POWER
DCH5 Series
5 Watts
Total Power: 5 Watts
Input Voltage: 100 - 240 Vac
# of Outputs: Single
SPECIAL FEATURES
USB Switching wallmount power
supply
Universal AC input
Available in various country AC plugs
CE Mark EMC & LVD & ErP 2011
Regulated output
Overload and short circuit protection
Constant voltage, constant current
Energy Star Efciency Level V
Eup compliant
Built in EMI lter (CISPR 22 Class B)
Cable less with - USB-A receptacle
SAFETY
UL + cUL 60950-1
TUV 60950-1
NEMKO 60950-1
NSW 60950-1
C-Tick 60950-1
CE EMC & LVD & ErP 2011 for
EU & UK versions
Electrical Specications
Input
Input range: 100 - 240 Vac (wide range)
Frequency: 47 - 63 Hz
EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B &
EMC
Safety ground
leakage current:
20 μA @ 60 Hz, 264 Vac input
Output
Voltage (Vo): 5 V (4.75 - 5.25 V)
Maximum Power (Po): 5 W
Hold-up time: 10 ms. typical at full load @ 115 Vac/60 Hz
Overvoltage protection: 7 V max. Latching type
Overload protection: Output short circuit protection auto recover
Overload protected 110 - 150% above maximum rating
Output: USB Type A receptacle
Connector Pinout: Pin 1: +V, Pin 2 and Pin 3 connected together
Pin 4: Ground
Data Sheet
Environmental Specications
Operating temperature: 0° to 40 °C ambient
Storage temperature: -20 °C to +70 °C
Electromagnetic susceptibility: Designed to meet EN55082-1
Humidity: Operating; non-condensing 20% to 90% RH
Vibration: Per IEC 60068-2-6
DCH5-050US
DCH5-050EU
DCH5-050UK
DCH5-050AU
DCH5 Series Data Sheet
Ordering Information
Model Number Maximum
Power
Output
Voltage
Minimum
Load Maximum Load Ripple
P/P (PARD)1Connector
DCH5-050US 5 W 5 V 0 1 A 200 mV USB-A
DCH5-050EU 5 W 5 V 0 1 A 200 mV USB-A
DCH5-050UK 5 W 5 V 0 1 A 200 mV USB-A
DCH5-050AU 5 W 5 V 0 1 A 200 mV USB-A
1. Peak-to-peak with 20 mHz bandwidth and 10 μF (tantalum capacitor) in parallel with a 0.1 μF capacitor at rated line voltage and load ranges.
2. Output should not be grounded for EMI purpose.
Mechanical Drawing
1.88”
(47.87)
1.0”
(25.53)
1.4”
(35.55)
DCH5-050US
DCH5-050EU
0.72”
(18.3)
1.88”
(47.87)
1.4”
(35.55)
1.0”
(25.53)
DCH5 Series Data Sheet
Mechanical Drawing
DCH5-050UK
1.88”
(47.87)
0.3”
(7.75)
1.0”
(25.53)
1.4”
(35.55)
1.95”
(49.53)
1.74”
(44.2)
DCH5-050AU
1.88”
(47.87)
0.35”
(9)
1.4”
(35.55)
1.0”
(25.53)
1.63”
(41.3)
DCH5 Series Data Sheet
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com/power
For support: productsupport.ep@artesyn.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other
names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners.
© 2014 Artesyn Embedded Technologies, Inc.
www.artesyn.com
DCH5 Series-DS 06.06.14
Pin Assignments
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ± .02”.
3. Warranty: 2 years
4. Weight: 0.144 lb./0.066kg.
PIN 1 (Vout) PIN 4 (GROUND)
1 2 3 4
Pin Numbers
Connected Together
