FT Series The FT series Super Capacitors are ideal as short-time (30 minutes max.) backup devices in small and lightweight systems. 5.5 VDC (0.10 F to 5.6 F) Features * Wide operating temperature range: -40C to 85C * High reliability Cload life of 85C, 5.5V, 1000 hours guaranteed * Ideal for supplying current of several hundred A to several mA for short time Applications * Backup source for microcomputers and buffer for momentary high-current loads (for example, motors) Part Number System FT 0H 473 Z F Environmental Impact Reduced Product Capacitance tolerance: +80%, -20% Capacitance: 0.047 F First two digits represent significant figures. Third digit specifies number of zeros to follow microfarad code. Maximum rated voltage 0H: 5.5 VDC Super Capacitor: FT series Super Capacitors Vol.03 45 Markings Marking of sleeve Sleeve Super Capacitor K1 Date code Lead terminal connected to the metal can case 001 FT 5.5V K1 85C 0.22F FT 5.5V 85C 0.22F Negative polarity identification mark - Negative polarity 0.3 Min. H Max. rMin. Dimensions Dimensions mm (inch) Part No. Sleeve FT0H104ZF FT0H224ZF P 0.5 FT0H474ZF D 0.5 FT0H105ZF d 1 0.1 FT0H225ZF FT0H335ZF FT0H565ZF d 2 0.1 H P d1 d2 11.5 (0.453) 14.5 (0.57) 16.5 (0.65) 21.5 (0.85) 28.5 (1.12) 36.5 (1.44) 44.5 (1.75) 8.5 (0.335) 12.0 (0.47) 13.0 (0.512) 13.0 (0.512) 14.0 (0.55) 15.0 (0.588) 17.0 (0.67) 5.08 (0.2) 5.08 (0.2) 5.08 (0.2) 7.62 (0.3) 10.16 (0.4) 15.00 (0.59) 20.00 (0.79) 0.4 (0.016) 0.4 (0.016) 0.4 (0.016) 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) 1.0 (0.039) 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 1.4 (0.055) 1.7 (0.067) 1.4 (0.055) r Weight (g) (oz) 1.6 2.7 (0.106) (0.057) 4.1 2.2 (0.087) (0.145) 2.7 5.3 (0.106) (0.187) 3.0 10.0 (0.118) (0.353) 6.1 18.0 (0.240) (0.635) 6.1 38.0 (0.240) (1.34) 72.0 6.1 (0.240) (2.54) Note: Weight is typical. Lead Lead (case) D - Negative polarity Standard Ratings Nominal Capacitance Charge System Discharge System (F) (F) Max. ESR (at 1 kHz) () Max. Current at 30 minutes ( mA ) Part Number Max. Rated Voltage (V) FT0H104ZF 5.5 0.10 0.14 less than 16 less than 0.15 FT0H224ZF 5.5 0.22 0.28 less than 10 less than 0.33 FT0H474ZF 5.5 0.47 0.60 less than 6.5 less than 0.71 FT0H105ZF 5.5 1.0 1.3 less than 3.5 less than 1.5 FT0H225ZF 5.5 2.2 2.8 less than 1.8 less than 3.3 FT0H335ZF 5.5 3.3 4.2 less than 1.0 less than 5.0 FT0H565ZF 5.5 5.6 7.2 less than 0.6 less than 8.4 46 Super Capacitors Vol.03 Specifications: FT Series Test Conditions Item Specifications Conforming to JIS C 5102-1994 Operating Temperature Range -40C to +85C Maximum Operating Voltage 5.5 Vdc Nominal Capacitance Range Refer to standard ratings Capacitance Allowance +80 %, -20 % Refer to characteristics measuring conditions Equivalent Series Resistance Refer to standard ratings Refer to characteristics measuring conditions Current (30-minute value) Refer to standard ratings Refer to characteristics measuring conditions Capacitance Surge Voltage Equivalent Series Resistance Not to exceed 120 % of initial requirement Phase 2 Temperature Variation of Characteristics More than 90 % of initial requirement Phase 3 Phase 5 Phase 6 Current at 30 minutes Not to exceed 120 % of initial requirement Capacitance More than 50 % of initial value Vibration Resistance Solderability Phase 1: +25 2C Capacitance Phase 2: -25 2C Temperature Cycle Humidity Resistance High temperature Load More than 30 % of initial value Equivalent Series Resistance Not to exceed 7 times initial value Phase 3: -40 2C Capacitance Phase 4: +25 2C Not to exceed 150 % of initial value Equivalent Series Resistance Not to exceed initial requirement Phase 5: +85 2C Current at 30 minutes Not to exceed 1.5 CV (mA) Phase 6: +25 2C C/C Within 20 % of initial value Equivalent Series Resistance Not to exceed initial requirement Not to exceed initial requirement No loosening nor permanent damage of the leads Conforms to 8.1.2(1) 0.022 to 0.47 F: 1 kg, 10 sec. 1 F: 2.5 kg, 10 sec. Capacitance Conforms to 8.2.3 Meet initial requirement Equivalent Series Resistance Meet initial requirement Frequency: Current at 30 minutes Test duration: 6 hours Meet initial requirement 3/4 or more of the pin surface should be covered with new solder Capacitance Soldering Heat Resistance Conforms to 7.12 Equivalent Series Resistance Not to exceed 3 times initial value Current at 30 minutes Lead Strength (Tensile) Conforms to 7.14 At 85C Surge voltage 6.3 V Charge: 30 sec. Discharge: 9 min. 30 sec. 1000 cycles Charge resistance: 0.10 F 150 0.22 F 56 0.47 F 30 1.0 F 15 2.2 F 10 3.3 F 10 5.6 F 10 Discharge resistance: Not applicable (0 ) Meet initial requirement Equivalent Series Resistance Meet initial requirement Current at 30 minutes Meet initial requirement Capacitance Meet initial requirement 10 to 55 Hz Conforms to 8.4 245 5C 5 0.5 sec. 1.6 mm from body Conforms to 8.5 260 10C, 10 1 sec. Immersion depth: 1.6 mm from body Current at 30 minutes Meet initial requirement Conforms to 9.3 Temperatuve condition: -40C Normai temperature +85C Normai temperature Number of cycles : 5 cycles Capacitance Within 20% of initial value Conforms to 9.5 Equivalent Series Resistance Meet initial requirement Equivalent Series Resistance Not to exceed120 % of initial requirement 40 2C, 90 to 95% RH Current at 30 minutes Not to exceed120 % of initial requirement 240 8 hours Capacitance change Within 30% of initial value Conforms to 9.10 Temperature: 85 2C Series resistance: 0 Applied voltage: 5.5 VDC Time of test: 1000 +48 - 0 hours Equivalent Series Resistance Not to exceed 200% of initial requirement Current at 30 minutes Not to exceed 200% of initial requirement Super Capacitors Vol.03 47