CUSTOMER DRAWING Part Name B-151-05 B-151-07 B-151-11 B-151-13 B-151-17 Component Dimensions A B L min min max 4.3 4.8 29.3 (.169) (.189) (1.154) 6.4 7.3 32.5 (.250) (.290) (1.280) 10.0 11.5 35.5 (.395) (.450) (1.395) 13.0 15.1 45.5 (.510) (.595) (1.790) 16.5 19.0 55.0 (.650) (.750) (2.165) D max 4.8 (.189) 7.3 (.290) 11.5 (.450) 15.1 (.595) 18.0 (.710) E min 2.0 (.079) 3.3 (.130) 4.5 (.175) 7.0 (.275) 9.0 (.355) Cable Dimensions F G min max 1.5 4.3 (.059) (.169) 2.8 6.4 (.110) (.250) 4.0 10.0 (.155) (.395) 6.5 13.0 (.255) (.510) 8.0 16.0 (.315) (.630) J0.5 (J.020) 9.0 (.354) 11.0 (.435) 13.0 (.510) 17.0 (.670) 23.0 (.905) MATERIAL 1. INSULATION SLEEVE: Radiation cross-linked modified polyolefin. Transparent clear. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI J-STD-006. FLUX: TYPE ROM1 per ANSI J-STD-004. 3. & 4. MELTABLE SEALING RINGS: Thermally stabilized thermoplastic. 5. GROUND LEAD: RAYCHEM 100G0111-1.00-9, stranded tin plated copper. Color: white. APPLICATION 1. These controlled soldering devices are designed for termination of a bare or tin plated copper shield on a cable having an insulation rated for at least 85C. 2. Temperature range: -55C to +125C. 3. For installation procedure and application equipment consult RPIP-688-01. For best results, prepare the cable as shown: TE Connectivity 300 Constitution Dr Menlo Park, CA 94025, U.S.A. Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A REVISED BY: ANGLES: N/A ROUGHNESS IN MICRON CAGE CODE: Raychem Devices TE Connectivity reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. ECO NUMBER: TITLE: SOLDERSLEEVE LOW-FIRE-HAZARD WITH PRE-INSTALLED LEAD. DOCUMENT NO.: B-151-XX REV: DATE: E1 SCALE: HMR 06090 ECO-11-005139 (c) 1998,2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. If this document is printed it becomes uncontrolled. Check for the latest revision. 15-Apr-11 SIZE: NTS A SHEET: 1 of 1 Print Date:4/15/2011