PNP General Purpose Amplifier Collector 3 1 Base Features: * * * * * For general AF applications Complementary NPN type available BC817 High collector current High current gain Low collector-emitter saturation voltage PNP 2 Emitter Maximum Ratings Parameter Symbol Value Collector - Base Voltage VCBO -50 Collector - Emitter Voltage VCEO -45 Emitter - Base Voltage Vebo -5 IC -500 mA Total Device Dissipation PTOT 300 mW Thermal Resistance Junction to Ambient RJA 417 C/W Tj, Tstg -65 to +150 C Collector Current Continuous Junction and Storage Temperature Unit V www.element14.com www.farnell.com www.newark.com Page <1> 29/04/13 V1.0 PNP General Purpose Amplifier Electrical Characteristics (Ta = 25C unless otherwise noted) Parameter Symbol Test Conditions Min. Collector - Base Breakdown Voltage V(BR)CBO IC=-10A, IE=0 -50 Collector - Emitter Breakdown Voltage V(BR)CEO IC=-10mA, IB=0 -45 Emitter - Base Breakdown Voltage -5 Typ. Max. V V(BR)EBO IE=-1A, IC=0 Collector Cut-off Current ICBO VCB=-25V, IE=0 -0.1 Emitter Cut-off Current IEBO VCE=-4V, IE=0 -0.1 DC Current Gain VCE=-1V, IC=-100mA 100 100 160 250 hFE VCE=-1V, IC=-300mA 40 60 100 170 Collector - Emitter Saturation Voltage VCE(sat) IC=-500mA, IB=-50mA -0.7 Base - Emitter Saturation Voltage VBE(sat) IC=-500mA, IB=-50mA -1.2 Output Capacitance Cobo VCB=-10V, f=1MHz 10 Transition Frequency fT VCE=-5V, IC=-10mA f=100MHz DC Current Gain BC807 BC807-16 BC807-25 BC807-40 BC807 BC807-16 BC807-25 BC807-40 hFE Unit 160 250 350 200 A 600 250 400 600 V pF MHz Typical Characteristics: Ta=25C unless otherwise specified Ratings & Characteristic Curves Total power dissipation Ptot = f(TA*;TS) *Package mounted on epoxy Transition frequency fT = f(IC) VCE = 5V www.element14.com www.farnell.com www.newark.com Page <2> 29/04/13 V1.0 PNP General Purpose Amplifier Typical Characteristics: Ta=25C unless otherwise specified Ratings & Characteristic Curves Permissible pulse load Ptotmax / PtotDC = f(tp) Collector cutoff current ICBO = f(TA) VCBO = 25V Base-emitter saturation voltage IC = f(VBEsat), hFE = 10 Collector-emitter saturation voltage IC = f(VCEsat), hFE = 10 www.element14.com www.farnell.com www.newark.com Page <3> 29/04/13 V1.0 PNP General Purpose Amplifier Package Outline Plastic surface mounted package Dimensions Min. Max. A 2.5 2.95 B 1.25 1.35 C 1 Typical D 0.4 Typical E 0.35 0.48 G 1.85 1.95 H 0.02 0.1 J K 0.1 Typical 2.35 2.45 Dimensions : Millimetres Soldering Footprint Part Number Table Description Part Number BC807 Dimensions : Millimetres Transistor, PNP, 45V, 0.5A, SOT23 BC807-16 BC807-25 BC807-40 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <4> 29/04/13 V1.0