*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
CR0201 - Chip Resistor
Dimensional Drawings
Derating Curve
DIMENSIONS ARE: MM
(INCHES)
Features
Requires 64 % less space than 0402-
size resistor
Lead free
RoHS compliant*
Power rating at 70 °C = 1/20 W
Three layer termination process with
nickel barrier prevents leaching and
provides excellent solderability
Suitable for most types of soldering
processes
Standard packaging on paper tape and
reel
0.12 ± 0.05
(0.005 ± 0.002)
0.30 ± 0.03
(0.012 ± 0.001)
0.15 ± 0.05
(0.006 ± 0.002)
0.23 ± 0.03
(0.009 ± 0.001)
0.60 ± 0.03
(0.024 ± 0.001)
100
80
60
40
20
0
Rated power in percentage (%)
-55 070 125
Electrical Characteristics
Power Rating @ 70 °C.................1/20 W
Operating Temperature Range
.................................-55 °C to +125 °C
Derated to 0 Load at .................+125 °C
Maximum Working Voltage..............25 V
Maximum Overload Voltage ............50 V
Resistance Range
1 %, E-96 and E-24
..........................10 ohms to 1 megohm
5 %, E-24
..........................10 ohms to 1 megohm
Zero Ohm Jumper..............<0.05 ohms
Temperature Coefficient
1 % and 5 %...................±250 ppm/°C
.................................Zero Ohm Jumper
..............-200 ppm/°C to +500 ppm/°C
Overcoat
Resistor (Ru02)
(Jumper chip is
a conductor)
Alumina Substrate
Internal Electrode
Secondary Electrode (Nickel Plated)
External Electrode (Sn)
*RoHS COMPLIANT
How To Order
CR 0201 - F W - 8252 G LF
Model
(CR = Chip Resistor)
Size
0201
Resistance Tolerance
F = ±1 % ............For values from 10 ohms through 1 megohm.
J = ±5 % ..............For values from 10 ohms through 1 megohm, and for zero ohm jumper.
TCR (ppm/°C)
W = ±250 ..............Used with “F” and “J” Resistance Tolerance code for all values except zero ohm jumper.
/ = -250 to +500 ..Used with zero ohm jumper only.
Resistance Value
For 1 % Tolerance:
<100 ohms..............“R” designates decimal point (example: 24R3 = 24.3 ohms)
100 ohms..............First three digits are significant, fourth digit represents number of zeros to follow (example: 8252 = 82.5k ohms).
For 5 % Tolerance:
10 ohms................First two digits are significant, third digit represents number of zeros to follow (example: 474 = 470k ohms; 000 = Jumper).
Packaging
G = Paper Tape (15,000 pcs.) on 7 “ Plastic Reel
Termination
LF = Tin-plated (lead free)
For Standard Values Used in Capacitors,
Inductors, and Resistors, click here.
CR0201 - Chip Resistor
Packaging Dimensions (Conforms to EIA RS-481A)
DIMENSIONS ARE: MM
(INCHES)
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
1.5 + 0.1/-0
(0.059 + 0.004/-0)
4.0 ± 0.1
(0.157 ± 0.004)
0.68 ± 0.05
(0.027 ± 0.002)
0.38 ± 0.05
(0.015 ± 0.002)
0.27 ± 0.05
(0.011 ± 0.002)
2.0 ± 0.1
(0.079 ± 0.004)
Paper
(Punched)
3.5 ± 0.05
(0.138 ± 0.002)
1.75 ± 0.1
(0.069 ± 0.004)
8.0 ± 0.3
(0.315 ± 0.012)
Direction of Feeding
DIA.
20.5
(.807)
13.0 ± 0.5
(.512 ± .020)
2.0
(.080)
178.0 ± 2.0
(7.008 ± .080)
60.0 +1/-0
(2.362 +0.04/-0)
11.4 ± 1.1
(0.449 ± 0.043)
04/06
Part Marking System
No Marking on the CR0201 Chip
Resistors.
Soldering Profile for Lead Free Chip Resistors and Arrays
25
75
125
175
225
275
0 50 100 150 200 250 300
Time (seconds)
Temperature (°C)
60 - 120 seconds
60 - 90
seconds
260 °C peak
190 °C
150 °C
220 °C
Ramp Down
3 °C/second
255 °C
Maximum of 20 seconds between
+255 °C and +260 °C
Ramp Up
3 °C/second maximum
10 seconds minimum
<1>
<1>
Reliable Electronic Solutions
Asia-Pacific:
Tel: +886-2 2562-4117
Fax: +886-2 2562-4116
Europe:
Tel: +41-41 768 5555
Fax: +41-41 768 5510
The Americas:
Tel: +1-951 781-5500
Fax: +1-951 781-5700
www.bourns.com