Compact Diagonal Series K3G200-AD O 200 mm Bearing Ingress protection rating UL Chart 506 Mass M3G055-BI Temperature range (1) K3G200-AD11-02 Max back pressure 547 Current draw (1) M3G055-BI Speed (1) K3G200-AD21-01 Power input (1) cfm Frequency Motor Voltage range Type Voltage Nominal Data VAC VAC Hz W rpm A in. H20 C lbs 230V 200...240 50/60 80 3100 0.7 0.884 -25...60 4.41 Ball IP54 Yes A 115V 100...130 50/60 65 2850 1.0 0.723 -25...60 4.41 Ball IP54 Yes B Phase Air flow Highlights: - Control Input: 0-10 VDC/PWM - Output: 10 VDC, max 1.1 mA - Tach Output - Over-temperature protected electronics/motor - Soft start, motor current limit - Locked rotor protection Material: Impeller: PA plastic Housing: PP plastic Mounting position: Any Condensate discharge holes: None, open rotor Direction of rotation: Clockwise, seen on rotor 1~ 1~ (1) Nominal data at maximum load. Curves in. wg Air performance measured as per: ISO 5801, Installation category A, without protection against accidental contact. 1.60 1.40 1.20 Suction-side noise levels: LWA as per ISO 13347, LPA measured at 1m distance to fan axis. A 1.00 The values given are valid under the measuring conditions mentioned and may vary accoring to the actual installation situation. 4 B 0.80 8 With any deviation to the standard set-up, the specific values have to be checked and reviewed once installed or fitted. 3 0.60 7 0.40 6 pfs 0.20 0.00 0 q 100 200 300 400 2 For detailed information on the measuring set-up, please contact ebm-papst. 5 500 1 cfm 600 n Pe I LpAin LwAin rpm W A dB(A) dB(A) 3160 69 0.63 64 72 3120 75 0.68 62 70 3100 80 0.70 61 69 3100 76 0.69 61 69 2945 59 0.96 62 70 2885 62 1.00 61 69 2850 65 1.00 59 68 2845 64 1.00 59 68 K3G200-ADXX-XX Dimensions shown in millimeters Connection screen Conn. Designation Color CON10 L black Function / assignment Power supply for voltage range refer to rating plate CON11 N blue Neutral conductor CON12 PE green/yellow Protective earth 1 GND blue GND - Connection for control interface 2 0- 10V PWM yellow Control input 0 - 10 V or PWM, electrically isolated 3 10V/ max 1.1mA red Voltage output 10 V / 1.1 mA, electrically isolated 4 Tach white Tach output: open collector, 1 pulse per revolution, electrically isolated, Isink max = 10 mA