857286 358.4 MHz SAW Filter RFMD + TriQuint = Qorvo Applications * Base Station Infrastructure * LTE Macrocells * General Purpose Wireless SMP-28B 7.01 x 5.51 x 1.63 mm Product Features * * * * * * * * Functional Block Diagram Usable bandwidth of 60 MHz Balanced operation High Attenuation Low loss Ceramic Surface Mount Package (SMP) Small Size: 7.01 x 5.51 x 1.63 mm Hermetically Sealed Pb RoHS Compliant, Pb-free 9 8 7 10 6 11 5 12 4 1 2 3 Top View General Description Pin Configuration The 857286 is a high-performance Surface Acoustic Wave (SAW) filter with a center frequency of 358.4 MHz and a 1 dB bandwidth of 60 MHz. The 857286 uses common module packaging techniques to achieve the industry standard 7.01 x 5.51 x 1.63 mm footprint. It features low loss with excellent attenuation, and is designed to be used with a balanced input and output. Pin No. Label 10 12 4 6 1,2,3,5 7,8,9,11 input Input return Output Output Return Case Ground Case Ground This device is RoHS compliant and Pb-free. Ordering Information Part No. Description 857286 857286-EVB Packaged Part Evaluation board Standard T/R size = 3,000 units/reel Data Sheet: Rev. C 06-05-15 (c) 2015 TriQuint - 1 of 6 - Disclaimer: Subject to change without notice www.triquint.com 857286 358.4 MHz SAW Filter RFMD + TriQuint = Qorvo Electrical Specifications (1) (3) Test conditions unless otherwise noted: Parameter Center Frequency Insertion Loss (4) Amplitude Variation Absolute Group Delay (4) Group Delay Variation EVM (5) IIIP3 (6) Time side-lobe response attn. Attenuation (7) Input Return Loss Output Return Loss (8) Source Impedance (8) Load Impedance (2) Temperature Range - 33 to +105 C Conditions (max over 328.4 - 388.4 MHz) 328.4 - 388.4 MHz ( average over 328.4 - 388.4 MHz 328.4 - 388.4 MHz Over any 3.84 MHz span within 328.4 - 388.4 MHz Tone spacing 0.8 - 5 MHz Tone spacing 5 - 30 MHz (1.0 - 500 s) 40.0 - 110.0 MHz 208.72 - 222.8 MHz 222.8 - 282.8 MHz 454.48 - 468.56 MHz 468.56 - 528.56 MHz 574.16 - 634.16 MHz 328.4 - 388.4 MHz 328.4 - 388.4 MHz Balanced Balanced Min Typ at 25oC Max Units - 358.4 10.5 0.72 280 26.8 12.8 1.2 350 60 MHz dB dB p-p ns ns p-p - 2.48 3.5 % 40 45 32 50 40 35 45 50 55 9.5 9.5 - 43 50 38.4 70 53 47 56 60 71 12.7 11.3 200 50 - dBm dB dB dB dB Notes: 1. All specifications are based on the test circuit shown on page 3. 2. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over temperature. 3. Electrical margin has been built into the design to account for the variations due to manufacturing tolerances. 4. Variation is defined as the total peak to peak variation over the defined frequency range. 5. Measured a RRC filtered QPSK modulated signal. 6. Tone spacing 0.8 MHz to 30 MHz. Power < 5 dBm per tone. Only measured during engineering development. 7. Relative to Insertion loss. 8. This is the optimum impedance in order to achieve the performance shown. Data Sheet: Rev. C 06-05-15 (c) 2015 TriQuint - 2 of 6 - Disclaimer: Subject to change without notice www.triquint.com 857286 358.4 MHz SAW Filter RFMD + TriQuint = Qorvo Evaluation Board 13 nH 56 nH 960686 10 L1 6 L5 C1 L3 TriQuint 857286 JJJYHHM C2 L4 200 L2 30 nH 0.5 pF 47 nH L6 56 nH 1,2,3,5 12 7,8,9,11 4 12 pF 50 13 nH Notes: 1. Top, middle & bottom layers: 1 oz copper. Substrates: FR4 dielecric .031" thick. Finish plating: Nickel: 3-8 m thick, Gold: 0.030.2 m thick. Hole plating: Copper min .0008 m thick. Bill of Material Reference Des. Value Description Manuf. L1 L2 L3 L4 L5 L6 C1 C2 SMA PCB 56 nH 56 nH 47 nH 30 nH 13 nH 13 nH 0.5 pF 12 pF N/A N/A Wire wound ,0603, 5 % Wire wound ,0603, 5 % Wire wound ,0603, 5 % Wire wound ,0603, 5 % Wire wound, 0603, 5 % Wire wound ,0603, 5 % Chip Ceramic cap, 0603, 5 % Chip Ceramic cap, 0603, 2 % SMA connector 3-layer MuRata MuRata MuRata MuRata MuRata MuRata MuRata MuRata Johnson Components Multiple Part Number LQW18AN56NJ00 LQW18AN56NJ00 LQW18AN47NJ00 LQW18AN30NJ00 LQW18AN13NJ10 LQW18AN13NJ10 GRM1885C1HR50CZ01 GRM1885C1H120JA01 142-0701-801 960686 PCB Mounting Pattern 1.34 .28 .99 1.34 .28 5.71 Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. This drawing specifies the mounting pattern used on the TriQuint evaluation board for this product. Some modification may be necessary to suit end user assembly materials and processes. .99 7.21 Absolute Maximum Ratings Parameter Rating Storage Temperature - 40 to + 85 C Operating Temperature Input power, in band, CW, 24 hours @ 50 C - 33 to + 105 C (1) Input power, out of band, CW, 24 hours @ 50 C Data Sheet: Rev. C 06-05-15 (c) 2015 TriQuint 1. Operation of this device outside the parameter ranges given may cause permanent damage. + 19 dBm (1) + 25 dBm - 3 of 6 - Disclaimer: Subject to change without notice www.triquint.com 857286 358.4 MHz SAW Filter RFMD + TriQuint = Qorvo Performance Plots Test conditions unless otherwise noted: Temp.= +25 C Frequency Response Passband Response 0 -10 -20 -11 -40 d B d B -12 -60 -13 -80 -100 208.4 283.4 358.4 433.4 -14 298.4 508.4 328.4 358.4 Frequency (MHz) 388.4 418.4 Frequency (MHz) Wideband Response Group Delay Response 60 0 -20 30 n s e c -40 d B -60 0 -30 -80 -100 10 260 510 760 1010 -60 313.4 328.4 343.4 Input Smith Chart Output Smith Chart 1 1 0.8 0.8 0.6 0.6 0.4 0.4 0.2 0.2 -0 .5 Data Sheet: Rev. C 06-05-15 (c) 2015 TriQuint 373.4 Frequency (MHz) 0 -1 358.4 Frequency (MHz) 388.4 403.4 0 0 0.5 1 -1 -0 .5 0 -0 .2 -0 .2 -0 .4 -0 .4 -0 .6 -0 .6 -0 .8 -0 .8 -1 -1 - 4 of 6 - 0.5 1 Disclaimer: Subject to change without notice www.triquint.com 857286 358.4 MHz SAW Filter RFMD + TriQuint = Qorvo Package Information, Marking and Dimensions Package Style: SMP-28B Dimensions: 7.01 x 5.51 x 1.63 mm TriQuint 857286 JJJYHHM ID dot Date code 0.76 1.63 NOM. 1.78 MAX. Body: Al2O3 ceramic Lid: Kovar, Ni plating Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating The date code consists of: The day of the year - Julian (3 digits), Y= last digit of the year - (1 digit), HH = the hour of the day - Military (2 digits) Notes: 1. All dimensions shown are typical in millimeters 2. All tolerances are 0.15mm, except overall length and width 0.10mm 3. An asterisk (*) in front of the marking code indicates prototype. 7.01 1.27 1.70 1.27 5.51 0.79 1.14 Tape and Reel information Standard T/R size = 3000 units / reel. All dimensions are in millimeters 2.7 16.8 ID dot O330 4.0 0.3 O102 2.0 O1.5 A 7.5 Direction of travel O20.2 O13.0 1.75 7.3 2.0 2.2 5.8 8.0 O1.5 16.0 A Section A-A Data Sheet: Rev. C 06-05-15 (c) 2015 TriQuint - 5 of 6 - Disclaimer: Subject to change without notice www.triquint.com 857286 358.4 MHz SAW Filter RFMD + TriQuint = Qorvo Product Compliance Information ESD Sensitivity Ratings Caution! ESD-Sensitive Device ESD Rating: Value: Test: Standard: Class :1A Passes : 300 V Human Body Model (HBM) JEDEC Standard JESD22-A114 MSL Rating Not applicable. Hermetic package. Solderability Compatible with both lead-free (260 C maximum reflow temperature) and tin/lead (245 C maximum reflow temperature) soldering processes. Refer to Soldering Profile for recommended guidelines. RoHs Compliance This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). This product also has the following attributes: * Lead Free * Halogen Free (Chlorine, Bromine) * Antimony Free * TBBP-A (C15H12Br402) Free * PFOS Free * SVHC Free Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: customer.support@qorvo.com Tel: 877 -800-8584 For information about the merger of RFMD and TriQuint as Qorvo: Web: www.qorvo.com For technical questions and application information: Email: flapplication.engineering@tqs.com Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contained herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or lifesustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Data Sheet: Rev. C 06-05-15 (c) 2015 TriQuint - 6 of 6 - Disclaimer: Subject to change without notice www.triquint.com