FRONT FILE NEXT FILE UP Type N I S S E I APH POLYPROPYLENE FILM CAPACITOR Features Small size and light weight. Extended foil construction and leads are completely welded to electrodes. Protected against moisture and solvent through our original epoxy resin vacuum impregnation. Tangent of loss angle is normally low and its temperature characteristics is flat. Recommended for high fidelity circuit in audio, high voltage circuit in TV and other high frequency circuits. Characteristics of capacitance is "negative". Spacications Voltage Insulation resistance -25+70+85 100V200V400V630Vd.c Capacitance 100 V 0.000330.47F 200 V 0.00470.22F 400 V 0.00270.22F 630 V 0.0010.10F Cap. tolerance 2%(G)5(J)10%(K) Tangent of loss angle ( C0.33F 50,000 M or more C0.33F 30,000M or more Endurance 70 WV x140%, 1000hr C/C 2 tan 0.0011 within or less IR 15,000M or more Damp heat 40 9095RH WV 500hr C/C 3 tan 0.0012 or less within IR 15,000 M or more ( Temp range 100 VE-24 E-12 0.001 (at 1 KHz) or less Marked temperature shows operatable range when voltage derated. Dimensions(mm) Type WV APH E-12 CapF 331 391 471 561 681 821 102 122 152 182 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 184 224 274 334 394 474 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 W H 9.5 8.5 APH 100V.d.c. T P 5.5 6.0 F d 5.0 0.5 W H 12.0 11.0 14.0 12.0 12.5 11.5 9.0 11.0 14.0 7.5 9.5 10.0 11.0 11.5 11.0 11.5 12.0 12.5 16.0 18.0 18.5 19.0 13.5 14.5 15.0 15.5 16.5 17.0 18.0 24.0 24.5 18.5 19.5 20.5 6.0 6.5 6.0 10.0 12.0 12.5 13.0 13.5 5.0/7.5 18.5 6.5 7.0 6.5 7.5 8.0 7.5 8.0 8.5 9.5 11.5 9.0 10.0 11.0 12.0 12.5 0.6 5.0/7.5/10.0 19.0 15.0 14.0 14.5 15.0 16.0 17.0 18.0 24.0 5.0/7.5/15.0 25.0 20.0 8-14 15.0 20.0 19.0 20.0 21.5 APH 200V.d.c. T P 6.0 6.5 7.0 7.5 6.5 7.0 10.0 7.5 8.0 8.5 7.5 8.0 8.5 9.0 9.5 10.5 9.5 10.0 11.0 12.0 F d 5.0/7.5/10.0 0.6 15.0 5.0/7.5/15.0 20.0 15.0 20.0 0.8 0.8 When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 30 - Type N I S S E I APH POLYPROPYLENE FILM CAPACITOR Straight lead type Max T P 1.5 20Min Max H 2.0Max Style Max W Cap Cap range Single formed lead type 5.0Max 5.0Max 5.0Max 5.00.5 5.00.5 5.00.5 F 0.8 d0.05 F 0.8 F 0.8 100 V.dc 331474 331223, 243473 623823, 134224 304474 243224, 513224 913124, 244274 200 V.dc 472224 472822, 472273 103273, 563104 154224 103104, 333104 124, 333473 472822 400 V.dc 272224 272562, 272153 682153, 333473 104154 682393, 183473 563823, 183273 184224 272562 630 V.dc 102104 102222, 102822 153223, 563683 272822 272223, 103223 103123, 273473 823104 102222 F P For a pitch space (F) of the taping specification, refer to "TAPING DIMENSION"on p.5. Dimensions(mm) Type WV APH E-12 CapF 102 0.0010 122 0.0012 152 0.0015 182 0.0018 222 0.0022 272 0.0027 332 0.0033 392 0.0039 472 0.0047 562 0.0056 682 0.0068 822 0.0082 103 0.010 123 0.012 153 0.015 183 0.018 223 0.022 273 0.027 333 0.033 393 0.039 473 0.047 563 0.056 683 0.068 823 0.082 104 0.10 124 0.12 154 0.15 184 0.18 224 0.22 W 12.0 14.5 15.0 16.0 19.0 19.5 H 10.5 11.0 12.0 12.5 13.0 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 17.0 24.0 25.0 29.0 18.0 19.0 20.0 21.0 22.0 22.5 24.0 APH 400V.d.c. T P 6.0 6.5 7.0 7.5 6.5 7.0 7.5 8.0 8.5 7.5 8.0 8.5 7.5 F d 5.0/7.5/10.0 0.6 W 12.0 14.0 15.0 10.0 15.5 18.5 15.0 19.0 24.0 5.0/7.5/15.0 9.0 9.5 8.5 9.0 9.5 10.5 11.5 12.5 12.0 13.0 20.0 7.5/15.0 15.0 0.8 25.0 29.0 20.0 H 10.0 10.5 11.0 11.5 12.0 11.0 11.5 12.5 13.0 13.5 14.0 14.5 15.5 16.0 16.5 17.5 17.0 18.0 19.0 20.0 21.5 22.5 23.0 24.0 APH 630V.d.c. T P 6.5 7.5 F 5.0/7.5/10.0 d 0.6 7.0 10.0 7.5 8.0 8.5 9.0 9.5 8.0 8.5 9.0 10.0 8.5 9.5 10.5 11.5 12.5 13.5 12.5 13.0 15.0 5.0/7.5/15.0 20.0 15.0 0.8 20.0 25.0 25.0 Caution APH 10 8-14 APH is sensitive for heating due to its construction and film material. Refer to instructions for soldering handling of page 10. When using our capacitors, please consider the application notes on pages 8-14 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics. - 31 - NISSEI PART NUMBER CODE SYSTEM (1) (2) Type (3) Lead Internal con fig use uration (4) Rated voltage (5) CapacitanceCapacitance tolerance value Model Code (Standard "0000") (6) Lead Dimensions Packing Mode code *2 (2) Lead configuration code Code *1 C Lead configuration Typical Code Samples Straight lead Single formed (leads) 5.0 Code 0200 22.5 0225 25.0 0250 27.5 0275 0125 0150 Style Code 1 0200 *4 2 D200 3 D210 Formed leads type Lead taping for automatic insertion machine (Straight leads) 0175 20.0 Lead spacing (F) after forming indicated as multiplied by 10.Always in bulk Type S 17.5 0100 15.0 Lead taping for automatic insertion machine (Formed leads) Code 0075 12.5 Double formed (leads) Lead length multiplied by 10.Always in bulk F (mm) Lead spacing 0050 *3 10.0 V No lead processing and always in bulk (0000) 0050 Cut shorter (cut leads) 7.5 D Description 0000 F (mm) Lead spacing F (6) Lead dimension /Packing mode 4 D220 5 0200 6 0200 Single / Double-formed leads taped and ammo-packed. See p.5 to 6. 0200 (AMZ50V& Straight leads taped and ammo-packed. See p.5 to 6. AMC:C220) Straight leads type *1 The blank square signifies a straight lead type. *2 some types could bear different lead dimension codes, to be confirmed each case. As to reel packing, contact Nissei. *3 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "1050". *4 a code Cap471 to 393 in Model Code "0000"of AMC type shall be "A210". (3) Rated Voltage (V.d.c,V.a.c) Voltage Code 25 35 50 63 100 125 200 250 275 315 400 450 630 800 1000 1250 1600 0025 0035 0050 0063 0100 0125 0200 0250 0275 0315 0400 0450 0450 0800 1000 1250 1600 (4) Capacitance Tolerance Code F G H J K M Tolerance (%) +/- 1 +/- 2 +/- 3 +/- 5 +/- 10 +/- 20 (5) Capacitance Code Capacitance (pF) expressed in 3-digit code. The first two digits: Significant figures of capacitance value. The third digit: The number of zeros to follow the significant figures. Coding Sample 1) Coding of: AMZ 50V, 0.10 microF, +/-5%, SINGLE formed, taped and ammo-packed AMZ V (1) (2) Internal use 0050 (3) J 104 (4) (5) 0000 0200 Model Code (6) (Standard "0000") 2) Coding of MMC 250V 1.0 F +/-10%, single formed with 15.0mm leads, in bulk MMC F (1) (2) Internal use 0250 K 105 (3) (4) (5) 0000 0150 Model Code (6) (Standard "0000") 3) Coding have: MMT 50V 0.1 microF +/-5%, straight lead (in bulk) MMT (1) 0050 (2) Internal use (3) J 104 (4) (5) 0000 0050 Model Code (6) (Standard "0000") When using our capacitors, please consider the application notes on pages 8-15 and contact Nissei for any additional technical specifications relating to the limits of our performance characteristics.