High Dynamic Range IF Amplifier
50 - 1000 MHz
Rev. V2
MAAM-009116
1
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
1
Features
Single +5 V Supply Voltage
18 dB Gain
+22 dBm P1dB
+40 dBm OIP3
2.4 dB Noise Figure
Lead-Free SOT-89 Package
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Re-flow Compatible
Description
The MAAM-009116 is a high dynamic range
amplifier in a lead-free SOT-89 surface mount
plastic package. It can be operated from a single 5
volt supply.
The MAAM-009116 offers a combination of low
noise figure, high gain, and high output IP3 making
this an ideal IF amplifier for receiver and transmitter
applications.
The MAAM-009116 is fabricated using M/A-COM
Technology Solutions MESFET process to realize
low noise and high dynamic range. The process
features full passivation for performance and
reliability.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
Functional Block Diagram
Part Number Package
MAAM-009116-000000 Bulk Packaging
MAAM-009116-TR3000 3000 piece reel
MAAM-009116-001SMB 500 MHz Configuration
Ordering Information 1,2
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
RFIN RFOUT
Pin 1
GND
GND
RFIN RFOUT
Pin 1
GND
GND
Pin Configuration
Pin No. Function Pin No. Function
1 RF Input 3 RF Output/Bias
2 Ground 4 Ground
Parameter Maximum Operating
Conditions
Junction Temperature 4 150°C
RF Output Power 22 dBm
Operating Temperature -40°C to +85°C
Parameter Absolute Maximum
RF Input Power 20 dBm
Voltage 6 volts
Storage Temperature -5C to +150°C
Junction Temperature 175°C
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. M/A-COM Tech does not recommend sustained operation
near these survivability limits.
Maximum Operating Conditions3
Absolute Maximum Ratings5,6
3. These operating conditions will ensure MTTF > 1 x 106 hours.
4. Junction Temperature (TJ) = TC + Өjc * ((V * I) - (POUT - PIN))
Typical thermal resistance (Өjc) = 70° C/W.
a) For TC = 25°C,
TJ = 88 °C @ 5 V, 180 mA, POUT = 5 dBm, PIN = -13 dBm
b) For TC = 85°C,
TJ = 143 °C @ 5 V, 165 mA, POUT = 4.7 dBm, PIN = -13 dBm
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
High Dynamic Range IF Amplifier
50 - 1000 MHz
Rev. V2
MAAM-009116
2
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
2
Electrical Specifications for Single Ended Performance: Z0 = 50 Ω, TA = 25 °C, VDD = +5 V
Parameter Test Conditions Units Min. Typ. Max.
Gain 500 MHz dB 15 18
Noise Figure 500 MHz dB 2.4
Input Return Loss 500 MHz dB 13
Output Return Loss 500 MHz dB 12
Output P1dB 500 MHz dBm 22
Output IP3 500 MHz dBm 37 40
Current VDD = +5 V mA 180 200
Parts List
Part Value Case Style Manufacturer
C1,C3 1000 pF 0402 Murata
C2 0.018 µF 0805 Murata
L1 22 nH 0402 Coilcraft
L2 150 nH 0603 Coilcraft
R1 8.2 Ω 0402 Panasonic
PCB Layout
`
C1 L2 C3
VCC
RFIN RFOUT
`
L1 R1
C2
Application Schematic
High Dynamic Range IF Amplifier
50 - 1000 MHz
Rev. V2
MAAM-009116
3
3
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
3
Typical Performance Curves
IP3
Gain Input Return Loss
Output Return Loss
Gain
Noise Figure
0
1
2
3
4
400 450 500 550 600
+25°C
-40°C
+85°C
Frequency (MHz)
10
20
30
40
50
-5 0 5 10 15 20 25
+25°C
-40°C
+85°C
POUT (dBm)
5
10
15
20
25
0200 400 600 800 1000
+25°C
-40°C
+85°C
Frequency (MHz)
-25
-20
-15
-10
-5
0
0200 400 600 800 1000
+25°C
-40°C
+85°C
Frequency (MHz)
-30
-25
-20
-15
-10
-5
0
0200 400 600 800 1000
+25°C
-40°C
+85°C
Frequency (MHz)
10
15
20
25
30
-5 0 5 10 15 20 25
+25°C
-40°C
+85°C
POUT (dBm)
High Dynamic Range IF Amplifier
50 - 1000 MHz
Rev. V2
MAAM-009116
4
4
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
4
Lead Free SOT-89 Plastic Package
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
Plating is 100% matte tin over copper.
NOTES
1. REFERENCE EIAJ SC-62 FOR ADDITIONAL DIMENSIONAL AND TOLERANCE INFORMATION.
2. REFERENCE M538 FOR PCB FOOTPRINT INFORMATION.
3. ALL DIMENTIONS SHOWN AS INCHS/MM.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
Typical Performance Curves
Current
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
High Dynamic Range IF Amplifier
50 - 1000 MHz
Rev. V2
MAAM-009116
5
5
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit:
https://www.macom.com/support
5
M/A-COM Technology Solutions Inc. All rights reserved.
Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")
products. These materials are provided by MACOM as a service to its customers and may be used for
informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or
in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM
assumes no responsibility for errors or omissions in these materials. MACOM may make changes to
specifications and product descriptions at any time, without notice. MACOM makes no commitment to update
the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future
changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,
to any intellectual property rights is granted by this document.
THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR
IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR
INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY
OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN
THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,
WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.
MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM
customers using or selling MACOM products for use in such applications do so at their own risk and agree to
fully indemnify MACOM for any damages resulting from such improper use or sale.