© Coilcraft, Inc. 2008
Specifications subject to change without notice.
Please check our website for latest information.
Chip Inductors
–
1008HS Series (2520)
Document 160-1
Document 160-1 Revised 10/10/08
Coilcraft “HS” series chip inductors have been designed
especially for the needs of today’s high frequency de-
signer. Their ceramic construction delivers the highest
possible SRF and excellent Q values. The non-magnetic
coilform also ensures the utmost in thermal stability, pre-
dictability and batch consistency.
Inductance2Percent SRF min5DCR max6II
II
Irms7
Part number1(nH) tolerance3Q min4(MHz) (Ohms) (mA)
1008HS-100T_L_ 10 @ 50 MHz 550 @ 500 MHz 4100 0.08 1000
1008HS-120T_L_ 12 @ 50 MHz 550 @ 500 MHz 3300 0.09 1000
1008HS-150T_L_ 15 @ 50 MHz 550 @ 500 MHz 2500 0.10 1000
1008HS-180T_L_ 18 @ 50 MHz 550 @ 350 MHz 2500 0.11 1000
1008HS-220T_L_ 22 @ 50 MHz 555 @ 350 MHz 2400 0.12 1000
1008HS-270T_L_ 27 @ 50 MHz 5,2 55 @ 350 MHz 1600 0.13 1000
1008HS-330T_L_ 33 @ 50 MHz 5,2 60 @ 350 MHz 1600 0.14 1000
1008HS-390T_L_ 39 @ 50 MHz 5,2 60 @ 350 MHz 1500 0.15 1000
1008HS-470T_L_ 47 @ 50 MHz 5,2,1 65 @ 350 MHz 1500 0.16 1000
1008HS-560T_L_ 56 @ 50 MHz 5,2,1 65 @ 350 MHz 1300 0.18 1000
1008HS-680T_L_ 68 @ 50 MHz 5,2,1 65 @ 350 MHz 1300 0.20 1000
1008HS-820T_L_ 82 @ 50 MHz 5,2,1 60 @ 350 MHz 1000 0.22 1000
1008HS-101T_L_ 100 @ 25 MHz 5,2,1 60 @ 350 MHz 1000 0.56 650
1008HS-121T_L_ 120 @ 25 MHz 5,2,1 60 @ 350 MHz 950 0.63 650
1008HS-151T_L_ 150 @ 25 MHz 5,2,1 45 @ 100 MHz 850 0.70 580
1008HS-181T_L_ 180 @ 25 MHz 5,2,1 45 @ 100 MHz 750 0.77 620
1008HS-221T_L_ 220 @ 25 MHz 5,2,1 45 @ 100 MHz 700 0.84 500
1008HS-271T_L_ 270 @ 25 MHz 5,2,1 45 @ 100 MHz 600 0.91 500
1008HS-331T_L_ 330 @ 25 MHz 5,2,1 45 @ 100 MHz 570 1.05 450
1008HS-391T_L_ 390 @ 25 MHz 5,2,1 45 @ 100 MHz 500 1.12 470
1008HS-471T_L_ 470 @ 25 MHz 5,2,1 45 @ 100 MHz 450 1.19 470
1008HS-561T_L_ 560 @ 25 MHz 5,2,1 45 @ 100 MHz 415 1.33 400
1008HS-621T_L_ 620 @ 25 MHz 5,2,1 45 @ 100 MHz 375 1.40 300
1008HS-681T_L_ 680 @ 25 MHz 5,2,1 45 @ 100 MHz 375 1.47 400
1008HS-751T_L_ 750 @ 25 MHz 5,2,1 45 @ 100 MHz 360 1.54 360
1008HS-821T_L_ 820 @ 25 MHz 5,2,1 45 @ 100 MHz 350 1.61 400
1008HS-911T_L_ 910 @ 25 MHz 5,2,1 35 @ 50 MHz 320 1.68 380
1008HS-102T_L_ 1000 @ 25 MHz 5,2 35 @ 50 MHz 290 1.75 370
1. When ordering, specify tolerance, termination and packaging codes:
1008HS-102TGLC
Tolerance: F =1% G = 2% J = 5%
(Table shows stock tolerances in bold.)
Termination: L = RoHS compliant silver-palladium-platinum-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or
S = non-RoHS tin-lead (63/37).
Packaging: C =7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B= Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D=13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP
4286A impedance analyzer with Coilcraft-provided correlation pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8753D network analyzer and a
Coilcraft SMD-D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF840 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient.
8. Ambient temperature range:
–
40°C to +125°C with Irms current
+125°C to +140°C with derated current
9. Storage temperature range: Component:
–
40°C to +140°C
Packaging:
–
40°C to +80°C
10. Resistance to soldering heat: Three reflows at >217°C for 90 seconds
(+260°C ±5°C for 20 – 40 seconds), allowing parts to cool to room
temperature between.
11. Electrical specifications at 25°C.
12. Temperature coefficient of inductance: +25 to +125 ppm/°C.
For part marking data, see Color Coding section.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
© Coilcraft, Inc. 2008
1008HS Series (2520)
Specifications subject to change without notice.
Please check our website for latest information.
Document 160-2
Document 160-2 Revised 10/10/08
I
I
J
H
Recommended
Land Pattern
A
B
overall
F
G
E
terminal
F
C
Terminal wraparound:
approx 0.015/0,38 both ends
1000
900
800
700
600
500
400
300
200
100
0
Frequency (MHz)
Inductance (nH)
1000 1000010010
1
750 nH
330 nH
100 nH
47 nH
12 nH
100
90
80
70
60
50
40
30
20
10
0
10 100
Frequency (MHz)
Q factor
1000 10000
47 nH
12 nH
330 nH
750 nH
100 nH
AB C
max max max E F G H IJ
0.105 0.095 0.070 0.080 0.020 0.060 0.100 0.040 0.050 inches
2,67 2,41 1,78 2,03 0,51 1,52 2,54 1,02 1,27 mm
Weight: 28.3 – 31.5 mg
Tape and reel: 2000/7″ reel; 7500/13″ reel 8 mm tape width
For packaging data see Tape and Reel Specifications section.
Irms Derating
-40 -20 0 20 40 60 80 100 140120
Ambient temperature (°C)
120
110
100
90
80
70
60
50
40
30
20
10
0
Percent of rated rmsI
25°C
Typical Q vs Frequency Typical L vs Frequency
