Characteristics Reliability SVPF Items Condition (V) - 2.5 4.0 Surge voltage (V) Room temperature 3.3 5.2 Category temperature range () Capacitance tolerance () Dissipation Factor (DF) Surface mount type SVPE SVPS SVPD SVPC SVPB SVPA SVPA SVQP Leakage current1 Radial lead type SEPC SEQP SEP Damp heat(Steady state) POSCAP Line-up Guidelines and precautions for use Packing specifications Please see the attached characteristics list Please see the attached characteristics list Please see the attached characteristics list Based the value at 100kHz, 20 60, 90 to 95%RH, 1,000h, No-applied voltage VPS (230 X 75s) -55 Z/Z20 0.75 to 1.25 105 Z/Z20 0.75 to 1.25 C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit Fundamental structure haracteristics Technical data Recommended soldering condition Reliability Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) C/C Within 10% of the initial value DF Within 1.3 times of the initial limit ESR Within 1.3 times of the initial limit LC Within the initial limit (after voltage processing) Polarity marking Cathode 003 Size 0.5 code D W Case No. Series B6, C6 size is PA, E7, F8 size is SVPA SVPA 47 20 (unit : mm) 0.2max Rated capacitance Rated voltage L R L 0.1 -0.4 W 0.2 H 0.2 C 0.2 R P 0.2 B6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 F8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 Size list RV F Surface mount type TV B6 B6 180 Catalog Deletion and EOL models 35 1700 12 80 26 1970 12 300 4SVPA68MAA 4.0 68 30 26 1970 12 300 2R5SVPA82MAA 2.5 82 30 26 1970 12 300 20SVPA22M 20 22 35 31 2040 12 88 16SVPA39MAA 16 39 35 31 2040 12 300 16SVPA39MAAY 16 39 24 20 2460 12 300 10SVPA68MAA 10 68 30 26 2200 12 300 6SVPA120MAA 6.3 120 22 19 2570 12 300 4SVPA150MAA 4.0 150 22 19 2570 12 300 2R5SVPA180MAA 2.5 180 20 18 2690 12 300 20SVPA47M 20 47 33 29 2630 12 188 16SVPA82MAA 16 82 30 25 2760 12 262 10SVPA150MAA 10 150 30 25 2760 12 500 6SVPA220MAA 6.3 220 22 19 3220 12 500 4SVPA270MAA 4.0 270 22 19 3220 12 500 2R5SVPA330MAA 2.5 330 20 18 3370 12 500 16SVPA180M 16 180 29 28 3430 12 576 10SVPA330M 10 330 24 23 3770 12 660 6SVPA470M 6.3 470 20 19 4130 12 592 4SVPA680M 4.0 680 20 19 4130 12 544 2R5SVPA820M 2.5 820 19 18 4240 12 500 1 The ESR value at 300kHz is a reference one. 20 Recommended land pattern dimension of PWB a b E7 a b B6 1.4 7.4 1.6 C6 2.1 9.1 1.6 E7 2.8 11.1 1.9 F8 4.3 13.1 1.9 F8 470 F8 F8 F8 Coefficient 120Hz < f < 1kHz 0.05 1kHz < f < 10kHz 0.3 10kHz Recommended soldering condition Fundamental structure Characteristics Reliability SVPE SVPS SVPD SVPC SVPB SVPA SVPA SVQP Selection guide SVP SEPF SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up Guidelines and precautions for use Series system diagram Image of case size Products list Explanation of part numbers Packing specifications Marking Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics TPU TPH Frequency coefficient for ripple current Frequency Packing specifications Radial lead type Reliability E7 E7 Packing specifications SMD type c E7 270 Products list SVPF (unit : mm) Size code F8 220 330 40 30 E7 C6 10 47 E7 C6 Leakage current (A)(max) After 2 minutes 6.3 C6 150 DF (% max) 6SVPA47MAA C6 B6 120 820 TQC 16 F8 20 C6 680 TH 46 10 39 82 TA 6.3 C6 TPG TPF 4.0 22 68 TPLTPLF 2.5 B6 47 TPB/TPC RV : Rated voltage 10 TPH TPE E7 1 In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 105. 2 Please refer to page 26 for reflow soldering conditions. TPU TPSF B6 C6 C/C Marking Recommended land pattern dimension 23 120Hz/20 P C Explanation of part numbers 18 M : 20 H Products list 12 100kHz/20 D Image of case size 8.2 Marking and dimensions Selection guide Series system diagram 20 120Hz/20 Catalog Deletion and EOL series Resistance to soldering heat2 16 -55 to 105 SVP SEPF 10 - 105, 2,000h, Rated voltage applied Endurance 6.3 Rated voltage applied, after 2 minutes Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. 20SVPA10M Specifications Rated voltage Part number Rated ripple current 100kHz (mArms) at 105 Technical data Fundamental structure Specifications ESR (m) (max) Rated Rated voltage capacitance 100kHz/20 300kHz/201 (F) (V) Image of case size Surface mount type Recommended soldering condition Size code Series system diagram Radial lead type Packing specifications Radial lead type SVPA series characteristics list Guidelines and precautions for use Technical data Packing specifications SMD type SVPA is designed as the low ESR version of the SVP series. Suitable for miniaturizing devices and circuits. This product can support lead free-reflow.2 SVPA Series OS-CON Line-up Surface mount type Products list Surface mount type c Image of case size Technical data Series system diagram Selection guide Guidelines and precautions for use RoHS compliance Low ESR Large ripple current Selection guide SVPASeries Surface mount type OS-CON Line-up < f < 100kHz 0.7 100kHz < f < TPG TPSF TPE TPB/TPC TPLTPLF TPF TA TV 500kHz TH 1 TQC Catalog Deletion and EOL models 47 Characteristics Reliability SVPF Items Condition (V) - 2.5 4.0 Surge voltage (V) Room temperature 3.3 5.2 Category temperature range () Capacitance tolerance () Dissipation Factor (DF) Surface mount type SVPE SVPS SVPD SVPC SVPB SVPA SVPA SVQP Leakage current1 Radial lead type SEPC SEQP SEP Damp heat(Steady state) POSCAP Line-up Guidelines and precautions for use Packing specifications Please see the attached characteristics list Please see the attached characteristics list Please see the attached characteristics list Based the value at 100kHz, 20 60, 90 to 95%RH, 1,000h, No-applied voltage VPS (230 X 75s) -55 Z/Z20 0.75 to 1.25 105 Z/Z20 0.75 to 1.25 C/C Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit Fundamental structure haracteristics Technical data Recommended soldering condition Reliability Within 20% of the initial value DF Within 1.5 times of the initial limit ESR Within 1.5 times of the initial limit LC Within the initial limit (after voltage processing) C/C Within 10% of the initial value DF Within 1.3 times of the initial limit ESR Within 1.3 times of the initial limit LC Within the initial limit (after voltage processing) Polarity marking Cathode 003 Size 0.5 code D W Case No. Series B6, C6 size is PA, E7, F8 size is SVPA SVPA 47 20 (unit : mm) 0.2max Rated capacitance Rated voltage L R L 0.1 -0.4 W 0.2 H 0.2 C 0.2 R P 0.2 B6 5.0 5.9 5.3 5.3 6.0 0.6 to 0.8 1.4 C6 6.3 5.9 6.6 6.6 7.3 0.6 to 0.8 2.1 E7 8.0 6.9 8.3 8.3 9.0 0.6 to 0.8 3.2 F8 10.0 7.9 10.3 10.3 11.0 0.6 to 0.8 4.6 Size list RV F Surface mount type TV B6 B6 180 Catalog Deletion and EOL models 35 1700 12 80 26 1970 12 300 4SVPA68MAA 4.0 68 30 26 1970 12 300 2R5SVPA82MAA 2.5 82 30 26 1970 12 300 20SVPA22M 20 22 35 31 2040 12 88 16SVPA39MAA 16 39 35 31 2040 12 300 16SVPA39MAAY 16 39 24 20 2460 12 300 10SVPA68MAA 10 68 30 26 2200 12 300 6SVPA120MAA 6.3 120 22 19 2570 12 300 4SVPA150MAA 4.0 150 22 19 2570 12 300 2R5SVPA180MAA 2.5 180 20 18 2690 12 300 20SVPA47M 20 47 33 29 2630 12 188 16SVPA82MAA 16 82 30 25 2760 12 262 10SVPA150MAA 10 150 30 25 2760 12 500 6SVPA220MAA 6.3 220 22 19 3220 12 500 4SVPA270MAA 4.0 270 22 19 3220 12 500 2R5SVPA330MAA 2.5 330 20 18 3370 12 500 16SVPA180M 16 180 29 28 3430 12 576 10SVPA330M 10 330 24 23 3770 12 660 6SVPA470M 6.3 470 20 19 4130 12 592 4SVPA680M 4.0 680 20 19 4130 12 544 2R5SVPA820M 2.5 820 19 18 4240 12 500 1 The ESR value at 300kHz is a reference one. 20 Recommended land pattern dimension of PWB a b E7 a b B6 1.4 7.4 1.6 C6 2.1 9.1 1.6 E7 2.8 11.1 1.9 F8 4.3 13.1 1.9 F8 470 F8 F8 F8 Coefficient 120Hz < f < 1kHz 0.05 1kHz < f < 10kHz 0.3 10kHz Recommended soldering condition Fundamental structure Characteristics Reliability SVPE SVPS SVPD SVPC SVPB SVPA SVPA SVQP Selection guide SVP SEPF SEPC SEQP SEP Catalog Deletion and EOL series POSCAP Line-up Guidelines and precautions for use Series system diagram Image of case size Products list Explanation of part numbers Packing specifications Marking Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics TPU TPH Frequency coefficient for ripple current Frequency Packing specifications Radial lead type Reliability E7 E7 Packing specifications SMD type c E7 270 Products list SVPF (unit : mm) Size code F8 220 330 40 30 E7 C6 10 47 E7 C6 Leakage current (A)(max) After 2 minutes 6.3 C6 150 DF (% max) 6SVPA47MAA C6 B6 120 820 TQC 16 F8 20 C6 680 TH 46 10 39 82 TA 6.3 C6 TPG TPF 4.0 22 68 TPLTPLF 2.5 B6 47 TPB/TPC RV : Rated voltage 10 TPH TPE E7 1 In case of some problems for measured values, measure after applying rated voltage for 120 minutes at 105. 2 Please refer to page 26 for reflow soldering conditions. TPU TPSF B6 C6 C/C Marking Recommended land pattern dimension 23 120Hz/20 P C Explanation of part numbers 18 M : 20 H Products list 12 100kHz/20 D Image of case size 8.2 Marking and dimensions Selection guide Series system diagram 20 120Hz/20 Catalog Deletion and EOL series Resistance to soldering heat2 16 -55 to 105 SVP SEPF 10 - 105, 2,000h, Rated voltage applied Endurance 6.3 Rated voltage applied, after 2 minutes Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. 20SVPA10M Specifications Rated voltage Part number Rated ripple current 100kHz (mArms) at 105 Technical data Fundamental structure Specifications ESR (m) (max) Rated Rated voltage capacitance 100kHz/20 300kHz/201 (F) (V) Image of case size Surface mount type Recommended soldering condition Size code Series system diagram Radial lead type Packing specifications Radial lead type SVPA series characteristics list Guidelines and precautions for use Technical data Packing specifications SMD type SVPA is designed as the low ESR version of the SVP series. Suitable for miniaturizing devices and circuits. This product can support lead free-reflow.2 SVPA Series OS-CON Line-up Surface mount type Products list Surface mount type c Image of case size Technical data Series system diagram Selection guide Guidelines and precautions for use RoHS compliance Low ESR Large ripple current Selection guide SVPASeries Surface mount type OS-CON Line-up < f < 100kHz 0.7 100kHz < f < TPG TPSF TPE TPB/TPC TPLTPLF TPF TA TV 500kHz TH 1 TQC Catalog Deletion and EOL models 47