Keysight Technologies
6000 Series Oscilloscopes
Lab Scope Performance at a Portable Scope Price
Data Sheet
Introduction
The standard for high-performance
portable scopes
A wide selection lets you choose the 6000 Series
model that best matches your needs.
Bring your toughest problems into focus with the
right combination of features and performance
If you work with analog, digital and serial circuitry, Keysight
Technologies, Inc. 6000 Series oscilloscopes give you the tools
you need for the fastest debug of your design.
Mixed signal oscilloscope (MSO) models and the traditional 2-
and 4-channel digital storage oscilloscope (DSO) models are
optimized with the capabilities you need for verifying and
debugging designs that include embedded serial,
microcontrollers, DSPs, FPGAs, ADCs and DACs.
Mixed analog and digital channel triggering and
analysis
– See all aspects of your design in one box – analog, digital and
serial
– Trigger across both slow analog and fast digital signals
Powerful applications suites available
– I2C, SPI and USB standard triggering and decode
– CAN, LIN and FlexRay triggering and decode
– Rapid Xilinx and Altera FPGA debug
Get superior insight into your design challenges with
integrated analog, digital and serial test.
The performance and problem solving tools you
need to more quickly debug your analog, digital
and serial design challenges, in a single
instrument.
– 100 MHz, 300 MHz, 500 MHz and 1 GHz bandwidths
– 2 or 4 analog channels
– Optional 16 digital channels
– MegaZoom III memory and display technology
– Up to 8 Mpts acquisition memory
– Up to 100,000 waveforms per second real-time update
rate
– High-denition XGA (1024 x 768) display with 256 levels of
intensity grading
– Up to 12 bits of vertical resolution, even in single-shot acqui-
sitions
– Complete connectivity – standard
– USB (3 ports)
– LAN
– GPIB
– XGA display out
– Full remote control, including web browser
– LXI Class C compliant
– Secure environment option
– Battery option
03 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Your design has analog, digital and serial signals,
shouldn’t your scope?
Analog: Up to 1 GHz bandwidth and up to 4 GSa/s sample rate
The 6000 Series analog channels provide faster identication of the most elusive
problems.
– Revolutionary high-resolution display. Engineered with a XGA display and 256 levels
of intensity (color grading), see a precise representation of the analog
characteristics of the signals you’re testing. Equipped with the industry’s fastest
update rate at 100,000 waveform/s update rate, you’ll capture and see infrequent
events.
– MegaZoom III technology. MegaZoom III responsive deep memory captures long,
non-repeating signals and maintains high sample rates, allowing you to quickly
zoom in on areas of interest. Sample rate and memory depth go hand-in-hand. Deep
memory in oscilloscopes sustains a high sample rate over longer time spans.
Digital: 16 digital timing channels with mixed signal triggering
Capture a mix of analog or digital signals. Compare multiple cycles of digital signals with
slower analog signals.
– 16 high-speed timing with up to 2 GSa/s deep memory timing. Use the timing
channels to evaluate control signal relationship. Or capture and view data buses up
to 16 bits wide. Display individual signals or bus waveforms in hex or binary.
– Mixed signal trigger. Trigger across any combination of analog and digital signals
simultaneously. See precise analog measurements timed with exact digital content,
all in one box.
– Applications for digital channels. Designing with Altera or Xilinx FPGAs? Use FPGA
dynamic probe for rapid internal FPGA measurements. Using I2C or SPI? Use the
digital signals from a 4-channel MSO to acquire and decode these serial buses.
Serial: Hardware-accelerated decode and trigger for I2C, SPI, CAN,
LIN and FlexRay
Capture long streams of serial data and gain fast insight into the problem. The Keysight
6000 Series oscilloscopes provide the best serial capabilities in its class.
– Serial bus triggering and decoding. Display responsive, on-screen decode of serial
bus trafc. Isolate specic events with pinpoint accuracy. Show decode to validate
serial bus activity in real-time.
– Hijack infrequent errors. Hardware-accelerated decoding increases your probability
of capturing elusive events. Keysight oscilloscopes can help you catch that
intermittent problem before it becomes an intermittent customer complaint or
quality concern.
– Easily capture enough serial data to see all of the details. Use deep memory to
capture serial data stream over a long period of time.
04 | Keysight | 6000 Series Oscilloscopes - Data Sheet
If you haven’t purchased an Keysight oscilloscope
lately, why should you consider one now?
Leading-edge technology
The 6000 Series oscilloscopes incorporate third generation MegaZoom III
technology blocks – responsive deep memory, fast update rates with minimal “dead
time” and analog-like display systems – and deliver them in a compact package.
Industry-leading customer support
As the world’s leading Test and Measurement vendor, Keysight maintains the largest
network of sales engineers, application engineers, support engineers and technicians.
From pre-sales collaboration, to calibration, to training and consulting, to repair and
servicing, Keysight stands with you throughout the life of your product. It’s no accident
that Keysight has such loyal customers.
Don’t take our word for it
Compare the 6000 Series with your current bench scope. Or compare it to one of our
competitors’ newest scopes. You’ll see why Keysight has been the fastest-growing
oscilloscope supplier since 2001 (source: Prime Data 2005 Test Instrument Industry
Service Market Share Analysis).
Model Bandwidth Maximum sample rate Memory depth Scope channels Logic channels
DSO6012A 100 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 2
MSO6012A 100 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 2 16
DSO6014A 100 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 4
MSO6014A 100 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 4 16
DSO6032A 300 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 2
MSO6032A 300 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 2 16
DSO6034A 300 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 4
MSO6034A 300 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 4 16
DSO6052A 500 MHz 4 GSa/s 2 Mpts, 8 Mpts optional 2
MSO6052A 500 MHz 4 GSa/s 2 Mpts, 8 Mpts optional 2 16
DSO6054A 500 MHz 4 GSa/s 2 Mpts, 8 Mpts optional 4
MSO6054A 500 MHz 4 GSa/s 2 Mpts, 8 Mpts optional 4 16
DSO6102A 1 GHz 4 GSa/s 2 Mpts, 8 Mpts optional 2
MSO6102A 1 GHz 4 GSa/s 2 Mpts, 8 Mpts optional 2 16
DSO6104A 1 GHz 4 GSa/s 2 Mpts, 8 Mpts optional 4
MSO6104A 1 GHz 4 GSa/s 2 Mpts, 8 Mpts optional 4 16
Start with:
–DSO
–2 Mpts standard
memory depth
Upgrade to:
–MSO
–8 Mpts deep
memory
User installable
Upgrade in 10 minutes
05 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Other nice features
High resolution mode
Offers up to 12 bits of vertical resolution in real-time, single-shot
mode. This is accomplished by serially ltering sequential data
points and mapping the ltered results to the display when
operating at base settings greater than 10-µs/div.
Help is at your ngertips
An embedded help system – available in six languages – gives
you quick answers if you don’t understand a feature. Simply press
and hold the corresponding front-panel key, and a screen pops up
to explain its function.
Waveform math with FFT
Analysis functions include subtract, multiply, integrate, and
differentiate, as well as Fast Fourier Transforms (FFT).
Peak detect
250 ps on 500-MHz models, 500 ps on 300-MHz models and 1 ns
on 100-MHz models helps you nd narrow glitches.
AutoProbe interface
Automatically sets probe attenuation factors and provides power
for selected Inniium active probes, including the award-winning
1130A 1.5-GHz InniiMax differential active probe and 1156A
1.5-GHz single-ended active probe systems.
5-digit hardware counter
Measures frequency up to the bandwidth of the scope.
Trig Out
Provides an easy way to synchronize your scope to other
instruments. Use the Trig Out port to connect your scope to a
frequency counter for more accurate frequency measurements or
to cross trigger other instruments.
Autoscale
Displays all active signals, and automatically sets the vertical,
horizontal and trigger controls.
23 automatic measurements
with QuickMeas
Pressing [QuickMeas] brings up the last four measurements
selected. Cursors automatically track the most recently selected
measurement.
HDTV trigger
The 6000 Series supports analog HDTV/EDTV triggering for
standards like 1080i, 1080p, 720p and 480p as well as standard
video triggering on any line within a eld, all lines, all elds, odd
or even elds for NTSC, SECAM, PAL and PAL-M video signals.
Serial triggering
Set up a serial bus trigger for I2C, SPI and USB.
Easy software upgrades
System software is stored in Flash ROM that can be upgraded
from the scope’s built-in USB port or LAN. You can nd the latest
system and IntuiLink Data Capture software at
www.keysight.com/nd/MSO6000sw.
Press and hold a key for instant help. FFT allows you to view the spectral content of
this unltered sine wave.
Display signals can be displayed individually or
as overlayed bus values.
06 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Why does deep memory matter?
See more time
This is the most easily understood use of deep memory. The more
samples that you acquire, the more time that you can see at a
particular sample rate.
Long capture times give you better visibility into cause-effect
relationships in your design, which greatly simplies root-cause
debugging. It also allows you to capture start-up events (like the
start-up sequence below) in a single acquisition.
You don’t have to stitch together multiple acquisitions or set
precise triggering conditions. Spend less time nding events, and
more time analyzing them.
See more details
The relationship between memory depth and acquisition rate
isn’t as obvious. All scopes have a “banner” maximum sample
rate specication, but many can only sustain these rates at a few
timebase settings.
In the case of an oscilloscope with a 5 GSa/s acquisition rate and
10 k of memory, those 10,000 points can only ll 2 Ms of time.
Since scopes have 10 time divisions, the sample rate drops at any
time setting below 200 ns/div.
As a result, if you look at “slow/fast” events like a modulated
signal, you run the risk of aliasing your signal. Or you may simply
miss out on important signal details when you zoom in on it.
Deep memory oscilloscopes let you sustain a high sample rate
over longer periods of time.
There is no better way to experience the superiority of the
new Keysight 6000 Series scopes than seeing one in action
on your bench to measure your signals yourself. We can
arrange for you to try out a new MSO6000A MSO. Contact
your nearest Keysight sales ofce or visit the MSO6000A
home page at www.keysight.com/nd/MSO6000. Contact
Keysight today to request an evaluation.
Always fast, always on
MegaZoom III is the third generation of the fast and deep memory
architecture that Keysight introduced in 1996. It’s not a special
mode, unlike other deep-memory oscilloscopes. You have access
to your MegaZoom memory at all times. And the display will
respond instantly to your commands as you scale the t/div
settings or pan and zoom in the Delayed (or “zoom”) window.
You can learn more about MegaZoom III deep memory in
Application Note 1446 - Deep Memory Oscilloscopes: The New
Tools of Choice.
07 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Why does a fast update rate matter?
This is a question that we hear frequently. If the human eye has
trouble discerning above 30-50 frames per second, is there really
a difference between 3,600 and 100,000 waveforms per second?
If you know what you’re looking for the answer is probably “no”.
However, if you are hunting for unknown signal anomalies or
characterizing jitter, the answer is “yes”.
If you know that there is a glitch in your system, it’s easy to
capture it using a pulse-width trigger. However, if you are just
browsing through your design, your chances of nding a glitch
increase as the update rate increases. If a glitch occurs during
the “dead time” between sample, you miss it. With MegaZoom III
technology, the dead time is much smaller. A scope with a slower
update rate will capture the glitch eventually (if it recurs), but
most engineers and technicians don’t have the time or patience to
wait for their tools to catch up.
If you are characterizing signal jitter, a fast update rate gives you
accurate results sooner. And when the fast update rate is
combined with the 6000 Series’ XGA high-denition display (1024
x 768, 256 intensity levels), subtle differences in these
acquisitions become obvious.
And like all other aspects of MegaZoom III technology, this is a
real-time acquisition mode. It’s always fast, always on.
Learn more about the benets of a fast update rate by reading
Application Note 1551 - Improve Your Ability to Capture Elusive
Events: Why Oscilloscope Waveform Update Rates are Important.
Acquisition time Dead time Acquisition time Dead time
Reducing the dead time between acquisitions …
… improves your chances of nding random events like glitches.
100000
10000
1000
100
10
1
0.1
1 ns/div 5 ns/div 20 ns/div100 ns/div500 ns/div 2 µs/div 10 µs/div 50 µs/div
MSO6000 TDS3000 WaveSurfer TDS5000
Update Rate (Waveforms/Sec)
Time base
Comparison of waveform update rates using each scope’s default real-time acquisition mode.
Catch problems sooner and
cover more of your debug
checklist – our 100,000
waveform per second update
rate helps you nd
intermittent problems faster
than comparable scopes.
08 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Connectivity
Our customers tell us that oscilloscope connectivity is an
increasingly important feature of their test instruments. That’s
why the 6000 Series scopes come with the most comprehensive
hardware and software connectivity tools in their class.
Hardware connectivity
Standard ports include:
– 2 x USB host ports (for external storage and printing devices),
one on the front and one on the rear
– 1 x USB device port for high-speed PC connectivity
– 10/100 Mbit LAN for Internet/Intranet connectivity
– GPIB to allow easy migration into existing test systems
– XGA Out for external monitors and projectors
LXI Class C
LAN eXtensions for Instrumentation (LXI) is a standards-based
architecture for test systems. By specifying the interaction of
system components, LXI enables fast and efcient test system
creation and reconguration. The 6000 Series oscilloscopes
follow specied LAN protocols, and adhere to LXI requirements
such as a built-in Web control server, IVI-COM driver, and
easy-to-use SCPI commands. The standard Keysight I/O Library
Suite makes it easy to congure and integrate instruments in your
system.
IntuiLink toolbars
IntuilLink gives you a quick way to move screen shots and data
into Microsoft® Word and Excel. These toolbars can be installed
from www.keysight.com/nd/intuilink.
Scope View logic analyzer and oscilloscope
correlation
Scope View enables simple time-correlated measurements
between a 6000 Series oscilloscope and an Keysight 1680/90
or 16800/900 logic analyzer. Scope and logic waveforms are
integrated into a single logic analyzer waveform display for easy
viewing analysis – all with a simple point-to-point LAN
connection. You can also cross-trigger the instruments,
automatically de-skew the waveforms, and maintain marker
tracking between the instruments.
Keysight Remote Front Panel running in a web browser
Make time-correlated
measurements between an
Keysight logic analyzer and
6000 Series oscilloscope.
Rear panel inputs/outputs.
An XGA video output port allows you to
connect to a large external monitor.
Standard USB, LAN and GPIB ports
provide PC and printer connectivity.
Built-in 10-MHz reference in/out port lets you synchronize multiple
measurement instruments in a system.
Trig Out port provides an easy way to synchronize your
scope to other instruments.
09 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Probes and accessories
Keysight offers a complete family of innovative passive and active
probes for the 6000 Series scopes to get your job done easily.
For more comprehensive information, refer to the Keysight 6000
Series Oscilloscopes Probes and Accessories Data Sheet and
Selection Guide (Keysight publication number 5968-8153EN/
ENUS and/or 5989-6162EN. Or for more information please visit
our web site at www.keysight.com/nd/scopes_probes.
Selection guide
10070C 10074C
(shipped with
100 MHz models)
10073C
(shipped with
300 MHz to 1 GHz models)
10076A
high-voltage probe
N2771A
high-voltage probe
Probe bandwidth 20 MHz 150 MHz 500 MHz 250 MHz 50 MHz
Probe rise time (calculated) < 17.5 ns < 2.33 ns < 700 ps < 1.4 ns < 7 ns
Attenuation ratio 1:1 10:1 10:1 100:1 1000:1
Input resistance (when
terminated into 1 MΩ)
1 MΩ 10 MΩ 2.2 MΩ 66.7 MΩ 100 MΩ
Input capacitance Approx. 70 pF Approx. 15 pF Approx. 12 pF Approx. 3 pF Approx. 1 pF
Maximum input
(dc+peak ac)
400 Vpk CAT I
(mains isolated)
400 Vpk CAT II
(post receptacle
mains)
500 Vpk CAT I
(mains isolated)
400 Vpk CAT II
(post receptacle
mains)
500 Vpk CAT I
(mains isolated)
400 Vpk CAT II
(post receptacle
mains)
4000 Vpk 15 kV dc, 10 kVrms,
30 kV dc + peak ac
Compensation range None 9-17 pF 6-15 pF 6-20 pF 7-25 pF
Probe sense No Yes Yes Yes No
Note: These Inniium active probes are not supported by 6000 Series 300 MHz to 1 GHz models – 1152A, 11 53A, 1 154A, 1 155A, 11 59A, 11 68A, and 11 69A.
The 6000 Series 100 MHz models do not support any Keysight Inniium active probes with AutoProbe interface.
Accessories
Options Description
N2916A Rackmount Kit
1180CZ Testmobile scope cart
N2917A Transit case
N2919A Testmobile bracket for 1180CZ and 6000
10833A GPIB cable, 1 m long
ABA Printed users guide in English
ABJ Printed users guide in Japanese
AB2 Printed users guide in simplied Chinese
10 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Software applications
FPGA dynamic probe (N5406A for Xilinx, N5434A for Altera)
Give your MSO internal FPGA visibility. Keysight’s MSO FPGA dynamic probe provides
internal FPGA visibility and quick instrument setup using an innovative core-assisted
debug approach. Measurement tasks that previously took hours can be done in a few
mouse clicks. In a few seconds, easily measure a different set of internal signals without
changing your FPGA design.
For more information:
www.keysight.com/nd/6000-altera
www.keysight.com/nd/6000-xilinx
Vector signal analysis
Expand the measurement capability of your 6000 Series scope with the 89601A vector
signal analysis software. This advanced DSP based software takes the digitized signal
data provided by the scope and provides FFT based spectrum analysis and wide
bandwidth digital modulation analysis. Use these capabilities to demodulate wireless
communication signals like WCDMA and cdma2000, and wireless networking signals
like 802.11 WiFi and 802.16 WiMax. Take advantage of the super wide bandwidth of your
scope to capture and evaluate radar signals.
For more information:
www.keysight.com/nd/6000-vsa
I2C/SPI serial trigger and decode (N5423A or Option LSS on new
scope purchases)
This application displays real-time time-aligned decode of I2C and SPI serial buses.
Hardware-assisted triggering and decode provide the industries fastest throughput and
update rate. Hardware-assisted triggering and decode guarantees you will never miss an
trigger event or anomaly – unlike other scopes that have triggering dead time between
acquisitions.
This application requires a 4-channel DSO or 4-channel MSO and can use any
combination of the scope or logic acquisition channels.
For more information:
www.keysight.com/nd/I2C-SPI
Debug and validate your FPGA designs faster and
more effectively with FPGA dynamic probe and
Keysight MSO.
The E2690B oscilloscope tools make it easy for
in-depth analysis of the captured signals.
On-screen serial decode of an I2C packet.
11 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Software applications (continued)
CAN/LIN triggering and decode (N5424A or Option AMS on new
scope purchases)
Trigger on and decode serially transmitted data based on CAN and LIN protocols. This
application not only provides triggering on complex serial signals, but also provides
unique hardware-accelerated decode capabilities. Hardware-assisted triggering and
decode guarantees you will never miss an trigger event or anomaly – unlike other scopes
that have triggering dead time between acquisitions.
This application requires a 4-channel DSO or 4-channel MSO and can use any
combination of scope or logic acquisition channels.
For more information:
www.keysight.com/nd/CAN-LIN
FlexRay triggering and decode (N5432A or Option FRS on new
scope purchases)
FlexRay protocol is based on time-triggered and deterministic architecture. Keysight’s
FlexRay solution for the 6000 Series mixed signal oscilloscopes offers a robust set of
FlexRay frame, slot, and error triggering, including the ability to trigger on specic FlexRay
communications qualied on base-cycle and cycle-repetition. This solution combines a
Keysight 6000 Series mixed signal oscilloscope (MSO) with a DECOMSYS::BUSDOCTOR 2
protocol analyzer.
For more information:
www.keysight.com/nd/exray
Random errors observed in CAN decode while
triggering on data frame ID: 07FHEX.
Mixed-signal measurements in a FlexRay system
using an MSO.
12 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Keysight 6000 Series oscilloscopes: The
right combination of features and
performance to bring your toughest
analog, digital and serial problems into
focus.
MegaZoom III deep memory helps you determine how your signals
are impacting each other. With shallow memory scopes, you have
to choose whether you look at a slow analog signal or fast digital
content. With up to 8 Mpts deep memory, you don’t have to
choose – capture all of your data at once.
Revolutionary high-resolution color display with XGA resolution
and 256 levels of intensity reveals subtle details that most scopes
won’t show you.
Built-in USB port makes it easy to save your work and update
your system software quickly.
Intensity knob allows you to see the right level of waveform detail,
just like an analog scope.
Free IntuiLink Data Capture PC software makes transferring
waveform data or screen image to a PC fast and easy.
13 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Built-in storage compartment allows you to
store probes and power cord for easy access
and transportation.
Autoscale lets you quickly display any active signals,
automatically setting the vertical, horizontal and
trigger controls for the best display, while optimizing
memory.
Dedicated front-panel controls make it easy to access
the most common scope controls, including vertical
and horizontal scaling.
Quickly pan and zoom for analysis with MegaZoom III’s instant
response and
optimum resolution.
QuickMeas shows up to four automated measurements with the
push of a button.
QuickPrint automatically prints your screen or saves screen
images to a connected USB storage device with automated le
names.
Standard serial triggering includes I2C, SPI, and USB (optional
CAN/LIN and FlexRay advanced triggering and decode).
Standard analog HDTV/EDTV triggering supports triggering on
1080i, 1080p, 720p, 480p HDTV/EDTV standards.
AutoProbe interface automatically congures the attenuation
ratio of the probe and provides probe power for Keysight’s active
probes (available on 300 MHz to 1 GHz models only).
Built-in help in six languages. Simply press and hold the front-
panel key of interest for a few seconds, and a help screen pops up
to explain its function.
Maximum sample rate and resolution is achieved on every
measurement. The scope automatically adjusts memory depth
as you use it, so you get maximum sample rate and resolution on
every measurement. You don’t even have to think about it.
2 or 4 scope and 16 logic channel MSOs allow you to view and
trigger on up to 20 time-aligned signals on your scope screen.
14 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Accessories
Battery option (Option BAT – factory installed)
Keysight 6000 Series oscilloscopes provide an optional internal rechargeable lithium ion
battery that will enable 2+ hours without line power. Specically designed for applications
where line power is not available or where you need to take your scope with you but you
need more power than a handheld scopemeter provides. New oscilloscopes equipped with
this option can also be operated off of the N5429A 12-V automotive adapter. The Keysight
6000 Series oscilloscopes offer the only high-performance scope with battery option on
the market.
For more information:
www.keysight.com/nd/6000_BAT
Evaluation kit (N2918A)
The scope evaluation kit for 6000 Series MSOs provides signals to help you experience the
power of Keysight 6000 Series MSOs. The kit includes a variety of signals that demonstrate
MegaZoom III technology with its fast deep memory, superior waveform update rate, high
denition display and mixed analog, digital and serial signals debugging. Using this scope
evaluation kit along with the easy-to-follow user’s guide, you can quickly become familiar
with how to effectively use an MSO.
Secure environment mode (Option SEC or N5427A)
Option SEC – secure environment mode provides the highest level of security by ensuring
internal non-volatile memory is clear of all setup and trace settings in compliance with
National Industrial Security Program Operation Manual (NISPOM) Chapter 8 requirements.
When this option is installed, it will store setup and trace settings to internal volatile
memory only. Volatile memory will be cleared during the power off cycle of the instrument.
So you can move the instrument out of a secure area with condence.
For more information:
Option SEC or N5427A Secure Environment Mode Option for Keysight 6000 Series
Oscilloscopes Data Sheet (Keysight publication number 5989-5558EN).
The N2918A evaluation helps you experience the
power of Keysight 6000 MSO.
15 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Acquisition: scope channels
Sample rate MSO/DSO601xA/603xA: 2 GSa/sec each channel
MSO/DSO605xA/610xA: 4 GSa/sec half channel*, 2 GSa/sec each channel
Equivalent-time sample rate: 400 GSa/s (when real-time mode is turned off)
Standard 2 Mpts memory depth With logic channels turned off,
2 Mpts half channel*, 1 Mpts full channel
With logic channels turned on,
1.25 Mpts half channel*, 625 kpts full channel
Optional 8 Mpts memory depth With logic channels turned off,
Option 8ML or 8MH – 8 Mpts half channel*, 4 Mpts each channel
With logic channels turned on,
Option 8ML or 8MH – 5 Mpts half channel*, 2.5 Mpts each channel
Vertical resolution 8 bits
Peak detection MSO/DSO601xA: 1-ns peak detect
MSO/DSO603xA: 500-ps peak detect
MSO/DSO605xA/610xA: 250-ps peak detect
Averaging Selectable from 2, 4, 8, 16, 32, 64 … to 65536
High resolution mode Average mode with avg = 1
12 bits of resolution when ≥10 μs/div @ 4 GSa/s or ≥20‑μs/div @ 2 GSa/s
Filter Sinx/x interpolation (single shot BW = sample rate/4 or bandwidth of scope,
whichever is less) with vectors on and in real-time mode
Acquisition: logic channels (MSO6000A or MSO-upgraded DSO6000A only)
Sample rate 2 GSa/sec one pod, 1 GSa/sec each pod
Maximum input frequency 250 MHz
Standard 2 Mpts memory depth With scope channels turned off,
2 Mpts one pod, 1 Mpts each pod
With scope channels turned on,
625 kpts one pod, 312 kpts each pod
Optional 8 Mpts memory depth With scope channels turned off,
Option 8ML or 8MH – 8 Mpts one pod, 4 Mpts each pod
With scope channels turned on,
Option 8ML or 8MH – 2.5 Mpts one pod, 1.25 Mpts each pod
Vertical resolution 1 bit
Glitch detection 2 ns (min pulse width)
Performance characteristics
*Half channel is when only one of channel 1 or 2 is turned on, and only channel 3 or 4 is turned on.
16 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Vertical system: scope channels
Scope channels MSO/DSO6xx2A: Ch 1 and 2 simultaneous acquisition
MSO/DSO6xx4A: Ch 1, 2, 3 and 4 simultaneous acquisition
Bandwidth (–3dB)* MSO/DSO601xA: DC to 100 MHz
MSO/DSO603xA: DC to 300 MHz
MSO/DSO605xA: DC to 500 MHz
MSO/DSO610xA: DC to 1 GHz
AC coupled MSO/DSO601xA: 3.5 Hz to 100 MHz
MSO/DSO603xA: 3.5 Hz to 300 MHz
MSO/DSO605xA: 3.5 Hz to 500 MHz
MSO/DSO610xA: 3.5 Hz to 1 GHz
Calculated rise time (=0.35/bandwidth) MSO/DSO601xA: 3.5 nsec
MSO/DSO603xA: 1.17 nsec
MSO/DSO605xA: 700 psec
MSO/DSO610xA: 350 psec
Single-shot bandwidth MSO/DSO601xA: 100 MHz
MSO/DSO603xA: 300 MHz
MSO/DSO605xA: 500 MHz
MSO/DSO610xA: 1 GHz (in half-channel mode)
Range1 MSO/DSO601xA: 1 mV/div to 5 V/div (1 MΩ)
MSO/DSO603xA and MSO/DSO605xA: 2 mV/div to 5 V/div (1 MΩ or 50 Ω)
MSO/DSO610xA: 2 mV/div to 5 V/div (1 MΩ), 2 mV/div to 1 V/div (50 Ω)
Maximum input CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6 kVpk
CAT II 100 Vrms, 400 Vpk
With 10073C or 10074C 10:1 probe: CAT I 500 Vpk, CAT II 400 Vpk
Offset range ±5 V on ranges <10 mV/div; ±20 V on ranges 10 mV/div to 200 mV/div;
±75 V on ranges >200 mV/div
Dynamic range ±8 div
Input impedance MSO/DSO601xA: 1 MΩ ± 1% || 11 pF
MSO/DSO603xA/605xA/610xA: 1 MΩ ± 1% || 14 pF or 50 Ω ± 1.5%, selectable
Coupling AC, DC
BW limit MSO/DSO601xA: 20 MHz selectable
MSO/DSO603xA/605xA/610xA: 25 MHz selectable
Channel-to-channel isolation DC to max bandwidth >40 dB
Standard probes MSO/DSO601xA: 10:1 10074C shipped standard for each scope channel
MSO/DSO603xA/605xA/610xA: 10:1 10073C shipped standard for each scope channel
Probe ID MSO/DSO601xA: Auto probe sense
MSO/DSO603xA/605xA/610xA: Auto probe sense and AutoProbe interface
Keysight- and Tektronix-compatible passive probe sense
Performance characteristics (continued)
* Denotes warranted specications, all others are typical. Specications are valid after a 30-minute warm-up period and ±10 °C from rmware calibration
temperature.
1. Half channel is when only one of channel 1 or 2 is turned on, and only channel 3 or 4 is turned on.
17 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Vertical system: scope channels (continued)
ESD tolerance ±2 kV
Noise peak-to-peak MSO/DSO601xA: 3% full scale or 2 mV, whichever is greater
MSO/DSO603xA: 3% full scale or 3 mV, whichever is greater
MSO/DSO605xA: 3% full scale or 3.6 mV, whichever is greater
MSO/DSO610xA: 3% full scale or 4 mV, whichever is greater
DC vertical gain accuracy*1±2.0% full scale
DC vertical offset accuracy ≤200 mV/div: ±0.1 div ±2.0 mV ±0.5% offset value;
>200 mV/div: ±0.1 div ±2.0 mV ±1.5% offset value
Single cursor accuracy1±{DC vertical gain accuracy + DC vertical offset accuracy + 0.2% full scale (~1/2 LSB)}
Example: for 50 mV signal, scope set to 10 mV/div (80 mV full scale), 5 mV offset,
accuracy = ±{2.0% (80 mV) + 0.1 (10 mV) + 2.0 mV + 0.5% (5 mV) + 0.2% (80 mV)} = ± 4.785 mV
Dual cursor accuracy*1±{DC vertical gain accuracy + 0.4% full scale (~1 LSB)}
Example: for 50 mV signal, scope set to 10 mV/div (80 mV full scale), 5 mV offset,
accuracy = ±{2.0% (80 mV) + 0.4% (80 mV)} = ±1.92 mV
Vertical system: logic channels (MSO6000A or MSO-upgraded DSO6000A only)
Number of channels 16 logic timing channels – labeled D15 - D0
Threshold groupings Pod 1: D7 - D0
Pod 2: D15 - D8
Threshold selections TTL, CMOS, ECL and user‑denable (selectable by pod)
User‑dened threshold range ±8.0 V in 10 mV increments
Maximum input voltage ±40 V peak CAT I; transient overvoltage 800 Vpk
Threshold accuracy* ±(100 mV + 3% of threshold setting)
Input dynamic range ±10 V about threshold
Minimum input voltage swing 500 mV peak-to-peak
Input capacitance ~8 pF
Input resistance 100 kΩ ±2% at probe tip
Channel-to-channel skew 2 ns typical, 3 ns maximum
Performance characteristics (continued)
* Denotes warranted specications, all others are typical. Specications are valid after a 30-minute warm-up period and ±10 °C from rmware calibration
temperature.
* Denotes warranted specications, all others are typical. Specications are valid after a 30-minute warm-up period and ±10 °C from rmware calibration
temperature.
1. 1 mV/div is a magnication of 2 mV/div setting for 100 MHz models and 2 mV/div is a magnication of 4 mV/div setting for 300 MHz to 1 GHz models. For
vertical accuracy calculations, use full scale of 16 mV for 1 mV/div sensitivity setting and 32 mV for 2 mV/div sensitivity setting.
18 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Horizontal
Range MSO/DSO601xA: 5 nsec/div to 50 sec/div
MSO/DSO603xA: 2 nsec/div to 50 sec/div
MSO/DSO605xA: 1 nsec/div to 50 sec/div
MSO/DSO610xA: 500 psec/div to 50 sec/div
Resolution 2.5 psec
Time base accuracy 15 ppm (±0.0015%)
Vernier 1‑2‑5 increments when off, ~25 minor increments between major settings when on
Delay range Pre-trigger (negative delay): Greater of 1 screen width or 1 ms (with 8 Mpts memory option)
Greater of 1 screen width or 250 μs (with 2 Mpts memory option)
Greater of 1 screen width or 125 μs (with standard memory)
Post-trigger (positive delay): 1 s to 500 seconds
Analog delta-t accuracy Same channel: ±0.0015% reading ±0.1% screen width ±20 ps
Channel‑to‑channel: ±0.0015% reading ±0.1% screen width ±40 ps
Same channel example (MSO/DSO605xA):
For signal with pulse width of 10 μs, scope set to 5 μs/div (50 μs screen width),
delta‑t accuracy = ±{0.0015% (10 μs) + 0.1% (50 μs) + 20 ps} = 50.17 ns
Logic delta-t accuracy Same channel: ±0.005% reading ±0.1% screen width ±(1 logic sample period, 1 ns)
Channel-to-channel:
±0.005% reading ±0.1% screen width ±(1 logic sample period) ±chan‑to‑chan skew
Same channel example:
For signal with pulse width of 10 μs, scope set to 5 μs/div (50 μs screen width),
delta‑t accuracy = ±{0.005% (10 μs) + 0.1% (50 μs) + 1 ns} = 51.5 ns
Modes Main, delayed, roll, XY
XY Bandwidth: Max bandwidth
Phase error @ 1 MHz: <0.5 degrees
Z Blanking: 1.4 V blanks trace (use external trigger on MSO/DSO6xx2A,
channel 4 on MSO/DSO6xx4A)
Reference positions Left, center, right
Trigger system
Sources MSO6xx2A: Ch 1, 2, line, ext, D15 - D0
DSO6xx2A: Ch 1, 2, line, ext
MSO6xx4A: Ch 1, 2, 3, 4, line, ext, D15 - D0
DSO6xx4A: Ch 1, 2, 3, 4, line, ext
Modes Auto, Normal (triggered), single
Holdoff time ~60 ns to 10 seconds
Trigger jitter 15 ps rms
Performance characteristics (continued)
19 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Trigger system (continued)
Selections Edge, pulse width, pattern, TV, duration, sequence, CAN, LIN, FlexRay, USB, I2C, SPI, Nth edge burst
Edge Trigger on a rising, falling, alternating or either edge of any source
Pattern Trigger at the beginning of a pattern of high, low, and don’t care levels and/or a rising or falling edge
established across any of the analog and digital channels, but only after a pattern has stabilized for a
minimum of 2 nsec.
The scope channel’s high or low level is dened by that channel’s trigger level. The logic channel’s
trigger level is dened by the threshold for the pod, 0 ‑ 7 or 8 ‑ 15.
Pulse width Trigger when a positive‑ or negative‑going pulse is less than, greater than, or within a specied range on
any of the source channels.
Minimum pulse width setting: 5 ns (MSO/DSO601xA/603xA scope channels)
2 ns (MSO/DSO605xA/610xA scope channels)
2 ns (logic channels on MSO6000A or
MSO-upgraded DSO6000A)
Maximum pulse width setting: 10 s
TV Trigger using any scope channel on most analog progressive and interlaced video standards including
HDTV/EDTV, NTSC, PAL, PAL-M or SECAM broadcast standards. Select either positive or negative sync
pulse polarity. Modes supported include Field 1, Field 2, all elds, all lines, or any line within a eld. TV
trigger sensitivity: 0.5 division of sync signal. Trigger holdoff time can be adjusted in half eld
increments.
Sequence Arm on event A, trigger on event B, with option to reset on event C or time delay.
CAN Trigger on CAN (Controller Area Network) version 2.0A and 2.0B signals. Trigger on the start of frame
(SOF) bit (standard). N5424A option supports triggering on remote frame ID (RTR), data frame ID (~RTR),
remote or data frame ID, data frame ID and data, error frame, all errors, acknowledge error and overload
frame.
LIN Trigger on LIN (Local Interconnect Network) sync break at beginning of message frame (standard).
N5424A option supports triggering on frame ID.
FlexRay N5432A option supports trigger on FlexRay frame ID or time slot or specic error condition, along with
cycle‑base and repetition‑cycle ltering.
USB Trigger on USB (Universal Serial Bus) start of packet, end of packet, reset complete, enter suspend, or
exit suspend on the differential USB data lines. USB low speed and full speed are supported.
I2C Trigger on I2C (Inter‑IC bus) serial protocol at a start/stop condition or user dened frame with address
and/or data values. Also trigger on missing acknowledge, address with no acq, restart, EEPROM read,
and 10-bit write.
SPI Trigger on SPI (Serial Protocol Interface) data pattern during a specic framing period. Supports positive
and negative Chip Select framing as well as clock Idle framing and user‑specied number of bits per
frame.
Duration Trigger on a multi-channel pattern whose time duration is less than a value, greater than a value, greater
than a time value with a timeout, or inside or outside of a set of time values.
Minimum duration setting: 2 ns
Maximum duration setting: 10 s
Nth edge burst Trigger on the Nth edge of a burst that occurs after an idle time that you specify. Max edge count:
65,536.
Performance characteristics (continued)
20 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Trigger system (continued)
Autoscale Finds and displays all active scope and logic (for MSO6000A series MSO) channels, sets edge trigger
mode on highest-numbered channel, sets vertical sensitivity on scope channels and thresholds on logic
channels, time base to display ~1.8 periods. Requires minimum voltage >10 mVpp, 0.5% duty cycle and
minimum frequency >50 Hz.
Scope channel triggering
Range (internal) ±6 div from center screen
Sensitivity* <10 mV/div: greater of 1 div or 5 mV; ≥10 mV/div: 0.6 div
Coupling AC (~3.5 Hz on MSO/DSO601xA, ~10 Hz on MSO/DSO603xA/605xA/610xA), DC, noise reject, HF reject
and LF reject (~50 kHz)
Logic (D15 - D0) channel triggering (MSO6000A or MSO-upgraded DSO6000A only)
Threshold range (user dened) ±8.0 V in 10 mV increments
Threshold accuracy* ±(100 mV + 3% of threshold setting)
Predened thresholds TTL = 1.4 V, CMOS = 2.5 V, ECL = –1.3 V
External (EXT) triggering MSO/DSO6xx2A (2-/2+16-ch models) MSO/DSO6xx4A (4-/4+16-ch models)
Input impedance MSO/DSO6012A: 1 MΩ ± 3% || 11 pF or 50 Ω
MSO/DSO6032A/6052A/6102A:
1 MΩ ± 3% || 14 pF or 50 Ω
MSO/DSO6014A: 1.015 kΩ ±5%
MSO/DSO6034A/6054A/6104A:
2.14 kΩ ±5%
Maximum input CAT I 300 Vrms, 400 Vpk, CAT II 100 Vrms,
400 Vpk
With 10073C 10:1 probe: CAT I 500 Vpk, CAT II
400 Vpk
5 Vrms with 50‑Ω input
±15 V
Range DC coupling: trigger level ±1 V and ±8 V ±5 V
Sensitivity For ±1 V range setting: DC to 100 MHz,
100 mV;
MSO/DSO6032A/6052A/6102A:
>100 MHz to bandwidth of oscilloscope: 200 mV
For ±8 V range setting: DC to 100 MHz, 250 mV;
MSO/DSO6032A/6052A/6102A:
>100 MHz to bandwidth of oscilloscope: 500 mV
MSO/DSO6014A:
DC to 100 MHz: 500 mV
MSO/DSO6034A/6054A/6104A:
DC to 500 MHz: 500 mV
Coupling AC (~3.5 Hz), DC, noise reject, HF reject and LF reject (~50 kHz)
Probe ID MSO/DSO601xA: Auto probe sense
MSO/DSO603xA/605xA/610xA: Auto probe sense and AutoProbe interface
Keysight- and Tektronix-compatible passive probe sense
Performance characteristics (continued)
* Denotes warranted specications, all others are typical. Specications are valid after a 30‑minute warm‑up period and ±10 °C from rmware calibration temperature.
21 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Display system
Display 6.3-inch (161 mm) diagonal color TFT LCD
Throughput of scope channels Up to 100,000 waveforms/sec in real-time mode
Resolution XGA – 768 vertical by 1024 horizontal points (screen area);
640 vertical by 1000 horizontal points (waveform area)
256 levels of intensity scale
Controls Waveform intensity on front panel. Vectors on/off; innite persistence on/off,
8 x 10 grid with intensity control
Built-in help system Key‑specic help (in English) displayed by pressing and holding key or softkey of interest
Real-time clock Time and date (user adjustable)
Measurement features
Automatic measurements Measurements are continuously updated. Cursors track last selected measurement.
Up to four measurements can be displayed on screen at any one time.
Voltage (scope channels only) Peak-to-peak, maximum, minimum, average, amplitude, top, base, overshoot, preshoot, RMS, standard
deviation (AC RMS)
Time Peak-to-peak, maximum, minimum, average, amplitude, top, base, overshoot, preshoot, RMS, standard
deviation (AC RMS)
Counter Built-in 5-digit frequency counter on any channel. Counts up to the scope’s bandwidth (1 GHz max). The
counter resolution can be increased to 8 digits with an external 10-MHz reference.
Threshold denition Variable by percent and absolute value; 10%, 50%, 90% default for time measurements
Cursors Manually or automatically placed readout of Horizontal (X, ΔX, 1/ΔX) and Vertical (Y, ΔY).
Additionally logic or scope channels can be displayed as binary or hex values.
Waveform math One function of 1-2, 1x2, FFT, differentiate, integrate.
Source of FFT, differentiate, integrate: scope channels 1 or 2, 1-2, 1+2, 1x2.
FFT
Points Fixed at 1000 points
Source of FFT Scope channels 1 or 2 (or 3 or 4 on MSO/DSO6xx4A only), 1+2, 1-2, 1*2
Window Rectangular, attop, hanning
Noise oor –50 to –90 dB depending on averaging
Amplitude Display in dBV, dBm at 50 Ω
Frequency resolution 0.05/time per div
Maximum frequency 50/time per div
Performance characteristics (continued)
22 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Storage
Save/recall (non-volatile) 10 setups and traces can be saved and recalled internally.
Optional secure environment mode ensures setups and traces are stored to internal volatile
memory so data is erased when power is removed. Compliant to NISPOM Chapter 8 requirements.
Storage type and format USB 1.1 host ports on front and rear panels
Image formats: BMP (8-bit), BMP (24-bit), PNG (24-bit)
Data formats: X and Y (time/voltage) values in CSV format, ASCII XY and binary format
Trace/setup formats: Recalled
I/O
Standard ports USB 2.0 high speed device, two USB 1.1 host ports, 10/100-BaseT LAN, IEEE488.2 GPIB, XGA video
output
Max transfer rate IEEE488.2 GPIB: 500 kbytes/sec
USB (USBTMC-USB488): 3.5 Mbytes/sec
100 Mbps LAN (TCP/IP): 1 Mbytes/sec
General characteristics
Physical size 35.4 cm wide x 18.8 cm high x 28.2 cm deep (without handle)
39.9 cm wide x 18.8 cm high x 28.2 cm deep (with handle)
Weight Net: 4.9 kgs (10.8 lbs) Shipping: 9.4 kgs (20.7 lbs)
Probe comp output Frequency ~2 kHz; Amplitude ~5 V
Trigger out When Triggers is selected (delay ~17 ns)
0 to 5 V into high impedance
0 to 2.5 V into 50 Ω
When Source Frequency or Source Frequency/8* is selected
0 to 580 mV into high impedance
0 to 290 mV into 50 Ω
Max frequency output: 350 MHz (in source frequency mode when terminated in 50 Ω)
125 MHz (in source frequency/8 mode when terminated in 50 Ω)
10 MHz ref in/out TTL out, 180 mV to 1 V amplitude with 0 to 2 V offset
Kensington lock Connection on rear panel for security
Performance characteristics (continued)
* Source Frequency/8 is supported on 300 MHz to 1 GHz 6000 Series only.
23 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Power requirements
Line voltage range ~Line 120 W max, 96‑144 V/48‑440 Hz, 192‑288 V/48‑66 Hz, automatic selection
Line frequency 50/60 Hz, 100-240 VAC; 440 Hz, 100-132 VAC
Power usage 110 W max
Battery option – BAT 2+ hours between charges, battery‑low indicator at 20%
Battery capacity after repeated charging: 80% after 300 cycles
Environmental characteristics
Ambient temperature Operating –10 °C to +55 °C; non‑operating –51 °C to +71 °C
Humidity Operating 95% RH at 40 °C for 24 hr; non‑operating 90% RH at 65 °C for 24 hr
Altitude Operating to 4,570 m (15,000 ft); non-operating to 15,244 m (50,000 ft)
Vibration Keysight class B1 and MIL-PRF-28800F; class 3 random
Shock Keysight class B1 and MIL-PRF-28800F; class 3 random; (operating 30g, 1/2 sine, 11 ms duration,
3 shocks/axis along major axis, total of 18 shocks)
Pollution degree2 Normally only dry non-conductive pollution occurs.
Occasionally a temporary conductivity caused by condensation must be expected.
Indoor use Rated for indoor use only
Other
Measurement categories CAT I: Mains isolated
CAT II: Line voltage in appliance and to wall outlet
Regulatory information Safety IEC 61010-1:2001 / EN 61010-1:2001
Canada: CSA C22.2 No. 1010.1:1992
UL 61010B-1:2003
Supplementary information The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the
EMC Directive 89/336/EEC, and carries the CE-marking accordingly.
The product was tested in a typical conguration with HP/Keysight test systems.
Performance characteristics (continued)
24 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Model Bandwidth Maximum sample rate Memory depth Scope channels Logic channels
DSO6012A 100 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 2
MSO6012A 100 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 2 16
DSO6014A 100 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 4
MSO6014A 100 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 4 16
DSO6032A 300 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 2
MSO6032A 300 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 2 16
DSO6034A 300 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 4
MSO6034A 300 MHz 2 GSa/s 2 Mpts, 8 Mpts optional 4 16
DSO6052A 500 MHz 4 GSa/s 2 Mpts, 8 Mpts optional 2
MSO6052A 500 MHz 4 GSa/s 2 Mpts, 8 Mpts optional 2 16
DSO6054A 500 MHz 4 GSa/s 2 Mpts, 8 Mpts optional 4
MSO6054A 500 MHz 4 GSa/s 2 Mpts, 8 Mpts optional 4 16
DSO6102A 1 GHz 4 GSa/s 2 Mpts, 8 Mpts optional 2
MSO6102A 1 GHz 4 GSa/s 2 Mpts, 8 Mpts optional 2 16
DSO6104A 1 GHz 4 GSa/s 2 Mpts, 8 Mpts optional 4
MSO6104A 1 GHz 4 GSa/s 2 Mpts, 8 Mpts optional 4 16
Ordering information
Accessories included:
Model number DSO600xA MSO600xA
User’s guide (localized), Service guide, Programmer’s guide
Power cord
10073C 10:1 divider passive probe with readout per scope channel
Front panel cover
Accessories storage
Keysight I/O libraries suite 14.2
16 channel ying lead set logic probe (two pods with eight channels each)
Standard 1-year warranty
Note: IntuiLink Data Capture software available free on web at www.keysight.com/nd/intuilink
25 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Ordering information
Product upgrades
DSO601xA
MSO601xA
DSO603xA
MSO603xA
DSO605xA
MSO605xA
DSO610xA
MSO610xA
8 Mpts memory upgrade
(Factory installed at time of initial scope purchase)
Option 8ML
Option 8MH Option 8MH
8 Mpts memory upgrade
(User installed, typically ordered after initial scope purchase)
N2911A
N2913A N2913A
DSO to MSO upgrade kit
(User installed, typically ordered after initial scope purchase)
N2914A*
N2915A* N2915A*
Rechargeable battery option
(Factory installed at time of initial scope purchase)
Option BAT Option Bat Option BAT
Secure environment mode option
(Factory installed at time of initial scope purchase)
Option SEC Option SEC Option SEC
Secure environment option
(User installed, can be installed by Keysight service center for
an additional charge)
N5427A N5427A N5427A
* Includes a 54620-68701 logic cable kit, a label and an upgrade license to activate the MSO features
Digital analysis applications
Option number – user installed Option number – factory installed Description
N5406A FPGA dynamic probe for Xilinx (MSO models only)
N5434A FPGA dynamic probe for Altera (MSO models only)
Serial data analysis applications
Option number – user installed Option number – factory installed Description
N5424A AMS CAN/LIN automotive triggering and decode
(4 and 4+16 channel models only)
N5423A LSS I2C/SPI serial decode option (for 4/4+16 channel
models only)
N5432A FRS FlexRay automotive triggering and decode
(4 and 4+16 channel models only)
26 | Keysight | 6000 Series Oscilloscopes - Data Sheet
Related Literature
Publication Title Publication Type Publication Number
Keysight Technologies Probes and Accessories Selection Guide 5989-6162EN
Keysight Technologies 6000 Series Oscilloscope Probes and Accessories Data Sheet 5968-8153EN/EUS
Serial Bus Triggering and Hardware-Accelerated Decode Options for Keysight 6000 Series
Oscilloscopes
Data Sheet 5989-5126EN
N5434A FPGA Dynamic Probe for Altera with 6000 Series MSOs Data Sheet 5989-5965EN
N5406A FPGA Dynamic Probe for Xilinx with 6000 Series MSOs Data Sheet 5989-1848EN
Improve Your Ability to Capture Elusive Events:
Why Oscilloscope Waveform Update Rates are Important
Application Note 1551 5989-2002EN
Debugging Embedded Mixed-Signal Designs Using Mixed Signal Oscilloscopes Application Note 1562 5989-3702EN
Oscilloscope Display Quality Impacts Ability to Uncover Signal Anomalies Application Note 1552 5989-2003EN
Application Note 1553 5989-2004EN
Deep Memory Oscilloscopes: The New Tools of Choice Application Note 1446 5988-9106EN
Evaluating Oscilloscope Vertical Noise Characteristics Application Note 1558 5989-3020EN
Using a Keysight 6000 Series MSO to Debug an Automotive CAN Bus Application Note 1576 5989-5049EN
Ten Things to Consider When Selecting Your Next Oscilloscope Application Note 1490 5989-0552EN
Keysight Technologies 6000 Series Brochure 5989-5806EN
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the
Web inside your test systems. Keysight is a founding member of the LXI
consortium.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s commitment to superior product quality and lower total cost
of ownership. The only test and measurement company with three-year
warranty standard on all instruments, worldwide.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to five years of protection and no budgetary surprises to ensure your
instruments are operating to specification so you can rely on accurate
measurements.
www.keysight.com/go/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada (877) 894 4414
Brazil 55 11 3351 7010
Mexico 001 800 254 2440
United States (800) 829 4444
Asia Pacic
Australia 1 800 629 485
China 800 810 0189
Hong Kong 800 938 693
India 1 800 112 929
Japan 0120 (421) 345
Korea 080 769 0800
Malaysia 1 800 888 848
Singapore 1 800 375 8100
Taiwan 0800 047 866
Other AP Countries (65) 6375 8100
Europe & Middle East
Austria 0800 001122
Belgium 0800 58580
Finland 0800 523252
France 0805 980333
Germany 0800 6270999
Ireland 1800 832700
Israel 1 809 343051
Italy 800 599100
Luxembourg +32 800 58580
Netherlands 0800 0233200
Russia 8800 5009286
Spain 800 000154
Sweden 0200 882255
Switzerland 0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
United Kingdom 0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-09-04-14)
27 | Keysight | 6000 Series Oscilloscopes - Data Sheet
This information is subject to change without notice.
© Keysight Technologies, 2007 - 2015
Published in USA, April 8, 2015
5989-2000EN
www.keysight.com
