HAT2220R-EL-E - Renesas Electronics

To our custo mers,

Old Company Name in Catalogs and Other Documents

On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology

Corporation, and Renesas Electronics Corpor ation took over all the business of both

companies. Therefore, althoug h the old com pany name remains in this docum ent, it is a valid

Renesas Electronics document. W e appreciate your understanding.

Renesas Electronics website: http://www.renesas.com

April 1st, 2010

Renesas Electronics Corporation

Issued by: Renesas Electronics Corporation (http://www.renesas.com)

Send any inquiries to http://www.renesas.com/inquiry.

Notice

1. All information included in this document is current as of the date this document is issued. Such information, however, is

subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please

confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to

additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.

2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights

of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.

No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights

of Renesas Electronics or others.

3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.

4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of

semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,

and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by

you or third parties arising from the use of these circuits, software, or information.

5. When exporting the products or technology described in this document, you should comply with the applicable export control

laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas

Electronics products or the technology described in this document for any purpose relating to military applications or use by

the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and

technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited

under any applicable domestic or foreign laws or regulations.

6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics

does not warrant that such information is error free. Ren esas E lectronics assumes no liability whatsoever for any da mages

incurred by you resulting from errors in or omissions from the information included herein.

7. Renesas Electronics products are classified acco rding to the following three quality grades: “Standard”, “High Quality”, and

“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as

indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular

application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior

written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for

which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way

liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an

application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written

consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise

expressly specified in a Renesas Electronics data sheets or data books, et c.

“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual

equipment; home electro nic app liances; machine tool s; p ersonal electron ic equipment; and indu strial robots .

“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-

crime systems; safety equipment; and medical equipment not specifically designed for life support.

“Specific”: Aircraft; aerospace equ i pment; submersible repeaters; nu clear reactor control systems; medical equipment or

systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare

interven tion (e.g. excision, et c.), and any oth er applications or purposes that pose a direct th reat to human life.

8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,

especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation

characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or

damages arising out of the use of Renesas Electronics products beyond such specified ranges.

9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have

specific chara cterist ics such as the o ccurren ce of failure at a certai n rate an d malfunct ion s under certai n u se cond ition s. Further,

Renesas Electronics pr oducts are not subject to radiation resi stance design. Please be sure to implement safety measures to

guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a

Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire

control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because

the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system

manufactured by you.

10. Please contact a Renesas Electronics sales office for det ai ls as to enviro nmental matters such as the en vi ronmental

compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable

laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS

Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with

applicable laws and regulations.

11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas

Electronics.

12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this

document or Renesas Electronics products, or if you have any other inquiries.

(Note 1) “Renesas Electronics” as us ed in this document means Renesas Electronics Corporation and also includes its majo ri ty-

owned subsidiaries.

(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.

REJ03G1572-0500 Rev.5.00 Jul 20, 200 7

Page 1 of 3

HAT2220R

Silicon N Channel MOS FET

High Speed Power Switching REJ03G1572-0500

Rev.5.00

Jul 20, 2007

Features

• Low on-resistance

• Low drive current

• High densit y mounting

Outline

RENESAS Package code: PRSP0008DD-D

(Package name: SOP-8 <FP-8DAV> )

1, 3 Source

2, 4 Gate

5, 6, 7, 8 Drain

MOS1 MOS2

1234

Absolute Maximum Ratings

(Ta = 25°C)

Item Symbol Ratings Unit

Drain to source voltage VDSS 450 V

Gate to source voltage VGSS ±30 V

Drain current ID Note1 0.7 A

Drain peak current ID(pulse)Note2 2.1 A

Body-drain diode reverse drain current IDR 0.7 A

Avalanche current IAP Note3 0.7 A

Channel dissipation Pch Note4 2 W

Channel dissipation Pch Note5 3 W

Channel temperature Tch 150 °C

Storage temperature Tstg –55 to +150 °C

Notes: 1. PW ≤ 1 s

2. PW ≤ 10 µs, duty cycle ≤ 1%

3. STch = 25 °C, Tch ≤ 150 °C

4. 1 Drive operation : When using the glass epo x y board (FR4 40 x 40 x 1.6 mm), PW ≤ 10 s

5. 2 Drive operation : When using the glass epox y board (FR4 40 x 40 x 1.6 mm), PW ≤ 10 s

HAT2220R

REJ03G1572-0500 Rev.5.00 Jul 20, 200 7

Page 2 of 3

Electrical Characteristics

(Ta = 25°C)

Item Symbol Min Typ Max Unit Test Conditions

Drain to source breakdown voltage V(BR)DSS 450 — — V ID = 10 mA, VGS = 0

Zero gate voltage drain current IDSS — — 1 µA VDS = 450 V, VGS = 0

Gate to source leak current IGSS — — ±0.1 µA VGS = ±30 V, VDS = 0

Gate to source cutoff voltage VGS(off) 3.0 — 4.5 V VDS = 10 V, ID = 1 mA

Forward transfer admittance |yfs| 0.55 0.95 — S ID = 0.4 A, VDS = 10 V Note6

Static drain to source on state

resistance RDS(on) — 5.5 6.5 Ω I

D = 0.4 A, VGS = 10 V Note6

Input capacitance Ciss — 140 — pF

Output capacitance Coss — 17 — pF

Reverse transfer capacitance Crss — 5 — pF

VDS = 25 V

VGS = 0

f = 1 MHz

Turn-on delay time td(on) — 22 — ns

Rise time tr — 12 — ns

Turn-off delay time td(off) — 38 — ns

Fall time tf — 47 — ns

ID = 0.4 A

VGS = 10 V

RL = 562 Ω

Rg = 10 Ω

Total gate charge Qg — 4.9 — nC

Gate to source charge Qgs — 0.6 — nC

Gate to drain charge Qgd — 3.2 — nC

VDD = 360 V

VGS = 10 V

ID = 0.7 A

Body–drain diode forward voltage VDF — 0.84 1.24 V IF = 0.7 A, VGS = 0 Note6

Body–drain diode reverse recovery

time trr — 120 — ns

IF = 0.7 A, VGS = 0

diF/dt = 100 A/ µs

Notes: 6. Pulse test

7. Since this device includes t wo high voltage Power MOS FET chips (VDSS ≥ 450 V), high voltage margin may

occur. (Between No.6 pin and No.7 pin in the outline fig.) Therefore, please be sure to confirm about Electric

discharge bet ween No.6 pin and No.7 pin in the equivalent circuit.

HAT2220R

REJ03G1572-0500 Rev.5.00 Jul 20, 200 7

Page 3 of 3

Package Dimensions

P-SOP8-3.95 × 4.9-1.27 0.085g

MASS[Typ.]

FP-8DAVPRSP0008DD-D

RENESAS CodeJEITA Package Code Previous Code

Detail F

Terminal cross section

1.27

1.08

0.40

0.60

0.25

0.460.400.34

0.10

0.250.200.15

MaxNomMin

Dimension in Millimeters

Symbol

Reference

5.3

4.90

3.95

0.14

6.206.105.80

0.25

1.75

0.75

8°0°

1.27

0.1

(Ni/Pd/Au plating) 2.

1. DIMENSIONS "*1(Nom)" AND "*2"

DO NOT INCLUDE MOLD FLASH.

NOTE)

DIMENSION "*3" DOES NOT

INCLUDE TRIM OFFSET.

Index mark

Detail F

Package Name

SOP-8

Ordering Information

Part No. Quantity Shipping Container

HAT2220R-EL-E 2500 pcs Taping

Notes:

1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes

warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property

rights or any other rights of Renesas or any third party with respect to the information in this document.

2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including,

but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples.

3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass

destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws

and regulations, and procedures required by such laws and regulations.

4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this

document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document,

please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be

disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com )

5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a

result of errors or omissions in the information included in this document.

6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability

of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular

application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products.

7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications

or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality

and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or

undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall

have no liability for damages arising out of the uses set forth above.

8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below:

(1) artificial life support devices or systems

(2) surgical implantations

(3) healthcare intervention (e.g., excision, administration of medication, etc.)

(4) any other purposes that pose a direct threat to human life

Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing

applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all

damages arising out of such applications.

9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range,

movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages

arising out of the use of Renesas products beyond such specified ranges.

10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain

rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage

caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and

malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software

alone is very difficult, please evaluate the safety of the final products or system manufactured by you.

11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as

swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products.

Renesas shall have no liability for damages arising out of such detachment.

12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas.

13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have

any other inquiries.

Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan

http://www.renesas.com

Refer to "http://www.renesas.com/en/network" for the latest and detailed information.

Renesas Technology America, Inc.

450 Holger Way, San Jose, CA 95134-1368, U.S.A

Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501

Renesas Technology Europe Limited

Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.

Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900

Renesas Technology (Shanghai) Co., Ltd.

Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120

Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898

Renesas Technology Hong Kong Ltd.

7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong

Tel: <852> 2265-6688, Fax: <852> 2730-6071

Renesas Technology Taiwan Co., Ltd.

10th Floor, No.99, Fushing North Road, Taipei, Taiwan

Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999

Renesas Technology Singapore Pte. Ltd.

1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632

Tel: <65> 6213-0200, Fax: <65> 6278-8001

Renesas Technology Korea Co., Ltd.

Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea

Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145

Renesas Technology Malaysia Sdn. Bhd

Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia

Tel: <603> 7955-9390, Fax: <603> 7955-9510

RENESAS SALES OFFICES

Colophon .7.0