MINI-SAS HIGH DENSITY Connectors & Cable Assemblies TE Connectivity's (TE's) Mini-SAS HD (high density) product family includes compact, high-speed I/O solutions for SAS applications: storage, rack-mount servers, workstations, storage racks, high performance computing, HBAs (host bus adapters), RAID (redundant arrays of inexpensive disks), switches and more. The product family supports speeds up to 12 Gb/s and includes the following interfaces: * Internal receptacles and copper cable assemblies * External receptacles and copper cable assemblies The interfaces are adopted for the SAS-2.1 and SAS-3 standards. The reduced size of the interconnects saves additional 30% to 50% PCB space; a low profile PCIe card can accomodate 4 Mini-SAS HD connectors versus 2 SAS connectors. DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES Internal Applications Internal Mini-SAS HD Connector TE's internal Mini-SAS HD connector is a 12 Gb/s highdensity, high-speed interface capable of supporting an aggregate data rate of 48 Gb/s per connector (12G x 4 lanes) with a version capable of transferring an aggregate data rate of 192 Gb/s. Designed to be approximately 30 % smaller than conventional internal Mini-SAS connectors, the internal Mini-SAS HD connector enables you to save precious PCB space. Additionally, the connector has been Features adopted by SAS 2.1 and SAS 3 specifications. * High Density, High-Speed: Aggregate data transfer of 48 Gb/s; capable of transferring 192 Gb/s Featuring both right angle and vertical orientations, in the 1x4 version TE's internal Mini-SAS HD interconnects suit a variety of architectures in multiple applications: enterprise storage, * Compact Size: 0.75mm contact high-performance computing, networking and data centers. pitch that's 30% smaller than The connector supports direct passive and active copper existing products cable assemblies. * Electrical * * Current rating: Signal application only Press-fit termination * Pre-assembled, one-piece * and SAS-3 at 12 Gb/s requirements Voltage rating: 30 volts AC * connector Signal integrity performance meets SAS-2.1 at 6 Gb/s * Faster Installation: orientation * Flexibility: * Plug insertion force: 50N Max * Plug extraction force: 25N Max * Latch retention: 50N Min * Durability: 250 cycles Materials * Receptacle housing: LCP * Contacts: Copper Alloy * Chicklets: LCP 1x1, 1x2 and 1x4 configurations available Mechanical * Keying for proper plug * Plug options for direct passive and active copper cable assemblies * Stacked board interface with 36 positions per 1x1 * Error-Proof: Screw mounted for additional retention * 100 Ohm impedance Protocols /Specifications * SAS-2.1 at 6 Gb/s * SAS 3.0 at 12 Gb/s * SFF-8643 Technical Documents DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES * Product Specification: 108-32038 * Application Specification: 114-32101 PAGE 2 INTERNAL APPLICATIONS Internal Applications Internal Mini SAS HD Connector Part Numbers Part Number 2227580-1 2227581-1 2227582-1 2227595-1 2227640-1 2227642-1 Orientation Right Angled Press-fit Right Angled Press-fit Right Angled Press-fit Vertical Press-fit Vertical Press-fit Vertical Press-fit Configuration Impedance 1x1 100 Ohms 1x2 100 Ohms 1x4 100 Ohms 1x1 100 Ohms 1x2 100 Ohms 1x4 100 Ohms DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES PAGE 3 Internal Applications Internal Mini-SAS HD Cable Assembly TE's internal Mini-SAS HD cable assembly offers system designers with a high speed connection packaged in an extremely flexible, small design. Performing at 12 Gb/s per lane at four lanes, the product transfers data at a total rate of 48 Gb/s. Paired with our internal Mini-SAS HD receptacle, the connector can drive higher aggregate data rates of 192G. Designed with ultra-slim Madison Cable brand TurboTwin Features cable and a short 18mm connector (plug), the cable assembly * High Speed: Transfers data at 12 improves airflow while saving additional PCB space. These Gb/s; total aggregate data trans- advtanges are critical for internal, inside-the-box applications fer per connector is 48 Gb/s that demand efficient space usage. * Greater Airflow + Space Savings The cable assembly is available in multiple lengths ranging * Short 18mm length connector from .3m to 1m and is designed for reliability through use * Madison 4 pair 30AWG 12G of an abrasion- and cut-resisteant cable jacket. This jacket TurboTwin composite flat additionally shields isolation to maintain signal integrity. twin axial cable (with side bands) Electrical * Compiiant to SAS 3.0 at 12 Gb/s ; SAS 2.1 at 6 Gb/s * Attenuation: 100 Ohm 3.7 dB/m at 6 GHz ; 85 Ohm 4.3 * dB/m at 6 GHz * Latch retention: 40N min * Right angle pull: 15N min * UL VW-1 Rated * REACH and RoHS II compliant Straight and right angle cable Available in either PVC or halogen-free cable jacket material * 85 or 100 Ohm impedance Robust Design: Cable jacketed for abrasion/cut resistance and Materials PVC or Halogen-free (class 3) PCBA cable jacket options Lengths from 0.3m through * * * * connector configurations 2 cables with 4 pairs in each cable Durability: 250 mating cycles 4x and 8x configurations * Compliant to SFF-8643 Cable construction consists of 8 differential pair bundles: * * 1m Mechanical * * Design Flexibility shield isolation (no metallic edges) * Webbed flat cable for separation in termination zone Technical Documents Protocols / Specifications * * SAS-2.1 at 6 Gb/s * SAS 3.0 at 12 Gb/s * Compliant to SFF-8643 * Compatible with PCIe Gen 3 Product Specification: 108-32038 DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES PAGE 4 Internal Applications Internal Mini-SAS HD Cable Assembly Part Numbers Part Number Cable Assembly Type Assembly Length (MR) Impedance Halogen Free 2231171-1 4i, Straight to Straight plugs 0.3 100 No 2231171-2 4i, Straight to Straight plugs 0.5 100 No 2231171-3 4i, Straight to Straight plugs 0.7 100 No 2231171-4 4i, Straight to Straight plugs 1.0 100 No 2820350-1 4i, Straight to Straight plugs 0.3 100 Yes 2820350-2 4i, Straight to Straight plugs 0.5 100 Yes 2820350-3 4i, Straight to Straight plugs 0.7 100 Yes 2820350-4 4i, Straight to Straight plugs 1.0 100 Yes 2820328-1 4i, Right Angle to Right Angle plugs 0.3 100 No 2820328-2 4i, Right Angle to Right Angle plugs 0.5 100 No 2820328-3 4i, Right Angle to Right Angle plugs 0.7 100 No 2820328-4 4i, Right Angle to Right Angle plugs 1.0 100 No 2820329-1 4i, Right Angle to Right Angle plugs 0.3 100 Yes 2820329-2 4i, Right Angle to Right Angle plugs 0.5 100 Yes 2820329-3 4i, Right Angle to Right Angle plugs 0.7 100 Yes 2820329-4 4i, Right Angle to Right Angle plugs 1.0 100 Yes 2820332-1 4i, Straight to Right Angle plugs 0.3 100 No 2820332-2 4i, Straight to Right Angle plugs 0.5 100 No 2820332-3 4i, Straight to Right Angle plugs 0.7 100 No 2820332-4 4i, Straight to Right Angle plugs 1.0 100 No 2820333-1 4i, Straight to Right Angle plugs 0.3 100 Yes 2820333-2 4i, Straight to Right Angle plugs 0.5 100 Yes 2820333-3 4i, Straight to Right Angle plugs 0.7 100 Yes 2820333-4 4i, Straight to Right Angle plugs 1.0 100 Yes 2820337-1 8i, Straight to Straight plugs 0.3 100 No 2820337-2 8i, Straight to Straight plugs 0.5 100 No 2820338-1 8i, Straight to Straight plugs 0.3 100 Yes 2820338-2 8i, Straight to Straight plugs 0.5 100 Yes DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES PAGE 5 Internal Applications Internal Mini-SAS HD Cable Assembly Part Numbers Part Number Cable Assembly Type Assembly Length (MR) Impedance Halogen Free 2820325-1 4i, Right Angle to Right Angle plugs 0.3 85 No 2820325-2 4i, Right Angle to Right Angle plugs 0.5 85 No 2820325-3 4i, Right Angle to Right Angle plugs 0.7 85 No 2820325-4 4i, Right Angle to Right Angle plugs 1.0 85 No 2820326-1 4i, Right Angle to Right Angle plugs 0.3 85 Yes 2820326-2 4i, Right Angle to Right Angle plugs 0.5 85 Yes 2820326-3 4i, Right Angle to Right Angle plugs 0.7 85 Yes 2820326-4 4i, Right Angle to Right Angle plugs 1.0 85 Yes 2820330-1 4i, Straight to Right Angle plugs 0.3 85 No 2820330-2 4i, Straight to Right Angle plugs 0.5 85 No 2820330-3 4i, Straight to Right Angle plugs 0.7 85 No 2820330-4 4i, Straight to Right Angle plugs 1.0 85 No 2820331-1 4i, Straight to Right Angle plugs 0.3 85 Yes 2820331-2 4i, Straight to Right Angle plugs 0.5 85 Yes 2820331-3 4i, Straight to Right Angle plugs 0.7 85 Yes 2820331-4 4i, Straight to Right Angle plugs 1.0 85 Yes 2820334-1 4i, Straight to Straight plugs 0.3 85 No 2820334-2 4i, Straight to Straight plugs 0.5 85 No 2820334-3 4i, Straight to Straight plugs 0.7 85 No 2820334-4 4i, Straight to Straight plugs 1.0 85 No 2820335-1 4i, Straight to Straight plugs 0.3 85 Yes 2820335-2 4i, Straight to Straight plugs 0.5 85 Yes 2820335-3 4i, Straight to Straight plugs 0.7 85 Yes 2820335-4 4i, Straight to Straight plugs 1.0 85 Yes 2820339-1 8i, Straight to Straight plugs 0.3 85 No 2820339-2 8i, Straight to Straight plugs 0.5 85 No 2820340-1 8i, Straight to Straight plugs 0.3 85 Yes 2820340-2 8i, Straight to Straight plugs 0.5 85 Yes DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES PAGE 6 External Applications External Mini-SAS HD Connector TE's Mini-SAS HD external receptacle connector is a highdensity, high-speed IO interface adopted for the SAS 2.1 standard and proposed for SAS 3.0 standard. The product is designed to support 6 Gb/s and 12 Gb/s SAS applications. The assembly is offered in 4x, 8x, and 16x versions. Electrical * Connector signal integrity performance meets requirements of current SAS-2.1 at 6 Gb/s, and capable of Features * for 6 and 12 Gbps compliance with SAS-3 at 12 Gb/s * * Voltage rating: 120 volts AC * Current rating: Signal application only High Speed: Broadband design Board receptacle provides 1x1 (4x), 1x2 (8x) and 1x4 (16x) configurations Mechanical * * Plug insertion force: 100N Max * Plug extraction force: 50N Max * Latch retention: 133.5N Min * Durability: 250 cycles Materials Easy Installation: Preassembled, one-piece interconnect offers one-step placement onto PCB * Lightpipe options available * REACH and RoHS compliant * Improved cable latch design * Enhanced EMI skirt design * Scalable: 4x and 8x cable plug * Receptacle housing: LCP * Shield assembly: Nickel Silver * Contacts: Copper Alloy * EMI Spring: Copper Alloy * Threaded nut: Brass Protocols / Specifications * Chicklets: LCP * SAS-2.1 at 6 Gb/s * SAS-3 at 12 Gb/s * SFF-8644 options * 26, 28, and 30 AWG bulk cable Technical Documents * Product Specification: 108-2462 * Application Specification: 114-3316 External Mini SAS HD Connector Part Numbers P/N Description 2149027-1 1x1 Receptacle Assembly 2149966-1 1x2 Receptacle Assembly 2149375-1 1x4 Receptacle Assembly 2198484-1 1X1 Receptacle Assembly with lightpipe 2198483-1 1x2 Receptacle Assembly with lightpipe 2180736-1 1x4 Receptacle Assembly with lightpipe DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES PAGE 7 External Applications External Mini-SAS HD Copper Cable Assembly The passive direct attach external Mini-SAS HD copper cable assembly is designed for broadband operation optimized for 6 and 12 Gb/s. The EEPROM signature enables the host to identify what type and length of cable is connected to its port, and can be customized for any application. An improved latch design reduces the insertion force and increases the retention force. MADISON CABLE brand TurboTwin bulk cable, and the dual 4 pair cable exit backshell provide flexibility for routing. Features * Electrical * Fully compliant to SAS 2.1 at 6 Gb/s , SAS 3.0 at 12 Gb/s and SFF-8644 * Impedance: 100 Ohm * Shielded for EMI High-Speed: Broadband design for 6 and 12 Gb/s * Improved Cable Management / Airflow: Dual 4-pair cable design for flexibility and routability * Design Flexibility: Mechanical * Built with 12G Madison Brand * Cable backshell compliant to SFF-8644 mini-multilane TurboTwin cable and available * interface specification Cable construction consists of 8 differential pairs bundles 2 AWG and 24 AWG in sizes 30 AWG, 28 AWG 26 * cables with 4 pairs in each cable * Durability: 250 mating cycles * Latch retention: 44.5N min * Rotational cable pull: 16.7N min Cable lengths offered range from 0.5m to 8m * Offered in 4x and 8x configurations with EEPROM memory map compliance * Materials * Halogen free class 3 PCBA's used in all assemblies * UL Type CL2 flammability rating * REACH and RoHS II compliant Enhanced latch design for increased retention force and reduced insertion force Protocols / Specifications Part Numbers Minimum Maximum AWG Length Length * SAS-2.1 at 6 Gb/s * SAS-3 at 12 Gb/s * SFF-8644 P/N Description Data Rate 2202501-1 thru -8 4x Passive 6/12 G 26 0.5m 7m 2202502-1 thru -6 4x Passive 6/12 G 28 0.5m 5m Technical Documents 2202503-1 thru -4 4x Passive 6/12 G 30 0.5m 3m * 2820306-1 thru -3 4x Passive 6/12 G 24 6m 8m 2202504-1 thru -8 8x Passive 6/12 G 26 0.5m 7m 2202505-1 thru -6 8x Passive 6/12 G 28 0.5m 5m 2202506-1 thru -4 8x Passive 6/12 G 30 0.5m 3m 2821025-1 thru -3 8x Passive 6/12 G 24 6m 8m 2202507-1 thru -8 4x Passive 6G 26 0.5m 7m 2202508-1 thru -6 4x Passive 6G 28 0.5m 5m 2202509-1 thru -4 4x Passive 6G 30 0.5m 3m DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES Product Specification: 108-2462 PAGE 8 Mini-SAS High Density Connectors & Cable Assemblies TE Technical Support Center USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 te.com/products/minisashd Madison Cable, TurboTwin, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity`s obligations shall only be as set forth in TE Connectivity`s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. (c) 2016 TE Connectivity Ltd. family of companies 7-1773461-9 10/16 All Rights Reserved. DND DATA AND DEVICES /// MINI-SAS HD CONNECTORS & CABLE ASSEMBLIES