61-13/S3GHBHC-B04/ET - Everlight Electronic Co., Ltd.

EVERLIGHT ELECTRONICS CO.,LTD.

Technical Data Sheet

Luminosity Full Color LED 61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Features

․Super-luminosity chip LED.

․White SMT package.

․Built in Red, Green, and Blue chips.

․Lead frame package with individual 6 pins.

․Wide viewing angle.

․Soldering methods: IR reflow soldering.

․Pb-free.

․ESD protection.

․The product itself will remain within RoHS

compliant version.

Descriptions

․Due to the package design, 61-13 has wide viewing angle ,

low power consumption and adjusting each color is possible

thanks to serial connection by 6 terminal connection (Individual

driving by each terminal) in case of using several number of LED.

And makes it ideal for light pipe application.

Applications

․Amusement equipment.

․Information boards.

․Flashlight for digital camera of cellular phone.

Device Selection Guide

Chip

Type Material Emitted Color Lens Color

S3 AlGaInP Reddish Orange

GH InGaN Brilliant Green

BH InGaN Blue

Water Clear

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Package Outline Dimensions

1

2

3

456

32

45

1

6

Notes: 1.All dimensions are in millimeters. 2.Tolerances unspecified are ±0.1mm.

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Unit

Reverse Voltage VR 5 V

R6 50

GH 25

Forward Current IF

BH 25

mA

R6 120

GH 110

Power Dissipation Pd

BH 110

mA

R6 100

GH 100

Peak Forward Current(Duty

1/10 @ 1KHZ) IFP

BH 100

mA

R6 2000

GH 2000

Electrostatic Discharge ESD

BH 2000

V

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40~ +90 ℃

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Electro-Optical Characteristics (Ta=25℃)

Notes:

1. Tolerance of Luminous Intensity ±11%

2. Tolerance of Dominant Wavelength ±1 nm

3. Tolerance of Dominant Forward Voltage ±0.1V

Parameter Symbol Min. Typ. Max. Unit Condition

S3 180 ----- 360 IF=20mA

GH 450 ----- 900 IF=20mA

Luminous Intensity Iv

BH 112 ----- 225

mcd

IF=20mA

Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA

S3 ----- 632 -----

GH ----- 518 -----

Peak Wavelength λp

BH ----- 468 -----

nm IF=20mA

S3 613.5 ----- 618.5

GH 520.0 ----- 525.0

Dominant

Wavelength λd

BH 465.0 ----- 470.0

nm IF=20mA

S3 ----- 20 -----

GH ----- 35 -----

Spectrum Radiation

Bandwidth △λ

BH ----- 35 -----

nm IF=20mA

S3 1.8 ---- 2.4

GH 3.0 ---- 3.6

Forward Voltage VF

BH 3.0 --- 3.6

V IF=20mA

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Bin Range Of Luminous Intensity

Symbol Bin Code Min. Max. Unit Condition

S1 180 225

S2 225 285

S3

T1 285 360

U1 450 565

U2 565 715

GH

V1 715 900

R1 112 140

R2 140 180

Iv

BH

S1 180 225

mcd IF =20mA

Bin Range Of Dominant Wavelength

Symbol Bin Code Min. Max. Unit Condition

S3 ---- 613.5 618.5

GH ---- 520.0 525.0

λd

BH ---- 465.0 470.0

nm IF =20mA

Notes:

1. Tolerance of Luminous Intensity ±11%

2. Tolerance of Dominant Wavelength ±1 nm

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Bin Range Of Forward Voltage

Symbol Bin Code Min. Max. Unit Condition

S1 1.8 2.0

S2 2.0 2.2

S3

S3 2.2 2.4

G1 3.0 3.2

G2 3.2 3.4

GH

G3 3.4 3.6

B1 3.0 3.2

B2 3.2 3.4

VF

BH

B3 3.4 3.6

V IF =20mA

Notes:

1. Tolerance of Forward Voltage ±0.1 V

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Typical Electro-Optical Characteristics Curves (BH)

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Typical Electro-Optical Characteristics Curves (GH)

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Typical Electro-Optical Characteristics Curves (S3)

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Label explanation

CAT: Luminous Intensity Rank

HUE: Dom. Wavelength Rank

REF: Forward Voltage Rank

Reel Dimensions

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Loaded quantity per reel 800 PCS/reel

Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Label Desiccant Label

Aluminum moisture-proof bag

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Reliability Test Items And Conditions

The reliability of products shall be satisfied with items listed below.

Confidence level：90%

LTPD：10%

No. Items Test Condition

Test

Hours/Cycles Sample

Size Ac/Re

1 Reflow Soldering

Temp. : 260℃±5℃

Min. 5sec. 6 Min. 22 PCS. 0/1

2 Temperature Cycle

H : +100℃ 15min

∫ 5 min

L : -40℃ 15min

300 Cycles 22 PCS. 0/1

3 Thermal Shock

H : +100℃ 5min

∫ 10 sec

L : -10℃ 5min

300 Cycles 22 PCS. 0/1

4 High Temperature

Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1

5 Low Temperature

Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1

6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1

7 High Temperature /

High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1

* For each die

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 13 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

120 Sec. Max.

1~5 °C / Sec. Pre-heating

180~200°C 60 Sec. Max.

Above 220°C

260°C. Max.

10 Sec. Max.

1~5 °C / Sec.

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

EVERLIGHT ELECTRONICS CO.,LTD.

61-13/S3GHBHC-B04/ET

Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 14 of 14

Device No.: DSE-613-010 Prepared date: 08-Nov-2006 Prepared by: Josh Chou

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within

once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand

whether the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936

Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306

Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com