20
16
09 99 000 0175
09 99 000 0169
09 99 000 0246
09 99 000 0253
09 99 000 0252
09 99 000 0249
09 99 000 0250
09 99 000 0251
09 99 000 0628
09 99 000 0158
09 99 000 0535
09 99 000 0597
09 99 000 0171
09 99 000 0513
Tooling
Tool
Identification Part No.
Tools for crimp termination – D-Sub-S, D-Sub-HD, DIN 41 612
Service crimp tool
for single D-Sub
standard contacts
for single D-Sub
high density contacts
forstandardcontacts
Assembly of crimp contacts
After crimping the stranded wire to the contact using a hand tool or
automatic crimping device, insert the contact into the chamber with
the tool, working from the wiring side. You will hear the contacts snap
home and to check that they are securely in place, give the wire a
gentle pull.
Removing crimp contacts
Position the tool from the wiring side as shown in the
diagram below and insert into the contact chamber. The
contact can then easily be removed from the wiring side
together with the wire itself and reinserted in a different
chamber. The tool is designed for a maximum insulation
diameter of Ø 1.7 mm.
Stripping length: 2.5 + 0.5 mm
for 500 bandoliered
D-Sub standard contacts
for 500 bandoliered D-Sub
high density contacts
HARTING-
Crimp tool
HARTING-
Semi-automatic
crimping device
Main drive
foot-operated
220 V / 50 Hz
Crimping head for
bandoliered D-Sub
standard contacts
for DIN 41 612
contacts, types
BC / har-bus® 64
FC 1
FC 2
FC 3
BC / har-bus® 64
Reel holder for
10 000 contacts
Insertion and
removal tool
for single D-Sub
standard contacts
for single D-Sub
high density contacts
Wire gauge
0.09-0.56 mm² (AWG 28-20)
0.09 - 0.5 mm²
0.09 - 0.25 mm²
0.14 - 0.56 mm²
0.5 - 1.5 mm²
0.13 mm² (solid wire)
Tools for crimp contacts
forhighdensitycontacts
