R08DS0030EJ0100 Rev.1.00 Page 1 of 13
Aug 14, 2012
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
Data Sheet
PS9123
HIGH CMR, 15 Mbps TOTEM POLE OUTPUT TYPE, 5-PIN SOP (SO-5) PHOTOCOUPLER
DESCRIPTION
The PS9123 is an optically coupled high-speed, totem pole output isolator containing a GaAlAs LED on the input side
and a photodiode and a signal processing circuit on the output side on one chip.
The PS9123 is specified hi gh C M R , hig h CT R and pul se width distort ion wi t h operating temperature.
FEATURES
• High common mode transient immunity (CMH, CML = ±20 kV/
μ
s TYP.)
• Small package (SO-5)
• Pulse width dist ort i o n ( ⏐tPHL − tPLH⏐ = 4 ns TYP.)
• High-spee d (1 5 M bps)
• High isolat i on vol t a ge (BV = 3 750 Vr.m .s.)
• Totem pole output
• Embossed tape product : PS9123-F3 : 2 500 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• DIN EN60747-5-5 (VDE0884-5): 2011-11 approved No. 40008902 (Option)
APPLICATIONS
• PLC
• Inverter
• AC servo
R08DS0030EJ0100
Rev.1.00
Aug 14, 2012
1. Anode
2. Cathode
3. GND
4. V
O
5. V
CC
PIN CONNECTION
(Top View)
53
12
4
TRUTH TABLE
LED Output
ON L
OFF H
<R>
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 2 of 13
Aug 14, 2012
PACKAGE DIMENSIONS (UNIT: mm)
1.27
0.4
+0.10
–0.05
0.25 M
0.1±0.1
2.6±0.2
(4.4)
*1
7.0±0.3
0.5±0.3
0.15
+0.10
–0.05
3.4
+0.3
–0.1
53
12
4
*1 ( ) indicates reference dimension.
PHOTOCOUPLER CONSTRUCTION
Parameter Unit (MIN.)
Air Distance 4.2 mm
Outer Creepage Distance 4.2 mm
Isolation Distance 0.2 mm
MARKING EXAMPLE
No. 1 pin Mark
Initial of Renesas
(Engraved mark)
Rank Code
Year Assembled
(Last 1 Digit)
Week Assembled
N231
9123
N231
R*1
*1 Bar : Pb-Free
Type Number
Assembly Lot
Ni/Pd/Au PLATING
<R>
<R>
<R>
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 3 of 13
Aug 14, 2012
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification Packing Style Safety Standard
Approval Application
Part
Number*1
PS9123 PS9123-AX Pb-Free 20 pcs (Tape 20 pcs cut) Standard products PS9123
PS9123-F3 PS9123-F3-AX (Ni/Pd/Au) Embossed Tape 2 500
pcs/reel (UL, CSA approved)
PS9123-V PS9123-V-AX 20 pcs (Tape 20 pcs cut) DIN EN60747-5-5
PS9123-V-F3 PS9123-V-F3-AX Embossed Tape 2 500
pcs/reel
(VDE0884-5): 2011-11
Approved (Option)
Note: ∗1. For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current ∗1 I
F 20 mA
Reverse Voltage VR 5 V
Detector Supply Voltage VCC 7 V
Output Voltage VO 7 V
High Level Output
Current IOH −5 mA
Low Level Output
Current IOL 13 mA
Power Dissipation ∗2 P
C 130 mW
Isolation Voltage *3 BV 3 750 Vr.m.s.
Operating Ambient Temperature TA −40 to +100 °C
Storage Temperature Tstg −55 to +125 °C
Notes: ∗1. Reduced to 0.19 mA/°C at TA = 60°C or more.
∗2. TA = −40 to +100°C, applies to output pin VO and power supply pin VCC. Reduced to 2.4 mW/°C at TA = 70°C
or more.
∗3. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-5 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter Symbol MIN. TYP. MAX. Unit
High Level Input Current IFH 7.5 12.5 mA
Low Level Input Voltage VFL 0 0.8 V
Supply Voltage VCC 4.5 5.0 5.5 V
TTL (loads) N 3
<R>
<R>
<R>
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 4 of 13
Aug 14, 2012
ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, unless otherwise specified)
Parameter Symbol Conditions MIN. TYP.∗1 MAX. Unit
Diode Forward Voltage VF I
F = 10 mA, TA = 25°C 1.3 1.55 1.8 V
Reverse Current IR V
R = 3 V, TA = 25°C 10
μ
A
Terminal Capacitance Ct f = 1 MHz, VF = 0 V, TA = 25°C 30 pF
Detector High Level Ou tp ut
Current IOH VCC = VO = 5.5 V,
IF = 0 mA 0.05 100
μ
A
High Level Output
Voltage VOH VCC = 4.5 V, IF = 0 mA,
IOH = –2 mA 2.4 3.0 V
Low Level Output
Voltage VOL VCC = 4.5 V, IF = 7 mA,
IOL = 8 mA 0.25 0.6 V
High Level Supply
Current ICCH VCC = 5.5 V, IF = 0 mA,
VO = open 4 7 mA
Low Level Supply
Current ICCL VCC = 5.5 V, IF = 10 mA,
VO = open 6 10 mA
High Level Output Short
Circuit Current IOSH VCC = 5.5 V, VO = GND,
IF = 0 mA, 10 ms or less –43 mA
Low Level Output Short
Circuit Current IOSL VCC = VO = 5.5 V,
IF = 8 mA, 10 ms or less 28 mA
Coupled Threshold Input Voltage
(H → L) IFHL V
CC = 5 V, VO = 0.6 V 2.3 5 mA
Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60%,
TA = 25°C 1011 Ω
Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25°C 0.6 pF
Propagation Delay Time
(H → L)*2 tPHL V
CC = 5 V, IF = 7.5 mA 10 28 60 ns
Propagation Delay Time
(L → H)*2 tPLH V
CC = 5 V, IF = 7.5 mA 10 32 60 ns
Pulse Width Distortion
(PWD)*2 ⏐tPHL–tPLH⏐VCC = 5 V, IF = 7.5 mA 4 30 ns
Common Mode
Transient Immunity at
High Level Output*3
CMH VCC = 5 V, TA = 25°C,
IF = 0 mA, VO (MIN.) = 2 V,
VCM = 1 kV
15 20 kV/
μ
s
Common Mode
Transient Immunity at
Low Level Output*3
CML VCC = 5 V, TA = 25°C,
IF = 7.5 mA, VO (MAX.) = 0.8 V,
VCM = 1 kV
15 20 kV/
μ
s
<R>
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 5 of 13
Aug 14, 2012
Notes: *1. Typical values at TA = 25°C
*2. Test circuit for propagation de lay time
Input
Output
1.5 V
V
OH
V
OL
t
PHL
t
PLH
I
F
(ON)
50% I
F
(ON)
C
L
includes probe and stray wiring capacitance.
Pulse input (I
F
)V
O
(monitor)
Input
(monitor)
(PW = 500 ns,
Duty cycle = 1/2)
47 Ω
V
CC
= 5 V
0.1 F
μ
C
L
=
30 pF 2.5 kΩ
1.3 kΩ
V
CC
= 5 V
1
23
4
5
*3. Test circuit for common mode transient immunity
90%
10%
1 kV
0 V
V
OH
2 V
0.8 V
V
OL
V
CM
V
O
(I
F
= 0 mA)
V
O
(I
F
= 7.5 mA)
t
r
t
f
C
L
includes probe and stray wiring capacitance.
V
O
(Monitor)
V
CC
= 5 V
0.1 F
μ
C
L
= 15 pF
I
F
V
CM
= 1 kV
1
23
4
5
SW
–+
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 6 of 13
Aug 14, 2012
TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified)
20 40 60 80 1200
10
20
30
40
20 40 60 80 100 1200
50
100
150
1.0
0.01
0.1
1
10
100
1.2 1.4 1.6 1.8 2.0 2.2 2.4
T
A
= +100˚C
+85˚C
+50˚C
+25˚C
0˚C
–40˚C
–50 –25 0 25 50 75 100
0
8
4
12
16
20
I
CCL
(I
F
= 10 mA)
V
CC
= 5.5 V
I
CCH
(I
F
= 0 mA)
–50 –25 0 25 50 75 100
0
2.0
1.0
3.0
4.0
5.0 V
CC
= 4.5 V,
V
F
= 0.8 V,
I
OH
= 2.0 mA
0
20
10
30
40
50
–50 –25 0 25 50 75 100
t
PLH
t
PHL
PWD
I
F
= 7.5 mA
V
CC
= 5.0 V
100
MAXIMUM FORWARD CURRENT
vs. AMBIENT TEMPERATURE
Maximum Forward Current I
F
(mA)
Ambient Temperature T
A
(˚C)
FORWARD CURRENT vs.
FORWARD VOLTAGE
Forward Current I
F
(mA)
Forward Voltage V
F
(V)
HIGH LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
High Level Output Voltage V
OH
(V)
Ambient Temperature T
A
(˚C)
DETECTOR POWER DISSIPATION
vs. AMBIENT TEMPERATURE
Detector Power Dissipation P
C
(mW)
Ambient Temperature T
A
(˚C)
SUPPLY CURRENT vs.
AMBIENT TEMPERATURE
High Level Supply Current I
CCH
(mA)
Low Level Supply Current I
CCL
(mA)
Ambient Temperature T
A
(˚C)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. AMBIENT TEMPERATURE
Propagation Delay Time t
PHL
, t
PLH
(ns),
Pulse Width Distortion t
PHL
– t
PLH
(ns)
Ambient Temperature T
A
(˚C)
Remark The graphs indicate nominal characteristics.
<R>
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 7 of 13
Aug 14, 2012
0
0.2
0.1
0.3
0.4
0.5
2.5 7.5
5 10 12.5 13
0
V
CC
= 5.0 V
V
CC
= 4.5 V,
I
F
= 5.0 mA
1
2
3
4
5
–50 –25 0 25 50 75 100 –50 –25 0 25 50 75 100
0
0.2
0.1
0.3
0.4
0.5
V
CC
= 4.5 V,
I
F
= 7.5 mA,
I
OL
= 8.0 mA
–1 –2 –3 –4 –5
0
2
1
3
4
5
V
CC
= 4.5 V,
V
F
= 0.8 V
–30–25–20–15–10–50
2
1
3
4
V
CC
= 4.5 V,
I
F
= 250 A
μ
85˚C
0
40
20
60
510152025
T
A
= 25˚C,
V
CC
= 5 V
t
PHL
t
PLH
PWD
LOW LEVEL OUTPUT VOLTAGE vs.
AMBIENT TEMPERATURE
Low Level Output Voltage V
OL
(V)
Ambient Temperature T
A
(˚C)
LOW LEVEL OUTPUT VOLTAGE vs.
LOW LEVEL OUTPUT CURRENT
Low Level Output Voltage V
OL
(V)
Low Level Output Current I
OL
(mA)
HIGH LEVEL OUTPUT VOLTAGE vs.
HIGH LEVEL OUTPUT CURRENT
High Level Output Voltage V
OH
(V)
THRESHOLD INPUT CURRENT vs.
AMBIENT TEMPERATURE
Threshold Input Current I
FHL
(mA)
Ambient Temperature T
A
(˚C)
HIGH LEVEL OUTPUT VOLTAGE vs.
HIGH LEVEL OUTPUT CURRENT
High Level Output Voltage V
OH
(V)
High Level Output Current I
OH
(mA)
High Level Output Current I
OH
(mA)
PROPAGATION DELAY TIME,
PULSE WIDTH DISTORTION
vs. FORWARD CURRENT
Propagation Delay Time t
PHL
, t
PLH
(ns),
Pulse Width Distortion t
PHL
– t
PLH
(ns)
Forward Current I
F
(mA)
85˚C85˚C
T
A
= 100˚C
85˚C
0˚C
–40˚C
25˚C
T
A
= 100˚C
–40˚C
85˚C
25˚C
0˚C
T
A
= 100˚C
85˚C
0˚C
25˚C
Remark The graphs indicate nominal characteristics.
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 8 of 13
Aug 14, 2012
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
Tape Direction
PS9123-F3
Outline and Dimensions (Reel)
Packing: 2 500 pcs/reel
100±1.0
φ
13.0±0.2
φ
330±2.0
φ
2.0±0.5
11.9 to 15.4
Outer edge of
flange
17.5±1.0
13.5±1.0
2.0±0.5
13.0±0.2
R 1.0 21.0±0.8
1.55±0.1
2.0±0.05
4.0±0.1
1.75±0.1
3.9±0.1
3.45 MAX.
7.4±0.1
0.3±0.05
8.0±0.1
1.5
+0.1
–0
5.5±0.1
12.0±0.2
3.0±0.1
<R>
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 9 of 13
Aug 14, 2012
RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm)
D
B1
B2
A
PS9123
Part Number AB1 CDB2
6.25 1.27 2.54 0.8 1.45
C
<R>
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 10 of 13
Aug 14, 2012
NOTES ON HANDLING
1. Recommended soldering conditions
(1) Infrared re f l ow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three or less
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt% or less is recommended.)
120±30 s
(preheating)
220˚C
180˚C
Package Surface Temperature T (˚C)
Time (s)
Recommended Temperature Profile of Infrared Reflow
(heating)
to 10 s
to 60 s
260˚C MAX.
120˚C
(2) Wave soldering
• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt% or less is recommended.)
(3) Soldering by Soldering Iron
• Peak Temperature (lead part temperature) 350°C or below
• Time (each pin) 3 seconds or less
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum
chlorine content of 0.2 Wt% or less is recommended.)
(a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead
(4) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions Regarding Noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output at startup, the output
transistor may enter the on state, even if the voltage is within the absolu te maximum ratings.
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 11 of 13
Aug 14, 2012
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1
μ
F or more is used between VCC and GND near device. Also, ensure that the distance
between the leads of the photocoupler and capacitor is 10 mm or less.
3. Avoid storage at a high temperature and high humidity.
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 12 of 13
Aug 14, 2012
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter Symbol Spec. Unit
Climatic test class (IEC 60068-1/DIN EN 60068-1) 40/100/21
Dielectric strength
maximum operating isolati on voltage
Test voltage (partial dischar ge test, procedure a for type test and
random test)
Upr = 1.6 × UIORM, Pd < 5 pC
UIORM
Upr
707
1 131
Vpeak
Vpeak
Test voltage (partial dischar ge test, procedure b for all devices)
Upr = 1.875 × UIORM, Pd < 5 pC Upr 1 326 Vpeak
Highest permissible overvoltage UTR 6 000 Vpeak
Degree of pollution (DIN EN 60664-1 VDE0 110 Part 1) 2
Comparative tracking index (IEC 60112/DIN EN 60112 (VDE 0303
Part 11)) CTI 175
Material group (DIN EN 60664-1 VDE0110 Part 1) III a
Storage temperature range Tstg –55 to +125 °C
Operating temperature range TA –40 to +100 °C
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
VIO = 500 V dc at TA MAX. at least 100°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
Safety maximum ratings (maximum permissible in case of fault, see
thermal derating curve)
Package temperature
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
VIO = 500 V dc at TA = Tsi
Tsi
Isi
Psi
Ris MIN.
150
200
300
109
°C
mA
mW
Ω
<R>
PS9123 e
R08DS0030EJ0100 Rev.1.00 Page 13 of 13
Aug 14, 2012
Caution GaAs Products This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
All trademarks and registered trademarks are the property of their respective owners.
C - 1
Revision History PS9123 Data Sheet
Description
Rev. Date Page Summary
0.01 Jan 29, 2011 − First edition issued
Throughout “Preliminary Data Sheet” is changed to “Data Sheet.”
p.1 Modification of FEATURES
p.2 Modificati on of PACKAGE DIMENSIONS
Modification of PHOTOCOUPLER CONSTRUCTION
Modification of MARKING EXAMPLE
p.3 Additi on of ORDERING INF ORMATION
Modification of ABSOLUTE MAXIMUM RATINGS
Modification of RECOMMENDED OPERATING CONDITIONS
pp.4, 5 Modification of ELECTRICAL CHARACTERISTICS
pp.6, 7 Addition of T YPICAL CHARA CTERISTICS
p.8 Addition of TAPING SPECIFICATIONS
p.9 Additi on of RECOMMENDED MOUNT PAD DIMENSIONS
Aug 14, 2012
pp.10, 11 Addition of NOTES ON HANDLING
1.00
p.12 Addition of SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Notice
1. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
2. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
3. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
4. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Renesas Electronics assumes no responsibility for any losses incurred by you or
third parties arising from such alteration, modification, copy or otherwise misappropriation of Renesas Electronics product.
5. Renesas Electronics products are classified according to the following two quality grades: "Standard" and "High Quality". The recommended applications for each Renesas Electronics product depends on
the product's quality grade, as indicated below.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic
equipment; and industrial robots etc.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; and safety equipment etc.
Renesas Electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat to human life or bodily injury (artificial life support devices or systems, surgical
implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). You must check the quality grade of each Renesas Electronics product before using it
in a particular application. You may not use any Renesas Electronics product for any application for which it is not intended. Renesas Electronics shall not be in any way liable for any damages or losses
incurred by you or third parties arising from the use of any Renesas Electronics product for which the product is not intended by Renesas Electronics.
6. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
7. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or systems manufactured by you.
8. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
9. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or
regulations. You should not use Renesas Electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the
development of weapons of mass destruction. When exporting the Renesas Electronics products or technology described in this document, you should comply with the applicable export control laws and
regulations and follow the procedures required by such laws and regulations.
10. It is the responsibility of the buyer or distributor of Renesas Electronics products, who distributes, disposes of, or otherwise places the product with a third party, to notify such third party in advance of the
contents and conditions set forth in this document, Renesas Electronics assumes no responsibility for any losses incurred by you or third parties as a result of unauthorized use of Renesas Electronics
products.
11. This document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
htt
p
://www.renesas.co
m
Refer to "htt
p
://www.renesas.com/" for the latest and detailed information
.
R
e
n
esas
El
ec
tr
o
ni
cs
Am
e
ri
ca
In
c
.
2880 Scott Boulevard Santa Clara
,
CA 95050-2554
,
U.S.A
.
Tel: +1-408-588-6000, Fax: +1-408-588-6130
Renesas Electronics Canada Limited
1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada
Tel: +1-905-898-5441, Fax: +1-905-898-3220
Renesas Electronics Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K
Tel: +44-1628-651-700, Fax: +44-1628-651-804
Renesas Electronics Europe GmbH
Arcadiastrasse 10, 40472 Düsseldorf, Germany
Tel: +49-211-65030, Fax: +49-211-6503-1327
Renesas Electronics (China) Co., Ltd.
7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China
Tel: +86-10-8235-1155, Fax: +86-10-8235-7679
Renesas Electronics (Shanghai) Co., Ltd.
Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China
Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898
Renesas Electronics Hong Kong Limited
Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong
Tel: +852-2886-9318, Fax: +852 2886-9022/9044
Renesas Electronics Taiwan Co., Ltd.
13F, No. 363, Fu Shing North Road, Taipei, Taiwan
Tel: +886-2-8175-9600, Fax: +886 2-8175-9670
Renesas Electronics Singapore Pte. Ltd.
80 Bendemeer Road, Unit #06-02 Hyflux Innovation Centre Singapore 339949
Tel: +65-6213-0200, Fax: +65-6213-0300
Renesas Electronics Mala
y
sia Sdn.Bhd.
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petalin
g
Jaya, Selan
g
or Darul Ehsan, Malaysi
a
Tel: +60-3-7955-9390
,
Fax: +60-3-7955-951
0
Renesas Electronics Korea Co.
,
Ltd
.
11F., Samik Lavied' or Bld
., 720-2 Yeoksam-Don
, Kan
nam-Ku, Seoul 135-080, Korea
Tel: +82-2-558-3737
,
Fax: +82-2-558-514
1
S
ALE
S
O
FFI
C
E
S
©
2012 Renesas Electronics Corporation. All ri
g
hts reserved
.
Colo
p
hon 2.2