Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/12/180G 3.2SN OR BX Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Product image Similar to illustration Pin headers in glass-fibre-reinforced plastic with straight wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the respective counter piece or the circuit board. There is no need for an extra screw to connect the circuit board when the solder flange (LF) version is used. This also protects the solder points from mechanical strain. All pin headers can be manually coded or ordered pre-coded. HC = High Current. General ordering data Type Order No. Version GTIN (EAN) Qty. Product data Packaging SL 5.08HC/12/180G 3.2SN OR BX 1146950000 PCB plug-in connector, male header, closed side, THT solder connection, 5.08 mm, No. of poles: 12, 180, Solder pin length (l): 3.2 mm, tinned, Orange, Box 4032248108589 50 pc(s). IEC: 400 V / 24 A UL: 300 V / 18.5 A Box Creation date January 17, 2019 11:07:05 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 1 Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/12/180G 3.2SN OR BX Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width Height Height of lowest version Depth (inches) 64.16 mm 15.2 mm 12 mm 0.335 inch Width (inches) Height (inches) Depth Net weight Type of connection Pitch in mm (P) Outgoing elbow Number of solder pins per pole Solder pin length tolerance Solder pin dimensions Solder eyelet hole diameter (D) L1 in mm Number of rows Can be coded Plugging force/pole, max. Colour Insulating material group Insulation resistance 2.526 inch 0.598 inch 8.5 mm 4.84 g System specifications Product family OMNIMATE Signal - series BL/SL 5.08 Mounting onto the PCB THT solder connection Pitch in inches (P) 0.2 inch No. of poles 12 Solder pin length (l) 3.2 mm Tolerance of solder pin position 0.15 mm Solder pin dimensions = d tolerance 0 / -0,03 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm L1 in inches 2.2 inch Pin series quantity 1 Plugging cycles 25 Pulling force/pole, max. 7.5 N Board connection 5.08 mm 180 1 +0.1 / -0.3 mm d = 1.2 mm, Octagonal 1.3 mm 55.88 mm 1 Yes 10 N Material data Insulating material Colour chart (similar) CTI UL 94 flammability rating Contact surface Layer structure of plug contact Storage temperature, max. Operating temperature, min. Temperature range, installation, min. PA GF RAL 2000 550 V-0 tinned 1-3 m Ni / 2-4 m Sn matt 55 C -50 C -25 C Contact material Layer structure of solder connection Storage temperature, min. Max. relative humidity during storage Operating temperature, max. Temperature range, installation, max. Rated current, min. no. of poles (Tu=20C) Rated current, min. no. of poles (Tu=40C) Rated voltage for surge voltage class / pollution degree II/2 Rated voltage for surge voltage class / pollution degree III/3 Rated impulse voltage for surge voltage class/ pollution degree III/2 Rated voltage (Use group D / CSA) Rated current (Use group D / CSA) Orange II 108 CuMg 1-3 m Ni / 2-4 m Sn matt -25 C 80 % 100 C 100 C Rated data acc. to IEC tested acc. to standard Rated current, max. no. of poles (Tu=20C) Rated current, max. no. of poles (Tu=40C) Rated voltage for surge voltage class / pollution degree III/2 Rated impulse voltage for surge voltage class/ pollution degree II/2 Rated impulse voltage for surge voltage class/ contamination degree III/3 IEC 60664-1, IEC 61984 19 A 16.5 A 320 V 4 kV 4 kV 24 A 21 A 400 V 250 V 4 kV Rated data acc. to CSA Rated voltage (Use group B / CSA) Rated current (Use group B / CSA) 300 V 18.5 A 300 V 18.5 A Creation date January 17, 2019 11:07:05 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 2 Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/12/180G 3.2SN OR BX Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Rated data acc. to UL 1059 Institute (cURus) Rated voltage (Use group B / UL 1059) 300 V Rated current (Use group B / UL 1059) 18.5 A Reference to approval values Specifications are maximum values, details see approval certificate. Certificate No. (cURus) E60693 Rated voltage (Use group D / UL 1059) 300 V Rated current (Use group D / UL 1059) 10 A Packaging Packaging VPE width Box 116 mm VPE length VPE height 35 mm 168 mm EC002637 EC002637 27-44-04-02 27-44-04-02 ETIM 5.0 eClass 6.2 eClass 8.1 eClass 9.1 EC002637 27-26-07-04 27-44-04-02 27-44-04-02 Classifications ETIM 4.0 ETIM 6.0 eClass 7.1 eClass 9.0 Notes Notes * Additional colours on request * Gold-plated contact surfaces on request * Rated current related to rated cross-section & min. No. of poles. * P on drawing = pitch IPC conformity * Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards. Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Approvals Approvals ROHS Conform Creation date January 17, 2019 11:07:05 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 3 Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/12/180G 3.2SN OR BX Technical data Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Downloads Approval/Certificate/Document of Conformity Brochure/Catalogue CB Certificate CB Testreport Declaration of the Manufacturer FL DRIVES EN MB DEVICE MANUF. EN FL DRIVES DE CAT 2 PORTFOLIOGUIDE EN FL BUILDING SAFETY EN FL APPL LED LIGHTING EN FL INDUSTR.CONTROLS EN FL MACHINE SAFETY EN FL HEATING ELECTR EN FL APPL_INVERTER EN FL_BASE_STATION_EN FL ELEVATOR EN FL POWER SUPPLY EN FL 72H SAMPLE SER EN PO OMNIMATE EN Creation date January 17, 2019 11:07:05 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 4 Data sheet OMNIMATE Signal - series BL/SL 5.08 SL 5.08HC/12/180G 3.2SN OR BX Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Drawings Dimensional drawing Graph Graph Graph Creation date January 17, 2019 11:07:05 PM CET Catalogue status 04.01.2019 / We reserve the right to make technical changes. 5 Wave Solder Profile Recommended wave solderding profiles Weidmuller Interface GmbH & Co. KG Klingenbergstrae 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Single Wave: 260 Contact time appr. 3 sec. 260 C 255 C 250 C 240 220 200 Temperature [C] 180 160 140 appr. 150 C Preheating 120 100 Cooling rate < 6 K/s 80 60 Typical process Prozess limits Temperature on board 40 Heating rate < 3 K/s 20 0 0 20 40 60 80 100 120 time [s] 140 160 180 200 220 240 Double Wave: 255 C Total contact time max. 10 sec. 260 240 260 C 250 C 220 200 Temperature [C] 180 160 140 appr. 150C Preheating 120 100 Cooling rate < 6 K/s 80 60 Typical process Process limits Temperature on board 40 Heating rate < 3 K/s 20 0 0 20 40 60 Wave soldering profiles 80 100 120 time [s] 140 160 180 200 220 240 Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmuller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260C. In practice, the maximum soldering temperature is quite often well below the above maximum profile. We reserve the right to make technical changes.