Photoelectric Sensors SU16 Series * * * * DIN rail mountable Light on/dark on selectable Mutual interference protection Pigtail quick disconnect or cable versions Fiber Optic Diffused and Thru-Beam Mode See page 708 2 versions available: * High sensitivity/high power * High speed (/130) Sensing Range: Determined by fiber optic cable Output: NPN, PNP Photoelectric SU16 Series Fiber Optic Fiber Optic Photoelectric Sensors See pages 709-710 for SU16 Series specifications, wiring and dimensions. PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 707 Photoelectric Sensors Photoelectric SU16 Series Fiber Optic Fiber Optic Diffused and Thru-Beam Mode Specifications High Power High Speed Determined by cable* Determined by cable* Determined by cable* Yes Yes Yes SU16-K/102/115/126a SU16-K/102/115b/126a SU16-K/102/115/126a/130 SU16-K/82a/103/115 SU16-K/82a/103/115b SU16-K/82a/103/115/130 /102 1 NPN 1 NPN 1 NPN /103 1 PNP 1 PNP 1 PNP SENSING RANGE SENSITIVITY ADJUSTMENT MODEL NUMBER(S) OUTPUT: Transistor, Open Collector SUPPLY VOLTAGE 10-30VDC 10-30VDC 10-30VDC HYSTERESIS 10.6% 10.6% 20% RESPONSE TIME 500s 500s 50s on/70s off 1kHz 1kHz 8kHz Visible red LED Visible red LED Visible red LED SWITCHING FREQUENCY LIGHT SOURCE ELECTRICAL CONNECTION 152mm pigtail, PVC covered, quick disconnect type V1 2-meter cable, PVC covered 4-conductor 2-meter cable, PVC covered 4-conductor See pages 709-710 ADDITIONAL DATA Mounting Instructions The 35mm DIN mounting track provides an easy method for mounting P+F sensing amplifiers. The track is available in 1-meter sections. 1. Latch the amplifier unit onto DIN rail. 2. Push the amplifier downwards until locking tab is secured. 3. For extra mounting support, optional EW35 end brackets should be installed. (Sold separately) *See pages 731-762 for glass and plastic fiber optic lengths and specifications. 708 PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com Photoelectric Sensors Series Specifications Wiring Diagrams LOAD CURRENT 100mA max. VOLTAGE DROP 1.0VDC SHORT CIRCUIT AND OVERLOAD PROTECTION Yes REVERSE POLARITY PROTECTION Yes VOLTAGE RIPPLE 10% DC Cable Connection Light On/Dark On LED(s) Yes (2) CURRENT CONSUMPTION 35mA NPN Output (-) PNP Output Brown Orange Black /103 (+) Weak Signal Load Blue AMPLIFIER -4F to +140F FIBER-OPTIC CABLE -22F to +158F STORAGE TEMPERATURE RANGE -40F to +158F (-) Quick Disconnect Note: Wiring diagrams show quick disconnect pin numbers. V1 Type No General Purpose No Black NPN Output 1 Brown /102 General Purpose Male Receptacle End View Light On/Dark On Polycarbonate HOUSING MATERIAL APPROVALS Weak Signal IP40 PROTECTION (IEC) WORKING TEMPERATURE RANGE Load Light On/Dark On 40 10ms OPTIONAL OFF DELAY TIMING (+) Black Orange Blue Light on/dark on OPERATING MODE Brown /102 4 Black 2 White 3 Blue LISTED Blue (+) Load Weak Signal (-) 4 3 1 2 Load (-) White Weak Signal Brown (+) CERTIFIED Light On/Dark On Black PNP Output /103 1 Brown 2 White 4 Black 3 Blue (+) Weak Signal Load (-) Blue 4 3 1 2 Load (-) Photoelectric SU16 Series Fiber Optic SU16 Series Specifications Weak Signal White Brown (+) Attaching Fiber Optic Cables to SU16 Series Lever Standard Fiber (o2.2mm diameter) Fiber 1. Unlock the lever on the top of the amplifier. The lever will spring open. 2. Insert a standard 2 mm diameter fiber optic cable into the housing until the cable goes no farther. For 1 mm diameter cables, insert the adapter and then slide the cable through until the cable stops. Slim Fiber (o1mm diameter) 3. Turn the lever so that it locks. If the lever is not locked, the spring will push it open. PEPPERL+FUCHS Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com 709 Photoelectric Sensors Dimensions (mm) SU16 Series Sensitivity adjustment Light on/dark on Off-delay ON/OFF 1.3 10 M12x1 Photoelectric SU16 Series Fiber Optic LEDs Red: output status Green (flashing): weak signal 28.4 7.6 2X O2.4 13.7 8.4 44.5 O3.3 4 4.2 0.5 22.5 12.4 16 34.8 DIN rail or bracket 60 Accessories 35mm DIN Mounting Track (sold in lengths of 1m) See pages 731-762 for glass and plastic fiber optic lengths and specifications. 710 PEPPERL+FUCHS DIN Track End Bracket Model EW35 See pages 767-812 for cordsets See pages 825-836 additional accessories for photoelectric sensors Pepperl+Fuchs(R) Inc. * 1600 Enterprise Parkway * Twinsburg, Ohio 44087-2245 * www.am.pepperl-fuchs.com Telephone (330) 486-0001 * FAX (330) 405-4710 * E-Mail: sales@us.pepperl-fuchs.com