LM119,LM219,LM319 LM119/LM219/LM319 High Speed Dual Comparator Literature Number: SNOSBJ2A LM119/LM219/LM319 High Speed Dual Comparator General Description The LM119 series are precision high speed dual comparators fabricated on a single monolithic chip. They are designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Further, they have higher gain and lower input currents than devices like the LM710. The uncommitted collector of the output stage makes the LM119 compatible with RTL, DTL and TTL as well as capable of driving lamps and relays at currents up to 25 mA. The LM319A offers improved precision over the standard LM319, with tighter tolerances on offset voltage, offset current, and voltage gain. Although designed primarily for applications requiring operation from digital logic supplies, the LM119 series are fully specified for power supplies up to 15V. It features faster response than the LM111 at the expense of higher power dis- sipation. However, the high speed, wide operating voltage range and low package count make the LM119 much more versatile than older devices like the LM711. The LM119 is specified from -55C to +125C, the LM219 is specified from -25C to +85C, and the LM319A and LM319 are specified from 0C to +70C. Features n n n n n n n Two independent comparators Operates from a single 5V supply Typically 80 ns response time at 15V Minimum fan-out of 2 each side Maximum input current of 1 A over temperature Inputs and outputs can be isolated from system ground High common mode slew rate Connection Diagram Dual-In-Line Package Typical Applications (Note 2) Relay Driver DS005705-4 Top View Order Number LM119J, LM119J/883 (Note 1), LM219J, LM319J, LM319AM, LM319M, LM319AN or LM319N See NS Package Number J14A, M14A or N14A DS005705-5 Note 2: Pin numbers are for metal can package. Window Detector Note 1: Also available per SMD# 8601401 or JM38510/10306 DS005705-6 VOUT = 5V for VLT VIN VUT VOUT = 0 for VIN VLTor VIN VUT (c) 2000 National Semiconductor Corporation DS005705 www.national.com LM119/LM219/LM319 High Speed Dual Comparator August 2000 LM119/LM219/LM319 Absolute Maximum Ratings (Note 9) Lead Temperature (Soldering, 10 sec.) 260C Soldering Information Dual-In-Line Package Soldering (10 seconds) 260C Small Outline Package Vapor Phase (60 seconds) 215C Infrared (15 seconds) 220C See AN-450 "Surface Mounting Methods and Their Effect on Product Reliability" for other methods of soldering surface mount devices. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Total Supply Voltage Output to Negative Supply Voltage Ground to Negative Supply Voltage Ground to Positive Supply Voltage Differential Input Voltage Input Voltage (Note 3) ESD rating (1.5 k in series with 100 pF) Power Dissipation (Note 4) Output Short Circuit Duration Storage Temperature Range 36V 36V 25V 18V 5V 15V Operating Temperature Range 800V 500 mW 10 sec -65C to 150C LM119 LM219 -55C to 125C -25C to 85C Electrical Characteristics (Note 5) Parameter Conditions LM119/LM219 Min Units Typ Max Input Offset Voltage (Note 6) TA = 25C, RS 5k 0.7 4.0 mV Input Offset Current (Note 6) TA = 25C 30 75 nA 150 500 Input Bias Current TA = 25C Voltage Gain TA = 25C (Note 8) Response Time (Note 7) TA = 25C, VS = 15V Saturation Voltage 10 80 ns 0.75 1.5 V 0.2 2 A VIN 5 mV, VOUT = 35V TA = 25C Input Offset Voltage (Note 6) V/mV VIN -5 mV, IOUT = 25 mA TA = 25C Output Leakage Current nA 40 RS 5k 7 mV Input Offset Current (Note 6) 100 nA Input Bias Current 1000 nA Input Voltage Range VS = 15V -12 V+ = 5V, V- = 0 Saturation Voltage 13 1 +12 V 3 V 0.4 V V+ 4.5V, V- = 0 VIN -6 mV, ISINK 3.2 mA TA 0C 0.23 TA 0C Output Leakage Current VIN 5 mV, VOUT = 35V, 1 0.6 V 10 A V- = VGND = 0V 5 Differential Input Voltage V Positive Supply Current TA = 25C, V+ = 5V, V- = 0 Positive Supply Current TA = 25C, VS = 15V 8 11.5 mA Negative Supply Current TA = 25C, VS = 15V 3 4.5 mA 4.3 mA Note 3: For supply voltages less than 15V the absolute maximum input voltage is equal to the supply voltage. Note 4: The maximum junction temperature of the LM119 is 150C, while that of the LM219 is 110C. For operating at elevated temperatures, devices in the H10 package must be derated based on a thermal resistance of 160C/W, junction to ambient, or 19C/W, junction to case. The thermal resistance of the J14 and N14 packages is 100C/W, junction to ambient. Note 5: These specifications apply for VS = 15V, and the Ground pin at ground, and -55C TA +125C, unless otherwise stated. With the LM219, however, all temperature specifications are limited to -25C TA +85C. The offset voltage, offset current and bias current specifications apply for any supply voltage from a single 5V supply up to 15V supplies. Do not operate the device with more than 16V from ground to VS. Note 6: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply with a 1 mA load. Thus, these parameters define an error band and take into account the worst case effects of voltage gain and input impedance. Note 7: The response time specified (see definitions) is for a 100 mV input step with 5 mV overdrive. Note 8: Output is pulled up to 15V through a 1.4 k resistor. Note 9: Refer to RETS119X for LM119H/883 and LM119J/883 specifications. www.national.com 2 Storage Temperature Range -65C to 150C Lead Temperature (Soldering, 10 sec.) 260C Soldering Information Dual-In-Line Package Soldering (10 sec.) 260C Small Outline Package Vapor Phase (60 sec.) 215C Infrared (15 sec.) 220C See AN-450 "Surface Mounting Methods and Their Effect on Product Reliability" for other methods of soldering surface mount devices. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Total Supply Voltage Output to Negative Supply Voltage Ground to Negative Supply Voltage Ground to Positive Supply Voltage Differential Input Voltage Input Voltage (Note 10) Power Dissipation (Note 11) Output Short Circuit Duration ESD rating (1.5 k in series with 100 pF) 36V 36V 25V 18V 5V 15V 500 mW 10 sec Operating Temperature Range LM319A, LM319 0C to 70C 800V Electrical Characteristics (Note 12) Parameter Conditions LM319A Min LM319 Typ Max Input Offset Voltage (Note 13) TA = 25C, RS 5k 0.5 1.0 2.0 8.0 mV Input Offset Current (Note 13) TA = 25C 20 40 80 200 nA Input Bias Current TA = 25C 150 500 250 1000 Voltage Gain TA = 25C (Note 15) 20 Response Time (Note 14) TA = 25C, VS = 15V Saturation Voltage VIN -10 mV, IOUT = 25 mA Typ Max nA 40 V/mV 80 ns 0.75 1.5 0.75 1.5 V 0.2 10 0.2 10 A mV VIN 10 mV, VOUT = 35V, V- Input Offset Voltage (Note 13) 8 80 TA = 25C Output Leakage Current 40 Min Units = V GND = 0V, TA = 25C RS 5k 10 10 Input Offset Current (Note 13) 300 300 nA Input Bias Current 1000 1200 nA 3 V 0.4 V Input Voltage Range VS = 15V + 13 - V = 5V, V = 0 Saturation Voltage 13 1 V+ 4.5V, V- = 0 3 0.3 0.4 1 0.3 V VIN -10 mV, ISINK 3.2 mA 5 Differential Input Voltage 5 V Positive Supply Current TA = 25C, V+ = 5V, V- = 0 Positive Supply Current TA = 25C, VS = 15V 8 12.5 8 12.5 mA Negative Supply Current TA = 25C, VS = 15V 3 5 3 5 mA 4.3 4.3 mA Note 10: For supply voltages less than 15 the absolute maximum input voltage is equal to the supply voltage. Note 11: The maximum junction temperature of the LM319A and LM319 is 85C. For operating at elevated temperatures, devices in the H10 package must be derated based on a thermal resistance of 160C/W, junction to ambient, or 19C/W, junction to case. The thermal resistance of the N14 and J14 package is 100C/W, junction to ambient. The thermal resistance of the M14 package is 115C/W, junction to ambient. Note 12: These specifications apply for VS = 15V, and 0C TA 70C, unless otherwise stated. The offset voltage, offset current and bias current specifications apply for any supply voltage from a single 5V supply up to 15V supplies. Do not operate the device with more than 16V from ground to VS. Note 13: The offset voltages and offset currents given are the maximum values required to drive the output within a volt of either supply with a 1 mA load. Thus, these parameters define an error band and take into account the worst case effects of voltage gain and input impedance. Note 14: The response time specified is for a 100 mV input step with 5 mV overdrive. Note 15: Output is pulled up to 15V through a 1.4 k resistor. 3 www.national.com LM119/LM219/LM319 Absolute Maximum Ratings LM319A/319 (Note 9) LM119/LM219/LM319 Typical Performance Characteristics Input Currents LM119A/LM119/LM219 Common Mode Limits DS005705-10 Response Time for Various Input Overdrives Transfer Function DS005705-11 Response Time for Various Input Overdrives DS005705-12 Input Characteristics DS005705-15 DS005705-14 DS005705-13 Response Time for Various Input Overdrives Response Time for Various Input Overdrives Output Saturation Voltage DS005705-18 DS005705-16 www.national.com DS005705-17 4 LM119A/LM119/LM219 (Continued) Supply Current Supply Current LM119/LM219/LM319 Typical Performance Characteristics Output Limiting Characteristics DS005705-20 DS005705-19 DS005705-21 Typical Performance Characteristics Input Currents LM319A, LM319 Supply Currents Transfer Function DS005705-22 DS005705-23 DS005705-24 Response Time for Various Input Overdrives Response Time for Various Input Overdrives Input Characteristics DS005705-27 DS005705-25 DS005705-26 5 www.national.com LM119/LM219/LM319 Typical Performance Characteristics Response Time for Various Input Overdrives LM319A, LM319 (Continued) Response Time for Various Input Overdrives DS005705-30 DS005705-28 Supply Current Output Saturation Voltage DS005705-29 Common Mode Limits DS005705-31 Output Limiting Characteristics DS005705-32 DS005705-33 www.national.com 6 7 *Do not operate the LM119 with more than 16V between GND and V+ DS005705-1 LM119/LM219/LM319 Schematic Diagram www.national.com LM119/LM219/LM319 Connection Diagrams Metal Can Package DS005705-9 Order Number LM119W/883 See NS Package Number W10A DS005705-7 Case is connected to pin 5 (V-) Top View Order Number LM119H, LM119H/883 (Note 1), or LM319H See NS Package Number H10C www.national.com 8 LM119/LM219/LM319 Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) Order Number LM119H, LM119H/883, LM319AH or LM319H NS Package Number H10C Cavity Dual-In-Line Package (J) Order Number LM119J, LM119J/883, LM219J, LM319AJ or LM319J NS Package Number J14A 9 www.national.com LM119/LM219/LM319 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Dual-In-Line Package (M) Order Number LM319AM or LM319M NS Package Number M14A Molded Dual-In-Line Package (N) Order Number LM319AN or LM319N NS Package Number N14A www.national.com 10 LM119/LM219/LM319 High Speed Dual Comparator Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Order Number LM119W/883, LM119WG/883 NS Package Number W10A, WG10A LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated