4iee TH EWI) BY KINGSTOWN DESCRIPTION: Ty 7 veneen | 7 Ty | amen alia vere ey a vere nea KVR100X64C3/64 Memory Module Specification 100MHz SDRAM 168-Pin PC100 DIMM Memory Module This document describes ValueRAM's 8M x 64-bit (64M B), CAS Latency 3 (CL3) SDRAM (Synchronous DRAM) 100MHz memory module. The components on this module include eight 8M x 8-bit (2M = 8-bitx 4 Bank / PC100 components) SDRAM in TSOP packages. This 168-pin DIMM uses gold contact fingers and requires +3.3V. The electrical and mechanical specifications are as follows: FEATURES: CLE Cycle Time (tCC) Row Cycle Time (tR.C} CLE to Output (SAC) Single Power Supply of Power min. = 10ns (CAS Latency = 3) / max. = 1000ns 7Ons max. = 603 (CAS Latency = 3) AKA AAA A UL Rating +3.3V (H/- 3V) 2.772 W (operating) o4V -0 Note: The module defined in this data sheet is one of several configurations available under this part number. Vvhile all configurations are compatible, the DRAM combinaton andor ihe module height may vary from what is described here. However, in no configuration will the module height exceed 1.375" (34.82mm}. Linis = inches imilimeters| 5250 (133.220) oes a ong Bo a) O00) zr 350) l O17 ; ca Ud. OST + O0Re wag] | R200) ae Ee q i_- =f OUIeT + go004. _. (4000 4 0100) f 5 2 g 7 I 8 =t 2 bs T AS a ~ g\e SDA + 004 OA = -100] aay a2sy & (380) (6350) a o.360 Lisa zm ~ (S290) rn eS (54.61) 11.430} 4550 i557 Tr C ld L Figure 1: KV RIGOX64C3/64 168-Pin SDRAM Module Document No. VALUERAMO0043-001.600 O22 F02