www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.029/04/13
PNP General Purpose Amplifier
Maximum Ratings
Features:
• For general AF applications
• Complementary NPN type available BC817
• High collector current
• High current gain
• Low collector-emitter saturation voltage
Parameter Symbol Value Unit
Collector - Base Voltage VCBO -50
V
Collector - Emitter Voltage VCEO -45
Emitter - Base Voltage Vebo -5
Collector Current Continuous IC-500 mA
Total Device Dissipation PTOT 300 mW
Thermal Resistance Junction to Ambient RθJA 417 °C/W
Junction and Storage Temperature Tj, Tstg -65 to +150 °C
Collector
3
1
Base
2
Emitter
PNP
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.029/04/13
PNP General Purpose Amplifier
Electrical Characteristics (Ta = 25°C unless otherwise noted)
Parameter Symbol Test Conditions Min. Typ. Max. Unit
Collector - Base Breakdown Voltage V(BR)CBO IC=-10μA, IE=0 -50
VCollector - Emitter Breakdown Voltage V(BR)CEO IC=-10mA, IB=0 -45
Emitter - Base Breakdown Voltage V(BR)EBO IE=-1μA, IC=0 -5
Collector Cut-off Current ICBO VCB=-25V, IE=0 -0.1 μA
Emitter Cut-off Current IEBO VCE=-4V, IE=0 -0.1
DC Current Gain BC807
BC807-16
BC807-25
BC807-40
hFE VCE=-1V, IC=-100mA
100
100
160
250
160
250
350
600
250
400
600
DC Current Gain BC807
BC807-16
BC807-25
BC807-40
hFE VCE=-1V, IC=-300mA
40
60
100
170
Collector - Emitter Saturation Voltage VCE(sat) IC=-500mA, IB=-50mA -0.7 V
Base - Emitter Saturation Voltage VBE(sat) IC=-500mA, IB=-50mA -1.2
Output Capacitance Cobo VCB=-10V, f=1MHz 10 pF
Transition Frequency fT
VCE=-5V, IC=-10mA
f=100MHz 200 MHz
Total power dissipation Ptot = f(TA*;TS)
*Package mounted on epoxy
Transition frequency fT = f(IC)
VCE = 5V
Typical Characteristics: Ta=25°C unless otherwise specied
Ratings & Characteristic Curves
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.029/04/13
PNP General Purpose Amplifier
Permissible pulse load
Ptotmax / PtotDC = f(tp)
Base-emitter saturation voltage
IC = f(VBEsat), hFE = 10
Collector-emitter saturation voltage
IC = f(VCEsat), hFE = 10
Collector cutoff current ICBO = f(TA)
VCBO = 25V
Typical Characteristics: Ta=25°C unless otherwise specied
Ratings & Characteristic Curves
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.029/04/13
PNP General Purpose Amplifier
Package Outline
Plastic surface mounted package
Dimensions : Millimetres
Dimensions : Millimetres
Dimensions Min. Max.
A 2.5 2.95
B 1.25 1.35
C1 Typical
D0.4 Typical
E 0.35 0.48
G 1.85 1.95
H 0.02 0.1
J0.1 Typical
K 2.35 2.45
Soldering Footprint
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Description Part Number
Transistor, PNP, 45V, 0.5A, SOT23
BC807
BC807-16
BC807-25
BC807-40
