Power Module 1 LBRQ-2B54A General Specification Class 2 (4dBm) BluetoothTM RF module for mobile phone with any of the BluetoothTM enabled QUALCOMM MSM chipset. Dimension : 5.0x4.0x1.4mm Temperature Range : -30 ~ +75 Supply Voltage : VDD_BAT - 1.9V to 3.6V VDD_MSM - 1.62 to 2.92V Output Power : +0dBm (Typical) Class 2 Sensitivity : -86dBm (Typical) Interface : BlueQ Bluetooth Specification Ver1.1, 1.2 Compliant * * * * * * * * Pin Description No. Pin Name I/O Description 1 GND - 2 VDD_INT O Regulated 1.8V output from internal regulator (Core) 3 VCC_OUT O Regulated 1.8V output from internal regulator (VCO) 4 XTAL_IN I Crystal input or TCXO input (12, 19.2, 19.68 and 19.8MHz) 5 SYNC_DET/TX_EN I Multipurpose pin: Rx slot - Rx_Enable and synchronization detection ; Tx slot - Tx_En and Tx path data transfer indication 6 SBST I Serial interface mode control 7 GND - 8 RX_BB/TX_BB 9 CLK_REF O System clock, 12-MHz clock output derived from the XTAL_IN reference 10 SBCK I Serial interface clock signal 11 SBDT I/O 12 VDD_MSM I 13 NC - 14 VDD_BAT I 15 GND - 16 ANT I/O I/O Bidirectional Tx and Rx data interface pin Serial interface data Digital interface reference voltage Input supply to on-chip regulator Single-ended Tx and Rx RF interface 2 LBRQ-2B54A Major Spec General Performance Parameter Condition Min Frequency Range Typ 2402 Max Unit 2480 MHz Ohm Impedance at Antenna - 50 - VSWR of Antenna - 2:1 - Min Typ Max Unit - -86 - -70 -70 11 0 -30 -40 -9 -20 dBm dBm dB dB dB dB dB dB 30MHz ~ 2000MHz -10 - - dBm 2000MHz ~ 2400MHz 2500MHz ~ 3000MHz 3000MHz ~ 12.75GHz Input=-64dBm, n=5 -27 -27 -10 -39 - - dBm dBm dBm dBm -20 - - dBm Receiver Performance Parameter Sensitivity level (BER0.1%) Sensitivity level (BER0.1%) C/I performance1) (BER0.1%) Out-of-band Blocking2) (BER0.1%) Intermodulation (BER0.1%) Condition Single slot Multi slot C/I co-channel , Input=-60dBm C/I 1MHz , Input=-60dBm C/I 2MHz , Input=-60dBm C/I 3MHz , Input=-67dBm Image radio , Input=-67dBm Image1 , Input=-67dBm Maximum Input Level (BER0.1%) Transmitter Performance Min Typ Max Unit Transmit Power Parameter Condition -6 - 4 dBm Power density - - 20 dBm MHz Frequency Range 2402 - 2483.5 20dB bandwidth - - 1000 KHz 2MHz - - -20 dBm 3MHz - - -40 dBm 4MHz - - -40 dBm 30MHz ~ 1GHz - - -36 dBm 1GHz ~ 12.75GHz - - -30 dBm 1.8GHz ~ 1.9GHz - - -47 dBm Adjacent channel power3) Out-band Spurious Emission 5.1GHz ~ 5.3GHz Modulation Characteristics - - -47 dBm F1avg 140 - 175 KHz F2max 115 - - KHz F2avg/F1avg 80 - - % Initial Carrier Frequency Tolerance -75 - 75 KHz Carrier Frequency Drift -25 - 25 KHz 3 LBRQ-2B54A Dimensions 4.00 4.00 (13) (9) 0.30 0.30 0.40 0.75 (14) (8) 0.40 0.80 0.60 0.40 5.00 1.20 0.60 1.10 0.40 1.20 5.00 (16) (6) (1) (5) 1.35 4 LBRQ-2B54A Product Code System L B R Q - 2 B 5 4 A Module Type R Radio Module Host Interface Q BlueQ Power Class 2 Class 2 Size 54 5.0mmx x4.0mm Revision A A Version 5