Click on Series name for product info on aimtec.com Series AM2DS-NZ 2 Watt | DC-DC Converter FEATURES: Unregulated High efficiency up to 86% 7 pin SIP package Operating temperature -40C to + 105C Continuous short circuit protection Pin compatible with multiple manufacturers 1500 & 3000VDC Isolation Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Cap Load (F) Efficiency (%) AM2DS-0503S-NZ AM2DS-0505S-NZ AM2DS-0509S-NZ AM2DS-0512S-NZ AM2DS-0515S-NZ AM2DS-0524S-NZ AM2DS-1203S-NZ AM2DS-1205S-NZ AM2DS-1209S-NZ AM2DS-1212S-NZ AM2DS-1215S-NZ AM2DS-1224S-NZ AM2DS-2403S-NZ AM2DS-2405S-NZ AM2DS-2412S-NZ AM2DS-2415S-NZ AM2DS-2424S-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 9 12 15 24 3.3 5 9 12 15 24 3.3 5 12 15 24 400 400 222 167 133 83 400 400 222 167 133 83 400 400 167 133 83 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 1500 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 84 84 86 84 84 84 80 80 86 84 84 83 80 84 86 84 85 AM2DS-0505SH30-NZ AM2DS-0512SH30-NZ AM2DS-0515SH30-NZ AM2DS-0524SH30-NZ AM2DS-1205SH30-NZ AM2DS-1212SH30-NZ AM2DS-1215SH30-NZ AM2DS-2405SH30-NZ AM2DS-2409SH30-NZ AM2DS-2412SH30-NZ AM2DS-2415SH30-NZ AM2DS-2424SH30-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 24 5 12 15 5 9 12 15 24 400 167 133 83 400 167 133 400 222 167 133 83 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 220 220 220 220 220 220 220 220 220 220 220 220 80 84 84 84 80 84 84 80 86 86 84 85 Model - Please note Aimtec product change announcement located here www.aimtec.com/news for product specification changes effective February 7th 2015. Models Dual output Model AM2DS-0505D-NZ AM2DS-0509D-NZ AM2DS-0512D-NZ AM2DS-0515D-NZ AM2DS-0524D-NZ AM2DS-1205D-NZ AM2DS-1209D-NZ AM2DS-1212D-NZ www.aimtec.com F 051e R12.B Input Voltage (V) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 Output Voltage (V) 5 9 12 15 24 5 9 12 Output Current max (mA) Isolation (VDC) Max Cap Load (F) Efficiency (%) 200 111 83 67 42 200 111 83 1500 1500 1500 1500 1500 1500 1500 1500 100 100 100 100 100 100 100 100 80 82 84 84 84 84 84 85 Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DS-NZ 2 Watt | DC-DC Converter Models Dual output (continued) Input Voltage (V) Model AM2DS-1215D-NZ AM2DS-1515D-NZ AM2DS-2405D-NZ AM2DS-2409D-NZ AM2DS-2412D-NZ AM2DS-2415D-NZ Output Voltage (V) 10.8-13.2 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 Output Current max (mA) Isolation (VDC) Max Cap Load (F) Efficiency (%) 67 67 200 111 83 67 1500 1500 1500 1500 1500 1500 100 100 100 100 100 100 84 85 84 84 84 84 15 15 5 9 12 15 AM2DS-0505DH30-NZ 4.5-5.5 5 200 3000 100 80 AM2DS-0509DH30-NZ 4.5-5.5 9 111 3000 100 82 AM2DS-0512DH30-NZ 4.5-5.5 12 83 3000 100 84 AM2DS-0515DH30-NZ 4.5-5.5 15 67 3000 100 84 AM2DS-0524DH30-NZ 4.5-5.5 24 42 3000 100 84 AM2DS-1205DH30-NZ 10.8-13.2 5 200 3000 100 84 AM2DS-1209DH30-NZ 10.8-13.2 9 111 3000 100 84 AM2DS-1212DH30-NZ 10.8-13.2 12 83 3000 100 85 AM2DS-1215DH30-NZ 10.8-13.2 15 67 3000 100 84 AM2DS-2405DH30-NZ 21.6-26.4 5 200 3000 100 84 AM2DS-2409DH30-NZ 21.6-26.4 9 111 3000 100 84 AM2DS-2412DH30-NZ 84 21.6-26.4 12 83 3000 100 AM2DS-2415DH30-NZ 21.6-26.4 15 67 3000 100 84 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Nominal Typical 5 12 15 24 Filter Absolute Maximum Rating (1 sec. max.) Maximum Units 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Capacitor VDC 5 12 15 24 9 18 21 30 15 Reflected Ripple Input Current VDC mA Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec 500VDC (100Khz/0.1V) Rated Units 1500, 3000 VDC MOhm pF > 1000 20 Output Specifications Conditions Typical Voltage accuracy Short Circuit protection Short circuit restart Parameters (see tolerance chart) Line voltage regulation For 1.0% change of Vin Load voltage regulation Temperature coefficient Ripple & Noise load 10~100% 5 Continuous Auto recovery 3.3V models 1.5 Others 1.2 12 0.03 75 www.aimtec.com F 051e R12.B 20MHz Bandwidth Tel: +1 514 620 2722 2 of 5 Maximum Units % % of Vin % %/oC mV p-p Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DS-NZ 2 Watt | DC-DC Converter General Specifications Parameters Conditions Typical Switching frequency Operating temperature Storage temperature Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature Maximum case temperature Cooling 100% load Derating Above 85oC 100 - 300 Maximum Units -40 to +105 -55 to +125 95 Non-conductive black plastic (UL94V-0 rated) 2.4 0.77 x 0.27 x 0.39inches 19.6 x 7.00 x 10.00mm >3,500,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) 1.5 mm from case for 10sec 300 125 Free air convection KHz oC oC % RH g oC oC Safety Specifications Parameters Agency approvals Standards cULus (without 15V input and without 3.3V output models) UL 60950-1 Pin Out Specifications Pin 1500 VDC Single + V Input - V Input - V Output No pin + V Output No pin 1 2 4 5 6 7 3000VDC Dual + V Input - V Input - V Output Common + V Output No pin Single + V Input - V Input No pin - V Output No pin + V Output Dual + V Input - V Input No pin - V Output Common + V Output Dimensions 19.60 (0.77) 7.00 (0.27) PRINTED FACE 10.0 (0.39) 0.50 (0.02) 10.0 (0.39) 4.10 (0.16) 2.54 (0.10) 15.20 (0.60) 0.50 (0.02) 7.00 (0.27) 0.50 (0.02) NOTE: Unit:mm [inch] Pin tolerances: 0.10mm [ 0.004inch] General tolerances: 0.25mm [ 0.010inch] 0.30 (0.01) 0.90 (0.04) www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DS-NZ 2 Watt | DC-DC Converter Typical characteristics Test Circuit Input Reflected Ripple Current& EMI Recommended Circuit Recommended Circuits to Lower Ripple & Noise Capacitor selection Table Vin C1 Single VDC 3.3 / 5 4.7 F 5V 12 2.2F 12 V 15 2.2F 15 V 24 1F 24 V Vin+ C2 10F 2.2F 1F 1 F Dual VDC 3.3 / 5V 12 V 15 V 24 V F 051e R12.B Vo+ C2/C3 C2 4.7 F 1 F 0.47 F 0.47 F 1) EnsureoutputloadofMin10%,orspecificationsmaynotbemet 2) Undernormaloperation,thereisnoprotectionforoverload condition 3) Convertermayexhibitstartupdelayifcapacitiveloadexceeds recommended 4) Ceramicorelectrolytictypecapacitorsarerecommended, tantalumtypemaydamageconverter 5) Parallelconnections,orhotswappingisnotrecommended www.aimtec.com Single C1 VinVo- Dual Vin+ Vo+ C2 Com C1 C3 Vin- Tel: +1 514 620 2722 4 of 5 Vo- Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DS-NZ 2 Watt | DC-DC Converter Derating NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12.B Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only