6KA24 www.vishay.com Vishay General Semiconductor PAR(R) Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES * Junction passivation optimized design passivated anisotropic rectifier technology * TJ = 185 C capability suitable for high reliability and automotive requirement * Excellent clamping capability * Low leakage current * High surge capability P600 * Solder dip 275 C max. 10 s, per JESD 22-B106 * AEC-Q101 qualified * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PRIMARY CHARACTERISTICS VWM 24 V VBR 26.7 V to 32.6 V PPPM (10 x 1000 s) 6000 W PPPM (10 s/50 ms) 2000 W PD 6.5 W IRSM 90 A IFSM 400 A TJ max. 185 C Polarity Uni-directional Package P600 Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection application. MECHANICAL DATA Case: P600, molded epoxy over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified ("_X" denotes revision code e.g. A, B, .....) Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test per Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER Peak pulse power dissipation SYMBOL with 10/1000 s waveform (1) LIMIT PPPM with 10s/50 ms waveform (2) Power dissipation on infinite heatsink at TL = 75 C (fig. 3) UNIT 6000 W 2000 PD 6.5 W Maximum working stand-off voltage VWM 24 V Peak forward surge current 8.3 ms single half sine-wave (3) IFSM 400 A TJ, TSTG -65 to +185 C Operating junction and storage temperature range Notes (1) Non-repetitive current pulse, per fig. 2, with a 10/1000s waveform (2) Non-repetitive current pulse, per fig. 5, with a 10 s/50 ms waveform (3) Measured on 8.3 ms half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) DEVICE TYPE 6KA24 BREAKDOWN VOLTAGE VBR AT IT (V) MIN. MAX. 26.7 32.6 TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) 100 24 Revision: 08-Nov-16 Document Number: 88309 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6KA24 www.vishay.com Vishay General Semiconductor ADDITIONAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum DC reverse leakage current VWM = 24 V Reverse breakdown voltage 100 mA Maximum clamping voltage IPP = 90 A (1) Maximum instantaneous forward voltage 100 A (2) SYMBOL TA = 25 C LIMIT ID TA = 150 C TA = 150 C min. TA = 25 C 29.7 V 36.7 40 VC TA = 150 C A 50 VBR TA = 150 C max. UNIT 1.0 V 45 VF 1.8 V Notes (1) Measured on 80 s square pulse width (2) Measured on 300 s square pulse width ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 6KA24HE3_A/C (1) 2.710 C 800 13" diameter paper tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 150 Non-Repetitive Pulse Waveform shown in Fig. 2 TA = 25 C 10 1 1.0 s IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 s Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 s Waveform as defined by R.E.A. td 0 10 s 100 s 1.0 ms 10 ms 100 ms 0 1.0 2.0 3.0 td - Pulse Width (s) t - Time (ms) Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - 10/1000 s Pulse Waveform 4.0 Revision: 08-Nov-16 Document Number: 88309 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6KA24 www.vishay.com Vishay General Semiconductor 100 150 IPPM - Peak Pulse Current, % IPP Percentage of Rated Power (%) Power Dissipation 75 Peak Power (Single Pulse) TJ = Initial Temperature 50 L = 0.375" (9.5 mm) Lead Lengths 25 TJ = 25 C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 s Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10 s/50 ms Waveform as defined by R.E.A. td 0 0 0 50 100 150 0 175 50 100 150 TL - Lead Temperature (C) t - Time (ms) Fig. 3 - Pulse Derating Curve Fig. 5 - 10 s/50 ms Pulse Waveform 200 Peak Forward Surge Current (A) 400 TJ = TJ max. 8.3 ms Single Half Sine-Wave 350 300 250 200 150 100 1 5 10 50 100 Number of Cycles at 60 Hz Fig. 4 - Maximum Non-Repetitive Peak Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) P600 1.0 (25.4) MIN. 0.360 (9.1) 0.340 (8.6) 0.360 (9.1) 0.340 (8.6) 0.052 (1.32) 0.048 (1.22) DIA. 1.0 (25.4) MIN. Revision: 08-Nov-16 Document Number: 88309 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000