Compact Diagonal
Series K3G200-AD Ø 200 mm
Highlights:
– Control Input: 0-10 VDC/PWM
– Output: 10 VDC, max 1.1 mA
– Tach Output
– Over-temperature protected electronics/motor
– Soft start, motor current limit
– Locked rotor protection
Material: Impeller: PA plastic
Housing: PP plastic
Mounting position: Any
Condensate discharge holes: None, open rotor
Direction of rotation: Clockwise, seen on rotor
1
2
3
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
0100200300400500600
q cfm
pfs
q cfm
pfs
q cfm
pfs
q cfm
pfs
in. wg
5
6
7
4
8
Air performance measured as per:
ISO 5801, Installation category
A, without protection against
accidental contact.
Suction-side noise levels: LWA as
per ISO 13347, LPA measured at
1m distance to fan axis.
The values given are valid
under the measuring conditions
mentioned and may vary accoring
to the actual installation situation.
With any deviation to the standard
set-up, the specific values have
to be checked and reviewed once
installed or fitted.
For detailed information on the
measuring set-up, please contact
ebm-papst.
Curves n
rpm
Pe
W
I
A
LpAin
dB(A)
LwAin
dB(A)
3160 69 0.63 64 72
3120 75 0.68 62 70
3100 80 0.70 61 69
3100 76 0.69 61 69
2945 59 0.96 62 70
2885 62 1.00 61 69
2850 65 1.00 59 68
2845 64 1.00 59 68
(1) Nominal data at maximum load.
Nominal Data
Air flow
Phase
Voltage
Voltage range
Frequency
Power input (1)
Speed (1)
Current draw (1)
Max back pressure
Temperature range (1)
Mass
Bearing
Ingress protection rating
UL
Chart
Type Motor cfm VAC VAC Hz W rpm A in. H20 °C lbs
K3G200-AD21-01 M3G055-BI 547 1~230V 200...240 50/60 80 3100 0.7 0.884 -25...60 4.41 Ball IP54 Yes
K3G200-AD11-02 M3G055-BI 506 1~115V 100...130 50/60 65 2850 1.0 0.723 -25...60 4.41 Ball IP54 Yes
A
B
B
A
K3G200-ADXX-XX Dimensions shown in millimeters
Connection screen
Conn. Designation Color Function/assignment
CON10 L black Power supply for voltage range refer to rating plate
CON11 N blue Neutral conductor
CON12 PE green/yellow Protective earth
1 GND blue GND-Connection for control interface
2 0- 10V PWM yellow Control input0-10Vor PWM, electrically isolated
3 10V/ max 1.1mA red Voltage output 10V/1.1 mA, electrically isolated
4 Tach white Tach output: open collector,1pulse per revolution, electrically isolated, Isink max=10 mA
