Super Capacitors Vol.03 45
FT 0H 473 Z F Environmental Impact Reduced Product
Capacitance tolerance: +80%, –20%
Capacitance: 0.047 F
First two digits represent significant figures.
Third digit specifies number of zeros to follow microfarad code.
Maximum rated voltage
0H: 5.5 VDC
Super Capacitor: FT series
FT Series
The FT series Super Capacitors are ideal as short-time (30 minutes max.) backup devices in small and lightweight
systems. 5.5 VDC (0.10 F to 5.6 F)
Features
• Wide operating temperature range: –40˚C to 85˚C
• High reliability Cload life of 85˚C, 5.5V, 1000 hours guaranteed
• Ideal for supplying current of several hundred
μ
A to several mA for short time
Applications
• Backup source for microcomputers and buffer for momentary high-current loads (for example, motors)
Part Number System
46 Super Capacitors Vol.03
Markings
Dimensions
P±0.5
D±0.5
φ
0.3 Min.
H Max.
d1±0.1
d2±0.1
rMin.
Sleeve
Lead (case)
Negative polarity
Lead
Note: Weight is typical.
Sleeve
Lead terminal
connected to the
metal can case
Negative polarity
Negative polarity
identification mark
Marking of sleeve
Super Capacitor
Date code
K1
5.5V
K1
001 FT
0.22F
5.5VFT
85˚C 85˚C
0.22F
Part No. Dimensions mm (inch)
DHP r
d1
Weight
(g)
(oz)
d2
11.5
(0.453)
14.5
(0.57)
16.5
(0.65)
21.5
(0.85)
28.5
(1.12)
36.5
(1.44)
44.5
(1.75)
8.5
(0.335)
12.0
(0.47)
13.0
(0.512)
13.0
(0.512)
14.0
(0.55)
15.0
(0.588)
17.0
(0.67)
5.08
(0.2)
5.08
(0.2)
5.08
(0.2)
7.62
(0.3)
10.16
(0.4)
15.00
(0.59)
20.00
(0.79)
0.4
(0.016)
0.4
(0.016)
0.4
(0.016)
0.6
(0.024)
0.6
(0.024)
0.6
(0.024)
1.0
(0.039)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.2
(0.047)
1.4
(0.055)
1.7
(0.067)
1.4
(0.055)
2.7
(0.106)
2.2
(0.087)
2.7
(0.106)
3.0
(0.118)
6.1
(0.240)
6.1
(0.240)
6.1
(0.240)
1.6
(0.057)
4.1
(0.145)
5.3
(0.187)
10.0
(0.353)
18.0
(0.635)
38.0
(1.34)
72.0
(2.54)
FT0H104ZF
FT0H224ZF
FT0H474ZF
FT0H105ZF
FT0H225ZF
FT0H335ZF
FT0H565ZF
Part Number Max.
Rated Voltage
( V )
5.5
5.5
5.5
5.5
5.5
5.5
5.5
0.10
0.22
0.47
1.0
2.2
3.3
5.6
0.14
0.28
0.60
1.3
2.8
4.2
7.2
Max. ESR
(at 1 kHz)
( Ω )
Max. Current at
30 minutes
( mA )
Nominal Capacitance
Charge System
( F )
Discharge System
( F )
FT0H104ZF
FT0H224ZF
FT0H474ZF
FT0H105ZF
FT0H225ZF
FT0H335ZF
FT0H565ZF
0.15
0.33
0.71
1.5
3.3
5.0
8.4
16
10
6.5
3.5
1.8
1.0
0.6
less than
less than
less than
less than
less than
less than
less than
less than
less than
less than
less than
less than
less than
less than
Standard Ratings
Super Capacitors Vol.03 47
Specifications: FT Series
Item
Operating Temperature Range
Maximum Operating Voltage
Nominal Capacitance Range
Capacitance Allowance
Equivalent Series Resistance
Current (30-minute value)
Surge Voltage
Phase 2
Phase 3
Phase 5
Phase 6
Lead Strength (Tensile)
Vibration Resistance
Solderability
Soldering Heat
Resistance
Temperature Cycle
Humidity Resistance
High temperature Load
Specifications
–40˚C to +85˚C
5.5 Vdc
Refer to standard ratings
+80 %, –20 %
Refer to standard ratings
Refer to standard ratings
Capacitance More than 90 % of initial requirement
Equivalent Series Resistance
Not to exceed 120 % of initial requirement
Current at 30 minutes
Not to exceed 120 % of initial requirement
Capacitance More than 50 % of initial value
Equivalent Series Resistance
Not to exceed 3 times initial value
Capacitance More than 30 % of initial value
Equivalent Series Resistance
Not to exceed 7 times initial value
Capacitance Not to exceed 150 % of initial value
Equivalent Series Resistance
Not to exceed initial requirement
Current at 30 minutes
Not to exceed 1.5 CV (mA)
ΔC/C Within ±20 % of initial value
Equivalent Series Resistance
Not to exceed initial requirement
Current at 30 minutes
Not to exceed initial requirement
No loosening nor permanent damage of the leads
Capacitance Meet initial requirement
Equivalent Series Resistance
Meet initial requirement
Current at 30 minutes
Meet initial requirement
3/4 or more of the pin surface should b e covered with new solder
Capacitance Meet initial requirement
Equivalent Series Resistance
Meet initial requirement
Current at 30 minutes
Meet initial requirement
Capacitance Meet initial requirement
Equivalent Series Resistance
Meet initial requirement
Current at 30 minutes
Meet initial requirement
Capacitance Within ±20% of initial value
Equivalent Series Resistance
Not to exceed120 % of initial requirement
Current at 30 minutes
Not to exceed120 % of initial requirement
Capacitance change Within ±30% of initial value
Equivalent Series Resistance
Not to exceed 200% of initial requirement
Current at 30 minutes
Not to exceed 200% of initial requirement
Test Conditions
Conforming to JIS C 5102-1994
Refer to characteristics measuring conditions
Refer to characteristics measuring conditions
Refer to characteristics measuring conditions
Conforms to 7.12
Phase 1: +25±2˚C
Phase 2: –25±2˚C
Phase 3: –40±2˚C
Phase 4: +25±2˚C
Phase 5: +85±2˚C
Phase 6: +25±2˚C
Conforms to 8.1.2(1)
0.022 to 0.47 F: 1 kg, 10 sec.
1 F: 2.5 kg, 10 sec.
Conforms to 8.2.3
Frequency: 10 to 55 Hz
Test duration: 6 hours
Conforms to 8.4
245 ±5˚C
5 ±0.5 sec. 1.6 mm from body
Conforms to 8.5
260 ±10˚C, 10 ±1 sec.
Immersion depth:
1.6 mm from body
Conforms to 9.3
Temperatuve condition:
–40˚C Normai temperature
+85˚C Normai temperature
Number of cycles : 5 cycles
Conforms to 9.5
40 ±2˚C, 90 to 95% RH
240 ± 8 hours
Conforms to 9.10
Temperature: 85 ± 2°C
Series resistance: 0 Ω
Applied voltage: 5.5 VDC
Time of test: 1000 hours
Temperature
Variation of
Characteristics
+48
–0
Conforms to 7.14
At 85˚C Surge voltage 6.3 V
Charge: 30 sec.
Discharge: 9 min. 30 sec.
1000 cycles
Charge resistance:
0.10 F 150 Ω
0.22 F 56 Ω
0.47 F 30 Ω
1.0 F 15 Ω
2.2 F 10 Ω
3.3 F 10 Ω
5.6 F 10 Ω
Discharge resistance:
Not applicable (0 Ω)