Single-In-Line Conformal Coated Diode Array D Series * * * 4 to 14 Leads Standard and custom circuits Space saving design Not Recommended for New Designs Specification Reverse Voltage, VR 80V Reverse Current, IR 1.0A (VR = 70V) Forward Current, IF 100mA Average, 300mA Surge (1s Max.) Forward Voltage, VF 1.2V @ IF = 100mA Package Power, PPKG 200mW @ 25oC Reverse Recovery Time, trr Capacitance, C Storage Temperature Range Operating Temperature Range 4ns (VR = 6V, IF = 5mA, RL = 50) 5.5pF (VR = 6V, f = 1MHz) - 55C to 125C - 25C to 80C General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 02.14 Single-In-Line Conformal Coated Diode Array D Series Specification Circuit Type Polarity "A" Polarity "C" 1 N = 4 to 14 2 N = 3 to 13 (Odd #) 3 N = 4 to 14 (Even #) 5 N = 4 to 14 General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 02.14 Single-In-Line Conformal Coated Diode Array D Series Outline Dimensions (Inch/mm) Typical Part Marking General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 02.14 Single-In-Line Conformal Coated Diode Array D Series Ordering Information D 8-3 C Model Number of pins: 4 to 14 Circuit type: 1 = Bussed with pin 1 in common. 2 = Bussed with centered common. 3 = Isolated. 5 = Dual termination. Polartity (see schematic) A = Common Anode ( circuit 1, circuit 2) Annode is at pin number 1 (circuit 3, circuit 5) C = Common Cathode (circuit 1, circuit 2) Cathode is at pin number 1 (circuit 3, circuit 5) Material Part Substrate Diode Termination Lead Pins Junction and Lead Pin finish Conformal Coat Material Alumina ceramic Small mold package silicon expitaxial planar diode array 100% Ag 100% Sn Plated steel 96%Sn, 3.5%Ag, 0.5%Cu Expoxy resin, UL-94 V-0 rated Packaging All sizes of D series product are packed in boxes of 200 pieces. General Note TT electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT electronics' own data and is considered accurate at time of going to print. www.bitechnologies.com www.irctt.com www.welwyn-tt.com (c) TT electronics plc 02.14