COMPUTING Centellis 2100 (R) AdvancedTCA(R) Platform Core Data Sheet Flexible configurations and power options make the Centellis 2100 the ideal choice for both central office and data center applications Two-slot, 3U, 19" form factor (horizontal slots) Targeted for central office and data center environments Up to 400 W per slot power and cooling NEBS compliant front-to-rear enhanced cooling Integrated shelf management and Base switching infrastructure Direct cross-connect circuitry for the Fabric Interface (1G/10G/40G) AC and DC power configurations available The Artesyn Embedded Technologies Centellis(R) 2100 platform core is a high availability platform ideally suited for data intensive, central office and enterprise networking applications. The low profile makes the Centellis 2100 the optimal candidate for distributed networking functions, low density subscriber areas, or specialized applications. Target applications include security and DPI applicances, distributed control plane functions, IMS/IPTV subsystems, 4G wireless applications, and edge networking and routing. With power and cooling support for up to 400 W per slot and up to 500 W in a single slot configuration, the new Centellis 2100 enables systems integrators to increase performance and I/O bandwidth per slot, while preparing for future performance upgrades that will have increasing power and cooling requirements. Designed to meet NEBS and ETSI environmental requirements, the Centellis 2100 features front-to-rear cooling, and is designed to meet and exceed the stringent Communications Platform Trade Association (CP-TA) B.4 thermal profile. Benefits Bladed architecture for scalability, minimized cabling and ease of maintenance Compact platform with integrated chassis, cooling, power, switching, and shelf management Strong ecosystem of off-the-shelf or custom blades allows the platform to be easily configured for a range of applications & upgraded as new technologies become available Power & cooling up to 400 Watts per blade slot accommodates today's technology with headroom for higher powered processors in the future SDN & NFV-ready ensuring seamless integration with evolving telecom networks Rich Content Ecosystem Two user slots for OEM customization Advanced packet classification software RoHS 6/6 compliant High throughput packet processing blades based on Cavium Octeon or Intel(R) Architecture processors Designed for NEBS/ETSI compliance (DC variants only) Intel(R) Xeon(R) based server blades with storage options Centellis(R) 2100 Data Sheet Block Diagram with Two ATCA Blades FRU Entity External Base Management Local Interface (1G) Ethernet Console Processing Unit Local Management External Base Console Ethernet Interface (1G) Chassis MF106 Module RTM ATCA Blade CPU Faceplate Cables Base Interface ShMM ShMM Base Switch Switch Base Switch Switch Base Interface I/O Fabric Interface Fabric Interface MF106 Module ATCA Blade Base Interface CPU Base Interface Fabric Channel Cross-connect I/O Fabric Interface Fabric Interface Fabric Extension User Card User Card I/O I/O Faceplate Cables RTM e.g. 10GBaseCX Faceplate Cables Faceplate Cables Centellis(R) 2100 Data Sheet Shelf Overview ENCLOSURE Two (2) slots for 8U AdvancedTCA blades Two (2) slots for 8U RTMs Two (2) user card slots for custom modules 40G backplane Front-to-rear cooling architecture ESD and earth ground points ENCLOSURE DIMENSIONS Height - 132 mm BACKPLANE Zone 1 * Redundant, bussed IPMI to all blade slots * Redundant, bussed -48 VDC to all blade slots Zone 2 * Dual star configuration for the base interface * Direct cross-connect routing for fabric connectivity * Fabric Channel 2 of AdvancedTCA Slot 1 is routed to User Card 1 * Fabric Channel 1 of AdvancedTCA Slot 2 is routed to User Card 2 * Update channel routing between both slots * Three redundant telecom bussed clock signals to all hub/node slots Width - 445 mm Depth - 420 mm Zone 3 PICMG(R) 3.0 defined open area, application specific Note: Dimension figures do not include mounting ears and cable trays unless specifically noted Note: Fabric interface configurations support 1G, 10G and 40G operation PRODUCT WEIGHT SHELF MANAGEMENT CENT-2100-DC2: 14.20 lbs 1+1 redundancy architecture CENT-2100-AC2: 14.28 lbs. Two (2) shelf management slots OPERATING ENVIRONMENT Integrated Base switch infrastructure Operating temperature range (DC): -5 C to 55 C @ 90% non-condensing humidity POWER DISTRIBUTION Operating temperature range (AC): -5 C to 40 C @ 90% non-condensing humidity CENT-2100-DC2: Two (2) power entry module (PEM) slots * 1+1 redundancy architecture Storage temperature range: -40 C to 70 C @ 95% relative humidity CENT-2100-AC2: Two (2) AC power supply (PSU) slots POWER REQUIREMENTS N+1 redundancy architecture CENT-2100-DC2 maximum: 986 Watts Front-to-back cooling architecture CENT-2100-AC2 maximum: 1120 Watts Single (1) front fan tray unit Note: Shelf power without payload Single (1) rear fan tray unit COOLING RELEVANT STANDARDS PICMG 3.0 (form factor, IPMI, base interface, hot swap, RTM) PICMG 3.1, Options 1 and 9 (1G, 10G operation) PICMG 3.1 R2 (40G operation) CP-TA B.4 Centellis(R) 2100 Data Sheet Shelf Layout REAR (TOP TO BOTTOM) Two (2) horizontal, 8U RTM slots FRONT (TOP TO BOTTOM) Two (2) user card slots Two (2) horizontal, 8U blade slots Two (2) shelf management module slots Alarm panel Two (2) AC input receptacles (AC option only) Two (2) slots for AC PSU or DC PEM Two (2) high current connectors for DC input (DC option only) Single (1) front fan tray module slot Artesyn or customer label Alarm display Single (1) rear fan tray module slot User card slot #1 ATCA front slot #2 PEM slot #1 PEM slot #2 ATCA front slot #1 Front fan tray air inlet Shelf manager slot #1 User card slot #2 AC or DC power inputs Shelf manager slot #1 RTM slot #1 RTM slot #2 Rear fan tray exhaust Shelf Management The purpose of shelf management, as defined by the PICMG 3.0 standard, is to assure proper operation of AdvancedTCA blades and other components within the shelf. The shelf management module continually monitors all low-level, hardware functionality (inventory, sensor, status data, etc.) and reports status to the system manager. It also provides control access to these attributes. Management access to this information is provided via local console and Ethernet interfaces as well as the Service AvailabilityTM Forum (SA Forum) defined HPI interface. Each blade and major shelf component has an Intelligent Platform Management Controller (IPMC) that is responsible for providing this information to the shelf management module. The Centellis 2100 provides redundant shelf management functionality utilizing an active/standby architecture. Visual indicators, as well as physical interfaces, are provided for direct front panel access. PROCESSOR PANEL ACCESS & INTERFACES Freescale MPC8306S @ 266 MHz One (1) 1.0G Base Interface port, RJ-45 MEMORY One (1) 10/100BaseT management Ethernet, RJ-45 128MB, DDR2 SDRAM The Base Interface switch functionality is integrated into the MF106 Shelf Management module. The switch infrastructure supports IEEE 802.3 1000BASE-T, 100BASE-TX, 10BASE-T connectivity to both AdvancedTCA slots as required by PICMG 3.0. One external 1000BASE-T Ethernet interface is available on the face plate for external connectivity. The Base Interface function is completely manageable; locally or remotely. One (1) Console port, RJ-45 128MB boot flash (64 + 64), dual-bank architecture SHELF MANAGER LED STATUS INDICATORS 128MB user storage In service (IS) Out of service (OOS) ACT (Activity Shelf Manager) Hot Swap (H/S) Centellis(R) 2100 Data Sheet Fan Tray Module Power Supply Unit (PSU) The Centellis 2100 utilizes a fault-tolerant, push-pull cooling architecture and is implemented using front and rear fan tray modules. The cooling system is designed to provide enhanced cooling performance for the most demanding, next generation packet processing based ATCA blades. An integrated shelf manager function monitors and controls the speed of each individual fan for optimal performance. Fan control decisions are made based on air intake temperature, air exhaust temperature and thermal data provided by the blades. In the event of communication failure between the shelf management entity and the fan tray modules, all fans automatically run at full speed to ensure maximum cooling until the failure is eliminated. Power conditioning for the AC variants of the Centellis 2000 shelf is provided by one or two AC PSUs. Standard AC receptacles are provided for simple installation; the PSU output provides DC power to the backplane on the redundant -48 VDC power rails for blades, RTMs and other shelf components. The actual power connection is located in the rear of the chassis and for safety reasons is a fixed, non-field replaceable unit. GENERAL CHARACTERISTICS EMI filtering Front-to-back cooling architecture Transient voltage suppression Front blade cooling capacity: 54 cubic feet per minute (CFM) LED Status indicators RTM cooling capacity: 12 CFM Status (red/green) GENERAL CHARACTERISTICS Input voltage range (100 - 240 VAC, 50/60 Hz @ 8.5 amps) Power infrastructure capable of supporting up to 375 Watts to each slot or 450W to a single slot and 300W to the other slot Automatic fan speed control Power Entry Module (PEM) Power conditioning for the DC variant of the Centellis 2100 shelf is provided by one or two PEMs. They provide power to the backplane on the redundant -48 VDC power rails for blades, RTMs and other shelf components. The actual power connection is located in the rear of the chassis and for safety reasons is a fixed, non-field replaceable unit. User Cards Two User Card slots are provided to allow customers the ability to integrate custom functions into the platform. Examples include Telecom clock generators, 10GB fabric uplinks, or telecom alarms. Each User Card is 110 mm deep x 70 mm wide x 20 mm high and accesses redundant power, IPMC, and clock connections and fabric channel connectivity. GENERAL CHARACTERISTICS GENERAL CHARACTERISTICS Two (2) slots for User Cards in the rear of chassis Input voltage range (-40 VDC to -72 VDC) Direct connection to backplane: 30 amp (max.), single-feed design Power infrastructure capable of supporting up to 400 Watts to each slot or 500W to a single slot and 300W to the other slot EMI filtering Transient voltage suppression LED STATUS INDICATORS Reverse (polarity detection) In (Input power available) Backplane (power available to the backplane) * Redundant -48 V power * Redundant intelligent peripheral management controllers (IPMC) * Redundant CLK1, CLK2 and CLK3 * One fabric channel to one ATCA blade (Four LVDS ports) Centellis(R) 2100 Data Sheet The Artesyn Experience Artesyn has over 30 years of experience serving the telecommunications industry and has hundreds of thousands of products deployed in the world's communications networks. With that long experience comes a deep understanding of our customers' requirements for on-time, consistent and high quality product coupled with excellent customer support. We deliver on all counts from our own world-class factory and seasoned support experts. Artesyn strives to speed our customers' time to revenue and make your development process as easy as possible. For example our System Services Framework software is designed to make the configuration of your system painless by automatically inventorying all the system hardware and software elements, allowing you to configure switches and payload boards as well as monitor and diagnose hardware and software behavior, all from a simple graphical user interface enabling access to a single shelf or multiple shelves locally or remotely. All these features and experiences are supported globally with local system architects and FAEs to keep you on schedule. We're very flexible and agile. We recognize that you may need your system to have your own unique branding. No problem. We're used to that. We have services that allow you to define the look and feel that's consistent with your company's branding and aesthetic standards. Our flexibility isn't just limited to look and feel. Integration services, unique support requirements, longevity of supply, drop shipments and many more services are designed to make it easy to do business with us and quick for you to get to market and deploy smoothly. Regulatory Compliance Item Description Designed to comply with NEBS (DC variants only) Telcordia GR-63-CORE, NEBS Physical Protection, Level 3 Designed to comply with ETSI ETSI Storage, ETS 300 019-2-1, Class 1.2 equipment, Weatherprotected, not Temperature Controlled Storage Locations Telcordia GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety -- Generic Criteria for Network Telecommunications Equipment. Level 3, Equipment Type 2 ETSI Transportation, ETS 300 019-1-2, Class 2.3 equipment, Public Transportation ETSI Operation, ETS 300 019-1-3, Class 3.1(E) equipment, Partly Temperature Controlled Locations ETSI EN 300-132-2 Environmental Engineering (EE); Power supply interface at the input to telecommunications equipment; Part 2: Operated by direct current (dc) ETS-300-753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications equipment EMC ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters (ERM); telecommunication network equipment; ElectroMagnetic Compatibility (EMC) requirements, Telecommunication equipment room (attended) FCC 47 CFR Part 15 Subpart B (US), Class A ECISPR 22, Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment AS/NZS CISPR 22 (Australia/New Zealand), Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology Equipment VCCI Class A (Japan), Voluntary Control Council for Interference by Information Technology Equipment Industry Canada ICES-003 Class A Safety Compliance to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme. Marked with U.S. NRTL, Canadian Safety and CE Mark. RoHS compliance DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).) DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic equipment (WEEE) CE Conformity Directive 2004/108/EC, Directive 2006/95/EC Centellis(R) 2100 Data Sheet Ordering Information Product Description Platform Core Products CENT-2100-DC2 2-slot ATCA chassis, (2) DC PEM, (2) MF106 SHMM (Silver) CENT-2100-DC2B 2-slot ATCA chassis, (2) DC PEM, (2) MF106 SHMM (Black) CENT-2100-AC2B 2-slot ATCA chassis, (2) AC PSU, (2) MF106 SHMM (Black) Optional Platform Core Products CENT-2000-UC-10GE CENT-2000/2100 user card with 10G port (SFPP module not included) C2000-UC-TA-10GE CENT-2000/2100 user card with 10G port (SFPP module not included) & Telco Alarm CENT-2000-UFP CENT-2000/2100 user card filler panel CENT-2000-PFP CENT-2000/2100 PEM/PSU filler panel - Silver CENT-2000-PFP-B CENT-2000/2100 PEM/PSU filler panel - Black C2000-RKMT-M CENT-2000/2100 19/23" frame mid mounting bracket kit (set of 4) C2000-RKMT-E CENT-2000/2100 ETSI 600MM frame mounting bracket kit C2000-RKMT-A CENT-2000/2100 ANSI 24" frame mounting bracket kit C2000-CBLTR CENT-2000/2100 cable tray bracket (one unit) AXP-F-FILL-PANEL Blank filler panel, AXP1620, AXP1440, AXP141x, AXP-640, AXP14-100/400, C2000/C2100 - Front AXP-R-FILL-PANEL Blank filler panel, AXP1620, AXP1440, AXP141x, AXP-640, AXP14-100/400, C2000/C2100 - Rear AC-PC-15A-US AC power cord, 15 Amps, 125 Volts, US & Canada connector AC-PC-15A-AUS AC power cord, 15 Amps, 250 Volts, Australia & New Zealand connector AC-PC-15A-UK AC power cord, 15 Amps, 250 Volts, UK connector AC-PC-15A-EU AC power cord, 15 Amps, 250 Volts, EU connector AC-PC-15A-JAP AC power cord, 15 Amps, 125 Volts, Japan connector FRUs CENT-2100-PEM CENT-2100 DC power entry module - Silver CENT-2100-PEM-B CENT-2100 DC power entry module - Black CENT-2000-MF106 CENT-2000/2100-R3.0 M100 style SHMM module with integrated base switch CENT-2100-FFTM CENT-2100 front fan tray module - Silver CENT-2100-FFTM-B CENT-2100 front fan tray module - Black CENT-2100-RFTM CENT-2100 rear fan tray module CENT-2000-PSU-B CENT-2000/2100 AC power supply unit - Black CENT-2000-SFM CENT-2000/2100 replacement air filter (one unit) SOLUTION SERVICES Artesyn Embedded Technologies provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh. WORLDWIDE OFFICES United States Hong Kong China +1 888 412 7832 +852 2176 3540 +86 400 8888 183 Japan Korea +81 3 5403 2730 +82 2 6004 3268 Artesyn Embedded Technologies, Artesyn, the Artesyn Embedded Technologies logo and Centellis are trademarks and service marks of Artesyn Embedded Technologies, Inc. Centellis(R) is registered in one or more countries. PICMG, AdvancedTCA, ATCA and the AdvancedTCA logo are trademarks of PICMG. Intel and Xeon are trademarks of Intel Corporation or its subsidiaries in the Unites States and other countries. Service Availability is a proprietary trademark used under license. All other names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to change without notice. (c) 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and conditions, please visit www.artesyn.com/legal. www.artesyn.com Centellis 2100 DS 14Dec2017