3.2X1.6mm SMD CHIP LED LAMP PRELIMINARY SPEC APK3216SURCK Features Description !3.2mmX1.6mm SMT LED, 1.1mm THICKNESS. The Hyper Red source color devices are made !LOW POWER CONSUMPTION. with DH InGaAlP on GaAs substrate Light Emitting !WIDE VIEWING ANGLE. Diode. !IDEAL HYPER RED FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE :2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB9134 APPROVED:J.Lu REV NO: V.2 CHECKED:Allen Liu DATE:OCT/29/2002 DRAWN:S.J.HOU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e APK3216SURCK Iv (m c d ) @ 20 m A L en s Ty p e HYPER RED (InGaAlP) V i ew i n g An g l e Min . Ty p . 21/2 70 200 90 WATER CLEAR Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Sy m b o l P ar am et er peak Peak Wavelength Hyper Red D Dominate Wavelength 1/2 D ev i c e Ty p . Un its Tes t Co n d it io n s 650 nm I F =20mA Hyper Red 635 nm I F =20mA Spectral Line Half-width Hyper Red 28 nm I F =20mA pF VF=0V;f=1MHz 2.5 V I F =20mA 10 uA V R = 5V C Capacitance Hyper Red 35 VF Forward Voltage Hyper Red 1.95 IR Reverse Current Hyper Red Max . Absolute Maximum Ratings at TA=25C P ar am et er H y p er R ed Un its Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB9134 APPROVED:J.Lu REV NO: V.2 CHECKED:Allen Liu DATE:OCT/29/2002 DRAWN:S.J.HOU PAGE: 2 OF 4 Hyper Red APK3216SURCK SPEC NO: DSAB9134 APPROVED:J.Lu REV NO: V.2 CHECKED:Allen Liu DATE:OCT/29/2002 DRAWN:S.J.HOU PAGE: 3 OF 4 APK3216SURCK SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAB9134 APPROVED:J.Lu REV NO: V.2 CHECKED:Allen Liu DATE:OCT/29/2002 DRAWN:S.J.HOU PAGE: 4 OF 4