Fiel d Program m able Osci llator
Description
SiTime offers a wide range of field programmable (FP)
MEMS oscillators including simple oscillators, differential
oscillators, high temperature oscillators, VCXO and
spread spectrum oscillators. These FP devices support
the same specifications and performance as their factory-
programmed counterparts.
They enable engineers to experiment with different
configurations and generate customized samples in
seconds for fast prototyping.
Figure 1 illustrates the simple programming setup
required for programming SiTime FP devices by using
the SiT6100DK, a field programming kit. Refer to
SiT6100DK quick start guide and other documents for
more information.
For production volume, SiTime offers factory
programming of its entire portfolio with the shortest lead
time available in the industry .
Applications
Generic samples in seconds for prototype builds
Experiment with different options for optimal
timing margin
Configure different drive strengths for best EMI and/or
to drive larger loads
Fast prototyp e build s
Features
Support for 8 MEMS oscillator families
Low power (SiT1602, SiT8008, SiT8009)
Ultra-performance (SiT8208, SiT8209)
Ultra-performance differential (SiT9120, SiT9121, SiT9122)
High temp (SiT1618, SiT8918, SiT8919, SiT8920,
SiT8921)
AEC-Q100 Automotive (SiT2024, SiT2025, SiT8924,
SiT8925)
Clock Generators (SiT2001, SiT2002, SiT2018,
SiT2019, SiT2020, SiT2021)
VCXO (SiT3807, SiT3808, SiT3809)
Differential VCXO (SiT3821, SiT3822)
Spread spectru m (SiT9005, SiT9003)
Differential spread sp ectrum (SiT9002)
Wide variety of programmable options
Frequency from 1 625 MHz
Frequency stability from ±20 to ±50 ppm
Supply voltages of 1.8V or 2.5 to 3.3V
Operating temperature up to 125 °C and down to -55°C
Package sizes for 2.0 x 1.6 to 7.0 x 5.0 mm x mm
Pull ranges from ±25 to ±1600 ppm (VCXO only)
Spread percenta ge fr om ±0.25% to ±2% or
-0.5% to -4% (Spread spectrum only)
Rise/fall time from 0.25 ns to 40 ns
Pb-free, RoHS and REACH compliant
Figure 1. Field Programmable Software and Hardware
Rev 1.5
February 1, 2018
www.sitime.com
Field Programmable Oscillator
Rev 1.5
Page 2 of 11
www.sitime.com
Field Programmable Device
Ordering Information
A FP device works as a superset of its programmed
counterpart. In certain cases, it can also be mapped to
different programmed base products.
As an example, SiT8008BI-71-XXX-000.FP0000 is a field
programmable device in the low power family. It comes in the
2.0 x 1.6 mm package, and can be programmed to support
different com bin atio ns of the following:
Frequency: 1 MHz to 110 MHz with 6 decimal places
of accuracy
Frequency stability: ±20 ppm, ±25 ppm, ±50 ppm
Temperature range: -20°C to 70°C, -40°C to 85°C
Supply voltages: 1.8V or 2.5V to 3.3V
Output drive strength: 8 different options for different
rise/fall time
In ad diti on, the SiT8008BI-11--XXX-000.FP0000 can be
used for either SiT1602 or SiT8008 in the
2.0 x 1.6 mm x mm package. The SiT1602 and the
SiT8008 share similar electrical specs and the same
field programmable devices, but they support different
frequencies.
Please see Supported Device column to figure out
which product families can be programmed using the
given FP part.
Contact SiTime for devices of your interest that are not
covered here.
Table 1. Field Programmable Devices - MEMS XO[1]
Oscillator
Product
Family
Field Programmable (FP)
Part Number Supported
Devices Signaling
Type
Frequency
Range
(MHz)
Frequency
Stability
(ppm)
Temp
Range
(°C)
Voltage
(V) Package
Size
(mm x mm)
Low Power
Single-Ended
Oscillator
SiT8008BI-71-XXX-000.FP0000
SiT1602,
SiT8008 LVCMOS 1 to 110 ±20, ±25, ±50 -40 to 85,
-20 to 70 1.8V,
2.5-3.3V
2.0 x 1.6
SiT8008BI-11-XXX-000.FP0000
2.5 x 2.0
SiT8008BI-21-XXX-000.FP0000
3.2 x 2.5
SiT8008BI-31-XXX-000.FP0000
5.0 x 3.2
SiT8008BI-81-XXX-000.FP0000
7.0 x 5.0
SiT8009BI-71-XXX-000.FP0000
SiT8009 LVCMOS 115 to 137 ±20, ±25, ±50 -40 to 85,
-20 to 70 1.8V,
2.5-3.3V
2.0 x 1.6
SiT8009BI-11-XXX-000.FP0000 2.5 x 2.0
SiT8009BI-21-XXX-000.FP0000
3.2 x 2.5
SiT8009BI-31-XXX-000.FP0000
5.0 x 3.2
SiT8009BI-81-XXX-000.FP0000 7.0 x 5.0
Ultra-
Performance
Single-Ended
Oscillator
SiT8208AI-G1-XXX-000.FP0000
SiT8208 LVCMOS 1 to 80 ±20, ±25, ±50 -40 to 85,
-20 to 70 1.8V,
2.5-3.3V
3.2 x 2.5
SiT8208AI-21-XXX-000.FP0000
5.0 x 3.2
SiT8208AI-31-XXX-000.FP0000
7.0 x 5.0
SiT8209AI-G1-XXX-000.FP0000
SiT8209 LVCMOS 80 to 220 ±20, ±25, ±50 -40 to 85,
-20 to 70 1.8V,
2.5-3.3V
3.2 x 2.5
SiT8209AI-21-XXX-000.FP0000
5.0 x 3.2
SiT8209AI-31-XXX-000.FP0000
7.0 x 5.0
High
Performance
Differential
Oscillator
SiT9121AI-1B1-XXX000.FP0000
SiT9120,
SiT9121
LVPECL 1 to 220 ±20, ±25, ±50 -40 to 85,
-20 to 70 2.5V,
3.3V
3.2 x 2.5
SiT9121AI-1C1-XXX000.FP0000
5.0 x 3.2
SiT9121AI-1D1-XXX000.FP0000
7.0 x 5.0
SiT9121AI-2B1-XXX000.FP0000
LVDS 1 to 220 ±20, ±25, ±50 -40 to 85,
-20 to 70 2.5V,
3.3V
3.2 x 2.5
SiT9121AI-2C1-XXX000.FP0000
5.0 x 3.2
SiT9121AI-2D1-XXX000.FP0000
7.0 x 5.0
SiT9122AI-1B1-XXX000.FP0000
SiT9122
LVPECL 220 to 625 ±20, ±25, ±50 -40 to 85,
-20 to 70 2.5V,
3.3V
3.2 x 2.5
SiT9122AI-1C1-XXX000.FP0000 5. 0 x 3.2
SiT9122AI-1D1-XXX000.FP0000
7.0 x 5.0
SiT9122AI-2B1-XXX000.FP0000
LVDS 220 to 625 ±20, ±25, ±50 -40 to 85,
-20 to 70 2.5V,
3.3V
3.2 x 2.5
SiT9122AI-2C1-XXX000.FP0000 5. 0 x 3.2
SiT9122AI-2D1-XXX000.FP0000
7.0 x 5.0
Field Programmable Oscillator
Rev 1.5
Page 3 of 11
www.sitime.com
Table 1. Fiel d Progr amm able Dev ices - MEMS XO[1] (continued)
Oscillator
Product
Family
Field Programmable (FP)
Part Number Supported
Devices Signaling
Type
Frequency
Range
(MHz)
Frequency
Stability
(ppm)
Temp
Range
(°C)
Voltage
(V)
Package
Size
(mm x mm)
High
Temperature
Single-Ended
Oscillator
SiT8920BM-71-XXX-000.FP0000
SiT1618,
SiT8918,
SiT8920 LVCMOS
1 to 110
Refer “Supported
Frequencies
tables in SiT1618,
SiT8918 and
SiT8920
datasheets
±20, ±25,
±30, ±50
-40 to 105,
-40 to 125,
-55 to 125
1.8V,
2.5-3.3V
2.0 x 1.6
SiT8920BM-11-XXX-000.FP0000
2.5 x 2.0
3.2 x 2.5
SiT8920BM-31-XXX-000.FP0000
5.0 x 3.2
7.0 x 5.0
SiT8921BM-71-XXX-000.FP0000
SiT8919,
SiT8921 LVCMOS
115.194001 to 137
Refer “Supported
Frequencies
tables in SiT8919
and SiT8921
datasheets
±20, ±25,
±30, ±50
-40 to 105,
-40 to 125,
-55 to 125
1.8V,
2.5-3.3V
2.0 x 1.6
2.5 x 2.0
3.2 x 2.5
SiT8921BM-31-XXX-000.FP0000
5.0 x 3.2
7.0 x 5.0
AEC-Q100
Automotive
Oscillator
SiT2024BM-S1-XXX-000.FP0000 SiT2024 LVCMOS
1 to 110
Refer “Supported
Frequencies
table in SiT2024
datasheet
±20, ±25,
±30, ±50
-40 to 85,
-40 to 105,
-40 to 125,
-55 to 125
1.8V,
2.5-3.3V 2.9 x 2.8
(SOT23-5)
SiT2025BM-S1-XXX-000.FP0000 SiT2025 LVCMOS
115.2 to 137
Refer “Supported
Frequencies
table in SiT2025
datasheet
±20, ±25,
±30, ±50
-40 to 85,
-40 to 105,
-40 to 125,
-55 to 125
1.8V,
2.5-3.3V 2.9 x 2.8
(SOT23-5)
SiT8924BM-71-XXX-000.FP0000
SiT8924 LVCMOS
1 to 110
Refer “Supported
Frequencies
table in SiT8924
datasheet
±20, ±25,
±30, ±50
-40 to 85,
-40 to 105,
-40 to 125,
-55 to 125
1.8V,
2.5-3.3V
2.0 x 1.6
2.5 x 2.0
SiT8924BM-21-XXX-000.FP0000 3. 2 x 2.5
SiT8924BM-31-XXX-000.FP0000
5.0 x 3.2
7.0 x 5.0
SiT8925BM-71-XXX-000.FP0000
SiT8925
LVCMOS
115.2 to 137
Refer “Supported
Frequencies
table in SiT8925
datasheet
±20, ±25,
±30, ±50
-40 to 85,
-40 to 105,
-40 to 125,
-55 to 125
1.8V,
2.5-3.3V
2.0 x 1.6
2.5 x 2.0
SiT8925BM-21-XXX-000.FP0000 3. 2 x 2.5
SiT8925BM-31-XXX-000.FP0000
5.0 x 3.2
7.0 x 5.0
Clock
Generator
Oscillator
SiT2001BI-S1-XXX-000.FP0000 SiT2001 LVCMOS 1 to 110
±20, ±25,
±50
-40 to 85,
-20 to 70
1.8V,
2.5-3.3V
2.9 x 2.8
(SOT23-5)
SiT2002BI-S1-XXX-000.FP0000 SiT2002 LVCMOS 115 to 137
±20, ±25,
±50
-40 to 85,
-20 to 70
1.8V,
2.5-3.3V
2.9 x 2.8
(SOT23-5)
SiT2020BM-S1-XXX-000.FP0000 SiT2018,
SiT2020 LVCMOS
1 to 110
Refer “Supported
Frequencies
tables in SiT2018
and SiT2020
datasheets
±20, ±25,
±30, ±50
-40 to 105,
-40 to 125,
-55 to 125
1.8V,
2.5-3.3V 2.9 x 2.8
(SOT23-5)
SiT2021BM-S1-XXX-000.FP0000 SiT2019,
SiT2021 LVCMOS
115.194001 to 137
Refer “Supported
Frequencies
tables in SiT2019
and SiT2021
datasheets
±20, ±25,
±30, ±50
-40 to 105,
-40 to 125,
-55 to 125
1.8V,
2.5-3.3V 2.9 x 2.8
(SOT23-5)
Note:
1. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be
programed to SiT8008B .
Field Programmable Oscillator
Rev 1.5
Page 4 of 11
www.sitime.com
Table 2. Field Progra mmabl e Dev ices - MEMS VCXO[2]
Oscillator
Product
Family
Field Programmable (FP)
Part Number Supported
Devices Signaling
Type
Frequency
Range
(MHz)
Frequency
Stability
(ppm)
Temp
Range
(°C)
Voltage
(V)
Pull
Range
(ppm)
Package
Size
(mm x mm)
High
Performance
Single-Ended
VCXO
SiT3808AI-G2-XXXX-000.FP0000
SiT3807,
SiT3808 LVCMOS 1 to 80 ±25, ±50 -40 to 85,
-20 to 70 1.8V,
2.5-3.3V ±25 to
±1600
3.2 x 2.5
SiT3808AI-22-XXXX-000.FP0000 5.0 x 3.2
SiT3808AI-32-XXXX-000.FP0000 7.0 x 5.0
SiT3809AI-G2-XXXX-000.FP0000
SiT3809 LVCMOS 80 to 220 ±25, ±50 -40 to 85,
-20 to 70 1.8V,
2.5-3.3V ±25 to
±1600
3.2 x 2.5
SiT3809AI-22-XXXX-000.FP0000 5.0 x 3.2
SiT3809AI-32-XXXX-000.FP0000 7.0 x 5.0
High
Performance
Differential
VCXO
SiT3821AI-1C2-XXXX000.FP0000
SiT3821
LVPECL 1 to 220 ±25, ±50 -40 to 85,
-20 to 70 2.5V, 3.3V ±25 to
±1600
5.0 x 3.2
SiT3821AI-1D2-XXXX000.FP0000
7.0 x 5.0
SiT3821AI-2C2-XXXX000.FP0000
LVDS 1 to 220 ±25, ±50 -40 to 85,
-20 to 70 2.5V, 3.3V ±25 to
±1600
5.0 x 3.2
SiT3821AI-2D2-XXXX000.FP0000
7.0 x 5.0
SiT3822AI-1C2-XXXX000.FP0000
SiT3822
LVPECL 220 to 625 ±25, ±50 -40 to 85,
-20 to 70 2.5V, 3.3V ±25 to
±1600
5.0 x 3.2
SiT3822AI-1D2-XXXX000.FP0000
7.0 x 5.0
SiT3822AI-2C2-XXXX000.FP0000
LVDS 220 to 625 ±25, ±50 -40 to 85,
-20 to 70 2.5V, 3.3V ±25 to
±1600
5.0 x 3.2
SiT3822AI-2D2-XXXX000.FP0000
7.0 x 5.0
Note:
2. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be programed to
SiT8008B.
Field Programmable Oscillator
Rev 1.5
Page 5 of 11
www.sitime.com
Table 3. Field Progra mmabl e Dev ices - ME MS Spread Spec trum XO[3]
Oscillator
Product
Family
Field Programmable (FP)
Part Number Supported
Devices Signaling
Type
Frequency
Range
(MHz)
Frequency
Stability
(ppm)
Temp
Range
(°C)
Voltage
(V)
Spread
Range
(%)
Package
Size
(mm x mm)
Spread
Spectrum
Single-
Ended
Oscillator
SiT9005AI-71-XXXX000.FP0000
SiT9005 LVCMOS
1 to 141
Refer to Table 4:
SiT9005 FP
Oscillator
unsupported
frequencies
±20, ±25,
±50 -40 to 85,
-20 to 70 1.8V,
2.5-3.3V ±0.125 to ±2,
-0.25 to -4
2.0 x 1.6
SiT9005AI-11-XXXX000.FP0000 2.5 x 2.0
SiT9005AI-21-XXXX000.FP0000 3.2 x 2.5
Spread
Spectrum
Single-
Ended
Oscillator
SiT9003AI-33-33XX-000.FP000
SiT9003 LVCMOS 1 to 110 ±50, ±100 -40 to 85,
-20 to 70
2.5V,
2.8V,
3.3V ±0.25 to ±0.5,
-0.5 to -1
5.0 x 3.2
SiT9003AI-83-33XX-000.FP000 7.0 x 5.0
SiT9003AI-33-18XX-000.FP000 1.8V 5.0 x 3.2
SiT9003AI-83-18XX-000.FP000 7.0 x 5.0
Spread
Spectrum
Differential
Oscillator
SiT9002AI-X32XXXXX000.FP000
SiT9002
LVPECL,
LVDS,
HCSL,
CML
1 to 220
Refer to Table 5 :
SiT9002 FP
Oscillator
unsupported
frequencies
-20 to 70:
±25, ±50
-40 to 85:
±50
-40 to 85,
-20 to 70
1.8V,
2.5V,
3.3V
±0.25 to ±2,
-0.5 to -4
5.0 x 3.2
SiT9002AI-X82XXXXX000.FP000 7.0 x 5.0
Note:
3. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be
programed to SiT8008B .
Table 4. List of SiT 90 05 F P Oscillator U nsu pp or t ed Frequencies
SiT9005 FP Oscillator Unsupported Frequency Range (MHz)
±2.06% center spread -4.01% down spread -4.28% center spread
Min. Max. Min. Max. Min. Max.
120.100000
121.100000
121.000000
121.300000 120.100000 122.300000
122.900000 123.100000
123.500000 124.000000
124.9000000 125.200000
Field Programmable Oscillator
Rev 1.5
Page 6 of 11
www.sitime.com
Table 5. List of SiT9002 F P Oscill at or Unsupp orted Freque nci es
SiT9002 FP Oscillator Unsupported Frequency Range (MHz)
±0.25% center spread
±0.5% ce nter spread
±1.0% center spread
±2.0% center spread
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
1.04200 1.07000 1.04000 1.07400 1.03600 1.07800 1.02600 1.09000
1.19200 1.22400 1.19000 1.22600 1.18400 1.23400 1.17200 1.24600
1.39000 1.42800 1.38800 1.43200 1.38000 1.43800 1.36800 1.45400
2.08600 2.14200 2.08200 2.14600 1.65600 1.66600 1.64000 1.68200
4.17000 4.28000 2.84200 2.84600 2.07000 2.15800 1.86800 1.87000
8.35000 8.57000 2.85000 2.86200 2.83000 2.87800 2.05000 2.17800
16.69000 17.13000 4.16000 4.29000 4.14000 4.31000 2.46200 2.49000
33.40000 34.25000 5.70000 5.73000 5.66000 5.75000 2.80200 2.90600
66.81000 68.51000 8.33000 8.59000 8.28000 8.63000 4.10000 4.36000
133.61000 137.11000 11.37000 11.45000 11.31000 11.51000 4.92000 4.98000
160.31000 164.61000 16.65000 17.19000 16.57000 17.27000 5.60000 5.81000
200.41000 205.71000 22.85000 22.90000 22.65000 23.00000 7.47000 7.48000
33.30000 34.35000 33.15000 34.55000 8.20000 8.72000
45.50000 45.55000 45.30000 46.05000 9.85000 9.97000
45.60000 45.65000 66.31000 69.11000 11.21000 11.63000
45.70000 45.80000 90.51000 92.11000 16.41000 17.45000
66.61000 68.71000 132.61000 138.21000 19.69000 19.93000
91.01000 91.11000 159.11000 165.81000 32.80000 34.90000
91.21000 91.31000 181.21000 186.61000 39.40000 39.85000
91.41000 91.61000 198.91000 207.31000 44.85000 46.50000
133.21000 137.51000 65.61000 69.81000
159.91000 165.01000 78.71000 79.71000
182.11000 182.21000
89.71000 93.01000
182.41000 182.71000 131.31000 139.61000
182.81000 183.71000 157.61000 167.51000
184.01000 184.21000 179.41000 188.51000
185.11000 185.21000
197.01000 209.41000
199.91000 206.21000
Field Programmable Oscillator
Rev 1.5
Page 7 of 11
www.sitime.com
Table 5. List of SiT 90 02 F P Oscillator U nsu pp or t ed Frequencies (continued)
SiT9002 FP Oscillator Unsupported Frequency Range (MHz)
-0.5% down spread
-1.0% down spread
-2.0% down spread
-4.0% down spread
Min.
Max.
Min.
Max.
Min.
Max.
Min.
Max.
1.04461 1.07268 1.04520 1.07937 1.04636 1.08878 1.04652 1.11180
1.19498 1.22706 1.19595 1.23213 1.19584 1.24634 1.19544 1.27092
1.39348 1.43157 1.39494 1.43916 1.39380 1.45238 1.39536 1.48308
2.09122 2.14736 2.09241 2.15673 1.67256 1.68266 1.67280 1.71564
4.18043 4.29070 2.85621 2.86023 2.09070 2.17958 1.90536 1.90740
8.37088 8.59143 2.86425 2.87631 2.85830 2.90678 2.09100 2.22156
16.73173 17.17283 4.18080 4.31145 4.18140 4.35310 2.51124 2.53980
33.48350 34.33563 5.72850 5.75865 5.71660 5.80750 2.85804 2.96412
66.97703 68.68128 8.37165 8.63295 8.36280 8.71630 4.18200 4.44720
133.94403 137.45278 11.42685 11.50725 11.42310 11.62510 5.01840 5.07960
160.71078 165.02153 16.73325 17.27595 16.73570 17.44270 5.71200 5.92620
200.91103 206.22428 22.96425 23.01450 22.87650 23.23000 7.61940 7.62960
33.46650 34.52175 33.48150 34.89550 8.36400 8.89440
45.72750 45.77775 45.75300 46.51050 10.04700 10.16940
45.82800 45.87825 66.97310 69.80110 11.43420 11.86260
45.92850 46.02900 91.41510 93.03110 16.73820 17.79900
66.94305 69.05355 133.93610 139.59210 20.08380 20.32860
91.46505 91.56555 160.70110 167.46810 33.45600 35.59800
91.66605 91.76655 183.02210 188.47610 40.18800 40.64700
91.86705 92.06805 200.89910 209.38310 45.74700 47.43000
133.87605 138.19755 66.92220 71.20620
160.70955 165.83505 80.28420 81.30420
183.02055 183.12105
91.50420 94.87020
183.32205 183.62355 133.93620 142.40220
183.72405 184.62855 160.76220 170.86020
184.93005 185.13105 182.99820 192.28020
186.03555 186.13605
200.95020 213.59820
200.90955 207.24105
Field Programmable Oscillator
Rev 1.5
Page 8 of 11
www.sitime.com
Tape & Reel Options
FP devices are shipped with standard Tape & Reel options.
An additional letter is affixed to the end of the FP device
part numbers in Tables 6 to 8 to specify the tape size and
the reel quantity.
For example, the last letter “Gin the SiT8008AI-71-XXX-
000.FP0000G indicates 250 pieces of SiT8008AI FP devices
shipped in 8 mm tape.
The complete list of T&R options for different device package
sizes are shown in tables below.
Table 6. O rdering Codes for Support ed Tape & Reel Packing Method
Supported FP Device: SiT8008, SiT8009, SiT8920, SiT8921, SiT8924, SiT8925,
SiT9005
Tape & Reel
8 mm Tape
12 mm Tape
16 mm Tape
Package Size (mm x mm) 250 pcs reel 1ku reel 250 pcs reel 1ku reel 250 pcs reel 1ku reel
2.0 x 1.6 G E
2.5 x 2.0
G
E
3.2 x 2.5 G E
5.0 x 3.2 X Y
7.0 x 5.0 X Y
Table 7. O rdering Codes for Support ed Tape & Reel Packing Method
Supported FP Device: SiT3808, SiT3809, SiT3821, SiT3822, SiT8208, SiT8209,
SiT9002, SiT9003, SiT9121, SiT9122
Tape & Reel 12 mm Tape 16 mm Tape
Package Size (mm x mm)
250 pcs reel
1ku reel
250 pcs reel
1ku reel
2.5 x 2.0 X Y
3.2 x 2.5 X Y
5.0 x 3.2
X
Y
7.0 x 5.0 X Y
Table 8. O rdering Codes for Support ed Tape & Reel Packing Method
Supported FP Device: SiT2024, SiT2025, SiT9201, SiT2001, SiT2002, SiT2020, SiT2021
Tape & Reel 8mm Tape
Package Size (mm x mm) 250 pcs reel 1ku reel
2.9 x 2.8 G E
Field Programmable Oscillator
Rev 1.5
Page 9 of 11
www.sitime.com
Time Machine II Programmer Kit
FP devices are programmed with SiTime’s oscillator
programmer. Time Machine II is a complete programming kit.
It comes with the programmer base unit and three socket
cards, each of which accommodates two different oscillator
package sizes. The ordering codes for the programming kit
and the socket cards are shown in the table below.
Note that earlier versions of the programming kit was
shipped with the SiT6162DK socket card that
accommodates 2.7 x 2.4 mm x mm (2.5 x 2.0
compatible) and 3.2 x 2.5 mm x mm 4-pin packages.
The SiT6162DK has since been replaced with
SiT6165DK, which supports the 2.9 x 2.8 mm x mm
(SOT23-5) packages in addition to 3.2 x 2.5 mm x mm
packages.
Table 9. Pr ogr am me r K i t Descrip t i on an d O rdering Codes
Device Name
Part Number
Description
Programming Kit SiT6100DK The complete kit that includes the programmer base (SiT61650DK) and three socket cards
(SiT6160DK, SiT6161 and SiT6165).
Programmer Base SiT6150DK The base prog ram m er wi th no sockets.
Programming Socket SiT6160DK 5.0x3.2 and 7.0x5.0 packages programming sockets to program all 6-in and 4-pin field programmable devices.
Programming Socket SiT6161DK 2.0x1.6 and 2.5x2.0 packages programming sockets to program all 6-in and 4-pin field programmable devices.
Programming Socket SiT6165DK 3.2x2.5 package programming sockets to program all 6-in and 4-pin field programmable devices. 2.9x2.8 (SOT23-5)
package supports 5-pin field programmable devices
Field Programmable Oscillator
Rev 1.5
Page 10 of 11
www.sitime.com
Socket Card Selection for Programming
Each socket card for the Time Machine II programmer
comes with two sockets, each of which accommodates a
particular package size. In addition, some sockets are
designed to work with 4-pin devices only whereas other
sockets can accommodate both 4-pin and 6-pin devices.
Table below shows how to select the proper socket card for
the desired FP device package size. Note that the package
sizes are also printed right next to the sockets on the socket
cards for visual identification during device programming.
Table 10. Supported Packages
Package Size 2.0 x 1.6
(4-pin)
2.5 x 2.0
(4-pin)
2.9 x 2.8
(5-pin)
3.2 x 2.5
(4-pin & 6-pin)
5.0 x 3.2
(4-pin & 6-pin)
7.0 x 5.0
(4-pin & 6-pin)
Socket to use
SiT6161DK
SiT6165DK
SiT6160DK
Supported
SiT8008
SiT8008
SiT2024
SiT8008
SiT8008
SiT8008
Field
SiT8009
SiT8009
SiT2025
SiT8009
SiT8009
SiT8009
Programmable
SiT8920
SiT8920
SiT9201
SiT8208
SiT8208
SiT8208
Devices
SiT8921
SiT8921
SiT2001
SiT8209
SiT8209
SiT8209
SiT8924
SiT8924
SiT2002
SiT8920
SiT8920
SiT8920
SiT8925
SiT8925
SiT2020
SiT8921
SiT8921
SiT8921
SiT9005
SiT9003
SiT2021
SiT8924
SiT8924
SiT8924
SiT9005
SiT8925
SiT8925
SiT8925
SiT3808
SiT3808
SiT3808
SiT3809
SiT3809
SiT3809
SiT9121
SiT9121
SiT9121
SiT9122
SiT9122
SiT9122
SiT9003
SiT3821
SiT3821
SiT9005
SiT3822
SiT3822
SiT9002
SiT9002
SiT9003
SiT9003
Sili c on MEM S Outper f orms Quartz
Rev 1.5
Page 11 of 11
www.sitime.com
Table 11. Revisi on History
Revision
Release Date
Change Summary
0.8
04/01/2013
First release
1.0 02/27/2014
Added more field programmer devices
Updated Time Machine Socket Card information
Formatte d enh ancemen t
1.01
03/12/2014
Corrected the ordering code for High Temperature, Single-Ended devic es
1.1 03/30/2015 Updated revision from A to B for SiT8008/8009/8920/8921
Corrected frequency stability of SiT9002
1.2 07/21/2015
Added supports for AEC-Q100 automotive products;SiT2024, SiT2025, SiT8924,SiT8925
Added supports for clock generators products;SiT9201, 2001, 2002, SiT2018, SiT2019, SiT2020, SiT2021
Corrected frequency range and frequency stability of the high temperature products (SiT8920/SiT8921) in Table.1
Updated the part number of the program kits in Table.6
1.3 09/15/2015 Added ±25 ppm frequency stability option to AEC-Q100 family
Revised spread percentage of SiT9001
Added 2.8 V voltage option to SiT9003
1.4
03/14/2016
Corrected and added one more 0” at the end of all part numbers except for SiT900x
1.5 02/01/2018
Added SiT9005
Added SiT9002 unsupported frequencies list
Took out 2520 and 3225 package options from SiT9003
Took out 2520 package option from SiT8208, SiT8209, SiT3807 and SiT3808
Took out SiT9001
Updated logo and company address, other page layout changes
SiTi m e Corporation, 5451 Patri ck Henry Drive, Santa Clar a, CA 95054, USA | Phone: +1-408-328-4400 | Fax: +1-408-328-4439
© SiTime Corporation
2013-2018. The information contained herein is subject to change at any time without notice. SiTime assumes
no responsibility or liability for any loss, damage
or defect
of a Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime produc
t, (ii) misuse or abuse including static discharge, neglect
or accide
nt, (iii) unauthorized modification or repairs which have been soldered or alte
red during assembly and are not capable of being tested by SiTime under its normal test conditions, or
(iv) improper installation, storage, handling, warehousing or transportat
ion, or (v) being subjected to unusual physical, thermal, or electrical stress.
Disclaimer:
SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, eithe
r in fact or by
operation
of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing
or
usage
of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any SiTime product and any product documentation. Products sold
by
SiTime
are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be
involved
or
at stake. All sales are made conditioned upon compliance with the critical uses policy set forth below.
CRITICAL USE EXCLUSION POLICY
BUYER AGREES NOT TO USE
SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR
FACILITIES
OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE.
SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software,
firmware, copyright, patent, or trademark. The sale of SiTime products
does
not
convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to
the sale
of
products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be
strictly
prohibited.