Q Simplify QLA2310F/2310FL Data Sheet 2-Gb Fibre Channel to PCI-X Host Bus Adapters Designed and deployed by major server and storage OEMs, QLogic's SANblade QLA2310F and QLA2310FL host bus adapters (HBAs) offer the high performance of 2-Gb Fibre Channel combined with 64-bit, 66-MHz PCI-X. These multimode optic HBAs are targeted for servers in direct attach storage (DAS) as well as storage area network (SAN) environments. For a cost-effective, optic solution for your SAN with the added performance of 2 Gb, the QLA2310F is the right solution. If you are looking for low-profile boards for 1U and 2U servers, the QLA2310FL, a low-profile MD2 compliant version of the QLA2310F, is the perfect fit. Driving the standard for interoperability with extensive Fibre Channel testing in SAN environments, you can feel confident in choosing the QLogic solution. Features FC2358003-00 A Unique, single-integrated Fibre Channel controller for added reliability and optimum performance Autonegotiation of Fibre Channel speed bit rate (1 Gb or 2 Gb) Automatic topology detection Concurrent support for SCSI and IP protocols Simultaneous initiator and target mode support Easy detection of activities through an LED panel: Power Online Signal acquired Loss of synchronization Firmware error HBA and LUN level failover Persistent binding LUN masking Local and remote management Load balancing for optimized performance Diagnostics Loop back test Read/write buffer tests 1 of 2 M Host Bus Interface Specifications Speed 64-bit, 66-MHz PCI-X Voltage 3.3 V and 5.0 V buses supported Compliance Conforms to PCI Local Bus Specification rev. 2.2, PCI-X Addendum rev. 1.0a, PCI Hot Plug Specification rev. 1.0, PCI Bus Power Management Interface Specification rev. 1.1 Speed 200 MBps maximum at half-duplex, 400 MBps maximum at full-duplex Compliance Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS) Topology FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port) Class of service Class 3 Fibre Channel service Protocol SCSI-FCP, IP, FC-TAPE Buffer credits For 512-byte frame size, 9 credits issued. For 2K-byte frame size, 3 credits issued. Ports One Media Multimode optic Optics Short wave laser Form factor Half size: 17.78 cmx10.67 cm (7.0"x4.2") (QLA2310F); Low-profile MD2: 16.93 cmx5.15 cm (6.7"x2.5") (QLA2310FL) Bracket size QLA2310F: standard size; QLA2310FL: low-profile size Connectors LC-style connector that supports non-OFC, multimode fibre optic cabling using a small form factor optical transceiver module Power consumption ~ 4.75 watts Airflow 0 lf/m Temperature Operating: 0C/32F to 55C/131F. Storage: -20C/-4F to 70C/158F Humidity Relative (noncondensing): 10% to 90%, Storage: 5% to 95% Distance 1 Gbps: 500 meters 50/125 m fiber, 300 meters 62.5/125 m fiber 2 Gbps: 300 meters 50/125 m fiber, 150 meters 62.5/125 m fiber Cable 50/125m multimode fiber, 62.5/125 m multimode fiber US/Canada UL, cUL UL1950 (QLA2310FL) UL60950 (QLA2310F) cUL C22.2 No.950 (QLA2310FL) CSA C22.2 No.60950 (QLA2310F) Class 1 Laser Product per DHHS 21CFR (J) Europe 73/23/ECC Low Voltage Directive: TUV: EN60950: 1992+A1,2,3,4,11 EN60825-1: 1994+A11 EN60825-2: 1994 Fibre Channel Specifications HBA Physical Specifications HBA Environment Agency Approvals--Product Safety Agency Approvals--EMI and EMC US Canada Europe Japan Taiwan New Zealand/ Australia Korea FCC Part 15, Class B Industry Canada ICES-003, Class B (QLA2310FL only) 89/336/EEC EMC Directive CE Mark: EN55022: 1995 Class B EN55024: 1998: EN61000-3-2:1995 EN61000-3-3:1994 VCCI, Class B CNS 13438 Class B BSMI AS/NZS 3548 Class B MIC Software SANblade Manager Easy to use, Java-based, configuration, diagnostics and analysis HBA management application for heterogeneous SAN management across multiple hosts. Includes failover, LUN masking, and persistent binding capabilities. SANblade Control FX Wizard-based utility provided for installation, configuration, persistent binding, and diagnostic functions on the local host. Operating System drivers Windows Server 2003 (32-bit and 64-bit), Windows NT, Windows 2000, Windows XP, Solaris SPARC, Linux (32-bit and 64-bit), Novell NetWare Flash utilities Configuration utilities resident with BIOS and FCode Boot support Intel x86: BIOS (32-bit), EFI (64-bit); Solaris SPARC: FCode QLA2310F Ships to OEMs in an individually packed box with a standard size bracket. QLA2310F-BK Ships to OEMs in a bulk pack box in quantities of 20, 50, or 100 with standard size brackets. QLA2310F-CK Ships to authorized distributors and resellers in an individually packed box with a standard size bracket and the SANsurfer Management Suite CD. QLA2310FL Ships to OEMs in an individually packed box with a low-profile size bracket. QLA2310FL-BK Ships to OEMs in a bulk pack box in quantities of 20, 50, or 100 with low-profile size brackets. QLA2310FL-CK Ships to authorized distributors and resellers in an individually packed box with a low-profile size bracket and the SANsurfer Management Suite CD. Ordering Information QLogic Corporation 26650 Aliso Viejo Parkway Aliso Viejo, CA 92656, (800) 662-4471 or (949) 389-6000 www.qlogic.com (c) 2003 QLogic Corporation. Specifications are subject to change without notice. All rights reserved worldwide.The QLogic logo, SANblade, SANsurfer, and SANtrack are trademarks of QLogic Corporation, which may be registered in some jurisdictions. All other brand and product names are trademarks or registered trademarks of their respective owners. 2 of 2 FC2358003-00 A