132173 - AMPHENOL RF - Datasheet.Live

SMA COAXIAL CONNECTORS

The Connex SMAconnectors are semi-precision, sub-miniature, high-frequency connectors

which offer reliable broadband performance DC to 18GHz with low reflection and constant

50 ohm impedance.

The main features are high mechanical strength, high durability and low VSWR. Matured

design principles, careful manufacturing at all stages and a thorough quality assurance

organization are the bases for the well-known quality of Connex SMA connectors.

PARTS NAME MIL STANDARD ECONOMIC TYPE

Body, coupling nut, other metal parts Non-magnetic stainless steel per Brass per QQ–B–626

QQ–S–764 #303

finish: passivated finish: nickel or gold per requirement

Contacts Male Brass per QQ–B–626 Brass per QQ–B–626

Female Beryllium copper per QQ–C–530 Beryllium copper per QQ–C–530

heat treated per MIL–H–7199 heat treated per MIL–H–7199

Finish: .00005" min gold plated per Finish: .00005" min gold plated per

MIL–G–45204 type 1, Grade C. MIL–G–45204 type 1, Grade C.

Insulator PTFE PTFE

Gasket Silicone rubber Silicone rubber

Crimp ferrule Seamless copper tubing alloy Seamless copper tubing alloy

Selection Guide *Suitable for direct mounting on *For commercial application only

aluminium panels *Lower cost

*Lowest cost

MATERIAL SPECIFICATIONS

Impedance 50 ohm

Frequency range *Semi–rigid cable for .141" or .085" O.D. copper jacket: 0–18 GHz

*Flexible cable: 0–12.4 GHz

Voltage rating *RG–58, 141, 142, 223: 500v peak

*RG–174, 188, 316: 375V peak

Dielectric withstanding voltage *.141" & RG–58 cable group: 1000V RMS

* .085" & RG–316 cable group: 750V RMS

VSWR–straight Connectors *f in GHz *.141" semi–rigid cable group: 1.05 + .005f *RG–58 cable group: 1.15 + .01f

*RG–174 cable group: 1.15 + .02f *RG–178 cable group: 1.20 + .025f

Contact resistance Center: 2.0 milliohms Body: 2.0 milliohms Braid to body: 0.5 milliohms

Insulation resistance 5000 Megohms

RF leakage -90 db min. at 2–3 GHz

Insertion loss db max. = .06 freq. GHz.. Test frequency @6.0 GHz

MILITARY SPECIFICATIONS

MIL–C–39012 & MIL–C–83517 SMA

ELECTRICAL SPECIFICATIONS

SMA.4 11/27/01 5:05 PM Page 25

INTERFACE MATING DIMENSIONS

SMA COAXIAL CONNECTORS

INTERFACE MATING DIMENSIONS

SMA COAXIAL CONNECTORS

NOTE: 1. I.D. TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED

WITH 1.32/1.37 MM DIA. PIN.

Letter Millimeters [Inches]

Minimum Maximum

A 5.28 [.208] 5.49 [.216]

B 4.60 [.181] 4.67 [.184]

C 1.88 [.074] 1.98 [.078]

D 0.00 0.25 [.010]

E 0.38 [.015] 1.14 [.045]

F 2.92 [.115] –

G 0.00 0.25 [.010]

H 4.32 [.170] –

J 1.24 [.049] 1.30 [.051]

K 5.54 [.218] –

Letter Millimeters [Inches]

Minimum Maximum

A 6.35 [.250] 6.73 [.265]

B 4.53 [.178] 4.59 [.181]

C 2.54 [.100] 3.43 [.135]

D 0.00 0.25 [.010]

E 1.91 [.075] 2.54 [.100]

F 0.00 0.25 [.010]

G 0.90 [.035] 0.94 [.037

]

H 0.00 0.38 [.015]

J 1.24 [.049] 1.30 [.051]

PLUG

JACK

SMA.4 11/27/01 5:05 PM Page 26

SMA COAXIAL CONNECTORS

DIRECT SOLDER FOR SEMI-RIGID .047", .085" AND .141" CABLE

SMA COAXIAL CONNECTORS

All connectors listed, unless otherwise noted,

are Commercial Grade construction, gold-

plated brass bodies with 50µ" gold contacts.

All insulators are teflon. All other parameters

are equal to Mil Standard construction.

Mil Standard connectors, i.e. Stainless Steel

body, available upon request as per material

specifications listed in Material section on

preceding page.

All dimensions in millimeters and [inches].

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

132100 10 Gold N/A 50 N/A

132100SS 10 S/S N/A 50 N/A

STAINLESS STEEL

132266 10 Gold N/A 50 N/A

SHORT PROFILE

132266SS 10 S/S N/A 50 N/A

STAINLESS STEEL, SHORT PROFILE

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CABLE PLUG — CABLE CENTER CONTACT

132101 11 Gold Teflon 50 N/A

132102 10 Gold Teflon 50 N/A

132200 10 Gold Teflon 50 N/A

STAINLESS STEEL

132248 11 Gold Teflon 50 N/A

STAINLESS STEEL NUT

132296 12 Gold Teflon 50 N/A

132249 13 Gold Teflon 50 N/A

132290 10 Gold Teflon 50 N/A

CONTACT IN BODY

132294 11 Gold Teflon 50 N/A

CONTACT IN BODY

132290-10 10 Gold Teflon 50 N/A

EXTENDED BODY

132294-10 11 Gold Teflon 50 N/A

EXTENDED BODY

Cable: .047" Cable, A = 1.24 mm [.049"] min,

B = 3.0 mm [.118"] min

.085" Cable, A = 2.2 mm [.087"] min,

B = 3.0 mm [.118"] min

.141" Cable, A = 3.6 mm [.142"] min,

B = 4.6 mm [.181"] min

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CABLE PLUG — WITH CONTACT

132100

132101

132266

01 58/ 58A/ 58C/ 141/ 303/

LMR195

™

/ B7806A

01A 55/ 142/ 223/ 400

01B LMR200

™

/ B7807A

02 58 PLENUM/THINNET/

122U/ B88240/ B89907

03 59/ 62/ 140/ 210

03A 59/ U-20AWG

04 59/ U PLENUM

04A 59/ U PLENUM-20AWG

05 174/ 188A/ 316/ B7805A

05A 316/ U DOUBLE BRAIDED

06 179/ 187/ B9221

06A 179/ U DOUBLE BRAIDED

07 8/ 8A/ 213/ 393

07A 214

07B 8X/ LMR240

™

/ B7808A

07C B9913/ LMR400

™

B7810A/ B8214

07D B89913

07E 11

07F 11/ U-14AWG/ B8213/

B9292/ B7731/ B1859A

08 6/ 143/ 212

08A B1694A/ B9248

08B 6 PLENUM/ B1695A

09 B8227/ 89207

10 .141 SEMI-RIGID/ 402/U

11 .085 SEMI-RIGID/ 405/U

12 .250 SEMI-RIGID

13 .047 SEMI-RIGID/ B1674A

14 178/ 196

15 B8281/ B9231/ B9141

15A B88281

16 180/ 195/ 122/ B8218/

B1865A/ B1855

17 LMR6OO

™

18 AT&T734A/ B1505A

19 AT&T735A/ B735A1

CABLE GROUP LEGEND

132290

132294-10

SMA.4 11/27/01 5:05 PM Page 27

SMA COAXIAL CONNECTORS

DIRECT SOLDER FOR SEMI-RIGID .047", .085" AND .141" CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132179 10 Gold Teflon 50 N/A

STAINLESS STEEL NUT

132188 11 Gold Teflon 50 N/A

STAINLESS STEEL NUT

Cable: .047" Cable, A = 1.24 mm [.049"] min,

B = 3.0 mm [.118"] min

.085" Cable, A = 2.2 mm [.087"] min,

B = 3.0 mm [.118"] min

.141" Cable, A = 3.6 mm [.142"] min,

B = 4.6 mm [.181"] min

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CABLE PLUG — WITH CONTACT — TORQUE NUT

132112 10 Gold Teflon 50 N/A

132201 10 Gold Teflon 50 N/A

STAINLESS STEEL NUT

132111 11 Gold Teflon 50 N/A

132250 13 Gold Teflon 50 N/A

Cable: .047" Cable, A = 1.24 mm [.049"] min,

B = 3.0 mm [.118"] min

.085" Cable, A = 2.2 mm [.087"] min,

B = 3.0 mm [.118"] min

.141" Cable, A = 3.6 mm [.142"] min,

B = 4.6 mm [.181"] min

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CABLE PLUG DC — 12.4 GHz

132104 10 Gold Teflon 50 N/A

132103 11 Gold Teflon 50 N/A

132257 13 Gold Teflon 50 N/A

Cable: .047" Cable, A = 1.24 mm [.049"] min,

B = 3.0 mm [.118"] min

.085" Cable, A = 2.2 mm [.087"] min,

B = 3.0 mm [.118"] min

.141" Cable, A = 3.6 mm [.142"] min,

B = 4.6 mm [.181"] min

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CABLE JACK

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD FEEDTHROUGH CABLE JACK — O-RING SEAL

132106 10 Gold Teflon 50 N/A

132105 11 Gold Teflon 50 N/A

132251 13 Gold Teflon 50 N/A

132273 13 Gold Teflon 50 N/A

EXTENDED BODY .725"

Cable: .047" Cable, A = 1.24 mm [.049"] min,

B = 3.0 mm [.118"] min

.085" Cable, A = 2.2 mm [.087"] min,

B = 3.0 mm [.118"] min

.141" Cable, A = 3.6 mm [.142"] min,

B = 4.6 mm [.181"] min

SMA.4 11/27/01 5:05 PM Page 28

SMA COAXIAL CONNECTORS

DIRECT SOLDER FOR SEMI-RIGID .047", .085" AND .141" CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132107 11 Gold Teflon 50 N/A

132108 10 Gold Teflon 50 N/A

132252 13 Gold Teflon 50 N/A

Cable: .047" Cable, A = 1.24 mm [.049"] min,

B = 3.0 mm [.118"] min

.085" Cable, A = 2.2 mm [.087"] min,

B = 3.0 mm [.118"] min

.141" Cable, A = 3.6 mm [.142"] min,

B = 4.6 mm [.181"] min

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT CABLE JACK — 4 HOLE SQUARE FLANGE

132109 11 Gold Teflon 50 N/A

132110 10 Gold Teflon 50 N/A

132253 13 Gold Teflon 50 N/A

Cable: .047" Cable, A = 1.24 mm [.049"] min,

B = 3.0 mm [.118"] min

.085" Cable, A = 2.2 mm [.087"] min,

B = 3.0 mm [.118"] min

.141" Cable, A = 3.6 mm [.142"] min,

B = 4.6 mm [.181"] min

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT CABLE JACK — 2 HOLE FLANGE

132293 11 Gold Teflon 50 N/A

132292 10 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL MOUNT CABLE JACK — 4-HOLE SQUARE FLANGE

132325 11 Gold Teflon 50 N/A

132324 10 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL MOUNT CABLE JACK — 2-HOLE FLANGE

SMA.4 11/27/01 5:05 PM Page 29

SMA COAXIAL CONNECTORS

CRIMP TERMINATIONS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132113 01 Gold Teflon 50 A

132195 01A Gold Teflon 50 A

132234 01B Gold Teflon 50 A

132231 07B Gold Teflon 50 A

132298 07C Gold Teflon 50 L

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PLUG — STANDARD CABLE

132114 05 Gold Teflon 50 B

132114SS 05 Gold Teflon 50 B

STAINLESS STEEL

132174 05 Gold Teflon 50 B

STAINLESS STEEL NUT

132178 05A Gold Teflon 50 C

132193 14 Gold Teflon 50 B

132242 16 Gold Teflon 50 B

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PLUG — MINIATURE CABLE

132122 01 Gold Teflon 50 A

132122SS 01 Gold Teflon 50 A

STAINLESS STEEL

132194 01A Gold Teflon 50 A

132235 01B Gold Teflon 50 A

132239 07B Gold Teflon 50 A

132299 07C Gold Teflon 50 L

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP PLUG — STANDARD CABLE

132123 05 Gold Teflon 50 B

132182 05A Gold Teflon 50 C

132173 14 Gold Teflon 50 B

132272 16 Gold Teflon 50 B

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP PLUG — MINIATURE CABLE

SMA.4 11/27/01 5:05 PM Page 30

SMA COAXIAL CONNECTORS

CRIMP TERMINATIONS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STANDARD CABLE

132116 01 Gold Teflon 50 A

132197 01A Gold Teflon 50 A

132236 01B Gold Teflon 50 A

132240 07B Gold Teflon 50 A

132332 07C Gold Teflon 50 L

MINIATURE CABLE

132117 05 Gold Teflon 50 B

132198 05A Gold Teflon 50 C

132229 05 Gold Teflon 50 B

SHORT BODY

132279 14 Gold Teflon 50 B

STRAIGHT CRIMP JACK — STANDARD & MINIATURE CABLE

STANDARD CABLE

132118 01 Gold Teflon 50 A

132191 01A Gold Teflon 50 A

132237 01B Gold Teflon 50 A

132241 07B Gold Teflon 50 A

132333 07C Gold Teflon 50 L

MINIATURE CABLE

132119 05 Gold Teflon 50 B

132176 05A Gold Teflon 50 C

132220 14 Gold Teflon 50 B

BULKHEAD CRIMP JACK — STANDARD & MINIATURE CABLE

STANDARD CABLE

132280 01 Gold Teflon 50 A

132281 01A Gold Teflon 50 A

132282 01B Gold Teflon 50 A

132283 07B Gold Teflon 50 A

MINIATURE CABLE

132284 05 Gold Teflon 50 B

132285 05A Gold Teflon 50 C

132286 14 Gold Teflon 50 B

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — O-RING SEAL — STANDARD & MINIATURE CABLE

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132246 01 Gold Teflon 50 A

132260 01A Gold Teflon 50 A

132245 05 Gold Teflon 50 B

132259 05A Gold Teflon 50 C

RIGHT ANGLE BULKHEAD CRIMP JACK — STANDARD & MINIATURE CABLE

SMA.4 11/27/01 5:05 PM Page 31

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

SMA COAXIAL CONNECTORS

CRIMP TERMINATIONS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132120 01 Gold Teflon 50 A

132254 01A Gold Teflon 50 A

PANEL CRIMP JACK — STANDARD CABLE

132121 05 Gold Teflon 50 B

132199 05A Gold Teflon 50 C

PANEL CRIMP JACK — MINIATURE CABLE

132326 05 Gold Teflon 50 B

132321 05A Gold Teflon 50 C

132327 14 Gold Teflon 50 B

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL JACK — 4-HOLE FLANGE

132328 05 Gold Teflon 50 B

132329 05A Gold Teflon 50 C

132330 14 Gold Teflon 50 B

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL JACK — 2-HOLE FLANGE

SMA.4 11/27/01 5:05 PM Page 32

SMA COAXIAL CONNECTORS

CLAMP TERMINATIONS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132124 05 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CLAMP PLUG — MINIATURE CABLE

132125 01 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CLAMP PLUG — STANDARD CABLE

SMA.4 11/27/01 5:05 PM Page 33

SMA COAXIAL CONNECTORS

CLAMP TERMINATIONS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132126 05 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CLAMP JACK — MINIATURE CABLE

132127 01 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CLAMP JACK — STANDARD CABLE

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132128 05 Gold Teflon 50 N/A

BULKHEAD CLAMP JACK — MINIATURE CABLE

132129 01 Gold Teflon 50 N/A

BULKHEAD CLAMP JACK — STANDARD CABLE

SMA.4 11/27/01 5:05 PM Page 34

SMA COAXIAL CONNECTORS

CLAMP TERMINATIONS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132130 05 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL CLAMP JACK — MINIATURE CABLE

132132 01 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CLAMP PLUG — STANDARD CABLE

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132131 05 Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CLAMP PLUG — MINIATURE CABLE

SMA.4 11/27/01 5:05 PM Page 35

132319

132320

SMA COAXIAL CONNECTORS

PRINTED CIRCUIT BOARD/STRAIGHT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132134 N/A Gold Teflon 50 N/A

132134-10

N/A Gold Teflon 50 N/A

SURFACE MOUNT

132319 N/A Gold Teflon 50 N/A

EXTENDED BOCY

132320 N/A Gold Teflon 50 N/A

2-HOLE PCB MOUNT

132291 N/A Gold Teflon 50 N/A

BULKHEAD MOUNT

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT JACK FOR P.C. BOARD

132133 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PLUG FOR P.C. BOARD

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132135 N/A Gold Teflon 50 N/A

RIGHT ANGLE PLUG FOR P.C. BOARD

132136 N/A Gold Teflon 50 N/A

132225 N/A Gold Teflon 50 N/A

DIECAST BODY

RIGHT ANGLE JACK FOR P.C. BOARD

132134

132291

SMA.4 11/27/01 5:05 PM Page 36

SMA COAXIAL CONNECTORS

PRINTED CIRCUIT BOARD/STRAIGHT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132203 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE BULKHEAD JACK FOR P.C. BOARD

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132264 N/A Gold Teflon 50 N/A

132264SSN/A S/S Teflon 50 N/A

132264-10SS

N/A S/S Teflon 50 N/A

SOLDER POT CONTACT

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PRESS FIT RECEPTACLE

132255 N/A Gold Teflon 50 N/A

132289 N/A Gold Teflon 50 N/A

BULKHEAD MOUNT

132322 N/A Gold Teflon 50 N/A

132270 N/A Gold Teflon 50 N/A

BULKHEAD MOUNT

END LAUNCH JACK RECEPTACLE

132270

132322

132255

.062 board

132289

SMA.4 11/27/01 5:06 PM Page 37

SMA COAXIAL CONNECTORS

BULKHEAD MOUNT/SOLDER POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132137 N/A Gold Teflon 50 N/A

132271 N/A Gold Teflon 50 N/A

EXTENDED BODY, BLUNT POST

BULKHEAD JACK RECEPTACLE — FRONT MOUNT

132138 N/A Gold Teflon 50 N/A

BULKHEAD JACK RECEPTACLE — REAR MOUNT

132139 N/A Gold Teflon 50 N/A

132227 N/A Gold Teflon 50 N/A

FLATWASHER

BULKHEAD JACK RECEPTACLE — REAR MOUNT

132137

132271

SMA.4 11/27/01 5:06 PM Page 38

SMA COAXIAL CONNECTORS

PANEL MOUNT/SOLDER POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132141 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 2-HOLE FLANGE

132140 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 4-HOLE SQUARE FLANGE

132142 N/A Gold Teflon 50 N/A

132215 N/A Gold Teflon 50 N/A

12.7 mm [.500"] MOUNTING HOLES

132304 N/A Gold Teflon 50 N/A

18.2 mm [.718"] MOUNTING HOLES

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 4-HOLE SQUARE FLANGE

132143 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 2-HOLE FLANGE

132142

SMA.4 11/27/01 5:06 PM Page 39

SMA COAXIAL CONNECTORS

PANEL MOUNT/SOLDER POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132275 N/A Gold Teflon 50 N/A

Remark: Extended teflon insulation available in various

lengths. Contact Connex marketing department

for part number and availability.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL MOUNT JACK RECEPTACLE — 2-HOLE 90% FLANGE — EXPOSED TFE TYPE

132276 N/A Gold Teflon 50 N/A

132288 N/A Gold Teflon 50 N/A

Remark: Extended teflon insulation available in various

lengths. Contact Connex marketing department

for part number and availability.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL MOUNT JACK RECEPTACLE — 2-HOLE 45% FLANGE — EXPOSED TFE TYPE

132267 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQUARE FLANGE

132318 N/A Gold Teflon 50 N/A

Remark: Extended teflon insulation available in various

lengths. Contact Connex marketing department

for part number and availability.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PANEL MOUNT RECEPTACLE — 4-HOLE FLANGE — EXPOSED TFE TYPE

132276

132288

SMA.4 11/27/01 5:06 PM Page 40

SMA COAXIAL CONNECTORS

PANEL MOUNT/SOLDER POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132144 N/A Gold Teflon 50 N/A

132300 N/A Gold Teflon 50 N/A

0.25 (.010") contact, 3.17 (.125") Teflon diameter

Remark: Extended teflon insulation available in various

lengths. Contact Connex marketing department

for part number and availability.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 4-HOLE SQUARE FLANGE — EXPOSED TFE TYPE

132145 N/A Gold Teflon 50 N/A

132301 N/A Gold Teflon 50 N/A

0.25 (.010") contact, 3.17 (.125") Teflon diameter

Remark: Extended teflon insulation available in various

lengths. Contact Connex marketing department

for part number and availability.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 2-HOLE FLANGE — EXPOSED TFE TYPE

132146 N/A Gold Teflon 50 N/A

132302 N/A Gold Teflon 50 N/A

0.25 (.010") contact, 3.17 (.125") Teflon diameter

Remark: Extended teflon insulation available in various

lengths. Contact Connex marketing department

for part number and availability.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 4-HOLE SQUARE FLANGE — EXPOSED TFE TYPE

132147 N/A Gold Teflon 50 N/A

132224 N/A Gold Teflon 50 N/A

0.25 (.010") contact, 3.17 (.125") Teflon diameter

Remark: Extended teflon insulation available in various

lengths. Contact Connex marketing department

for part number and availability.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 2-HOLE FLANGE — EXPOSED TFE TYPE

SMA.4 11/27/01 5:06 PM Page 41

SMA COAXIAL CONNECTORS

PANEL MOUNT/SOLDER POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132148 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 4 HOLE SQUARE FLANGE — BLUNT POST

132149 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 2 HOLE FLANGE — BLUNT POST

132150 N/A Gold Teflon 50 N/A

132204 N/A Gold Teflon 50 N/A

6.6 mm [.260"] POST

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQUARE FLANGE — BLUNT POST

132151 N/A Gold Teflon 50 N/A

132262 N/A Gold Teflon 50 N/A

8.37 mm [.330"] POST

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 2 HOLE FLANGE — BLUNT POST

SMA.4 11/27/01 5:06 PM Page 42

SMA COAXIAL CONNECTORS

PANEL MOUNT/SOLDER POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132152 N/A Gold Teflon 50 N/A

Remark: Size of slot width = 0.3 mm [.01"],

0.5 mm [.02"],

0.7 mm [.03"],

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 4-HOLE SQUARE FLANGE

132153 N/A Gold Teflon 50 N/A

Remark: Size of slot width = 0.3 mm [.01"],

0.5 mm [.02"],

0.7 mm [.03"],

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 2-HOLE FLANGE

132154 N/A Gold Teflon 50 N/A

132214 N/A Gold Teflon 50 N/A

12.7 mm [.500"] MOUNTING HOLES

Remark: Size of slot width = 0.3 mm [.01"],

0.5 mm [.02"],

0.7 mm [.03"],

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 4-HOLE SQUARE FLANGE

132155 N/A Gold Teflon 50 N/A

Remark: Size of slot width = 0.3 mm [.01"],

0.5 mm [.02"],

0.7 mm [.03"],

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 2-HOLE FLANGE

132154

SMA.4 11/27/01 5:06 PM Page 43

For Cable Group Legend, see page 27

132157 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

SMA COAXIAL CONNECTORS

132158 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132159 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT/HALF ROUND POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

PANEL MOUNT PLUG RECEPTACLE — 2 HOLE FLANGE — HALF ROUND TERMINAL

PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQUARE FLANGE — HALF ROUND TERMINAL

PANEL MOUNT JACK RECEPTACLE — 2 HOLE FLANGE — HALF ROUND TERMINAL

132156 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 4 HOLE SQUARE FLANGE — HALF ROUND TERMINAL

SMA.4 11/27/01 5:06 PM Page 44

For Cable Group Legend, see page 27

132161 N/A Gold Teflon 50 N/A

Remark: Pin size of d = .305 mm [.012"],

.381 mm [.015"],

.457 mm [.018"]

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

SMA COAXIAL CONNECTORS

132160 N/A Gold Teflon 50 N/A

Remark: Pin size of d = .305 mm [.012"],

.381 mm [.015"],

.457 mm [.018"]

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132162 N/A Gold Teflon 50 N/A

Remark: Pin size of d = .305 mm [.012"],

.381 mm [.015"],

.457 mm [.018"]

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

132163 N/A Gold Teflon 50 N/A

Remark: Pin size of d = .305 mm [.012"],

.381 mm [.015"],

.457 mm [.018"]

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT/TERMINALS FLUSH TO BELOW FLANGE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

PANEL MOUNT PLUG RECEPTACLE — 4 HOLE SQ. FLANGE — TERMINAL FLUSH TO BELOW FLANGE

PANEL MOUNT PLUG RECEPTACLE — 2 HOLE FLANGE — TERMINAL FLUSH TO BELOW FLANGE

PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQ. FLANGE — TERMINAL FLUSH TO BELOW FLANGE

PANEL MOUNT JACK RECEPTACLE — 2 HOLE FLANGE — TERMINAL FLUSH TO BELOW FLANGE

SMA.4 11/27/01 5:06 PM Page 45

132165 N/A Gold Teflon 50 N/A

Remark: Specify horizontal or vertical tab when ordering

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 2 HOLE FLANGE — TAB TERMINAL

SMA COAXIAL CONNECTORS

132164 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT PLUG RECEPTACLE — 4 HOLE SQUARE FLANGE — TAB TERMINAL

132166 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 4 HOLE SQUARE FLANGE — TAB TERMINAL

132167 N/A Gold Teflon 50 N/A

Remark: Specify horizontal or vertical tab when ordering

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL MOUNT JACK RECEPTACLE — 2 HOLE FLANGE — TAB TERMINAL

PANEL MOUNT/TAB TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

SMA.4 11/27/01 5:06 PM Page 46

132169 N/A Gold Teflon 50 N/A

132169SSN/A S/S Teflon 50 N/A

STAINLESS STEEL BODY

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK ADAPTER

SMA COAXIAL CONNECTORS

132168 N/A Gold Teflon 50 N/A

132168SSN/A S/S Teflon 50 N/A

STAINLESS STEEL BODY

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PLUG-TO-PLUG ADAPTER

132170 N/A Gold Teflon 50 N/A

132170-11

N/A Gold Teflon 50 N/A

O-RING SEAL

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK ADAPTER — BULKHEAD FEEDTHROUGH

132171 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PLUG-TO-JACK ADAPTER

MINIATURE IN-SERIES ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

SMA.4 11/27/01 5:06 PM Page 47

132216 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK-TO-JACK TEE ADAPTER

SMA COAXIAL CONNECTORS

132172 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PLUG-TO-JACK ADAPTER — RIGHT ANGLE

MINIATURE IN-SERIES ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

132274 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK ADAPTER — RIGHT ANGLE

132217 N/A Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-PLUG-TO-JACK TEE ADAPTER

SMA.4 11/27/01 5:06 PM Page 48

SMA COAXIAL CONNECTORS

ACCESSORIES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Reverse Threaded connecters, add RT to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 27

202112 N/A Gold Teflon 50 N/A

202112SSN/A S/S Teflon 50 N/A

STAINLESS STEEL

202112-10

N/A Gold Teflon 50 N/A

CAP & CHAIN

132331 N/A Gold Teflon 50 N/A

SHORTING CAP

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

MALE CAP

SMA.4 11/27/01 5:06 PM Page 49

SMA.4 11/27/01 5:06 PM Page 50