Product Lineup > Optoelectronics > Distance Measuring Sensor > Dust Sensor Unit Dust Sensor PDF(157KB) Product Lineup BACK - NEXT LCD Dust Sensor Unit New product Image Sensors Power Devices Output Features Model No. Analog output Pulse analog output, single-shot detection of house dust, general purpose Optoelectronics GP2Y1010AU0F Pulse analog output, single-shot detection of house dust, high sensitivity GP2Y1012AU0F Pulse analog output, single-shot detection of house dust, high precision GP2Y1014AU0F Digital (PWM) output, built-in microprocessor controller, single-shot detection of house dust, high sensitivity GP2Y1023AU0F Digital (UART) output, built-in microprocessor controller, single-shot detection of house dust, high concentration GP2Y1026AU0F Digital (UART) output, built-in microprocessor controller, sensing can discriminate between PM2.5 and PM10, internal cleaning possible GP2Y1030AU0F Photocouplers Phototriac Couplers Solid State Relay Photointerrupters Digital output Proximity/Gesture Sensor Light Detectors Infrared Emitting Diode Optical-Electric Sensors Distance Measuring Sensors (1) PSD, 2PD Type Distance Measuring Sensors (2) CMOS type Distance Measuring Sensors (3) (ToF = Time of Flight) Dust Sensor Unit (Ta = 25C) Electro-optical characteristics Model No. GP2Y1010AU0F Datasheet Application Note *Built-in infrared emitting diode, photodiode and signal processing circuit *Compact, single-shot detection of house dust *Output: Analog voltage GP2Y1012AU0F *High sensitivity *Built-in infrared emitting diode, photodiode and signal processing circuit *Compact, single-shot detection of house dust *Output: Analog voltage GP2Y1014AU0F *High precision *Built-in infrared emitting diode, photodiode and signal processing circuit *Compact, single-shot detection of house dust *Output: Analog voltage GP2Y1023AU0F *High sensitivity *Built-in microcomputer *Built-in infrared emitting diode, photodiode and signal processing circuit *Compact, single-shot detection of house dust *Output: Digital signal output (PWM) IR Detecting Units for Remote Control Laser Diodes Features RF Components Sensor *High concentration *Built-in microcomputer *Built-in infrared emitting diode, photodiode GP2Y1026AU0F and signal processing circuit *Compact, single-shot detection of house dust *Output: Digital signal output (UART) GP2Y1030AU0F *Built-in microcomputer *Built-in infrared emitting diode, photodiode and signal processing circuit *Compact, single-shot detection of house dust *Sensing can discriminate between PM2.5 and PM10 *Internal cleaning possible Topr (C) Operating Detection Dissipation supply current concentration Sensitivity voltage (V) (mA) g/m 3 (TYP.) Output 0 to 600 0.50.15 V/ (0.1 mg/m 3) Precision 30% Analog voltage 0 to 240 1.00.15 V/ (0.1 mg/m 3) Precision 15% Analog voltage 0 to 600 0.50.075 V/ (0.1 mg/m 3) Precision 15% Analog voltage 0 to 240 1.40.21 Digital ms/ signal (0.1 mg/m (PWM) 3 Temperature ) Precision correction Averaging 15% 0 to 1 000 0.350.06 Digital V/ signal (0.1 mg/m (UART) 3 Temperature ) Precision correction Averaging 15% 4.5 to 5.5 TYP. 11 -10 to +65 4.75 to 5.25 3 to 5.5 TYP. 15 TYP. 25 0 to 500 Digital Precision signal 15% (UART) GP2Y1010AU0F (GP2Y1012AU0F, GP2Y1014AU0F, GP2Y1023AU0F, GP2Y1026AU0F) GP2Y1030AU0F Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive:Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. You need Adobe Reader to view PDF files. Click the banner to download. Back to top