440 440-084 EMI/RFI Tinel-Lock(R) Ring Adapter Rotatable Coupling - Standard Profile CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING FOR TINEL-LOCK(R) RING TERMINATIONS 440 F S 084 M 20 12-8 AI T1 Product Series Shrink Boot Options (Table IV - Omit for none) Connector Designator Tinel-Lockfi Ring Supplied (Table V - Omit for none) Angle and Profile H = 45 J = 90 S = Straight Length: S only (1/2 inch increments, e.g. 8 = 4.000 inches) Basic Part No. Cable Entry (Table IV) Finish (Table II) Shell Size (Table I) Length .060 (1.52) Min. Order Length 1.5 inch ** Length .060 (1.52) Min. Order Length 1.0 inch (See Note 4) L (Table IV) O-Ring A Thread (Table I) Length ** C Typ. (Table I) J* K* * (Table IV) STYLE 2 (STRAIGHT See Note 1) .135 (3.4) .005 (.1) .272 (6.9) Ref. .88 (22.4) Max .525 (13.3) E G (Table III) (Table III) F (Table III) STYLE 2 (45 & 90 See Note 1) H (Table III) .070 (1.8) Thermochromic Paint (Note 6) Tinel-Lock(R) Ring Option (See Table V) (c) 2005 Glenair, Inc. Add "-445" to Specify Glenair's Non-Detent, ("NESTOR") Spring-Loaded, Self-Locking Coupling. See Page 41 for Details. Tinel-Lock(R) is a registered trademark of Tyco CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 60 www.glenair.com 440 440-084 EMI/RFI Tinel-Lock(R) Ring Adapter Rotatable Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Dash No. 04 05 06 07 08 10 12 14 16 18 20 22 J I.D. .250 (6.4) .312 (7.9) .375 (9.5) .437 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) Shell Size Conn. Desig. H A-F-L-S 03 09 08 10 11 13 12 14 15 17 16 18 19 21 20 22 23 25 24 28 32 36 40 44 48 61 K Dia Max .375 (9.5) .437 (11.1) .500 (12.7) .562 (14.3) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) TABLE III: ELBOW DIMENSIONS E Max .64 (16.3) .64 (16.3) .66 (16.8) .69 (17.5) .71 (18.0) .73 (18.5) .75 (19.1) .77 (19.6) .80 (20.3) .82 (20.8) 1.04 (26.4) 1.09 (27.7) 1.14 (29.0) 1.18 (30.0) 1.24 (31.5) 1.29 (32.8) 1.00 (25.4) F Max .89 (22.6) .89 (22.6) .92 (23.4) .94 (23.9) .97 (24.6) .99 (25.1) 1.00 (25.4) 1.02 (25.9) 1.06 (26.9) 1.09 (27.7) 1.26 (32.0) 1.30 (33.0) 1.35 (34.3) 1.39 (35.3) 1.44 (36.6) 1.49 (37.8) 1.21 (30.7) TABLE IV: CABLE ENTRY L +.008 (.2) Shrink Boot -.000 (.0) Option T1* .044 (1.1) 770-001S103W1 .044 (1.1) 770-001S104W1 .044 (1.1) 770-001S104W1 .044 (1.1) 770-001S105W1 .044 (1.1) 770-001S105W1 .044 (1.1) 770-001S106W1 .044 (1.1) 770-001S107W1 .069 (1.8) 770-001S107W1 .069 (1.8) 770-001S107W1 .069 (1.8) 770-001S108W1 .069 (1.8) 770-001S108W1 .084 (2.1) 770-001S108W1 G Max .75 (19.1) .75 (19.1) .81 (20.6) .87 (22.1) .92 (23.4) .98 (24.9) 1.02 (25.9) 1.08 (27.4) 1.14 (29.0) 1.20 (30.5) 1.48 (37.6) 1.61 (40.9) 1.72 (43.7) 1.83 (46.5) 1.95 (49.5) 2.08 (52.8) 1.39 (35.3) H Max 1.00 (25.4) 1.00 (25.4) 1.06 (26.9) 1.12 (28.4) 1.19 (30.2) 1.25 (31.8) 1.27 (32.3) 1.33 (33.8) 1.41 (35.8) 1.48 (37.6) 1.72 (43.7) 1.81 (46.0) 1.92 (48.8) 2.03 (51.6) 2.16 (54.9) 2.28 (57.9) 1.57 (39.9) Shrink Boot Option T2** 770-001S203W1 770-001S204W1 770-001S204W1 770-001S205W1 770-001S205W1 770-001S206W1 770-001S206W1 770-001S207W1 770-001S207W1 770-001S208W1 770-001S208W1 770-001S208W1 Tinel-Lock(R) Ring Entry Size 04 05 06 07 08 10 12 14 16 18 20 22 *T1 Option: Glenair shrink boot supplied with W1 high temperature hot melt adhesive. **T2 Option: This is a halogen-free system. Glenair shrink boot supplied with W1 high temperature hot melt adhesive. 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Interface O-Ring not supplied with Connector Designator A. 3. Consult factory for shorter lengths on straight backshells. 4. See pages 40 for Shrink Boot Reference Information. 5. The Tinel-Lock(R) ring designator must be specified according to the type of cable braid used. Tinel-Lock(R) rings are marked with thermochromic paint which changes color when the correct installation temperature is reached. BI rings are identified with a red spot. CI rings are identified with a blue spot. (c) 2012 Glenair, Inc. CAGE Code 06324 TABLE V: TINEL-LOCK(R) RING Ring Braid Type Designator Single Layer 36 AWG AI Single Layer 34 AWG AI Single Layer 32 AWG BI Single Layer 30 AWG BI Double Layer 36 AWG BI Double Layer 34 AWG BI Double Layer 32 AWG CI Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 E-Mail: sales@glenair.com Series 440 - Page 61 www.glenair.com