9115 Series 15 to 30 Amp Precision Thermal Circuit Breaker FEATURES * * * * * * 30VDC, 15 to 30 Amps Sealed assemblies, available in manual and automatic reset options Ignition protected SAE J1171 & CCC certified 9115-5 meets CID A-A-55571/01 specifications 9115-6 meets CID A-A-55571/02 specifications UL Recognized E36869 DESCRIPTION The KLIXON(R) 9115 series of circuit breakers was designed for waterproof electrical systems of ordnance vehicles. The 9115 series is recommended for other mobile military and ground equipment, including trucks, tractors, graders, earth movers, fuel units, and amphibious as well as commercial vehicles. In addition to a complete sealed thermal element this series of thermal breakers has molded in terminals and are supplied with rubber connectors (shells). PERFORMANCE CHARACTERISTICS Calibration : 200% rated current, 77F (25C) Ultimate Trip At 77F (25C) Endurance Interrupt Current Capacity Vibration Must hold 100%, Must trip 138% Per SAE J553: Automatic: 2,000 cycles @ 200% rated current Manual: 500 cycles @ 200% rated current Per SAE J553, 600A 10G MIL-STD-202 Method 204, Condition A Mechanical Shock 100G MIL-STD-202 Method 213, Condition C Dielectric Strength MIL-STD-202 Method 301, 1500VAC min Insulation Resistance MIL-STD-202 Method 302, Condition B, 100 M min Weight 25 8 to 50 seconds 9115 Series 9115-5 : 65 grams max 9115-6 : 76 grams max ORDERING INFORMATION X-X Configuration 9115-5 = Auto, sealed 9115-6 = Manual, sealed Amp Rating (15, 20, 25, 30) Current in % Rated Load TRIP CURVE - Approximate Time, Current Characteristics At 77F (25C) 1000 500 100 .10 1 10 100 1000 10,000 Trip Time in Seconds DIMENSIONS - 9115-5 DIMENSIONS - 9115-6 INCHES [MM] INCHES [MM] 2X .174 .002 2X [4.42 .051] MTG. HOLE .562 [14.27] MIN. PANEL HOLE .440 [ 11.18] .500 [12.7] 1.875 [47.63] MAX. .960 [24.4] 1.875 [47.63] MAX. 2X ( .470 [11.94]) 2X( .700 [17.78]) .960 [24.4] SHELL, FEMALE MS33800 .843 .032 [21.41 .813] .625 .032 [15.88 .813] 2X ( .470 [11.94]) 2X( .700 [17.78]) SHELL, FEMALE MS33800 .843 .032 [21.41 .813] 2X R .485 [12.32] 2.000.032 [50.8.813] DOES NOT INCLUDE SEALING GASKET .625 .032 [15.88 .813] 1.574 .008 1.187 .032 2X R .485 [12.32] 2.000.032 [50.8.813] DOES NOT INCLUDE SEALING GASKET 1.574 .008 1.187 .032 2X #8-32 MOUNTING NUTS Notes: 1. Shell female MS33800 mates with MS27143 or MS27144. 2X #8-32 MOUNTING NUTS www.sensata.com 26 BUSINESS CENTER http://www.sensata.com/ Sensata Technologies Inc. 529 Pleasant Street Attleboro, MA 02703, USA Phone: +1 508-236-3800 Fax: +1 508-236-2349 (c)2013 Sensata Technologies, Inc. All rights reserved worldwide. Printed in USA, revised April 2013. Important Notice: Sensata Technologies reserves the right to make changes to, or to discontinue, any product or service identified in this publication without notice. Before placing orders, users should obtain the latest version of the relevant information to verify that the information being relied upon is current. Sensata Technologies assumes no responsibility for customers' product designs or applications. Users must determine the suitability of the Sensata device described in this publication for their application, including the level of reliability required. Many factors beyond Sensata's control can affect the use and performance of a Sensata product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. As these factors are uniquely within the user's knowledge and control, it is essential that the user evaluate the Sensata product to determine whether it is fit for a particular purpose and suitable for the user's application. Sensata Technologies products are sold subject to Sensata's Terms and Conditions of Sale which can be found at: www.sensata.com/terms.htm