Octal, 14-Bit, 65 MSPS, Serial LVDS, 1.8 V Analog-to-Digital Converter AD9257-EP Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM AVDD AD9257-EP ADC VIN+ B VIN- B ADC VIN+ C VIN- C ADC VIN+ D VIN- D ADC VIN+ E VIN- E ADC VIN+ F VIN- F ADC VIN+ G VIN- G ADC VIN+ H VIN- H ADC Medical imaging and nondestructive ultrasound Portable ultrasound and digital beam forming systems Quadrature radio receivers Diversity radio receivers Optical networking Test equipment GENERAL DESCRIPTION The AD9257-EP is an octal, 14-bit, 65 MSPS analog-to-digital converter (ADC) with an on-chip sample-and-hold circuit designed for low cost, low power, small size, and ease of use. The product operates at a conversion rate of up to 65 MSPS and is optimized for outstanding dynamic performance and low power in applications where a small package size is critical. The ADC requires a single 1.8 V power supply and LVPECL-/ CMOS-/LVDS-compatible sample rate clock for full performance operation. No external reference or driver components are required for many applications. The ADC automatically multiplies the sample rate clock for the appropriate LVDS serial data rate. A data clock output (DCO) for capturing data on the output and a frame clock output (FCO) for signaling a new output byte are provided. Individual channel Rev. A D+ A D- A SERIAL LVDS 14 SERIAL LVDS D+ B D- B SERIAL LVDS D+ C D- C SERIAL LVDS D+ D D- D SERIAL LVDS D+ E D- E SERIAL LVDS D+ F D- F SERIAL LVDS D+ G D- G SERIAL LVDS D+ H D- H 14 14 14 14 14 14 VREF SENSE ENHANCED PRODUCT FEATURES APPLICATIONS DRVDD 14 VIN+ A VIN- A VCM Supports defense and aerospace applications (AQEC standard) Military temperature range (-55C to +125C) Controlled manufacturing baseline Qualification data available on request PDWN 1.0V SERIAL PORT INTERFACE REF SELECT DATA RATE MULTIPLIER SYNC RBIAS AGND CSB SDIO/ SCLK/ DFS DTP CLK+ CLK- FCO+ FCO- DCO+ DCO- 12740-001 Low power: 55 mW per channel at 65 MSPS with scalable power options SNR = 75.5 dB (to Nyquist) SFDR = 91 dBc (to Nyquist) DNL = 0.6 LSB (typical), INL = 1.1 LSB (typical) Serial LVDS (ANSI-644, default) Low power, reduced signal option (similar to IEEE 1596.3) Data and frame clock outputs 650 MHz full power analog bandwidth 2 V p-p input voltage range 1.8 V supply operation Serial port control Full chip and individual channel power-down modes Flexible bit orientation Built-in and custom digital test pattern generation Programmable clock and data alignment Programmable output resolution Standby mode Figure 1. power-down is supported and typically consumes 1 mW when all channels are disabled. The ADC contains several features designed to maximize flexibility and minimize system cost, such as programmable clock and data alignment and programmable digital test pattern generation. The available digital test patterns include built-in deterministic and pseudorandom patterns, along with custom user defined test patterns entered via the serial port interface (SPI). The AD9257-EP is available in an RoHS-compliant, 64-lead LFCSP. It is specified over the -55C to +125C temperature. This product is protected by a U.S. patent. Additional application and technical information can be found in the AD9257 data sheet. PRODUCT HIGHLIGHTS 1. 2. 3. 4. 5. Small Footprint. Eight ADCs are contained in a small, space-saving package. Low Power of 55 mW/Channel at 65 MSPS with Scalable Power Options. Ease of Use. A DCO is provided that operates at frequencies of up to 455 MHz and supports double data rate (DDR) operation. User Flexibility. The SPI control offers a wide range of flexible features to meet specific system requirements. Pin Compatible with the AD9637 (12-Bit Octal ADC). Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 (c)2015 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com AD9257-EP Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Switching Specifications ...............................................................6 Enhanced Product Features ............................................................ 1 Timing Specifications ...................................................................6 Applications ....................................................................................... 1 Absolute Maximum Ratings ............................................................9 General Description ......................................................................... 1 Thermal Characteristics ...............................................................9 Functional Block Diagram .............................................................. 1 ESD Caution...................................................................................9 Product Highlights ........................................................................... 1 Pin Configuration and Function Descriptions........................... 10 Revision History ............................................................................... 1 Typical Performance Characteristics ........................................... 12 Specifications..................................................................................... 3 Outline Dimensions ....................................................................... 13 DC Specifications ......................................................................... 3 Ordering Guide .......................................................................... 13 AC Specifications.......................................................................... 4 Digital Specifications ................................................................... 5 REVISION HISTORY 6/15--Rev. 0 to Rev. A Changes to Table 2 ............................................................................ 4 Changes to Table 3 ............................................................................ 5 Changes to Table 6 ............................................................................ 9 Changes to Figure 6 ........................................................................ 10 2/15--Revision 0: Initial Version Rev. A | Page 2 of 13 Data Sheet AD9257-EP SPECIFICATIONS DC SPECIFICATIONS AVDD = 1.8 V, DRVDD = 1.8 V, 2 V p-p differential input, 1.0 V internal reference, AIN = -1.0 dBFS, unless otherwise noted. Table 1. Parameter1 RESOLUTION ACCURACY No Missing Codes Offset Error Offset Matching Gain Error Gain Matching Differential Nonlinearity (DNL) Integral Nonlinearity (INL) TEMPERATURE DRIFT Offset Error INTERNAL VOLTAGE REFERENCE Output Voltage (1 V Mode) Load Regulation at 1.0 mA (VREF = 1 V) Input Resistance INPUT REFERRED NOISE VREF = 1.0 V ANALOG INPUTS Differential Input Voltage (VREF = 1 V) Common-Mode Voltage Common-Mode Range Differential Input Resistance Differential Input Capacitance POWER SUPPLY AVDD DRVDD IAVDD IDRVDD (ANSI-644 Mode) IDRVDD (Reduced Range Mode) TOTAL POWER CONSUMPTION Total Power Dissipation (Eight Channels, ANSI-644 Mode) Total Power Dissipation (Eight Channels, Reduced Range Mode) Power-Down Dissipation Standby Dissipation2 1 2 Temp Full Full Full Full Full Full Full Min 14 -0.7 0 -7.0 -1.0 -0.95 -4.5 Full Full Full Full Typ Max Unit Bits Guaranteed -0.3 0.23 -2.9 +1.6 0.6 1.1 +0.1 0.6 +1.0 +5.0 +1.6 +4.5 % FSR % FSR % FSR % FSR LSB LSB 2 0.98 0.99 2 7.5 ppm/C 1.01 V mV k 25C 0.94 LSB rms Full Full Full 2 0.9 V p-p V V k pF 0.5 Full Full Full Full Full 25C Full 25C 25C 25C 1.3 5.2 3.5 1.7 1.7 1.8 1.8 198 60 45 1.9 1.9 211 93 V V mA mA mA 464 437 1 92 547 mW mW mW mW See the AN-835 Application Note, Understanding High Speed ADC Testing and Evaluation, for definitions and for details on how these tests were completed. Can be controlled via the SPI. Rev. A | Page 3 of 13 AD9257-EP Data Sheet AC SPECIFICATIONS AVDD = 1.8 V, DRVDD = 1.8 V, 2 V p-p differential input, 1.0 V internal reference, AIN = -1.0 dBFS, unless otherwise noted. CLK divider = 8 used for typical characteristics at input frequency 19.7 MHz. Table 2. Parameter1 SIGNAL-TO-NOISE RATIO (SNR) fIN = 9.7 MHz fIN = 19.7 MHz fIN = 30.5 MHz fIN = 63.5 MHz fIN = 123.4 MHz SIGNAL-TO-NOISE AND DISTORTION RATIO (SINAD) fIN = 9.7 MHz fIN = 19.7 MHz fIN = 30.5 MHz fIN = 63.5 MHz fIN = 123.4 MHz EFFECTIVE NUMBER OF BITS (ENOB) fIN = 9.7 MHz fIN = 19.7 MHz fIN = 30.5 MHz fIN = 63.5 MHz fIN = 123.4 MHz SPURIOUS-FREE DYNAMIC RANGE (SFDR) fIN = 9.7 MHz fIN = 19.7 MHz fIN = 30.5 MHz fIN = 63.5 MHz fIN = 123.4 MHz WORST HARMONIC (SECOND OR THIRD) fIN = 9.7 MHz fIN = 19.7 MHz fIN = 30.5 MHz fIN = 63.5 MHz fIN = 123.4 MHz WORST OTHER (EXCLUDING SECOND OR THIRD) fIN = 9.7 MHz fIN = 19.7 MHz fIN = 30.5 MHz fIN = 63.5 MHz fIN = 123.4 MHz TWO-TONE INTERMODULATION DISTORTION (IMD)--AIN1 AND AIN2 = -7.0 dBFS fIN1 = 30 MHz, fIN2 = 32 MHz CROSSTALK2 Crosstalk (Overrange Condition)3 POWER SUPPLY REJECTION RATIO (PSRR)4 AVDD DRVDD ANALOG INPUT BANDWIDTH, FULL POWER Temp 25C Full 25C 25C 25C 25C Full 25C 25C 25C 25C Full 25C 25C 25C 25C Full 25C 25C 25C Min 72.8 70.9 11.5 78 Typ Max Unit 75.7 75.6 75.5 74.9 73.2 dBFS dBFS dBFS dBFS dBFS 75.6 75.6 75.4 74.8 72.8 dBFS dBFS dBFS dBFS dBFS 12.3 12.3 12.2 12.1 11.8 Bits Bits Bits Bits Bits 96 96 91 95 83 dBc dBc dBc dBc dBc 25C Full 25C 25C 25C -99 -98 -91 -98 -83 25C Full 25C 25C 25C -96 -96 -98 -95 -94 25C 25C 25C 25C 92 -98 -94 dBc dB dB 52 71 650 dB dB MHz 25C -78 -86 dBc dBc dBc dBc dBc dBc dBc dBc dBc dBc See the AN-835 Application Note, Understanding High Speed ADC Testing and Evaluation, for definitions and for details on how these tests were completed. Crosstalk is measured at 10 MHz with -1.0 dBFS analog input on one channel and no input on the adjacent channel. Overrange condition is 3 dB above the full-scale input range. 4 PSRR is measured by injecting a sinusoidal signal at 10 MHz to the power supply pin and measuring the output spur on the FFT. PSRR is calculated as the ratio of the amplitudes of the spur voltage over the pin voltage, expressed in decibels. 1 2 3 Rev. A | Page 4 of 13 Data Sheet AD9257-EP DIGITAL SPECIFICATIONS AVDD = 1.8 V, DRVDD = 1.8 V, 2 V p-p differential input, 1.0 V internal reference, AIN = -1.0 dBFS, unless otherwise noted. Table 3. Parameter1, 2 CLOCK INPUTS (CLK+, CLK-) Logic Compliance Differential Input Voltage3 Input Voltage Range Input Common-Mode Voltage Input Resistance (Differential) Input Capacitance LOGIC INPUTS (PDWN, SYNC, SCLK) Logic 1 Voltage Logic 0 Voltage Input Resistance Input Capacitance LOGIC INPUT (CSB) Logic 1 Voltage Logic 0 Voltage Input Resistance Input Capacitance LOGIC INPUT (SDIO) Logic 1 Voltage Logic 0 Voltage Input Resistance Input Capacitance LOGIC OUTPUT (SDIO)4 Logic 1 Voltage (IOH = 800 A) Logic 0 Voltage (IOL = 50 A) DIGITAL OUTPUTS (D x), ANSI-644 Logic Compliance Differential Output Voltage (VOD) Output Offset Voltage (VOS) Output Coding (Default) DIGITAL OUTPUTS (D x), LOW POWER, REDUCED SIGNAL OPTION Logic Compliance Differential Output Voltage (VOD) Output Offset Voltage (VOS) Output Coding (Default) Temp Min Full Full Full 25C 25C CMOS/LVDS/LVPECL 0.2 3.6 AGND - 0.2 AVDD + 0.2 0.9 15 4 Full Full 25C 25C 1.2 0 Full Full 25C 25C 1.2 0 Full Full 25C 25C 1.2 0 Typ Max V p-p V V k pF AVDD + 0.2 0.8 V V k pF AVDD + 0.2 0.8 V V k pF AVDD + 0.2 0.8 V V k pF 30 2 26 2 26 5 Full Full Unit 1.79 0.05 V V Full Full 247 1.13 LVDS 350 454 1.21 1.38 Twos complement mV V Full Full 150 1.13 LVDS 200 250 1.21 1.38 Twos complement mV V See the AN-835 Application Note, Understanding High Speed ADC Testing and Evaluation, for definitions and for details on how these tests were completed. When referencing a single function of a multifunction pin in the parameters, only the portion of the pin name that is relevant to the specification is listed. For full pin names of multifunction pins, refer to the Pin Configuration and Function Descriptions section. 3 This is specified for LVDS and LVPECL only. 4 This is specified for 13 SDIO/DFS pins sharing the same connection. 1 2 Rev. A | Page 5 of 13 AD9257-EP Data Sheet SWITCHING SPECIFICATIONS AVDD = 1.8 V, DRVDD = 1.8 V, 2 V p-p differential input, 1.0 V internal reference, AIN = -1.0 dBFS, unless otherwise noted. Table 4. Parameter1, 2 CLOCK3 Input Clock Rate Conversion Rate Clock Pulse Width High (tEH) Clock Pulse Width Low (tEL) OUTPUT PARAMETERS3 Propagation Delay (tPD) Rise Time (tR) (20% to 80%) Fall Time (tF) (20% to 80%) FCO Propagation Delay (tFCO) DCO Propagation Delay (tCPD)4 DCO to Data Delay (tDATA)4 DCO to FCO Delay (tFRAME)4 Data to Data Skew (tDATA-MAX - tDATA-MIN) Wake-Up Time (Standby) Wake-Up Time (Power-Down)5 Pipeline Latency APERTURE Aperture Delay (tA) Aperture Uncertainty (Jitter) Out-of-Range Recovery Time Temp Min Full Full Full Full 10 10 Full Full Full Full Full Full Full Full 1.5 Typ Max Unit 520 65 MHz MSPS ns ns 3.1 ns ps ps ns ns ps ps ps 7.69 7.69 1.5 (tSAMPLE/28) - 300 (tSAMPLE/28) - 300 2.3 300 300 2.3 tFCO + (tSAMPLE/28) (tSAMPLE/28) (tSAMPLE/28) 50 3.1 (tSAMPLE/28) + 300 (tSAMPLE/28) + 300 200 25C 25C Full 35 375 16 s s Clock cycles 25C 25C 25C 1 0.1 1 ns ps rms Clock cycles See the AN-835 Application Note, Understanding High Speed ADC Testing and Evaluation, for definitions and for details on how these tests were completed. Measured on standard FR-4 material. 3 Can be adjusted via the SPI. 4 tSAMPLE/28 is based on the number of bits divided by 2 because the delays are based on half duty cycles. tSAMPLE = 1/fS. 5 Wake-up time is defined as the time required to return to normal operation from power-down mode. 1 2 TIMING SPECIFICATIONS Table 5. Parameter SYNC TIMING REQUIREMENTS tSSYNC tHSYNC SPI TIMING REQUIREMENTS1 tDS tDH tCLK tS tH tHIGH tLOW tEN_SDIO tDIS_SDIO 1 Description Limit Unit SYNC to rising edge of CLK+ setup time SYNC to rising edge of CLK+ hold time See Figure 4 Setup time between the data and the rising edge of SCLK Hold time between the data and the rising edge of SCLK Period of the SCLK Setup time between CSB and SCLK Hold time between CSB and SCLK SCLK pulse width high SCLK pulse width low Time required for the SDIO pin to switch from an input to an output relative to the SCLK falling edge (not shown in Figure 4) Time required for the SDIO pin to switch from an output to an input relative to the SCLK rising edge (not shown in Figure 4) 0.24 0.40 ns typ ns typ 2 2 40 2 2 10 10 10 ns min ns min ns min ns min ns min ns min ns min ns min 10 ns min When referring to a single function of a multifunction pin, only the portion of the pin name that is relevant to the specification is listed. For full pin names of multifunction pins, refer to the Pin Configuration and Function Descriptions section. Rev. A | Page 6 of 13 Data Sheet AD9257-EP Timing Diagrams N-1 VIN x tA N tEH tEL CLK- CLK+ tCPD DCO- DCO+ tFCO tFRAME FCO- FCO+ tPD tDATA MSB D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 MSB D12 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 17 N - 16 N - 16 D+ x 12740-002 D- x Figure 2. Word Wise DDR,1x Frame, 14-Bit Output Mode (Default) N-1 VIN x tA N tEH tEL CLK- CLK+ tCPD DCO- DCO+ tFRAME tFCO FCO- FCO+ tPD tDATA MSB N - 17 D10 N - 17 D9 N - 17 D8 N - 17 D7 N - 17 D6 N - 17 D5 N - 17 D4 N - 17 D+ x Figure 3. Word Wise DDR, 1x Frame, 12-Bit Output Mode Rev. A | Page 7 of 13 D3 N - 17 D2 N - 17 D1 N - 17 D0 N - 17 MSB N - 16 D10 N - 16 12740-003 D- x AD9257-EP Data Sheet tHIGH tDS tS tDH CSB tCLK tH tLOW R/W W1 W0 A12 A11 A10 A9 A8 A7 D5 D4 D3 D2 Figure 4. Serial Port Interface Timing Diagram CLK+ tSSYNC tHSYNC 12740-004 SDIO DON'T CARE DON'T CARE SYNC Figure 5. SYNC Input Timing Requirements Rev. A | Page 8 of 13 D1 D0 DON'T CARE 12740-021 SCLK DON'T CARE Data Sheet AD9257-EP ABSOLUTE MAXIMUM RATINGS THERMAL CHARACTERISTICS Table 6. Parameter Electrical AVDD to AGND DRVDD to AGND Digital Outputs (D x, DCO+, DCO-, FCO+, FCO-) to AGND CLK+, CLK- to AGND VIN+ x, VIN- x to AGND SCLK/DTP, SDIO/DFS, CSB to AGND SYNC, PDWN to AGND RBIAS, VCM to AGND VREF, SENSE to AGND Environmental Operating Temperature Range (Ambient) Maximum Junction Temperature Lead Temperature (Soldering, 10 sec) Storage Temperature Range (Ambient) Rating -0.3 V to +2.0 V -0.3 V to +2.0 V -0.3 V to +2.0 V -0.3 V to +2.0 V -0.3 V to +2.0 V -0.3 V to +2.0 V -0.3 V to +2.0 V -0.3 V to +2.0 V -0.3 V to +2.0 V The exposed pad must be soldered to the ground plane for the LFCSP package. Soldering the exposed pad to the PCB increases the reliability of the solder joints and maximizes the thermal capability of the package. Table 7. Thermal Resistance Package Type 64-Lead LFCSP 9 mm x 9 mm (CP-64-4) Airflow Velocity (m/sec) 0 1.0 2.5 JA1, 2 22.3 19.5 17.5 JC1, 3 1.4 N/A N/A JB1, 4 N/A 11.8 N/A JT1, 2 0.1 0.2 0.2 Unit C/W C/W C/W 1 Per JEDEC 51-7, plus JEDEC 25-5 2S2P test board. Per JEDEC JESD51-2 (still air) or JEDEC JESD51-6 (moving air). Per MIL-Std 883, Method 1012.1. 4 Per JEDEC JESD51-8 (still air). 2 3 -55C to +125C 150C 300C -65C to +150C Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. Typical JA is specified for a 4-layer PCB with a solid ground plane. As shown Table 7, airflow improves heat dissipation, which reduces JA. In addition, metal in direct contact with the package leads from metal traces, through holes, ground, and power planes reduces JA. ESD CAUTION Rev. A | Page 9 of 13 AD9257-EP Data Sheet 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 VIN+ F VIN- F AVDD VIN- E VIN+ E AVDD SYNC VCM VREF SENSE RBIAS VIN+ D VIN- D AVDD VIN- C VIN+ C PIN CONFIGURATION AND FUNCTION DESCRIPTIONS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 AD9257-EP TOP VIEW (Not to Scale) 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 AVDD VIN+ B VIN- B AVDD VIN- A VIN+ A AVDD PDWN CSB SDIO/DFS SCLK/DTP AVDD NIC DRVDD D+ A D- A NOTES 1. NIC = NOT INTERNALLY CONNECTED. THESE PINS CAN BE CONNECTED TO GROUND. 2. THE EXPOSED THERMAL PAD ON THE BOTTOM OF THE PACKAGE PROVIDES THE ANALOG GROUND FOR THE DEVICE. THIS EXPOSED PAD MUST BE CONNECTED TO GROUND FOR PROPER OPERATION. 12740-005 D- G D+ G D- F D+ F D- E D+ E DCO- DCO+ FCO- FCO+ D- D D+ D D- C D+ C D- B D+ B 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 AVDD VIN+ G VIN- G AVDD VIN- H VIN+ H AVDD AVDD CLK- CLK+ AVDD AVDD NIC DRVDD D- H D+ H Figure 6. Pin Configuration, Top View Table 8. Pin Function Descriptions Pin No. 0 Mnemonic AGND, EP 1, 4, 7, 8, 11, 12, 37, 42, 45, 48, 51, 59, 62 13, 36 14, 35 2, 3 5, 6 9, 10 15, 16 17, 18 19, 20 21, 22 23, 24 25, 26 27, 28 29, 30 31, 32 33, 34 38 39 40 41 43, 44 46, 47 49, 50 AVDD Description Analog Ground, Exposed Pad. The exposed thermal pad on the bottom of the package provides the analog ground for the device. This exposed pad must be connected to ground for proper operation. 1.8 V Analog Supply. NIC DRVDD VIN+ G, VIN- G VIN- H, VIN+ H CLK-, CLK+ D- H, D+ H D- G, D+ G D- F, D+ F D- E, D+ E DCO-, DCO+ FCO-, FCO+ D- D, D+ D D- C, D+ C D- B, D + B D- A, D+ A SCLK/DTP SDIO/DFS CSB PDWN VIN+ A, VIN- A VIN- B, VIN+ B VIN+ C, VIN- C Not Internally Connected. These pins can be connected to ground. 1.8 V Digital Output Driver Supply. ADC G Analog Input True, ADC G Analog Input Complement. ADC H Analog Input Complement, ADC H Analog Input True. Input Clock Complement, Input Clock True. ADC H Digital Output Complement, ADC H Digital Output True. ADC G Digital Output Complement, ADC G Digital Output True. ADC F Digital Output Complement, ADC F Digital Output True. ADC E Digital Output Complement, ADC E Digital Output True. Data Clock Digital Output Complement, Data Clock Digital Output True. Frame Clock Digital Output Complement, Frame Clock Digital Output True. ADC D Digital Output Complement, ADC D Digital Output True. ADC C Digital Output Complement, ADC C Digital Output True. ADC B Digital Output Complement, ADC B Digital Output True. ADC A Digital Output Complement, ADC A Digital Output True. Serial Clock (SCLK)/Digital Test Pattern (DTP). Serial Data Input/Output (SDIO)/Data Format Select (DFS). Chip Select Bar. Power-Down. ADC A Analog Input True, ADC A Analog Input Complement. ADC B Analog Input Complement, ADC B Analog Input True. ADC C Analog Input True, ADC C Analog Input Complement. Rev. A | Page 10 of 13 Data Sheet Pin No. 52, 53 54 55 56 57 58 60, 61 63, 64 AD9257-EP Mnemonic VIN- D, VIN+ D RBIAS SENSE VREF VCM SYNC VIN+ E, VIN- E VIN- F, VIN+ F Description ADC D Analog Input Complement, ADC D Analog Input True. Analog Current Bias Setting. Connect to 10 k (1% tolerance) resistor to ground. Reference Mode Selection. Voltage Reference Input/Output. Analog Output Voltage at Midsupply. This pin sets the common mode of the analog inputs. Digital Input. SYNC input to clock divider. 30 k internal pull-down resistor. ADC E Analog Input True, ADC E Analog Input Complement. ADC F Analog Input Complement, ADC F Analog Input True. Rev. A | Page 11 of 13 AD9257-EP Data Sheet TYPICAL PERFORMANCE CHARACTERISTICS See the AD9257 data sheet for a full set of Typical Performance Characteristics plots. 105 SNR/SFDR (dBFS/dBc) 100 SFDR (dBc) 95 90 85 80 SNR (dBFS) 70 -55 -35 -15 5 25 45 65 TEMPERATURE (C) 85 105 125 12740-015 75 Figure 7. SNR/SFDR vs. Temperature, fIN = 9.7 MHz, fSAMPLE = 65 MSPS Rev. A | Page 12 of 13 Data Sheet AD9257-EP OUTLINE DIMENSIONS 9.10 9.00 SQ 8.90 0.30 0.25 0.18 PIN 1 INDICATOR 49 PIN 1 INDICATOR 64 1 48 0.50 BSC EXPOSED PAD 6.30 6.20 SQ 6.10 33 16 PKG-004559 0.80 0.75 0.70 0.45 0.40 0.35 32 17 BOTTOM VIEW 0.05 MAX 0.02 NOM COPLANARITY 0.08 0.203 REF SEATING PLANE 0.20 MIN 7.50 REF FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. COMPLIANT TO JEDEC STANDARDS MO-220-WMMD 06-06-2014-A TOP VIEW Figure 8. 64-Lead Lead Frame Chip Scale Package [LFCSP_WQ] 9 mm x 9 mm Body, Very Very Thin Quad (CP-64-17) Dimensions shown in millimeters ORDERING GUIDE Model1 AD9257TCPZ-65-EP 1 Temperature Range -55C to +125C Package Description 64-Lead Lead Frame Chip Scale Package [LFCSP_WQ] Z = RoHS Compliant Part. (c)2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D12740-0-6/15(A) Rev. A | Page 13 of 13 Package Option CP-64-17