Photoelectric SU16 Series Fiber Optic
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
707
SU16 Series
Fiber Optic
Photoelectric Sensors
• DIN rail mountable
• Light on/dark on selectable
• Mutual interference protection
• Pigtail quick disconnect or cable versions
Fiber Optic Diffused and
Thru-Beam Mode
See page 708
2 versions available:
• High sensitivity/high power
• High speed (/130)
Sensing Range: Determined by fiber optic cable
Output: NPN, PNP
See pages 709-710 for SU16 Series specifications, wiring and dimensions.
High Power High Speed
Photoelectric SU16 Series Fiber Optic
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
708
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
Specifications
SENSING RANGE
SENSITIVITY ADJUSTMENT
MODEL NUMBER(S)
/102
/103
SUPPLY VOLTAGE
HYSTERESIS
RESPONSE TIME
SWITCHING FREQUENCY
LIGHT SOURCE
ELECTRICAL CONNECTION
ADDITIONAL DATA
Determined by cable*
Yes
SU16-K/102/115/126a
SU16-K/82a/103/115
1 NPN
1 PNP
10-30VDC
10.6%
≤500µs
1kHz
Visible red LED
2-meter cable,
PVC covered
4-conductor
OUTPUT: Transistor,
Open Collector
Fiber Optic Diffused and Thru-Beam Mode
Determined by cable*
Yes
SU16-K/102/115b/126a
SU16-K/82a/103/115b
1 NPN
1 PNP
10-30VDC
10.6%
≤500µs
1kHz
Visible red LED
152mm pigtail,
PVC covered, quick
disconnect type V1
Determined by cable*
Yes
SU16-K/102/115/126a/130
SU16-K/82a/103/115/130
1 NPN
1 PNP
10-30VDC
20%
≤50µs on/≤70µs off
8kHz
Visible red LED
2-meter cable,
PVC covered
4-conductor
See pages 709-710
*See pages 731-762 for
glass and plastic fiber optic
lengths and specifications.
The 35mm DIN mounting track provides an easy method for mounting
P+F sensing amplifiers. The track is available in 1-meter sections.
Mounting Instructions
1. Latch the
amplifier unit
onto DIN rail.
2. Push the amplifier
downwards until
locking tab is secured.
3. For extra mounting support, optional
EW35 end brackets should be installed.
(Sold separately)
Photoelectric SU16 Series Fiber Optic
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
709
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
LOAD CURRENT
VOLTAGE DROP
SHORT CIRCUIT AND
OVERLOAD PROTECTION
REVERSE POLARITY PROTECTION
VOLTAGE RIPPLE
LED(s)
CURRENT CONSUMPTION
OPERATING MODE
OPTIONAL OFF DELAY TIMING
PROTECTION (IEC)
WORKING AMPLIFIER
TEMPERATURE
FIBER-OPTIC
RANGE
CABLE
STORAGE
TEMPERATURE RANGE
HOUSING MATERIAL
APPROVALS General Purpose
LISTED
General Purpose
CERTIFIED
100mA max.
≤1.0VDC
Yes
Yes
10%
Yes (2)
≤35mA
Light on/dark on
40 ±10ms
IP40
-4ºF to +140ºF
-22ºF to +158ºF
-40ºF to +158ºF
Polycarbonate
No
No
Wiring Diagrams
Note: Wiring diagrams show
quick disconnect pin numbers.
DC
Quick Disconnect
Series Specifications
SU16 Series Specifications
V1 Type
Cable Connection
Brown
Orange
Blue
(+)
( – )
Black
Load
/
103
Light On/Dark On
PNP Output
Weak
Signal
Brown
Orange
Blue
(+)
( – )
Black Load
/
102
Light On/Dark On
NPN Output
Weak
Signal
12
43
Blue
Black
Brown
White
Load
(+)
( – )
1 Brown
2 White
3 Blue
(+)
( – )
4 Black
Load
/
103
Light On/Dark On
PNP Output
Weak
Signal
Weak
Signal
12
43
Blue
Black
Brown
White
Load (+)
( – )
1 Brown
2 White
3 Blue
(+)
( – )
4 Black Load
/
102
Light On/Dark On
NPN Output
Weak
Signal
Weak
Signal
Male Receptacle End View
Attaching Fiber Optic Cables
to SU16 Series
Lever
Fiber
1. Unlock the lever on the top of the amplifier. The
lever will spring open.
2. Insert a standard 2 mm diameter fiber optic cable
into the housing until the cable goes no farther. For
1 mm diameter cables, insert the adapter and then
slide the cable through until the cable stops.
3. Turn the lever so that it locks. If the lever is not
locked, the spring will push it open.
Standard Fiber (ø2.2mm diameter)
Slim Fiber (ø1mm diameter)
Photoelectric SU16 Series Fiber Optic
Photoelectric Sensors
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
710
M12x1
0.5
10
28.4
13.7
1.3
4.2
4
7.6
8.4
2X Ø2.4
Sensitivity adjustment
LEDs
Red: output status
Green (flashing): weak signal Light on/dark on
Off-delay ON/OFF
DIN rail or bracket
1622.5
34.8
44.5
60
12.4
Ø3.3
Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com
Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com
®
PEPPERL+FUCHS
Dimensions (mm)
SU16 Series
See pages 731-762 for
glass and plastic fiber optic
lengths and specifications.
See pages
767-812 for
cordsets
See pages 825-836
additional accessories
for photoelectric sensors
Accessories
35mm DIN Mounting Track
(sold in lengths of 1m)
DIN Track End Bracket Model EW35
