ..............Polyurathane, black specific compounds
SIL/DAC-VI...Dacron braid over silicone rubber, Type VI, per MIL-C-17D
Rubber ..........Per MIL-C-17D
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
0.81 BC .295 5.74
4.0320 PE .116 2/BC PVC-1 .226 .025 50 30.8 40 80 1900 Use RG 58C
1.29 BC 4.7 8.43 Use up to
5.0508 PE .185 2/BC PVC-1 .332 .088 52.5 28.5 40 80 3000 100 MHz
1.29 SC 4.6 8.33
5A .0508 PE .181 2/SC PVC-II .328 .088 50 30.8 40 80 3000 Use RG 212
1.29 SC 4.6 8.33
5B .0508 PE .181 2/SC PVC-IIA .328 .087 50 30.8 40 80 3000 Use RG 212
0.72 CCS 4.7 2/Inner SC 8.43
6.0285 PE .185 Outer BC PVC-II .332 .081 76 20.0 40 80 2700 Use RG 6A
0.72 CCS 4.7 2/Inner SC 8.43 Good Attenuation
6A .0285 PE .185 Outer BC PVC-IIA .332 .082 75 20.6 40 80 2700 Stability
0.91 BC Air-Space 6.35 9.4
7.0359 PE .250 1/BC PVC-I .370 .080 95 12.5 40 80 1000 Use RG 63B
2.17
.0855 7.24 10.29
87/0.72 BC PE .285 1/BC PVC-I .405 .106 52 29.5 40 80 4000 Use RG 213
.0285
2.17
.0855 7.24 10.29
8A 7/0.72 BC PE .285 1/BC PVC-IIA .405 .106 52 29.5 40 80 5000 Use RG 213
.0285
2.17
.0855 7.11 2/Inner SC 10.67
97/0.72 SC PE .280 Outer BC PVC-II .420 .140 51 30.0 40 80 4000 Use RG 214
.0285
2.17
.0855 7.11 10.67
9A 7/0.72 SC PE .280 2/SC PVC-II .420 .140 51 30.0 40 80 4000 Use RG 214
.0285
2.17
.0855 7.11 10.67
9B 7/0.72 SC PE .280 2/SC PVC-IIA .420 .150 50 30.8 40 80 5000 Uase RG 214
.0285
2.17
.0855 7.24 PVC-II 11.76
10 7/0.72 BC PE .285 1/BC w/Armor .463 .146 52 29.5 40 80 4000 Use RG 215
.0285
2.17
.0855 7.24 PBC-IIA 11.76
10A 7/0.72 BC PE .285 1/BC w/Armor .463 .146 52 29.5 40 80 5000 Use RG 215
.0285
1.21
.0477 7.24 10.29 Use up to
11 7/0.4 TC PE .285 1/BC PVC-I .405 .096 75 20.6 40 80 4000 100 MHz
.0159
1.21
.0477 7.24 10.29 Use up to
11A 7/0.4 TC PE .285 1/BC PVC-IIA .405 .096 75 20.6 40 80 5000 1000 Mhz
.0159
1.21
.0477 7.24 PVC-II 11.76
12 7/0.4 TC PE .285 1/BC w/Armor .463 .141 75 20.6 40 80 4000 Use RG 12A
.0159
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
1.21
.0477 7.24 PVC-IIA 11.76 Use up to
12A 7/0.4 TC PE .285 1/BC w/Armor .463 .141 75 20.6 40 80 5000 1000 MHz
.0159
1.21
.0477 7.11 10.67
13 7/0.4 TC PE .280 2/BC PVC-I .420 .126 74 20.8 40 80 4000 Use RG 216
.0159
1.21
.0477 7.11 10.67
13A 7/0.4 TC PE .280 2/BC PVC-IIA .420 .126 52 20.8 40 80 4000 Use RG 216
.0159
2.59 BC 9.4 13.84
14 .1020 PE .370 2/BC PVC-II .545 .216 52 29.5 40 80 5500 Use RG 217
2.59 BC 9.4 13.84
14A .1020 PE .370 2/BC PVC-IIA .545 .216 76 29.5 40 80 7000 Use RG 217
1.45 CCS 9.4 13.84 Use up to
15 .0571 PE .370 2/BC PVC-I .545 .197 52 20.0 40 80 5000 1000 MHz
2.59 BC
16 .1250 PE 11.68 1/BC PVC-I 16 .254 52 29.5 40 80 6000 Use up to
Tube .460 .630 1000 MHz
4.78 BC 17.27 22.1 Use up to
17 .1880 PE .680 1/BC PVC-II .870 .460 52 29.5 40 80 11,000 1000 MHz
4.78 BC 17.27 22.1
17A .1880 PE .680 1/BC PVC-IIA .870 .460 52 29.5 40 80 11,000 Use RG 218
17B Cancelled, Reassigned New Nomenclature, RG 177
4.78 BC 17.27 PVC-II 23.50
18 .1880 PE .680 1/BC w/Armor .925 .585 52 29.5 40 80 11,000 Use RG 219
4.78 BC 17.27 PVC-IIA 23.57
18A .1880 PE .680 1/BC w/Armor .928 .585 52 29.5 40 80 11,000 Use RG 219
6.35 BC 23.11 28.45
19 .2500 PE .910 1/BC PVC-II 1.120 .740 52 29.5 40 80 14,000 Use RG 220
6.35 BC 23.11 28.45
19A .2500 PE .910 1/BC PVC-IIA 1.120 .740 52 29.5 40 80 14,000 Use RG 220
6.35 BC 23.11 PVC-II 29.92
20 .2500 PE .910 1/BC w/Armor 1.178 .925 52 29.5 40 80 14,000 Use RG 221
6.35 BC 23.11 PVC-IIA 29.92
20A .2500 PE .910 1/BC w/Armor 1.178 .925 53 29.5 40 80 14,000 Use RG 221
1.29
21 0508 PE 4.7 2/SC PVC-II 8.43 .087 53 29.0 40 80 2700 Use RG 222
High Res. Wire .185 .332
1.29
21A .0508 PE 4.7 2/SC PVC-IIA 8.43 .087 95 29.0 40 80 2700 Use RG 222
High Res. Wire .185 .332
2 Cond. 1.16
.0456 7.24 10.29 Balanced Line
22 7/0.39 BC PE .285 1/TC PVC-I .405 .105 95 16.0 40 80 1000 w/Twisted Cond.
.0152
2 Cond. 1.16
.0456 7.24 10.67 Balanced Line
22A 7/0.39 BC PE .285 2/TC PVC-II .420 .151 95 16.0 40 80 1000 w/Twisted Cond.
.0152
2 Cond. 1.16
.0456 7.24 10.67 Balanced Line
22B 7/.0.39 BC PE .285 2/TC PVC-IIA .420 .151 125 16.0 40 80 1000 w/Twisted Cond.
.0152
2 Cond. 2.17 2/Inidividual 16.51 x .490
.0855 9.65 Inner .650
23 7/0.72 BC PE,2 Cores .380 Common PVC-I 24 .490 125 12.0 40 80 3000 Use RG 23A
.0285 Outer BC .945
2 Cond. 2.17 2/Individual 16.51 x .490
.0855 9.65 Inner .650 Dual Coaxial
23A 7/0.72 BC PE,2 Cores .380 Common PVC-IIA 24 .490 125 12.0 40 80 3000 Balanced Line
.0285 Outer BC .945
2 Cond. 2.17 2/Individual 25.48
.0855 9.65 Inner PVC-I 1.003 2/Individual
24 7/0.72 BC PE,2 Cores .380 Common w/Armor 19.81 .670 .670 12.0 40 80 3000 Use RG 24A
.0285 Outer BC .780
285
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
286
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
2 Cond. 2.17 2/Individual 25.48
.0855 9.65 Inner PVC-IIA 1.003
24A 7/0.72 BC PE,2 Cores .380 Common w/Armor 19.81 .670 125 12.0 40 80 3000 Use RG 23A
.0285 Outer BC .780
1.49
.0585 7.32 12.83
25A 19/0.3 TC Rubber-E .288 2/TC Rubber-IV .505 .205 48 50.0 40 80 10,000 —
.0117
1.49
.0585 7.32 Rubber-IV 12.27
26A 19/0.3 TC Rubber-E .288 1/TC w/Armor .483 .189 48 50.0 40 80 10,000 —
.0117
2.35
.0925 11.56 Rubber-IV 16.59
27A 19/0.47 TC Rubber-D .455 1/TC w/Armor .653 .304 48 50.0 40 80 15,000 —
.0185
2.35
.0925 11.56 Rubber-IV 19.05
28B 19/0.47 TC Rubber-D .455 2/TC, GS w/Armor .750 .370 48 50.0 40 80 15,000 —
.0185
0.81 BC
.0320 2.95 4.67
29 1.21 PE .116 1/TC PE-111 .184 0.21 53.5 28.5 55 80 1900 Use RG 58
.0477
7/0.4 BC 4.7 6.35
30 .0159 PIB .185 1/BC PVC-I .250 .044 50 27.0 40 80 1500 Use RG 58
2.17
.0855 7.24 10.29
31 7/0.72 BC PIB .285 1/BC PVC-I .405 .106 51 31.0 40 80 2000 Use RG 213
.0285
2.17
.0855 7.24 PVC-I 11.81
32 7/0.72 BC PIB .285 1/BC w/Armor .465 .141 51 29.0 40 80 2000 Use RG 215
.0285
2.59 BC 9.4 11.94
33 .1019 PE 3.70 None Lead .470 .390 51 30.0 55 80 6000 —
2.17
.0855 11.56 15.88
34 7/0.72 BC PE .455 1/BC PVC-I .625 .224 71 21.5 40 80 5200 Use RG 31B
.0285
1.9
.0747 11.68 16
34A 7/0.63 BC PE .460 1/BC PVC-IIA .630 .224 75 20.6 40 80 6500 Use RG 34B
.0249
1.9
34B .0747 PE 11.68 1/BC PVC-IIA 16 .224 75 20.6 40 80 6500 Use up to
7/0.63 BC .460 .630 1000 MHz
.0249
2.91 BC
35 .1144 PE 11.68 1/BC PVC-II 23.57 .525 71 21.5 40 80 10,000
1.6 .460 w/Armor .928 Use RG 35B
0.63
2.65 BC 11.68 PVC-IIA 23.57
35A .1045 PE .460 1/BC w/Armor .928 .525 75 20.6 40 80 10,000 Use RG 35B
2.65 BC 11.68 23.57 Unarmored:
35B .1045 PE .460 1/BC PVC-IIA .928 .525 75 20.6 40 80 10,000 see RG 164
4.11 BC 23.11 29.97 Use up to
36 .1620 PE .910 1/BC PVC-I 1.180 .805 69 22.0 40 80 13,000 1000 MHz
0.81 TC 3.56 5.33
37 .0320 Rubber-C .140 1/TC PE-III .210 .040 52.5 38.0 55 80 750 —
1.15 TC 4.98 7.92
38 .0453 Rubber-C .196 2/TC PE-III .312 .110 52.5 38.0 55 80 1000 —
0.64 CCS 4.98 7.92
39 .0253 Rubber-C .196 2/TC PE-III .312 .100 72.5 28.6 55 80 1000 —
0.64 CCS 4.98 10.67
40 .0253 Rubber-C .196 2/TC Rubber IV .420 .150 72.5 28.0 40 80 1000 —
1.24
.0490 6.35 10.8
41 16/0.25 TC Rubber-IV .250 1/TC Rubber-IV .425 .150 67.5 27.6 40 80 3000 —
.0100
0.72
42 .0285 PE 4.98 2/SC PVC-II 8.69 .050 78 20.0 40 80 2700 Use RG 222
Res. Wire .196 .342
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
2 Cond. 2.17
.0855 11.99 15.67
43 7/0.72 BC Rubber-B .427 1/BC PVC-I .617 —9517.6 40 80 1500 Use RG 57
.0285
1.21
.0477 4.7 6.99
54 7/0.4 BC PE .185 1/BC PVC-I .275 .045 58 27.0 40 80 2500 Use RG 54A
.0159
1.16
.0456 4.52 6.22 Use up to
54A 7/0.39 BC PE .178 1/TC PE-III 2.45 .041 58 26.5 55 80 3000 1000 MHz
.0152
0.81 BC 2.95 5.08
55 .0320 PE .116 2/TC PE-III .200 .032 53.5 28.5 55 80 1900 Use RG 55B
.0.89 SC 2.95 5.08
55A .0350 PE .116 2/SC PVC-IIA .200 .034 50 30.8 40 80 1900 Use RG 223
0.81 SC 2.95 5.08 Use up to
55B .0320 PE .116 2/TC PE-IIIA .200 .033 53.5 28.5 55 80 1900 1000 MHz
1.49
.0585 7.82 13.59
56 19/0.3 BC Rubber-D .308 2/BC PVC-I .535 .243 48 50.0 40 80 8000 —
.0117
2 Cond. 2.17
.0855 11.99 15.88 Balanced Line
57 7/0.72 BC PE .472 1/TC PVC-I .625 .225 95 17.0 40 80 3000 Parallel
.0285
2 Cond. 2.17
.0855 11.99 15.88 Balanced Line
57A 7/0.72 BC PE .472 1/TC PVC-IIA .625 .225 95 17.0 40 80 3000 Parallel
.0285
0.81 BC 2.95 4.95
58 .0320 PE .116 1/TC PVC-I .195 .029 53.5 28.5 40 80 1900 Use RG 58B
0.9 2.95 4.95
58A .0355 PE .116 1/TC PVC-I .195 .029 52 28.5 40 80 1900 Use RG 58C
0.81 BC 2.95 4.95 Use up to
58B .0320 PE .116 1/TC PVC-IIA .195 .029 53.5 28.5 40 80 1900 1000 MHz
0.9
.0355 2.95 4.95 Extra Flexible
58C 19/0.8 TC PE .116 1/TC PVC-IIA .195 .029 50 30.8 40 80 1900 Version RG 58B
.0071
0.64 CCS 3.71 6.15
59 .0253 PE .146 1/BC PVC-I .242 .032 73 21.0 40 80 2300 Use RG 59B
0.64 CCS 3.71 6.15
59A .0253 PE .146 1/BC PVC-IIA .242 .032 73 21.0 40 80 2300 Use RG 59B
0.58 CCS 3.71 6.15 Use up to
59B .0230 PE .146 1/BC PVC-IIA .242 .032 75 20.6 40 80 2300 1000 MHz
1.29 Str. C 6.35 10.8
60 .0508 Rubber-C .250 1/BC Rubber-IV .425 .150 50 39.0 40 80 1100 —
0.64 CCS Air-space 3.71 6.15 Use RG 62A
62 .0253 PE .146 1/BC PVC-I .242 .038 93 13.5 40 80 750 Low
0.64 CCS Air-space 3.71 6.15
62A .0253 PE .146 1/BC PVC-IIA .242 .038 93 13.5 40 80 750 Capacitance
0.61
.0240 Air-space 3.71 6.15 Extra Flexible
62B 7/0.2 CCS PE .146 1/BC PVC-IIA .242 .038 93 13.5 40 80 750 RG 62A
.0080
0.64 CCS Air-space 7.24 10.29
63 .0253 PE .285 1/BC PVC-I .405 .083 125 10.0 40 80 1000 Use RG 63B
0.64 BC Air-space 7.24 10.29
63A .0253 PE .285 1/BC PVC-I .405 .083 125 10.0 40 80 1000 Use RG 63B
0.64 CCS Air-space 7.24 10.29 Low
63B .0253 PE .285 1/BC PVC-IIA .405 .083 125 10.0 40 80 1000 Capacitance
1.49 7.82 12.57
.0585 .308 .495 —
64 19/0.3 TC Rubber-D 7.24 2/TC Rubber-IV 10.29 .225 48 60.0 40 80 10,000 Capacitance
.0117 .285 .405
1.49
.0585 7.32 11.68
64A 19/0.3 TC Rubber-E .288 2/TC Rubber-IV .460 .205 48 50.0 40 80 10,000 —
.0117
0.2 [.0080]
Formex-F 7.24 10.29 High Impedance
65 3.25 [.1280] PE .285 1/BC PVC-I .405 .096 950 44.0 40 80 1000 Video Delay Line
Dia. Helix
287
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
288
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
.02 [.0080]
Formex-F 7.24 10.29 High Impedance
65A 3.25 [.1280] PE .285 1/BC PVC-IIA .405 .096 950 44.0 40 80 1000 Video Delay Line
Dia. Helix
0.64 CCS Air-space 3.71 6.22
71 .0253 PE .146 2/TC PVC-I .245 .046 93 13.5 40 80 750 Use RG 71B
0.64 CCS Air-space 3.71 6.22
71A .0253 PE .146 2/TC PE-III .245 .046 93 13.5 55 80 750 Use RG 71B
0.64 CCS Air-space 3.71 6.22 Low
71B .0253 PE .146 2/TC PE-IIIA .245 .046 93 13.5 55 80 750 Capacitance
0.64 CCS Air-space 11.68 16 Low
72 .0253 PE .460 1/BC PVC-I .630 .169 150 7.8 40 80 750 Capacitance
1.65 BC 2.95 Copper 4.45 Low
73 .0650 PE .116 2/BC Braid .175 .031 25 61.8 55 80 1000 Impedance
2.59 BC 9.4 PVC-II 15.32
74 .1020 PE .370 2/BC w/Armor .603 .310 52 29.5 40 80 5500 Use RG 224
2.59 BC 9.4 PVC-IIA 15.32
74A .1020 PE .370 2/BC w/Armor .603 .310 52 29.5 40 80 5500 Use RG 224
1.49
.0585 7.32 11.43 8000
77A 19/0.3 TC Rubber-E .288 2/TC PVC-IIA .450 .195 48 50.0 40 80 Peak —
.0117
1.49
.0585 7.32 10.67 8000
78A 19/0.3 TC Rubber-E .288 1/TC PVC-IIA .420 .149 48 50.0 40 80 Peak —
.0117
0.64 CCS Air-space 7.24 PVC-I 11.76 Low
79 .0253 PE .285 1/BC w/Armor .463 .136 — 10.0 40 80 1000 Capacitance
0.64 CCS Air-space 7.24 PVC-I 11.76 Low
79A .0253 PE .285 1/BC w/Armor .463 .130 .125 10.0 40 80 1000 Capacitance
0.64 CCS Air-space 7.24 PVC-IIA 11.76 Low
79B .0253 PE .285 1/BC w/Armor .463 .136 .125 10.0 40 80 1000 Capacitance
1.59 BC Magnesium 8.15 Copper 8.26
81 .0625 Oxide G .321 None Tube .325 .172 50 37.0 250 3000 —
3.18 BC Magnesium 16.51 Copper 19.05
82 .1250 Oxide G .650 None Tube .750 .698 50 36.0 250 5000 —
2.59 BC 6.1 10.29 Low
83 .1020 PE .240 1/BC PVC-I .405 .120 35 44.0 40 80 2000 Impedance
2.65 BC 17.27 PVC-IIA 25.4 RG 35B with
84A .1045 PE .680 1/BC w/Lead Sheath 1.000 1.325 75 20.6 40 80 10,000 Special Armor
2.65 BC 17.27 PVC-IIA 39.75 RG 84A with
85A .1045 PE .680 1/BC w/Lead Armor 1.565 2.910 75 20.6 40 80 10,000 Special Armor
2 Cond. 2.17
.0855 7.62 7.62
86 7/0.72 BC PE .300 x 16.51 None None .300 x 16.51 .100 200 7.8 55 80 10,000 Twin Lead
.0285 .650 .650
2.44
.0960 7.11 FG 10.8
87A 7/0.81 SC PTFE .280 2/SC Braid-V .425 .180 50 29.4 55 250 5000 Use RG 225
.0320
1.49
.0585 7.32 13.08
88 19/0.3 TC Rubber-E .288 4/TC PVC-I .515 .211 48 50.0 40 80 10,000 —
.0117
1.49
.0585 7.32 13.08
88A 19/0.3 TC Ruber-E .288 4/TC PVC-IIA .515 .211 48 50.0 40 80 10,000 —
.0117
1.49
.0585 7.32 14.35
88B 19/0.3 TC Rubber-E .288 4/TC Rubber-IV .565 .238 48 50.0 40 80 10,000 —
.0117
0.64 CCS Air-space 7.24 16.05 Low
89 .0253 PE .285 1/BC PVC-I .632 .195 125 10.0 40 80 1000 Capacitance
1.53
.0603 4.95 10.8 Excellent
90 7/0.51 SC PE .195 3/SC, GS, SC PVC-IIA .425 —5030.8 40 80 3000 Shielding
.0201
5.08
.2000 Taped 14.55 FG 18.03
93 19/1.02 BC PTFE .573 1/BC Braid-V .710 .475 50 29.4 55 250 10,000 Use RG 211A
.0400
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
2.86
.1125 Taped 7.42 FG 11.3
94 19/0.57 SC PTFE .292 2/BC Braid-V .445 .270 50 29.4 55 250 7000 Use RG 226
.0225
3.23
.1270 Taped 9.4 FG 12.7
94A 19/0.65 SC PTFE .370 2/BC Braid-V .500 .445 50 29.4 55 250 7000 Use RG 226
.0254
1.87
.0735 3.71 6.15 Use up to
100 19/0.37 BC PE .146 1/BC PVC-I .242 .046 35 44.0 40 80 2000 1000 MHz
.0147
1.63 BC 14.94
101 .0641 Rubber — 1/TC — .588 —75— — — —
2 Cond.
102 2.05 BC Rubber — 1/TC — 27.64 —140 — — — —
.0808 1.088
2 Cond. 0.96
.0378 2.01 5.97
108 7/0.32 TC PE .079 1/TC PVC-II .235 .032 78 19.6 40 80 1000 Use RG 108A
.0126 Each
2 Cond. 0.96
.0378 2.01 5.97
108A 7/0.32 TC PE .079 1/TC PVC-IIA .235 .032 78 19.6 40 80 1000 Balanced Line
.0126 Each
2 Cond. 1.16
.0456 7.24 PVC-II 12.14
111 7/0.39 BC PE .285 2/TC w/Armor .478 .146 95 16.0 40 80 1000 Use RG 111A
.0152
2 Cond. 1.16
.0456 7.24 PVC-IIA 12.14 Use RG 22B
111A 7/0.39 BC PE .285 2/TC w/Armor .478 .146 95 16.0 40 80 1000 w/Armor
.0152
0.18 CCS Air-space 7.24 10.29
114 .0070 PE .285 1/BC PVC-I .405 .087 185 6.5 40 80 1000 Use RG 114A
0.18 CCS Air-space 7.24 10.29 Low
114A .0070 PE .285 1/BC PVC-IIA .405 .087 185 6.5 40 80 1000 Capacitance
2.13
.0840 Taped 6.35 FG 9.53
115 7/0.71 SC PTFE .250 2/BC Braid-V .375 .148 50 29.4 55 250 5000 Use RG 115A
.0280
2.13
.0840 Taped 6.48 FG 10.54 Extra Flexible
115A 7/0.71 SC PTFE .255 2/BC Braid-V .415 .180 50 29.4 55 250 5000 RG 225
.0280
2.44
.0960 7.11 FG Braid-V 12.7
116 7/0.81 SC PTFE .280 2/SC w/Armor .475 .198 50 29.4 55 250 5000 Use RG 227
.0320
4.78 BC 15.75 FG 18.54
117 .1880 PTFE .620 1/BC Braid-V .730 .641 50 29.4 55 250 7000 Use RG 211A
4.78 BC 15.75 FG 18.54
117A .1880 PTFE .620 1/BC Braid-V .730 .641 50 29.4 55 250 7000 Use RG 211A
4.78 BC 15.75 FG Braid-V 19.81
118 .1880 PTFE .620 1/BC w/Armor .780 .682 50 29.4 55 250 7000 Use RG 228A
4.78 BC 15.75 FG Braid-V 19.81
118A .1880 PTFE .620 1/BC w/Armor .780 .682 50 29.4 55 250 7000 Use RG 228A
2.59 BC 8.43 FG 11.81 Use up to
119 .1020 PTFE .332 2/BC Braid-V .465 .225 50 29.4 55 250 6000 1000 MHz
2.59 BC 8.43 FG 13.28 RG 119
120 .1020 PTFE .332 2/BC Braid-V .523 .282 50 29.4 55 250 6000 w/Armor
0.76
.0300 2.44 4.06 Use up to
122 7/0.13 TC PE .096 1/TC PVC-IIA .160 .016 50 29.4 40 80 1900 1000 MHz
.0050
0.64 TCCS Taped 3.43 FG 6.1
124 .0253 PTFE .135 1/TC Braid-V .240 .210 73 20.3 55 250 2300 Use RG 140
0.4 CCS Air-space 11.68 15.24 Low
125 .0159 PE .460 1/BC PVC-IIA .600 .180 150 7.8 40 80 2000 Capacitance
1.55
.0609 4.7 FG 7.11 High
126 7/0.52 HR PTFE .185 1/HR Braid-V .280 .070 50 29.4 55 250 3000 Loss Cable
.0203
289
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
290
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
2 Cond. 2.17
.0855 11.99 15.88 RG 57 w/
130 7/0.72 BC PE .472 1/TC PVC-I .625 .220 95 17.0 40 80 3000 Twisted Cond.
.0285
2 Cond. 2.17
.0855 11.99 PVC-I 17.35 Armored
131 7/0.72 BC PE .472 1/TC w/Armor .683 .290 95 17.0 40 80 3000 RG 130
.0285
0.72 BC 7.24 10.29
133 .0285 PE .285 1/BC PVC-I .405 .094 95 16.2 40 80 4000 Use RG 133A
0.64 BC 7.24 10.29 95 Ohm Version
133A .0253 PE .285 1/BC PVC-IIA .405 .094 95 16.2 40 80 4000 RG 8
0.64 SCCS 3.71 5.92 See RG 302 for
140 .0250 PTFE 1.46 1/SC FG Braid-V .233 .056 75 19.5 55 250 2300 FEP Jacket
0.91 SCCS 2.95 4.83
141 .0359 PTFE .116 1/SC FG Braid-V .190 .036 50 29.4 55 250 1900 Use RG 141A
0.99 SCCS 2.95 4.83 See RG 303 for
141A .0390 PTFE .116 1/SC FG Braid-V .190 .036 50 29.4 55 250 1900 FEP Jacket
0.91 SCCS 2.95 4.95
142 .0359 PTFE .116 2/SC FG Braid-V .195 .047 50 29.4 55 250 1900 Use RG 142A
0.99 SCCS 2.95 4.95 See RG 142B for
142A .0390 PTFE .116 2/SC FG .195 .047 50 29.4 50 250 1900 FEP Jacket
0.99 SCCS 2.95 4.95 Standard Center
142B .0390 PTFE .116 2/SC FEP .195 .047 50 29.4 55 250 1900 Cond. Available
1.45 SCCS 4.7 8.26
143 .0570 PTFE .185 2/SC FG Braid-V .325 .114 50 29.4 55 250 3000 Use RG 143A
1.5 SCCS 4.7 8.26 See RG 304 for
143A .0590 PTFE .185 1/SC FG Braid-V .325 .109 50 29.4 55 250 3000 FEP Jacket
1.36
.0537 Air-space 7.24 10.41 High Temp.
144 7/0.45 SCCS PE .285 Copper Tube FG Braid-V .410 .137 75 19.5 55 250 5000 RG 11A
.0179
2 Cond. 1.83 BC Air-space
145 .0720 PTFE —1/BC Lead/Tar — — 75 14.6 — — —
0.18 CCS 7.24 9.53 Low
146 .0070 PE .285 1/BC FG Braid-V .375 .108 190 6.0 55 200 1000 Capacitance
6.35 BC 23.11 PVC-I 49.2 RG 19U
147 .2500 PE .910 1/BC w/Armor 1.937 —5229.5 40 80 14,000 w/Armor
2.17
.0855 7.24 PVC-I 20.32
148 7/0.72 BC PTFE .285 1/SC w/Armor .800 —5229.5 40 80 4000 —
.0285
1.22
.048 7.24 10.29
149 7/0.4 TC PE .285 1/BC PVC-IIA .405 .105 75 20.6 40 80 5000 Use RG 391
.0159
1.22
.048 7.24 PVC-IIA 11.76
150 7/0.4 TC PE .285 1/BC w/Armor .463 .112 75 20.6 40 80 5000 Use RG 392
.0159
2.17
.0855 PE and 7.24 13.72 Triaxial Pulse
156 7/0.72 TC Cond. PE .285 3/TC, GS, TC PVC-IIA .540 .211 50 32.0 40 80 10,000 Cable
.0285
2.55
.1005 PE and 11.56 18.42 Triaxial Pulse
157 19/0.51 TC Cond. PE .455 3/TC, GS, TC PVC-IIA .725 .317 50 38.0 40 80 15,000 Cable
.0201
5.05
.1988 PE and 11.56 18.42 Triaxial Pulse
158 37/0.72 TC Cond. PE .455 3/TC, GS, TC PVC-IIA .725 .380 25 78.0 40 80 15,000 Cable
.0284
0.81 SC Taped 2.95 4.95
159 .0320 PTFE .116 1/SC FG Braid-V .195 .035 50 29.4 55 250 1900 Use RG 141
4 Cond. 1.8
.071 8.18 26.8 4 Cond.
160 19/0.36 2TC, 2BC PE .322 1/BC PVC-I 1.055 —125 12.0 40 80 3000 Balanced Line
.0142
0.3
.012 1.45 2.08
161 7/0.1 S Cad. BR PTFE .057 1/SC Nylon .082 .015 70 20.0 60 120 1000 Miniature
.004
2.65 BC 17.27 22.1 RG 35B without
164 .1045 PE .680 1/BC PVC-IIA .870 .490 75 20.6 40 80 10,000 Armor
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
2.44
.0960 7.24 FG 10.41 RG 225 w/One
165 7/0.81 SC PTFE .285 1/SC Braid-V .410 .121 50 29.4 55 250 5000 Braid
.0320
2.44
.0960 7.24 FG Braid-V 11.68 RG 165
166 7/0.81 SC PTFE .285 1/SC w/Armor .460 .144 50 29.4 55 250 5000 w/ Armor
.0320
0.48
.0189 1.52 2.54 Miniature Data
174 7/0.16 CCS PE .060 1/TC PVC .100 .008 50 30.8 40 80 1500 Transmission
.0063
0.48
.0189 1.52 2.54 Miniature Data
174A 7/0.16 CCS PE .060 1/TC PVC-IIA .100 .008 50 30.8 40 80 1500 Transmission
.0063
3.43 7.24 10.29
176 .135 Helix over PE 1/Magnet Wire PVC-I .120 2240 49.0 40 80 5000 —
Magnetic Core .285 .405
177 4.95 BC PE 17.27 2/SC PVC-IIA 22.73 .470 50 30.8 40 80 11,000 High Frequency
.195 .680 .895 RG 218
0.3
.0120 0.91 1.83
178 7/0.1 SCCS PTFE .036 1/SC KEL-F .072 .0054 50 29.4 40 150 1000 Use RG 178B
.0040
0.3
.0120 0.86 1.83
178A 7/0.1 SCCS PTFE .034 1/SC KEL-F .072 .005 50 29.4 40 150 1000 Use RG 178B
.0040
0.3
.0120 0.86 1.83 High Strength
178B 7/0.1 SCCS PTFE .034 1/SC FEP-IX .072 .0054 50 29.4 55 200 1000 Cond. Available
.0040
0.3
.0120 1.45 2.54
179 7/0.1 SCCS PTFE .057 1/SC KEL-F .100 .010 70 20.4 55 150 1200 Use RG 179B
.0040
0.3
.0120 1.6 2.54
179A 7/0.1 SCCS PTFE .063 1/SC KEL-F .100 .010 75 19.5 40 150 1200 Use RG 179B
.0040
0.3
.0120 1.6 2.54 High Strength
179B 7/0.1 SCCS PTFE .063 1/SC FEP-IX .100 .010 75 19.5 55 200 1200 Cond. Available
.0040
0.3
.0120 2.62 3.56
180 7/0.1 SCCS PTFE .103 1/SC KEL-F .140 .019 93 15.4 40 150 1500 Use RG 180B
.0040
0.3
.0120 2.59 3.56
180A 7/0.1 SCCS PTFE .102 1/SC KEL-F .140 .019 95 15.4 40 150 1500 Use RG 180B
.0040
0.3
.0120 2.59 3.56 High Strength
180B 7/0.1 SCCS PTFE .102 1/SC KEP-IX .140 .019 95 15.4 55 200 1500 Cond. Available
.0040
2 Cond. 1.21 2/Individual
.0477 5.33 Inner 16.25 Balanced
181 7/0.4 BC PE .210 Common PVS-IIA .640 .198 125 12.0 40 80 3500 Line
.0159 Outer BC
2 of 19/0.36 BC 2/8.43 Each Core
.0142 4 Cores .332 1/BC PVC-IIA each 26.8 125 12.0 2300 Special 4
182 2 of 19/0.17 TC PE 2/3.71 Overall Shield PVC-I overall 1.055 —each each 40 80 3000 Coaxial
.0066 .146 1/BC
183 6.38 BC PS Helix 16.05 AI. Tube None 19.05 .380 50 23.0 40 80 1800 See Times
.2510 .632 .750 AM-5034S
0.08 [.0031] Air-Space 4.78 7.16 Delay Line
185 Mag. Wire Helix 1/Magnet Wire PVC-IIA — 2000 — 40 80 —
on PE Core PE .188 .282 Cable
291
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
292
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
0.3
.0120 1.52 2.67
187 7/0.1 SCCS PTFE .060 1/SC PTFE .105 .010 75 19.5 55 250 1200 Use RG 179B
.0040
0.3
.0120 1.52 2.67
187A 7/0.1 SCCS PTFE .060 1/SC PTFE .105 .010 75 19.5 55 250 1200 Use RG 179B
.0040
0.51
.0201 1.52 2.67
188 7/0.17 SCCS PTFE .060 1/SC PTFE .105 .011 50 29.4 55 250 1200 Use RG 316
.0067
0.51
.0201 1.52 2.67
188A 7/0.17 SCCS PTFE .060 1/SC PTFE .105 .011 50 29.4 55 250 1200 Use RG 316
.0067
189 6.38 BC PS Helix 16.05 2/SC PE-IIIA 22.23 .570 50 23.0 55 80 3500 Use RG 389
.2510 .632 .875
1.49
.0585 9.65 3/TC, 17.78
190 7/0.3 TC Rubber H, J .380 GS, TC Neoprene VIII .700 .353 50 50.0 55 80 15,000 —
.0117
191 12.32 TC Braid Rubber H, J, H 27.05 3/TC, Neoprene VIII 37.08 1.469 25 85.0 55 80 15,000 —
.485 1.065 GS, GS 1.460
192 26.8 GS Tube Butyl Rubber — 3/TC, Rubber 55.88 —12.5 175.0 55 80 15,000 —
1.055 TC Braid GS, GS 2.200 Peak
193 26.8 GS Tube Silicone —3/TC, Rubber 53.34 —12.5 159.0 55 80 30,000 —
1.055 TC Braid Rubber GS, GS 2.100 Peak
194 26.8 GS Tube Silicone —3/TC, Rubber w/ 49.4 —12.5 159.0 55 80 30,000 —
1.055 TC Braid Rubber GS, GS Al. Armor 1.945 Peak
0.3
.0120 2.59 1/SC 3.68
195 7/0.1 SCCS PTFE .102 PTFE .145 .020 95 15.4 55 250 1500 Use RG 180B
.004
0.3
.0120 2.59 1/SC 3.68
195A 7/0.1 SCCS PTFE .102 PTFE .145 .020 95 15.4 55 250 1500 Use RG 180B
.004
0.3
.0120 0.86 1/SC 1.83
196 7/0.1 SCCS PTFE .034 PTFE .072 .006 50 29.4 55 250 1000 Use RG 178B
.004
0.3
.0120 0.86 1/SC 1.83
196A 7/0.1 SCCS PTFE .034 PTFE .072 .006 50 29.4 55 250 1000 Use RG 178B
.004
197 7.62 BC PS Helix 19.25 22.23 [.875] None 22.23 .500 50 22.0 55 80 2400 —
.300 .758 OD Al. Tube .875 Peak
198 2.9 BC PS Helix 10.69 12.7 [.500] PE 15.24 .155 70 16.0 55 80 1300 —
.1140 .421 OD Al. Tube .600 Peak
199 5.31 BC PS Helix 19.25 22.23 [.875] PE 25.78 .435 70 16.0 55 80 2400 —
.209 .758 OD Al. Tube 1.015 Peak
OD-10.29
.405 37.39 41.28 [1.625] 44.83 4600
200 ID-7.65 BC Tube PS Helix 1.472 OD Al. Tube PE 1.765 .900 70 16.0 55 80 Peak —
.301
4.8
.189 Air-Space 12.7 2/SC SR and 18.42 Low Loss
209 19/0.96 SC PTFE .500 Polyester-IV .725 .432 50 25.0 55 150 3200 RG 211A
.0378
210 0.64 SCCS Air-Space 3.71 1/SC FG Braid-V 6.15 .040 93 13.5 55 250 750 High Temp.
.0253 PTFE .146 .242 Low Capacitance
211 4.83 BC PTFE 15.75 1/BC FG Braid-V 18.54 .641 50 29.4 55 250 7000 High Temp.
.1900 .620 .730 High Power
211A 4.83 BC PTFE 15.75 1/BC FG Braid-V 18.54 .641 50 29.4 55 250 7000 High Temp.
.1900 .620 .730 High Power
212 1.44 SC PE 4.7 2/SC PVC-IIA 8.43 .083 50 29.4 40 80 3000 Use up to
.0556 .185 .332 10,000 MHz
2.26
.0888 7.24 1/BC PVC-IIA 10.29 Use up to
213 7/0.75 BC PE .285 .405 .099 50 30.8 40 80 5000 1000 MHz
.0296
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
2.26
.0888 7.24 10.0 Use up to
214 7/0.75 SC PE .285 2/SC PVC-IIA .425 .126 50 30.8 40 80 5000 10,000 MHz
.0296
2.26
.0888 7.24 PVC-IIA 11.76 Armored
215 7/0.75 PE .285 1/BC w/Armor .463 .121 50 30.8 40 80 5000 RG 213
.0296
1.21
.0477 7.24 10.8 Use up to
216 7/0.75 BC PE .285 2/BC PVC-IIA .425 .114 75 20.6 40 80 5000 1000 MHz
.0159
217 2.7 BC 9.4 2/BC PVC-IIA 13.84 .201 50 30.8 40 80 7000 Use up to
.106 PE .370 .545 1000 MHz
218 4.95 BC 17.27 1/BC PVC-IIA 22.1 .460 50 30.8 40 80 11,000 Use up to
.195 PE .680 .870 1000 MHz
219 4.95 BC 17.27 1/BC PVC-IIA 23.57 .585 50 30.8 40 80 11,000 Armored
.195 PE .680 w/Armor .928 RG 218
220 6.6 BC 23.11 1/BC PVC-IIA 28.45 .740 50 30.8 40 80 14,000 Use up to
.260 PE .910 1.120 1000 MHz
221 6.6 BC 23.11 1/BC PVC-IIA 29.92 .925 50 30.8 40 80 14,000 Armored
.260 PE .910 w/Armor 1.178 RG 220
1.41 4.7 8.43 High
222 .0556 PE 2/SC PVC-IIA .087 50 30.8 40 80 3000
High Res. Wire .185 .332 Attenuation
223 0.89 SC 2.95 2/SC PVC-IIA 5.36 .034 50 30.8 40 80 1900 Use up to
.035 PE .116 .211 10,000 MHz
224 2.609 BC 9.4 2/BC PVC-IIA 15.32 .310 50 30.8 40 80 7000 Armored
.106 PE .370 w/Armor .603 RG 217
2.38
.0936 7.24 10.92 See RG 393 for
225 7/0.79 SC PTFE .285 2/SC FG Braid-V .430 .180 50 29.4 55 250 5000 FEP Jacket
.0312
3.23
.1270 Taped 9.4 12.7
226 19/0.65 SC PTFE .370 2/SC FG Braid-V .500 .445 50 29.4 55 250 7000 —
.0254
2.38
.0936 7.24 FG Braid-V 12.40 Armored
227 7/0.79 SC PTFE .285 2/SC w/Armor .488 .198 50 29.4 55 250 5000 RG 225
.0312
228 4.83 BC 15.75 1/BC FG Braid-V 20.02 .682 50 29.4 55 250 7000 Armored
.1900 PTFE .620 w/Armor .788 RG 211
228A 4.83 BC 15.75 1/BC FG Braid-V 20.02 .682 50 29.4 55 250 7000 Armored
.1900 PTFE .620 w/Armor .788 RG 211A
2.44
.0960 7.24 FG Braid-V 11.68
229 7/0.81 SC PTFE .285 1/SC w/Armor .460 .144 50 29.4 55 250 5000 Use RG 166
.032
5.05
.1988 11.56 3/TC, 18.8
230 37/0.72 TC Rubber-D .455 GS, GS Rubber-IV .740 —25100.0 40 80 15,000 —
.0284
OD-4.11 12.7
.162 11.43 .500 12.7 5000 RG 331 for
231 ID-2.84 BC Foam PE .450 OD Al. Tube
None .500 .118 50 25.0 55 80 Peak Jacketed Cable
.112
7.62 BC 19.25 22.23 28.07 2400
232 PE Helix .875 PE-IIIA .570 50 22.0 50 80 —
.300 .758 OD Al. Tube 1.015 Peak
OD-15.01 BC 41.28
.591 37.39 1.625 44.83 4700
233 ID-12.22 PS Helix 1.472 OD Al. Tube
PE-IIIA 1.765 1.050 50 22.0 55 80 Peak —
.481
OD-29.39 BC 79.38
1.570 70.49 3.125 83.69 8700
234 ID-25.78 PS Helix 2.775 OD Al. Tube
PE-IIIA 3.295 3.110 50 22.0 55 80 Peak —
1.015
2.16
.0852 Taped 5.72 11.43 RG 115A 235
235 7/0.72 PTFE .255 2/SC SIL/DAC VI .450 .160 50 29.5 55 250 5000 w/VI Jacket
.0284
293
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
294
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
236 4.11 BC 10.69 12.7 [.500] None 12.7 .165 50 24.0 55 80 1300 —
.1620 PS Helix .421 OD Al. Tube .500 Peak
237 4.11 BC 10.69 12.7 [.500] PE-IIIA 15.24 .195 50 24.0 55 80 1300 —
.1620 PS Helix .421 OD Al. Tube .600 Peak
238 — — — — — — — — — — — Use RG 197/U
239 — — — — — — — — — — — Use RG 232/U
OD-15.01 BC 41.28
.591 36.07 1.625 41.28
240 ID-12.22 BC PS Helix 1.420 OD Al. Tube
None 1.625 .930 50 22.0 55 80 4700 —
.481
241 — — — — — — — — — — — Use RG 233
OD-29.39 79.38
1.157 72.39 3.125 79.3 8700
242 ID-25.78 PS Helix 2.850 OD Al. Tube
None 3.125 2.700 50 22.0 55 80 Peak —
1.0150
243 — — — — — — — — — — — Use RG 234
244 2.59 BC 10.69 12.7 [.500] None 12.7 .118 75 15.5 55 80 1200 —
.102 PS Helix .421 OD Al. Tube .500 Peak
245 2.59 BC 10.69 12.7 [.500] PE-IIIA 15.24 .148 75 15.5 55 80 1200 —
.102 PS Helix .421 OD Al. Tube .600 Peak
246 4.78 BC 19.25 22.23 [.875] None 22.23 .348 75 15.2 55 80 2200 —
.1880 PS Helix .758 OD Al. Tube .875 Peak
247 4.78 BC 19.25 22.23 [.875] PE-IIIA 25.78 .418 75 15.2 55 80 2200 —
.1880 PS Helix .758 OD Al. Tube 1.015 Peak
OD-9.5 BC 41.28
.3740 37.39 1.625 41.28 4300
248 ID-6.96 PS Helix 1.472 OD Al. Tube
None 1.625 .948 75 15.0 55 80 Peak —
27.40
OD-9.5 BC
.3740 37.39 41.28 44.83 4300
249 ID-6.96 PS Helix 1.472 1.625 PE-IIIA 1.765 1.068 75 15.0 55 80 Peak —
27.40
18.59 BC 79.38
.732 72.39 3.125 79.38 8500
250 16.05 PS Helix 2.850 OD Al. Tube
None 3.125 2.395 75 15.0 55 80 Peak —
.632
18.59 BC 79.38
.732 72.39 3.125 32.95 8500
251 16.05 PS Helix 2.850 OD Al. Tube
PE-IIIA 2.805 .175 75 15.0 55 80 Peak —
.632
252 4.24 BC 11.58 13.46 [.530] None 13.46 .225 50 24.0 55 80 1000 —
.1670 PE Tubes .456 OD Al. Tube .530
253 4.24 BC 11.58 13.46 [.530] PE 16.64 .655 50 24.0 55 80 1000 —
.1670 PE Tubes .456 OD Al. Tube .655
254 7.9 BC 21.16 24.21 [.953] PE 27.94 .555 50 24.0 55 80 1860 —
.3110 PE Tubes .833 OD Al. Tube 1.100
255 7.9 BC 21.16 24.21 [.953] None 24.21 .550 50 24.0 55 80 1860 —
.3110 PE Tubes .833 OD Al. Tube .953
OD-7.9 SC 24.21
.3110 21.16 .953 24.21
256 ID-6.48 PTFE Tubes .833 OD Al. Tube
None .953 1.200 50 24.0 55 80 1860 —
.2550
OD-15.39 45.36
.6060 41.2 1.786 45.36
257 ID-1.23 BC PS Tubes 1.622 OD Al. Tube
None 1.786 1.380 50 24.0 55 80 3640 —
.4860
OD-15.39 45.36
.6060 41.2 1.786 48.92
258 ID-1.23 BC Tube PS Tubes 1.622 OD Al. Tube
PE 1.926 .100 50 24.0 55 80 3640 —
.4860
259 2.92 BC Tube 8.08 9.91 [.390] None 9.91 .140 50 24.0 55 80 697 —
.1150 PTFE Tubes .318 OD Al. Tube .390
260 2.92 BC Tube 8.08 9.91 [.390] PE-IIIA 11.43 .170 50 24.0 55 80 697 —
.1150 PE Tubes .318 OD Al. Tube .450
263 4.37 BC Air-Space 10.69 None 12.7 .336 50 21.5 40 250 1300 —
.1720 PTFE .421 Al. Tube .500 Peak
4 Cond. 19/0.36 4.47 2 TC, 2 BC 19.05
264 .0142 PE .176 PVC-IIA .327 36.8 41.0 40 80 2000 Use RG 264C
2 TC, 2 BC e/core BC Overall .750
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
4 Cond. 19/0.36 4.47 2 TC, 2 BC 19.05
264A .0142 PE .176 PUR .327 36.8 41.0 40 80 2000 Use RG 264C
2 TC, 2 BC e/core BC Overall .750
4 Cond. 1.73 4.72 2 TC, 2 BC 19.43 Watertight
264C .068 PE .186 PUR — 40 38.4 40 80 2000
2 BC, 2 TC e/core BC Overall .765 4 Coax.
265 17.2 BC Tube 40.08 Copper Clad PE-IIIA 52.58 .120 50 22.3 40 80 145 KW —
.6770 PE Helix 1.578 Mild Steel Tube 2.070 Peak
0.29 Cond. Over 75 Spiral
266 .0113 PE 7.24 Wound Cond. PVC-I 10.16 —1530 53.0 40 80 5000 DC Delay Line Cable
3.66 Mag. Core .285 68 BC & 7 .400 50 ns/ft
.144 are Insulated
9.02 BC Tube Copper Clad 30.23 44 KW
267 PS Helix — Mild Steel PE-IIIA .234 50 22.2 40 80 —
.3550 Cor. Tubing 1.190 Peak
268 4.09 BC 8.89 Corrugated None 12.65 .430 50 23.0 55 80 10 KW —
.1610 PE Helix .350 BC Tube .498 Peak
ID-7.29
.2870 20.19 Corrugated 23.53 44 KW
269 OD-9.09 BC PE Helix .795 BC Tube None 1.005 .430 50 22.2 55 80 Peak —
.3580 Tube
OD-7.29
.2870 20.19 Corrugated 23.53 44 KW
269A ID-9.09 BC PE Helix .795 BC Tube None 1.005 .875 50 22.2 55 80 Peak —
.3580 Tube
ID-14.94
.5880 40.08 Corrugated 46.48 145 KW
270 OD-17.48 BC PE Helix 1.578 BC Tube None 1.830 .875 50 22.3 55 80 Peak —
.6880 Tube
ID-14.94
.5880 40.08 Corrugated 46.48 145 KW
270A OD-17.48 BC PE Helix 1.578 BC Tube None 1.830 .125 50 22.3 55 80 Peak —
.6880 Tube
0.64 Extra Flex.
.0250 Air-space 2.79 3.68 High Temp. Extra Flex.
279 19/0.13 SCCS PTFE .110 1/SC FG Braid-V .145 .200 75 19.5 55 250
Cable High Temp. Cable
.0050
280 2.91 BC Taped 8.31 2/SC FEP-IX 11.89 .400 50 25.4 55 200 3000 Low Loss
.1144 PTFE .327 .468 High Frequency
4.8
.1890 Taped 12.7 19.05 Low Loss
281 19/0.96 SC PTFE .500 2/SC Sil./DAC-VI .750 .031 50 25.4 55 150 4000 High Power
.0378
282 0.64 SC Irradiated 2.51 2/SC FEP 5.08 .145 54.5 28.2 40 150 4500 —
.0253 PE .099 .200
1.49
.0585 7.31 12.07
283 19/0.3 SC Rubber-D .288 2/SC Sil. .475 .410 46 50.0 55 150 8000 —
.0117
284A 5.59 BC 20.19 Corrugated None 25.53 .430 75 15.0 55 80 29 KW —
.220 PE Helix .795 BC Tube 1.005
285A 2.9 BC PTFE 20.19 Corrugated None 25.53 .720 100 13.0 55 200 22 KW —
.1140 Helix .795 BC Tube 1.005 Peak
OD-10.92
.4300 39.88 Corrugated 46.48 100 KW
286 ID-9.14 BC PE Helix 1.570 BC Tube None 1.830 .750 75 15.1 55 80 Peak —
.3600 Tube
287 5 BC 39.88 Corrugated None 46.48 3.000 100 13.5 55 80 73 KW —
.1970 PE Helix 1.570 BC Tube 1.830 Peak
OD-8.46
.3330 75.18 95.25 CCS 95.25 440 KW
288 ID-5.64 BC PE Helix 2.960 3.750 None 3.750 3.000 50 21.6 40 80 Peak —
.2221 Tube
OD-20.83
.8200 75.18 95.25 CCS 95.25 290 KW
289 ID-18.8 CCS PE Helix 2.960 3.750 None 3.750 1.040 75 14.7 40 80 Peak —
.7400 Tube
292 10.92 BC Tube 39.88 46.48 [1.8300] PE and 50.8 .160 75 15.1 55 80 100 KW —
.4300 PE Helix 1.570 Corr. BC Tube Flooding Comp. 2.000 Peak
293 2.69 BC 9.53 13.84 .160 50 30.8 55 80 7000 Use RG 293A
.106 PE .375 1/SC PE-IIIA .545
295
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
296
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
293A 2.69 BC 9.4 PE-IIIA 13.84 .205 50 30.8 55 80 7000 Watertight
.106 PE .370 1/SC .545 RG 217
2 Cond. 2.05 11.99 16
294 .0808 PE 1/TC PE-IIIA .205 95 16.3 55 80 3000 Use RG 294A
1 BC, 1 TC .472 .630
2 Cond. 2.05 11.99 16 Watertight
294A .0808 PE 1/SC PE-IIIA .420 95 16.3 55 80 3000
1 BC, 1 TC .472 .630 RG 130
295 4.95 BC 17.27 PE-IIIA 22.73 —5030.8 55 80 11,000 Watertight
.1950 PE .680 1/SC .895 RG 218
5.97
.2352 Silicone 23.01 30.23
296 37/0.85 SC Rubber .906 1/SC Neoprene 1.190 —5036.4 55 80 13,800 —
.0336
OD-9.02
.3550 PFTE 20.19 Corrugated 25.53 44 KW
297 ID-7.29 BC Helix .795 BC Tube None 1.005 .090 50 21.4 55 200 Peak —
.2870 Tube
15.32
.6030 2.92 16.51 Buoyant
298 7/0.51 CCS PE .115 None Foam PE .650 .056 — — 55 80 — Per MIL-C-22667
.0201
1.55
.0609 4.7 6.23 FEP Jacketed
301 7/0.52 HR PTFE .185 1/HR FEP-IX .245 .031 50 29.4 55 200 3000 RG 126
.0203
302 0.64 SCCS 3.71 FEP-IX 5.11 .030 75 19.5 55 200 2300 FEP Jacketed
.0250 PTFE .146 1/SC .201 RG 140
303 0.99 SCCS 2.95 FEP-IX 4.32 .088 50 29.4 55 200 1900 FEP Jacketed
.0390 PTFE .116 1/SC .170 RG 141A
304 1.5 SCCS 4.7 FEP-IX 7.11 —5029.4 55 200 300 FEP Jacketed
.0590 PTFE .185 2/SC .280 RG 143A
OD-10.92
.4300 FEP 39.88 46.48 BC Tube 50.55
305 ID-9.14 1.570 1.830 PE-IIIA 1.990 .545 75 14.4 55 80 2720 —
.3600 Tube
306A 4.39 BC 20.35 22.23 AI. Tube PE-IIIA 25.78 .070 75 16.5 55 80 5700 Per MIL-C-23806
.1730 Foam PE .801 .8750 1.015
0.74
.0290 3.71 2/SC 6.86 Triax
307 19/0.15 SC Foam PE .146 PUR Interlayer PE-IIIA .270 .070 75 16.7 55 80 1000 Use to 100 MHz
.0058
0.74
.0290 3.71 2/SC 6.86 Triax
307A 19/0.15 SC Foam PE .146 PUR Interlayer PE-IIIA .270 .060 75 16.7 55 80 1000 Use to 100 MHz
.0058
0.51
.0201 1.52 2.59 FEP Jacketed
316 7/0.17 SCCS PTFE .060 1/SC FEDP-IX .102 .012 50 29.4 55 200 1200 RG 188A
.0067
2 Cond. 2.21
.0870 11.33 18.03 Water
317 7/0.74 BC FEP .446 1/TC Neoprene .710 —9515.4 55 80 10,000 Blocked
.0290
OD-9.09 BC 25.53
.3580 Tube 20.19 1.005 28.58 44 KW
318 ID-7.29 PE Helix .795 Corr. BC Tube PE-IIIA 1.125 .530 50 22.0 55 80 Peak —
.2870
OD-17.48 BC 46.48
.6880 Tube 39.88 1.830 50.8 145 KW
319 ID-14.94 PE Helix 1.570 Corr. BC Tube PE-IIIA 2.000 1.040 50 22.0 55 80 Peak —
.5580
OD-28.96 79.39 72.39 320 KW
321 1.1400 PE Helix — 2.850 None 1.210 50 21.7 55 80 —
Corr. BC Tube Corr. BC Tube 2.850 Peak
OD-28.96 79.39 PE & Flood 77.22 320 KW
322 1.1400 PE Helix — 2.850 1.780 50 21.7 55 80 —
Corr. BC Tube Corr. BC Tube Comp. 3.040 Peak
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
7.92 BC Tube 24.89 PE & Flood 26.92
323 Foam PE — .980 .420 50 25.6 55 80 1480 —
.312 Corr. BC Tube Comp. 1.060
7.92 BC Tube 24.89 24.89
324 Foam PE — .980 None .320 50 25.6 55 80 1480 —
.312 Corr. BC Tube .980
2.54
.1000 6.6 2/SC Strip 8.89
325 19/0.51 SC Al. PE Spline .260 Braids PUR .350 .10 50 26.3 55 80 750 Low Loss
.0200
5.08
.2000 13.97 2/SC Strip 17.7
326 19/1.02 SC Al. PE Spline .550 Braids PUR .697 .24 50 26.3 55 80 1700 Low Loss
.0400
8.13
.3200 21.34 2/SC Strip 25.65
327 19/1.63 SC Al. PE Spline .840 Braids PUR 1.010 .55 50 26.3 55 80 2500 Low Loss
.0640
328 12.32 TC Braid Rubber 27.05 3/TC, Neoprene 37.08 1.469 25 85.0 55 80 20,000 —
.4850 H.J.H. 1.065 GS, TC 1.460
1.49
.0585 Rubber 9.65 3/TC, 17.78
329 19/0.3 TC H.J.H. .380 GS, TC Neoprene .700 .353 50 50.0 55 80 15,000 —
.0117
6.15
330 SC Foam PE — 1/SC — .242 —5025.0 — — —
331 4.11 BC 11.43 12.7 Al. Tube PE-IIIA 15.24 .187 50 25.0 55 80 2500 Jacketed 231
.1620 Foam PE .450 .500 .600 Solid Conductor
332 7.11 BC 20.35 22.23 Al. Tube None 22.23 .466 50 25.0 55 80 4500 Per MIL-C-23806
.2800 Foam PE .801 .8750 .875
333 7.11 BC 20.35 22.23 Al. Tube PE-IIIA 25.78 .548 50 25.0 55 80 4500 Jacketed RG 332
.2800 Foam PE .801 .8750 1.015
334 2.49 BC 11.43 12.7 Al. Tube None 12.7 .109 75 17.0 55 80 2500 Per MIL-C-23806
.0980 Foam PE .450 .500 .500
335 2.49 BC 11.43 12.7 Al. Tube PE-IIIA 15.88 .143 75 17.0 55 80 2500 Jacketed RG 334
.0980 Foam PE .450 .500 .625
336 4.39 BC 20.35 22.23 Al. Tube None 22.23 .315 75 17.0 55 80 4000 Per MIL-C-23806
.1730 Foam PE .801 .8750 .875
360 6.17 BC 17.17 19.05 Al. Tube PE-IIIA 20.95 .397 50 25.0 55 80 4000 Per MIL-C-23806
.2430 Foam PE .676 .7500 .825
4.06 13.72 15.75
366 Foam PE — .540 PE-IIIA — 50 62.6 55 80 4000 —
.1600 Corr. BC Tube .620
Corrugated 12.7 132.08 830 KW
367 PE Helix — .5000 PE-IIIA 4.590 50 21.7 55 80 —
BC Tube Corr. BC Tube 5.2000 Peak
369 2.97 BC 8.08 9.91 Al. Tube PE-IIIA 11.94 .140 50 24.0 55 80 700 —
.1170 PE Tubes .318 .390 .470
370 2.97 BC 8.08 9.91 Al. Tube None 9.91 .100 50 24.0 40 80 700 —
.1170 PE Tubes .318 .390 .390
374 0.72 BC 4.06 Foam PE 16.51 .097 — — 55 80 — Buoyant
.0285 PE .160 None .650 Antennna
376 7.92 BC Tube PE-IIIA 26.92 .390 50 26.0 55 80 6000 —
.3120 Foam PE — Corr. Al. Tube 1.060
377 4.19 SC Tube 13.46 Al. Tube None 13.36 .170 50 24.0 55 250 1000 —
.1650 PTFE Tubes — .5300 .530
18.11 BC Tube 46.48 50.8 145 KW
378 PE Helix — 1.830 PE-IIIA .620 50 22.1 55 80 —
.7130 Corr. Al. Tube 2.000 Peak
2 Cond. 1.02 16.51 Exper. Buoyant
383 .0403 PE — None Foam PE — 100 — 55 80 —
2000 lb. Break .650 Twisted Pair
384 1.29 BC 1/Flat BC Braid Foam PE 16.51 —5030.8 55 80 — Buoyant Antennna
.0508 PE — Waterproofed .650 600 psig.
385 3.89 SC Semi-Solid 10.8 12.7 Corr. Al. Optional 16.76 .178 50 25.0 55 250 1500 Low Loss
.1530 PTFE .425 .500 .660 No Press. Req.
297
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
298
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix D - Typical Coaxial Cable Specifications (Continued)
Max.
RG/U Inner Dielectric Number/Type Jacket Weight Nom. Nom. Max. Operating
Type Conductor Material DOD of Shielding Material O.D. (lb/ft) Imped. Cap Operating Voltage Comments
Cable Braids (Ohms) pf/ft Temp. (C°) (Volts RMS)
386 1.29 CCS None Foam PE 16.51 ———55 80 — Buoyant Antennna
.0508 PE — Non-hosing .650 400 lb. Break
388 11.28 PE-IIIA 13.84 —5030.8 55 80 — Watertight
CS PE — .444 Max. SC .545 See RG 14A
389 6.35 BC Al. 16.13 PE-IIIA 22.23 .336 50 22.8 55 80 2000 Low Loss
.2500 PE Spline .635 2/SC .875 Replaces RG 189
1.22
.048 Cond. PE 7.24 10.29 Low Noise
391 7/0.4 TC and PE .285 1/TC PVC-IIA .405 .092 72 — 55 80 5000 Cable
.0159
1.22
.048 Cond. PE 7.24 PVC-IIA 12.07 Armored
392 7/0.4 TC and PE .285 1/TC w/Armor .475 .114 72 — 55 80 5000 RG 391
.0159
2.38
.0936 7.24 9.91 Moistureproof
393 7/0.79 SC PTFE .285 2/SC FEP-IX .390 .165 50 29.4 55 200 5000 RG 225
.0312
2.44
.096 Air-space 6.86 8.89 Low Loss
397 7/0.81 SC PTFE .270 2/SC FEP-IX .350 .125 50 28.0 55 200 2000 RG 393
.032
0.98
.0385 2.95 4.95
400 19/0.2 SPC PTFE .116 2/SC FEP-IX .195 .050 50 29.3 55 200 1900 —
.0077
1.64 SPC 5.46 6.35 OD 6.35
401 PTFE .250 None .081 50 29.3 40 125 3000 Semirigid
.0645 .215 Copper Tube .250
0.91 SCCS 3.02 3.58 OD 3.58
402 PTFE .141 None .032 50 29.3 40 125 2500 Semirigid
.0360 .119 Copper Tube .141
0.3 SCCS
.012 0.86 2/SC 2.95 Triaxial
403 7/0.1 PTFE .034 FEP Interlayer FEP-IX .116 .0075 50 29.3 55 200 2500 RG 178B
.004
0.3 SCCS
.012 PTFE and 0.86 1.83 31.5 Low Loss
404 7/0.1 Cond. PTFE .034 1/SC FEP-IX .072 .0054 50 Max. 55 200 2000 RG 178B
.004
0.51 SCCS 1.68 2.18 OD 2.19
405 PTFE .086 None .015 50 29.4 40 125 1500 Semirigid
.0201 .066 Copper Tube .0865
Appendix E - Maximum Power Handling Capabilities for Cables
(Average Input Power in Watts)
RG/U Frequency in MHz
Type Cable 10 50 100 200 400 1,000 3,000 5,000 10,000
5, 5A, 5B 2,000 800 550 350 230 125 60 40 22
8, 8A, 10A, 213, 215 3,700 1,300 850 540 350 190 95 65 37
9, 9A, 9B, 214 3,700 1,300 850 540 350 190 95 65 37
11, 11A, 12, 12A, 13, 13A, 216 2,500 1,000 650 400 260 150 70 50 26
217 6,000 2,000 1,200 800 480 260 120 85 50
22, 22B 1,700 650 430 280 190 110 50 38 20
55, 55A, 55B, 223 800 310 205 137 90 53 28 20 10
58, 58B 730 280 180 125 85 50 25 17 —
58A, 58C 650 225 170 110 75 44 22 15 —
59, 59A, 59B 1,300 480 310 200 135 77 40 27 15
62, 62A, 71, 71A, 71B 1,300 480 310 200 135 77 40 27 15
62B 1,150 420 280 180 120 69 35 25 14
115, 115A, 165, 225, 393 25,000 9,500 6,300 4,300 2,800 1,700 880 620 350
108, 108A 340 145 100 70 50 30 15 — —
122 540 205 140 90 60 35 18 12 —
140, 141, 141A, 142, 142B, 302, 303, 400, 402 9,000 3,500 2,400 1,600 1,100 650 350 245 140
143, 143A 11,500 4,600 3,200 2,100 1,450 850 460 330 190
144 25,000 9,500 6,300 4,300 2,800 1,700 880 620 350
161, 179, 179A, 179B, 187, 187A 1,600 780 570 420 310 200 110 76 41
174, 174A 170 72 50 36 25 16 — — —
178, 178A, 178B, 196, 196A 710 340 240 170 123 78 41 28 14
180, 180A, 180B, 195, 195A 2,500 1,100 800 570 400 250 135 93 50
188, 188A, 316 1,250 600 450 330 240 160 80 57 30
210 8,500 3,300 2,300 1,600 1,100 620 310 220 140
Note: Values above 3 GHz vary considerably depending on construction.
Conditions
Ambient: 40°C
Altitude: Sea level
Center Conductor Temperature:
80°C for polyethylene
200°C for PTFE
299
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
300
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix F - Nominal Loss Characteristics for Cables
(Decibels per Hundred Feet)
RG/U Frequency in MHz
Type Cable 10 50 100 200 400 1,000 3,000 5,000 10,000
5, 5A, 5B .80 1.40 2.90 4.30 6.40 11.00 22.00 30.00 52.00
8, 8A, 10A, 213, 215 .66 1.50 2.20 3.20 4.60 9.00 19.00 28.00 47.00
9, 9A, 9B, 214 .66 1.50 2.20 3.20 4.60 9.00 19.00 28.00 47.00
11, 11A, 12, 12A, 13, 13A, 216 .66 1.50 2.20 3.20 4.60 9.00 19.00 28.00 —
217 .41 1.00 1.40 2.10 3.10 5.80 13.00 19.00 31.00
22, 22B 1.20 2.80 4.20 6.30 9.50 — — — —
55, 55A, 55B, 223 1.35 3.00 4.30 6.00 8.80 16.50 36.00 51.00 85.00
58, 58B 1.20 3.10 4.60 7.00 10.00 17.50 38.00 — —
58A, 58C 1.40 3.30 4.90 7.30 11.00 20.00 41.00 — —
59, 59A, 59B 1.10 2.30 3.30 4.70 6.70 11.50 25.50 41.00 —
62, 62A, 71, 71A, 71B .90 1.90 2.80 3.70 5.20 8.50 18.40 29.50 —
62B .90 2.10 3.00 4.30 6.10 10.50 23.50 36.00 —
115, 115A, 165, 225, 393 .60 1.40 2.10 3.10 4.50 7.50 14.00 21.00 35.00
108, 108A 2.30 5.20 7.50 11.00 16.00 26.20 54.00 — —
122 1.60 4.40 6.90 11.00 16.60 29.20 57.20 89.00 —
140, 141, 141A, 142, 142B, 302, 303, 400, 402 1.20 2.70 3.90 5.50 8.00 13.00 26.00 36.00 62.00
143, 143A .85 1.80 2.50 3.80 5.70 9.70 18.10 26.10 40.70
144 .38 1.00 1.60 2.30 3.80 7.00 15.10 — —
161, 179, 179A, 179B, 187, 187A 5.00 7.90 9.80 12.70 15.80 25.00 43.00 62.50 135.00
174, 174A 3.80 6.50 8.90 12.00 17.50 31.00 64.30 97.00 185.00
178, 178A, 178B, 196, 196A 5.30 10.00 13.30 20.00 27.50 45.00 78.00 115.00 172.00
180, 180A, 180B, 195, 195A 3.10 4.20 5.10 7.30 10.40 16.50 36.00 49.50 89.00
188, 188A, 316 3.80 7.90 11.50 15.00 20.00 30.00 58.00 79.00 133.00
210 .23 .58 .85 1.30 1.90 3.10 6.50 9.00 15.00
Note: Values above 3 GHz vary considerably depending on construction.
Conditions
Ambient: 20°C
Appendix G - Glossary of Terms
A
ambient The atmospheric conditions surrounding a given item. Normally in
terms of factors which influence or modify, such as temperature, humidity, etc.
amplitude The magnitude of variation in a changing quantity from its zero
value. The word requires modification - as with adjectives such as peak,
maximum, rms, etc. - to designate the specific amplitude in question.
arc voltage voltage that continues to pass through a surge protector dur-
ing activation of GDT(approx. 20 volts )
attenuation A reduction in power. It occurs naturally during wave travel
through lines, waveguides, space or a medium such as water. It may be pro-
duced intentionally by placing an attenuator in a circuit. The amount of
attenuation is generally expressed in decibels per unit of length.
B
back mounted A connector attached to the inside of a panel or box with
its mounting flanges inside the equipment.
bayonet coupling A quick coupling device for plug and receptacle con-
nectors. Pins projecting from the outside of the cylindrical receptacle
engage with corresponding cam slots in the bayonet plug.
bellmouth Flared at the mouth. The rear of a properly crimped wire barrel
will have a slight flare (bellmouth) to relieve the strain on the wire strands
as they leave the area of high compression and take their natural “lay”. A
bellmouth condition may also be present in front of the wire barrel.
black box A term used to refer to any assembly or subassembly, usually
electronic, that can readily be installed or removed from a larger system.
BNC Connector A radio frequency connector covered by Military
Specification. It has an impedance of 50 or 75 ohms, and is designed to
operate in the 0 to 4 GHz frequency range. It features quick connect/discon-
nect by pin and cam bayonet coupling.
body Main or largest portion of a connector to which other portions are
attached.
braid A weave of metal fibers used as a shield covering for an insulated
conductor or group of insulated conductors. When flattened it may be used
as a grounding strap.
broad-band E Interference generated over a wide range of frequencies
(e.g., automotive ignition noise).
bulkhead A term used to define a mounting style of connectors. Bulkhead
connectors are designed to be inserted into a panel cutout from the rear
(component side) of the panel.
C
cable Either a standard conductor, with or without insulation and other
coverings, or a combination of conductors insulated from each other.
cable assembly A completed cable and its associated hardware.
capacitance The property of an electrical conductor (dielectric in a
capacitor) that permits the storage of energy as a result of electrical dis-
placement. The basic unit of capacitance is the farad, however, measure-
ment is more commonly in microfarads or picofarads.
cavity A metallic enclosure in some types of tubes and circuits within
which resonant fields may be excited at the microwave frequency to which
the cavity is tuned. Usually referred to as resonant cavity. See also: contact
cavity.
characteristic impedance The ratio of voltage to current at any point
along a transmission line on which there are no standing waves.
circular mil area (CMA) A unit of area equal to the area of a circle
whose diameter is 1 mil (0.001 inch). Used chiefly in specifying cross-
sectional areas of conductors. (See Tyco Electronics Brochure No. 4402-8,
Computing Circular Mil Area for Tyco Electronics Terminals and Splices).
closed entry contact A female contact designed to prevent the entry of a
pin or probing device having a cross-sectional dimension (diameter) greater
than the mating pin.
coaxial cable A transmission line consisting of two conductors concen-
tric with and insulated from each other. In its flexible form it consists of
either a solid or stranded center conductor surrounded by a dielectric. A
braid is then woven over the dielectric to form an outer conductor. A weath-
erproof plastic covering, usually vinyl, is placed on top of the braid.
connector A coupling device employed to connect conductors to one cir-
cuit with those of another circuit. Used to provide rapid connect/disconnect
mating with pc boards, posts or another connector.
connector assembly Includes housing and contact plus additional com-
ponents such as hardware used to hold the assembly together and/or make
the assembly a functional connector.
contact An electrically conductive component designed for use in a multi-
circuit connector.
contact cavity A defined hole in the connector insert or housing into
which the contact must fit. See also: cavity.
contact durability The number of insertion and withdrawal cycles that a
connector must be capable of withstanding while remaining within the per-
formance levels of the applicable specification.
contact engaging and separating force Force required to either
engage or separate contacts. Values are generally established for maximum
and minimum forces.
contact inspection hole A hole, perpendicular to the cylindrical rear
portion of screw machined contacts, used to check the depth to which wire
has been inserted into the barrel.
contact resistance Measurement of electrical resistance of mated con-
tacts when assembled in a connector under typical service use. Electrical
resistance is determined by measuring from the rear of the electrical area of
one contact to the rear of the contact area of the mating contact (excluding
both crimps) while carrying a specified test current.
contact shoulder The flanged or enlarged portion of a contact that pre-
vents it from being over-inserted into the appropriate contact cavity. The
shoulder may also contribute to proper orientation and stability with the
connector housing.
contact, two-piece A contact made of two separate parts joined by
swedging, brazing or other means of fastening to form a single contact.
While this provides the mechanical advantages of two metals, it also has the
inherent electrical disadvantage of difference in conductivity.
corona A discharge of electricity appearing as a bluish-purple glow on the
surface of, and adjacent to, a conductor when the voltage gradient exceeds a
certain critical value. It is caused by the ionization of surrounding air by
high voltage.
crimp The final configuration of a terminal barrel after the necessary com-
pression forces have been applied to cause a functional union between the
terminal barrel and the wire.
crimp height A top to bottom measurement of the crimped barrel, using a
crimp height comparator in the prescribed manner. (Refer to
Tyco Electronics Instruction Sheet 7424).
crimping dies A term used to identify the shaping tools that, when
moved toward each other, produce a certain desirable shape to the barrel of
the terminal or contact that has been placed between them. Crimping dies
are often referred to as die sets or as die inserts.
301
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
302
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix G - Glossary of Terms (Continued)
crimping head Tooling containing jaws and linkage for use in pneumatic
or hydraulic powered units to crimp loose-piece contacts/terminals that may
be too large for hand tool applications.
crimping tool A term commonly used to identify a hand held mechanical
device that is used to crimp a contact, terminal or splice.
crosstalk A magnetic or electrostatic coupling which causes the unwanted
transfer of energy from one circuit (disturbing circuit) to another circuit
(disturbed circuit)
current rating The maximum continuous electrical flow of current recom-
mended for a given situation. It is expressed in amperes.
cycle One complete sequence of values of an alternating quantity, includ-
ing a rise to maximum in one direction and return to zero; a rise to maxi-
mum in the opposite direction and return to zero. The number of cycles
occurring in one second is called the frequency.
D
daisy chain A cable assembly with common wires jumpering three or
more connections/connectors. The term is also used as a verb, implying to
connect in jumper manner.
dB Abbreviation—see decibel.
D.C. sparkover voltage defined as the maximum voltage across a
device before it discharges the energy to ground when subjected to a slowly
rising voltage ramp. A rate of rise of 100V/s is usually chosen for testing
purposes.
decibel A unit expressing the ratio of two voltages, currents or powers.
It is equal to 20 times the common logarithm of the ratio of two voltages
across or two currents through equal loads, or 10 times the common loga-
rithm of the two powers. One decibel is approximately the smallest change
in audible power that can be recognized by the human ear.
die closure Term used to designate a crimping area (crimping chamber)
when the dies are fully closed or bottomed. Die closure is checked with
go/no go plug gage to insure that the crimp produced by the tooling satis-
fies the crimp height specification.
dielectric A material that serves as an insulator. The amount of resistance
to voltage in a given insulation.
dielectric withstanding voltage The maximum potential gradient that a
dielectric material can withstand without failure.
discontinuity Rated interconnection: a broken connection (open circuit)
or the loss of a specified connection characteristic. Transient phenomena:
Short term (temporary) interruption or unacceptable variation in current or
voltage.
dissipation Unusable or lost energy, such as the production of unused
heat in a circuit.
distortion An unwanted change or addition to a signal or waveform when
it is amplified. This definition excludes noise which is an extraneous signal
superimposed on the desired signal.
dummy load A dissipative device used at the end of a transmission line
or waveguide to convert transmitted energy into heat, so essentially no
energy is radiated outward or reflected back to its source.
dust cap A device attached to a connector to provide protection against
dust and foreign debris.
E
electromagnetic compatibility (EMC) The ability of an electronic
device to operate in its intended environment without its performance being
affected by EMI and without generating EMI that will affect other equipment.
electromagnetic interference (EMI) Unwanted electrical or electro-
magnetic energy that causes undesirable responses, degrading performance
or complete malfunctions in electronic equipment. See also: noise.
electromotive force (emf) See voltage.
environmentally sealed A unit is provided with gaskets, seals, grom-
mets, potting or other means to keep out moisture, dust, air or dirt which
might reduce or impair its performance.
F
feedthrough A connector or terminal block, usually having double-ended
terminals, which permits distribution and bussing of electrical circuits. Also
used to describe a bushing in a wall or bulkhead, separating compartments
at different pressure levels, with terminations on both sides.
ferrule A short tube used to make solderless connections to shielded or
coaxial cable. Also molded into the plastic inserts of multiple contact con-
nectors to provide strong, wear-resistant shoulders on which contact retain-
ing springs can bear.
flange A projection extending from or around the periphery of a connector
and having holes that provide for mounting the connector to a panel or to a
mating connector.
frequency modulation (fm) A scheme for modulating a carrier fre-
quency in which the amplitude remains constant but the carrier frequency is
displaced in frequency proportionally to the amplitude of the modulating
signal. An fm broadcast is practically immune to atmospheric and man-
made interference.
fretting corrosion A form of excellerated oxidation that appears at the
interface of contacting materials undergoing slight cyclic relative motion. All
non-nobel metals (tin) are susceptible to some degree of fretting corrosion
and will suffer contact resistance increases.
front mounted A connector is said to be front mounted when it is
attached to the outside of the mating side of a panel. A front mounted con-
nector can only be installed or removed from the outside of the equipment.
G
gas discharge tube (GDT) hermetically sealed device containing an
inert gas.
GHz See gigahertz.
giga A prefix meaning one billion (109).
gigahertz (GHz) One billion cycles per second (109cps).
glow mode condition in which the GDT continues to conduct after an
impulse passed. Characterized by a visible glow in the device caused by
over-heating.
ground A connection, intentional or accidental, between an electrical
circuit and the earth or some conducting body (e.g. chassis) serving in
place of earth.
H
heat-shrinkable A type of plastic material that has been cross-linked. A
term describing tubes, sleeves, caps, boots, films or other forms of plastic
which shrink to encapsulate, protect or insulate connections, splices, termi-
nations and other configurations.
hermetic Airtight, impervious to external influence, as in a hermetic pack-
age. Often used to describe metal-to-metal solder or weld-sealed packages.
Appendix G - Glossary of Terms (Continued)
hermetic seal Hermetically sealed connectors are usually multiple contact
connectors where the contacts are bonded to the connector by glass or other
materials and permits maximum leakage rate of gas through the connector of
1.0 micron ft./hr. at one atmosphere pressure for special applications.
hertz (Hz) International standard term for cycles per second. Named after
the German physicist Heinrich R. Hertz (e.g., 60 cycles per second is equal
to 60 hertz or 60 Hz).
I
impedance (Z) The total opposition offered by a component or circuit to
the flow of alternating or varying current. Impedance is expressed in ohms
and is similar to the actual resistance in a direct current circuit. In computa-
tions, impedance is handled as a complex ratio of voltage to current.
impedance match A condition in which the impedance of a component
or circuit is equal to the internal impedance of the source, or the surge
impedance of a transmission line. This gives maximum transfer of energy
from the source to the load, as well as minimum reflection and distortion.
impulse discharge current
is defined as the peak current of an
impulse which the device can with-
stand ten times (5 of each polarity at
fixed time intervals) without sub-
stantially affecting device perform-
ance. The test normally used to
determine this capacity uses the
8/20ms waveform as depicted below
where T1=8ms and T2=20ms.
impulse sparkover voltage
defined as the maximum level
of voltage across a device before it
discharges the energy to ground
when subjected to a voltage impulse.
The three common waveform profiles
used to determine this capacity are:
inductance One cause of reactance. An electromagnetic phenomenon in
which the expanding and collapsing of a magnetic field surrounding a con-
ductor or device tends to impede changes in current. The effects of induc-
tance become greater as frequencies increase. The basic unit for inductance
is the henry.
input impedance The impedance that exists between the input terminals
of an amplifier or transmission line when the source is disconnected. The
circuit, signal level and frequency must be specified.
insertion loss The loss in load power due to the insertion of a compo-
nent, connector or device at some point in a transmission system. Generally
expressed in decibels as the ratio of the power received at the load before
insertion of the apparatus, to the power received at the load after insertion.
insulation crimp The area of a terminal splice or contact that has been
formed around the insulation of a wire.
insulation grip The ability of certain crimped terminals to hold firmly in
place both the conductor and a small portion of insulation. This prevents
the conductor from being exposed due to insulation receding away from
the terminal.
insulation resistance The electrical resistance between two conductors
separated by an insulating material.
interface The two surfaces of a multiple-contact connector that face each
other when the connector is assembled.
interference An electrical or electromagnetic disturbance that causes
undesirable response in electronic equipment.
J
jack A connecting device into which a plug can be inserted to make circuit
connections. The jack may also have contacts which open or close to per-
form switching functions when the plug is inserted or removed. See also:
receptacle.
L
line impedance Impedance as measured across the terminals of a trans-
mission line; frequently the characteristic impedance of the line.
M
matched impedance The coupling of two circuits in such a way that the
impedance of one circuit equals the impedance of the other.
mate Two join two connectors in a normal engaging mode.
maximum discharge current defined as the peak current of an impulse
which the device can withstand once without substantially affecting device
performance.
mega (M) A prefix meaning one million (106).
microwave That portion of the electromagnetic spectrum lying between
the far infrared and conventional radio frequency range. The microwave fre-
quency range extends from 1 GHz to 300 GHz. Microwaves are usually used
in point-to-point communications because they are easily concentrated into
a beam.
Military Specification Military requirements. The demand imposed
upon a system to meet a military operational need.
mismatch The condition in which the impedance of a source does not
match or equal the impedance of the connected load. This reduces power
transfer by causing reflection.
N
narrow-band EMI generated from a device operating at a specific and
limited range of frequencies. See also: electromagnetic interference (EMI).
N Connector A large radio frequency connector covered by Military
Specification. It has an impedance of 50 ohms and is designed to operate in
the 0 to 11 GHz frequency range. It has a threaded coupling and is physi-
cally larger than a TNC connector.
noise An extraneous signal in an electrical circuit, capable of interfering
with the desired signal. Classes of noise include burst of popcorn noise,
intermediate frequency noise at low audio frequencies, white (thermal)
noise, etc. Signals from power supply or ground line coupled into an ampli-
fier output may be considered noise.
O
“O” crimp An insulation support crimp for open barrel terminals and
contacts. In its crimped form it resembles an “O” and conforms to the shape
of the round wire insulation. “O” crimp is also used to describe the circum-
ferential crimps used on COAXICON ferrules.
0
1
T
2
T
1 = 1.25T t
T
T
1
A
B
0
I
1-0
0-1
0-5
0-9
T
2
T
2 =1.67T t
T
L
0
1
T
A
T
8
0
0.3
0.5
0.9
1.0
V
303
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
304
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Appendix G - Glossary of Terms (Continued)
ohm The unit of measurement for electrical resistance. A circuit is said to
have a resistance of one ohm when an applied emf of one volt causes a cur-
rent of one ampere to flow.
P
panel mount A method of fixing a connector to a board, panel or frame.
The mounted connector is usually the receptacle or female connector. The
plug or male connector is usually the removable portion.
pcb Abbreviation: see printed circuit board.
permeability (chemical) The passage or diffusion (or rate of passage)
of a gas, vapor, liquid or solid through a barrier without physically or chem-
ically affecting it.
permeability (magnetic) The measure of how much better a material is
than air as a path for magnetic lines of force. Air is assumed to have a per-
meability of 1.
plug In coaxial RF connectors the plug is usually the movable portion, and
is usually attached to a cable or removable assembly. Plugs mate with
receptacles, jacks, outlets, etc.
printed circuit board An insulating board serving as a base for a printed
circuit. When the printing process is completed, the board may include
printed components, as well as printed wiring.
propagation delay Time required for an electronic digital device, or
transmission network to transfer information from its input to its output.
propagation delay time The time between the application of a digital
input waveform and the corresponding change in input waveform. It is
measured between reference points on the waveforms. The time is generally
different for positive-going and negative-going waveforms.
prototype A model suitable for use in the complete evaluation of form,
design and performance.
pulse A change in the level, over a relatively short period of time, of a sig-
nal whose value is normally constant.
pulse width The length of time that the pulse voltage is at the transient
level. Electronic pulse widths are usually in the millisecond (10-3),
microsecond (10-6) or nanosecond (10-9) range.
R
receptacle In coaxial RF connectors, the receptacle is usually the fixed
or stationary portion that is mounted to the panel. In shell-type, multiple-
contact connectors the receptacle usually contains the pin contacts and
is mounted on the “cold” side of a circuit such as in a drawer or black
box. Receptacles mate with plugs. See also: jack.
residual impulse defined as the voltage that will pass through the device
prior to activation of the GDT.
residual voltage defined as the small amount of voltage left on the line
after an impulse passes.
resonance A frequency at which captive reactance and inductive reactance
are equal and therefore cancel one another’s effects.
RF Abbreviation for radio frequency.
RG/U Symbol used to designate coaxial cables that are made to
Government Specification (e.g., RG 58U; in this designation the “R” means
radio frequency, the “G” means Government, the “58” is the number
assigned to the government approval, and the “U” means it is a universal
specification).
rise time The time required for a component or logic circuit to change
from the quiescent to the transient state when an input is applied. (i.e.
elapsed time between application of input and attainment of full output level).
rms Abbreviation for root mean square.
root mean square The effective value of an alternating current, corre-
sponding to the direct current value that will produce the same heating effect.
S
screw machine contact A contact which is machined from solid bar
stock.
semi-rigid A cable containing a flexible inner core and a relatively inflexi-
ble sheathing.
sheath The outer covering of a jacket over the insulated conductors to
provide mechanical protection for the conductors. Also known as the exter-
nal conduction surface of a shielded transmission line.
shield/shielding (cable) A conducting envelope, composed of metal
strands, which enclose a wire, group of wires or cable so constructed that
substantially every point on the surface of the underlying insulation is at
ground potential or at some predetermined potential with respect to ground.
shield/shielding (circuit) The metal sleeving surrounding one or more
of the conductors in a wire circuit to prevent interference, interaction or cur-
rent leakage. Shielding protects a circuit against crosstalk.
shock (mechanical) (1) An abrupt impact applied to a stationary object.
(2) An abrupt or nonperiodic change in position, characterized by sudden-
ness, and by the development of substantial internal forces.
SHV Abbreviation for standard high voltage.
sine wave A wave which can be expressed as the sine of a linear function
of time, space or both. A waveform, often viewed on an oscilloscope, of a
pure alternating current or voltage.
skin effect The tendency of alternating currents to flow near the surface of
the conductor, thus being restricted to a small part of the total cross-sec-
tional area. This effect increases the resistance and becomes more marked
as the frequency rises.
sleeve The insulated or metallic covering over the barrel of a terminal.
solder contact A contact or terminal having a cup, hollow cylinder, eyelet
or hook to accept a wire for a conventional soldered termination.
standard high voltage (SHV) A quick connect/disconnect connector
series employing a bayonet lock coupling and designated to operate safely
up to 5000 volts AC. It is the industry standard connector specified by the
National Bureau of Standards (NBS) for high voltage use by the Atomic
Energy Commission (AEC).
standing-wave Distribution of current and voltage on a transmission line,
resulting from two sets of waves traveling in opposite directions.
standing wave ratio The ratio between maximum and minimum current
or voltage along a line. It is a measure of the mismatch between the load
and the line. It is equal to 1 when the line impedance is perfectly matched to
the load. (In which case the maximum and minimum are the same, as cur-
rent and voltage do not vary along the line). The perfect match would be a 1
to 1 ratio.
super high frequency (shf) The Federal Communications Commission
designation for the band from 3,000 to 30,000 MHz in the radio spectrum.
T
tensile The amount of axial load (longitudinal stress) required to break or
pull the wire from the crimped barrel of the terminal, splice or contact.
Appendix G - Glossary of Terms (Continued)
tensile strength The greatest longitudinal stress that a substance or
union can bear without tearing or pulling apart. In crimped terminations, it
is the greatest longitudinal stress that a terminal can bear without the wire
separating from the terminal.
thermal shock The effect of heat or cold applied at such a rate that
nonuniform thermal expansion or contraction occurs within a given material
or combination materials. The effect can cause inserts and other insulation
materials to pull away from metal parts.
time-delay A circuit that delays the transmission of an impulse for a defi-
nite and desired period of time.
TNC Connector A radio frequency connector covered by Military
Specification. It has an impedance of 50 ohms and is designed to operate in
a 0 to 11 GHz frequency range. Reliability is assured by a threaded coupling
that can be safely wired to prevent accidental disconnect.
U
UG Symbol used to describe coaxial connectors that were made to a
Government specification. This specification is now obsolete.
ultra-high frequency (uhf) A Federal Communications Commission
designation for the band from 300 to 3000 MHz on the radio spectrum. In
television - channels 14 to 83 or 470 to 890 MHz.
V
very high frequency (vhf) A Federal Communications Commission
designation for the band from 30 to 300 MHz on the radio spectrum.
voice-frequency (vf) Any frequency within that part of the radio fre-
quency range essential to speech transmission of a commercial quality (i.e.,
300 to 3400 Hz). Also referred to as telephone frequency.
volt (V) The unit of measurement for electromotive force (emf). It is equiva-
lent to the force required to produce 1 ampere through a resistance of 1
ohm.
voltage (E) The term most often used to designate electrical pressure that
exists between two points and is capable of producing a flow of current
when a closed circuit is connected between the two points. Voltage is meas-
ured in volts, millivolts, microvolts and kilovolts. The terms electromotive
force (emf), potential, potential difference and voltage drop are often referred
to as voltage.
voltage drop The voltage developed across a component or conductor by
the flow of current through the resistance or impedance of that component
or conductor.
voltage hold over refers to the maximum line voltage at which recovery
of the GDT to its inactive state will take place within
a specified period of time (normally 150ms) after an induced lightning
pulse (normally 10/1000ms) has been applied.
VSWR Abbreviation for voltage standing wave ratio. Also see: standing
wave ratio.
W
wavelength The distance between two points which are in phase on adja-
cent waves. It is the distance traveled by the wave in the same span of one
cycle. Electromagnetic waves (both light and radio) have a speed in space
of about 300,000,000 meters (186,000 miles) per second. Thus wavelength
in meters is equal to 300,000,000 divided by frequency.
Z
ZLetter symbol used to represent impedance in ohms.
305
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
306
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
RF Coaxial Solutions for Communications Equipment
Wireless
Base Station
Carrier Rack
Equipment
Chassis
NIC Card
Set Top Box
Wireless Base Station
7-16 Series Connectors, Page 7
Lightning Protection Connectors,
Page 12
7-16 Series
Cable Assemblies,
Page 269
N Series
Cable Assemblies,
Page 269
MCX Connectors,
Page 196
SSMT Connectors,
Page 212
SMP Subminiature
Blindmate Connectors,
Page 152
DIN Inserts, Page 238
COAXICON Contacts,
Page 244
SIEMAX Connectors,
Page 249
N Series Connectors,
Page 20
TNC Connectors,
Page 29
SMA Connectors
Page 100
SMB Connectors
Page 176
Radio base station cabinets
demand packaging that
combines high power r.f.
signals, high speed digital
data, and analog signals.
Cabinet input/output con-
nections are provided by N
Series and 7/16 connectors.
Plug-in r.f. modules require
Blindmate, DIN inserts, and
panel mount connectors.
Transceiver modules utilize
MCX, and SSMT board and
cable connectors for board
to board and panel to
board applications. Finally,
both semi-rigid and flexible
RG cable assemblies route
signals throughout the
entire cabinet.
307
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
308
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
Carrier Rack Equipment
G Series Connectors,
Page 98
F Series Connectors,
Page 93
MMCX Connectors,
Page 218
BNC Connectors,
Page 44
SMA Connectors,
Page 100
SMB Connectors,
Page 176
TNC Connectors,
Page 29
DIN Inserts, Page 238
SIEMAX Connectors,
Page 249
For today’s fast paced
Carrier Equipment market,
Tyco Electronics offers a
broad line of RF intercon-
nect products that meet
demanding customer
requirements for CATV, tele-
com and data transmission
applications. Connectors,
cable assemblies, and
applicator tooling are avail-
able for applications rang-
ing from central office to
customer premise environ-
ments, 50 or 75 ohms, from
rack based equipment to
set top boxes. Styles range
from standard miniature RF
connectors such as F
series, BNC and TNC to
subminiature RF connectors
such as SMA, SMB, SMC
and Blindmate connectors,
to Micro miniature MMCX,
SSMT and SMT/QuickGrip
products. SIEMAX connec-
tors provide multi-positional
surface mount technology
RF connection for pcb and
panel applications, and
offer superior packaging
density. Between Series
adapters are available,
along with connectors
meeting international DIN
and IEC standard inter-
faces. High performance
GHz range BNC connectors
meet the needs for faster
signaling.
Chassis, NIC Card and Set Top Box
Coaxial interconnects have
evolved in the enterprise
market place over the
years. The BNC interfaces
that once dominated the
Ethernet premise installa-
tions to coax products that
provide high speed access
to the carrier infrastructure.
In today’s environment,
Network Interface Cards
(NIC) still feature
Capacitively Decoupled
BNC connectors with built-
in chip capacitors to reduce
noise and ground loop
currents.
For the infrastructure, the
standard coaxial interfaces
to the infrastructure include
both 50 and 75 ohm BNC
connectors. The BNC fam-
ily features numerous styles
including cable plugs and
jacks, adapters and printed
circuit board connectors.
To address manufacturabil-
ity, we offer the board mount
in SMT, wave solder, and
press fit. More recently, the
SMB interface is the one of
choice for improved density
and is available in both
commercial and MIL-type.
Again, our portfolio has a
wide variety of configura-
tions to address your sys-
tem requirements.
Lastly, as broadband CATV
becomes more prevalent
for internet access in cable
modems, our family of
F connectors offer a high
performance solution.
BNC Connectors, Page 44
SMB Connectors, Page 176
F Connectors,
Page 93
Decoupled
BNC, Page 82
NIC Card
Chassis
Set Top Box
309
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
RF Coax Connectors
310
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
222092-1 5222092-1
222092-3 5222092-3
222093-1 5222093-1
222117-1 5222117-1
222132-1 5222132-1
222165-2 5222165-2
222420-1 5222420-1
222462-1 5222462-1
222506-1 5222506-1
222506-5 5222506-5
222506-6 5222506-6
225089-4 5225089-4
225092-8 5225092-8
225349-9 5225349-9
225361-2 5225361-2
225361-4 5225361-4
1-225361-2 1-5225661-2
225363-1 5225363-1
225392-2 5225392-2
225395-1 5225395-1
225395-2 5225395-2
225395-3 5225395-3
225395-6 5225395-6
225395-7 5225395-7
225395-8 5225395-8
1-225395-0 1-5225395-0
2-225395-0 2-5225395-0
4-225395-1 4-5225395-1
4-225395-2 4-5225395-2
225396-1 5225396-1
225396-2 5225396-2
225396-7 5225396-7
225397-1 5225397-1
225397-2 5225397-2
225397-7 5225397-7
225398-1 5225398-1
225398-3 5225398-3
225398-6 5225398-6
225398-7 5225398-7
225398-8 5225398-8
1-225398-5 1-5225398-5
225554-6 5225554-6
1-225554-1 1-5225554-1
225555-2 5225555-2
225555-6 5225555-6
225555-7 5225555-7
225555-8 5225555-8
225557-6 5225557-6
225559-2 5225559-2
225559-8 5225559-8
225661-1 5225661-1
225661-2 5225661-2
1-225661-3 1-5225661-3
1-225661-6 1-5225661-6
225662-2 5225662-2
1-225662-8 1-5225662-8
225664-1 5225664-1
225664-2 5225664-2
1-225664-2 1-5225664-2
1-225667-6 1-5225667-6
225669-1 5225669-1
Non-RoHS RoHS Compliant
Part No. Part No.
13126-1 Exempt
13127-1 Exempt
59980-1 Exempt
69477-1 Exempt
69710-1 Exempt
148385-1 5148385-1
148386-1 5148386-1
189721-1 Exempt
220015-1 Exempt
220220-2 Exempt
220221-2 Exempt
220222-2 Exempt
220224-1 Exempt
221111-1 5221111-1
221123-2 5221123-2
221128-1 5221128-1
1-221128-0 1-5221128-0
1-221128-1 1-5221128-1
1-221128-7 1-5221128-7
2-221128-1 2-5221128-1
2-221128-3 2-5221128-3
2-221128-7 2-5221128-7
3-221128-1 3-5221128-1
221162-1 5221162-1
221185-1 5221185-1
221185-2 5221185-2
221185-3 5221185-3
221185-5 5221185-5
221185-7 5221185-7
221185-8 5221185-8
221185-9 5221185-9
1-221185-0 1-5221185-0
1-221185-8 1-5221185-8
2-221185-9 2-5221185-9
3-221185-1 3-5221185-1
221198-1 5221198-1
221199-1 5221199-1
221199-2 5221199-2
221199-5 5221199-5
221221-1 5221221-1
221221-2 5221221-2
221221-5 5221221-5
221221-7 5221221-7
221244-1 5221244-1
221325-1 5221325-1
221336-3 5221336-3
221336-4 5221336-4
221402-2 5221402-2
221402-4 5221402-4
221506-2 5221506-2
221506-3 5221506-3
221506-5 5221506-5
221629-1 5221629-1
221629-2 5221629-2
221629-4 5221629-4
221629-5 5221629-5
221629-6 5221629-6
1-221629-6 1-5221629-6
221980-1 5221980-1
221981-2 5221981-2
222006-1 5222006-1
Non-RoHS RoHS Compliant
Part No. Part No.
225669-2 5225669-2
225699-1 5225699-1
225886-1 5225886-1
225886-4 5225886-4
225886-5 5225886-5
225886-7 5225886-7
225974-1 5225974-1
225974-2 5225974-2
225974-5 5225974-5
226978-1 5226978-1
226978-3 5226978-3
226990-1 5226990-1
226990-3 5226990-3
226990-6 5226990-6
226993-1 5226993-1
226993-2 5226993-2
226993-3 5226993-3
226993-6 5226993-6
227079-5 5227079-5
227079-6 5227079-6
227079-7 5227079-7
1-227079-1 1-5227079-1
1-227079-6 1-5227079-6
1-227079-9 1-5227079-9
2-227079-2 2-5227079-2
4-227079-3 4-5227079-3
5-227079-3 5-5227079-3
6-227079-1 6-5227079-1
6-227079-7 6-5227079-7
6-227079-8 6-5227079-8
8-227079-2 8-5227079-2
1-227086-0 1-5227086-0
227161-1 5227161-1
227161-2 5227161-2
227161-3 5227161-3
227161-6 5227161-6
227161-7 5227161-7
227161-9 5227161-9
227169-5 5227169-5
227169-7 5227169-7
227169-8 5227169-8
227222-1 5227222-1
227222-2 5227222-2
227222-3 5227222-3
227222-6 5227222-6
227426-1 5227426-1
227661-1 5227661-1
227671-1 5227671-1
227673-1 5227673-1
227676-1 5227676-1
227677-1 5227677-1
227699-1 5227699-1
227699-2 5227699-2
227699-3 5227699-3
227716-3 5227716-3
227726-1 5227726-1
227726-2 5227726-2
227726-3 5227726-3
227755-1 5227755-1
227755-2 5227755-2
227755-3 5227755-3
Non-RoHS RoHS Compliant
Part No. Part No.
227764-2 5227764-2
227818-1 5227818-1
227820-1 5227820-1
227839-1 5227839-1
228217-1 5228217-1
228226-1 5228226-1
228226-3 5228226-3
228435-1 5228435-1
228596-1 5228596-1
228596-2 5228596-2
228596-3 5228596-3
228596-4 5228596-4
228596-5 5228596-5
228618-1 5228618-1
228618-2 5228618-2
228618-3 5228618-3
228618-4 5228618-4
228618-5 5228618-5
228686-1 5228686-1
228979-5 5228979-5
228979-6 5228979-6
228979-7 5228979-7
228980-5 5228980-5
228980-6 5228980-6
228980-7 5228980-7
307581-1 Exempt
311386-1 Exempt
311386-2 Exempt
311386-3 Exempt
311392-1 Exempt
311395-1 Exempt
311396-1 Exempt
312067-1 Exempt
312253-1 Exempt
312253-2 Exempt
312317-1 Exempt
2-329444-1 2-5329444-1
2-329444-2 2-5329444-2
2-329445-1 2-5329445-1
2-329446-1 2-5329446-1
2-329452-2 2-5329452-2
2-329456-1 2-5329456-1
2-329458-1 2-5329458-1
329517 5329517
2-330061-1 2-5330061-1
2-330062-1 2-5330062-1
2-330063-1 2-5330063-1
2-330358-2 2-5330358-2
330876 5330876
330878 5330878
331175 5331175
331178 5331178
331182 5331182
331238 5331238
332215 5332215
332225-3 5332225-3
332225-5 5332225-5
332225-6 5332225-6
332225 5332225
332342 5332342
413194-1 5413194-1
Non-RoHS RoHS Compliant
Part No. Part No.
RF Coax Connectors
Non-RoHS to RoHS Compliant Part Number Cross Reference
311
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Non-RoHS to RoHS Compliant Part Number Cross Reference (Continued)
413194-2 5413194-2
413311-1 5414311-1
413364-2 5413364-2
413366-2 5413366-2
413476-2 5413476-2
413506-1 5413506-1
413515-2 5413515-2
413515-3 5413515-3
413515-7 5413515-7
413515-8 5413515-8
413515-9 5413515-9
413524-2 5413524-2
413524-5 5413524-5
413557-1 5413557-1
413557-2 5413557-2
413558-1 5413558-1
413558-2 5413558-2
413558-3 5413558-3
413558-5 5413558-5
413588-2 5413588-2
413588-4 5413588-4
413588-8 5413588-8
413588-9 5413588-9
1-413588-0 1-5413588-0
413589-1 5413589-1
413589-2 5413589-2
413589-3 5413589-3
413589-5 5413589-5
413589-7 5413589-7
413589-8 5413589-8
413589-9 5413589-9
1-413589-0 1-5413589-0
1-413589-1 1-5413589-1
1-413589-6 1-5413589-6
413590-3 5413590-3
413590-4 5413590-4
413590-8 5413590-8
413591-1 5413591-1
413592-2 5413592-2
413592-6 5413592-6
413592-9 5413592-9
1-413592-1 1-5413592-1
413631-1 5413631-1
413631-2 5413631-2
413631-3 5413631-3
413760-1 5413760-1
413760-3 5413760-3
413760-8 5413760-8
413760-9 5413760-9
413771-1 5413771-1
413771-3 5413771-3
413779-3 5413779-3
2-413779-4 2-5413779-4
413879-1 5413879-1
413879-2 5413879-2
413933-1 5413933-1
413959-1 5413959-1
413959-3 5413959-3
413959-4 5413959-4
413959-5 5413959-5
413959-6 5413959-6
Non-RoHS RoHS Compliant
Part No. Part No.
413969-2 5413969-2
413986-1 5413986-1
414088-1 5414088-1
414094-2 5414094-2
414105-1 5414105-1
414160-5 5414160-5
414168-1 5414168-1
414168-3 5414168-3
414168-4 5414168-4
414168-5 5414168-5
414168-6 5414168-6
414170-1 5414170-1
414170-2 5414170-2
414171-3 5414171-3
414173-3 5414173-3
414194-1 5414194-1
414215-1 5414215-1
414217-1 5414217-1
414265-3 5414265-3
414284-2 5414284-2
414305-1 5414305-1
414337-1 5414337-1
414338-1 5414338-1
414352-1 5414352-1
414363-3 5414363-3
414363-4 5414363-4
414363-5 5414363-5
414363-8 5414363-8
414367-2 5414367-2
414373-1 5414373-1
414394-1 5414394-1
414409-1 5414409-1
414414-1 5414414-1
414459-1 5414459-1
414460-1 5414460-1
414493-4 5414493-4
414553-1 5414553-1
414651-3 5414651-3
414666-1 5414666-1
414758-1 5414758-1
414758-2 5414758-2
414758-3 5414758-3
414907-1 5414907-1
414946-2 5414946-2
414946-3 5414946-3
414946-5 5414946-5
414946-6 5414946-6
415006-1 5415006-1
415006-2 5415006-2
415020-1 5415020-1
415024-1 5415024-1
415024-3 5415024-3
415025-1 5415025-1
415025-2 5415025-2
415046-1 5415046-1
415085-1 5415085-1
415103-1 5415103-1
415103-2 5415103-2
415105-1 5415105-1
415105-2 5415105-2
415187-1 5415187-1
Non-RoHS RoHS Compliant
Part No. Part No.
415189-1 5415189-1
415205-1 5415205-1
415214-1 5415214-1
415216-1 5415216-1
415218-5 5415218-5
415226-1 5415226-1
415232-4 5415232-4
415232-7 5415232-7
415242-2 5415242-2
415242-6 5415242-6
415248-1 5415248-1
415248-7 5415248-7
415252-1 5415252-1
415252-2 5415252-2
415252-3 5415252-3
415252-4 5415252-4
415255-1 5415255-1
415255-2 5415255-2
415255-3 5415255-3
415255-4 5415255-4
415276-2 5415276-2
415302-1 5415302-1
415302-2 5415302-2
415322-2 5415322-2
415332-1 5415332-1
415379-1 5415379-1
415381-1 5415381-1
415406-2 5415406-2
415417-1 5415417-1
415419-1 5415419-1
415485-1 5415485-1
415485-2 5415485-2
415485-3 5415485-3
415487-1 5415487-1
415487-2 5415487-2
415487-3 5415487-3
415520-1 5415520-1
415569-2 5415569-2
415632-1 5415632-1
415632-2 5415632-2
415633-1 5415633-1
415634-1 5415634-2
415634-2 5415634-2
415683-1 5415683-1
415712-1 5415712-1
415779-1 5415779-1
415832-1 5415832-1
447648-3 5447648-3
448103-2 5448103-2
603995-1 Exempt
603995-2 Exempt
603995-3 Exempt
603995-5 Exempt
603995-6 Exempt
856402-1 Exempt
887000-1 5887000-1
887046-1 5887046-1
887078-1 5887078-1
887089-1 5887089-1
1055439-1 Exempt
1055440-1 Exempt
Non-RoHS RoHS Compliant
Part No. Part No.
1055441-1 Exempt
1055442-1 Exempt
1055443-1 Exempt
1055444-1 Exempt
1055445-1 Exempt
1055446-1 Exempt
1055447-1 Exempt
1055448-1 Exempt
1055449-1 Exempt
1055450-1 Exempt
1055451-1 Exempt
1055454-1 Exempt
1055474-1 Exempt
1055475-1 Exempt
1055476-1 Exempt
1055477-1 Exempt
1055500-1 Exempt
1055831-1 Exempt
1055832-1 Exempt
1055833-1 Exempt
1055834-1 Exempt
1055836-1 Exempt
1055837-1 Exempt
1055838-1 Exempt
1055839-1 Exempt
1055840-1 Exempt
1055841-1 Exempt
1055842-1 Exempt
1055843-1 Exempt
1057088-1 6057088-1
1057094-1 6057094-1
1057116-1 6057116-1
1057159-1 6057159-1
1057165-1 6057165-1
1057176-1 6057176-1
1059632-1 6059632-1
1059665-1 6059665-1
1061002-1 6061002-1
1061035-1 6061035-1
1061092-1 6061092-1
1061094-1 6061094-1
1213890-1 Exempt
1274020-1 6274020-1
1274032-1 6274032-1
1274045-1 6274045-1
1274072-1 6274072-1
1274084-1 6274084-1
1274086-1 6274086-1
1274096-1 6274096-1
1274124-2 6274124-2
1274127-1 6274127-1
1274220-1 6274220-1
1274291-1 6274291-1
1274291-2 6274291-2
1274314-1 6274314-1
1274315-1 6274315-1
1274359-1 6274359-1
1274360-1 6274360-1
1274425-2 6274425-2
1274431-1 6274431-1
1274532-1 6274532-1
Non-RoHS RoHS Compliant
Part No. Part No.
RF Coax Connectors
312
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Non-RoHS to RoHS Compliant Part Number Cross Reference (Continued)
1361137-1 6361137-1
1361138-1 1361138-1
1361139-1 6361139-1
1362765-1 6362765-1
1363524-1 6363524-1
1363525-1 6363525-1
1363526-1 6363526-1
1363527-1 6363527-1
1393488-3 Exempt
1393488-4 Exempt
1393524-1 Exempt
1393524-4 Exempt
1393524-5 Exempt
Non-RoHS RoHS Compliant
Part No. Part No.
1311164-1 Exempt
1312079-1 6312079-1
1312113-1 6312113-1
1312121-1 6312121-1
1312123-1 6312123-1
1312124-1 6312124-1
1312137-1 1312137-1
1312138-1 6312138-1
1312139-1 6312139-1
1328873-1 6328873-1
1329818-1 6329818-1
1329819-1 1329819-1
1331959-1 6331959-1
Non-RoHS RoHS Compliant
Part No. Part No.
1-1393524-1 Exempt
2-1393524-4 Exempt
2-1393524-6 Exempt
2-1393524-7 Exempt
1393665-1 6-1393665-1
1-1393665-4 —
1-1393665-5 —
1-1393665-6 —
1-1393665-7 —
2-1393670-1 —
2-1393670-2 —
2-1393670-3 —
2-1393670-4 —
Non-RoHS RoHS Compliant
Part No. Part No.
1393696-2 6-1393696-2
1393696-7 6-1393696-7
1402314-1 1402314-1
1408026-1 6408026-1
1408027-1 6408027-1
1408028-1 6408028-1
1408030-1 6408030-1
1408032-1 6408032-1
1408033-1 6408033-1
1408036-1 6408036-1
1408037-1 6408037-1
1408038-1 6408038-1
1725637-1 Exempt
Non-RoHS RoHS Compliant
Part No. Part No.
RF Coax Connectors
313
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
127669-92 1311164-1
127893-98 1402314-1
2001 5003 02 1050525-1
2001 5031 02 1050542-1
2001 5032 02 1050548-1
2001 5385 02 1050598-1
2001 5395 02 1050602-1
2001 5443 02 1050611-1
2001 7188 02 1050721-1
2001 7641 02 1050740-1
2001 7941 02 1050757-1
2001 7985 02 1050770-1
2002 5015 00 1050854-1
2002 5016 00 1050859-1
2002 7188 02 1050903-1
2004 7188 02 1050996-1
2004 7641 02 1051005-1
2004 7685 02 1051007-1
2006 5010 00 1051046-1
2006 5013 00 1051052-1
2006 7941 00 1051081-1
2006 7985 00 1051085-1
2007 7188 02 1051140-1
2007 7641 02 1051145-1
2007 7685 02 1051147-1
2007 7941 02 1051151-1
2007 7985 02 1051157-1
2031 5002 00 1051638-1
2031 5003 02 1051644-1
2032 5002 00 1051852-1
2032 5003 02 1051855-1
2032 5007 00 1051861-1
2032 5021 02 1051867-1
2032 5026 02 1051869-1
2034 5008 00 1051942-1
2037 5005 02 1052063-1
2037 5006 02 1052067-1
2037 5007 02 1052072-1
2037 5008 02 1052076-1
2037 5100 02 1052098-1
2051 0000 02 1052324-1
2051 1352 02 1052349-1
2051 1618 02 1052360-1
2052 0000 02 1052422-1
2052 1200 02 1052518-1
2052 1201 00 1052522-1
2052 1201 02 1052523-1
2052 1215 02 1052528-1
2052 1300 02 1052534-1
2052 1350 02 1052544-1
2052 1352 02 1052552-1
2052 1612 02 1052563-1
2052 1658 02 1052577-1
2052 3354 02 1052628-1
2052 3356 02 1052634-1
2052 3358 02 1052643-1
2052 3359 02 1052646-1
2052 3363 02 1052652-1
2052 3500 02 1052684-1
2052 3502 02 1052689-1
2052 5636 02 1052898-1
M/A-COM Tyco Electronics
Part No. Part No.
2052 5674 02 1052902-1
2054 1201 02 1052978-1
2054 1231 02 1052982-1
2054 1241 02 1052986-1
2056 5006 02 1053092-1
2058 5029 02 1053222-1
2062 0000 00 1053354-1
2064 0000 00 1053378-1
2080 0000 00 1053488-1
2081 0000 02 1053635-1
2081 2301 00 1053646-1
2082 2249 02 1053780-1
2082 2700 00 1053788-1
2082 5133 02 1054426-1
2084 0000 02 1054869-1
2086 0000 02 1055018-1
2087 1230 02 1055047-1
2088 0000 02 1055065-1
2098 5206 54 1055439-1
2098 5207 54 1055440-1
2098 5208 54 1055441-1
2098 5209 02 1055442-1
2098 5210 02 1055443-1
2098 5211 02 1055444-1
2098 5212 02 1055445-1
2098 5213 02 1055446-1
2098 5214 02 1055447-1
2098 5215 02 1055448-1
2098 5216 54 1055449-1
2098 5217 54 1055450-1
2098 5218 02 1055451-1
2098 5221 10 1055454-1
2098 5279 10 1055474-1
2098 5281 02 1055475-1
2098 5282 02 1055476-1
2098 5283 02 1055477-1
2098 5516 02 1055500-1
2204 7941 09 1082029-1
2207 7985 09 1088312-1
2231 7388 36 1082034-1
2318 0000 54 1085456-1
2367 0000 54 1251802-1
2367 5001 54 1083946-1
2367 5002 54 1055689-1
2380 2240 00 1055694-1
2381 2241 00 1055695-1
2382 2240 00 1055696-1
2382 2241 00 1055697-1
2399 5011 54 1086008-1
2399 5012 54 1086009-1
2598 5196 54 1055831-1
2598 5197 54 1055832-1
2598 5198 54 1055833-1
2598 5199 54 1055834-1
2598 5201 54 1055836-1
2598 5202 54 1055837-1
2598 5203 54 1055838-1
2598 5204 54 1055839-1
2598 5205 54 1055840-1
2598 5206 54 1055841-1
2598 5207 54 1055842-1
M/A-COM Tyco Electronics
Part No. Part No.
2598 5208 54 1055843-1
2598 5342 54 1221286-1
2598 5438 54 1088313-1
2831 7316 02 1056436-1
2831 7341 02 1056438-1
2831 7388 02 1056443-1
2834 7316 02 1056445-1
2834 7341 02 1056447-1
2834 7358 02 1056450-1
2834 7388 02 1056452-1
2837 7316 02 1056456-1
2837 7388 02 1056462-1
2902 7947 62 1056526-1
2902 7985 62 1056527-1
2908 7947 62 1056553-1
2908 7985 62 1056554-1
2965 5006 62 1061692-1
2980 0000 62 1056700-1
2980 2240 00 1056702-1
2981 2241 00 1056706-1
2982 2240 00 1056707-1
2982 2241 00 1056708-1
2998 5001 02 1056721-1
2998 5002 02 1056722-1
2998 5003 02 1056724-1
2998 5022 94 1056728-1
2998 5028 02 1056729-1
2998 5030 02 1056731-1
2998 5035 02 1056736-1
2998 5043 02 1056743-1
2998 5044 02 1056744-1
2998 5045 02 1056745-1
2998 5054 94 1056750-1
2998 5055 94 1056751-1
2998 5056 94 1056752-1
3001 7941 00 6057088-1
3001 7985 00 6057094-1
3002 7941 00 6057116-1
3004 7941 00 6057159-1
3004 7985 00 6057165-1
3006 7941 00 6057176-1
3051 0000 10 1057275-1
3051 1200 10 1057277-1
3051 1201 10 1057279-1
3052 0000 10 1057284-1
3052 1201 10 1057290-1
3080 2240 00 1057341-1
3080 2242 00 1057343-1
3081 2241 00 1057367-1
3082 0000 00 1057374-1
3082 2240 00 1057377-1
3082 2241 00 1057381-1
3082 2243 00 1057385-1
3082 2310 00 1057387-1
3082 2311 00 1057388-1
3082 2320 00 1057390-1
3082 2321 00 1057392-1
3084 2240 00 1057463-1
3101 7941 00 1057631-1
3101 7985 00 1057635-1
3104 7941 00 1057676-1
M/A-COM Tyco Electronics
Part No. Part No.
3104 7985 00 1057679-1
3106 7941 00 1057697-1
3106 7985 00 1057699-1
3152 0000 10 1057775-1
3152 1201 10 1057780-1
3180 2242 00 1057841-1
3180 2302 00 1057843-1
3180 2320 00 1057845-1
3182 2240 00 1057853-1
3182 2243 00 1057857-1
3184 2240 00 1057908-1
3280 2224 00 1058056-1
3280 2240 00 1058058-1
3281 2223 00 1058066-1
3282 2223 00 1058077-1
3282 2240 00 1058081-1
3282 2241 00 1058083-1
3284 2240 00 1058117-1
3680 2240 00 1058651-1
3680 2242 00 1058653-1
3682 2241 00 1058664-1
3682 2242 00 1058666-1
3684 2240 00 1058675-1
4503 7685 02 1059399-1
4503 7941 00 1059402-1
4503 7985 00 1059404-1
4504 7641 02 1059408-1
4504 7941 00 1059410-1
4504 7985 00 1059412-1
4506 7641 02 1059451-1
4506 7685 02 1059452-1
4506 7941 02 1059453-1
4506 7985 02 1059456-1
4510 7941 00 1059465-1
4510 7985 00 1059467-1
4522 7941 02 1059505-1
4522 7985 02 1059506-1
4533 7388 02 1059523-1
4534 7341 02 1059525-1
4536 5014 02 1058572-1
4536 7341 02 1059540-1
4536 7388 02 1059541-1
4540 7388 02 1059551-1
4551 1201 02 1059563-1
4551 1352 02 1059566-1
4551 3357 02 1059572-1
4552 1201 02 1059594-1
4552 1352 02 1059596-1
4557 5009 02 1059617-1
4557 5119 02 6059632-1
4557 5329 02 1059637-1
4557 5368 02 1059651-1
4558 1154 02 1059654-1
4558 5009 02 1059657-1
4558 5119 02 6059665-1
4558 5329 02 1059671-1
4562 0000 00 1059681-1
4563 0000 00 1059684-1
4563 5004 00 1253111-1
4565 0000 00 1059691-1
4580 2240 02 1059707-1
M/A-COM Tyco Electronics
Part No. Part No.
RF Coax Connectors
M/A-COM to Tyco Electronics Part Number Cross Reference
314
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
M/A-COM to Tyco Electronics Part Number Cross Reference (Continued)
5837 5025 10 1330723-1
5837 5030 10 1329293-1
5837 5031 09 1363301-2
5837 5031 10 1363301-1
5858 0000 09 1060959-1
5858 0000 10 1060960-1
5862 5002 09 1060984-1
5862 5002 10 1060985-1
5862 5003 09 1330126-1
5862 5003 10 1060989-1
5862 5004 09 1060995-1
5862 5004 10 1060996-1
5862 5007 13 6061002-1
5862 5018 13 1061007-1
5863 0000 09 1085221-1
5863 0000 10 1061015-1
5864 5001 09 1061022-1
5864 5001 10 1061023-1
5864 5002 09 1061026-1
5864 5002 10 1061027-1
5864 5003 09 1061029-1
5864 5003 10 1061030-1
5864 5008 13 6061035-1
5880 2240 00 1061070-1
5881 2241 00 1061071-1
5882 2240 00 1061072-1
5882 2241 00 1061073-1
5899 5004 54 6061092-1
5899 5009 54 6061094-1
7081 2301 00 1061738-1
7081 2311 00 1061739-1
7081 5008 00 1061742-1
7081 5009 00 1061744-1
7082 2242 00 1061750-1
7082 2243 00 1061751-1
7082 2300 00 1061752-1
7082 2310 00 1061753-1
7082 5004 00 1061757-1
7082 5005 00 1061758-1
9631 7179 10 1362990-1
9637 7179 10 1362991-1
9662 5000 10 1361169-1
9664 0000 10 1363106-1
9960 1100 24 1064524-1
9960 1200 24 1064530-1
9960 1305 24 1064533-1
9960 2100 24 1064535-1
9960 2200 24 1064538-1
9960 2305 24 1064540-1
9960 2510 24 1064542-1
M/A-COM Tyco Electronics
Part No. Part No.
4581 2241 02 1059711-1
4581 2700 00 1059713-1
4582 2240 02 1059716-1
4582 2241 02 1059718-1
4582 2700 00 1059720-1
4583 2240 02 1059724-1
4584 2240 02 1059729-1
4584 2242 02 1059731-1
4584 2244 02 1059733-1
4585 2240 02 1059756-1
4585 2241 02 1059758-1
4703 7985 00 1059857-1
4706 7985 02 1059868-1
4710 7985 00 1059874-1
4733 7316 02 1059884-1
4733 7388 02 1059886-1
4736 5001 02 1059887-1
4736 7316 02 1059888-1
4740 7388 00 1059889-1
4751 3355 02 1059894-1
4757 1154 02 1059901-1
4757 3204 00 1059902-1
4757 5006 02 1059903-1
4757 5014 00 1059905-1
4763 0000 00 1059919-1
5001 5015 09 1060163-1
5007 5008 09 1060183-1
5031 5007 09 1060220-1
5031 5014 09 1060221-1
5062 5003 09 1060256-1
5064 5003 09 1060259-1
5134 5016 10 1254781-1
5180 2240 00 1060487-1
5181 2241 00 1060494-1
5182 2240 00 1060498-1
5182 2241 00 1060500-1
5801 7947 09 1060772-2
5801 7985 09 1060772-1
5802 7947 09 1060774-2
5802 7985 09 1060774-1
5807 7985 09 1060787-1
5818 5002 09 1060811-2
5818 5002 10 1060811-1
5818 5003 10 1060813-1
5831 5002 10 1060869-1
5831 5003 09 1060871-1
5831 5003 10 1060872-1
5831 7316 09 1060875-2
5831 7316 10 1060875-1
5834 7388 10 1060883-1
M/A-COM Tyco Electronics
Part No. Part No.
9960 3100 24 1082845-1
9960 4100 01 1064543-1
9960 4100 02 1064544-1
9960 4100 04 1064546-1
9960 4100 07 1064549-1
9960 4100 08 1064550-1
9960 4200 01 1064552-1
9960 4200 02 1064553-1
9960 4200 04 1064555-1
9960 4200 07 1064558-1
9960 4200 08 1064559-1
9960 4305 01 1064560-1
9960 4305 02 1064561-1
9960 4305 04 1064563-1
9960 4305 07 1064566-1
9960 4305 08 1064567-1
9980 4100 01 1329174-1
9980 4100 02 1329175-1
9980 4100 04 1408050-4
9980 4100 05 1255378-4
9980 4100 07 1408051-4
9980 4100 08 1330401-4
9980 4200 01 1329174-2
9980 4200 02 1329175-2
9980 4200 04 1408050-5
9980 4200 05 1255378-5
9980 4200 07 1408051-5
9980 4200 08 1330401-5
9980 4305 01 1310432-1
9980 4305 02 1329175-3
9980 4305 04 1408050-6
9980 4305 05 1255378-6
9980 4305 07 1408051-6
9980 4305 08 1330401-6
A55P22E999X 1311206-1
A55P23E999X 1313453-1
A55X01B999X 6312079-1
A57R03G999X 1311209-1
B67A54T022X 1311097-1
B67A54T117X 1311098-1
B67A64T022X 1311099-1
B67A64T062X 1311100-1
B67A64T280X 1311696-1
B67A64T437X 1311102-1
B67A64TA25X 1313507-1
B67B42T022X 1311103-1
B67B42T437X 1311104-1
B67B44T022X 1311106-1
B67B44T062X 1311698-1
B67B44T437X 1311111-1
M/A-COM Tyco Electronics
Part No. Part No.
B67B44TA25X 1313508-1
B67E64T022X 1408041-1
B67H16T493X 1313511-1
B67H49T022X 1311115-1
B67H64T022X 1327083-1
B67H64T062X 1311117-1
B67H64T117X 1311700-1
B67H64T280X 1313883-1
B67H64T437X 1311118-1
B67H64TA25X 1313887-1
B67H66T022X 1311120-1
B67H66T062X 1311701-1
B67H66T437X 1311122-1
B67H74T463X 1314422-1
B67N08T999X 1311125-1
B67N12T999X 1314103-1
B67N25T999X 1314102-1
B67P34G999X 1313364-1
B67R53G999X 1311127-1
B67Z50T999X 6-1311703-1
C65E06G022X 1311638-1
D75A02B001X 6331959-1
D75A02B004X 6362765-1
D75B01B470X 6328873-1
D75B02B010X 6408028-1
D75B03B001X 6408030-1
D75B03B004X 6312113-1
D75B04B004X 6408027-1
D75B04B010X 6408026-1
D75B05B004X 6408038-1
D75G03B001R 6408032-1
D75G03B004R 6408033-1
D75G07B060R 6363524-1
D75G08B001R 6363525-1
D75G08B004R 6363526-1
D75G09B010R 6363527-1
D75G10B004R 6408036-1
D75R02B999X 6408037-1
D75X06B999X 6312121-1
D75X12E470X 6312123-1
D75X14B999X 6312124-1
D75X15B999X 6361137-1
N15X09E470X 1312137-1
N15X10B999X 6312138-1
N15X12E470X 6329818-1
N15X14E010X 6312139-1
N15X16E999X 1361138-1
N15X17E999X 6361139-1
N15X18E010X 1329819-1
T35E60E010X 1312569-1
M/A-COM Tyco Electronics
Part No. Part No.
RF Coax Connectors
315
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Note: This index lists all cataloged parts
by base no. only. Complete part nos.
(with prefixes and/or suffixes) are shown
on the page(s) indicated.
RF Coax Connectors
1052689 120
1052898 118
1052902 119
1052978 117
1052982 117
1052986 117
1053092 115
1053222 117
1053354 121
1053378 121
1053488 122
1053635 122
1053646 256
1053780 123
1053788 259
1054426 123
1054869 123
1055018 122
1055047 123
1055065 122
1055689 214
1055694 217, 255
1055695 217, 253
1055696 217, 258
1055697 217, 259
1056436 106
1056438 106
1056443 106
1056445 107
1056447 107
1056450 107
1056452 107
1056456 108
1056462 108
1056526 154
1056527 154
1056553 154
1056554 154
1056700 152, 154
1056702 255
1056706 253
1056707 258
1056708 259
1056721 152, 155
1056722 155
1056724 155
1056728 156
1056729 155
1056731 155
1056736 155
1056743 155
1056744 155
1056745 155
1056750 156
1056751 156
1056752 156
1057275 24
1057277 24
1057279 24
1057284 24
1057290 24
1057341 254
Part No. Page
50084 246
50095 246
50105 246
50107 246
51563 247, 248
51565 248
51692 21
51751 194
201097 245
201098 245
201143 245
201144 245
201145 245
201146 245
221108 58, 72, 73
221500 41
221509 42
221539 94
221540 94
221543 63
221551 64
221586 63
221789 121
221790 121
221951 55, 56
221988 63
222163 61, 74
222428 52
225014 22
225088 248
225093 22
225094 23
225348 38
225389 22
225551 35
225668 23
225886 49
226023 247
226060 247
226537 248
227223 55, 56
227945 25
228179 33
228215 182
228216 182
228502 37
228553 179
228658 23
282938 97
329631 57, 58, 59
73, 91
329632 57, 58, 59,
73, 91
330022 65
330024 64
330620 54
332056 248
332057 248
413453 65
Part No. Page
413985 178
413990 180
413996 181
414002 178
414026 181
414171 35
414396 43
414612 180
414766 94
414895 182
414946 178
414948 179
414963 181
414969 182
415001 182
415232 21
415327 99
415340 181
415377 185
415380 181
415381 181
415490 185
415500 184
415504 185
415523 99
415567 76
415672 181
415774 180
415796 64
619028 230, 235
619041 230
619052 235
619053 236
619061 230, 231
619062 230, 231
619068 235
619072 230, 231
619075 233
619076 235
619078 230, 235
619085 131
619106 136
619107 133
619115 115
619127 204
619133 232
619134 204
619135 204
619137 235
619196 234
619201 233
619210 236
619211 234
619213 234
619214 236
619215 127
619219 261
619220 136
619223 131
619224 131
619226 135
619228 135
Part No. Page
619229 206
619231 233
619238 206
619271 261
887098 94
1050525 110
1050542 110
1050548 110
1050598 112
1050602 112
1050611 112
1050721 105
1050740 112
1050757 110
1050770 110
1050854 110
1050859 110
1050903 105
1050996 106
1051005 113
1051007 113
1051046 111
1051052 111
1051081 111
1051085 111
1051140 106
1051145 113
1051147 113
1051151 112
1051157 112
1051638 104
1051644 104
1051852 104
1051855 107
1051861 104
1051867 107
1051869 107
1051942 104
1052063 105
1052067 105
1052072 108
1052076 108
1052098 108
1052324 114
1052349 116
1052360 118
1052422 114
1052518 116
1052522 116
1052523 116
1052528 119
1052534 114
1052544 114
1052552 116
1052563 118
1052577 119
1052628 120
1052634 120
1052643 120
1052646 120
1052652 120
1052684 120
Part No. Page
Part Number Index
316
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
RF Coax Connectors
1059617 165
1059637 167
1059651 165
1059654 165
1059657 165
1059671 168
1059681 166
1059684 166
1059691 166
1059707 255
1059711 253
1059713 256
1059716 259
1059718 257
1059720 257
1059724 255
1059729 255
1059731 255
1059733 255
1059756 259
1059758 257
1059857 171
1059868 171
1059874 171
1059884 172
1059886 172
1059887 172
1059888 172
1059889 172
1059894 175
1059901 173
1059902 175
1059903 173
1059905 175
1059919 174
1060163 194
1060183 195
1060220 194
1060221 194
1060256 195
1060259 195
1060487 255
1060494 253
1060498 258
1060500 258
1060772 199
1060774 199
1060787 200
1060811 198
1060813 198
1060869 198
1060871 198
1060872 198
1060875 198
1060883 199
1060959 201
1060960 201
1060984 200
1060985 200
1060989 200
1060995 200
1060996 200
Part No. Page
1057343 254
1057367 253
1057374 25
1057377 258
1057381 257
1057385 257
1057387 258
1057388 257
1057390 257
1057392 257
1057463 254
1057631 33
1057635 33
1057676 37
1057679 37
1057697 38
1057699 38
1057775 41
1057780 41
1057841 254
1057843 254
1057845 254
1057853 258
1057857 258
1057908 255
1058056 254
1058058 254
1058066 253
1058077 257
1058081 258
1058083 257
1058117 254
1058572 163
1058651 255
1058653 255
1058664 257
1058666 259
1058675 255
1059399 162
1059402 158, 160
1059404 158, 160
1059408 162
1059410 158, 160
1059412 158, 160
1059451 162
1059452 162
1059453 160
1059456 160
1059465 161
1059467 161
1059505 161
1059506 161
1059523 163
1059525 163
1059540 163
1059541 163
1059551 163
1059563 164
1059566 164
1059572 168
1059594 164
1059596 164
Part No. Page
1061007 201
1061015 200
1061022 201
1061023 201
1061026 201
1061027 201
1061029 201
1061030 201
1061070 254
1061071 253
1061072 258
1061073 256
1061692 156
1061738 256
1061739 256
1061742 256
1061744 256
1061750 259
1061751 256
1061752 257
1061753 258
1061757 256
1061758 258
1064524 214
1064530 214
1064533 214
1064535 215
1064538 215
1064540 215
1064542 215
1064543 216
1064544 216
1064546 216
1064549 217
1064550 217
1064552 216
1064553 216
1064555 216
1064558 217
1064559 217
1064560 216
1064561 216
1064563 216
1064566 217
1064567 217
1082029 111
1082034 106
1082845 215
1083946 214
1085221 200
1085456 209
1086008 209
1086009 209
1088312 112
1088313 209
1221286 217
1251802 214
1253111 166
1255378 211
1274007 77
1274191 239
1274192 239
Part No. Page
1274330 181
1274449 133
1274513 145
1274520 133
1274544 134
1274563 80
1274566 80
1274568 80
1274571 81
1274572 81
1274584 81
1274594 133
1274662 28
1274663 81
1274668 57
1274684 81
1274688 27
1274689 27
1274694 109
1274714 137
1274734 27
1274735 27
1274794 237
1274795 237
1274804 27
1274805 27
1274806 27
1274807 28
1274808 28
1274935 76
1310432 210
1311097 187
1311098 187
1311099 187
1311100 187
1311101 187
1311102 187
1311103 188
1311104 188
1311106 188
1311111 188
1311115 189
1311117 190
1311118 190
1311120 189
1311122 189
1311125 190
1311127 191
1311206 254
1311209 254
1311638 194
1311696 187
1311698 188
1311700 190
1311701 189
1311703 191
1312137 18
1312569 35
1313364 191
1313453 253
1313507 187
1313508 188
Part No. Page
317
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
RF Coax Connectors
5329458 53
5329517 64
5330061 47
5330062 51
5330063 53
5330358 48
5330876 47
5330878 49
5331175 50
5331178 50
5331182 50
5331238 36
5332215 92
5332225 90
5332342 90
5413194 72
5413364 65
5413366 63
5413476 85
5413506 43
5413515 85
5413524 85
5413557 65
5413558 75
5413588 68
5413589 66, 67
5413590 67, 70
5413591 42
5413592 63
5413631 62
5413760 69
5413771 53, 54
5413779 51
5413879 57
5413933 40
5413959 50
5413969 60
5413986 74
5414088 74
5414094 85
5414105 64
5414160 21
5414168 36
5414170 179
5414171 35
5414173 34
5414194 56
5414215 85
5414217 71
5414265 50
5414284 85
5414305 60
5414311 63
5414337 181
5414338 181
5414352 85
5414363 178
5414367 88
5414373 62
5414394 74
5414409 72
5414414 64
Part No. Page
1313511 189
1313883 190
1313887 190
1314102 190
1314103 190
1314422 190
1327083 190
1329174 210
1329175 210
1329293 198
1329819 18
1330126 200
1330401 211
1330723 198
1361138 18
1361169 203
1362990 203
1362991 203
1363106 203
1363301 198
1392019 240
1392020 240
1393562 137, 147
1393662 241
1393665 148, 149, 150,
253, 256, 259
1393668 240
1393670 131, 132, 133, 134,
135, 136, 147, 253,
256, 259, 260
1393672 141, 142, 143
1393680 140, 142, 143, 144
1393681 140, 141, 143,
145, 146, 150
1393682 140, 141, 142,
143, 144
1393696 250
1393757 142, 145, 220
1402314 15
1407578 208
1408041 188
1408050 211
1408051 211
1408120 221
1408148 219
1408149 219
1408150 220
1408151 220
1408152 221
1408312 219
1408313 219
1408314 219
1408332 127
1408333 126
1408336 126
1408337 127
1408338 126
1408339 126
1408340 128
1408341 128
1408342 128
1408343 128, 260
1408346 125
Part No. Page
1408347 125
1408348 125
1408349 125
1408393 128, 253
1408496 220
1408541 109
1442004 206
1460010 131
1460052 10
1460055 25
1460060 134
1460118 25
1460128 144
1460132 141
1460139 134
1460159 9
1460169 144
1460468 115
1460469 115
1460470 195
1460802 261
1460803 261
1460815 135
1460817 135
1460821 147, 148
1460823 146
1484546 174
1566230 224
1658260 204
1750107 225
1750108 225
1750109 225
1750110 226
1775146 224
1775227 227, 260
1775228 227, 260
1775229 227, 259
1775230 227, 259
5148385 239
5148386 239
5221111 180
5221123 60
5221128 47, 48, 49, 55
5221162 243
5221185 66
5221198 91
5221199 69
5221221 70
5221244 71
5221325 41
5221336 75
5221402 68
5221506 42
5221629 65
5221980 242
5221981 242
5222006 61
5222092 72
5222093 72
5222117 76
5222132 73
5222165 64
Part No. Page
5222420 60
5222462 74
5222506 32
5225089 24
5225092 21
5225349 34
5225361 21
5225363 23
5225392 21
5225395 47, 48, 49
5225396 51
5225397 52
5225398 53, 54
5225554 34
5225555 32
5225557 36
5225559 34
5225661 21
5225662 21
5225664 22
5225667 23
5225669 22
5225699 21
5225886 49
5225974 50
5226978 59
5226990 57
5226993 58
5227079 47, 48, 49
5227086 21
5227161 57
5227169 55
5227222 58
5227426 56
5227661 57
5227671 58
5227673 58
5227676 57
5227677 57
5227699 60
5227715 55
5227716 55
5227726 56
5227754 55
5227755 55
5227764 40
5227818 39
5227820 39
5227839 39
5228217 179
5228226 64
5228435 181
5228596 242
5228618 242
5228686 91
5228979 51
5228980 53, 54
5329444 48
5329445 49
5329446 47
5329452 51
5329456 54
Part No. Page
318
Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000
Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628
specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013
www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Part Number Index (Continued)
RF Coax Connectors
5415255 22
5415276 96
5415302 95
5415322 97
5415332 98
5415379 181
5415406 98
5415417 72
5415419 72
5415484 184
5415487 184
5415520 73
5415569 95
5415632 73
5415633 72
5415634 72
5415683 98
5415712 95
5415779 87
5415832 92
5447648 107
5448103 107
5887000 98
5887046 97
5887078 95
5887089 97
6057088 21
6057094 21
Part No. Page
5414459 72
5414460 60
5414493 87
5414553 87
5414651 86
5414666 64
5414758 87
5414907 72
5414946 178
5415006 179
5415020 76
5415024 96
5415025 62
5415046 57
5415085 86
5415103 85
5415105 72
5415187 71
5415189 60
5415205 86
5415214 96
5415216 86
5415218 57
5415226 94
5415232 21
5415242 22
5415248 23
5415252 24
Part No. Page
6057116 22
6057159 23
6057165 23
6057176 23
6059632 167
6059665 167
6061002 202
6061035 202
6061092 202
6061094 202
6274020 97
6274032 98
6274045 98
6274072 72
6274084 72
6274086 71
6274096 121
6274124 75
6274127 75
6274291 74
6274314 61
6274315 61
6274359 74
6274360 74
6274425 76
6274431 133
6274532 21
6311225 10
Part No. Page
6312079 14
6312113 9
6312121 15
6312123 19
6312124 19
6312138 15
6312139 19
6328873 10
6329818 17
6331959 9
6361137 17
6361139 19
6362765 9
6363524 11
6363525 11
6363526 11
6363527 11
6408026 10
6408027 10
6408028 9
6408030 9
6408032 10
6408033 10
6408036 11
6408037 11
6408038 10
6408399 18
Part No. Page
13126 268
13127 268
21027 268
58318 268
58433 266
58483 192
58489 192
59980 267, 268
59981 268
69477 266
69710 266
189721 266
220015 266
220220 268
220221 268
220222 268
220224 268
220241 268
307581 268
308075 268
311386 268
311392 268
Part No. Page
311395 268
311396 268
312067 268
312253 268
312317 268
354500 267
603995 267
856402 266
1055420 263
1055439 262, 263
1055440 262, 263
1055441 262, 263
1055442 263
1055443 263
1055444 263
1055445 263
1055446 263
1055447 263
1055448 263
1055449 263
1055450 263
1055451 263
Part No. Page
1055454 263
1055469 262
1055474 262
1055475 262
1055476 262
1055477 262
1055500 263
1055831 263
1055832 263
1055833 263
1055834 263
1055835 263
1055836 263
1055837 263
1055838 263
1055839 263
1055840 263
1055841 263
1055842 263
1055843 263
1213890 266
1311164 191
Part No. Page
1393488 265
1393494 265
1393524 264 , 265
1725837 266
1775231 227
M22520/36-01 268
M22520/36-02 268
M22520/36-03 268
M22520/36-04 268
M22520/36-05 268
M22520/36-06 268
M22520/36-07 268
M22520/36-08 268
M22520/36-09 268
M22520/36-10 268
M22520/36-11 268
M22520/36-12 268
M22520/36-13 268
MIL-C-22520/2-01 192
MIL-C-22520/5-01 192
Part No. Page
Tooling Part Number Index
1307191–3M–LUG–FP–3-07 Tyco Electronics Corporation
Printed in the U.S.A. www.tycoelectronics.com
Americas
For Latin/South American
Countries not shown
Phone: +54-11-4733-2015
Fax: +54-11-4733-2083
Asia/Pacific
Europe/Middle East/Africa
Argentina – Buenos Aires
Phone: +54-11-4733-2200
Fax: +54-11-4733-2211
Brasil – São Paulo
Phone: +55-11-3611-1311
Fax: +55-11-3611-0397
Canada – Toronto
Phone: +905-475-6222
Fax: +905-474-5520
Product Information Center:
(Technical Support)
Phone: +905-470-4425
Fax: +905-474-5525
Colombia – Bogota
Phone: +57-1-231-9398
Fax: +57-1-660-0206
Mexico – Mexico City
Phone: +52-55-1106-0800
+01-800-733-8926
Fax: +52-55-1106-0901
United States – Harrisburg, PA
Phone: +717-564-0100
Fax: +717-986-7575
Product Information Center:
(Technical Support)
Phone: +800-522-6752
Fax: +717-986-7575
Australia – Sydney
Phone: +61-2-9554-2600
Fax: +61-2-9502-2556
Product Information Center:
(Technical Support)
Phone: +61-2-9840-8200
Fax: +61-2-9634-6188
India – Bangalore
Phone: +91-80-285-40800
Fax: +91-80-285-40820
Indonesia – Jakarta
Phone: +65-6482-0311
Fax: +65-6482-1012
Japan – Toyko
Phone: +81-44-844-8111
Fax: +81-44-812-3207
Product Information Center:
(Technical Support)
Phone: +81-44-844-8013
Fax: +81-44-812-3200
Korea – Seoul
Phone: +82-2-3415-4500
Fax: +82-2-3486-3810
Malaysia – Kuala Lumpur
Phone: +60-3-78053055
Fax: +60-3-78053066
New Zealand – Auckland
Phone: +64-9-634-4580
Fax: +64-9-634-4586
Philippines – Makati City
Phone: +632-848-0171
Fax: +632-867-8661
People’s Republic of China
Hong Kong
Phone: +852-2735-1628
Fax: +852-2735-0243
Shanghai
Phone: +86-21-2407-1588
Fax: +86-21-2407-1599
Taiwan – Taipei
Phone: +886-2-8768-2788
Fax: +886-2-8768-2268
Singapore – Singapore
Phone: +65-6482-0311
Fax: +65-6482-1012
Thailand – Bangkok
Phone: +66-2-955-0500
Fax: +66-2-955-0505
Vietnam and Indochina –
Ho Chi Minh City
Phone: +84-8 930-5546
Fax: +84-8 930-3443
Austria – Vienna
Phone: +43-1 90 5 60-0
Fax: +43-1 90 5 60-1333
Belgium – Kessel-Lo
Phone: +32-16-35-23-00
Fax: +32-16-35-23-52
Bulgaria – Sofia
Phone: +359-2-971-2152
Fax: +359-2-971-2153
Czech Republic – Kurim
Phone: +420-5-41-162-111
Fax: +420-5-41-162-223
Denmark – Glostrup
Phone: +45-43-480-452
Fax: +45-43-441-414
Egypt – Cairo
Phone: +20-2-29 04 281
Fax: +20-2-41 92 334
Estonia – Tartu
Phone: +372-5138-274
Fax: +372-7400-779
Finland – Helsinki
Phone: +358-95-12-34-20
Fax: +358-95-12-34-250
France – Cergy-Pontoise
Phone: +33-1-3420-8888
Fax: +33-1-3420-8600
Product Information Center:
(Technical Support)
Phone: +33-1-3420-8943
Fax: +33-1-3420-8623
Germany – Bensheim
Phone: +49-6251-133-0
Fax: +49-6251-133-1600
Product Information Center:
(Technical Support)
Phone: +49-6251-133-1999
Fax: +49-6251-133-1988
Germany – Langen
Phone: +49-6103-709-0
Fax: +49-6103-709-1223
Germany – Speyer
Phone: +49-6232-30-0
Fax: +49-6232-30-2243
Germany - HTS Division – Neunkirchen
Phone: +49-2247-305-0
Fax: +49-2247-305-122
Greece – Athens
Phone: +30-210-9370-396/397
Fax: +30-210-9370-655
Hungary – Budapest
Phone: +36-1-289-1000
Fax: +36-1-289-1010
Ireland – Dublin
Phone: +353-1-820-3000
Fax: +353-1-820-9790
Israel – Yokneam
Phone: +972-4-959-0508
Fax: +972-4-959-0506
Italy – Collegno (Torino)
Phone: +39-011-4012-111
Fax: +39-011-4031116
Lithuania – Vilnius
Phone: +370-5-2131-402
Fax: +370-5-2131-403
Netherlands – ’s-Hertogenbosch
Phone: +31-73-624-62-46
Fax: +31-73-621-23-65
Product Information Center:
(Technical Support)
Phone: +31-73-6246-999
Fax: +31-73-6246-998
Norway – Nesbru
Phone: +47-66-77-8886
Fax: +47-66-77-8855
Poland – Warsaw
Phone: +48-22-45-76-700
Fax: +48-22-45-76-720
Romania – Bucharest
Phone: +40-21-311-3479/3596
Fax: +40-21-312-0574
Russia – Moscow
Phone: +7-495-926-5506/07/08/09
Fax: +7-495-926-5505
Russia – St. Petersburg
Phone: +7-812-718-8192
Fax: +7-812-718-8193
Slovenia – Ljubljana
Phone: +386-1561-3270
Fax: +386-1561-3240
South Africa – Port Elizabeth
Phone: +2741-503-4500
Fax: +2741-581-0440
Spain – Barcelona
Phone: +34-93-291-0330
Fax: +34-93-201-7879
Product Information Center:
(Technical Support):
Phone: +34-93-291-0330
Fax: +34-93-200-3779
Sweden – Upplands Väsby
Phone: +46-8-50-72-50-00
Fax: +46-8-50-72-50-01
Switzerland – Steinach
Phone: +41-71-447-0447
Fax: +41-71-447-0444
Turkey – Istanbul
Phone: +90-212-281-8181/2/3
Fax: +90-212-281-8184
Ukraine – Kiev
Phone: +380-044-206-2265
Fax: +380-044-206-2264
United Kingdom – Swindon
Phone: +44-8706-080-208
Fax: +44-1793-572-109
Product Information Center:
(Technical Support)
Freephone GB: 0800-267-666
Phone: +44-208-420-8341 or 8343
+44-208-420-8081
For Middle East/African Countries
Not Shown
Phone: +33-1-3420-8866
Fax: +33-1-3420-8300
Global Contacts
Tyco Electronics Corporation
Harrisburg, Pennsylvania
1307191 Revised 3-07 3M-LUG-FP
tycoelectronics.com
