857286
358.4 MHz SAW Filter
Data Sheet: Rev. C 06-05-15
- 1 of 6 -
Disclaimer: Subject to change without notice
© 2015 TriQuint www.triquint.com
RFMD + TriQuint = Qorvo
Applications
Base Station Infrastructure
LTE Macrocells
General Purpose Wireless
Product Features
Usable bandwidth of 60 MHz
Balanced operation
High Attenuation
Low loss
Ceramic Surface Mount Package (SMP)
Small Size: 7.01x5.51x1.63 mm
Hermetically Sealed
RoHS Compliant, Pb-free
SMP-28B 7.01x5.51x1.63 mm
Functional Block Diagram
12
11
10
4
5
6
8
97
3
2
1
Top View
Pin Configuration
Pin No. Label
10 input
12 Input return
4 Output
6 Output Return
1,2,3,5 Case Ground
7,8,9,11 Case Ground
General Description
The 857286 is a high-
performance Surface Acoustic
Wave (SAW) filter with a center frequency of 358.4 MHz
and a 1 dB bandwidth of 60 MHz.
The 857286 uses common module packaging
techniques to achieve the industry standard
7.01x5.51x1.63 mm footprint.
It features low loss with
excellent attenuation, and is designed to be used with a
balanced input and output.
This device is RoHS compliant and Pb-free.
Ordering Information
Part No. Description
857286 Packaged Part
857286-EVB Evaluation board
Standard T/R size = 3,000 units/reel
Pb
857286
358.4 MHz SAW Filter
Data Sheet: Rev. C 06-05-15
-
2 of 6
-
Disclaimer: Subject to change without notice
© 2015 TriQuint www.triquint.com
RFMD + TriQuint = Qorvo
Electrical Specifications
Test conditions unless otherwise noted:
(2)
Temperature Range - 33 to +105
°C
Parameter Conditions Min Typ at 25
o
C
Max Units
Center Frequency - 358.4 - MHz
Insertion Loss
(max over 328.4 – 388.4 MHz) - 10.5 12.8 dB
Amplitude Variation
(
4
)
328.4 – 388.4 MHz - 0.72 1.2 dBp-p
Absolute Group Delay ( average over 328.4 – 388.4 MHz - 280 350 ns
Group Delay Variation
(
4
)
328.4 – 388.4 MHz - 26.8 60 nsp-p
EVM
(5)
Over any 3.84 MHz span within
328.4
388.4 MHz
- 2.48 3.5 %
IIIP3
(6)
Tone spacing 0.8 – 5 MHz
Tone spacing 5 – 30 MHz
40
45
43
50
-
- dBm
Time side-lobe response attn. (1.0 – 500 µs) 32 38.4 - dB
Attenuation
(7)
40.0 – 110.0 MHz
208.72 – 222.8 MHz
222.8 – 282.8 MHz
454.48 – 468.56 MHz
468.56 – 528.56 MHz
574.16 – 634.16 MHz
50
40
35
45
50
55
70
53
47
56
60
71
-
-
-
-
-
-
dB
Input Return Loss 328.4 – 388.4 MHz 9.5 12.7 - dB
Output Return Loss 328.4 – 388.4 MHz 9.5 11.3 - dB
Source Impedance
(
8
)
Balanced - 200 - Ω
Load Impedance
(
8
)
Balanced - 50 - Ω
Notes:
1. All specifications are based on the test circuit shown on page 3.
2. In production, devices will be tested at room temperature to a guard-banded specification to ensure electrical compliance over
temperature.
3. Electrical margin has been built into the design to account for the variations due to manufacturing tolerances.
4. Variation is defined as the total peak to peak variation over the defined frequency range.
5. Measured a RRC filtered QPSK modulated signal.
6. Tone spacing 0.8 MHz to 30 MHz. Power < 5 dBm per tone. Only measured during engineering development.
7. Relative to Insertion loss.
8. This is the optimum impedance in order to achieve the performance shown.
857286
358.4 MHz SAW Filter
Data Sheet: Rev. C 06-05-15
-
3 of 6
-
Disclaimer: Subject to change without notice
© 2015 TriQuint www.triquint.com
RFMD + TriQuint = Qorvo
Evaluation Board
857286
TriQuint
JJJYHHM
L2
960686
L4
L1
C1 L3
L5
L6
C2
1,2,3,5
7,8,9,11
200
56
10 6
50
56 12 4
30
0.5 47
nH
nH
pF nH nH
13 nH
13nH
12pF
Notes:
1. Top, middle & bottom layers: 1 oz copper. Substrates: FR4 dielecric .031” thick. Finish plating: Nickel: 3-8 µm thick, Gold: 0.03-
0.2 µm thick. Hole plating: Copper min .0008 µm thick.
Bill of Material
Reference Des. Value Description Manuf. Part Number
L1 56nH Wire wound ,0603, ±5% MuRata LQW18AN56NJ00
L2 56nH Wire wound ,0603, ±5% MuRata LQW18AN56NJ00
L3 47nH Wire wound ,0603, ±5% MuRata LQW18AN47NJ00
L4 30nH Wire wound ,0603, ±5% MuRata LQW18AN30NJ00
L5 13nH Wire wound, 0603, ±5% MuRata LQW18AN13NJ10
L6 13nH Wire wound ,0603, ±5% MuRata LQW18AN13NJ10
C1 0.5pF Chip Ceramic cap, 0603, ±5%
MuRata GRM1885C1HR50CZ01
C2 12pF Chip Ceramic cap, 0603, ±2%
MuRata GRM1885C1H120JA01
SMA N/A SMA connector Johnson Components 142-0701-801
PCB N/A 3-layer Multiple 960686
PCB Mounting Pattern
5.71
.99
7.21
1.34
1.34
.99 .28
.28
Notes:
1. All dimensions are in millimeters. Angles are in degrees.
2.
This drawing specifies the mounting pattern used on the TriQuint evaluation
board for this product. Some modification may be necessary to suit end
user assembly materials and processes.
Absolute Maximum Ratings
Parameter Rating
1. Operation of this device outside the parameter
ranges given may cause permanent damage.
Storage Temperature -
  
40 to +
85
°C
Operating Temperature -
  
33 to +
105 °C
Input power, in band, CW, 24 hours @ 50
°C
(
1
)
+
19
dBm
Input power, out of band, CW, 24 hours @ 50
°C
(
1
)
+
25
dBm
857286
358.4 MHz SAW Filter
Data Sheet: Rev. C 06-05-15
-
4 of 6
-
Disclaimer: Subject to change without notice
© 2015 TriQuint www.triquint.com
RFMD + TriQuint = Qorvo
Performance Plots
Test conditions unless otherwise noted:
Temp.= +25
°C
Frequency Response
d
B
Frequency (MHz)
-100
-80
-60
-40
-20
0
208.4 283.4 358.4 433.4 508.4
Passband Response
d
B
Frequency (MHz)
-14
-13
-12
-11
-10
298.4 328.4 358.4 388.4 418.4
Wideband Response
d
B
Frequency (MHz)
-100
-80
-60
-40
-20
0
10 260 510 760 1010
Group Delay Response
n
s
e
c
Frequency (MHz)
-60
-30
0
30
60
313.4 328.4 343.4 358.4 373.4 388.4 403.4
Input Smith Chart
-1
-0 .8
-0 .6
-0 .4
-0 .2
0
0.2
0.4
0.6
0.8
1
-1 -0 .5 0 0.5 1
Output Smith Chart
-1
-0 .8
-0 .6
-0 .4
-0 .2
0
0.2
0.4
0.6
0.8
1
-1 -0 .5 0 0.5 1
857286
358.4 MHz SAW Filter
Data Sheet: Rev. C 06-05-15
-
5 of 6
-
Disclaimer: Subject to change without notice
© 2015 TriQuint www.triquint.com
RFMD + TriQuint = Qorvo
Package Information, Marking and Dimensions
1.63 NOM.
1.78 MAX.
5.51
0.76
1.14
1.27
1.70
0.79
1.27
7.01
Date code
857286
TriQuint
ID dot
JJJYHHM
Package Style: SMP-28B
Dimensions: 7.01 x 5.51 x 1.63 mm
Body:
Al
2
O
3
ceramic
Lid:
Kovar
,
Ni
plating
Terminations:
Au
plating 0.5 - 1.0
μ
m, over a 2-6
μ
m
Ni
plating
The date code consists of:
The day of the year – Julian (3 digits), Y= last digit of the year -
(1 digit),
HH = the hour of the day – Military (2 digits)
Notes:
1. All dimensions shown are typical in millimeters
2. All tolerances are ±0.15mm, except overall length and width
±0.10mm
3. An asterisk (*) in front of the marking code indicates prototype.
Tape and Reel information
Standard T/R size = 3000 units
/
reel. All dimensions are in millimeters
ID dot
2.0
Ø13.0
Ø20.2
Ø330
16.8
2.7
Direction of travel
Ø102
Section A-A
0.3
2.2
7.3
5.8
Ø1.5
8.0
4.0
2.0
A
A
Ø1.5
16.0
7.5
1.75
857286
358.4 MHz SAW Filter
Data Sheet: Rev. C 06-05-15
-
6 of 6
-
Disclaimer: Subject to change without notice
© 2015 TriQuint www.triquint.com
RFMD + TriQuint = Qorvo
Product Compliance Information
ESD Sensitivity Ratings
Caution! ESD-Sensitive Device
ESD Rating: Class :1A
Value:
Passes : 300 V
Test: Human Body Model (HBM)
Standard: JEDEC Standard JESD22-A114
Solderability
Compatible with both lead-free (260
°C maximum reflow
temperature) and tin/lead (245
°C maximum reflow
temperature) soldering processes.
Refer to Soldering Profile for recommended guidelines.
RoHs Compliance
This part is
compliant with EU 2002/95/EC RoHS directive
(Restrictions on the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment).
This product also has the following attributes:
Lead Free
Halogen Free (Chlorine, Bromine)
Antimony Free
TBBP-A (C
15
H
12
Br
4
0
2
) Free
PFOS Free
SVHC Free
MSL Rating
Not applicable. Hermetic package.
Contact Information
For the latest specifications, additional product information
, worldwide sales and distribution locations, and information
about TriQuint:
Web: www.triquint.com Tel: 877 -800-8584
Email: customer.support@qorvo.com
For information about the merger of RFMD and TriQuint as Qorvo:
Web: www.qorvo.com
For technical questions and application information: Email: flapplication.engineering@tqs.com
Important Notice
The information contained herein is believed to be reliable.
TriQuint makes no warranties regarding the information
contained herein. TriQuint assumes no responsibility or l
iability whatsoever for any of the information contained
herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein.
The
information contained herein is provided "AS IS, WHERE IS" and with all fault
s, and the entire risk associated with
such information is entirely with the user.
All information contained herein is subject to change without notice.
Customers should obtain and verify the latest relevant information before placing orders for TriQuint
products. The
information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any
patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or
anything described by such information.
TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-
sustaining applications, or other applications where a failure would reasonably be expected to cause se
vere personal
injury or death.