LH0002 Buffer General Description Features The LH0002 is a general purpose buffer. Its features make it ideal to integrate with operational amplifiers inside a closed loop configuration to increase current output. The symmetrical output portion of the circuit also provides a low output impedance for both the positive and negative slopes of output pulses. The LH0002 is available in an 8-lead TO-99 can. The LH0002C is available in an 8-lead TO-99, and a 10-pin molded dual-in-line package. The LH0002 is specified for operation over the b55 C to a 125 C military temperature range. The LH0002C is specified for operation over the 0 C to a 85 C temperature range. Y Y Y Y Y Y Y Y Y High input impedance 400 kX Low output impedance 6X High power efficiency Low harmonic distortion DC to 30 MHz bandwidth Output voltage swing that approaches supply voltage 400 mA pulsed output current Slew rate is typically 200 V/ms Operation from g 5V to g 20V Applications Y Y Y Line driver 30 MHz buffer High speed D/A conversion Schematic and Connection Diagrams Dual-In-Line Package TL/H/5560 - 2 Order Number LH0002CN See NS Package Number N10A Metal Can Package TL/H/5560 - 1 Pin numbers in parentheses denote pin connections for dual-in-line package. TL/H/5560 - 3 Order Number LH0002H, LH0002H-MIL or LH0002CH LH0002H/883* See NS Package Number H08D *Available per SMD Y7801301 C1995 National Semiconductor Corporation TL/H/5560 RRD-B30M115/Printed in U. S. A. LH0002 Buffer February 1995 Absolute Maximum Ratings Operating Ratings (Note 3) (Note 3) Temperature Range LH0002 LH0002C If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. (Note 2) g 22V Supply Voltage Thermal Resistance (Note 5) iJA, H Package iJC, H Package iJA, N Package Power Dissipation (Note 4) 600 mW Input Voltage (Equal to Power Supply Voltage) b 65 C to a 150 C Storage Temperature Range Junction Temperature a 150 C N Package a 175 C H Package g 100 mA Steady State Output Current g 400 mA Pulsed Output Current (50 ms On/1 sec. Off) Lead Temperature Soldering (10 seconds) Metal Can Plastic b 55 C to a 125 C 0 C to a 85 C a 125 C/W a 75 C/W a 120 C/W 300 C 260 C ESD Rating (Note 6) 2 kV Electrical Characteristics (Note 1) Min Typ Voltage Gain Parameter RS e 10 kX, RL e 1.0 kX, VIN e g 10V Conditions 0.95 0.97 Input Impedance RS e 200 kX, VIN e g 1.0V, RL e 1.0 kX 180 400 Output Impedance VIN e g 1.0V, RL e 50X, RS e 10 kX Output Voltage Swing RL e 1.0 kX, VIN e g 12V g 10 Output Voltage Swing VS e g 15V, VIN e g 12V, RS e 50X, RL e 100X, TA e 25 C g 10 DC Output Offset Voltage RS e 300X, RL e 1.0 kX g 10 g 30 mV DC Input Bias Current RS e 10 kX, RL e 1.0 kX g 6.0 g 10 mA Harmonic Distortion VIN e 5.0 Vrms, f e 1.0 kHz 0.1 Rise Time RL e 50X, DVIN e 100 mV 7.0 12 ns Positive Supply Current RS e 10 kX, RL e 1.0 kX a 6.0 a 10 mA Negative Supply Current RS e 10 kX, RL e 1.0 kX b 6.0 b 10 mA 6.0 Max Units kX 10 g 11 X V V % Note 1: Specification applies for TA e 25 C with a 12V on Pins 1 and 2; b 12V on Pins 6 and 7 for the metal can package and a 12V on Pins 1 and 2; b 12V on Pins 4 and 5 for the dual-in-line package, unless otherwise specified. The parameter guarantees for LH0002C apply over the temperature range of 0 C to a 85 C, while parameters for the LH0002 are guaranteed over the temperature range b 55 C to a 125 C unless otherwise specified. Note 2: Refer to RETS0002X for LH0002 military specifications. Note 3: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Note 4: The maximum power dissipation is a function of maximum junction temperature (TJMax), total thermal resistance (iJA), and ambient temperature (TA). The maximum allowable power dissipation at any ambient is PD e (TJMax b TA)/iJA. Note 5: For operating at elevated temperatures, the device must be derated based on the thermal resistance iJA and TJMax. TJ e TA a PDiJA. Note 6: Human body model, 1.5 kX in series with 100 pF. 2 Typical Applications High Current Operational Amplifier TL/H/5560 - 4 Line Driver *Previously called NH0002/NH0002C TL/H/5560 - 5 Typical Performance Characteristics Frequency Response Input Impedance (Magnitude & Phase) Supply Current Positive Pulse Negative Pulse Input Bias Current TL/H/5560 - 7 3 4 Physical Dimensions inches (millimeters) Metal Can Package (H) Order Number LH0002H, LH0002H-MIL, LH0002H/883 or LH0002CH NS Package Number H08D 5 LH0002 Buffer Physical Dimensions inches (millimeters) (Continued) Molded Dual-In-Line Package (N) Order Number LH0002CN NS Package Number N10A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.