Product Arduino MBED About
ioShield-A Home ioShield-A
Tweet Like Plus one Pin It Share
Please Share This
ioShield-A
ioShield-A allows an Arduino board to connect to the Internet.
It is based on the WIZ550io network module which uses WIZnet W5500 ethernet chip.
The WIZnet W5500 provides a network (TCP/IP) stack capable of both TCP and UDP. It
supports up to eight simultaneous socket connections. And, when Powered on and
nRESET triggered, WIZ550io initializes itself with embedded real MAC and default IP
address and can be pinged from user’s computer.
As ioShield uses W5500 chipset, instead of W5100 which was used before in the
Arduino Ethernet Shield, users needs to use WIZnet W5500 Ethernet Library.
Overview
WIZnet Wiki
WIZnet Wiki
WIZnet Forum
WIZnet Forum
WIZnet e-shop (US)
WIZnet e-shop (US)
WIZnet e-shop (KR)
WIZnet e-shop (KR)
WIZnet e-shop (EU)
WIZnet e-shop (EU)
WIZnet e-shop Hong Kong
WIZnet e-shop Hong Kong
Technical Support
Technical Support
Buy Now
OSHW (Open Source Hardware)
>W5500 Ethernet Shield
>ioShield-A
>ioShield-K
>ioShield-L
>WizFi Shield
>W5200 Ethernet Shield